All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: DRI Development <dri-devel@lists.freedesktop.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>,
	David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Daniel Vetter <daniel.vetter@intel.com>
Subject: Re: [PATCH 8/8] drm/modifiers: Enforce consistency between the cap an IN_FORMATS
Date: Thu, 6 May 2021 11:55:29 +0200	[thread overview]
Message-ID: <YJO9EfqeFaUdqlJE@phenom.ffwll.local> (raw)
In-Reply-To: <20210427092018.832258-8-daniel.vetter@ffwll.ch>

On Tue, Apr 27, 2021 at 11:20:18AM +0200, Daniel Vetter wrote:
> It's very confusing for userspace to have to deal with inconsistencies
> here, and some drivers screwed this up a bit. Most just ommitted the
> format list when they meant to say that only linear modifier is
> allowed, but some also meant that only implied modifiers are
> acceptable (because actually none of the planes registered supported
> modifiers).
> 
> Now that this is all done consistently across all drivers, document
> the rules and enforce it in the drm core.
> 
> v2:
> - Make the capability a link (Simon)
> - Note that all is lost before 5.1.
> 
> Acked-by: Maxime Ripard <maxime@cerno.tech>
> Cc: Simon Ser <contact@emersion.fr>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>

I merged all the driver patches to drm-misc-next, I'll resend v3 of this
one shortly.
-Daniel

> ---
>  drivers/gpu/drm/drm_plane.c   | 18 +++++++++++++++++-
>  include/drm/drm_mode_config.h |  2 ++
>  2 files changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> index 0dd43882fe7c..20c7a1665414 100644
> --- a/drivers/gpu/drm/drm_plane.c
> +++ b/drivers/gpu/drm/drm_plane.c
> @@ -128,6 +128,13 @@
>   *     pairs supported by this plane. The blob is a struct
>   *     drm_format_modifier_blob. Without this property the plane doesn't
>   *     support buffers with modifiers. Userspace cannot change this property.
> + *
> + *     Note that userspace can check the &DRM_CAP_ADDFB2_MODIFIERS driver
> + *     capability for general modifier support. If this flag is set then every
> + *     plane will have the IN_FORMATS property, even when it only supports
> + *     DRM_FORMAT_MOD_LINEAR. Before linux kernel release v5.1 there have been
> + *     various bugs in this area with inconsistencies between the capability
> + *     flag and per-plane properties.
>   */
>  
>  static unsigned int drm_num_planes(struct drm_device *dev)
> @@ -277,8 +284,14 @@ static int __drm_universal_plane_init(struct drm_device *dev,
>  			format_modifier_count++;
>  	}
>  
> -	if (format_modifier_count)
> +	/* autoset the cap and check for consistency across all planes */
> +	if (format_modifier_count) {
> +		WARN_ON(!config->allow_fb_modifiers &&
> +			!list_empty(&config->plane_list));
>  		config->allow_fb_modifiers = true;
> +	} else {
> +		WARN_ON(config->allow_fb_modifiers);
> +	}
>  
>  	plane->modifier_count = format_modifier_count;
>  	plane->modifiers = kmalloc_array(format_modifier_count,
> @@ -360,6 +373,9 @@ static int __drm_universal_plane_init(struct drm_device *dev,
>   * drm_universal_plane_init() to let the DRM managed resource infrastructure
>   * take care of cleanup and deallocation.
>   *
> + * Drivers supporting modifiers must set @format_modifiers on all their planes,
> + * even those that only support DRM_FORMAT_MOD_LINEAR.
> + *
>   * Returns:
>   * Zero on success, error code on failure.
>   */
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index ab424ddd7665..1ddf7783fdf7 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -909,6 +909,8 @@ struct drm_mode_config {
>  	 * @allow_fb_modifiers:
>  	 *
>  	 * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call.
> +	 * Note that drivers should not set this directly, it is automatically
> +	 * set in drm_universal_plane_init().
>  	 *
>  	 * IMPORTANT:
>  	 *
> -- 
> 2.31.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

WARNING: multiple messages have this Message-ID (diff)
From: Daniel Vetter <daniel@ffwll.ch>
To: DRI Development <dri-devel@lists.freedesktop.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>,
	David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	Maxime Ripard <mripard@kernel.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Simon Ser <contact@emersion.fr>,
	Daniel Vetter <daniel.vetter@intel.com>,
	Lucas Stach <l.stach@pengutronix.de>
Subject: Re: [Intel-gfx] [PATCH 8/8] drm/modifiers: Enforce consistency between the cap an IN_FORMATS
Date: Thu, 6 May 2021 11:55:29 +0200	[thread overview]
Message-ID: <YJO9EfqeFaUdqlJE@phenom.ffwll.local> (raw)
In-Reply-To: <20210427092018.832258-8-daniel.vetter@ffwll.ch>

On Tue, Apr 27, 2021 at 11:20:18AM +0200, Daniel Vetter wrote:
> It's very confusing for userspace to have to deal with inconsistencies
> here, and some drivers screwed this up a bit. Most just ommitted the
> format list when they meant to say that only linear modifier is
> allowed, but some also meant that only implied modifiers are
> acceptable (because actually none of the planes registered supported
> modifiers).
> 
> Now that this is all done consistently across all drivers, document
> the rules and enforce it in the drm core.
> 
> v2:
> - Make the capability a link (Simon)
> - Note that all is lost before 5.1.
> 
> Acked-by: Maxime Ripard <maxime@cerno.tech>
> Cc: Simon Ser <contact@emersion.fr>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>

I merged all the driver patches to drm-misc-next, I'll resend v3 of this
one shortly.
-Daniel

> ---
>  drivers/gpu/drm/drm_plane.c   | 18 +++++++++++++++++-
>  include/drm/drm_mode_config.h |  2 ++
>  2 files changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> index 0dd43882fe7c..20c7a1665414 100644
> --- a/drivers/gpu/drm/drm_plane.c
> +++ b/drivers/gpu/drm/drm_plane.c
> @@ -128,6 +128,13 @@
>   *     pairs supported by this plane. The blob is a struct
>   *     drm_format_modifier_blob. Without this property the plane doesn't
>   *     support buffers with modifiers. Userspace cannot change this property.
> + *
> + *     Note that userspace can check the &DRM_CAP_ADDFB2_MODIFIERS driver
> + *     capability for general modifier support. If this flag is set then every
> + *     plane will have the IN_FORMATS property, even when it only supports
> + *     DRM_FORMAT_MOD_LINEAR. Before linux kernel release v5.1 there have been
> + *     various bugs in this area with inconsistencies between the capability
> + *     flag and per-plane properties.
>   */
>  
>  static unsigned int drm_num_planes(struct drm_device *dev)
> @@ -277,8 +284,14 @@ static int __drm_universal_plane_init(struct drm_device *dev,
>  			format_modifier_count++;
>  	}
>  
> -	if (format_modifier_count)
> +	/* autoset the cap and check for consistency across all planes */
> +	if (format_modifier_count) {
> +		WARN_ON(!config->allow_fb_modifiers &&
> +			!list_empty(&config->plane_list));
>  		config->allow_fb_modifiers = true;
> +	} else {
> +		WARN_ON(config->allow_fb_modifiers);
> +	}
>  
>  	plane->modifier_count = format_modifier_count;
>  	plane->modifiers = kmalloc_array(format_modifier_count,
> @@ -360,6 +373,9 @@ static int __drm_universal_plane_init(struct drm_device *dev,
>   * drm_universal_plane_init() to let the DRM managed resource infrastructure
>   * take care of cleanup and deallocation.
>   *
> + * Drivers supporting modifiers must set @format_modifiers on all their planes,
> + * even those that only support DRM_FORMAT_MOD_LINEAR.
> + *
>   * Returns:
>   * Zero on success, error code on failure.
>   */
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index ab424ddd7665..1ddf7783fdf7 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -909,6 +909,8 @@ struct drm_mode_config {
>  	 * @allow_fb_modifiers:
>  	 *
>  	 * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call.
> +	 * Note that drivers should not set this directly, it is automatically
> +	 * set in drm_universal_plane_init().
>  	 *
>  	 * IMPORTANT:
>  	 *
> -- 
> 2.31.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-05-06  9:55 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-27  9:20 [PATCH 1/8] drm/arm: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-27  9:20 ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20 ` [PATCH 2/8] drm/arm/malidp: Always list modifiers Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20   ` Daniel Vetter
2021-04-27 15:41   ` Liviu Dudau
2021-04-27 15:41     ` [Intel-gfx] " Liviu Dudau
2021-04-27 15:41     ` Liviu Dudau
2021-04-27  9:20 ` [PATCH 3/8] drm/i915: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20 ` [PATCH 4/8] drm/msm/dpu1: " Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20 ` [PATCH 5/8] drm/msm/mdp4: Fix modifier support enabling Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20   ` Daniel Vetter
2021-04-27  9:20 ` [PATCH 6/8] drm/nouveau: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20   ` Daniel Vetter
2021-04-27  9:20   ` [Nouveau] " Daniel Vetter
2021-04-27  9:20 ` [PATCH 7/8] drm/stm: " Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:20   ` Daniel Vetter
2021-04-29 19:35   ` Philippe CORNU - foss
2021-04-29 19:35     ` [Intel-gfx] " Philippe CORNU - foss
2021-04-29 19:35     ` Philippe CORNU - foss
2021-04-27  9:20 ` [PATCH 8/8] drm/modifiers: Enforce consistency between the cap an IN_FORMATS Daniel Vetter
2021-04-27  9:20   ` [Intel-gfx] " Daniel Vetter
2021-04-27  9:30   ` Simon Ser
2021-04-27  9:30     ` [Intel-gfx] " Simon Ser
2021-04-27 11:32   ` Emil Velikov
2021-04-27 11:32     ` [Intel-gfx] " Emil Velikov
2021-04-27 12:22     ` Daniel Vetter
2021-04-27 12:22       ` [Intel-gfx] " Daniel Vetter
2021-05-04 14:10       ` Emil Velikov
2021-05-04 14:10         ` [Intel-gfx] " Emil Velikov
2021-05-04 14:58         ` Simon Ser
2021-05-04 14:58           ` [Intel-gfx] " Simon Ser
2021-05-04 15:48           ` Emil Velikov
2021-05-04 15:48             ` [Intel-gfx] " Emil Velikov
2021-05-04 13:38   ` Pekka Paalanen
2021-05-04 13:38     ` [Intel-gfx] " Pekka Paalanen
2021-05-05 19:24   ` Daniel Vetter
2021-05-05 19:24     ` [Intel-gfx] " Daniel Vetter
2021-05-06  9:55   ` Daniel Vetter [this message]
2021-05-06  9:55     ` Daniel Vetter
2021-04-27 10:58 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/8] drm/arm: Don't set allow_fb_modifiers explicitly Patchwork
2021-04-27 11:28 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-04-27 15:25 ` [PATCH 1/8] " Liviu Dudau
2021-04-27 15:25   ` [Intel-gfx] " Liviu Dudau
2021-04-27 15:46 ` [Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/8] " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YJO9EfqeFaUdqlJE@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maxime@cerno.tech \
    --cc=pekka.paalanen@collabora.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.