* [PATCH] driver:input:touchscreen: improve the mechanism of auto-update
@ 2021-05-10 8:35 simba.hsu
2021-06-02 5:03 ` Dmitry Torokhov
0 siblings, 1 reply; 4+ messages in thread
From: simba.hsu @ 2021-05-10 8:35 UTC (permalink / raw)
To: dmitry.torokhov, simba.hsu, furquan, seanpaul, rrangle, evgreen
Cc: linux-input, linux-kernel, KP.li, jeffrey.lin, simba.hsu
From: "simba.hsu" <simba.hsu@raydium.corp-partner.google.com>
Once auto-update has been interrupted, touch IC will be stuck in
recovery mode forever and it will lead to touch malfunction.
This patch makes auto-update available when touch IC is in
recovery mode to avoid touch malfunction.
Signed-off-by: simba.hsu <simba.hsu@rad-ic.com>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 53 ++++++++++++++++++----
1 file changed, 45 insertions(+), 8 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 4d2d22a86977..50f6fbbe4775 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -36,7 +36,8 @@
#define RM_CMD_BOOT_CHK 0x33 /* send data check */
#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
-#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
/* I2C main commands */
#define RM_CMD_QUERY_BANK 0x2B
@@ -155,6 +156,7 @@ static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
* sent first. Else, skip the header i.e. xfer[0].
*/
int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+
xfer_count -= xfer_start_idx;
ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
@@ -289,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
return 0;
}
+static int raydium_i2c_query_ts_BL_info(struct raydium_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ static const u8 get_hwid[7] = {RM_BOOT_CMD_READHWID,
+ 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00};
+ int error;
+ u8 rbuf[5] = {0, 0, 0, 0, 0};
+ u32 tmpdata = 0;
+
+ error = raydium_i2c_send(client,
+ RM_CMD_BOOT_WRT, get_hwid, sizeof(get_hwid));
+ if (error) {
+ dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+ if (error) {
+ dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_read(client,
+ RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+ if (!error) {
+ tmpdata = (rbuf[1]<<24|rbuf[2]<<16|rbuf[3]<<8|rbuf[4]);
+ ts->info.hw_ver = tmpdata;
+ dev_err(&client->dev, "HWID %08X\n", ts->info.hw_ver);
+ } else {
+ ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
+ dev_err(&client->dev, "raydium_i2c_read HWID failed, %X, %X, %X, %X\n",
+ rbuf[1], rbuf[2], rbuf[3], rbuf[4]);
+ }
+ ts->info.main_ver = 0xff;
+ ts->info.sub_ver = 0xff;
+
+ return error;
+}
static int raydium_i2c_query_ts_info(struct raydium_data *ts)
{
@@ -388,13 +428,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
if (error)
ts->boot_mode = RAYDIUM_TS_BLDR;
- if (ts->boot_mode == RAYDIUM_TS_BLDR) {
- ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
- ts->info.main_ver = 0xff;
- ts->info.sub_ver = 0xff;
- } else {
+ if (ts->boot_mode == RAYDIUM_TS_BLDR)
+ raydium_i2c_query_ts_BL_info(ts);
+ else
raydium_i2c_query_ts_info(ts);
- }
return error;
}
@@ -1218,7 +1255,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
raydium_i2c_suspend, raydium_i2c_resume);
static const struct i2c_device_id raydium_i2c_id[] = {
- { "raydium_i2c" , 0 },
+ { "raydium_i2c", 0 },
{ "rm32380", 0 },
{ /* sentinel */ }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] driver:input:touchscreen: improve the mechanism of auto-update
2021-05-10 8:35 [PATCH] driver:input:touchscreen: improve the mechanism of auto-update simba.hsu
@ 2021-06-02 5:03 ` Dmitry Torokhov
0 siblings, 0 replies; 4+ messages in thread
From: Dmitry Torokhov @ 2021-06-02 5:03 UTC (permalink / raw)
To: simba.hsu
Cc: simba.hsu, furquan, seanpaul, rrangle, evgreen, linux-input,
linux-kernel, KP.li, jeffrey.lin
Hi,
On Mon, May 10, 2021 at 04:35:36PM +0800, simba.hsu wrote:
> From: "simba.hsu" <simba.hsu@raydium.corp-partner.google.com>
>
> Once auto-update has been interrupted, touch IC will be stuck in
> recovery mode forever and it will lead to touch malfunction.
> This patch makes auto-update available when touch IC is in
> recovery mode to avoid touch malfunction.
>
> Signed-off-by: simba.hsu <simba.hsu@rad-ic.com>
> ---
> drivers/input/touchscreen/raydium_i2c_ts.c | 53 ++++++++++++++++++----
> 1 file changed, 45 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
> index 4d2d22a86977..50f6fbbe4775 100644
> --- a/drivers/input/touchscreen/raydium_i2c_ts.c
> +++ b/drivers/input/touchscreen/raydium_i2c_ts.c
> @@ -36,7 +36,8 @@
> #define RM_CMD_BOOT_CHK 0x33 /* send data check */
> #define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
>
> -#define RM_BOOT_RDY 0xFF /* bl data ready */
> +#define RM_BOOT_RDY 0xFF /* bl data ready */
> +#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
>
> /* I2C main commands */
> #define RM_CMD_QUERY_BANK 0x2B
> @@ -155,6 +156,7 @@ static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
> * sent first. Else, skip the header i.e. xfer[0].
> */
> int xfer_start_idx = (addr > 0xff) ? 0 : 1;
> +
> xfer_count -= xfer_start_idx;
>
> ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
> @@ -289,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
>
> return 0;
> }
> +static int raydium_i2c_query_ts_BL_info(struct raydium_data *ts)
> +{
> + struct i2c_client *client = ts->client;
> + static const u8 get_hwid[7] = {RM_BOOT_CMD_READHWID,
> + 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00};
> + int error;
> + u8 rbuf[5] = {0, 0, 0, 0, 0};
> + u32 tmpdata = 0;
> +
> + error = raydium_i2c_send(client,
> + RM_CMD_BOOT_WRT, get_hwid, sizeof(get_hwid));
> + if (error) {
> + dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
> + return error;
> + }
> +
> + error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
> + if (error) {
> + dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
> + return error;
> + }
> +
> + error = raydium_i2c_read(client,
> + RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
> + if (!error) {
> + tmpdata = (rbuf[1]<<24|rbuf[2]<<16|rbuf[3]<<8|rbuf[4]);
This looks like a big-endian data. Is this correct? If so, could you
please see if the version of the patch below still works for you?
Thanks!
--
Dmitry
Input: raydium_i2c_ts - read device version in bootloader mode
From: simba.hsu <simba.hsu@rad-ic.com>
Add support reading device ID when controller is in bootloader mode, which
may happen if firmware update has been interrupted.
Signed-off-by: simba.hsu <simba.hsu@rad-ic.com>
Link: https://lore.kernel.org/r/20210510083536.41925-1-simba.hsu@rad-ic.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 52 ++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 8 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 4d2d22a86977..c7bf0c5360c9 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -36,7 +36,8 @@
#define RM_CMD_BOOT_CHK 0x33 /* send data check */
#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
-#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
/* I2C main commands */
#define RM_CMD_QUERY_BANK 0x2B
@@ -290,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
return 0;
}
+static int raydium_i2c_query_ts_bootloader_info(struct raydium_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ static const u8 get_hwid[] = { RM_BOOT_CMD_READHWID,
+ 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00 };
+ u8 rbuf[5] = { 0 };
+ u32 hw_ver;
+ int error;
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_WRT,
+ get_hwid, sizeof(get_hwid));
+ if (error) {
+ dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+ if (error) {
+ dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+ if (error) {
+ dev_err(&client->dev, "Read HWID command failed: %d (%4ph)\n",
+ error, rbuf + 1);
+ hw_ver = 0xffffffffUL;
+ } else {
+ hw_ver = get_unaligned_be32(rbuf + 1);
+ }
+
+ ts->info.hw_ver = cpu_to_le32(hw_ver);
+ ts->info.main_ver = 0xff;
+ ts->info.sub_ver = 0xff;
+
+ return error;
+}
+
static int raydium_i2c_query_ts_info(struct raydium_data *ts)
{
struct i2c_client *client = ts->client;
@@ -388,13 +427,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
if (error)
ts->boot_mode = RAYDIUM_TS_BLDR;
- if (ts->boot_mode == RAYDIUM_TS_BLDR) {
- ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
- ts->info.main_ver = 0xff;
- ts->info.sub_ver = 0xff;
- } else {
+ if (ts->boot_mode == RAYDIUM_TS_BLDR)
+ raydium_i2c_query_ts_bootloader_info(ts);
+ else
raydium_i2c_query_ts_info(ts);
- }
return error;
}
@@ -1218,7 +1254,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
raydium_i2c_suspend, raydium_i2c_resume);
static const struct i2c_device_id raydium_i2c_id[] = {
- { "raydium_i2c" , 0 },
+ { "raydium_i2c", 0 },
{ "rm32380", 0 },
{ /* sentinel */ }
};
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] driver:input:touchscreen: improve the mechanism of auto-update
@ 2021-05-26 2:53 simba.hsu
0 siblings, 0 replies; 4+ messages in thread
From: simba.hsu @ 2021-05-26 2:53 UTC (permalink / raw)
To: dmitry.torokhov, simba.hsu, furquan, seanpaul, rrangle, adurbin
Cc: linux-input, linux-kernel, KP.li, jeffrey.lin
Once auto-update has been interrupted, touch IC will be stuck in
recovery mode forever and it will lead to touch malfunction.
This patch makes auto-update available when touch IC is in
recovery mode to avoid touch malfunction
Signed-off-by: simba.hsu <simba.hsu@rad-ic.com>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 53 ++++++++++++++++++----
1 file changed, 45 insertions(+), 8 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 4d2d22a86977..50f6fbbe4775 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -36,7 +36,8 @@
#define RM_CMD_BOOT_CHK 0x33 /* send data check */
#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
-#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
/* I2C main commands */
#define RM_CMD_QUERY_BANK 0x2B
@@ -155,6 +156,7 @@ static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
* sent first. Else, skip the header i.e. xfer[0].
*/
int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+
xfer_count -= xfer_start_idx;
ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
@@ -289,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
return 0;
}
+static int raydium_i2c_query_ts_BL_info(struct raydium_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ static const u8 get_hwid[7] = {RM_BOOT_CMD_READHWID,
+ 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00};
+ int error;
+ u8 rbuf[5] = {0, 0, 0, 0, 0};
+ u32 tmpdata = 0;
+
+ error = raydium_i2c_send(client,
+ RM_CMD_BOOT_WRT, get_hwid, sizeof(get_hwid));
+ if (error) {
+ dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+ if (error) {
+ dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_read(client,
+ RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+ if (!error) {
+ tmpdata = (rbuf[1]<<24|rbuf[2]<<16|rbuf[3]<<8|rbuf[4]);
+ ts->info.hw_ver = tmpdata;
+ dev_err(&client->dev, "HWID %08X\n", ts->info.hw_ver);
+ } else {
+ ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
+ dev_err(&client->dev, "raydium_i2c_read HWID failed, %X, %X, %X, %X\n",
+ rbuf[1], rbuf[2], rbuf[3], rbuf[4]);
+ }
+ ts->info.main_ver = 0xff;
+ ts->info.sub_ver = 0xff;
+
+ return error;
+}
static int raydium_i2c_query_ts_info(struct raydium_data *ts)
{
@@ -388,13 +428,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
if (error)
ts->boot_mode = RAYDIUM_TS_BLDR;
- if (ts->boot_mode == RAYDIUM_TS_BLDR) {
- ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
- ts->info.main_ver = 0xff;
- ts->info.sub_ver = 0xff;
- } else {
+ if (ts->boot_mode == RAYDIUM_TS_BLDR)
+ raydium_i2c_query_ts_BL_info(ts);
+ else
raydium_i2c_query_ts_info(ts);
- }
return error;
}
@@ -1218,7 +1255,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
raydium_i2c_suspend, raydium_i2c_resume);
static const struct i2c_device_id raydium_i2c_id[] = {
- { "raydium_i2c" , 0 },
+ { "raydium_i2c", 0 },
{ "rm32380", 0 },
{ /* sentinel */ }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] driver:input:touchscreen: improve the mechanism of auto-update
@ 2021-05-10 8:27 simba.hsu
0 siblings, 0 replies; 4+ messages in thread
From: simba.hsu @ 2021-05-10 8:27 UTC (permalink / raw)
To: dmitry.torokhov, simba.hsu, furquan, seanpaul, rrangle
Cc: linux-input, linux-kernel, KP.li, jeffrey.lin, simba.hsu
From: "simba.hsu" <simba.hsu@raydium.corp-partner.google.com>
Once auto-update has been interrupted, touch IC will be stuck in
recovery mode forever and it will lead to touch malfunction.
This patch makes auto-update available when touch IC is in
recovery mode to avoid touch malfunction.
Signed-off-by: simba.hsu <simba.hsu@rad-ic.com>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 53 ++++++++++++++++++----
1 file changed, 45 insertions(+), 8 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 4d2d22a86977..50f6fbbe4775 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -36,7 +36,8 @@
#define RM_CMD_BOOT_CHK 0x33 /* send data check */
#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/
-#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_RDY 0xFF /* bl data ready */
+#define RM_BOOT_CMD_READHWID 0x0E /* read hwid */
/* I2C main commands */
#define RM_CMD_QUERY_BANK 0x2B
@@ -155,6 +156,7 @@ static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
* sent first. Else, skip the header i.e. xfer[0].
*/
int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+
xfer_count -= xfer_start_idx;
ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
@@ -289,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
return 0;
}
+static int raydium_i2c_query_ts_BL_info(struct raydium_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ static const u8 get_hwid[7] = {RM_BOOT_CMD_READHWID,
+ 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00};
+ int error;
+ u8 rbuf[5] = {0, 0, 0, 0, 0};
+ u32 tmpdata = 0;
+
+ error = raydium_i2c_send(client,
+ RM_CMD_BOOT_WRT, get_hwid, sizeof(get_hwid));
+ if (error) {
+ dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+ if (error) {
+ dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+ return error;
+ }
+
+ error = raydium_i2c_read(client,
+ RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+ if (!error) {
+ tmpdata = (rbuf[1]<<24|rbuf[2]<<16|rbuf[3]<<8|rbuf[4]);
+ ts->info.hw_ver = tmpdata;
+ dev_err(&client->dev, "HWID %08X\n", ts->info.hw_ver);
+ } else {
+ ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
+ dev_err(&client->dev, "raydium_i2c_read HWID failed, %X, %X, %X, %X\n",
+ rbuf[1], rbuf[2], rbuf[3], rbuf[4]);
+ }
+ ts->info.main_ver = 0xff;
+ ts->info.sub_ver = 0xff;
+
+ return error;
+}
static int raydium_i2c_query_ts_info(struct raydium_data *ts)
{
@@ -388,13 +428,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
if (error)
ts->boot_mode = RAYDIUM_TS_BLDR;
- if (ts->boot_mode == RAYDIUM_TS_BLDR) {
- ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
- ts->info.main_ver = 0xff;
- ts->info.sub_ver = 0xff;
- } else {
+ if (ts->boot_mode == RAYDIUM_TS_BLDR)
+ raydium_i2c_query_ts_BL_info(ts);
+ else
raydium_i2c_query_ts_info(ts);
- }
return error;
}
@@ -1218,7 +1255,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
raydium_i2c_suspend, raydium_i2c_resume);
static const struct i2c_device_id raydium_i2c_id[] = {
- { "raydium_i2c" , 0 },
+ { "raydium_i2c", 0 },
{ "rm32380", 0 },
{ /* sentinel */ }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-02 5:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-10 8:35 [PATCH] driver:input:touchscreen: improve the mechanism of auto-update simba.hsu
2021-06-02 5:03 ` Dmitry Torokhov
-- strict thread matches above, loose matches on Subject: below --
2021-05-26 2:53 simba.hsu
2021-05-10 8:27 simba.hsu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.