Re: [PATCH v7 4/4] fpga: versal-fpga: Add versal fpga manager driver

[Greg KH <gregkh@linuxfoundation.org>]

On Fri, Jun 04, 2021 at 05:03:32PM +0530, Nava kishore Manne wrote:
> Add support for Xilinx Versal FPGA manager.
> 
> PDI source type can be DDR, OCM, QSPI flash etc..
> But driver allocates memory always from DDR, Since driver supports only
> DDR source type.
> 
> Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> Reviewed-by: Moritz Fischer <mdf@kernel.org>
> ---
> Changes for v2:
>               -Updated the Fpga Mgr registrations call's
>                to 5.11
>               -Fixed some minor coding issues as suggested by
>                Moritz.
> 
> Changes for v3:
>               -Rewritten the Versal fpga Kconfig contents.
> 
> Changes for v4:
>               -Rebased the changes on linux-next.
>                No functional changes.
> 
> Changes for v5:
>               -None.
> 
> Changes for v6:
>               -None.
> 
> Changes for v7:
>               -Updated driver to remove unwated priv struct dependency.
> 
>  drivers/fpga/Kconfig       |  9 ++++
>  drivers/fpga/Makefile      |  1 +
>  drivers/fpga/versal-fpga.c | 96 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 106 insertions(+)
>  create mode 100644 drivers/fpga/versal-fpga.c
> 
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 33e15058d0dc..92c20b92357a 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -234,4 +234,13 @@ config FPGA_MGR_ZYNQMP_FPGA
>  	  to configure the programmable logic(PL) through PS
>  	  on ZynqMP SoC.
>  
> +config FPGA_MGR_VERSAL_FPGA
> +	tristate "Xilinx Versal FPGA"
> +	depends on ARCH_ZYNQMP || COMPILE_TEST
> +	help
> +	  Select this option to enable FPGA manager driver support for
> +	  Xilinx Versal SoC. This driver uses the firmware interface to
> +	  configure the programmable logic(PL).
> +
> +	  To compile this as a module, choose M here.
>  endif # FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 18dc9885883a..0bff783d1b61 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
>  obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
>  obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
>  obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
> +obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)      += versal-fpga.o
>  obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
>  obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
>  
> diff --git a/drivers/fpga/versal-fpga.c b/drivers/fpga/versal-fpga.c
> new file mode 100644
> index 000000000000..1bd312a31b23
> --- /dev/null
> +++ b/drivers/fpga/versal-fpga.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019-2021 Xilinx, Inc.
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/string.h>
> +#include <linux/firmware/xlnx-zynqmp.h>
> +
> +static int versal_fpga_ops_write_init(struct fpga_manager *mgr,
> +				      struct fpga_image_info *info,
> +				      const char *buf, size_t size)
> +{
> +	return 0;

Why have this if it does nothing?

> +}
> +
> +static int versal_fpga_ops_write(struct fpga_manager *mgr,
> +				 const char *buf, size_t size)
> +{
> +	dma_addr_t dma_addr = 0;
> +	char *kbuf;
> +	int ret;
> +
> +	kbuf = dma_alloc_coherent(mgr->dev.parent, size, &dma_addr, GFP_KERNEL);
> +	if (!kbuf)
> +		return -ENOMEM;
> +
> +	memcpy(kbuf, buf, size);
> +	ret = zynqmp_pm_load_pdi(PDI_SRC_DDR, dma_addr);
> +	dma_free_coherent(mgr->dev.parent, size, kbuf, dma_addr);
> +
> +	return ret;
> +}
> +
> +static int versal_fpga_ops_write_complete(struct fpga_manager *mgr,
> +					  struct fpga_image_info *info)
> +{
> +	return 0;

Same here, why have this at all?

> +}
> +
> +static enum fpga_mgr_states versal_fpga_ops_state(struct fpga_manager *mgr)
> +{
> +	return FPGA_MGR_STATE_UNKNOWN;

Shouln't that be the default state of the fpga manager if there is no
state function callback?

This driver should just need a write and probe function, and that's it,
why make it more complex?

thanks,

greg k-h