* [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible @ 2021-06-29 0:45 ` Bjorn Andersson 0 siblings, 0 replies; 8+ messages in thread From: Bjorn Andersson @ 2021-06-29 0:45 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Manu Gautam Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel Add a compatible for the sc8180x PCIe PHY. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index f0497b8623ad..242560ff52a4 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -27,6 +27,7 @@ properties: - qcom,msm8998-qmp-ufs-phy - qcom,msm8998-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy + - qcom,sc8180x-qmp-pcie-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qhp-pcie-phy @@ -326,6 +327,7 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdx55-qmp-pcie-phy -- 2.29.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible @ 2021-06-29 0:45 ` Bjorn Andersson 0 siblings, 0 replies; 8+ messages in thread From: Bjorn Andersson @ 2021-06-29 0:45 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Manu Gautam Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel Add a compatible for the sc8180x PCIe PHY. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index f0497b8623ad..242560ff52a4 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -27,6 +27,7 @@ properties: - qcom,msm8998-qmp-ufs-phy - qcom,msm8998-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy + - qcom,sc8180x-qmp-pcie-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qhp-pcie-phy @@ -326,6 +327,7 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdx55-qmp-pcie-phy -- 2.29.2 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] phy: qcom-qmp: Add sc8180x PCIe support 2021-06-29 0:45 ` Bjorn Andersson @ 2021-06-29 0:45 ` Bjorn Andersson -1 siblings, 0 replies; 8+ messages in thread From: Bjorn Andersson @ 2021-06-29 0:45 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Manu Gautam Cc: Rob Herring, linux-arm-msm, linux-phy, devicetree, linux-kernel The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically used to connect things such as a modem or NVME storage device. Add the programming sequence to get the PHYs up and running. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 140 ++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index b772ad4bf23d..8556d08ebe60 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -2035,6 +2035,113 @@ static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20), }; +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), +}; + static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08), QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34), @@ -3440,6 +3547,36 @@ static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = { .dp_cfg = &sc8180x_dpphy_cfg, }; +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 1, + + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl), + .tx_tbl = sc8180x_qmp_pcie_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl), + .rx_tbl = sc8180x_qmp_pcie_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl), + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl), + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl, + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl), + .clk_list = sdm845_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = sm8250_pcie_regs_layout, + + .start_ctrl = PCS_START | SERDES_START, + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = 995, /* us */ + .pwrdn_delay_max = 1005, /* us */ +}; + static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -5272,6 +5409,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sc7180-qmp-usb3-dp-phy", /* It's a combo phy */ + }, { + .compatible = "qcom,sc8180x-qmp-pcie-phy", + .data = &sc8180x_pciephy_cfg, }, { .compatible = "qcom,sc8180x-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, -- 2.29.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] phy: qcom-qmp: Add sc8180x PCIe support @ 2021-06-29 0:45 ` Bjorn Andersson 0 siblings, 0 replies; 8+ messages in thread From: Bjorn Andersson @ 2021-06-29 0:45 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Manu Gautam Cc: Rob Herring, linux-arm-msm, linux-phy, devicetree, linux-kernel The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically used to connect things such as a modem or NVME storage device. Add the programming sequence to get the PHYs up and running. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 140 ++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index b772ad4bf23d..8556d08ebe60 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -2035,6 +2035,113 @@ static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20), }; +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x42), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0xb4), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x68), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x90), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x5), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x6e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xd4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x39), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xe4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xec), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x39), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RCLK_AUXDATA_SEL, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x03), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RATE_SLEW_CNTRL1, 0x0b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x01), +}; + +static const struct qmp_phy_init_tbl sc8180x_qmp_pcie_pcs_misc_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), +}; + static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08), QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34), @@ -3440,6 +3547,36 @@ static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = { .dp_cfg = &sc8180x_dpphy_cfg, }; +static const struct qmp_phy_cfg sc8180x_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 1, + + .serdes_tbl = sm8250_qmp_pcie_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl), + .tx_tbl = sc8180x_qmp_pcie_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl), + .rx_tbl = sc8180x_qmp_pcie_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_rx_tbl), + .pcs_tbl = sc8180x_qmp_pcie_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_tbl), + .pcs_misc_tbl = sc8180x_qmp_pcie_pcs_misc_tbl, + .pcs_misc_tbl_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl), + .clk_list = sdm845_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = sm8250_pcie_regs_layout, + + .start_ctrl = PCS_START | SERDES_START, + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = 995, /* us */ + .pwrdn_delay_max = 1005, /* us */ +}; + static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -5272,6 +5409,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sc7180-qmp-usb3-dp-phy", /* It's a combo phy */ + }, { + .compatible = "qcom,sc8180x-qmp-pcie-phy", + .data = &sc8180x_pciephy_cfg, }, { .compatible = "qcom,sc8180x-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, -- 2.29.2 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible 2021-06-29 0:45 ` Bjorn Andersson @ 2021-07-14 20:57 ` Rob Herring -1 siblings, 0 replies; 8+ messages in thread From: Rob Herring @ 2021-07-14 20:57 UTC (permalink / raw) To: Bjorn Andersson Cc: Kishon Vijay Abraham I, devicetree, Vinod Koul, linux-phy, linux-kernel, linux-arm-msm, Manu Gautam, Rob Herring On Mon, 28 Jun 2021 17:45:08 -0700, Bjorn Andersson wrote: > Add a compatible for the sc8180x PCIe PHY. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible @ 2021-07-14 20:57 ` Rob Herring 0 siblings, 0 replies; 8+ messages in thread From: Rob Herring @ 2021-07-14 20:57 UTC (permalink / raw) To: Bjorn Andersson Cc: Kishon Vijay Abraham I, devicetree, Vinod Koul, linux-phy, linux-kernel, linux-arm-msm, Manu Gautam, Rob Herring On Mon, 28 Jun 2021 17:45:08 -0700, Bjorn Andersson wrote: > Add a compatible for the sc8180x PCIe PHY. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible 2021-06-29 0:45 ` Bjorn Andersson @ 2021-07-20 10:35 ` Vinod Koul -1 siblings, 0 replies; 8+ messages in thread From: Vinod Koul @ 2021-07-20 10:35 UTC (permalink / raw) To: Bjorn Andersson Cc: Kishon Vijay Abraham I, Rob Herring, Manu Gautam, linux-arm-msm, linux-phy, devicetree, linux-kernel On 28-06-21, 17:45, Bjorn Andersson wrote: > Add a compatible for the sc8180x PCIe PHY. Applied both, thanks -- ~Vinod ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible @ 2021-07-20 10:35 ` Vinod Koul 0 siblings, 0 replies; 8+ messages in thread From: Vinod Koul @ 2021-07-20 10:35 UTC (permalink / raw) To: Bjorn Andersson Cc: Kishon Vijay Abraham I, Rob Herring, Manu Gautam, linux-arm-msm, linux-phy, devicetree, linux-kernel On 28-06-21, 17:45, Bjorn Andersson wrote: > Add a compatible for the sc8180x PCIe PHY. Applied both, thanks -- ~Vinod -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-07-20 10:36 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-29 0:45 [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible Bjorn Andersson 2021-06-29 0:45 ` Bjorn Andersson 2021-06-29 0:45 ` [PATCH 2/2] phy: qcom-qmp: Add sc8180x PCIe support Bjorn Andersson 2021-06-29 0:45 ` Bjorn Andersson 2021-07-14 20:57 ` [PATCH 1/2] dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible Rob Herring 2021-07-14 20:57 ` Rob Herring 2021-07-20 10:35 ` Vinod Koul 2021-07-20 10:35 ` Vinod Koul
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.