* FAILED: patch "[PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references" failed to apply to 5.10-stable tree
@ 2021-07-22 18:48 gregkh
2021-08-11 20:57 ` Sudip Mukherjee
0 siblings, 1 reply; 3+ messages in thread
From: gregkh @ 2021-07-22 18:48 UTC (permalink / raw)
To: aford173, geert+renesas; +Cc: stable
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ebc666f39ff67a01e748c34d670ddf05a9e45220 Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Thu, 13 May 2021 06:46:16 -0500
Subject: [PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index d8046fedf9c1..e3c8b2fe143e 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@ &du_out_rgb {
&ehci0 {
dr_mode = "otg";
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&ehci1 {
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&hdmi0 {
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: FAILED: patch "[PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references" failed to apply to 5.10-stable tree
2021-07-22 18:48 FAILED: patch "[PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references" failed to apply to 5.10-stable tree gregkh
@ 2021-08-11 20:57 ` Sudip Mukherjee
2021-08-13 8:46 ` Greg KH
0 siblings, 1 reply; 3+ messages in thread
From: Sudip Mukherjee @ 2021-08-11 20:57 UTC (permalink / raw)
To: gregkh; +Cc: aford173, geert+renesas, stable
[-- Attachment #1: Type: text/plain, Size: 605 bytes --]
Hi Greg,
On Thu, Jul 22, 2021 at 08:48:25PM +0200, gregkh@linuxfoundation.org wrote:
>
> The patch below does not apply to the 5.10-stable tree.
> If someone wants it applied there, or to any other stable or longterm
> tree, then please email the backport, including the original git commit
> id to <stable@vger.kernel.org>.
There was another failed mail for 56bc54496f5d ("arm64: dts: renesas:
beacon: Fix USB extal reference"). So, that one and this one together
with e1076ce07b77 ("arm64: dts: renesas: rzg2: Add usb2_clksel to
RZ/G2 M/N/H") which is needed for these two to work.
--
Regards
Sudip
[-- Attachment #2: 0001-arm64-dts-renesas-rzg2-Add-usb2_clksel-to-RZ-G2-M-N-.patch --]
[-- Type: text/x-diff, Size: 4001 bytes --]
From df0f82caf1b0c8dbb9178bd88743d0d18d483d70 Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Mon, 28 Dec 2020 14:22:21 -0600
Subject: [PATCH 1/3] arm64: dts: renesas: rzg2: Add usb2_clksel to RZ/G2 M/N/H
commit e1076ce07b7736aed269c5d8154f2442970d9137 upstream
Per the reference manual for the RZ/G Series, 2nd Generation,
the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to
choose between a crystal oscillator and an external oscillator.
Because only boards that need this should enable it, it's marked
as disabled by default for backwards compatibility with existing
boards.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201228202221.2327468-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 15 +++++++++++++++
3 files changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index db091fa75115..c58a0846db50 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -836,6 +836,21 @@ hsusb: usb@e6590000 {
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 39a1a26ffb54..9ebf6e58ba31 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -709,6 +709,21 @@ hsusb: usb@e6590000 {
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774b1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774b1-usb-dmac",
"renesas,usb-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index c29643442e91..708258696b4f 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -890,6 +890,21 @@ hsusb: usb@e6590000 {
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774e1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774e1-usb-dmac",
"renesas,usb-dmac";
--
2.30.2
[-- Attachment #3: 0002-arm64-dts-renesas-beacon-Fix-USB-extal-reference.patch --]
[-- Type: text/x-diff, Size: 1457 bytes --]
From 0c3801de5390e3243907854b460644087b94267f Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Thu, 13 May 2021 06:46:15 -0500
Subject: [PATCH 2/3] arm64: dts: renesas: beacon: Fix USB extal reference
commit 56bc54496f5d6bc638127bfc9df3742cbf0039e7 upstream
The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel. Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 289cf711307d..e3773b05c403 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -295,8 +295,10 @@ &sdhi3 {
status = "okay";
};
-&usb_extal_clk {
- clock-frequency = <50000000>;
+&usb2_clksel {
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&versaclock5 3>, <&usb3s0_clk>;
+ status = "okay";
};
&usb3s0_clk {
--
2.30.2
[-- Attachment #4: 0003-arm64-dts-renesas-beacon-Fix-USB-ref-clock-reference.patch --]
[-- Type: text/x-diff, Size: 1907 bytes --]
From f3e18e9eec20eced47845842d143b1fdb182600a Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Thu, 13 May 2021 06:46:16 -0500
Subject: [PATCH 3/3] arm64: dts: renesas: beacon: Fix USB ref clock references
commit ebc666f39ff67a01e748c34d670ddf05a9e45220 upstream
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 597388f87127..bc4bb5dd8bae 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@ &du_out_rgb {
&ehci0 {
dr_mode = "otg";
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&ehci1 {
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&hdmi0 {
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: FAILED: patch "[PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references" failed to apply to 5.10-stable tree
2021-08-11 20:57 ` Sudip Mukherjee
@ 2021-08-13 8:46 ` Greg KH
0 siblings, 0 replies; 3+ messages in thread
From: Greg KH @ 2021-08-13 8:46 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: aford173, geert+renesas, stable
On Wed, Aug 11, 2021 at 09:57:29PM +0100, Sudip Mukherjee wrote:
> Hi Greg,
>
> On Thu, Jul 22, 2021 at 08:48:25PM +0200, gregkh@linuxfoundation.org wrote:
> >
> > The patch below does not apply to the 5.10-stable tree.
> > If someone wants it applied there, or to any other stable or longterm
> > tree, then please email the backport, including the original git commit
> > id to <stable@vger.kernel.org>.
>
> There was another failed mail for 56bc54496f5d ("arm64: dts: renesas:
> beacon: Fix USB extal reference"). So, that one and this one together
> with e1076ce07b77 ("arm64: dts: renesas: rzg2: Add usb2_clksel to
> RZ/G2 M/N/H") which is needed for these two to work.
Now queued up, thanks.
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-13 8:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-22 18:48 FAILED: patch "[PATCH] arm64: dts: renesas: beacon: Fix USB ref clock references" failed to apply to 5.10-stable tree gregkh
2021-08-11 20:57 ` Sudip Mukherjee
2021-08-13 8:46 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.