All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>,
	Wong Vee Khee <veekhee@gmail.com>
Subject: Re: [PATCH net v1 1/1] net: stmmac: fix EEE init issue when paired with EEE capable PHYs
Date: Fri, 1 Oct 2021 01:31:36 +0200	[thread overview]
Message-ID: <YVZI2GWxUNZdL2SX@lunn.ch> (raw)
In-Reply-To: <20210930064436.1502516-1-vee.khee.wong@linux.intel.com>

On Thu, Sep 30, 2021 at 02:44:36PM +0800, Wong Vee Khee wrote:
> When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
> and the PHY is advertising EEE by default, we need to enable EEE on the
> xPCS side too, instead of having user to manually trigger the enabling
> config via ethtool.
> 
> Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().
> 
> Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
> Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 553c4403258a..981ccf47dcea 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -486,6 +486,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
>  		timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
>  		stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
>  				     eee_tw_timer);
> +		if (priv->hw->xpcs)
> +			xpcs_config_eee(priv->hw->xpcs,
> +					priv->plat->mult_fact_100ns,
> +					true);
>  	}


       /* Check if it needs to be deactivated */
        if (!priv->eee_active) {
                if (priv->eee_enabled) {
                        netdev_dbg(priv->dev, "disable EEE\n");
                        stmmac_lpi_entry_timer_config(priv, 0);
                        del_timer_sync(&priv->eee_ctrl_timer);
                        stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer);
                }
                mutex_unlock(&priv->lock);
                return false;
        }

Don't you want to turn it of in here?

      Andrew

WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew@lunn.ch>
To: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>,
	Wong Vee Khee <veekhee@gmail.com>
Subject: Re: [PATCH net v1 1/1] net: stmmac: fix EEE init issue when paired with EEE capable PHYs
Date: Fri, 1 Oct 2021 01:31:36 +0200	[thread overview]
Message-ID: <YVZI2GWxUNZdL2SX@lunn.ch> (raw)
In-Reply-To: <20210930064436.1502516-1-vee.khee.wong@linux.intel.com>

On Thu, Sep 30, 2021 at 02:44:36PM +0800, Wong Vee Khee wrote:
> When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
> and the PHY is advertising EEE by default, we need to enable EEE on the
> xPCS side too, instead of having user to manually trigger the enabling
> config via ethtool.
> 
> Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().
> 
> Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
> Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 553c4403258a..981ccf47dcea 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -486,6 +486,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
>  		timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
>  		stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
>  				     eee_tw_timer);
> +		if (priv->hw->xpcs)
> +			xpcs_config_eee(priv->hw->xpcs,
> +					priv->plat->mult_fact_100ns,
> +					true);
>  	}


       /* Check if it needs to be deactivated */
        if (!priv->eee_active) {
                if (priv->eee_enabled) {
                        netdev_dbg(priv->dev, "disable EEE\n");
                        stmmac_lpi_entry_timer_config(priv, 0);
                        del_timer_sync(&priv->eee_ctrl_timer);
                        stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer);
                }
                mutex_unlock(&priv->lock);
                return false;
        }

Don't you want to turn it of in here?

      Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-09-30 23:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-30  6:44 [PATCH net v1 1/1] net: stmmac: fix EEE init issue when paired with EEE capable PHYs Wong Vee Khee
2021-09-30  6:44 ` Wong Vee Khee
2021-09-30 13:20 ` patchwork-bot+netdevbpf
2021-09-30 13:20   ` patchwork-bot+netdevbpf
2021-09-30 23:31 ` Andrew Lunn [this message]
2021-09-30 23:31   ` Andrew Lunn
2021-10-05 11:15   ` Wong Vee Khee
2021-10-05 11:15     ` Wong Vee Khee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YVZI2GWxUNZdL2SX@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=alexandre.torgue@foss.st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=michael.wei.hong.sit@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=vee.khee.wong@linux.intel.com \
    --cc=veekhee@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.