* [PATCH 0/2] reset: lan996x: Add reset driver for lan966x phys @ 2021-10-19 11:52 Horatiu Vultur 2021-10-19 11:52 ` [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings Horatiu Vultur 2021-10-19 11:52 ` [PATCH 2/2] reset: lan966x: Add support for the phy reset on lan966x Horatiu Vultur 0 siblings, 2 replies; 6+ messages in thread From: Horatiu Vultur @ 2021-10-19 11:52 UTC (permalink / raw) To: p.zabel, robh+dt; +Cc: devicetree, linux-kernel, Horatiu Vultur The lan966x switch is reseted using the 'sparx5-switch-reset' but the PHYs are still keep in reset. Therefore add this patch to release the HW reset of the PHYs. Horatiu Vultur (2): dt-bindings: reset: lan966x phy reset driver bindings reset: lan966x: Add support for the phy reset on lan966x .../bindings/reset/lan966x-phy,rst.yaml | 53 +++++++++++ drivers/reset/Kconfig | 8 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-microchip-lan966x-phy.c | 93 +++++++++++++++++++ 4 files changed, 155 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml create mode 100644 drivers/reset/reset-microchip-lan966x-phy.c -- 2.33.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings 2021-10-19 11:52 [PATCH 0/2] reset: lan996x: Add reset driver for lan966x phys Horatiu Vultur @ 2021-10-19 11:52 ` Horatiu Vultur 2021-10-27 3:13 ` Rob Herring 2021-10-19 11:52 ` [PATCH 2/2] reset: lan966x: Add support for the phy reset on lan966x Horatiu Vultur 1 sibling, 1 reply; 6+ messages in thread From: Horatiu Vultur @ 2021-10-19 11:52 UTC (permalink / raw) To: p.zabel, robh+dt; +Cc: devicetree, linux-kernel, Horatiu Vultur Document the lan966x phy reset device driving bindings. It is using register access for the internal PHYs and toggles GPIO for external PHYs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- .../bindings/reset/lan966x-phy,rst.yaml | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml diff --git a/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml new file mode 100644 index 000000000000..35a32458cafe --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/lan966x-phy,rst.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip Lan966x PHY Reset + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + The Microchip Lan966x Switch provides 2 internal PHY which needs to be + released from reset before they can be accessed. Also it might have external + PHYs which requires to toggle a GPIO before the access to the PHYs. + +properties: + $nodename: + pattern: "^phy-reset@[0-9a-f]+$" + + compatible: + const: microchip,lan966x-phy-reset + + reg: + items: + - description: internal phy reset registers + + reg-names: + const: phy + + "#reset-cells": + const: 1 + + external-phy-reset-gpios: + description: used for release of reset of the external PHY + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - "#reset-cells" + +additionalProperties: false + +examples: + - | + phy_reset: phy-reset@e2010010 { + compatible = "microchip,lan966x-phy-reset"; + reg = <0xe2010010 0x14>; + reg-names = "phy"; + #reset-cells = <1>; + }; -- 2.33.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings 2021-10-19 11:52 ` [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings Horatiu Vultur @ 2021-10-27 3:13 ` Rob Herring 2021-10-29 12:58 ` Horatiu Vultur 0 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2021-10-27 3:13 UTC (permalink / raw) To: Horatiu Vultur; +Cc: p.zabel, devicetree, linux-kernel On Tue, Oct 19, 2021 at 01:52:04PM +0200, Horatiu Vultur wrote: > Document the lan966x phy reset device driving bindings. > It is using register access for the internal PHYs and toggles > GPIO for external PHYs. > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > --- > .../bindings/reset/lan966x-phy,rst.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > diff --git a/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > new file mode 100644 > index 000000000000..35a32458cafe > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > @@ -0,0 +1,53 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/reset/lan966x-phy,rst.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Microchip Lan966x PHY Reset > + > +maintainers: > + - Horatiu Vultur <horatiu.vultur@microchip.com> > + > +description: | > + The Microchip Lan966x Switch provides 2 internal PHY which needs to be > + released from reset before they can be accessed. Also it might have external > + PHYs which requires to toggle a GPIO before the access to the PHYs. > + > +properties: > + $nodename: > + pattern: "^phy-reset@[0-9a-f]+$" ^reset-controller@[0-9a-f]+$ > + > + compatible: > + const: microchip,lan966x-phy-reset > + > + reg: > + items: > + - description: internal phy reset registers Just: maxItems: 1 > + > + reg-names: > + const: phy Not all that useful with only 1 entry. > + > + "#reset-cells": > + const: 1 > + > + external-phy-reset-gpios: > + description: used for release of reset of the external PHY > + maxItems: 1 This belongs in the external PHY's node. > + > +required: > + - compatible > + - reg > + - reg-names > + - "#reset-cells" > + > +additionalProperties: false > + > +examples: > + - | > + phy_reset: phy-reset@e2010010 { > + compatible = "microchip,lan966x-phy-reset"; > + reg = <0xe2010010 0x14>; > + reg-names = "phy"; > + #reset-cells = <1>; > + }; > -- > 2.33.0 > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings 2021-10-27 3:13 ` Rob Herring @ 2021-10-29 12:58 ` Horatiu Vultur 2022-03-13 16:00 ` Michael Walle 0 siblings, 1 reply; 6+ messages in thread From: Horatiu Vultur @ 2021-10-29 12:58 UTC (permalink / raw) To: Rob Herring; +Cc: p.zabel, devicetree, linux-kernel The 10/26/2021 22:13, Rob Herring wrote: Hi Rob, > > On Tue, Oct 19, 2021 at 01:52:04PM +0200, Horatiu Vultur wrote: > > Document the lan966x phy reset device driving bindings. > > It is using register access for the internal PHYs and toggles > > GPIO for external PHYs. > > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > > --- > > .../bindings/reset/lan966x-phy,rst.yaml | 53 +++++++++++++++++++ > > 1 file changed, 53 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > > > diff --git a/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > new file mode 100644 > > index 000000000000..35a32458cafe > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > @@ -0,0 +1,53 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/reset/lan966x-phy,rst.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Microchip Lan966x PHY Reset > > + > > +maintainers: > > + - Horatiu Vultur <horatiu.vultur@microchip.com> > > + > > +description: | > > + The Microchip Lan966x Switch provides 2 internal PHY which needs to be > > + released from reset before they can be accessed. Also it might have external > > + PHYs which requires to toggle a GPIO before the access to the PHYs. > > + > > +properties: > > + $nodename: > > + pattern: "^phy-reset@[0-9a-f]+$" > > ^reset-controller@[0-9a-f]+$ I will update this > > > + > > + compatible: > > + const: microchip,lan966x-phy-reset > > + > > + reg: > > + items: > > + - description: internal phy reset registers > > Just: maxItems: 1 Same here > > > + > > + reg-names: > > + const: phy > > Not all that useful with only 1 entry. And here > > > + > > + "#reset-cells": > > + const: 1 > > + > > + external-phy-reset-gpios: > > + description: used for release of reset of the external PHY > > + maxItems: 1 > > This belongs in the external PHY's node. My problem is if I put this in the external PHY's node, once the switch gets reset it would reset also the GPIO pin and then it can't connect to the external PHYs anymore. The switch will need anyway to call this driver to release the reset of the internal PHYs, so I was thinking to put also the release of the external PHYs in the same driver. Initially we wanted to extend the 'sparx5-switch-reset' driver to do this but the output of that discussion was to have 2 different drivers, one for the switch and one for the PHYs. > > > + > > +required: > > + - compatible > > + - reg > > + - reg-names > > + - "#reset-cells" > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + phy_reset: phy-reset@e2010010 { > > + compatible = "microchip,lan966x-phy-reset"; > > + reg = <0xe2010010 0x14>; > > + reg-names = "phy"; > > + #reset-cells = <1>; > > + }; > > -- > > 2.33.0 > > > > -- /Horatiu ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings 2021-10-29 12:58 ` Horatiu Vultur @ 2022-03-13 16:00 ` Michael Walle 0 siblings, 0 replies; 6+ messages in thread From: Michael Walle @ 2022-03-13 16:00 UTC (permalink / raw) To: horatiu.vultur; +Cc: devicetree, linux-kernel, p.zabel, robh, Michael Walle Hi Horatiu, > > On Tue, Oct 19, 2021 at 01:52:04PM +0200, Horatiu Vultur wrote: > > > Document the lan966x phy reset device driving bindings. > > > It is using register access for the internal PHYs and toggles > > > GPIO for external PHYs. > > > > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > > > --- > > > .../bindings/reset/lan966x-phy,rst.yaml | 53 +++++++++++++++++++ > > > 1 file changed, 53 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > > new file mode 100644 > > > index 000000000000..35a32458cafe > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/reset/lan966x-phy,rst.yaml > > > @@ -0,0 +1,53 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: "http://devicetree.org/schemas/reset/lan966x-phy,rst.yaml#" > > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > > + > > > +title: Microchip Lan966x PHY Reset > > > + > > > +maintainers: > > > + - Horatiu Vultur <horatiu.vultur@microchip.com> > > > + > > > +description: | > > > + The Microchip Lan966x Switch provides 2 internal PHY which needs to be > > > + released from reset before they can be accessed. Also it might have external > > > + PHYs which requires to toggle a GPIO before the access to the PHYs. I don't think this driver is needed at all. See more below. > > > + external-phy-reset-gpios: > > > + description: used for release of reset of the external PHY > > > + maxItems: 1 > > > > This belongs in the external PHY's node. > > My problem is if I put this in the external PHY's node, once the switch > gets reset it would reset also the GPIO pin and then it can't connect > to the external PHYs anymore. But this will only solve your use case. If there is anything else connected on the GPIO it will be reset, too. So you'd loose GPIO state and you just 'fix' the exernal PHY reset lines here. Fortunately, this is already solved by the shared reset lines. See [1] for my proposal. Once the GPIO controller isn't reset anymore, we can describe the reset line to the external PHYs by using the "reset-gpios" property of the MDIO controller. > The switch will need anyway to call this driver to release the reset of > the internal PHYs, so I was thinking to put also the release of the > external PHYs in the same driver. There is already support for this in the MDIO driver, see [2]. This is already used on the Ocelot series. > Initially we wanted to extend the 'sparx5-switch-reset' driver to do > this but the output of that discussion was to have 2 different drivers, > one for the switch and one for the PHYs. -michael [1] https://lore.kernel.org/linux-devicetree/20220313154640.63813-1-michael@walle.cc/ [2] https://lore.kernel.org/netdev/20220313002153.11280-1-michael@walle.cc/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] reset: lan966x: Add support for the phy reset on lan966x 2021-10-19 11:52 [PATCH 0/2] reset: lan996x: Add reset driver for lan966x phys Horatiu Vultur 2021-10-19 11:52 ` [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings Horatiu Vultur @ 2021-10-19 11:52 ` Horatiu Vultur 1 sibling, 0 replies; 6+ messages in thread From: Horatiu Vultur @ 2021-10-19 11:52 UTC (permalink / raw) To: p.zabel, robh+dt; +Cc: devicetree, linux-kernel, Horatiu Vultur This patch adds a driver to release the reset of the PHYs on lan966x. There are 2 mdio buses on lan966x. One which is internal and has 2 PHYs and one is external. On the internal one it is required to release the HW reset of the phys by writing specific register and while on the external one is required to toggle a GPIO pin. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- drivers/reset/Kconfig | 8 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-microchip-lan966x-phy.c | 93 +++++++++++++++++++++ 3 files changed, 102 insertions(+) create mode 100644 drivers/reset/reset-microchip-lan966x-phy.c diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 36ce6c8bcf1e..94e1c0e7d343 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -122,6 +122,14 @@ config RESET_MCHP_SPARX5 help This driver supports switch core reset for the Microchip Sparx5 SoC. +config RESET_MCHP_LAN966X_PHY + bool "Microchip lan966x phy reset driver" + depends on SOC_LAN966 || COMPILE_TEST + select MFD_SYSCON + help + This driver supports the release of phy reset for the + Microchip lan966x SoC. + config RESET_MESON tristate "Meson Reset Driver" depends on ARCH_MESON || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 21d46d8869ff..2d7699aafb6c 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_RESET_K210) += reset-k210.o obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o +obj-$(CONFIG_RESET_MCHP_LAN966X_PHY) += reset-microchip-lan966x-phy.o obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o obj-$(CONFIG_RESET_NPCM) += reset-npcm.o diff --git a/drivers/reset/reset-microchip-lan966x-phy.c b/drivers/reset/reset-microchip-lan966x-phy.c new file mode 100644 index 000000000000..63dd6a7bc62f --- /dev/null +++ b/drivers/reset/reset-microchip-lan966x-phy.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <linux/gpio/consumer.h> +#include <linux/of_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> + +#define CUPHY_REG_OFF 0x10 +#define CUPHY_REG_BIT 0 + +struct lan966x_phy_reset_context { + void __iomem *internal_phy_ctrl; + struct gpio_desc *external_phy_ctrl; + struct reset_controller_dev rcdev; +}; + +static int lan966x_phy_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct lan966x_phy_reset_context *ctx = + container_of(rcdev, struct lan966x_phy_reset_context, rcdev); + u32 val; + + /* In case there are external PHYs toggle the GPIO to release the reset + * of the PHYs + */ + if (ctx->external_phy_ctrl) { + gpiod_direction_output(ctx->external_phy_ctrl, 1); + gpiod_set_value(ctx->external_phy_ctrl, 0); + gpiod_set_value(ctx->external_phy_ctrl, 1); + gpiod_set_value(ctx->external_phy_ctrl, 0); + } + + /* Release the reset of internal PHY */ + val = readl(ctx->internal_phy_ctrl + CUPHY_REG_OFF); + val |= BIT(CUPHY_REG_BIT); + writel(val, ctx->internal_phy_ctrl + CUPHY_REG_OFF); + + return 0; +} + +static const struct reset_control_ops lan966x_phy_reset_ops = { + .reset = lan966x_phy_reset, +}; + +static int lan966x_phy_reset_probe(struct platform_device *pdev) +{ + struct device_node *dn = pdev->dev.of_node; + struct lan966x_phy_reset_context *ctx; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->internal_phy_ctrl = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(ctx->internal_phy_ctrl)) + return dev_err_probe(&pdev->dev, PTR_ERR(ctx->internal_phy_ctrl), + "Could not get resource 0\n"); + + ctx->external_phy_ctrl = devm_gpiod_get_optional(&pdev->dev, + "external-phy-reset", + GPIOD_OUT_LOW); + if (IS_ERR(ctx->external_phy_ctrl)) + return dev_err_probe(&pdev->dev, PTR_ERR(ctx->external_phy_ctrl), + "Could not get reset GPIO\n"); + + ctx->rcdev.owner = THIS_MODULE; + ctx->rcdev.nr_resets = 1; + ctx->rcdev.ops = &lan966x_phy_reset_ops; + ctx->rcdev.of_node = dn; + + return devm_reset_controller_register(&pdev->dev, &ctx->rcdev); +} + +static const struct of_device_id lan966x_phy_reset_of_match[] = { + { .compatible = "microchip,lan966x-phy-reset", }, + { } +}; + +static struct platform_driver lan966x_phy_reset_driver = { + .probe = lan966x_phy_reset_probe, + .driver = { + .name = "lan966x-phy-reset", + .of_match_table = lan966x_phy_reset_of_match, + }, +}; + +static int __init lan966x_phy_reset_init(void) +{ + return platform_driver_register(&lan966x_phy_reset_driver); +} +postcore_initcall(lan966x_phy_reset_init); -- 2.33.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-03-13 16:01 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-10-19 11:52 [PATCH 0/2] reset: lan996x: Add reset driver for lan966x phys Horatiu Vultur 2021-10-19 11:52 ` [PATCH 1/2] dt-bindings: reset: lan966x phy reset driver bindings Horatiu Vultur 2021-10-27 3:13 ` Rob Herring 2021-10-29 12:58 ` Horatiu Vultur 2022-03-13 16:00 ` Michael Walle 2021-10-19 11:52 ` [PATCH 2/2] reset: lan966x: Add support for the phy reset on lan966x Horatiu Vultur
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.