* two imx8m patches for 5.10.y
@ 2021-12-16 13:11 Rasmus Villemoes
2021-12-17 13:42 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Rasmus Villemoes @ 2021-12-16 13:11 UTC (permalink / raw)
To: stable; +Cc: Fabio Estevam, Joakim Zhang
Hi Greg
Please include commits
70eacf42a93a - arm64: dts: imx8m: correct assigned clocks for FEC
798a1807ab13 - arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
in the 5.10.y -stable branch. They fix ethernet on the imx8mp-evk board
(the first is relevant for all imx8m boards, but I've only tested on
imx8mp-evk).
One also needs to have the realtek_phy driver available during early
boot (so either built in or as module in initramfs). Upstream has
6937d8c71f69 - arm64: configs: Select REALTEK_PHY as built-in
but I'm not sure if such a defconfig change (which affects every arm64
board, as opposed to the much more localized .dts changes) is applicable
in -stable. We maintain our own .config anyway, so I don't need
6937d8c71f69 in 5.10-stable.
Thanks,
Rasmus
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: two imx8m patches for 5.10.y
2021-12-16 13:11 two imx8m patches for 5.10.y Rasmus Villemoes
@ 2021-12-17 13:42 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2021-12-17 13:42 UTC (permalink / raw)
To: Rasmus Villemoes; +Cc: stable, Fabio Estevam, Joakim Zhang
On Thu, Dec 16, 2021 at 02:11:36PM +0100, Rasmus Villemoes wrote:
> Hi Greg
>
> Please include commits
>
> 70eacf42a93a - arm64: dts: imx8m: correct assigned clocks for FEC
> 798a1807ab13 - arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
>
> in the 5.10.y -stable branch. They fix ethernet on the imx8mp-evk board
> (the first is relevant for all imx8m boards, but I've only tested on
> imx8mp-evk).
I'll take these now.
> One also needs to have the realtek_phy driver available during early
> boot (so either built in or as module in initramfs). Upstream has
>
> 6937d8c71f69 - arm64: configs: Select REALTEK_PHY as built-in
>
> but I'm not sure if such a defconfig change (which affects every arm64
> board, as opposed to the much more localized .dts changes) is applicable
> in -stable. We maintain our own .config anyway, so I don't need
> 6937d8c71f69 in 5.10-stable.
The defconfig change I'll leave alone.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-17 13:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-16 13:11 two imx8m patches for 5.10.y Rasmus Villemoes
2021-12-17 13:42 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.