[PATCH v2 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

[PATCH v2 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

[Xin Ji]

Add analogix PD chip anx7411 device binding

Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
 .../bindings/usb/analogix,anx7411.yaml        | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml

diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
new file mode 100644
index 000000000000..c5c6d5a9dc17
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/analogix,anx7411.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analogix ANX7411 Type-C controller bindings
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7411
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+
+    allOf:
+      - $ref: ../connector/usb-connector.yaml
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      data-role: true
+
+      try-power-role: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec: anx7411@2C {
+            compatible = "analogix,anx7411";
+            reg = <0x2C>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                try-power-role = "source";
+
+                port {
+                    typec_con_ep: endpoint {
+                        remote-endpoint = <&usbotg_hs_ep>;
+                    };
+                };
+            };
+        };
+    };
+...
-- 
2.25.1

[PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Xin Ji]

Add driver for analogix ANX7411 USB Type-C DRP port controller.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
 drivers/usb/typec/Kconfig   |   11 +
 drivers/usb/typec/Makefile  |    1 +
 drivers/usb/typec/anx7411.c | 1473 +++++++++++++++++++++++++++++++++++
 drivers/usb/typec/anx7411.h |  271 +++++++
 4 files changed, 1756 insertions(+)
 create mode 100644 drivers/usb/typec/anx7411.c
 create mode 100644 drivers/usb/typec/anx7411.h

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index ab480f38523a..615183f46405 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"
 
 source "drivers/usb/typec/tipd/Kconfig"
 
+config TYPEC_ANX7411
+	tristate "Analogix ANX7411 Type-C DRP Port controller driver"
+	depends on I2C
+	depends on USB_ROLE_SWITCH
+	help
+	  Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
+	  controller driver.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called anx7411.ko.
+
 config TYPEC_HD3SS3220
 	tristate "TI HD3SS3220 Type-C DRP Port controller driver"
 	depends on I2C
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index a0adb8947a30..f4e7188f174a 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_TYPEC)		+= altmodes/
 obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
 obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
 obj-$(CONFIG_TYPEC_TPS6598X)	+= tipd/
+obj-$(CONFIG_TYPEC_ANX7411)	+= anx7411.o
 obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
 obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
 obj-$(CONFIG_TYPEC_STUSB160X) 	+= stusb160x.o
diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
new file mode 100644
index 000000000000..e25417a89cdb
--- /dev/null
+++ b/drivers/usb/typec/anx7411.c
@@ -0,0 +1,1473 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
+ *
+ */
+#include <linux/gcd.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_gpio.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#include "anx7411.h"
+
+#define DEBUG
+
+static u8 snk_identity[] = {
+	VENDOR_ID & 0xFF, (VENDOR_ID >> 8) & 0xFF, 0x00, 0x82,  /* snk_id_hdr */
+	0x00, 0x00, 0x00, 0x00,                                 /* snk_cert */
+	0x00, 0x00, PRODUCT_ID & 0xFF, (PRODUCT_ID >> 8) & 0xFF,/* 5snk_ama */
+};
+
+static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
+
+static int anx7411_reg_read(struct i2c_client *client,
+			    u8 reg_addr)
+{
+	return i2c_smbus_read_byte_data(client, reg_addr);
+}
+
+static int anx7411_reg_block_read(struct i2c_client *client,
+				  u8 reg_addr, u8 len, u8 *buf)
+{
+	return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static int anx7411_reg_write(struct i2c_client *client,
+			     u8 reg_addr, u8 reg_val)
+{
+	return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
+}
+
+static int anx7411_reg_block_write(struct i2c_client *client,
+				   u8 reg_addr, u8 len, u8 *buf)
+{
+	return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static struct anx7411_i2c_select anx7411_i2c_addr[] = {
+	{TCPC_ADDRESS1, SPI_ADDRESS1},
+	{TCPC_ADDRESS2, SPI_ADDRESS2},
+	{TCPC_ADDRESS3, SPI_ADDRESS3},
+	{TCPC_ADDRESS4, SPI_ADDRESS4},
+};
+
+static int anx7411_detect_power_mode(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int ret;
+	int mode;
+
+	ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+	if (ret < 0) {
+		dev_info(dev, "failed to read request current.\n");
+		return ret;
+	}
+	ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
+
+	ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+	if (ret < 0) {
+		dev_info(dev, "failed to read voltage.\n");
+		return ret;
+	}
+	ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
+
+	if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
+		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		power_supply_changed(ctx->psy);
+	}
+
+	if (!ctx->typec.cc_orientation_valid) {
+		dev_info(dev, "cc orientation is 0(debug cable plug in).\n");
+		return 0;
+	}
+
+	if (ctx->typec.cc_connect == CC1_CONNECTED)
+		mode = CC1_RP(ctx->typec.cc_status);
+	else
+		mode = CC2_RP(ctx->typec.cc_status);
+	if (mode) {
+		dev_info(dev, "set power opmode as %d.\n", mode - 1);
+		typec_set_pwr_opmode(ctx->typec.port, mode - 1);
+		return 0;
+	}
+
+	typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
+
+	return 0;
+}
+
+static int anx7411_register_partner(struct anx7411_data *ctx,
+				    int pd, int accessory)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct typec_partner_desc desc;
+
+	if (ctx->typec.partner) {
+		dev_info(dev, "ignore register typec partner request.\n");
+		return 0;
+	}
+
+	dev_info(dev, "register typec partner port.\n");
+
+	desc.usb_pd = pd;
+	desc.accessory = accessory;
+	desc.identity = NULL;
+	ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
+	if (IS_ERR(ctx->typec.partner)) {
+		dev_err(dev, "failed to register partner\n");
+		ctx->typec.partner = NULL;
+		return PTR_ERR(ctx->typec.partner);
+	}
+
+	return 0;
+}
+
+static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
+{
+	int ret;
+	int cc1_rd, cc2_rd;
+	int cc1_ra, cc2_ra;
+	int cc1_rp, cc2_rp;
+	struct device *dev = &ctx->spi_client->dev;
+
+	ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
+	if (ret < 0) {
+		dev_info(dev, "failed to read cc status.\n");
+		return ret;
+	}
+
+	dev_info(dev, "cc status %.02x\n", ret);
+
+	ctx->typec.cc_status = ret;
+
+	cc1_rd = ret & CC1_RD ? 1 : 0;
+	cc2_rd = ret & CC2_RD ? 1 : 0;
+	cc1_ra = ret & CC1_RA ? 1 : 0;
+	cc2_ra = ret & CC2_RA ? 1 : 0;
+	cc1_rp = CC1_RP(ret);
+	cc2_rp = CC2_RP(ret);
+
+	/* Debug cable, nothing to do */
+	if (cc1_rd && cc2_rd) {
+		ctx->typec.cc_orientation_valid = 0;
+		anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
+		return 0;
+	}
+
+	if (cc1_ra && cc2_ra) {
+		ctx->typec.cc_orientation_valid = 0;
+		anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
+		return 0;
+	}
+
+	ctx->typec.cc_orientation_valid = 1;
+
+	anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
+
+	if (cc1_rd || cc1_rp) {
+		dev_info(dev, "set orientation to normal\n");
+		typec_set_orientation(ctx->typec.port,
+				      TYPEC_ORIENTATION_NORMAL);
+		ctx->typec.cc_connect = CC1_CONNECTED;
+	}
+
+	if (cc2_rd || cc2_rp) {
+		dev_info(dev, "set orientation to reverse\n");
+		typec_set_orientation(ctx->typec.port,
+				      TYPEC_ORIENTATION_REVERSE);
+		ctx->typec.cc_connect = CC2_CONNECTED;
+	}
+
+	dev_info(dev, "cc1_rp(%d), cc2_rp(%d)", cc1_rp, cc2_rp);
+	dev_info(dev, "\tcc1_rd(%d), cc2_rd(%d), cc_connected(%d).\n",
+		 cc1_rd, cc2_rd, ctx->typec.cc_connect);
+
+	return 0;
+}
+
+static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
+{
+	int mode = TYPEC_STATE_SAFE;
+	struct device *dev = &ctx->spi_client->dev;
+
+	switch (pin_assignment) {
+	case SELECT_PIN_ASSIGMENT_U:
+		/* default 4 line USB 3.1 */
+		mode = TYPEC_STATE_MODAL;
+		break;
+	case SELECT_PIN_ASSIGMENT_C:
+	case SELECT_PIN_ASSIGMENT_E:
+		/* 4 line DP */
+		mode = TYPEC_STATE_SAFE;
+		break;
+	case SELECT_PIN_ASSIGMENT_D:
+		/* 2 line DP, 2 line USB */
+		mode = TYPEC_MODE_USB3;
+		break;
+	default:
+		mode = TYPEC_STATE_SAFE;
+		break;
+	}
+
+	ctx->typec.pin_assignment = pin_assignment;
+
+	dev_info(dev, "pin assignment %d, mux mode %d.\n",
+		 pin_assignment, mode);
+
+	return typec_set_mode(ctx->typec.port, mode);
+}
+
+static void anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
+{
+	struct device *dev = &ctx->spi_client->dev;
+
+	if (!ctx->typec.role_sw) {
+		dev_info(dev, "no usb role switch");
+		return;
+	}
+
+	usb_role_switch_set_role(ctx->typec.role_sw, role);
+}
+
+static int anx7411_data_role_detect(struct anx7411_data *ctx)
+{
+	int ret;
+	struct device *dev = &ctx->spi_client->dev;
+
+	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+	if (ret < 0) {
+		dev_err(dev, "read system status failed: %d.\n", ret);
+		return ret;
+	}
+
+	ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+	ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
+
+	typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
+	typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
+
+	if (ctx->typec.data_role == TYPEC_HOST)
+		anx7411_set_usb_role(ctx, USB_ROLE_HOST);
+	else
+		anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
+
+	dev_info(dev, "data role change, status(0x%.02x), data role(%d)\n",
+		 ret, ctx->typec.data_role);
+
+	return 0;
+}
+
+static int anx7411_power_role_detect(struct anx7411_data *ctx)
+{
+	int ret;
+	struct device *dev = &ctx->spi_client->dev;
+
+	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+	if (ret < 0) {
+		dev_err(dev, "read system status failed: %d.\n", ret);
+		return ret;
+	}
+
+	ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+
+	if (ctx->typec.power_role == TYPEC_SOURCE) {
+		ctx->typec.request_current = DEF_1_5A;
+		ctx->typec.request_voltage = DEF_5V;
+	}
+
+	dev_info(dev, "power role change, status(0x%.02x), power role(%d).\n",
+		 ret, ctx->typec.power_role);
+	typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
+
+	return 0;
+}
+
+static int anx7411_cc_status_detect(struct anx7411_data *ctx)
+{
+	anx7411_detect_cc_orientation(ctx);
+	anx7411_detect_power_mode(ctx);
+
+	return 0;
+}
+
+static int anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int i;
+
+	dev_info(dev, "unregister typec altmode.\n");
+
+	ctx->typec.dp_altmode_enter = 0;
+	ctx->typec.cust_altmode_enter = 0;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (ctx->typec.amode[i]) {
+			typec_unregister_altmode(ctx->typec.amode[i]);
+			ctx->typec.amode[i] = NULL;
+		}
+
+	ctx->typec.pin_assignment = 0;
+	return 0;
+}
+
+static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
+					  int svid, int vdo)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct typec_altmode_desc desc;
+	int i;
+
+	dev_info(dev, "register typec altmode -> vdo = 0x%x.\n", vdo);
+	desc.svid = svid;
+	desc.vdo = vdo;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (!ctx->typec.amode[i])
+			break;
+
+	desc.mode = i + 1; /* start with 1 */
+
+	if (i >= MAX_ALTMODE) {
+		dev_info(dev, "no altmode space for registering\n");
+		return -ENOMEM;
+	}
+
+	ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
+							     &desc);
+	if (IS_ERR(ctx->typec.amode[i])) {
+		dev_err(dev, "failed to register altmode\n");
+		ctx->typec.amode[i] = NULL;
+		return PTR_ERR(ctx->typec.amode);
+	}
+
+	return 0;
+}
+
+static int anx7411_unregister_partner(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+
+	dev_info(dev, "unregister typec partner port.\n");
+	if (ctx->typec.partner) {
+		typec_unregister_partner(ctx->typec.partner);
+		ctx->typec.partner = NULL;
+	}
+
+	return 0;
+}
+
+static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int i;
+
+	dev_info(dev, "update typec altmode to true.\n");
+
+	if (svid == DP_SVID)
+		ctx->typec.dp_altmode_enter = 1;
+	else
+		ctx->typec.cust_altmode_enter = 1;
+
+	for (i = 0; i < MAX_ALTMODE; i++) {
+		if (!ctx->typec.amode[i])
+			continue;
+
+		if (ctx->typec.amode[i]->svid == svid) {
+			typec_altmode_update_active(ctx->typec.amode[i], true);
+			typec_altmode_notify(ctx->typec.amode[i],
+					     ctx->typec.pin_assignment,
+					     &ctx->typec.data);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int anx7411_register_altmode(struct anx7411_data *ctx,
+				    bool dp_altmode, u8 *buf)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int ret;
+	int svid;
+	int mid;
+
+	if (!ctx->typec.partner) {
+		dev_info(dev, "partner not register yet, ignore altmode(%d)\n",
+			 dp_altmode);
+		return 0;
+	}
+
+	svid = DP_SVID;
+	if (dp_altmode) {
+		dev_info(dev, "register DP altmode\n");
+		mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+
+		return anx7411_typec_register_altmode(ctx, svid, mid);
+	}
+
+	svid = (buf[3] << 8) | buf[2];
+	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) {
+		dev_info(dev, "svid(0x%x) enter mode\n", svid);
+		return anx7411_update_altmode(ctx, svid);
+	}
+
+	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) {
+		dev_info(dev, "ignore VDM message 0x%.02x%.02x\n",
+			 buf[0], buf[1]);
+		return 0;
+	}
+
+	mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
+
+	ret = anx7411_typec_register_altmode(ctx, svid, mid);
+	if (ctx->typec.cust_altmode_enter)
+		ret |= anx7411_update_altmode(ctx, svid);
+
+	return ret;
+}
+
+static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	u8 cur_50ma, vol_100mv;
+
+	dev_info(dev, "received message: type:0x%.02x, len:%d, buf[0]:%d\n",
+		 type, len, buf[0]);
+
+	switch (type) {
+	case TYPE_SRC_CAP:
+		cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+		vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+		dev_info(dev, "get current(%dma), voltage(%dmv), power(%dmw)\n",
+			 cur_50ma * CURRENT_UNIT, vol_100mv * VOLTAGE_UNIT,
+			 cur_50ma * vol_100mv * 5);
+
+		ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
+		ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
+
+#ifndef CUST_SINK_CTRL_EN
+		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		power_supply_changed(ctx->psy);
+#else
+		/* Enable OCM automatically control sink_ctrl pin*/
+		dev_info(dev, "Enable OCM auto control sink_ctrl pin\n");
+		anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
+				  anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) &
+				  ~SINK_CTRL_DIS_FLAG);
+		if (vol_100mv != REQ_VOL_20V_IN_100MV)
+			break;
+
+		if (cur_50ma != REQ_CUR_2_25A_IN_50MA &&
+		    cur_50ma != REQ_CUR_3_25A_IN_50MA)
+			break;
+
+		/* Disable OCM automatically control sink_ctrl pin*/
+		dev_info(dev, "Disable OCM auto control sink_ctrl pin\n");
+		anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
+				  anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) |
+				  SINK_CTRL_DIS_FLAG);
+
+		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		power_supply_changed(ctx->psy);
+#endif
+		break;
+	case TYPE_SNK_CAP:
+		break;
+	case TYPE_SVID:
+		break;
+	case TYPE_SNK_IDENTITY:
+		break;
+	case TYPE_GET_DP_ALT_ENTER:
+		/* DP alt mode enter success */
+		if (buf[0])
+			anx7411_update_altmode(ctx, DP_SVID);
+		break;
+	case TYPE_DP_ALT_ENTER:
+		/* Update DP altmode */
+		anx7411_update_altmode(ctx, DP_SVID);
+		break;
+	case TYPE_OBJ_REQ:
+		anx7411_detect_power_mode(ctx);
+		break;
+	case TYPE_DP_CONFIGURE:
+		anx7411_set_mux(ctx, buf[1]);
+		break;
+	case TYPE_DP_DISCOVER_MODES_INFO:
+		/* Make sure discover modes valid */
+		if (buf[0] | buf[1])
+			/* Register DP Altmode */
+			anx7411_register_altmode(ctx, 1, buf);
+		break;
+	case TYPE_VDM:
+		/* Register other altmode */
+		anx7411_register_altmode(ctx, 0, buf);
+		break;
+	default:
+		dev_info(dev, "ignore message(0x%.02x).\n", type);
+		break;
+	}
+
+	return 0;
+}
+
+static u8 checksum(struct device *dev, u8 *buf, u8 len)
+{
+	u8 ret;
+	u8 i;
+
+	ret = 0;
+	for (i = 0; i < len; i++)
+		ret += buf[i];
+
+	return ret;
+}
+
+static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
+{
+	return anx7411_reg_read(client, CMD_SEND_BUF);
+}
+
+static int anx7411_wait_msg_empty(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int ret, val;
+
+	ret = readx_poll_timeout(anx7411_read_msg_ctrl_status,
+				 client, val, (val < 0) || (val == 0),
+				 2000, 2000 * 150);
+	if (ret)
+		dev_info(dev, "msg buffer busy\n");
+
+	return ret;
+}
+
+static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	u8 msg[MSG_LEN];
+	u8 crc;
+	int ret;
+
+	if (size)
+		memcpy(&msg[MSG_RAWDATA], buf, size);
+	msg[MSG_TYPE] = type;
+	msg[MSG_HEADER] = size + 1;
+
+	crc = checksum(dev, msg, size + HEADER_LEN);
+	msg[size + HEADER_LEN] = 0 - crc;
+
+	ret = anx7411_wait_msg_empty(ctx->spi_client);
+	if (ret) {
+		dev_info(dev, "firmware busy, ret(0x%.02x)\n", ret);
+		return ret;
+	}
+
+	anx7411_reg_block_write(ctx->spi_client,
+				CMD_SEND_BUF + 1, size + HEADER_LEN,
+				&msg[MSG_TYPE]);
+	return anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
+				 msg[MSG_HEADER]);
+}
+
+static int anx7411_process_cmd(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	u8 msg[MSG_LEN];
+	u8 len;
+	u8 crc;
+
+	/* Read message from firmware */
+	anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, MSG_LEN, msg);
+	anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
+
+	if (!msg[MSG_HEADER]) {
+		dev_info(dev, "message empty\n");
+		return 0;
+	}
+
+	len = msg[MSG_HEADER] & MSG_LEN_MASK;
+	crc = checksum(dev, msg, len + HEADER_LEN);
+	if (crc) {
+		dev_err(dev, "message error crc(0x%.02x)\n", crc);
+		return -1;
+	}
+
+	return anx7411_parse_cmd(ctx, msg[MSG_TYPE],
+				 &msg[MSG_RAWDATA], len - 1);
+}
+
+static void anx7411_translate_payload(struct device *dev, u32 *payload,
+				      u32 *pdo, int nr, const char *type)
+{
+	int i;
+
+	dev_info(dev, "convert %s pdos to little endian format\n", type);
+	if (nr > PDO_MAX_OBJECTS) {
+		dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
+			nr, PDO_MAX_OBJECTS);
+
+		return;
+	}
+
+	for (i = 0; i < nr; i++)
+		payload[i] = cpu_to_le32(pdo[i]);
+}
+
+static void anx7411_config(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	struct typec_params *typecp = &ctx->typec;
+	u32 payload[PDO_MAX_OBJECTS];
+
+	dev_info(dev, "initial anx7411\n");
+	/* Config PD FW work under PD 2.0 */
+	anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
+	anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
+			  UNSTRUCT_VDM_EN | DELAY_200MS |
+			  VSAFE1 | FRS_EN);
+	anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
+			  AUTO_PD_EN | FORCE_SEND_RDO);
+
+	/* Set VBUS current threshold */
+	anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
+	anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
+
+	/* Fix dongle compatible issue */
+	anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
+			  anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
+			  DONGLE_IOP);
+	anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
+
+	anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
+
+	if (typecp->caps_flags & HAS_SOURCE_CAP) {
+		anx7411_translate_payload(dev, payload, typecp->src_pdo,
+					  typecp->src_pdo_nr, "source");
+		anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
+				 typecp->src_pdo_nr * 4);
+		anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
+				 sizeof(snk_identity));
+		anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
+				 sizeof(dp_caps));
+	}
+
+	if (typecp->caps_flags & HAS_SINK_CAP) {
+		anx7411_translate_payload(dev, payload, typecp->sink_pdo,
+					  typecp->sink_pdo_nr, "sink");
+		anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
+				 typecp->sink_pdo_nr * 4);
+	}
+
+	if (typecp->caps_flags & HAS_SINK_WATT) {
+		if (typecp->sink_watt) {
+			anx7411_reg_write(ctx->spi_client, MAX_POWER,
+					  typecp->sink_watt);
+			/* Set min power to 1W */
+			anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
+		}
+
+		if (typecp->sink_voltage)
+			anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
+					  typecp->sink_voltage);
+	}
+
+	if (!typecp->caps_flags)
+		usleep_range(5000, 6000);
+
+	ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
+	ctx->fw_subversion = anx7411_reg_read(ctx->spi_client,
+					      FW_SUBVER);
+	dev_info(dev, "power on, ocm version %.02x%.02x\n",
+		 ctx->fw_version, ctx->fw_subversion);
+}
+
+static void anx7411_chip_standby(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->tcpc_client->dev;
+
+	dev_info(dev, "Anx7411 enter into standby mode.\n");
+
+	anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
+			  anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
+			  OCM_RESET);
+	anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
+	/* Set TCPC to RD and DRP enable */
+	anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CONTROL, 0x4A);
+	/* Send DRP toggle command */
+	anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0x99);
+
+	/* Send TCPC enter standby command */
+	anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0xFF);
+}
+
+static void anx7411_work_func(struct work_struct *work)
+{
+	int ret;
+	u8 buf[STATUS_LEN];
+	u8 int_change, int_status, alert0, alert1;
+	struct anx7411_data *ctx = container_of(work,
+						struct anx7411_data, work);
+	struct device *dev = &ctx->spi_client->dev;
+
+	mutex_lock(&ctx->lock);
+
+	/* Read interrupt change status */
+	ret = anx7411_reg_block_read(ctx->spi_client, INT_STS,
+				     STATUS_LEN, buf);
+	if (ret < 0) {
+		/* Power standby mode, just return */
+		goto unlock;
+	}
+	int_change = buf[0];
+	int_status = buf[1];
+
+	/* Read alert register */
+	ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0,
+				     STATUS_LEN, buf);
+	if (ret < 0) {
+		dev_err(dev, "failed to read register(%d)\n", ALERT_0);
+		goto unlock;
+	}
+	alert0 = buf[0];
+	alert1 = buf[1];
+
+	/* Clear interrupt and alert status */
+	anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+	anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
+	anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
+
+	dev_info(dev, "int_change(0x%.02x), int_status(0x%.02x).\n",
+		 int_change, int_status);
+	dev_info(dev, "alert0(0x%.02x), alert1(0x%.02x).\n", alert0, alert1);
+
+	if (alert1 & INTP_POW_OFF) {
+		anx7411_partner_unregister_altmode(ctx);
+		anx7411_set_usb_role(ctx, USB_ROLE_NONE);
+		anx7411_unregister_partner(ctx);
+		ctx->psy_online = ANX7411_PSY_OFFLINE;
+		ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+		ctx->typec.request_voltage = 0;
+		ctx->typec.request_current = 0;
+		power_supply_changed(ctx->psy);
+		anx7411_chip_standby(ctx);
+		goto unlock;
+	}
+
+	if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
+		anx7411_config(ctx);
+		anx7411_data_role_detect(ctx);
+		anx7411_power_role_detect(ctx);
+		anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+	}
+
+	if (alert0 & RECEIVED_MSG)
+		anx7411_process_cmd(ctx);
+
+	ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+	if (ctx->typec.data_role != ret)
+		anx7411_data_role_detect(ctx);
+
+	ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+	if (ctx->typec.power_role != ret)
+		anx7411_power_role_detect(ctx);
+
+	if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
+		anx7411_cc_status_detect(ctx);
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static irqreturn_t anx7411_intr_isr(int irq, void *data)
+{
+	struct anx7411_data *ctx = (struct anx7411_data *)data;
+
+	queue_work(ctx->workqueue, &ctx->work);
+
+	return IRQ_HANDLED;
+}
+
+static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
+					      struct i2c_client *client)
+{
+	int i;
+	u8 spi_addr;
+
+	for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
+		if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
+			spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
+			ctx->spi_client = i2c_new_dummy_device(client->adapter,
+							       spi_addr);
+			if (ctx->spi_client) {
+				dev_info(&client->dev, "found spi slave\n");
+				return 0;
+			}
+		}
+	}
+
+	dev_err(&client->dev, "unable to get SPI slave\n");
+	return -ENOMEM;
+}
+
+static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
+{
+	int i;
+
+	for (i = 0; i < MAX_ALTMODE; i++)
+		if (adev[i]) {
+			typec_unregister_altmode(adev[i]);
+			adev[i] = NULL;
+		}
+}
+
+static int anx7411_usb_mux_set(struct typec_mux *mux,
+			       struct typec_mux_state *state)
+{
+	struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
+	struct device *dev = &ctx->spi_client->dev;
+	int has_dp;
+
+	has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
+		  state->alt->mode == USB_TYPEC_DP_MODE);
+	dev_info(dev, "callback: mux set: %d", has_dp);
+	if (!has_dp) {
+		dev_info(dev, "dp altmode not register\n");
+		return 0;
+	}
+
+	return 0;
+}
+
+static int anx7411_usb_set_orientation(struct typec_switch *sw,
+				       enum typec_orientation orientation)
+{
+	struct anx7411_data *ctx = typec_switch_get_drvdata(sw);
+	struct device *dev = &ctx->spi_client->dev;
+
+	dev_info(dev, "callback: orientation set %d\n", orientation);
+
+	return 0;
+}
+
+static int anx7411_register_switch(struct anx7411_data *ctx,
+				   struct device *dev,
+				   struct fwnode_handle *fwnode)
+{
+	struct typec_switch_desc sw_desc = { };
+
+	sw_desc.fwnode = fwnode;
+	sw_desc.drvdata = ctx;
+	sw_desc.name = fwnode_get_name(fwnode);
+	sw_desc.set = anx7411_usb_set_orientation;
+
+	ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(ctx->typec.typec_switch)) {
+		dev_err(dev, "switch register failed\n");
+		return PTR_ERR(ctx->typec.typec_switch);
+	}
+
+	return 0;
+}
+
+static int anx7411_register_mux(struct anx7411_data *ctx,
+				struct device *dev,
+				struct fwnode_handle *fwnode)
+{
+	struct typec_mux_desc mux_desc = { };
+
+	mux_desc.fwnode = fwnode;
+	mux_desc.drvdata = ctx;
+	mux_desc.name = fwnode_get_name(fwnode);
+	mux_desc.set = anx7411_usb_mux_set;
+
+	ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(ctx->typec.typec_mux)) {
+		dev_err(dev, "mux register failed\n");
+		return PTR_ERR(ctx->typec.typec_mux);
+	}
+
+	return 0;
+}
+
+static void anx7411_unregister_mux(struct anx7411_data *ctx)
+{
+	if (ctx->typec.typec_mux) {
+		typec_mux_unregister(ctx->typec.typec_mux);
+		ctx->typec.typec_mux = NULL;
+	}
+}
+
+static void anx7411_unregister_switch(struct anx7411_data *ctx)
+{
+	if (ctx->typec.typec_switch) {
+		typec_switch_unregister(ctx->typec.typec_switch);
+		ctx->typec.typec_switch = NULL;
+	}
+}
+
+static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
+				      struct device *dev)
+{
+	int ret;
+	struct device_node *node;
+
+	node = of_find_node_by_name(dev->of_node, "orientation_switch");
+	if (!node) {
+		dev_info(dev, "no typec switch exist\n");
+		return 0;
+	}
+
+	dev_info(dev, "register switch\n");
+	ret = anx7411_register_switch(ctx, dev, &node->fwnode);
+	if (ret) {
+		dev_err(dev, "failed register switch");
+		return ret;
+	}
+
+	node = of_find_node_by_name(dev->of_node, "mode_switch");
+	if (!node) {
+		dev_err(dev, "no typec mux exist");
+		ret = -ENODEV;
+		goto unregister_switch;
+	}
+
+	dev_info(dev, "register mode switch\n");
+	ret = anx7411_register_mux(ctx, dev, &node->fwnode);
+	if (ret) {
+		dev_err(dev, "failed register mode switch");
+		ret = -ENODEV;
+		goto unregister_switch;
+	}
+
+	return 0;
+
+unregister_switch:
+	anx7411_unregister_switch(ctx);
+
+	return ret;
+}
+
+static int anx7411_typec_port_probe(struct anx7411_data *ctx,
+				    struct device *dev)
+{
+	struct typec_capability *cap = &ctx->typec.caps;
+	struct typec_params *typecp = &ctx->typec;
+	struct fwnode_handle *fwnode;
+	const char *buf;
+	int ret, i;
+
+	fwnode = device_get_named_child_node(dev, "connector");
+	if (!fwnode)
+		return -EINVAL;
+
+	ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+	if (ret) {
+		dev_err(dev, "power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->type = ret;
+
+	ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+	if (ret) {
+		dev_err(dev, "data-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_port_data_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->data = ret;
+
+	ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
+	if (ret) {
+		dev_err(dev, "try-power-role not found: %d\n", ret);
+		return ret;
+	}
+
+	ret = typec_find_power_role(buf);
+	if (ret < 0)
+		return ret;
+	cap->prefer_role = ret;
+
+	/* Get source pdos */
+	ret = fwnode_property_count_u32(fwnode, "source-pdos");
+	if (ret > 0) {
+		dev_info(dev, "%d source-pdos found\n", ret);
+		typecp->src_pdo_nr = min(ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+						     typecp->src_pdo,
+						     typecp->src_pdo_nr);
+		if (ret < 0) {
+			dev_err(dev, "source cap validate failed: %d\n", ret);
+			return -EINVAL;
+		}
+
+		typecp->caps_flags |= HAS_SOURCE_CAP;
+	}
+
+	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
+	if (ret > 0) {
+		dev_info(dev, "%d sink-pdos found\n", ret);
+		typecp->sink_pdo_nr = min(ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+						     typecp->sink_pdo,
+						     typecp->sink_pdo_nr);
+		if (ret < 0) {
+			dev_err(dev, "sink cap validate failed: %d\n", ret);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < typecp->sink_pdo_nr; i++) {
+			ret = 0;
+			switch (pdo_type(typecp->sink_pdo[i])) {
+			case PDO_TYPE_FIXED:
+				ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
+				break;
+			case PDO_TYPE_BATT:
+			case PDO_TYPE_VAR:
+				ret = pdo_max_voltage(typecp->sink_pdo[i]);
+				break;
+			case PDO_TYPE_APDO:
+			default:
+				ret = 0;
+				break;
+			}
+
+			/* 100mv per unit */
+			typecp->sink_voltage = max(5000, ret) / 100;
+		}
+
+		typecp->caps_flags |= HAS_SINK_CAP;
+	}
+
+	if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
+		dev_info(dev, "%d sink-microwat found\n", ret);
+		typecp->sink_watt = ret / 500000; /* 500mw per unit */
+		typecp->caps_flags |= HAS_SINK_WATT;
+	}
+
+	cap->fwnode = fwnode;
+
+	ctx->typec.role_sw = usb_role_switch_get(dev);
+	if (IS_ERR(ctx->typec.role_sw)) {
+		dev_err(dev, "USB role switch not found.\n");
+		ctx->typec.role_sw = NULL;
+	}
+
+	ctx->typec.port = typec_register_port(dev, cap);
+	if (IS_ERR(ctx->typec.port)) {
+		ret = PTR_ERR(ctx->typec.port);
+		ctx->typec.port = NULL;
+		dev_err(dev, "Failed to register type c port %d\n", ret);
+		return ret;
+	}
+
+	typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
+				     ctx->typec.port_amode,
+				     MAX_ALTMODE);
+
+	return 0;
+}
+
+static int anx7411_typec_check_connection(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->spi_client->dev;
+	int ret;
+
+	ret = anx7411_reg_read(ctx->spi_client, FW_VER);
+	if (ret < 0) {
+		/* No device attached in typec port */
+		dev_info(dev, "no connection detect.\n");
+		return 0;
+	}
+
+	dev_info(dev, "detected typec connected, ocm ver:0x%.02x.\n", ret);
+	dev_info(dev, "force clear interrupt and alert.\n");
+	/* Clear interrupt and alert status */
+	anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+	anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
+	anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
+
+	anx7411_cc_status_detect(ctx);
+
+	anx7411_power_role_detect(ctx);
+
+	dev_info(dev, "PD %s voltage(%d), current(%d).\n",
+		 ctx->typec.power_role == TYPEC_SOURCE ? "supply" : "request",
+		 ctx->typec.request_voltage, ctx->typec.request_current);
+
+	anx7411_data_role_detect(ctx);
+
+	anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+
+	anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
+
+	anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
+
+	return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
+{
+	struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+
+	anx7411_partner_unregister_altmode(ctx);
+
+	if (ctx->typec.partner)
+		anx7411_unregister_partner(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
+{
+	struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+	/* Detect PD connection */
+	anx7411_typec_check_connection(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static const struct dev_pm_ops anx7411_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
+			   anx7411_runtime_pm_resume, NULL)
+};
+
+static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
+{
+	struct device *dev = &ctx->tcpc_client->dev;
+
+	ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
+	if (!ctx->intp_gpiod) {
+		dev_info(dev, "no interrupt gpio property\n");
+		return;
+	}
+
+	ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
+	dev_info(dev, "request gpio(%d) irq(%d)\n",
+		 desc_to_gpio(ctx->intp_gpiod), ctx->intp_irq);
+
+	if (!ctx->intp_irq)
+		dev_err(dev, "failed to get GPIO IRQ\n");
+}
+
+static const char *anx7411_psy_name_prefix = "anx7411-source-psy-";
+
+static enum power_supply_usb_type anx7411_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+static enum power_supply_property anx7411_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int anx7411_psy_set_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	if (psp == POWER_SUPPLY_PROP_ONLINE) {
+		pr_info("[DEBUG] set prop -> %d\n", val->intval);
+		ctx->psy_online = val->intval;
+#ifdef CUST_SINK_CTRL_EN
+		if (ctx->psy_online == ANX7411_PSY_HANG)
+			anx7411_reg_write(ctx->tcpc_client,
+					  TCPC_COMMAND,
+					  SINK_CTRL_DIS);
+		else if (ctx->psy_online)
+			anx7411_reg_write(ctx->tcpc_client,
+					  TCPC_COMMAND,
+					  SINK_CTRL_EN);
+#endif
+	} else {
+		ret = -EINVAL;
+	}
+
+	power_supply_changed(ctx->psy);
+	return ret;
+}
+
+static int anx7411_psy_prop_writeable(struct power_supply *psy,
+				      enum power_supply_property psp)
+{
+	return (psp == POWER_SUPPLY_PROP_ONLINE) ? 1 : 0;
+}
+
+static int anx7411_psy_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = ctx->usb_type;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ctx->psy_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		val->intval = (ctx->psy_online) ?
+			ctx->typec.request_voltage * 1000 : 0;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = (ctx->psy_online) ?
+			ctx->typec.request_current * 1000 : 0;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int anx7411_psy_register(struct anx7411_data *ctx)
+{
+	struct power_supply_config psy_cfg = {};
+	const char *port_dev_name = dev_name(ctx->dev);
+	size_t psy_name_len = strlen(anx7411_psy_name_prefix) +
+				     strlen(port_dev_name) + 1;
+	char *psy_name;
+	struct power_supply_desc *psy_desc = &ctx->psy_desc;
+
+	psy_cfg.drv_data = ctx;
+	psy_cfg.fwnode = dev_fwnode(ctx->dev);
+	psy_name = devm_kzalloc(ctx->dev, psy_name_len, GFP_KERNEL);
+	if (!psy_name) {
+		dev_warn(ctx->dev, "unable to alloc psy memory\n");
+		return -ENOMEM;
+	}
+
+	snprintf(psy_name, psy_name_len, "%s%s", anx7411_psy_name_prefix,
+		 port_dev_name);
+
+	psy_desc->name = psy_name;
+	psy_desc->type = POWER_SUPPLY_TYPE_USB;
+	psy_desc->usb_types = anx7411_psy_usb_types;
+	psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
+	psy_desc->properties = anx7411_psy_props,
+	psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
+
+	psy_desc->get_property = anx7411_psy_get_prop,
+	psy_desc->set_property = anx7411_psy_set_prop,
+	psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
+
+	ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+	ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
+
+	if (IS_ERR(ctx->psy))
+		dev_warn(ctx->dev, "unable to register psy\n");
+
+	return PTR_ERR_OR_ZERO(ctx->psy);
+}
+
+static int anx7411_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx7411_data *plat;
+	struct device *dev = &client->dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -ENODEV;
+
+	plat = kzalloc(sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return -ENOMEM;
+
+	plat->tcpc_client = client;
+	i2c_set_clientdata(client, plat);
+
+	mutex_init(&plat->lock);
+
+	ret = anx7411_register_i2c_dummy_clients(plat, client);
+	if (ret) {
+		dev_err(dev, "fail to reserve I2C bus\n");
+		return ret;
+	}
+
+	ret = anx7411_typec_switch_probe(plat, dev);
+	if (ret) {
+		dev_err(dev, "fail to probe typec switch\n");
+		goto free_i2c_dummy;
+	}
+
+	ret = anx7411_typec_port_probe(plat, dev);
+	if (ret) {
+		dev_err(dev, "fail to probe typec property.\n");
+		ret = -ENODEV;
+		goto free_typec_switch;
+	}
+
+	plat->intp_irq = client->irq;
+	if (!client->irq) {
+		dev_info(dev, "no default interrupt IRQ, probe GPIO interrupt");
+		anx7411_get_gpio_irq(plat);
+	}
+
+	if (!plat->intp_irq) {
+		dev_err(dev, "fail to get interrupt IRQ\n");
+		goto free_typec_port;
+	}
+
+	plat->dev = dev;
+	plat->psy_online = ANX7411_PSY_OFFLINE;
+	anx7411_psy_register(plat);
+
+	if (plat->intp_irq) {
+		INIT_WORK(&plat->work, anx7411_work_func);
+		plat->workqueue = alloc_workqueue("anx7411_work",
+						  WQ_FREEZABLE |
+						  WQ_MEM_RECLAIM,
+						  1);
+		if (!plat->workqueue) {
+			dev_err(dev, "fail to create work queue\n");
+			ret = -ENOMEM;
+			goto free_typec_port;
+		}
+
+		ret = devm_request_threaded_irq(dev, plat->intp_irq,
+						NULL, anx7411_intr_isr,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						"anx7411-intp", plat);
+		if (ret) {
+			dev_err(dev, "fail to request irq\n");
+			goto free_wq;
+		}
+
+		dev_info(dev, "registered irq %d handler\n", plat->intp_irq);
+	}
+
+	anx7411_typec_check_connection(plat);
+
+	pm_runtime_enable(dev);
+
+	return 0;
+
+free_wq:
+	destroy_workqueue(plat->workqueue);
+
+free_typec_port:
+	typec_unregister_port(plat->typec.port);
+	anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+free_typec_switch:
+	anx7411_unregister_switch(plat);
+	anx7411_unregister_mux(plat);
+
+free_i2c_dummy:
+	i2c_unregister_device(plat->spi_client);
+
+	return ret;
+}
+
+static int anx7411_i2c_remove(struct i2c_client *client)
+{
+	struct anx7411_data *plat = i2c_get_clientdata(client);
+
+	anx7411_partner_unregister_altmode(plat);
+	anx7411_unregister_partner(plat);
+
+	if (plat->workqueue)
+		destroy_workqueue(plat->workqueue);
+
+	if (plat->spi_client)
+		i2c_unregister_device(plat->spi_client);
+
+	if (plat->typec.role_sw)
+		usb_role_switch_put(plat->typec.role_sw);
+
+	anx7411_unregister_mux(plat);
+
+	anx7411_unregister_switch(plat);
+
+	if (plat->typec.port)
+		typec_unregister_port(plat->typec.port);
+
+	anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx7411_id[] = {
+	{"anx7411", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7411_id);
+
+static const struct of_device_id anx_match_table[] = {
+	{.compatible = "analogix,anx7411",},
+	{},
+};
+
+static struct i2c_driver anx7411_driver = {
+	.driver = {
+		.name = "anx7411",
+		.of_match_table = anx_match_table,
+		.pm = &anx7411_pm_ops,
+	},
+	.probe = anx7411_i2c_probe,
+	.remove = anx7411_i2c_remove,
+
+	.id_table = anx7411_id,
+};
+
+module_i2c_driver(anx7411_driver);
+
+MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
+MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1.4");
diff --git a/drivers/usb/typec/anx7411.h b/drivers/usb/typec/anx7411.h
new file mode 100644
index 000000000000..97bd670a4d0c
--- /dev/null
+++ b/drivers/usb/typec/anx7411.h
@@ -0,0 +1,271 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
+ *
+ */
+
+#ifndef __ANX7411_H__
+#define __ANX7411_H__
+
+#define TCPC_ADDRESS1		0x58
+#define TCPC_ADDRESS2		0x56
+#define TCPC_ADDRESS3		0x54
+#define TCPC_ADDRESS4		0x52
+#define SPI_ADDRESS1		0x7e
+#define SPI_ADDRESS2		0x6e
+#define SPI_ADDRESS3		0x64
+#define SPI_ADDRESS4		0x62
+
+struct anx7411_i2c_select {
+	u8 tcpc_address;
+	u8 spi_address;
+};
+
+#define VENDOR_ID		0x1F29
+#define PRODUCT_ID		0x7411
+
+/* TCPC register define */
+
+#define TCPC_ROLE_CONTROL	0x1A
+
+#define TCPC_COMMAND		0x23
+#define SINK_CTRL_EN		0x55
+#define SINK_CTRL_DIS		0x44
+
+#define ANALOG_CTRL_10		0xAA
+
+#define STATUS_LEN		2
+#define ALERT_0			0xCB
+#define RECEIVED_MSG		BIT(7)
+#define SOFTWARE_INT		BIT(6)
+#define MSG_LEN			32
+#define HEADER_LEN		2
+#define MSG_HEADER		0x00
+#define MSG_TYPE		0x01
+#define MSG_RAWDATA		0x02
+#define MSG_LEN_MASK		0x1F
+
+#define ALERT_1			0xCC
+#define INTP_POW_ON		BIT(7)
+#define INTP_POW_OFF		BIT(6)
+
+#define VBUS_THRESHOLD_H	0xDD
+#define VBUS_THRESHOLD_L	0xDE
+
+#define FW_CTRL_0		0xF0
+#define UNSTRUCT_VDM_EN		BIT(0)
+#define DELAY_200MS		BIT(1)
+#define VSAFE0			0
+#define VSAFE1			BIT(2)
+#define VSAFE2			BIT(3)
+#define VSAFE3			(BIT(2) | BIT(3))
+#define FRS_EN			BIT(7)
+
+#define FW_PARAM		0xF1
+#define DONGLE_IOP		BIT(0)
+
+#define FW_CTRL_2		0xF7
+#define SINK_CTRL_DIS_FLAG	BIT(5)
+
+/* SPI register define */
+#define OCM_CTRL_0		0x6E
+#define OCM_RESET		BIT(6)
+
+#define MAX_VOLTAGE		0xAC
+#define MAX_POWER		0xAD
+#define MIN_POWER		0xAE
+
+#define REQUEST_VOLTAGE		0xAF
+#define VOLTAGE_UNIT		100 /* mV per unit */
+
+#define REQUEST_CURRENT		0xB1
+#define CURRENT_UNIT		50 /* mA per unit */
+
+#define CMD_SEND_BUF		0xC0
+#define CMD_RECV_BUF		0xE0
+
+#define REQ_VOL_20V_IN_100MV	0xC8
+#define REQ_CUR_2_25A_IN_50MA	0x2D
+#define REQ_CUR_3_25A_IN_50MA	0x41
+
+#define DEF_5V			5000
+#define DEF_1_5A		1500
+
+enum anx7411_typec_message_type {
+	TYPE_SRC_CAP = 0x00,
+	TYPE_SNK_CAP = 0x01,
+	TYPE_SNK_IDENTITY = 0x02,
+	TYPE_SVID = 0x03,
+	TYPE_SET_SNK_DP_CAP = 0x08,
+	TYPE_PSWAP_REQ = 0x10,
+	TYPE_DSWAP_REQ = 0x11,
+	TYPE_VDM = 0x14,
+	TYPE_OBJ_REQ = 0x16,
+	TYPE_DP_ALT_ENTER = 0x19,
+	TYPE_DP_DISCOVER_MODES_INFO = 0x27,
+	TYPE_GET_DP_CONFIG = 0x29,
+	TYPE_DP_CONFIGURE = 0x2A,
+	TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
+	TYPE_GET_DP_ALT_ENTER = 0x2F,
+};
+
+#define REQUEST_CURRENT		0xB1
+#define REQUEST_VOLTAGE		0xAF
+
+#define FW_CTRL_1		0xB2
+#define AUTO_PD_EN		BIT(1)
+#define TRYSRC_EN		BIT(2)
+#define TRYSNK_EN		BIT(3)
+#define FORCE_SEND_RDO		BIT(6)
+
+#define FW_VER			0xB4
+#define FW_SUBVER		0xB5
+
+#define INT_MASK		0xB6
+#define INT_STS			0xB7
+#define OCM_BOOT_UP		BIT(0)
+#define OC_OV_EVENT		BIT(1)
+#define VCONN_CHANGE		BIT(2)
+#define VBUS_CHANGE		BIT(3)
+#define CC_STATUS_CHANGE	BIT(4)
+#define DATA_ROLE_CHANGE	BIT(5)
+#define PR_CONSUMER_GOT_POWER	BIT(6)
+#define HPD_STATUS_CHANGE	BIT(7)
+
+#define SYSTEM_STSTUS		0xB8
+/* 0: SINK off; 1: SINK on */
+#define SINK_STATUS		BIT(1)
+/* 0: VCONN off; 1: VCONN on*/
+#define VCONN_STATUS		BIT(2)
+/* 0: vbus off; 1: vbus on*/
+#define VBUS_STATUS		BIT(3)
+/* 1: host; 0:device*/
+#define DATA_ROLE		BIT(5)
+/* 0: Chunking; 1: Unchunked*/
+#define SUPPORT_UNCHUNKING	BIT(6)
+/* 0: HPD low; 1: HPD high*/
+#define HPD_STATUS		BIT(7)
+
+#define DATA_DFP		1
+#define DATA_UFP		2
+#define POWER_SOURCE		1
+#define POWER_SINK		2
+
+#define CC_STATUS		0xB9
+#define CC1_RD			BIT(0)
+#define CC2_RD			BIT(4)
+#define CC1_RA			BIT(1)
+#define CC2_RA			BIT(5)
+#define CC1_RD			BIT(0)
+#define CC1_RP(cc)		(((cc) >> 2) & 0x03)
+#define CC2_RP(cc)		(((cc) >> 6) & 0x03)
+
+#define PD_REV_INIT		0xBA
+
+#define PD_EXT_MSG_CTRL		0xBB
+#define SRC_CAP_EXT_REPLY	BIT(0)
+#define MANUFACTURER_INFO_REPLY	BIT(1)
+#define BATTERY_STS_REPLY	BIT(2)
+#define BATTERY_CAP_REPLY	BIT(3)
+#define ALERT_REPLY		BIT(4)
+#define STATUS_REPLY		BIT(5)
+#define PPS_STATUS_REPLY	BIT(6)
+#define SNK_CAP_EXT_REPLY	BIT(7)
+
+#define NO_CONNECT		0x00
+#define USB3_1_CONNECTED	0x01
+#define DP_ALT_4LANES		0x02
+#define USB3_1_DP_2LANES	0x03
+#define CC1_CONNECTED		0x01
+#define CC2_CONNECTED		0x02
+#define SELECT_PIN_ASSIGMENT_C	0x04
+#define SELECT_PIN_ASSIGMENT_D	0x08
+#define SELECT_PIN_ASSIGMENT_E	0x10
+#define SELECT_PIN_ASSIGMENT_U	0x00
+#define REDRIVER_ADDRESS	0x20
+#define REDRIVER_OFFSET		0x00
+
+#define DP_SVID			0xFF01
+#define VDM_ACK			0x40
+#define VDM_CMD_RES		0x00
+#define VDM_CMD_DIS_ID		0x01
+#define VDM_CMD_DIS_SVID	0x02
+#define VDM_CMD_DIS_MOD		0x03
+#define VDM_CMD_ENTER_MODE	0x04
+#define VDM_CMD_EXIT_MODE	0x05
+#define VDM_CMD_ATTENTION	0x06
+#define VDM_CMD_GET_STS		0x10
+#define VDM_CMD_AND_ACK_MASK	0x5F
+
+#define MAX_ALTMODE		2
+
+#define HAS_SOURCE_CAP		BIT(0)
+#define HAS_SINK_CAP		BIT(1)
+#define HAS_SINK_WATT		BIT(2)
+
+enum anx7411_psy_state {
+	/* copy from drivers/usb/typec/tcpm */
+	ANX7411_PSY_OFFLINE = 0,
+	ANX7411_PSY_FIXED_ONLINE,
+
+	/* private */
+	/* PD keep in, but disconnct power to bq25700,
+	 * this state can be active when higher capacity adapter plug in,
+	 * and change to ONLINE state when higher capacity adapter plug out
+	 */
+	ANX7411_PSY_HANG = 0xff,
+};
+
+struct typec_params {
+	int request_current; /* ma */
+	int request_voltage; /* mv */
+	int cc_connect;
+	int cc_orientation_valid;
+	int cc_status;
+	int data_role;
+	int power_role;
+	int vconn_role;
+	int dp_altmode_enter;
+	int cust_altmode_enter;
+	struct usb_role_switch *role_sw;
+	struct typec_port *port;
+	struct typec_partner *partner;
+	struct typec_mux *typec_mux;
+	struct typec_switch *typec_switch;
+	struct typec_altmode *amode[MAX_ALTMODE];
+	struct typec_altmode *port_amode[MAX_ALTMODE];
+	struct typec_displayport_data data;
+	int pin_assignment;
+	struct typec_capability caps;
+	u32 src_pdo[PDO_MAX_OBJECTS];
+	u32 sink_pdo[PDO_MAX_OBJECTS];
+	u8 caps_flags;
+	u8 src_pdo_nr;
+	u8 sink_pdo_nr;
+	u8 sink_watt;
+	u8 sink_voltage;
+};
+
+struct anx7411_data {
+	int fw_version;
+	int fw_subversion;
+	struct i2c_client *tcpc_client;
+	struct i2c_client *spi_client;
+	struct gpio_desc *intp_gpiod;
+	struct fwnode_handle *connector_fwnode;
+	struct typec_params typec;
+	int intp_irq;
+	struct work_struct work;
+	struct workqueue_struct *workqueue;
+	/* Lock for interrupt work queue */
+	struct mutex lock;
+
+	enum anx7411_psy_state psy_online;
+	enum power_supply_usb_type usb_type;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	struct device *dev;
+};
+
+#endif /* __ANX7411_H__ */
-- 
2.25.1

Re: [PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Greg Kroah-Hartman]

On Thu, Jan 20, 2022 at 05:36:15PM +0800, Xin Ji wrote:
> Add driver for analogix ANX7411 USB Type-C DRP port controller.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
>  drivers/usb/typec/Kconfig   |   11 +
>  drivers/usb/typec/Makefile  |    1 +
>  drivers/usb/typec/anx7411.c | 1473 +++++++++++++++++++++++++++++++++++
>  drivers/usb/typec/anx7411.h |  271 +++++++
>  4 files changed, 1756 insertions(+)
>  create mode 100644 drivers/usb/typec/anx7411.c
>  create mode 100644 drivers/usb/typec/anx7411.h
> 
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index ab480f38523a..615183f46405 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"
>  
>  source "drivers/usb/typec/tipd/Kconfig"
>  
> +config TYPEC_ANX7411
> +	tristate "Analogix ANX7411 Type-C DRP Port controller driver"
> +	depends on I2C
> +	depends on USB_ROLE_SWITCH
> +	help
> +	  Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
> +	  controller driver.
> +
> +	  If you choose to build this driver as a dynamically linked module, the
> +	  module will be called anx7411.ko.
> +
>  config TYPEC_HD3SS3220
>  	tristate "TI HD3SS3220 Type-C DRP Port controller driver"
>  	depends on I2C
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index a0adb8947a30..f4e7188f174a 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_TYPEC)		+= altmodes/
>  obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
>  obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
>  obj-$(CONFIG_TYPEC_TPS6598X)	+= tipd/
> +obj-$(CONFIG_TYPEC_ANX7411)	+= anx7411.o
>  obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
>  obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
>  obj-$(CONFIG_TYPEC_STUSB160X) 	+= stusb160x.o
> diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
> new file mode 100644
> index 000000000000..e25417a89cdb
> --- /dev/null
> +++ b/drivers/usb/typec/anx7411.c
> @@ -0,0 +1,1473 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> + *
> + */
> +#include <linux/gcd.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/usb/pd.h>
> +#include <linux/usb/role.h>
> +#include <linux/usb/typec.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/workqueue.h>
> +#include <linux/power_supply.h>
> +
> +#include "anx7411.h"
> +
> +#define DEBUG
> +
> +static u8 snk_identity[] = {
> +	VENDOR_ID & 0xFF, (VENDOR_ID >> 8) & 0xFF, 0x00, 0x82,  /* snk_id_hdr */
> +	0x00, 0x00, 0x00, 0x00,                                 /* snk_cert */
> +	0x00, 0x00, PRODUCT_ID & 0xFF, (PRODUCT_ID >> 8) & 0xFF,/* 5snk_ama */
> +};
> +
> +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
> +
> +static int anx7411_reg_read(struct i2c_client *client,
> +			    u8 reg_addr)
> +{
> +	return i2c_smbus_read_byte_data(client, reg_addr);
> +}
> +
> +static int anx7411_reg_block_read(struct i2c_client *client,
> +				  u8 reg_addr, u8 len, u8 *buf)
> +{
> +	return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
> +}
> +
> +static int anx7411_reg_write(struct i2c_client *client,
> +			     u8 reg_addr, u8 reg_val)
> +{
> +	return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
> +}
> +
> +static int anx7411_reg_block_write(struct i2c_client *client,
> +				   u8 reg_addr, u8 len, u8 *buf)
> +{
> +	return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
> +}
> +
> +static struct anx7411_i2c_select anx7411_i2c_addr[] = {
> +	{TCPC_ADDRESS1, SPI_ADDRESS1},
> +	{TCPC_ADDRESS2, SPI_ADDRESS2},
> +	{TCPC_ADDRESS3, SPI_ADDRESS3},
> +	{TCPC_ADDRESS4, SPI_ADDRESS4},
> +};
> +
> +static int anx7411_detect_power_mode(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	int ret;
> +	int mode;
> +
> +	ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> +	if (ret < 0) {
> +		dev_info(dev, "failed to read request current.\n");
> +		return ret;
> +	}
> +	ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
> +
> +	ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> +	if (ret < 0) {
> +		dev_info(dev, "failed to read voltage.\n");
> +		return ret;
> +	}
> +	ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
> +
> +	if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
> +		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> +		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> +		power_supply_changed(ctx->psy);
> +	}
> +
> +	if (!ctx->typec.cc_orientation_valid) {
> +		dev_info(dev, "cc orientation is 0(debug cable plug in).\n");
> +		return 0;
> +	}
> +
> +	if (ctx->typec.cc_connect == CC1_CONNECTED)
> +		mode = CC1_RP(ctx->typec.cc_status);
> +	else
> +		mode = CC2_RP(ctx->typec.cc_status);
> +	if (mode) {
> +		dev_info(dev, "set power opmode as %d.\n", mode - 1);
> +		typec_set_pwr_opmode(ctx->typec.port, mode - 1);
> +		return 0;
> +	}
> +
> +	typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
> +
> +	return 0;
> +}
> +
> +static int anx7411_register_partner(struct anx7411_data *ctx,
> +				    int pd, int accessory)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	struct typec_partner_desc desc;
> +
> +	if (ctx->typec.partner) {
> +		dev_info(dev, "ignore register typec partner request.\n");
> +		return 0;
> +	}
> +
> +	dev_info(dev, "register typec partner port.\n");
> +
> +	desc.usb_pd = pd;
> +	desc.accessory = accessory;
> +	desc.identity = NULL;
> +	ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
> +	if (IS_ERR(ctx->typec.partner)) {
> +		dev_err(dev, "failed to register partner\n");
> +		ctx->typec.partner = NULL;
> +		return PTR_ERR(ctx->typec.partner);
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
> +{
> +	int ret;
> +	int cc1_rd, cc2_rd;
> +	int cc1_ra, cc2_ra;
> +	int cc1_rp, cc2_rp;
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
> +	if (ret < 0) {
> +		dev_info(dev, "failed to read cc status.\n");
> +		return ret;
> +	}
> +
> +	dev_info(dev, "cc status %.02x\n", ret);
> +
> +	ctx->typec.cc_status = ret;
> +
> +	cc1_rd = ret & CC1_RD ? 1 : 0;
> +	cc2_rd = ret & CC2_RD ? 1 : 0;
> +	cc1_ra = ret & CC1_RA ? 1 : 0;
> +	cc2_ra = ret & CC2_RA ? 1 : 0;
> +	cc1_rp = CC1_RP(ret);
> +	cc2_rp = CC2_RP(ret);
> +
> +	/* Debug cable, nothing to do */
> +	if (cc1_rd && cc2_rd) {
> +		ctx->typec.cc_orientation_valid = 0;
> +		anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
> +		return 0;
> +	}
> +
> +	if (cc1_ra && cc2_ra) {
> +		ctx->typec.cc_orientation_valid = 0;
> +		anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
> +		return 0;
> +	}
> +
> +	ctx->typec.cc_orientation_valid = 1;
> +
> +	anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
> +
> +	if (cc1_rd || cc1_rp) {
> +		dev_info(dev, "set orientation to normal\n");
> +		typec_set_orientation(ctx->typec.port,
> +				      TYPEC_ORIENTATION_NORMAL);
> +		ctx->typec.cc_connect = CC1_CONNECTED;
> +	}
> +
> +	if (cc2_rd || cc2_rp) {
> +		dev_info(dev, "set orientation to reverse\n");
> +		typec_set_orientation(ctx->typec.port,
> +				      TYPEC_ORIENTATION_REVERSE);
> +		ctx->typec.cc_connect = CC2_CONNECTED;
> +	}
> +
> +	dev_info(dev, "cc1_rp(%d), cc2_rp(%d)", cc1_rp, cc2_rp);
> +	dev_info(dev, "\tcc1_rd(%d), cc2_rd(%d), cc_connected(%d).\n",
> +		 cc1_rd, cc2_rd, ctx->typec.cc_connect);
> +
> +	return 0;
> +}
> +
> +static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
> +{
> +	int mode = TYPEC_STATE_SAFE;
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	switch (pin_assignment) {
> +	case SELECT_PIN_ASSIGMENT_U:
> +		/* default 4 line USB 3.1 */
> +		mode = TYPEC_STATE_MODAL;
> +		break;
> +	case SELECT_PIN_ASSIGMENT_C:
> +	case SELECT_PIN_ASSIGMENT_E:
> +		/* 4 line DP */
> +		mode = TYPEC_STATE_SAFE;
> +		break;
> +	case SELECT_PIN_ASSIGMENT_D:
> +		/* 2 line DP, 2 line USB */
> +		mode = TYPEC_MODE_USB3;
> +		break;
> +	default:
> +		mode = TYPEC_STATE_SAFE;
> +		break;
> +	}
> +
> +	ctx->typec.pin_assignment = pin_assignment;
> +
> +	dev_info(dev, "pin assignment %d, mux mode %d.\n",
> +		 pin_assignment, mode);
> +
> +	return typec_set_mode(ctx->typec.port, mode);
> +}
> +
> +static void anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	if (!ctx->typec.role_sw) {
> +		dev_info(dev, "no usb role switch");
> +		return;
> +	}
> +
> +	usb_role_switch_set_role(ctx->typec.role_sw, role);
> +}
> +
> +static int anx7411_data_role_detect(struct anx7411_data *ctx)
> +{
> +	int ret;
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> +	if (ret < 0) {
> +		dev_err(dev, "read system status failed: %d.\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> +	ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
> +
> +	typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
> +	typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
> +
> +	if (ctx->typec.data_role == TYPEC_HOST)
> +		anx7411_set_usb_role(ctx, USB_ROLE_HOST);
> +	else
> +		anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
> +
> +	dev_info(dev, "data role change, status(0x%.02x), data role(%d)\n",
> +		 ret, ctx->typec.data_role);
> +
> +	return 0;
> +}
> +
> +static int anx7411_power_role_detect(struct anx7411_data *ctx)
> +{
> +	int ret;
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> +	if (ret < 0) {
> +		dev_err(dev, "read system status failed: %d.\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> +
> +	if (ctx->typec.power_role == TYPEC_SOURCE) {
> +		ctx->typec.request_current = DEF_1_5A;
> +		ctx->typec.request_voltage = DEF_5V;
> +	}
> +
> +	dev_info(dev, "power role change, status(0x%.02x), power role(%d).\n",
> +		 ret, ctx->typec.power_role);
> +	typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
> +
> +	return 0;
> +}
> +
> +static int anx7411_cc_status_detect(struct anx7411_data *ctx)
> +{
> +	anx7411_detect_cc_orientation(ctx);
> +	anx7411_detect_power_mode(ctx);
> +
> +	return 0;
> +}
> +
> +static int anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	int i;
> +
> +	dev_info(dev, "unregister typec altmode.\n");
> +
> +	ctx->typec.dp_altmode_enter = 0;
> +	ctx->typec.cust_altmode_enter = 0;
> +
> +	for (i = 0; i < MAX_ALTMODE; i++)
> +		if (ctx->typec.amode[i]) {
> +			typec_unregister_altmode(ctx->typec.amode[i]);
> +			ctx->typec.amode[i] = NULL;
> +		}
> +
> +	ctx->typec.pin_assignment = 0;
> +	return 0;
> +}
> +
> +static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
> +					  int svid, int vdo)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	struct typec_altmode_desc desc;
> +	int i;
> +
> +	dev_info(dev, "register typec altmode -> vdo = 0x%x.\n", vdo);
> +	desc.svid = svid;
> +	desc.vdo = vdo;
> +
> +	for (i = 0; i < MAX_ALTMODE; i++)
> +		if (!ctx->typec.amode[i])
> +			break;
> +
> +	desc.mode = i + 1; /* start with 1 */
> +
> +	if (i >= MAX_ALTMODE) {
> +		dev_info(dev, "no altmode space for registering\n");
> +		return -ENOMEM;
> +	}
> +
> +	ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
> +							     &desc);
> +	if (IS_ERR(ctx->typec.amode[i])) {
> +		dev_err(dev, "failed to register altmode\n");
> +		ctx->typec.amode[i] = NULL;
> +		return PTR_ERR(ctx->typec.amode);
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_unregister_partner(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	dev_info(dev, "unregister typec partner port.\n");
> +	if (ctx->typec.partner) {
> +		typec_unregister_partner(ctx->typec.partner);
> +		ctx->typec.partner = NULL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	int i;
> +
> +	dev_info(dev, "update typec altmode to true.\n");
> +
> +	if (svid == DP_SVID)
> +		ctx->typec.dp_altmode_enter = 1;
> +	else
> +		ctx->typec.cust_altmode_enter = 1;
> +
> +	for (i = 0; i < MAX_ALTMODE; i++) {
> +		if (!ctx->typec.amode[i])
> +			continue;
> +
> +		if (ctx->typec.amode[i]->svid == svid) {
> +			typec_altmode_update_active(ctx->typec.amode[i], true);
> +			typec_altmode_notify(ctx->typec.amode[i],
> +					     ctx->typec.pin_assignment,
> +					     &ctx->typec.data);
> +			break;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_register_altmode(struct anx7411_data *ctx,
> +				    bool dp_altmode, u8 *buf)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	int ret;
> +	int svid;
> +	int mid;
> +
> +	if (!ctx->typec.partner) {
> +		dev_info(dev, "partner not register yet, ignore altmode(%d)\n",
> +			 dp_altmode);
> +		return 0;
> +	}
> +
> +	svid = DP_SVID;
> +	if (dp_altmode) {
> +		dev_info(dev, "register DP altmode\n");
> +		mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
> +
> +		return anx7411_typec_register_altmode(ctx, svid, mid);
> +	}
> +
> +	svid = (buf[3] << 8) | buf[2];
> +	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) {
> +		dev_info(dev, "svid(0x%x) enter mode\n", svid);
> +		return anx7411_update_altmode(ctx, svid);
> +	}
> +
> +	if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) {
> +		dev_info(dev, "ignore VDM message 0x%.02x%.02x\n",
> +			 buf[0], buf[1]);
> +		return 0;
> +	}
> +
> +	mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
> +
> +	ret = anx7411_typec_register_altmode(ctx, svid, mid);
> +	if (ctx->typec.cust_altmode_enter)
> +		ret |= anx7411_update_altmode(ctx, svid);
> +
> +	return ret;
> +}
> +
> +static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	u8 cur_50ma, vol_100mv;
> +
> +	dev_info(dev, "received message: type:0x%.02x, len:%d, buf[0]:%d\n",
> +		 type, len, buf[0]);
> +
> +	switch (type) {
> +	case TYPE_SRC_CAP:
> +		cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> +		vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> +		dev_info(dev, "get current(%dma), voltage(%dmv), power(%dmw)\n",
> +			 cur_50ma * CURRENT_UNIT, vol_100mv * VOLTAGE_UNIT,
> +			 cur_50ma * vol_100mv * 5);
> +
> +		ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
> +		ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
> +
> +#ifndef CUST_SINK_CTRL_EN
> +		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> +		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> +		power_supply_changed(ctx->psy);
> +#else
> +		/* Enable OCM automatically control sink_ctrl pin*/
> +		dev_info(dev, "Enable OCM auto control sink_ctrl pin\n");
> +		anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
> +				  anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) &
> +				  ~SINK_CTRL_DIS_FLAG);
> +		if (vol_100mv != REQ_VOL_20V_IN_100MV)
> +			break;
> +
> +		if (cur_50ma != REQ_CUR_2_25A_IN_50MA &&
> +		    cur_50ma != REQ_CUR_3_25A_IN_50MA)
> +			break;
> +
> +		/* Disable OCM automatically control sink_ctrl pin*/
> +		dev_info(dev, "Disable OCM auto control sink_ctrl pin\n");
> +		anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
> +				  anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) |
> +				  SINK_CTRL_DIS_FLAG);
> +
> +		ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> +		ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> +		power_supply_changed(ctx->psy);
> +#endif
> +		break;
> +	case TYPE_SNK_CAP:
> +		break;
> +	case TYPE_SVID:
> +		break;
> +	case TYPE_SNK_IDENTITY:
> +		break;
> +	case TYPE_GET_DP_ALT_ENTER:
> +		/* DP alt mode enter success */
> +		if (buf[0])
> +			anx7411_update_altmode(ctx, DP_SVID);
> +		break;
> +	case TYPE_DP_ALT_ENTER:
> +		/* Update DP altmode */
> +		anx7411_update_altmode(ctx, DP_SVID);
> +		break;
> +	case TYPE_OBJ_REQ:
> +		anx7411_detect_power_mode(ctx);
> +		break;
> +	case TYPE_DP_CONFIGURE:
> +		anx7411_set_mux(ctx, buf[1]);
> +		break;
> +	case TYPE_DP_DISCOVER_MODES_INFO:
> +		/* Make sure discover modes valid */
> +		if (buf[0] | buf[1])
> +			/* Register DP Altmode */
> +			anx7411_register_altmode(ctx, 1, buf);
> +		break;
> +	case TYPE_VDM:
> +		/* Register other altmode */
> +		anx7411_register_altmode(ctx, 0, buf);
> +		break;
> +	default:
> +		dev_info(dev, "ignore message(0x%.02x).\n", type);
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static u8 checksum(struct device *dev, u8 *buf, u8 len)
> +{
> +	u8 ret;
> +	u8 i;
> +
> +	ret = 0;
> +	for (i = 0; i < len; i++)
> +		ret += buf[i];
> +
> +	return ret;
> +}
> +
> +static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
> +{
> +	return anx7411_reg_read(client, CMD_SEND_BUF);
> +}
> +
> +static int anx7411_wait_msg_empty(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	int ret, val;
> +
> +	ret = readx_poll_timeout(anx7411_read_msg_ctrl_status,
> +				 client, val, (val < 0) || (val == 0),
> +				 2000, 2000 * 150);
> +	if (ret)
> +		dev_info(dev, "msg buffer busy\n");
> +
> +	return ret;
> +}
> +
> +static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	u8 msg[MSG_LEN];
> +	u8 crc;
> +	int ret;
> +
> +	if (size)
> +		memcpy(&msg[MSG_RAWDATA], buf, size);
> +	msg[MSG_TYPE] = type;
> +	msg[MSG_HEADER] = size + 1;
> +
> +	crc = checksum(dev, msg, size + HEADER_LEN);
> +	msg[size + HEADER_LEN] = 0 - crc;
> +
> +	ret = anx7411_wait_msg_empty(ctx->spi_client);
> +	if (ret) {
> +		dev_info(dev, "firmware busy, ret(0x%.02x)\n", ret);
> +		return ret;
> +	}
> +
> +	anx7411_reg_block_write(ctx->spi_client,
> +				CMD_SEND_BUF + 1, size + HEADER_LEN,
> +				&msg[MSG_TYPE]);
> +	return anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
> +				 msg[MSG_HEADER]);
> +}
> +
> +static int anx7411_process_cmd(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	u8 msg[MSG_LEN];
> +	u8 len;
> +	u8 crc;
> +
> +	/* Read message from firmware */
> +	anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, MSG_LEN, msg);
> +	anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
> +
> +	if (!msg[MSG_HEADER]) {
> +		dev_info(dev, "message empty\n");
> +		return 0;
> +	}
> +
> +	len = msg[MSG_HEADER] & MSG_LEN_MASK;
> +	crc = checksum(dev, msg, len + HEADER_LEN);
> +	if (crc) {
> +		dev_err(dev, "message error crc(0x%.02x)\n", crc);
> +		return -1;
> +	}
> +
> +	return anx7411_parse_cmd(ctx, msg[MSG_TYPE],
> +				 &msg[MSG_RAWDATA], len - 1);
> +}
> +
> +static void anx7411_translate_payload(struct device *dev, u32 *payload,
> +				      u32 *pdo, int nr, const char *type)
> +{
> +	int i;
> +
> +	dev_info(dev, "convert %s pdos to little endian format\n", type);
> +	if (nr > PDO_MAX_OBJECTS) {
> +		dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
> +			nr, PDO_MAX_OBJECTS);
> +
> +		return;
> +	}
> +
> +	for (i = 0; i < nr; i++)
> +		payload[i] = cpu_to_le32(pdo[i]);
> +}
> +
> +static void anx7411_config(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	struct typec_params *typecp = &ctx->typec;
> +	u32 payload[PDO_MAX_OBJECTS];
> +
> +	dev_info(dev, "initial anx7411\n");
> +	/* Config PD FW work under PD 2.0 */
> +	anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
> +	anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
> +			  UNSTRUCT_VDM_EN | DELAY_200MS |
> +			  VSAFE1 | FRS_EN);
> +	anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
> +			  AUTO_PD_EN | FORCE_SEND_RDO);
> +
> +	/* Set VBUS current threshold */
> +	anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
> +	anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
> +
> +	/* Fix dongle compatible issue */
> +	anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
> +			  anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
> +			  DONGLE_IOP);
> +	anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
> +
> +	anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
> +
> +	if (typecp->caps_flags & HAS_SOURCE_CAP) {
> +		anx7411_translate_payload(dev, payload, typecp->src_pdo,
> +					  typecp->src_pdo_nr, "source");
> +		anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
> +				 typecp->src_pdo_nr * 4);
> +		anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
> +				 sizeof(snk_identity));
> +		anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
> +				 sizeof(dp_caps));
> +	}
> +
> +	if (typecp->caps_flags & HAS_SINK_CAP) {
> +		anx7411_translate_payload(dev, payload, typecp->sink_pdo,
> +					  typecp->sink_pdo_nr, "sink");
> +		anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
> +				 typecp->sink_pdo_nr * 4);
> +	}
> +
> +	if (typecp->caps_flags & HAS_SINK_WATT) {
> +		if (typecp->sink_watt) {
> +			anx7411_reg_write(ctx->spi_client, MAX_POWER,
> +					  typecp->sink_watt);
> +			/* Set min power to 1W */
> +			anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
> +		}
> +
> +		if (typecp->sink_voltage)
> +			anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
> +					  typecp->sink_voltage);
> +	}
> +
> +	if (!typecp->caps_flags)
> +		usleep_range(5000, 6000);
> +
> +	ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
> +	ctx->fw_subversion = anx7411_reg_read(ctx->spi_client,
> +					      FW_SUBVER);
> +	dev_info(dev, "power on, ocm version %.02x%.02x\n",
> +		 ctx->fw_version, ctx->fw_subversion);
> +}
> +
> +static void anx7411_chip_standby(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->tcpc_client->dev;
> +
> +	dev_info(dev, "Anx7411 enter into standby mode.\n");
> +
> +	anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
> +			  anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
> +			  OCM_RESET);
> +	anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
> +	/* Set TCPC to RD and DRP enable */
> +	anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CONTROL, 0x4A);
> +	/* Send DRP toggle command */
> +	anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0x99);
> +
> +	/* Send TCPC enter standby command */
> +	anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0xFF);
> +}
> +
> +static void anx7411_work_func(struct work_struct *work)
> +{
> +	int ret;
> +	u8 buf[STATUS_LEN];
> +	u8 int_change, int_status, alert0, alert1;
> +	struct anx7411_data *ctx = container_of(work,
> +						struct anx7411_data, work);
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	mutex_lock(&ctx->lock);
> +
> +	/* Read interrupt change status */
> +	ret = anx7411_reg_block_read(ctx->spi_client, INT_STS,
> +				     STATUS_LEN, buf);
> +	if (ret < 0) {
> +		/* Power standby mode, just return */
> +		goto unlock;
> +	}
> +	int_change = buf[0];
> +	int_status = buf[1];
> +
> +	/* Read alert register */
> +	ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0,
> +				     STATUS_LEN, buf);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to read register(%d)\n", ALERT_0);
> +		goto unlock;
> +	}
> +	alert0 = buf[0];
> +	alert1 = buf[1];
> +
> +	/* Clear interrupt and alert status */
> +	anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> +	anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
> +	anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
> +
> +	dev_info(dev, "int_change(0x%.02x), int_status(0x%.02x).\n",
> +		 int_change, int_status);
> +	dev_info(dev, "alert0(0x%.02x), alert1(0x%.02x).\n", alert0, alert1);
> +
> +	if (alert1 & INTP_POW_OFF) {
> +		anx7411_partner_unregister_altmode(ctx);
> +		anx7411_set_usb_role(ctx, USB_ROLE_NONE);
> +		anx7411_unregister_partner(ctx);
> +		ctx->psy_online = ANX7411_PSY_OFFLINE;
> +		ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> +		ctx->typec.request_voltage = 0;
> +		ctx->typec.request_current = 0;
> +		power_supply_changed(ctx->psy);
> +		anx7411_chip_standby(ctx);
> +		goto unlock;
> +	}
> +
> +	if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
> +		anx7411_config(ctx);
> +		anx7411_data_role_detect(ctx);
> +		anx7411_power_role_detect(ctx);
> +		anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> +	}
> +
> +	if (alert0 & RECEIVED_MSG)
> +		anx7411_process_cmd(ctx);
> +
> +	ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> +	if (ctx->typec.data_role != ret)
> +		anx7411_data_role_detect(ctx);
> +
> +	ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> +	if (ctx->typec.power_role != ret)
> +		anx7411_power_role_detect(ctx);
> +
> +	if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
> +		anx7411_cc_status_detect(ctx);
> +
> +unlock:
> +	mutex_unlock(&ctx->lock);
> +}
> +
> +static irqreturn_t anx7411_intr_isr(int irq, void *data)
> +{
> +	struct anx7411_data *ctx = (struct anx7411_data *)data;
> +
> +	queue_work(ctx->workqueue, &ctx->work);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
> +					      struct i2c_client *client)
> +{
> +	int i;
> +	u8 spi_addr;
> +
> +	for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
> +		if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
> +			spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
> +			ctx->spi_client = i2c_new_dummy_device(client->adapter,
> +							       spi_addr);
> +			if (ctx->spi_client) {
> +				dev_info(&client->dev, "found spi slave\n");
> +				return 0;
> +			}
> +		}
> +	}
> +
> +	dev_err(&client->dev, "unable to get SPI slave\n");
> +	return -ENOMEM;
> +}
> +
> +static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
> +{
> +	int i;
> +
> +	for (i = 0; i < MAX_ALTMODE; i++)
> +		if (adev[i]) {
> +			typec_unregister_altmode(adev[i]);
> +			adev[i] = NULL;
> +		}
> +}
> +
> +static int anx7411_usb_mux_set(struct typec_mux *mux,
> +			       struct typec_mux_state *state)
> +{
> +	struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
> +	struct device *dev = &ctx->spi_client->dev;
> +	int has_dp;
> +
> +	has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> +		  state->alt->mode == USB_TYPEC_DP_MODE);
> +	dev_info(dev, "callback: mux set: %d", has_dp);
> +	if (!has_dp) {
> +		dev_info(dev, "dp altmode not register\n");
> +		return 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_usb_set_orientation(struct typec_switch *sw,
> +				       enum typec_orientation orientation)
> +{
> +	struct anx7411_data *ctx = typec_switch_get_drvdata(sw);
> +	struct device *dev = &ctx->spi_client->dev;
> +
> +	dev_info(dev, "callback: orientation set %d\n", orientation);
> +
> +	return 0;
> +}
> +
> +static int anx7411_register_switch(struct anx7411_data *ctx,
> +				   struct device *dev,
> +				   struct fwnode_handle *fwnode)
> +{
> +	struct typec_switch_desc sw_desc = { };
> +
> +	sw_desc.fwnode = fwnode;
> +	sw_desc.drvdata = ctx;
> +	sw_desc.name = fwnode_get_name(fwnode);
> +	sw_desc.set = anx7411_usb_set_orientation;
> +
> +	ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
> +	if (IS_ERR(ctx->typec.typec_switch)) {
> +		dev_err(dev, "switch register failed\n");
> +		return PTR_ERR(ctx->typec.typec_switch);
> +	}
> +
> +	return 0;
> +}
> +
> +static int anx7411_register_mux(struct anx7411_data *ctx,
> +				struct device *dev,
> +				struct fwnode_handle *fwnode)
> +{
> +	struct typec_mux_desc mux_desc = { };
> +
> +	mux_desc.fwnode = fwnode;
> +	mux_desc.drvdata = ctx;
> +	mux_desc.name = fwnode_get_name(fwnode);
> +	mux_desc.set = anx7411_usb_mux_set;
> +
> +	ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
> +	if (IS_ERR(ctx->typec.typec_mux)) {
> +		dev_err(dev, "mux register failed\n");
> +		return PTR_ERR(ctx->typec.typec_mux);
> +	}
> +
> +	return 0;
> +}
> +
> +static void anx7411_unregister_mux(struct anx7411_data *ctx)
> +{
> +	if (ctx->typec.typec_mux) {
> +		typec_mux_unregister(ctx->typec.typec_mux);
> +		ctx->typec.typec_mux = NULL;
> +	}
> +}
> +
> +static void anx7411_unregister_switch(struct anx7411_data *ctx)
> +{
> +	if (ctx->typec.typec_switch) {
> +		typec_switch_unregister(ctx->typec.typec_switch);
> +		ctx->typec.typec_switch = NULL;
> +	}
> +}
> +
> +static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
> +				      struct device *dev)
> +{
> +	int ret;
> +	struct device_node *node;
> +
> +	node = of_find_node_by_name(dev->of_node, "orientation_switch");
> +	if (!node) {
> +		dev_info(dev, "no typec switch exist\n");
> +		return 0;
> +	}
> +
> +	dev_info(dev, "register switch\n");
> +	ret = anx7411_register_switch(ctx, dev, &node->fwnode);
> +	if (ret) {
> +		dev_err(dev, "failed register switch");
> +		return ret;
> +	}
> +
> +	node = of_find_node_by_name(dev->of_node, "mode_switch");
> +	if (!node) {
> +		dev_err(dev, "no typec mux exist");
> +		ret = -ENODEV;
> +		goto unregister_switch;
> +	}
> +
> +	dev_info(dev, "register mode switch\n");
> +	ret = anx7411_register_mux(ctx, dev, &node->fwnode);
> +	if (ret) {
> +		dev_err(dev, "failed register mode switch");
> +		ret = -ENODEV;
> +		goto unregister_switch;
> +	}
> +
> +	return 0;
> +
> +unregister_switch:
> +	anx7411_unregister_switch(ctx);
> +
> +	return ret;
> +}
> +
> +static int anx7411_typec_port_probe(struct anx7411_data *ctx,
> +				    struct device *dev)
> +{
> +	struct typec_capability *cap = &ctx->typec.caps;
> +	struct typec_params *typecp = &ctx->typec;
> +	struct fwnode_handle *fwnode;
> +	const char *buf;
> +	int ret, i;
> +
> +	fwnode = device_get_named_child_node(dev, "connector");
> +	if (!fwnode)
> +		return -EINVAL;
> +
> +	ret = fwnode_property_read_string(fwnode, "power-role", &buf);
> +	if (ret) {
> +		dev_err(dev, "power-role not found: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = typec_find_port_power_role(buf);
> +	if (ret < 0)
> +		return ret;
> +	cap->type = ret;
> +
> +	ret = fwnode_property_read_string(fwnode, "data-role", &buf);
> +	if (ret) {
> +		dev_err(dev, "data-role not found: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = typec_find_port_data_role(buf);
> +	if (ret < 0)
> +		return ret;
> +	cap->data = ret;
> +
> +	ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
> +	if (ret) {
> +		dev_err(dev, "try-power-role not found: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = typec_find_power_role(buf);
> +	if (ret < 0)
> +		return ret;
> +	cap->prefer_role = ret;
> +
> +	/* Get source pdos */
> +	ret = fwnode_property_count_u32(fwnode, "source-pdos");
> +	if (ret > 0) {
> +		dev_info(dev, "%d source-pdos found\n", ret);
> +		typecp->src_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> +		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> +						     typecp->src_pdo,
> +						     typecp->src_pdo_nr);
> +		if (ret < 0) {
> +			dev_err(dev, "source cap validate failed: %d\n", ret);
> +			return -EINVAL;
> +		}
> +
> +		typecp->caps_flags |= HAS_SOURCE_CAP;
> +	}
> +
> +	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
> +	if (ret > 0) {
> +		dev_info(dev, "%d sink-pdos found\n", ret);
> +		typecp->sink_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> +		ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
> +						     typecp->sink_pdo,
> +						     typecp->sink_pdo_nr);
> +		if (ret < 0) {
> +			dev_err(dev, "sink cap validate failed: %d\n", ret);
> +			return -EINVAL;
> +		}
> +
> +		for (i = 0; i < typecp->sink_pdo_nr; i++) {
> +			ret = 0;
> +			switch (pdo_type(typecp->sink_pdo[i])) {
> +			case PDO_TYPE_FIXED:
> +				ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
> +				break;
> +			case PDO_TYPE_BATT:
> +			case PDO_TYPE_VAR:
> +				ret = pdo_max_voltage(typecp->sink_pdo[i]);
> +				break;
> +			case PDO_TYPE_APDO:
> +			default:
> +				ret = 0;
> +				break;
> +			}
> +
> +			/* 100mv per unit */
> +			typecp->sink_voltage = max(5000, ret) / 100;
> +		}
> +
> +		typecp->caps_flags |= HAS_SINK_CAP;
> +	}
> +
> +	if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
> +		dev_info(dev, "%d sink-microwat found\n", ret);
> +		typecp->sink_watt = ret / 500000; /* 500mw per unit */
> +		typecp->caps_flags |= HAS_SINK_WATT;
> +	}
> +
> +	cap->fwnode = fwnode;
> +
> +	ctx->typec.role_sw = usb_role_switch_get(dev);
> +	if (IS_ERR(ctx->typec.role_sw)) {
> +		dev_err(dev, "USB role switch not found.\n");
> +		ctx->typec.role_sw = NULL;
> +	}
> +
> +	ctx->typec.port = typec_register_port(dev, cap);
> +	if (IS_ERR(ctx->typec.port)) {
> +		ret = PTR_ERR(ctx->typec.port);
> +		ctx->typec.port = NULL;
> +		dev_err(dev, "Failed to register type c port %d\n", ret);
> +		return ret;
> +	}
> +
> +	typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
> +				     ctx->typec.port_amode,
> +				     MAX_ALTMODE);
> +
> +	return 0;
> +}
> +
> +static int anx7411_typec_check_connection(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->spi_client->dev;
> +	int ret;
> +
> +	ret = anx7411_reg_read(ctx->spi_client, FW_VER);
> +	if (ret < 0) {
> +		/* No device attached in typec port */
> +		dev_info(dev, "no connection detect.\n");
> +		return 0;
> +	}
> +
> +	dev_info(dev, "detected typec connected, ocm ver:0x%.02x.\n", ret);
> +	dev_info(dev, "force clear interrupt and alert.\n");
> +	/* Clear interrupt and alert status */
> +	anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> +	anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
> +	anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
> +
> +	anx7411_cc_status_detect(ctx);
> +
> +	anx7411_power_role_detect(ctx);
> +
> +	dev_info(dev, "PD %s voltage(%d), current(%d).\n",
> +		 ctx->typec.power_role == TYPEC_SOURCE ? "supply" : "request",
> +		 ctx->typec.request_voltage, ctx->typec.request_current);
> +
> +	anx7411_data_role_detect(ctx);
> +
> +	anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> +
> +	anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
> +
> +	anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
> +{
> +	struct anx7411_data *ctx = dev_get_drvdata(dev);
> +
> +	mutex_lock(&ctx->lock);
> +
> +	anx7411_partner_unregister_altmode(ctx);
> +
> +	if (ctx->typec.partner)
> +		anx7411_unregister_partner(ctx);
> +
> +	mutex_unlock(&ctx->lock);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
> +{
> +	struct anx7411_data *ctx = dev_get_drvdata(dev);
> +
> +	mutex_lock(&ctx->lock);
> +	/* Detect PD connection */
> +	anx7411_typec_check_connection(ctx);
> +
> +	mutex_unlock(&ctx->lock);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops anx7411_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
> +			   anx7411_runtime_pm_resume, NULL)
> +};
> +
> +static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
> +{
> +	struct device *dev = &ctx->tcpc_client->dev;
> +
> +	ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
> +	if (!ctx->intp_gpiod) {
> +		dev_info(dev, "no interrupt gpio property\n");
> +		return;
> +	}
> +
> +	ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
> +	dev_info(dev, "request gpio(%d) irq(%d)\n",
> +		 desc_to_gpio(ctx->intp_gpiod), ctx->intp_irq);
> +
> +	if (!ctx->intp_irq)
> +		dev_err(dev, "failed to get GPIO IRQ\n");
> +}
> +
> +static const char *anx7411_psy_name_prefix = "anx7411-source-psy-";
> +
> +static enum power_supply_usb_type anx7411_psy_usb_types[] = {
> +	POWER_SUPPLY_USB_TYPE_C,
> +	POWER_SUPPLY_USB_TYPE_PD,
> +	POWER_SUPPLY_USB_TYPE_PD_PPS,
> +};
> +
> +static enum power_supply_property anx7411_psy_props[] = {
> +	POWER_SUPPLY_PROP_USB_TYPE,
> +	POWER_SUPPLY_PROP_ONLINE,
> +	POWER_SUPPLY_PROP_VOLTAGE_MIN,
> +	POWER_SUPPLY_PROP_VOLTAGE_MAX,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +	POWER_SUPPLY_PROP_CURRENT_MAX,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +};
> +
> +static int anx7411_psy_set_prop(struct power_supply *psy,
> +				enum power_supply_property psp,
> +				const union power_supply_propval *val)
> +{
> +	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> +	int ret = 0;
> +
> +	if (psp == POWER_SUPPLY_PROP_ONLINE) {
> +		pr_info("[DEBUG] set prop -> %d\n", val->intval);
> +		ctx->psy_online = val->intval;
> +#ifdef CUST_SINK_CTRL_EN
> +		if (ctx->psy_online == ANX7411_PSY_HANG)
> +			anx7411_reg_write(ctx->tcpc_client,
> +					  TCPC_COMMAND,
> +					  SINK_CTRL_DIS);
> +		else if (ctx->psy_online)
> +			anx7411_reg_write(ctx->tcpc_client,
> +					  TCPC_COMMAND,
> +					  SINK_CTRL_EN);
> +#endif
> +	} else {
> +		ret = -EINVAL;
> +	}
> +
> +	power_supply_changed(ctx->psy);
> +	return ret;
> +}
> +
> +static int anx7411_psy_prop_writeable(struct power_supply *psy,
> +				      enum power_supply_property psp)
> +{
> +	return (psp == POWER_SUPPLY_PROP_ONLINE) ? 1 : 0;
> +}
> +
> +static int anx7411_psy_get_prop(struct power_supply *psy,
> +				enum power_supply_property psp,
> +				union power_supply_propval *val)
> +{
> +	struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> +	int ret = 0;
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_USB_TYPE:
> +		val->intval = ctx->usb_type;
> +		break;
> +	case POWER_SUPPLY_PROP_ONLINE:
> +		val->intval = ctx->psy_online;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> +	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> +		val->intval = (ctx->psy_online) ?
> +			ctx->typec.request_voltage * 1000 : 0;
> +		break;
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +	case POWER_SUPPLY_PROP_CURRENT_MAX:
> +		val->intval = (ctx->psy_online) ?
> +			ctx->typec.request_current * 1000 : 0;
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +	return ret;
> +}
> +
> +static int anx7411_psy_register(struct anx7411_data *ctx)
> +{
> +	struct power_supply_config psy_cfg = {};
> +	const char *port_dev_name = dev_name(ctx->dev);
> +	size_t psy_name_len = strlen(anx7411_psy_name_prefix) +
> +				     strlen(port_dev_name) + 1;
> +	char *psy_name;
> +	struct power_supply_desc *psy_desc = &ctx->psy_desc;
> +
> +	psy_cfg.drv_data = ctx;
> +	psy_cfg.fwnode = dev_fwnode(ctx->dev);
> +	psy_name = devm_kzalloc(ctx->dev, psy_name_len, GFP_KERNEL);
> +	if (!psy_name) {
> +		dev_warn(ctx->dev, "unable to alloc psy memory\n");
> +		return -ENOMEM;
> +	}
> +
> +	snprintf(psy_name, psy_name_len, "%s%s", anx7411_psy_name_prefix,
> +		 port_dev_name);
> +
> +	psy_desc->name = psy_name;
> +	psy_desc->type = POWER_SUPPLY_TYPE_USB;
> +	psy_desc->usb_types = anx7411_psy_usb_types;
> +	psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
> +	psy_desc->properties = anx7411_psy_props,
> +	psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
> +
> +	psy_desc->get_property = anx7411_psy_get_prop,
> +	psy_desc->set_property = anx7411_psy_set_prop,
> +	psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
> +
> +	ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> +	ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
> +
> +	if (IS_ERR(ctx->psy))
> +		dev_warn(ctx->dev, "unable to register psy\n");
> +
> +	return PTR_ERR_OR_ZERO(ctx->psy);
> +}
> +
> +static int anx7411_i2c_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	struct anx7411_data *plat;
> +	struct device *dev = &client->dev;
> +	int ret;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> +		return -ENODEV;
> +
> +	plat = kzalloc(sizeof(*plat), GFP_KERNEL);
> +	if (!plat)
> +		return -ENOMEM;
> +
> +	plat->tcpc_client = client;
> +	i2c_set_clientdata(client, plat);
> +
> +	mutex_init(&plat->lock);
> +
> +	ret = anx7411_register_i2c_dummy_clients(plat, client);
> +	if (ret) {
> +		dev_err(dev, "fail to reserve I2C bus\n");
> +		return ret;
> +	}
> +
> +	ret = anx7411_typec_switch_probe(plat, dev);
> +	if (ret) {
> +		dev_err(dev, "fail to probe typec switch\n");
> +		goto free_i2c_dummy;
> +	}
> +
> +	ret = anx7411_typec_port_probe(plat, dev);
> +	if (ret) {
> +		dev_err(dev, "fail to probe typec property.\n");
> +		ret = -ENODEV;
> +		goto free_typec_switch;
> +	}
> +
> +	plat->intp_irq = client->irq;
> +	if (!client->irq) {
> +		dev_info(dev, "no default interrupt IRQ, probe GPIO interrupt");
> +		anx7411_get_gpio_irq(plat);
> +	}
> +
> +	if (!plat->intp_irq) {
> +		dev_err(dev, "fail to get interrupt IRQ\n");
> +		goto free_typec_port;
> +	}
> +
> +	plat->dev = dev;
> +	plat->psy_online = ANX7411_PSY_OFFLINE;
> +	anx7411_psy_register(plat);
> +
> +	if (plat->intp_irq) {
> +		INIT_WORK(&plat->work, anx7411_work_func);
> +		plat->workqueue = alloc_workqueue("anx7411_work",
> +						  WQ_FREEZABLE |
> +						  WQ_MEM_RECLAIM,
> +						  1);
> +		if (!plat->workqueue) {
> +			dev_err(dev, "fail to create work queue\n");
> +			ret = -ENOMEM;
> +			goto free_typec_port;
> +		}
> +
> +		ret = devm_request_threaded_irq(dev, plat->intp_irq,
> +						NULL, anx7411_intr_isr,
> +						IRQF_TRIGGER_FALLING |
> +						IRQF_ONESHOT,
> +						"anx7411-intp", plat);
> +		if (ret) {
> +			dev_err(dev, "fail to request irq\n");
> +			goto free_wq;
> +		}
> +
> +		dev_info(dev, "registered irq %d handler\n", plat->intp_irq);
> +	}
> +
> +	anx7411_typec_check_connection(plat);
> +
> +	pm_runtime_enable(dev);
> +
> +	return 0;
> +
> +free_wq:
> +	destroy_workqueue(plat->workqueue);
> +
> +free_typec_port:
> +	typec_unregister_port(plat->typec.port);
> +	anx7411_port_unregister_altmodes(plat->typec.port_amode);
> +
> +free_typec_switch:
> +	anx7411_unregister_switch(plat);
> +	anx7411_unregister_mux(plat);
> +
> +free_i2c_dummy:
> +	i2c_unregister_device(plat->spi_client);
> +
> +	return ret;
> +}
> +
> +static int anx7411_i2c_remove(struct i2c_client *client)
> +{
> +	struct anx7411_data *plat = i2c_get_clientdata(client);
> +
> +	anx7411_partner_unregister_altmode(plat);
> +	anx7411_unregister_partner(plat);
> +
> +	if (plat->workqueue)
> +		destroy_workqueue(plat->workqueue);
> +
> +	if (plat->spi_client)
> +		i2c_unregister_device(plat->spi_client);
> +
> +	if (plat->typec.role_sw)
> +		usb_role_switch_put(plat->typec.role_sw);
> +
> +	anx7411_unregister_mux(plat);
> +
> +	anx7411_unregister_switch(plat);
> +
> +	if (plat->typec.port)
> +		typec_unregister_port(plat->typec.port);
> +
> +	anx7411_port_unregister_altmodes(plat->typec.port_amode);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id anx7411_id[] = {
> +	{"anx7411", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, anx7411_id);
> +
> +static const struct of_device_id anx_match_table[] = {
> +	{.compatible = "analogix,anx7411",},
> +	{},
> +};
> +
> +static struct i2c_driver anx7411_driver = {
> +	.driver = {
> +		.name = "anx7411",
> +		.of_match_table = anx_match_table,
> +		.pm = &anx7411_pm_ops,
> +	},
> +	.probe = anx7411_i2c_probe,
> +	.remove = anx7411_i2c_remove,
> +
> +	.id_table = anx7411_id,
> +};
> +
> +module_i2c_driver(anx7411_driver);
> +
> +MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
> +MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION("0.1.4");
> diff --git a/drivers/usb/typec/anx7411.h b/drivers/usb/typec/anx7411.h
> new file mode 100644
> index 000000000000..97bd670a4d0c
> --- /dev/null
> +++ b/drivers/usb/typec/anx7411.h
> @@ -0,0 +1,271 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +/*
> + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> + *
> + */
> +
> +#ifndef __ANX7411_H__
> +#define __ANX7411_H__
> +
> +#define TCPC_ADDRESS1		0x58
> +#define TCPC_ADDRESS2		0x56
> +#define TCPC_ADDRESS3		0x54
> +#define TCPC_ADDRESS4		0x52
> +#define SPI_ADDRESS1		0x7e
> +#define SPI_ADDRESS2		0x6e
> +#define SPI_ADDRESS3		0x64
> +#define SPI_ADDRESS4		0x62
> +
> +struct anx7411_i2c_select {
> +	u8 tcpc_address;
> +	u8 spi_address;
> +};
> +
> +#define VENDOR_ID		0x1F29
> +#define PRODUCT_ID		0x7411
> +
> +/* TCPC register define */
> +
> +#define TCPC_ROLE_CONTROL	0x1A
> +
> +#define TCPC_COMMAND		0x23
> +#define SINK_CTRL_EN		0x55
> +#define SINK_CTRL_DIS		0x44
> +
> +#define ANALOG_CTRL_10		0xAA
> +
> +#define STATUS_LEN		2
> +#define ALERT_0			0xCB
> +#define RECEIVED_MSG		BIT(7)
> +#define SOFTWARE_INT		BIT(6)
> +#define MSG_LEN			32
> +#define HEADER_LEN		2
> +#define MSG_HEADER		0x00
> +#define MSG_TYPE		0x01
> +#define MSG_RAWDATA		0x02
> +#define MSG_LEN_MASK		0x1F
> +
> +#define ALERT_1			0xCC
> +#define INTP_POW_ON		BIT(7)
> +#define INTP_POW_OFF		BIT(6)
> +
> +#define VBUS_THRESHOLD_H	0xDD
> +#define VBUS_THRESHOLD_L	0xDE
> +
> +#define FW_CTRL_0		0xF0
> +#define UNSTRUCT_VDM_EN		BIT(0)
> +#define DELAY_200MS		BIT(1)
> +#define VSAFE0			0
> +#define VSAFE1			BIT(2)
> +#define VSAFE2			BIT(3)
> +#define VSAFE3			(BIT(2) | BIT(3))
> +#define FRS_EN			BIT(7)
> +
> +#define FW_PARAM		0xF1
> +#define DONGLE_IOP		BIT(0)
> +
> +#define FW_CTRL_2		0xF7
> +#define SINK_CTRL_DIS_FLAG	BIT(5)
> +
> +/* SPI register define */
> +#define OCM_CTRL_0		0x6E
> +#define OCM_RESET		BIT(6)
> +
> +#define MAX_VOLTAGE		0xAC
> +#define MAX_POWER		0xAD
> +#define MIN_POWER		0xAE
> +
> +#define REQUEST_VOLTAGE		0xAF
> +#define VOLTAGE_UNIT		100 /* mV per unit */
> +
> +#define REQUEST_CURRENT		0xB1
> +#define CURRENT_UNIT		50 /* mA per unit */
> +
> +#define CMD_SEND_BUF		0xC0
> +#define CMD_RECV_BUF		0xE0
> +
> +#define REQ_VOL_20V_IN_100MV	0xC8
> +#define REQ_CUR_2_25A_IN_50MA	0x2D
> +#define REQ_CUR_3_25A_IN_50MA	0x41
> +
> +#define DEF_5V			5000
> +#define DEF_1_5A		1500
> +
> +enum anx7411_typec_message_type {
> +	TYPE_SRC_CAP = 0x00,
> +	TYPE_SNK_CAP = 0x01,
> +	TYPE_SNK_IDENTITY = 0x02,
> +	TYPE_SVID = 0x03,
> +	TYPE_SET_SNK_DP_CAP = 0x08,
> +	TYPE_PSWAP_REQ = 0x10,
> +	TYPE_DSWAP_REQ = 0x11,
> +	TYPE_VDM = 0x14,
> +	TYPE_OBJ_REQ = 0x16,
> +	TYPE_DP_ALT_ENTER = 0x19,
> +	TYPE_DP_DISCOVER_MODES_INFO = 0x27,
> +	TYPE_GET_DP_CONFIG = 0x29,
> +	TYPE_DP_CONFIGURE = 0x2A,
> +	TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
> +	TYPE_GET_DP_ALT_ENTER = 0x2F,
> +};
> +
> +#define REQUEST_CURRENT		0xB1
> +#define REQUEST_VOLTAGE		0xAF
> +
> +#define FW_CTRL_1		0xB2
> +#define AUTO_PD_EN		BIT(1)
> +#define TRYSRC_EN		BIT(2)
> +#define TRYSNK_EN		BIT(3)
> +#define FORCE_SEND_RDO		BIT(6)
> +
> +#define FW_VER			0xB4
> +#define FW_SUBVER		0xB5
> +
> +#define INT_MASK		0xB6
> +#define INT_STS			0xB7
> +#define OCM_BOOT_UP		BIT(0)
> +#define OC_OV_EVENT		BIT(1)
> +#define VCONN_CHANGE		BIT(2)
> +#define VBUS_CHANGE		BIT(3)
> +#define CC_STATUS_CHANGE	BIT(4)
> +#define DATA_ROLE_CHANGE	BIT(5)
> +#define PR_CONSUMER_GOT_POWER	BIT(6)
> +#define HPD_STATUS_CHANGE	BIT(7)
> +
> +#define SYSTEM_STSTUS		0xB8
> +/* 0: SINK off; 1: SINK on */
> +#define SINK_STATUS		BIT(1)
> +/* 0: VCONN off; 1: VCONN on*/
> +#define VCONN_STATUS		BIT(2)
> +/* 0: vbus off; 1: vbus on*/
> +#define VBUS_STATUS		BIT(3)
> +/* 1: host; 0:device*/
> +#define DATA_ROLE		BIT(5)
> +/* 0: Chunking; 1: Unchunked*/
> +#define SUPPORT_UNCHUNKING	BIT(6)
> +/* 0: HPD low; 1: HPD high*/
> +#define HPD_STATUS		BIT(7)
> +
> +#define DATA_DFP		1
> +#define DATA_UFP		2
> +#define POWER_SOURCE		1
> +#define POWER_SINK		2
> +
> +#define CC_STATUS		0xB9
> +#define CC1_RD			BIT(0)
> +#define CC2_RD			BIT(4)
> +#define CC1_RA			BIT(1)
> +#define CC2_RA			BIT(5)
> +#define CC1_RD			BIT(0)
> +#define CC1_RP(cc)		(((cc) >> 2) & 0x03)
> +#define CC2_RP(cc)		(((cc) >> 6) & 0x03)
> +
> +#define PD_REV_INIT		0xBA
> +
> +#define PD_EXT_MSG_CTRL		0xBB
> +#define SRC_CAP_EXT_REPLY	BIT(0)
> +#define MANUFACTURER_INFO_REPLY	BIT(1)
> +#define BATTERY_STS_REPLY	BIT(2)
> +#define BATTERY_CAP_REPLY	BIT(3)
> +#define ALERT_REPLY		BIT(4)
> +#define STATUS_REPLY		BIT(5)
> +#define PPS_STATUS_REPLY	BIT(6)
> +#define SNK_CAP_EXT_REPLY	BIT(7)
> +
> +#define NO_CONNECT		0x00
> +#define USB3_1_CONNECTED	0x01
> +#define DP_ALT_4LANES		0x02
> +#define USB3_1_DP_2LANES	0x03
> +#define CC1_CONNECTED		0x01
> +#define CC2_CONNECTED		0x02
> +#define SELECT_PIN_ASSIGMENT_C	0x04
> +#define SELECT_PIN_ASSIGMENT_D	0x08
> +#define SELECT_PIN_ASSIGMENT_E	0x10
> +#define SELECT_PIN_ASSIGMENT_U	0x00
> +#define REDRIVER_ADDRESS	0x20
> +#define REDRIVER_OFFSET		0x00
> +
> +#define DP_SVID			0xFF01
> +#define VDM_ACK			0x40
> +#define VDM_CMD_RES		0x00
> +#define VDM_CMD_DIS_ID		0x01
> +#define VDM_CMD_DIS_SVID	0x02
> +#define VDM_CMD_DIS_MOD		0x03
> +#define VDM_CMD_ENTER_MODE	0x04
> +#define VDM_CMD_EXIT_MODE	0x05
> +#define VDM_CMD_ATTENTION	0x06
> +#define VDM_CMD_GET_STS		0x10
> +#define VDM_CMD_AND_ACK_MASK	0x5F
> +
> +#define MAX_ALTMODE		2
> +
> +#define HAS_SOURCE_CAP		BIT(0)
> +#define HAS_SINK_CAP		BIT(1)
> +#define HAS_SINK_WATT		BIT(2)
> +
> +enum anx7411_psy_state {
> +	/* copy from drivers/usb/typec/tcpm */
> +	ANX7411_PSY_OFFLINE = 0,
> +	ANX7411_PSY_FIXED_ONLINE,
> +
> +	/* private */
> +	/* PD keep in, but disconnct power to bq25700,
> +	 * this state can be active when higher capacity adapter plug in,
> +	 * and change to ONLINE state when higher capacity adapter plug out
> +	 */
> +	ANX7411_PSY_HANG = 0xff,
> +};
> +
> +struct typec_params {
> +	int request_current; /* ma */
> +	int request_voltage; /* mv */
> +	int cc_connect;
> +	int cc_orientation_valid;
> +	int cc_status;
> +	int data_role;
> +	int power_role;
> +	int vconn_role;
> +	int dp_altmode_enter;
> +	int cust_altmode_enter;
> +	struct usb_role_switch *role_sw;
> +	struct typec_port *port;
> +	struct typec_partner *partner;
> +	struct typec_mux *typec_mux;
> +	struct typec_switch *typec_switch;
> +	struct typec_altmode *amode[MAX_ALTMODE];
> +	struct typec_altmode *port_amode[MAX_ALTMODE];
> +	struct typec_displayport_data data;
> +	int pin_assignment;
> +	struct typec_capability caps;
> +	u32 src_pdo[PDO_MAX_OBJECTS];
> +	u32 sink_pdo[PDO_MAX_OBJECTS];
> +	u8 caps_flags;
> +	u8 src_pdo_nr;
> +	u8 sink_pdo_nr;
> +	u8 sink_watt;
> +	u8 sink_voltage;
> +};
> +
> +struct anx7411_data {
> +	int fw_version;
> +	int fw_subversion;
> +	struct i2c_client *tcpc_client;
> +	struct i2c_client *spi_client;
> +	struct gpio_desc *intp_gpiod;
> +	struct fwnode_handle *connector_fwnode;
> +	struct typec_params typec;
> +	int intp_irq;
> +	struct work_struct work;
> +	struct workqueue_struct *workqueue;
> +	/* Lock for interrupt work queue */
> +	struct mutex lock;
> +
> +	enum anx7411_psy_state psy_online;
> +	enum power_supply_usb_type usb_type;
> +	struct power_supply *psy;
> +	struct power_supply_desc psy_desc;
> +	struct device *dev;
> +};
> +
> +#endif /* __ANX7411_H__ */
> -- 
> 2.25.1
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

Re: [PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Greg Kroah-Hartman]

On Thu, Jan 20, 2022 at 05:36:15PM +0800, Xin Ji wrote:
> Add driver for analogix ANX7411 USB Type-C DRP port controller.
> 
> Reported-by: kernel test robot <lkp@intel.com>

The test robot did not report this to ask for a new driver :(

Re: [PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Xin Ji]

On Thu, Jan 20, 2022 at 10:58:17AM +0100, Greg Kroah-Hartman wrote:
> On Thu, Jan 20, 2022 at 05:36:15PM +0800, Xin Ji wrote:
> > Add driver for analogix ANX7411 USB Type-C DRP port controller.
> > 
> > Reported-by: kernel test robot <lkp@intel.com>
> 
> The test robot did not report this to ask for a new driver :(
Hi Greg, test robot ask me to fix the compile warning issue,
https://patchwork.kernel.org/project/linux-usb/patch/20220119110141.1020452-2-xji@analogixsemi.com/
so I think need upstream v2 after fixed the issue. I'll remove the test
robot tag in the next serial.

BTW, your robot ask me to add more log at commit message, do I need
upstream v3 after do that?

Thanks,
Xin

Re: [PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Greg Kroah-Hartman]

On Thu, Jan 20, 2022 at 06:31:37PM +0800, Xin Ji wrote:
> On Thu, Jan 20, 2022 at 10:58:17AM +0100, Greg Kroah-Hartman wrote:
> > On Thu, Jan 20, 2022 at 05:36:15PM +0800, Xin Ji wrote:
> > > Add driver for analogix ANX7411 USB Type-C DRP port controller.
> > > 
> > > Reported-by: kernel test robot <lkp@intel.com>
> > 
> > The test robot did not report this to ask for a new driver :(
> Hi Greg, test robot ask me to fix the compile warning issue,
> https://patchwork.kernel.org/project/linux-usb/patch/20220119110141.1020452-2-xji@analogixsemi.com/
> so I think need upstream v2 after fixed the issue. I'll remove the test
> robot tag in the next serial.
> 
> BTW, your robot ask me to add more log at commit message, do I need
> upstream v3 after do that?

Of course, I can't take this as-is.

thanks,

greg k-h

Re: [PATCH v2 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

[Xin Ji]

On Thu, Jan 20, 2022 at 12:55:27PM +0100, Greg Kroah-Hartman wrote:
> On Thu, Jan 20, 2022 at 06:31:37PM +0800, Xin Ji wrote:
> > On Thu, Jan 20, 2022 at 10:58:17AM +0100, Greg Kroah-Hartman wrote:
> > > On Thu, Jan 20, 2022 at 05:36:15PM +0800, Xin Ji wrote:
> > > > Add driver for analogix ANX7411 USB Type-C DRP port controller.
> > > > 
> > > > Reported-by: kernel test robot <lkp@intel.com>
> > > 
> > > The test robot did not report this to ask for a new driver :(
> > Hi Greg, test robot ask me to fix the compile warning issue,
> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Flinux-usb%2Fpatch%2F20220119110141.1020452-2-xji%40analogixsemi.com%2F&amp;data=04%7C01%7Cxji%40analogixsemi.com%7Cd94f0560432b4f5af2d108d9dc0bc41d%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637782765372551598%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=zOtehvul8zxKJgFK3wk0rZtaDDfH41Gc1pADwQV5LkM%3D&amp;reserved=0
> > so I think need upstream v2 after fixed the issue. I'll remove the test
> > robot tag in the next serial.
> > 
> > BTW, your robot ask me to add more log at commit message, do I need
> > upstream v3 after do that?
> 
> Of course, I can't take this as-is.
Hi Greg k-h, OK, I'll updata v3.
Thanks,
Xin
> 
> thanks,
> 
> greg k-h