* [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device
@ 2022-02-26 10:19 Luca Weiss
2022-02-26 10:19 ` Luca Weiss
2022-03-04 23:11 ` [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Rob Herring
0 siblings, 2 replies; 4+ messages in thread
From: Luca Weiss @ 2022-02-26 10:19 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Rob Herring, Stephen Boyd, devicetree,
linux-kernel
Document the ASUS ZenWatch 2 ("sparrow") which is a smartwatch based on
Snapdragon 400 SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 370aab274cd1..788d0ff0b686 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -99,6 +99,7 @@ properties:
- items:
- enum:
+ - asus,sparrow
- lg,lenok
- const: qcom,apq8026
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: dts: qcom: Add support for ASUS ZenWatch 2
2022-02-26 10:19 [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Luca Weiss
@ 2022-02-26 10:19 ` Luca Weiss
2022-03-04 23:11 ` [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Rob Herring
1 sibling, 0 replies; 4+ messages in thread
From: Luca Weiss @ 2022-02-26 10:19 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss,
Arnd Bergmann, Olof Johansson, soc, Rob Herring, Andy Gross,
Bjorn Andersson, linux-arm-kernel, devicetree, linux-kernel
Add support for this smartwatch, based on Snapdragon 400 SoC.
Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Vibration motor
* Bluetooth
* Wifi
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Please note that this patch soft-depends on "Bluetooth: hci_bcm: add
BCM43430A0 & BCM43430A1" which I sent out yesterday.
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/qcom-apq8026-asus-sparrow.dts | 294 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8226.dtsi | 9 +
3 files changed, 304 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..4b2489580f7c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -967,6 +967,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
ox820-cloudengines-pogoplug-series-3.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8016-sbc.dtb \
+ qcom-apq8026-asus-sparrow.dtb \
qcom-apq8026-lg-lenok.dtb \
qcom-apq8060-dragonboard.dtb \
qcom-apq8064-cm-qs600.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 000000000000..ace8cea27949
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/ {
+ model = "ASUS ZenWatch 2";
+ compatible = "asus,sparrow", "qcom,apq8026";
+ chassis-type = "watch";
+ qcom,msm-id = <199 0x20000>;
+ qcom,board-id = <8 3005>;
+
+ reserved-memory {
+ sbl_region: sbl@2f00000 {
+ reg = <0x02f00000 0x100000>;
+ no-map;
+ };
+ external_image_region: external-image@3100000 {
+ reg = <0x3100000 0x200000>;
+ no-map;
+ };
+ peripheral_region: peripheral@3300000 {
+ reg = <0x3300000 0x600000>;
+ no-map;
+ };
+ adsp_region: adsp@3900000 {
+ reg = <0x3900000 0x1400000>;
+ no-map;
+ };
+ modem_region: modem@4d00000 {
+ reg = <0x4d00000 0x1b00000>;
+ no-map;
+ };
+ modem_efs_region: modem-efs@7f00000 {
+ reg = <0x7f00000 0x100000>;
+ no-map;
+ };
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_default_state>;
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart1_default_state>;
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_state>;
+
+ host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8226-regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+};
+
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ non-removable;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_hostwake_default_state>;
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <350000>;
+ qcom,fast-charge-safe-voltage = <4430000>;
+ qcom,fast-charge-high-threshold-voltage = <4400000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+ blsp1_uart1_default_state: blsp1-uart1-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ bluetooth_default_state: bluetooth-default-state {
+ pins = "gpio48", "gpio61";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_hostwake_default_state: wlan-hostwake-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_regulator_default_state: wlan-regulator-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb {
+ status = "okay";
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index dfeb47eb41a2..e24e53438b4d 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -153,6 +153,15 @@ sdhc_3: sdhci@f9864900 {
status = "disabled";
};
+ blsp1_uart1: serial@f991d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991d000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@f991f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991f000 0x1000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: dts: qcom: Add support for ASUS ZenWatch 2
@ 2022-02-26 10:19 ` Luca Weiss
0 siblings, 0 replies; 4+ messages in thread
From: Luca Weiss @ 2022-02-26 10:19 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss,
Arnd Bergmann, Olof Johansson, soc, Rob Herring, Andy Gross,
Bjorn Andersson, linux-arm-kernel, devicetree, linux-kernel
Add support for this smartwatch, based on Snapdragon 400 SoC.
Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Vibration motor
* Bluetooth
* Wifi
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Please note that this patch soft-depends on "Bluetooth: hci_bcm: add
BCM43430A0 & BCM43430A1" which I sent out yesterday.
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/qcom-apq8026-asus-sparrow.dts | 294 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8226.dtsi | 9 +
3 files changed, 304 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..4b2489580f7c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -967,6 +967,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
ox820-cloudengines-pogoplug-series-3.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8016-sbc.dtb \
+ qcom-apq8026-asus-sparrow.dtb \
qcom-apq8026-lg-lenok.dtb \
qcom-apq8060-dragonboard.dtb \
qcom-apq8064-cm-qs600.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 000000000000..ace8cea27949
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/ {
+ model = "ASUS ZenWatch 2";
+ compatible = "asus,sparrow", "qcom,apq8026";
+ chassis-type = "watch";
+ qcom,msm-id = <199 0x20000>;
+ qcom,board-id = <8 3005>;
+
+ reserved-memory {
+ sbl_region: sbl@2f00000 {
+ reg = <0x02f00000 0x100000>;
+ no-map;
+ };
+ external_image_region: external-image@3100000 {
+ reg = <0x3100000 0x200000>;
+ no-map;
+ };
+ peripheral_region: peripheral@3300000 {
+ reg = <0x3300000 0x600000>;
+ no-map;
+ };
+ adsp_region: adsp@3900000 {
+ reg = <0x3900000 0x1400000>;
+ no-map;
+ };
+ modem_region: modem@4d00000 {
+ reg = <0x4d00000 0x1b00000>;
+ no-map;
+ };
+ modem_efs_region: modem-efs@7f00000 {
+ reg = <0x7f00000 0x100000>;
+ no-map;
+ };
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_default_state>;
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart1_default_state>;
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_state>;
+
+ host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8226-regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+};
+
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ non-removable;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_hostwake_default_state>;
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <350000>;
+ qcom,fast-charge-safe-voltage = <4430000>;
+ qcom,fast-charge-high-threshold-voltage = <4400000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+ blsp1_uart1_default_state: blsp1-uart1-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ bluetooth_default_state: bluetooth-default-state {
+ pins = "gpio48", "gpio61";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_hostwake_default_state: wlan-hostwake-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_regulator_default_state: wlan-regulator-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb {
+ status = "okay";
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index dfeb47eb41a2..e24e53438b4d 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -153,6 +153,15 @@ sdhc_3: sdhci@f9864900 {
status = "disabled";
};
+ blsp1_uart1: serial@f991d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991d000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@f991f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991f000 0x1000>;
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device
2022-02-26 10:19 [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Luca Weiss
2022-02-26 10:19 ` Luca Weiss
@ 2022-03-04 23:11 ` Rob Herring
1 sibling, 0 replies; 4+ messages in thread
From: Rob Herring @ 2022-03-04 23:11 UTC (permalink / raw)
To: Luca Weiss
Cc: Rob Herring, linux-arm-msm, Bjorn Andersson, phone-devel,
Stephen Boyd, ~postmarketos/upstreaming, linux-kernel,
Andy Gross, devicetree
On Sat, 26 Feb 2022 11:19:38 +0100, Luca Weiss wrote:
> Document the ASUS ZenWatch 2 ("sparrow") which is a smartwatch based on
> Snapdragon 400 SoC.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-03-04 23:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-26 10:19 [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Luca Weiss
2022-02-26 10:19 ` [PATCH 2/2] ARM: dts: qcom: Add support for ASUS ZenWatch 2 Luca Weiss
2022-02-26 10:19 ` Luca Weiss
2022-03-04 23:11 ` [PATCH 1/2] dt-bindings: arm: qcom: Document asus,sparrow device Rob Herring
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.