[PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen]

The arm_smmu_mm_invalidate_range function is designed to be called
by mm core for Shared Virtual Addressing purpose between IOMMU and
CPU MMU. However, the ways of two subsystems defining their "end"
addresses are slightly different. IOMMU defines its "end" address
using the last address of an address range, while mm core defines
that using the following address of an address range:

	include/linux/mm_types.h:
		unsigned long vm_end;
		/* The first byte after our end address ...

This mismatch resulted in an incorrect calculation for size so it
failed to be page-size aligned. Further, it caused a dead loop at
"while (iova < end)" check in __arm_smmu_tlb_inv_range function.

This patch fixes the issue by doing the calculation correctly.

Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
index 22ddd05bbdcd..c623dae1e115 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
 {
 	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
 	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
-	size_t size = end - start + 1;
+	size_t size;
+
+	/*
+	 * The mm_types defines vm_end as the first byte after the end address,
+	 * different from IOMMU subsystem using the last address of an address
+	 * range. So do a simple translation here by calculating size correctly.
+	 */
+	size = end - start;
 
 	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
 		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
-- 
2.17.1

[PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen via iommu]

The arm_smmu_mm_invalidate_range function is designed to be called
by mm core for Shared Virtual Addressing purpose between IOMMU and
CPU MMU. However, the ways of two subsystems defining their "end"
addresses are slightly different. IOMMU defines its "end" address
using the last address of an address range, while mm core defines
that using the following address of an address range:

	include/linux/mm_types.h:
		unsigned long vm_end;
		/* The first byte after our end address ...

This mismatch resulted in an incorrect calculation for size so it
failed to be page-size aligned. Further, it caused a dead loop at
"while (iova < end)" check in __arm_smmu_tlb_inv_range function.

This patch fixes the issue by doing the calculation correctly.

Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
index 22ddd05bbdcd..c623dae1e115 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
 {
 	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
 	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
-	size_t size = end - start + 1;
+	size_t size;
+
+	/*
+	 * The mm_types defines vm_end as the first byte after the end address,
+	 * different from IOMMU subsystem using the last address of an address
+	 * range. So do a simple translation here by calculating size correctly.
+	 */
+	size = end - start;
 
 	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
 		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen]

The arm_smmu_mm_invalidate_range function is designed to be called
by mm core for Shared Virtual Addressing purpose between IOMMU and
CPU MMU. However, the ways of two subsystems defining their "end"
addresses are slightly different. IOMMU defines its "end" address
using the last address of an address range, while mm core defines
that using the following address of an address range:

	include/linux/mm_types.h:
		unsigned long vm_end;
		/* The first byte after our end address ...

This mismatch resulted in an incorrect calculation for size so it
failed to be page-size aligned. Further, it caused a dead loop at
"while (iova < end)" check in __arm_smmu_tlb_inv_range function.

This patch fixes the issue by doing the calculation correctly.

Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
index 22ddd05bbdcd..c623dae1e115 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
 {
 	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
 	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
-	size_t size = end - start + 1;
+	size_t size;
+
+	/*
+	 * The mm_types defines vm_end as the first byte after the end address,
+	 * different from IOMMU subsystem using the last address of an address
+	 * range. So do a simple translation here by calculating size correctly.
+	 */
+	size = end - start;
 
 	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
 		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Robin Murphy]

On 2022-04-19 22:01, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>   {
>   	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>   	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>   
>   	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>   		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Robin Murphy]

On 2022-04-19 22:01, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>   {
>   	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>   	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>   
>   	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>   		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Robin Murphy]

On 2022-04-19 22:01, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>   {
>   	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>   	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>   
>   	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>   		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jason Gunthorpe]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>

> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;

I would skip the comment though

Jason

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jason Gunthorpe]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>

> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;

I would skip the comment though

Jason
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jason Gunthorpe]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>

> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;

I would skip the comment though

Jason

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen]

On Tue, Apr 19, 2022 at 08:10:34PM -0300, Jason Gunthorpe wrote:

> > -     size_t size = end - start + 1;
> > +     size_t size;
> > +
> > +     /*
> > +      * The mm_types defines vm_end as the first byte after the end address,
> > +      * different from IOMMU subsystem using the last address of an address
> > +      * range. So do a simple translation here by calculating size correctly.
> > +      */
> > +     size = end - start;
> 
> I would skip the comment though

It's a bit of highlight here to help us remember in the future,
per Robin's comments at my previous patch.

Thanks!
Nic

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen via iommu]

On Tue, Apr 19, 2022 at 08:10:34PM -0300, Jason Gunthorpe wrote:

> > -     size_t size = end - start + 1;
> > +     size_t size;
> > +
> > +     /*
> > +      * The mm_types defines vm_end as the first byte after the end address,
> > +      * different from IOMMU subsystem using the last address of an address
> > +      * range. So do a simple translation here by calculating size correctly.
> > +      */
> > +     size = end - start;
> 
> I would skip the comment though

It's a bit of highlight here to help us remember in the future,
per Robin's comments at my previous patch.

Thanks!
Nic
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Nicolin Chen]

On Tue, Apr 19, 2022 at 08:10:34PM -0300, Jason Gunthorpe wrote:

> > -     size_t size = end - start + 1;
> > +     size_t size;
> > +
> > +     /*
> > +      * The mm_types defines vm_end as the first byte after the end address,
> > +      * different from IOMMU subsystem using the last address of an address
> > +      * range. So do a simple translation here by calculating size correctly.
> > +      */
> > +     size = end - start;
> 
> I would skip the comment though

It's a bit of highlight here to help us remember in the future,
per Robin's comments at my previous patch.

Thanks!
Nic

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jean-Philippe Brucker]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>

Thanks for the fix, I guess we didn't catch this earlier because our test
platforms didn't support range invalidation, so __arm_smmu_tlb_inv_range()
would always use PAGE_SIZE as increment.

Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>  {
>  	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>  	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>  
>  	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>  		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
> -- 
> 2.17.1
> 

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jean-Philippe Brucker]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>

Thanks for the fix, I guess we didn't catch this earlier because our test
platforms didn't support range invalidation, so __arm_smmu_tlb_inv_range()
would always use PAGE_SIZE as increment.

Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>  {
>  	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>  	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>  
>  	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>  		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
> -- 
> 2.17.1
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Jean-Philippe Brucker]

On Tue, Apr 19, 2022 at 02:01:58PM -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.
> 
> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>

Thanks for the fix, I guess we didn't catch this earlier because our test
platforms didn't support range invalidation, so __arm_smmu_tlb_inv_range()
would always use PAGE_SIZE as increment.

Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>  {
>  	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>  	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>  
>  	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>  		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Will Deacon]

On Tue, 19 Apr 2022 14:01:58 -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> [...]

Applied to will (for-joerg/arm-smmu/fixes), thanks!

[1/1] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
      https://git.kernel.org/will/c/95d4782c34a6

Cheers,
-- 
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Will Deacon]

On Tue, 19 Apr 2022 14:01:58 -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> [...]

Applied to will (for-joerg/arm-smmu/fixes), thanks!

[1/1] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
      https://git.kernel.org/will/c/95d4782c34a6

Cheers,
-- 
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Will Deacon]

On Tue, 19 Apr 2022 14:01:58 -0700, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> [...]

Applied to will (for-joerg/arm-smmu/fixes), thanks!

[1/1] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
      https://git.kernel.org/will/c/95d4782c34a6

Cheers,
-- 
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel