FAILED: patch "[PATCH] xhci: increase usb U3 -> U0 link resume timeout from 100ms to" failed to apply to 5.4-stable tree

FAILED: patch "[PATCH] xhci: increase usb U3 -> U0 link resume timeout from 100ms to" failed to apply to 5.4-stable tree

[gregkh]

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 33597f0c48be0836854d43c577e35c8f8a765a7d Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Fri, 8 Apr 2022 16:48:23 +0300
Subject: [PATCH] xhci: increase usb U3 -> U0 link resume timeout from 100ms to
 500ms

The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.

Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.

Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1e7dc130c39a..f65f1ba2b592 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1434,7 +1434,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				}
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
-								 msecs_to_jiffies(100)))
+								 msecs_to_jiffies(500)))
 					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
 						 hcd->self.busnum, wIndex + 1);
 				spin_lock_irqsave(&xhci->lock, flags);

Re: FAILED: patch "[PATCH] xhci: increase usb U3 -> U0 link resume timeout from 100ms to" failed to apply to 5.4-stable tree

[Greg KH]

On Sun, May 01, 2022 at 05:52:04PM +0200, gregkh@linuxfoundation.org wrote:
> 
> The patch below does not apply to the 5.4-stable tree.
> If someone wants it applied there, or to any other stable or longterm
> tree, then please email the backport, including the original git commit
> id to <stable@vger.kernel.org>.

Nevermind, I fixed this up, sorry for the noise.

greg k-h