[PATCH v3 0/3] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies

[PATCH v3 0/3] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies

[Krzysztof Kozlowski]

Hi,

Extend the RPMH regulator bindings with minor fixes and adding narrow supply
matching.

Changes since v2
================
1. Remove "defs" method, because schema nows allows unevaluatedProperties
   without references to other schemas.
2. Include maintainer change patch, previously sent separately.

Changes since v1
================
1. Use "defs" method instead of referencing additional YAML file, because the
   latter was not working properly.

Best regards,
Krzysztof

Krzysztof Kozlowski (3):
  regulator: dt-bindings: qcom,rpmh: update maintainers
  regulator: dt-bindings: qcom,rpmh: document supplies per variant
  regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on
    PMR735A

 .../regulator/qcom,rpmh-regulator.yaml        | 260 +++++++++++++++++-
 1 file changed, 245 insertions(+), 15 deletions(-)

-- 
2.32.0

[PATCH v3 1/3] regulator: dt-bindings: qcom,rpmh: update maintainers

[Krzysztof Kozlowski]

David Collins' email bounces ("Recipient address rejected: undeliverable
address: No such user here").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml     | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 2714a790ff83..842ccef691b8 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. RPMh Regulators
 
 maintainers:
-  - David Collins <collinsd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 
 description: |
     rpmh-regulator devices support PMIC regulator management via the Voltage
-- 
2.32.0

[PATCH v3 2/3] regulator: dt-bindings: qcom,rpmh: document supplies per variant

[Krzysztof Kozlowski]

The RPMH regulator binding covers several devices with different
regulator supplies, so it uses patterns matching broad range of these
supplies.  This works fine but is not specific and might miss actual
mistakes when a wrong supply property is used for given variant.

Describe the supplies depending on the compatible, using a defs-allOf
method.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../regulator/qcom,rpmh-regulator.yaml        | 256 +++++++++++++++++-
 1 file changed, 242 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 842ccef691b8..6b99897fa404 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -95,35 +95,263 @@ properties:
   vdd-rgb-supply:
     description: Input supply phandle of rgb.
 
-  vin-lvs-1-2-supply:
-    description: Input supply phandle of one or more regulators.
-
-  vdd-bob-supply:
-    description: BOB regulator parent supply phandle.
-
   bob:
     type: object
     $ref: "regulator.yaml#"
     description: BOB regulator node.
 
 patternProperties:
-  "^vdd-s([0-9]+)-supply$":
-    description: Input supply phandle(s) of one or more regulators.
-
-  "^vdd-(l[0-9]+[-]){1,5}supply$":
-    description: Input supply phandle(s) of one or more regulators.
-
   "^(smps|ldo|lvs)[0-9]+$":
     type: object
     $ref: "regulator.yaml#"
     description: smps/ldo regulator nodes(s).
 
-additionalProperties: false
-
 required:
   - compatible
   - qcom,pmic-id
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l3-supply: true
+        vdd-l4-l7-l8-supply: true
+        vdd-l5-l16-l17-l18-l19-supply: true
+        vdd-l10-l14-l15-supply: true
+        vdd-l11-l12-l13-supply: true
+      patternProperties:
+        "^vdd-l[169]-supply$": true
+        "^vdd-s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm7325-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-l12-l15-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l11-l17-l18-l19-supply: true
+        vdd-l13-supply: true
+        vdd-l14-l16-supply: true
+      patternProperties:
+        "^vdd-l[358]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8005-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8009-rpmh-regulators
+            - qcom,pm8009-1-rpmh-regulators
+    then:
+      properties:
+        vdd-l5-l6-supply: true
+      patternProperties:
+        "^vdd-l[1-47]-supply$": true
+        "^vdd-s[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150-rpmh-regulators
+            - qcom,pmm8155au-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l8-l11-supply: true
+        vdd-l2-l10-supply: true
+        vdd-l3-l4-l5-l18-supply: true
+        vdd-l6-l9-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l13-l16-l17-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l3-l5-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l8-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-2])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350c-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l12-supply: true
+        vdd-l2-l8-supply: true
+        vdd-l3-l4-l5-l7-l13-supply: true
+        vdd-l6-l9-l11-supply: true
+        vdd-l10-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8450-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-4]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8998-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l27-supply: true
+        vdd-l2-l8-l17-supply: true
+        vdd-l3-l11-supply: true
+        vdd-l4-l5-supply: true
+        vdd-l6-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l9-supply: true
+        vdd-l10-l23-l25-supply: true
+        vdd-l13-l19-l21-supply: true
+        vdd-l16-l28-supply: true
+        vdd-l18-l22-supply: true
+        vdd-l20-l24-supply: true
+        vdd-l26-supply: true
+        vin-lvs-1-2-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-3])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmg1110-rpmh-regulators
+    then:
+      properties:
+        vdd-s1-supply: true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmi8998-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmr735a-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-supply: true
+        vdd-l4-supply: true
+        vdd-l5-l6-supply: true
+      patternProperties:
+        "^vdd-s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx55-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l9-supply: true
+        vdd-l4-l12-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-l8-supply: true
+        vdd-l10-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l1[4-6]-supply$": true
+        "^vdd-s[1-7]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx65-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l5-l6-l16-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l[1347]-supply$": true
+        "^vdd-l1[0245789]-supply$": true
+        "^vdd-l2[01]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-- 
2.32.0

[PATCH v3 3/3] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A

[Krzysztof Kozlowski]

The PMR735A comes with vdd-l7-bob-supply supply which was previously not
documented.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 6b99897fa404..9a36bee750af 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -313,6 +313,7 @@ allOf:
         vdd-l3-supply: true
         vdd-l4-supply: true
         vdd-l5-l6-supply: true
+        vdd-l7-bob-supply: true
       patternProperties:
         "^vdd-s[1-3]-supply$": true
 
-- 
2.32.0

Re: [PATCH v3 2/3] regulator: dt-bindings: qcom,rpmh: document supplies per variant

[Rob Herring]

On Tue, 26 Apr 2022 12:55:00 +0200, Krzysztof Kozlowski wrote:
> The RPMH regulator binding covers several devices with different
> regulator supplies, so it uses patterns matching broad range of these
> supplies.  This works fine but is not specific and might miss actual
> mistakes when a wrong supply property is used for given variant.
> 
> Describe the supplies depending on the compatible, using a defs-allOf
> method.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../regulator/qcom,rpmh-regulator.yaml        | 256 +++++++++++++++++-
>  1 file changed, 242 insertions(+), 14 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 3/3] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A

[Rob Herring]

On Tue, 26 Apr 2022 12:55:01 +0200, Krzysztof Kozlowski wrote:
> The PMR735A comes with vdd-l7-bob-supply supply which was previously not
> documented.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml       | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 1/3] regulator: dt-bindings: qcom,rpmh: update maintainers

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 275 bytes --]

On Tue, Apr 26, 2022 at 12:54:59PM +0200, Krzysztof Kozlowski wrote:

>  maintainers:
> -  - David Collins <collinsd@codeaurora.org>
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Bjorn, are you OK with this?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v3 1/3] regulator: dt-bindings: qcom,rpmh: update maintainers

[Bjorn Andersson]

On Wed 27 Apr 06:41 PDT 2022, Mark Brown wrote:

> On Tue, Apr 26, 2022 at 12:54:59PM +0200, Krzysztof Kozlowski wrote:
> 
> >  maintainers:
> > -  - David Collins <collinsd@codeaurora.org>
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Bjorn, are you OK with this?

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Re: [PATCH v3 0/3] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies

[Mark Brown]

On Tue, 26 Apr 2022 12:54:58 +0200, Krzysztof Kozlowski wrote:
> Extend the RPMH regulator bindings with minor fixes and adding narrow supply
> matching.
> 
> Changes since v2
> ================
> 1. Remove "defs" method, because schema nows allows unevaluatedProperties
>    without references to other schemas.
> 2. Include maintainer change patch, previously sent separately.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/3] regulator: dt-bindings: qcom,rpmh: update maintainers
      commit: a6d889a8fdbb8cb4b0d01f30f93357f3ffd61f06
[2/3] regulator: dt-bindings: qcom,rpmh: document supplies per variant
      commit: ba5d99609a5e6a3d0d9ac2574250208457d839cc
[3/3] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A
      commit: e84f3c41a583408c7c67ed7824a7ff14ff40d045

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark