* [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
@ 2022-04-03 6:33 ` Miaoqian Lin
0 siblings, 0 replies; 10+ messages in thread
From: Miaoqian Lin @ 2022-04-03 6:33 UTC (permalink / raw)
To: Florian Fainelli, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Nicolas Saenz Julienne, Wolfram Sang,
Stefan Wahren, Miaoqian Lin, Eric Anholt, Lad Prabhakar,
Annaliese McDermond, linux-i2c, linux-rpi-kernel,
linux-arm-kernel, linux-kernel
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(),
it should be balanced with call to clk_rate_exclusive_put().
, as already done in the remove function.
Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
---
drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5149454eef4a..d794448866a7 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
ret = clk_prepare_enable(i2c_dev->bus_clk);
if (ret) {
dev_err(&pdev->dev, "Couldn't prepare clock");
- return ret;
+ goto err_put_clk;
}
i2c_dev->irq = platform_get_irq(pdev, 0);
- if (i2c_dev->irq < 0)
- return i2c_dev->irq;
+ if (i2c_dev->irq < 0) {
+ ret = i2c_dev->irq;
+ goto err_disable_clk;
+ }
ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Could not request IRQ\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_disable_clk;
}
adap = &i2c_dev->adapter;
@@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(adap);
if (ret)
- free_irq(i2c_dev->irq, i2c_dev);
+ goto err_free_irq;
+
+ return ret;
+err_free_irq:
+ free_irq(i2c_dev->irq, i2c_dev);
+err_disable_clk:
+ clk_disable_unprepare(i2c_dev->bus_clk);
+err_put_clk:
+ clk_rate_exclusive_put(i2c_dev->bus_clk);
return ret;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe @ 2022-04-03 6:33 ` Miaoqian Lin 0 siblings, 0 replies; 10+ messages in thread From: Miaoqian Lin @ 2022-04-03 6:33 UTC (permalink / raw) To: Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Wolfram Sang, Stefan Wahren, Miaoqian Lin, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), it should be balanced with call to clk_rate_exclusive_put(). , as already done in the remove function. Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> --- drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 5149454eef4a..d794448866a7 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = clk_prepare_enable(i2c_dev->bus_clk); if (ret) { dev_err(&pdev->dev, "Couldn't prepare clock"); - return ret; + goto err_put_clk; } i2c_dev->irq = platform_get_irq(pdev, 0); - if (i2c_dev->irq < 0) - return i2c_dev->irq; + if (i2c_dev->irq < 0) { + ret = i2c_dev->irq; + goto err_disable_clk; + } ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Could not request IRQ\n"); - return -ENODEV; + ret = -ENODEV; + goto err_disable_clk; } adap = &i2c_dev->adapter; @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(adap); if (ret) - free_irq(i2c_dev->irq, i2c_dev); + goto err_free_irq; + + return ret; +err_free_irq: + free_irq(i2c_dev->irq, i2c_dev); +err_disable_clk: + clk_disable_unprepare(i2c_dev->bus_clk); +err_put_clk: + clk_rate_exclusive_put(i2c_dev->bus_clk); return ret; } -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe 2022-04-03 6:33 ` Miaoqian Lin @ 2022-05-21 11:46 ` Wolfram Sang -1 siblings, 0 replies; 10+ messages in thread From: Wolfram Sang @ 2022-05-21 11:46 UTC (permalink / raw) To: Miaoqian Lin Cc: Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2091 bytes --] On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: > In the error handling path, the clk_prepare_enable() function > call should be balanced by a corresponding 'clk_disable_unprepare()' > call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), > it should be balanced with call to clk_rate_exclusive_put(). > , as already done in the remove function. > > Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") > Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Looking for a reviewer here, pretty please? > --- > drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- > 1 file changed, 16 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c > index 5149454eef4a..d794448866a7 100644 > --- a/drivers/i2c/busses/i2c-bcm2835.c > +++ b/drivers/i2c/busses/i2c-bcm2835.c > @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) > ret = clk_prepare_enable(i2c_dev->bus_clk); > if (ret) { > dev_err(&pdev->dev, "Couldn't prepare clock"); > - return ret; > + goto err_put_clk; > } > > i2c_dev->irq = platform_get_irq(pdev, 0); > - if (i2c_dev->irq < 0) > - return i2c_dev->irq; > + if (i2c_dev->irq < 0) { > + ret = i2c_dev->irq; > + goto err_disable_clk; > + } > > ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, > dev_name(&pdev->dev), i2c_dev); > if (ret) { > dev_err(&pdev->dev, "Could not request IRQ\n"); > - return -ENODEV; > + ret = -ENODEV; > + goto err_disable_clk; > } > > adap = &i2c_dev->adapter; > @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) > > ret = i2c_add_adapter(adap); > if (ret) > - free_irq(i2c_dev->irq, i2c_dev); > + goto err_free_irq; > + > + return ret; > > +err_free_irq: > + free_irq(i2c_dev->irq, i2c_dev); > +err_disable_clk: > + clk_disable_unprepare(i2c_dev->bus_clk); > +err_put_clk: > + clk_rate_exclusive_put(i2c_dev->bus_clk); > return ret; > } > > -- > 2.17.1 > [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe @ 2022-05-21 11:46 ` Wolfram Sang 0 siblings, 0 replies; 10+ messages in thread From: Wolfram Sang @ 2022-05-21 11:46 UTC (permalink / raw) To: Miaoqian Lin Cc: Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1.1: Type: text/plain, Size: 2091 bytes --] On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: > In the error handling path, the clk_prepare_enable() function > call should be balanced by a corresponding 'clk_disable_unprepare()' > call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), > it should be balanced with call to clk_rate_exclusive_put(). > , as already done in the remove function. > > Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") > Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Looking for a reviewer here, pretty please? > --- > drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- > 1 file changed, 16 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c > index 5149454eef4a..d794448866a7 100644 > --- a/drivers/i2c/busses/i2c-bcm2835.c > +++ b/drivers/i2c/busses/i2c-bcm2835.c > @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) > ret = clk_prepare_enable(i2c_dev->bus_clk); > if (ret) { > dev_err(&pdev->dev, "Couldn't prepare clock"); > - return ret; > + goto err_put_clk; > } > > i2c_dev->irq = platform_get_irq(pdev, 0); > - if (i2c_dev->irq < 0) > - return i2c_dev->irq; > + if (i2c_dev->irq < 0) { > + ret = i2c_dev->irq; > + goto err_disable_clk; > + } > > ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, > dev_name(&pdev->dev), i2c_dev); > if (ret) { > dev_err(&pdev->dev, "Could not request IRQ\n"); > - return -ENODEV; > + ret = -ENODEV; > + goto err_disable_clk; > } > > adap = &i2c_dev->adapter; > @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) > > ret = i2c_add_adapter(adap); > if (ret) > - free_irq(i2c_dev->irq, i2c_dev); > + goto err_free_irq; > + > + return ret; > > +err_free_irq: > + free_irq(i2c_dev->irq, i2c_dev); > +err_disable_clk: > + clk_disable_unprepare(i2c_dev->bus_clk); > +err_put_clk: > + clk_rate_exclusive_put(i2c_dev->bus_clk); > return ret; > } > > -- > 2.17.1 > [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe 2022-05-21 11:46 ` Wolfram Sang @ 2022-05-21 12:28 ` Christophe JAILLET -1 siblings, 0 replies; 10+ messages in thread From: Christophe JAILLET @ 2022-05-21 12:28 UTC (permalink / raw) To: Wolfram Sang, Miaoqian Lin, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel Le 21/05/2022 à 13:46, Wolfram Sang a écrit : > On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: >> In the error handling path, the clk_prepare_enable() function >> call should be balanced by a corresponding 'clk_disable_unprepare()' >> call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), >> it should be balanced with call to clk_rate_exclusive_put(). >> , as already done in the remove function. >> >> Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") >> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> > > Looking for a reviewer here, pretty please? Hi, on which tree are you working? A similar patch is already available in -next since several months. (see [1]) CJ [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/i2c/busses/i2c-bcm2835.c?id=b205f5850263632b6897d8f0bfaeeea4955f8663 > >> --- >> drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- >> 1 file changed, 16 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c >> index 5149454eef4a..d794448866a7 100644 >> --- a/drivers/i2c/busses/i2c-bcm2835.c >> +++ b/drivers/i2c/busses/i2c-bcm2835.c >> @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >> ret = clk_prepare_enable(i2c_dev->bus_clk); >> if (ret) { >> dev_err(&pdev->dev, "Couldn't prepare clock"); >> - return ret; >> + goto err_put_clk; >> } >> >> i2c_dev->irq = platform_get_irq(pdev, 0); >> - if (i2c_dev->irq < 0) >> - return i2c_dev->irq; >> + if (i2c_dev->irq < 0) { >> + ret = i2c_dev->irq; >> + goto err_disable_clk; >> + } >> >> ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, >> dev_name(&pdev->dev), i2c_dev); >> if (ret) { >> dev_err(&pdev->dev, "Could not request IRQ\n"); >> - return -ENODEV; >> + ret = -ENODEV; >> + goto err_disable_clk; >> } >> >> adap = &i2c_dev->adapter; >> @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >> >> ret = i2c_add_adapter(adap); >> if (ret) >> - free_irq(i2c_dev->irq, i2c_dev); >> + goto err_free_irq; >> + >> + return ret; >> >> +err_free_irq: >> + free_irq(i2c_dev->irq, i2c_dev); >> +err_disable_clk: >> + clk_disable_unprepare(i2c_dev->bus_clk); >> +err_put_clk: >> + clk_rate_exclusive_put(i2c_dev->bus_clk); >> return ret; >> } >> >> -- >> 2.17.1 >> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe @ 2022-05-21 12:28 ` Christophe JAILLET 0 siblings, 0 replies; 10+ messages in thread From: Christophe JAILLET @ 2022-05-21 12:28 UTC (permalink / raw) To: Wolfram Sang, Miaoqian Lin, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel Le 21/05/2022 à 13:46, Wolfram Sang a écrit : > On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: >> In the error handling path, the clk_prepare_enable() function >> call should be balanced by a corresponding 'clk_disable_unprepare()' >> call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), >> it should be balanced with call to clk_rate_exclusive_put(). >> , as already done in the remove function. >> >> Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") >> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> > > Looking for a reviewer here, pretty please? Hi, on which tree are you working? A similar patch is already available in -next since several months. (see [1]) CJ [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/i2c/busses/i2c-bcm2835.c?id=b205f5850263632b6897d8f0bfaeeea4955f8663 > >> --- >> drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- >> 1 file changed, 16 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c >> index 5149454eef4a..d794448866a7 100644 >> --- a/drivers/i2c/busses/i2c-bcm2835.c >> +++ b/drivers/i2c/busses/i2c-bcm2835.c >> @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >> ret = clk_prepare_enable(i2c_dev->bus_clk); >> if (ret) { >> dev_err(&pdev->dev, "Couldn't prepare clock"); >> - return ret; >> + goto err_put_clk; >> } >> >> i2c_dev->irq = platform_get_irq(pdev, 0); >> - if (i2c_dev->irq < 0) >> - return i2c_dev->irq; >> + if (i2c_dev->irq < 0) { >> + ret = i2c_dev->irq; >> + goto err_disable_clk; >> + } >> >> ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, >> dev_name(&pdev->dev), i2c_dev); >> if (ret) { >> dev_err(&pdev->dev, "Could not request IRQ\n"); >> - return -ENODEV; >> + ret = -ENODEV; >> + goto err_disable_clk; >> } >> >> adap = &i2c_dev->adapter; >> @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >> >> ret = i2c_add_adapter(adap); >> if (ret) >> - free_irq(i2c_dev->irq, i2c_dev); >> + goto err_free_irq; >> + >> + return ret; >> >> +err_free_irq: >> + free_irq(i2c_dev->irq, i2c_dev); >> +err_disable_clk: >> + clk_disable_unprepare(i2c_dev->bus_clk); >> +err_put_clk: >> + clk_rate_exclusive_put(i2c_dev->bus_clk); >> return ret; >> } >> >> -- >> 2.17.1 >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe 2022-05-21 12:28 ` Christophe JAILLET @ 2022-05-21 13:56 ` Miaoqian Lin -1 siblings, 0 replies; 10+ messages in thread From: Miaoqian Lin @ 2022-05-21 13:56 UTC (permalink / raw) To: Christophe JAILLET, Wolfram Sang, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel On 2022/5/21 20:28, Christophe JAILLET wrote: > Le 21/05/2022 à 13:46, Wolfram Sang a écrit : >> On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: >>> In the error handling path, the clk_prepare_enable() function >>> call should be balanced by a corresponding 'clk_disable_unprepare()' >>> call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), >>> it should be balanced with call to clk_rate_exclusive_put(). >>> , as already done in the remove function. >>> >>> Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") >>> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> >> >> Looking for a reviewer here, pretty please? > > Hi, > > on which tree are you working? > A similar patch is already available in -next since several months. (see [1]) > Hi, I mainly work on master, sorry I didn't notice it when submitted. I may make a mistake with synchronize, thanks for your reply. > CJ > > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/i2c/busses/i2c-bcm2835.c?id=b205f5850263632b6897d8f0bfaeeea4955f8663 >> >>> --- >>> drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- >>> 1 file changed, 16 insertions(+), 5 deletions(-) >>> >>> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c >>> index 5149454eef4a..d794448866a7 100644 >>> --- a/drivers/i2c/busses/i2c-bcm2835.c >>> +++ b/drivers/i2c/busses/i2c-bcm2835.c >>> @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >>> ret = clk_prepare_enable(i2c_dev->bus_clk); >>> if (ret) { >>> dev_err(&pdev->dev, "Couldn't prepare clock"); >>> - return ret; >>> + goto err_put_clk; >>> } >>> i2c_dev->irq = platform_get_irq(pdev, 0); >>> - if (i2c_dev->irq < 0) >>> - return i2c_dev->irq; >>> + if (i2c_dev->irq < 0) { >>> + ret = i2c_dev->irq; >>> + goto err_disable_clk; >>> + } >>> ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, >>> dev_name(&pdev->dev), i2c_dev); >>> if (ret) { >>> dev_err(&pdev->dev, "Could not request IRQ\n"); >>> - return -ENODEV; >>> + ret = -ENODEV; >>> + goto err_disable_clk; >>> } >>> adap = &i2c_dev->adapter; >>> @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >>> ret = i2c_add_adapter(adap); >>> if (ret) >>> - free_irq(i2c_dev->irq, i2c_dev); >>> + goto err_free_irq; >>> + >>> + return ret; >>> +err_free_irq: >>> + free_irq(i2c_dev->irq, i2c_dev); >>> +err_disable_clk: >>> + clk_disable_unprepare(i2c_dev->bus_clk); >>> +err_put_clk: >>> + clk_rate_exclusive_put(i2c_dev->bus_clk); >>> return ret; >>> } >>> -- >>> 2.17.1 >>> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe @ 2022-05-21 13:56 ` Miaoqian Lin 0 siblings, 0 replies; 10+ messages in thread From: Miaoqian Lin @ 2022-05-21 13:56 UTC (permalink / raw) To: Christophe JAILLET, Wolfram Sang, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel On 2022/5/21 20:28, Christophe JAILLET wrote: > Le 21/05/2022 à 13:46, Wolfram Sang a écrit : >> On Sun, Apr 03, 2022 at 06:33:08AM +0000, Miaoqian Lin wrote: >>> In the error handling path, the clk_prepare_enable() function >>> call should be balanced by a corresponding 'clk_disable_unprepare()' >>> call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(), >>> it should be balanced with call to clk_rate_exclusive_put(). >>> , as already done in the remove function. >>> >>> Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") >>> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> >> >> Looking for a reviewer here, pretty please? > > Hi, > > on which tree are you working? > A similar patch is already available in -next since several months. (see [1]) > Hi, I mainly work on master, sorry I didn't notice it when submitted. I may make a mistake with synchronize, thanks for your reply. > CJ > > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/i2c/busses/i2c-bcm2835.c?id=b205f5850263632b6897d8f0bfaeeea4955f8663 >> >>> --- >>> drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++----- >>> 1 file changed, 16 insertions(+), 5 deletions(-) >>> >>> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c >>> index 5149454eef4a..d794448866a7 100644 >>> --- a/drivers/i2c/busses/i2c-bcm2835.c >>> +++ b/drivers/i2c/busses/i2c-bcm2835.c >>> @@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >>> ret = clk_prepare_enable(i2c_dev->bus_clk); >>> if (ret) { >>> dev_err(&pdev->dev, "Couldn't prepare clock"); >>> - return ret; >>> + goto err_put_clk; >>> } >>> i2c_dev->irq = platform_get_irq(pdev, 0); >>> - if (i2c_dev->irq < 0) >>> - return i2c_dev->irq; >>> + if (i2c_dev->irq < 0) { >>> + ret = i2c_dev->irq; >>> + goto err_disable_clk; >>> + } >>> ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, >>> dev_name(&pdev->dev), i2c_dev); >>> if (ret) { >>> dev_err(&pdev->dev, "Could not request IRQ\n"); >>> - return -ENODEV; >>> + ret = -ENODEV; >>> + goto err_disable_clk; >>> } >>> adap = &i2c_dev->adapter; >>> @@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) >>> ret = i2c_add_adapter(adap); >>> if (ret) >>> - free_irq(i2c_dev->irq, i2c_dev); >>> + goto err_free_irq; >>> + >>> + return ret; >>> +err_free_irq: >>> + free_irq(i2c_dev->irq, i2c_dev); >>> +err_disable_clk: >>> + clk_disable_unprepare(i2c_dev->bus_clk); >>> +err_put_clk: >>> + clk_rate_exclusive_put(i2c_dev->bus_clk); >>> return ret; >>> } >>> -- >>> 2.17.1 >>> > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe 2022-05-21 12:28 ` Christophe JAILLET @ 2022-05-22 21:01 ` Wolfram Sang -1 siblings, 0 replies; 10+ messages in thread From: Wolfram Sang @ 2022-05-22 21:01 UTC (permalink / raw) To: Christophe JAILLET Cc: Miaoqian Lin, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 61 bytes --] > on which tree are you working? Thanks for the heads up! [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe @ 2022-05-22 21:01 ` Wolfram Sang 0 siblings, 0 replies; 10+ messages in thread From: Wolfram Sang @ 2022-05-22 21:01 UTC (permalink / raw) To: Christophe JAILLET Cc: Miaoqian Lin, Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list, Nicolas Saenz Julienne, Stefan Wahren, Eric Anholt, Lad Prabhakar, Annaliese McDermond, linux-i2c, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1.1: Type: text/plain, Size: 61 bytes --] > on which tree are you working? Thanks for the heads up! [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-05-23 8:40 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-04-03 6:33 [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe Miaoqian Lin 2022-04-03 6:33 ` Miaoqian Lin 2022-05-21 11:46 ` Wolfram Sang 2022-05-21 11:46 ` Wolfram Sang 2022-05-21 12:28 ` Christophe JAILLET 2022-05-21 12:28 ` Christophe JAILLET 2022-05-21 13:56 ` Miaoqian Lin 2022-05-21 13:56 ` Miaoqian Lin 2022-05-22 21:01 ` Wolfram Sang 2022-05-22 21:01 ` Wolfram Sang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.