[PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Christoph Hellwig]

This was removed before due to the complete lack of users, but
3218910fd585 ("dmaengine: Add core function and capability check for
DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
DMA_MEMCPY_SG API function.") added it back despite still not having
any users whatsoever.

Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 .../driver-api/dmaengine/provider.rst         |  10 --
 drivers/dma/dmaengine.c                       |   7 -
 drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
 include/linux/dmaengine.h                     |  20 ---
 4 files changed, 159 deletions(-)

diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
index 1e0f1f85d10e5..ceac2a300e328 100644
--- a/Documentation/driver-api/dmaengine/provider.rst
+++ b/Documentation/driver-api/dmaengine/provider.rst
@@ -162,16 +162,6 @@ Currently, the types available are:
 
   - The device is able to do memory to memory copies
 
-- - DMA_MEMCPY_SG
-
-  - The device supports memory to memory scatter-gather transfers.
-
-  - Even though a plain memcpy can look like a particular case of a
-    scatter-gather transfer, with a single chunk to copy, it's a distinct
-    transaction type in the mem2mem transfer case. This is because some very
-    simple devices might be able to do contiguous single-chunk memory copies,
-    but have no support for more complex SG transfers.
-
   - No matter what the overall size of the combined chunks for source and
     destination is, only as many bytes as the smallest of the two will be
     transmitted. That means the number and size of the scatter-gather buffers in
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index e80feeea0e018..c741b6431958c 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
 		return -EIO;
 	}
 
-	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
-		dev_err(device->dev,
-			"Device claims capability %s, but op is not defined\n",
-			"DMA_MEMCPY_SG");
-		return -EIO;
-	}
-
 	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
 		dev_err(device->dev,
 			"Device claims capability %s, but op is not defined\n",
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cd62bbb50e8b4..6276934d4d2be 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
 	return NULL;
 }
 
-/**
- * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
- * @dchan: DMA channel
- * @dst_sg: Destination scatter list
- * @dst_sg_len: Number of entries in destination scatter list
- * @src_sg: Source scatter list
- * @src_sg_len: Number of entries in source scatter list
- * @flags: transfer ack flags
- *
- * Return: Async transaction descriptor on success and NULL on failure
- */
-static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
-			struct dma_chan *dchan, struct scatterlist *dst_sg,
-			unsigned int dst_sg_len, struct scatterlist *src_sg,
-			unsigned int src_sg_len, unsigned long flags)
-{
-	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
-	struct xilinx_dma_tx_descriptor *desc;
-	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
-	struct xilinx_cdma_desc_hw *hw;
-	size_t len, dst_avail, src_avail;
-	dma_addr_t dma_dst, dma_src;
-
-	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
-		return NULL;
-
-	if (unlikely(!dst_sg  || !src_sg))
-		return NULL;
-
-	desc = xilinx_dma_alloc_tx_descriptor(chan);
-	if (!desc)
-		return NULL;
-
-	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
-	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
-
-	dst_avail = sg_dma_len(dst_sg);
-	src_avail = sg_dma_len(src_sg);
-	/*
-	 * loop until there is either no more source or no more destination
-	 * scatterlist entry
-	 */
-	while (true) {
-		len = min_t(size_t, src_avail, dst_avail);
-		len = min_t(size_t, len, chan->xdev->max_buffer_len);
-		if (len == 0)
-			goto fetch;
-
-		/* Allocate the link descriptor from DMA pool */
-		segment = xilinx_cdma_alloc_tx_segment(chan);
-		if (!segment)
-			goto error;
-
-		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
-			dst_avail;
-		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
-			src_avail;
-		hw = &segment->hw;
-		hw->control = len;
-		hw->src_addr = dma_src;
-		hw->dest_addr = dma_dst;
-		if (chan->ext_addr) {
-			hw->src_addr_msb = upper_32_bits(dma_src);
-			hw->dest_addr_msb = upper_32_bits(dma_dst);
-		}
-
-		if (prev) {
-			prev->hw.next_desc = segment->phys;
-			if (chan->ext_addr)
-				prev->hw.next_desc_msb =
-					upper_32_bits(segment->phys);
-		}
-
-		prev = segment;
-		dst_avail -= len;
-		src_avail -= len;
-		list_add_tail(&segment->node, &desc->segments);
-
-fetch:
-		/* Fetch the next dst scatterlist entry */
-		if (dst_avail == 0) {
-			if (dst_sg_len == 0)
-				break;
-			dst_sg = sg_next(dst_sg);
-			if (dst_sg == NULL)
-				break;
-			dst_sg_len--;
-			dst_avail = sg_dma_len(dst_sg);
-		}
-		/* Fetch the next src scatterlist entry */
-		if (src_avail == 0) {
-			if (src_sg_len == 0)
-				break;
-			src_sg = sg_next(src_sg);
-			if (src_sg == NULL)
-				break;
-			src_sg_len--;
-			src_avail = sg_dma_len(src_sg);
-		}
-	}
-
-	if (list_empty(&desc->segments)) {
-		dev_err(chan->xdev->dev,
-			"%s: Zero-size SG transfer requested\n", __func__);
-		goto error;
-	}
-
-	/* Link the last hardware descriptor with the first. */
-	segment = list_first_entry(&desc->segments,
-				struct xilinx_cdma_tx_segment, node);
-	desc->async_tx.phys = segment->phys;
-	prev->hw.next_desc = segment->phys;
-
-	return &desc->async_tx;
-
-error:
-	xilinx_dma_free_tx_descriptor(chan, desc);
-	return NULL;
-}
-
 /**
  * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
  * @dchan: DMA channel
@@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
 	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
-		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
-		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
 		/* Residue calculation is supported by only AXI DMA and CDMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index b46b88e6aa0d1..c923f4e60f240 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -50,7 +50,6 @@ enum dma_status {
  */
 enum dma_transaction_type {
 	DMA_MEMCPY,
-	DMA_MEMCPY_SG,
 	DMA_XOR,
 	DMA_PQ,
 	DMA_XOR_VAL,
@@ -887,11 +886,6 @@ struct dma_device {
 	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
 		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
 		size_t len, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
-		unsigned long flags);
 	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
 		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
 		unsigned int src_cnt, size_t len, unsigned long flags);
@@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
 						    len, flags);
 }
 
-static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
-		unsigned long flags)
-{
-	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
-		return NULL;
-
-	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
-						       src_sg, src_nents,
-						       flags);
-}
-
 static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
 		enum dma_desc_metadata_mode mode)
 {
-- 
2.30.2

[PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Christoph Hellwig]

This was removed before due to the complete lack of users, but
3218910fd585 ("dmaengine: Add core function and capability check for
DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
DMA_MEMCPY_SG API function.") added it back despite still not having
any users whatsoever.

Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 .../driver-api/dmaengine/provider.rst         |  10 --
 drivers/dma/dmaengine.c                       |   7 -
 drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
 include/linux/dmaengine.h                     |  20 ---
 4 files changed, 159 deletions(-)

diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
index 1e0f1f85d10e5..ceac2a300e328 100644
--- a/Documentation/driver-api/dmaengine/provider.rst
+++ b/Documentation/driver-api/dmaengine/provider.rst
@@ -162,16 +162,6 @@ Currently, the types available are:
 
   - The device is able to do memory to memory copies
 
-- - DMA_MEMCPY_SG
-
-  - The device supports memory to memory scatter-gather transfers.
-
-  - Even though a plain memcpy can look like a particular case of a
-    scatter-gather transfer, with a single chunk to copy, it's a distinct
-    transaction type in the mem2mem transfer case. This is because some very
-    simple devices might be able to do contiguous single-chunk memory copies,
-    but have no support for more complex SG transfers.
-
   - No matter what the overall size of the combined chunks for source and
     destination is, only as many bytes as the smallest of the two will be
     transmitted. That means the number and size of the scatter-gather buffers in
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index e80feeea0e018..c741b6431958c 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
 		return -EIO;
 	}
 
-	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
-		dev_err(device->dev,
-			"Device claims capability %s, but op is not defined\n",
-			"DMA_MEMCPY_SG");
-		return -EIO;
-	}
-
 	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
 		dev_err(device->dev,
 			"Device claims capability %s, but op is not defined\n",
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cd62bbb50e8b4..6276934d4d2be 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
 	return NULL;
 }
 
-/**
- * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
- * @dchan: DMA channel
- * @dst_sg: Destination scatter list
- * @dst_sg_len: Number of entries in destination scatter list
- * @src_sg: Source scatter list
- * @src_sg_len: Number of entries in source scatter list
- * @flags: transfer ack flags
- *
- * Return: Async transaction descriptor on success and NULL on failure
- */
-static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
-			struct dma_chan *dchan, struct scatterlist *dst_sg,
-			unsigned int dst_sg_len, struct scatterlist *src_sg,
-			unsigned int src_sg_len, unsigned long flags)
-{
-	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
-	struct xilinx_dma_tx_descriptor *desc;
-	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
-	struct xilinx_cdma_desc_hw *hw;
-	size_t len, dst_avail, src_avail;
-	dma_addr_t dma_dst, dma_src;
-
-	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
-		return NULL;
-
-	if (unlikely(!dst_sg  || !src_sg))
-		return NULL;
-
-	desc = xilinx_dma_alloc_tx_descriptor(chan);
-	if (!desc)
-		return NULL;
-
-	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
-	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
-
-	dst_avail = sg_dma_len(dst_sg);
-	src_avail = sg_dma_len(src_sg);
-	/*
-	 * loop until there is either no more source or no more destination
-	 * scatterlist entry
-	 */
-	while (true) {
-		len = min_t(size_t, src_avail, dst_avail);
-		len = min_t(size_t, len, chan->xdev->max_buffer_len);
-		if (len == 0)
-			goto fetch;
-
-		/* Allocate the link descriptor from DMA pool */
-		segment = xilinx_cdma_alloc_tx_segment(chan);
-		if (!segment)
-			goto error;
-
-		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
-			dst_avail;
-		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
-			src_avail;
-		hw = &segment->hw;
-		hw->control = len;
-		hw->src_addr = dma_src;
-		hw->dest_addr = dma_dst;
-		if (chan->ext_addr) {
-			hw->src_addr_msb = upper_32_bits(dma_src);
-			hw->dest_addr_msb = upper_32_bits(dma_dst);
-		}
-
-		if (prev) {
-			prev->hw.next_desc = segment->phys;
-			if (chan->ext_addr)
-				prev->hw.next_desc_msb =
-					upper_32_bits(segment->phys);
-		}
-
-		prev = segment;
-		dst_avail -= len;
-		src_avail -= len;
-		list_add_tail(&segment->node, &desc->segments);
-
-fetch:
-		/* Fetch the next dst scatterlist entry */
-		if (dst_avail == 0) {
-			if (dst_sg_len == 0)
-				break;
-			dst_sg = sg_next(dst_sg);
-			if (dst_sg == NULL)
-				break;
-			dst_sg_len--;
-			dst_avail = sg_dma_len(dst_sg);
-		}
-		/* Fetch the next src scatterlist entry */
-		if (src_avail == 0) {
-			if (src_sg_len == 0)
-				break;
-			src_sg = sg_next(src_sg);
-			if (src_sg == NULL)
-				break;
-			src_sg_len--;
-			src_avail = sg_dma_len(src_sg);
-		}
-	}
-
-	if (list_empty(&desc->segments)) {
-		dev_err(chan->xdev->dev,
-			"%s: Zero-size SG transfer requested\n", __func__);
-		goto error;
-	}
-
-	/* Link the last hardware descriptor with the first. */
-	segment = list_first_entry(&desc->segments,
-				struct xilinx_cdma_tx_segment, node);
-	desc->async_tx.phys = segment->phys;
-	prev->hw.next_desc = segment->phys;
-
-	return &desc->async_tx;
-
-error:
-	xilinx_dma_free_tx_descriptor(chan, desc);
-	return NULL;
-}
-
 /**
  * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
  * @dchan: DMA channel
@@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
 	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
-		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
-		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
 		/* Residue calculation is supported by only AXI DMA and CDMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index b46b88e6aa0d1..c923f4e60f240 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -50,7 +50,6 @@ enum dma_status {
  */
 enum dma_transaction_type {
 	DMA_MEMCPY,
-	DMA_MEMCPY_SG,
 	DMA_XOR,
 	DMA_PQ,
 	DMA_XOR_VAL,
@@ -887,11 +886,6 @@ struct dma_device {
 	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
 		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
 		size_t len, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
-		unsigned long flags);
 	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
 		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
 		unsigned int src_cnt, size_t len, unsigned long flags);
@@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
 						    len, flags);
 }
 
-static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
-		unsigned long flags)
-{
-	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
-		return NULL;
-
-	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
-						       src_sg, src_nents,
-						       flags);
-}
-
 static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
 		enum dma_desc_metadata_mode mode)
 {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Vinod Koul]

On 06-06-22, 09:47, Christoph Hellwig wrote:
> This was removed before due to the complete lack of users, but
> 3218910fd585 ("dmaengine: Add core function and capability check for
> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> DMA_MEMCPY_SG API function.") added it back despite still not having
> any users whatsoever.
> 
> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")

This is consumer of the driver API and it was bought back with the
premise that user will also come...

Adrianm, Michal any reason why user is not mainline yet..?

> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  .../driver-api/dmaengine/provider.rst         |  10 --
>  drivers/dma/dmaengine.c                       |   7 -
>  drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
>  include/linux/dmaengine.h                     |  20 ---
>  4 files changed, 159 deletions(-)
> 
> diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
> index 1e0f1f85d10e5..ceac2a300e328 100644
> --- a/Documentation/driver-api/dmaengine/provider.rst
> +++ b/Documentation/driver-api/dmaengine/provider.rst
> @@ -162,16 +162,6 @@ Currently, the types available are:
>  
>    - The device is able to do memory to memory copies
>  
> -- - DMA_MEMCPY_SG
> -
> -  - The device supports memory to memory scatter-gather transfers.
> -
> -  - Even though a plain memcpy can look like a particular case of a
> -    scatter-gather transfer, with a single chunk to copy, it's a distinct
> -    transaction type in the mem2mem transfer case. This is because some very
> -    simple devices might be able to do contiguous single-chunk memory copies,
> -    but have no support for more complex SG transfers.
> -
>    - No matter what the overall size of the combined chunks for source and
>      destination is, only as many bytes as the smallest of the two will be
>      transmitted. That means the number and size of the scatter-gather buffers in
> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
> index e80feeea0e018..c741b6431958c 100644
> --- a/drivers/dma/dmaengine.c
> +++ b/drivers/dma/dmaengine.c
> @@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
>  		return -EIO;
>  	}
>  
> -	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
> -		dev_err(device->dev,
> -			"Device claims capability %s, but op is not defined\n",
> -			"DMA_MEMCPY_SG");
> -		return -EIO;
> -	}
> -
>  	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
>  		dev_err(device->dev,
>  			"Device claims capability %s, but op is not defined\n",
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index cd62bbb50e8b4..6276934d4d2be 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
>  	return NULL;
>  }
>  
> -/**
> - * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
> - * @dchan: DMA channel
> - * @dst_sg: Destination scatter list
> - * @dst_sg_len: Number of entries in destination scatter list
> - * @src_sg: Source scatter list
> - * @src_sg_len: Number of entries in source scatter list
> - * @flags: transfer ack flags
> - *
> - * Return: Async transaction descriptor on success and NULL on failure
> - */
> -static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
> -			struct dma_chan *dchan, struct scatterlist *dst_sg,
> -			unsigned int dst_sg_len, struct scatterlist *src_sg,
> -			unsigned int src_sg_len, unsigned long flags)
> -{
> -	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
> -	struct xilinx_dma_tx_descriptor *desc;
> -	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
> -	struct xilinx_cdma_desc_hw *hw;
> -	size_t len, dst_avail, src_avail;
> -	dma_addr_t dma_dst, dma_src;
> -
> -	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
> -		return NULL;
> -
> -	if (unlikely(!dst_sg  || !src_sg))
> -		return NULL;
> -
> -	desc = xilinx_dma_alloc_tx_descriptor(chan);
> -	if (!desc)
> -		return NULL;
> -
> -	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
> -	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
> -
> -	dst_avail = sg_dma_len(dst_sg);
> -	src_avail = sg_dma_len(src_sg);
> -	/*
> -	 * loop until there is either no more source or no more destination
> -	 * scatterlist entry
> -	 */
> -	while (true) {
> -		len = min_t(size_t, src_avail, dst_avail);
> -		len = min_t(size_t, len, chan->xdev->max_buffer_len);
> -		if (len == 0)
> -			goto fetch;
> -
> -		/* Allocate the link descriptor from DMA pool */
> -		segment = xilinx_cdma_alloc_tx_segment(chan);
> -		if (!segment)
> -			goto error;
> -
> -		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
> -			dst_avail;
> -		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
> -			src_avail;
> -		hw = &segment->hw;
> -		hw->control = len;
> -		hw->src_addr = dma_src;
> -		hw->dest_addr = dma_dst;
> -		if (chan->ext_addr) {
> -			hw->src_addr_msb = upper_32_bits(dma_src);
> -			hw->dest_addr_msb = upper_32_bits(dma_dst);
> -		}
> -
> -		if (prev) {
> -			prev->hw.next_desc = segment->phys;
> -			if (chan->ext_addr)
> -				prev->hw.next_desc_msb =
> -					upper_32_bits(segment->phys);
> -		}
> -
> -		prev = segment;
> -		dst_avail -= len;
> -		src_avail -= len;
> -		list_add_tail(&segment->node, &desc->segments);
> -
> -fetch:
> -		/* Fetch the next dst scatterlist entry */
> -		if (dst_avail == 0) {
> -			if (dst_sg_len == 0)
> -				break;
> -			dst_sg = sg_next(dst_sg);
> -			if (dst_sg == NULL)
> -				break;
> -			dst_sg_len--;
> -			dst_avail = sg_dma_len(dst_sg);
> -		}
> -		/* Fetch the next src scatterlist entry */
> -		if (src_avail == 0) {
> -			if (src_sg_len == 0)
> -				break;
> -			src_sg = sg_next(src_sg);
> -			if (src_sg == NULL)
> -				break;
> -			src_sg_len--;
> -			src_avail = sg_dma_len(src_sg);
> -		}
> -	}
> -
> -	if (list_empty(&desc->segments)) {
> -		dev_err(chan->xdev->dev,
> -			"%s: Zero-size SG transfer requested\n", __func__);
> -		goto error;
> -	}
> -
> -	/* Link the last hardware descriptor with the first. */
> -	segment = list_first_entry(&desc->segments,
> -				struct xilinx_cdma_tx_segment, node);
> -	desc->async_tx.phys = segment->phys;
> -	prev->hw.next_desc = segment->phys;
> -
> -	return &desc->async_tx;
> -
> -error:
> -	xilinx_dma_free_tx_descriptor(chan, desc);
> -	return NULL;
> -}
> -
>  /**
>   * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
>   * @dchan: DMA channel
> @@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>  	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
>  		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
> -		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
>  		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
> -		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
>  		/* Residue calculation is supported by only AXI DMA and CDMA */
>  		xdev->common.residue_granularity =
>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> index b46b88e6aa0d1..c923f4e60f240 100644
> --- a/include/linux/dmaengine.h
> +++ b/include/linux/dmaengine.h
> @@ -50,7 +50,6 @@ enum dma_status {
>   */
>  enum dma_transaction_type {
>  	DMA_MEMCPY,
> -	DMA_MEMCPY_SG,
>  	DMA_XOR,
>  	DMA_PQ,
>  	DMA_XOR_VAL,
> @@ -887,11 +886,6 @@ struct dma_device {
>  	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>  		size_t len, unsigned long flags);
> -	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
> -		struct dma_chan *chan,
> -		struct scatterlist *dst_sg, unsigned int dst_nents,
> -		struct scatterlist *src_sg, unsigned int src_nents,
> -		unsigned long flags);
>  	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
>  		unsigned int src_cnt, size_t len, unsigned long flags);
> @@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
>  						    len, flags);
>  }
>  
> -static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
> -		struct dma_chan *chan,
> -		struct scatterlist *dst_sg, unsigned int dst_nents,
> -		struct scatterlist *src_sg, unsigned int src_nents,
> -		unsigned long flags)
> -{
> -	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
> -		return NULL;
> -
> -	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
> -						       src_sg, src_nents,
> -						       flags);
> -}
> -
>  static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
>  		enum dma_desc_metadata_mode mode)
>  {
> -- 
> 2.30.2

-- 
~Vinod

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Vinod Koul]

On 06-06-22, 09:47, Christoph Hellwig wrote:
> This was removed before due to the complete lack of users, but
> 3218910fd585 ("dmaengine: Add core function and capability check for
> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> DMA_MEMCPY_SG API function.") added it back despite still not having
> any users whatsoever.
> 
> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")

This is consumer of the driver API and it was bought back with the
premise that user will also come...

Adrianm, Michal any reason why user is not mainline yet..?

> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  .../driver-api/dmaengine/provider.rst         |  10 --
>  drivers/dma/dmaengine.c                       |   7 -
>  drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
>  include/linux/dmaengine.h                     |  20 ---
>  4 files changed, 159 deletions(-)
> 
> diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
> index 1e0f1f85d10e5..ceac2a300e328 100644
> --- a/Documentation/driver-api/dmaengine/provider.rst
> +++ b/Documentation/driver-api/dmaengine/provider.rst
> @@ -162,16 +162,6 @@ Currently, the types available are:
>  
>    - The device is able to do memory to memory copies
>  
> -- - DMA_MEMCPY_SG
> -
> -  - The device supports memory to memory scatter-gather transfers.
> -
> -  - Even though a plain memcpy can look like a particular case of a
> -    scatter-gather transfer, with a single chunk to copy, it's a distinct
> -    transaction type in the mem2mem transfer case. This is because some very
> -    simple devices might be able to do contiguous single-chunk memory copies,
> -    but have no support for more complex SG transfers.
> -
>    - No matter what the overall size of the combined chunks for source and
>      destination is, only as many bytes as the smallest of the two will be
>      transmitted. That means the number and size of the scatter-gather buffers in
> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
> index e80feeea0e018..c741b6431958c 100644
> --- a/drivers/dma/dmaengine.c
> +++ b/drivers/dma/dmaengine.c
> @@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
>  		return -EIO;
>  	}
>  
> -	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
> -		dev_err(device->dev,
> -			"Device claims capability %s, but op is not defined\n",
> -			"DMA_MEMCPY_SG");
> -		return -EIO;
> -	}
> -
>  	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
>  		dev_err(device->dev,
>  			"Device claims capability %s, but op is not defined\n",
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index cd62bbb50e8b4..6276934d4d2be 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
>  	return NULL;
>  }
>  
> -/**
> - * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
> - * @dchan: DMA channel
> - * @dst_sg: Destination scatter list
> - * @dst_sg_len: Number of entries in destination scatter list
> - * @src_sg: Source scatter list
> - * @src_sg_len: Number of entries in source scatter list
> - * @flags: transfer ack flags
> - *
> - * Return: Async transaction descriptor on success and NULL on failure
> - */
> -static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
> -			struct dma_chan *dchan, struct scatterlist *dst_sg,
> -			unsigned int dst_sg_len, struct scatterlist *src_sg,
> -			unsigned int src_sg_len, unsigned long flags)
> -{
> -	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
> -	struct xilinx_dma_tx_descriptor *desc;
> -	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
> -	struct xilinx_cdma_desc_hw *hw;
> -	size_t len, dst_avail, src_avail;
> -	dma_addr_t dma_dst, dma_src;
> -
> -	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
> -		return NULL;
> -
> -	if (unlikely(!dst_sg  || !src_sg))
> -		return NULL;
> -
> -	desc = xilinx_dma_alloc_tx_descriptor(chan);
> -	if (!desc)
> -		return NULL;
> -
> -	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
> -	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
> -
> -	dst_avail = sg_dma_len(dst_sg);
> -	src_avail = sg_dma_len(src_sg);
> -	/*
> -	 * loop until there is either no more source or no more destination
> -	 * scatterlist entry
> -	 */
> -	while (true) {
> -		len = min_t(size_t, src_avail, dst_avail);
> -		len = min_t(size_t, len, chan->xdev->max_buffer_len);
> -		if (len == 0)
> -			goto fetch;
> -
> -		/* Allocate the link descriptor from DMA pool */
> -		segment = xilinx_cdma_alloc_tx_segment(chan);
> -		if (!segment)
> -			goto error;
> -
> -		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
> -			dst_avail;
> -		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
> -			src_avail;
> -		hw = &segment->hw;
> -		hw->control = len;
> -		hw->src_addr = dma_src;
> -		hw->dest_addr = dma_dst;
> -		if (chan->ext_addr) {
> -			hw->src_addr_msb = upper_32_bits(dma_src);
> -			hw->dest_addr_msb = upper_32_bits(dma_dst);
> -		}
> -
> -		if (prev) {
> -			prev->hw.next_desc = segment->phys;
> -			if (chan->ext_addr)
> -				prev->hw.next_desc_msb =
> -					upper_32_bits(segment->phys);
> -		}
> -
> -		prev = segment;
> -		dst_avail -= len;
> -		src_avail -= len;
> -		list_add_tail(&segment->node, &desc->segments);
> -
> -fetch:
> -		/* Fetch the next dst scatterlist entry */
> -		if (dst_avail == 0) {
> -			if (dst_sg_len == 0)
> -				break;
> -			dst_sg = sg_next(dst_sg);
> -			if (dst_sg == NULL)
> -				break;
> -			dst_sg_len--;
> -			dst_avail = sg_dma_len(dst_sg);
> -		}
> -		/* Fetch the next src scatterlist entry */
> -		if (src_avail == 0) {
> -			if (src_sg_len == 0)
> -				break;
> -			src_sg = sg_next(src_sg);
> -			if (src_sg == NULL)
> -				break;
> -			src_sg_len--;
> -			src_avail = sg_dma_len(src_sg);
> -		}
> -	}
> -
> -	if (list_empty(&desc->segments)) {
> -		dev_err(chan->xdev->dev,
> -			"%s: Zero-size SG transfer requested\n", __func__);
> -		goto error;
> -	}
> -
> -	/* Link the last hardware descriptor with the first. */
> -	segment = list_first_entry(&desc->segments,
> -				struct xilinx_cdma_tx_segment, node);
> -	desc->async_tx.phys = segment->phys;
> -	prev->hw.next_desc = segment->phys;
> -
> -	return &desc->async_tx;
> -
> -error:
> -	xilinx_dma_free_tx_descriptor(chan, desc);
> -	return NULL;
> -}
> -
>  /**
>   * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
>   * @dchan: DMA channel
> @@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>  	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
>  		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
> -		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
>  		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
> -		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
>  		/* Residue calculation is supported by only AXI DMA and CDMA */
>  		xdev->common.residue_granularity =
>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> index b46b88e6aa0d1..c923f4e60f240 100644
> --- a/include/linux/dmaengine.h
> +++ b/include/linux/dmaengine.h
> @@ -50,7 +50,6 @@ enum dma_status {
>   */
>  enum dma_transaction_type {
>  	DMA_MEMCPY,
> -	DMA_MEMCPY_SG,
>  	DMA_XOR,
>  	DMA_PQ,
>  	DMA_XOR_VAL,
> @@ -887,11 +886,6 @@ struct dma_device {
>  	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>  		size_t len, unsigned long flags);
> -	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
> -		struct dma_chan *chan,
> -		struct scatterlist *dst_sg, unsigned int dst_nents,
> -		struct scatterlist *src_sg, unsigned int src_nents,
> -		unsigned long flags);
>  	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
>  		unsigned int src_cnt, size_t len, unsigned long flags);
> @@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
>  						    len, flags);
>  }
>  
> -static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
> -		struct dma_chan *chan,
> -		struct scatterlist *dst_sg, unsigned int dst_nents,
> -		struct scatterlist *src_sg, unsigned int src_nents,
> -		unsigned long flags)
> -{
> -	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
> -		return NULL;
> -
> -	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
> -						       src_sg, src_nents,
> -						       flags);
> -}
> -
>  static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
>  		enum dma_desc_metadata_mode mode)
>  {
> -- 
> 2.30.2

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Adrian Larumbe]

>On 06.06.2022 23:23, Vinod Koul wrote:
>On 06-06-22, 09:47, Christoph Hellwig wrote:
>> This was removed before due to the complete lack of users, but
>> 3218910fd585 ("dmaengine: Add core function and capability check for
>> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
>> DMA_MEMCPY_SG API function.") added it back despite still not having
>> any users whatsoever.
>> 
>> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
>> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
>
>This is consumer of the driver API and it was bought back with the
>premise that user will also come...

It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")

The two previous commits add the new driver API callback and document it.

>Adrianm, Michal any reason why user is not mainline yet..?

Just double checked the mainline, and all three commits are there.

>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>>  .../driver-api/dmaengine/provider.rst         |  10 --
>>  drivers/dma/dmaengine.c                       |   7 -
>>  drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
>>  include/linux/dmaengine.h                     |  20 ---
>>  4 files changed, 159 deletions(-)
>> 
>> diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
>> index 1e0f1f85d10e5..ceac2a300e328 100644
>> --- a/Documentation/driver-api/dmaengine/provider.rst
>> +++ b/Documentation/driver-api/dmaengine/provider.rst
>> @@ -162,16 +162,6 @@ Currently, the types available are:
>>  
>>    - The device is able to do memory to memory copies
>>  
>> -- - DMA_MEMCPY_SG
>> -
>> -  - The device supports memory to memory scatter-gather transfers.
>> -
>> -  - Even though a plain memcpy can look like a particular case of a
>> -    scatter-gather transfer, with a single chunk to copy, it's a distinct
>> -    transaction type in the mem2mem transfer case. This is because some very
>> -    simple devices might be able to do contiguous single-chunk memory copies,
>> -    but have no support for more complex SG transfers.
>> -
>>    - No matter what the overall size of the combined chunks for source and
>>      destination is, only as many bytes as the smallest of the two will be
>>      transmitted. That means the number and size of the scatter-gather buffers in
>> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
>> index e80feeea0e018..c741b6431958c 100644
>> --- a/drivers/dma/dmaengine.c
>> +++ b/drivers/dma/dmaengine.c
>> @@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
>>  		return -EIO;
>>  	}
>>  
>> -	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
>> -		dev_err(device->dev,
>> -			"Device claims capability %s, but op is not defined\n",
>> -			"DMA_MEMCPY_SG");
>> -		return -EIO;
>> -	}
>> -
>>  	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
>>  		dev_err(device->dev,
>>  			"Device claims capability %s, but op is not defined\n",
>> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
>> index cd62bbb50e8b4..6276934d4d2be 100644
>> --- a/drivers/dma/xilinx/xilinx_dma.c
>> +++ b/drivers/dma/xilinx/xilinx_dma.c
>> @@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
>>  	return NULL;
>>  }
>>  
>> -/**
>> - * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
>> - * @dchan: DMA channel
>> - * @dst_sg: Destination scatter list
>> - * @dst_sg_len: Number of entries in destination scatter list
>> - * @src_sg: Source scatter list
>> - * @src_sg_len: Number of entries in source scatter list
>> - * @flags: transfer ack flags
>> - *
>> - * Return: Async transaction descriptor on success and NULL on failure
>> - */
>> -static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
>> -			struct dma_chan *dchan, struct scatterlist *dst_sg,
>> -			unsigned int dst_sg_len, struct scatterlist *src_sg,
>> -			unsigned int src_sg_len, unsigned long flags)
>> -{
>> -	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
>> -	struct xilinx_dma_tx_descriptor *desc;
>> -	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
>> -	struct xilinx_cdma_desc_hw *hw;
>> -	size_t len, dst_avail, src_avail;
>> -	dma_addr_t dma_dst, dma_src;
>> -
>> -	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
>> -		return NULL;
>> -
>> -	if (unlikely(!dst_sg  || !src_sg))
>> -		return NULL;
>> -
>> -	desc = xilinx_dma_alloc_tx_descriptor(chan);
>> -	if (!desc)
>> -		return NULL;
>> -
>> -	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
>> -	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
>> -
>> -	dst_avail = sg_dma_len(dst_sg);
>> -	src_avail = sg_dma_len(src_sg);
>> -	/*
>> -	 * loop until there is either no more source or no more destination
>> -	 * scatterlist entry
>> -	 */
>> -	while (true) {
>> -		len = min_t(size_t, src_avail, dst_avail);
>> -		len = min_t(size_t, len, chan->xdev->max_buffer_len);
>> -		if (len == 0)
>> -			goto fetch;
>> -
>> -		/* Allocate the link descriptor from DMA pool */
>> -		segment = xilinx_cdma_alloc_tx_segment(chan);
>> -		if (!segment)
>> -			goto error;
>> -
>> -		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
>> -			dst_avail;
>> -		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
>> -			src_avail;
>> -		hw = &segment->hw;
>> -		hw->control = len;
>> -		hw->src_addr = dma_src;
>> -		hw->dest_addr = dma_dst;
>> -		if (chan->ext_addr) {
>> -			hw->src_addr_msb = upper_32_bits(dma_src);
>> -			hw->dest_addr_msb = upper_32_bits(dma_dst);
>> -		}
>> -
>> -		if (prev) {
>> -			prev->hw.next_desc = segment->phys;
>> -			if (chan->ext_addr)
>> -				prev->hw.next_desc_msb =
>> -					upper_32_bits(segment->phys);
>> -		}
>> -
>> -		prev = segment;
>> -		dst_avail -= len;
>> -		src_avail -= len;
>> -		list_add_tail(&segment->node, &desc->segments);
>> -
>> -fetch:
>> -		/* Fetch the next dst scatterlist entry */
>> -		if (dst_avail == 0) {
>> -			if (dst_sg_len == 0)
>> -				break;
>> -			dst_sg = sg_next(dst_sg);
>> -			if (dst_sg == NULL)
>> -				break;
>> -			dst_sg_len--;
>> -			dst_avail = sg_dma_len(dst_sg);
>> -		}
>> -		/* Fetch the next src scatterlist entry */
>> -		if (src_avail == 0) {
>> -			if (src_sg_len == 0)
>> -				break;
>> -			src_sg = sg_next(src_sg);
>> -			if (src_sg == NULL)
>> -				break;
>> -			src_sg_len--;
>> -			src_avail = sg_dma_len(src_sg);
>> -		}
>> -	}
>> -
>> -	if (list_empty(&desc->segments)) {
>> -		dev_err(chan->xdev->dev,
>> -			"%s: Zero-size SG transfer requested\n", __func__);
>> -		goto error;
>> -	}
>> -
>> -	/* Link the last hardware descriptor with the first. */
>> -	segment = list_first_entry(&desc->segments,
>> -				struct xilinx_cdma_tx_segment, node);
>> -	desc->async_tx.phys = segment->phys;
>> -	prev->hw.next_desc = segment->phys;
>> -
>> -	return &desc->async_tx;
>> -
>> -error:
>> -	xilinx_dma_free_tx_descriptor(chan, desc);
>> -	return NULL;
>> -}
>> -
>>  /**
>>   * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
>>   * @dchan: DMA channel
>> @@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>>  	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
>>  		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
>> -		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
>>  		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
>> -		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
>>  		/* Residue calculation is supported by only AXI DMA and CDMA */
>>  		xdev->common.residue_granularity =
>>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
>> index b46b88e6aa0d1..c923f4e60f240 100644
>> --- a/include/linux/dmaengine.h
>> +++ b/include/linux/dmaengine.h
>> @@ -50,7 +50,6 @@ enum dma_status {
>>   */
>>  enum dma_transaction_type {
>>  	DMA_MEMCPY,
>> -	DMA_MEMCPY_SG,
>>  	DMA_XOR,
>>  	DMA_PQ,
>>  	DMA_XOR_VAL,
>> @@ -887,11 +886,6 @@ struct dma_device {
>>  	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
>>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>>  		size_t len, unsigned long flags);
>> -	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
>> -		struct dma_chan *chan,
>> -		struct scatterlist *dst_sg, unsigned int dst_nents,
>> -		struct scatterlist *src_sg, unsigned int src_nents,
>> -		unsigned long flags);
>>  	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
>>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
>>  		unsigned int src_cnt, size_t len, unsigned long flags);
>> @@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
>>  						    len, flags);
>>  }
>>  
>> -static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
>> -		struct dma_chan *chan,
>> -		struct scatterlist *dst_sg, unsigned int dst_nents,
>> -		struct scatterlist *src_sg, unsigned int src_nents,
>> -		unsigned long flags)
>> -{
>> -	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
>> -		return NULL;
>> -
>> -	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
>> -						       src_sg, src_nents,
>> -						       flags);
>> -}
>> -
>>  static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
>>  		enum dma_desc_metadata_mode mode)
>>  {
>> -- 
>> 2.30.2
>
>-- 
>~Vinod

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Adrian Larumbe]

>On 06.06.2022 23:23, Vinod Koul wrote:
>On 06-06-22, 09:47, Christoph Hellwig wrote:
>> This was removed before due to the complete lack of users, but
>> 3218910fd585 ("dmaengine: Add core function and capability check for
>> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
>> DMA_MEMCPY_SG API function.") added it back despite still not having
>> any users whatsoever.
>> 
>> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
>> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
>
>This is consumer of the driver API and it was bought back with the
>premise that user will also come...

It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")

The two previous commits add the new driver API callback and document it.

>Adrianm, Michal any reason why user is not mainline yet..?

Just double checked the mainline, and all three commits are there.

>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>>  .../driver-api/dmaengine/provider.rst         |  10 --
>>  drivers/dma/dmaengine.c                       |   7 -
>>  drivers/dma/xilinx/xilinx_dma.c               | 122 ------------------
>>  include/linux/dmaengine.h                     |  20 ---
>>  4 files changed, 159 deletions(-)
>> 
>> diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
>> index 1e0f1f85d10e5..ceac2a300e328 100644
>> --- a/Documentation/driver-api/dmaengine/provider.rst
>> +++ b/Documentation/driver-api/dmaengine/provider.rst
>> @@ -162,16 +162,6 @@ Currently, the types available are:
>>  
>>    - The device is able to do memory to memory copies
>>  
>> -- - DMA_MEMCPY_SG
>> -
>> -  - The device supports memory to memory scatter-gather transfers.
>> -
>> -  - Even though a plain memcpy can look like a particular case of a
>> -    scatter-gather transfer, with a single chunk to copy, it's a distinct
>> -    transaction type in the mem2mem transfer case. This is because some very
>> -    simple devices might be able to do contiguous single-chunk memory copies,
>> -    but have no support for more complex SG transfers.
>> -
>>    - No matter what the overall size of the combined chunks for source and
>>      destination is, only as many bytes as the smallest of the two will be
>>      transmitted. That means the number and size of the scatter-gather buffers in
>> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
>> index e80feeea0e018..c741b6431958c 100644
>> --- a/drivers/dma/dmaengine.c
>> +++ b/drivers/dma/dmaengine.c
>> @@ -1153,13 +1153,6 @@ int dma_async_device_register(struct dma_device *device)
>>  		return -EIO;
>>  	}
>>  
>> -	if (dma_has_cap(DMA_MEMCPY_SG, device->cap_mask) && !device->device_prep_dma_memcpy_sg) {
>> -		dev_err(device->dev,
>> -			"Device claims capability %s, but op is not defined\n",
>> -			"DMA_MEMCPY_SG");
>> -		return -EIO;
>> -	}
>> -
>>  	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) {
>>  		dev_err(device->dev,
>>  			"Device claims capability %s, but op is not defined\n",
>> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
>> index cd62bbb50e8b4..6276934d4d2be 100644
>> --- a/drivers/dma/xilinx/xilinx_dma.c
>> +++ b/drivers/dma/xilinx/xilinx_dma.c
>> @@ -2127,126 +2127,6 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
>>  	return NULL;
>>  }
>>  
>> -/**
>> - * xilinx_cdma_prep_memcpy_sg - prepare descriptors for a memcpy_sg transaction
>> - * @dchan: DMA channel
>> - * @dst_sg: Destination scatter list
>> - * @dst_sg_len: Number of entries in destination scatter list
>> - * @src_sg: Source scatter list
>> - * @src_sg_len: Number of entries in source scatter list
>> - * @flags: transfer ack flags
>> - *
>> - * Return: Async transaction descriptor on success and NULL on failure
>> - */
>> -static struct dma_async_tx_descriptor *xilinx_cdma_prep_memcpy_sg(
>> -			struct dma_chan *dchan, struct scatterlist *dst_sg,
>> -			unsigned int dst_sg_len, struct scatterlist *src_sg,
>> -			unsigned int src_sg_len, unsigned long flags)
>> -{
>> -	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
>> -	struct xilinx_dma_tx_descriptor *desc;
>> -	struct xilinx_cdma_tx_segment *segment, *prev = NULL;
>> -	struct xilinx_cdma_desc_hw *hw;
>> -	size_t len, dst_avail, src_avail;
>> -	dma_addr_t dma_dst, dma_src;
>> -
>> -	if (unlikely(dst_sg_len == 0 || src_sg_len == 0))
>> -		return NULL;
>> -
>> -	if (unlikely(!dst_sg  || !src_sg))
>> -		return NULL;
>> -
>> -	desc = xilinx_dma_alloc_tx_descriptor(chan);
>> -	if (!desc)
>> -		return NULL;
>> -
>> -	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
>> -	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
>> -
>> -	dst_avail = sg_dma_len(dst_sg);
>> -	src_avail = sg_dma_len(src_sg);
>> -	/*
>> -	 * loop until there is either no more source or no more destination
>> -	 * scatterlist entry
>> -	 */
>> -	while (true) {
>> -		len = min_t(size_t, src_avail, dst_avail);
>> -		len = min_t(size_t, len, chan->xdev->max_buffer_len);
>> -		if (len == 0)
>> -			goto fetch;
>> -
>> -		/* Allocate the link descriptor from DMA pool */
>> -		segment = xilinx_cdma_alloc_tx_segment(chan);
>> -		if (!segment)
>> -			goto error;
>> -
>> -		dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
>> -			dst_avail;
>> -		dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
>> -			src_avail;
>> -		hw = &segment->hw;
>> -		hw->control = len;
>> -		hw->src_addr = dma_src;
>> -		hw->dest_addr = dma_dst;
>> -		if (chan->ext_addr) {
>> -			hw->src_addr_msb = upper_32_bits(dma_src);
>> -			hw->dest_addr_msb = upper_32_bits(dma_dst);
>> -		}
>> -
>> -		if (prev) {
>> -			prev->hw.next_desc = segment->phys;
>> -			if (chan->ext_addr)
>> -				prev->hw.next_desc_msb =
>> -					upper_32_bits(segment->phys);
>> -		}
>> -
>> -		prev = segment;
>> -		dst_avail -= len;
>> -		src_avail -= len;
>> -		list_add_tail(&segment->node, &desc->segments);
>> -
>> -fetch:
>> -		/* Fetch the next dst scatterlist entry */
>> -		if (dst_avail == 0) {
>> -			if (dst_sg_len == 0)
>> -				break;
>> -			dst_sg = sg_next(dst_sg);
>> -			if (dst_sg == NULL)
>> -				break;
>> -			dst_sg_len--;
>> -			dst_avail = sg_dma_len(dst_sg);
>> -		}
>> -		/* Fetch the next src scatterlist entry */
>> -		if (src_avail == 0) {
>> -			if (src_sg_len == 0)
>> -				break;
>> -			src_sg = sg_next(src_sg);
>> -			if (src_sg == NULL)
>> -				break;
>> -			src_sg_len--;
>> -			src_avail = sg_dma_len(src_sg);
>> -		}
>> -	}
>> -
>> -	if (list_empty(&desc->segments)) {
>> -		dev_err(chan->xdev->dev,
>> -			"%s: Zero-size SG transfer requested\n", __func__);
>> -		goto error;
>> -	}
>> -
>> -	/* Link the last hardware descriptor with the first. */
>> -	segment = list_first_entry(&desc->segments,
>> -				struct xilinx_cdma_tx_segment, node);
>> -	desc->async_tx.phys = segment->phys;
>> -	prev->hw.next_desc = segment->phys;
>> -
>> -	return &desc->async_tx;
>> -
>> -error:
>> -	xilinx_dma_free_tx_descriptor(chan, desc);
>> -	return NULL;
>> -}
>> -
>>  /**
>>   * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
>>   * @dchan: DMA channel
>> @@ -3240,9 +3120,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>>  	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
>>  		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
>> -		dma_cap_set(DMA_MEMCPY_SG, xdev->common.cap_mask);
>>  		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
>> -		xdev->common.device_prep_dma_memcpy_sg = xilinx_cdma_prep_memcpy_sg;
>>  		/* Residue calculation is supported by only AXI DMA and CDMA */
>>  		xdev->common.residue_granularity =
>>  					  DMA_RESIDUE_GRANULARITY_SEGMENT;
>> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
>> index b46b88e6aa0d1..c923f4e60f240 100644
>> --- a/include/linux/dmaengine.h
>> +++ b/include/linux/dmaengine.h
>> @@ -50,7 +50,6 @@ enum dma_status {
>>   */
>>  enum dma_transaction_type {
>>  	DMA_MEMCPY,
>> -	DMA_MEMCPY_SG,
>>  	DMA_XOR,
>>  	DMA_PQ,
>>  	DMA_XOR_VAL,
>> @@ -887,11 +886,6 @@ struct dma_device {
>>  	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
>>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>>  		size_t len, unsigned long flags);
>> -	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy_sg)(
>> -		struct dma_chan *chan,
>> -		struct scatterlist *dst_sg, unsigned int dst_nents,
>> -		struct scatterlist *src_sg, unsigned int src_nents,
>> -		unsigned long flags);
>>  	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
>>  		struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
>>  		unsigned int src_cnt, size_t len, unsigned long flags);
>> @@ -1060,20 +1054,6 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
>>  						    len, flags);
>>  }
>>  
>> -static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
>> -		struct dma_chan *chan,
>> -		struct scatterlist *dst_sg, unsigned int dst_nents,
>> -		struct scatterlist *src_sg, unsigned int src_nents,
>> -		unsigned long flags)
>> -{
>> -	if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy_sg)
>> -		return NULL;
>> -
>> -	return chan->device->device_prep_dma_memcpy_sg(chan, dst_sg, dst_nents,
>> -						       src_sg, src_nents,
>> -						       flags);
>> -}
>> -
>>  static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
>>  		enum dma_desc_metadata_mode mode)
>>  {
>> -- 
>> 2.30.2
>
>-- 
>~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Vinod Koul]

On 06-06-22, 20:54, Adrian Larumbe wrote:
> >On 06.06.2022 23:23, Vinod Koul wrote:
> >On 06-06-22, 09:47, Christoph Hellwig wrote:
> >> This was removed before due to the complete lack of users, but
> >> 3218910fd585 ("dmaengine: Add core function and capability check for
> >> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> >> DMA_MEMCPY_SG API function.") added it back despite still not having
> >> any users whatsoever.
> >> 
> >> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
> >> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
> >
> >This is consumer of the driver API and it was bought back with the
> >premise that user will also come...
> 
> It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
> 
> The two previous commits add the new driver API callback and document it.
> 
> >Adrianm, Michal any reason why user is not mainline yet..?
> 
> Just double checked the mainline, and all three commits are there.

There are no clients in mainline which call this API. There is a driver
which implements this API, but no users...

$ git grep dmaengine_prep_dma_memcpy_sg
include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(

-- 
~Vinod

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Vinod Koul]

On 06-06-22, 20:54, Adrian Larumbe wrote:
> >On 06.06.2022 23:23, Vinod Koul wrote:
> >On 06-06-22, 09:47, Christoph Hellwig wrote:
> >> This was removed before due to the complete lack of users, but
> >> 3218910fd585 ("dmaengine: Add core function and capability check for
> >> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> >> DMA_MEMCPY_SG API function.") added it back despite still not having
> >> any users whatsoever.
> >> 
> >> Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
> >> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
> >
> >This is consumer of the driver API and it was bought back with the
> >premise that user will also come...
> 
> It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
> 
> The two previous commits add the new driver API callback and document it.
> 
> >Adrianm, Michal any reason why user is not mainline yet..?
> 
> Just double checked the mainline, and all three commits are there.

There are no clients in mainline which call this API. There is a driver
which implements this API, but no users...

$ git grep dmaengine_prep_dma_memcpy_sg
include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Adrian Larumbe]

On 07.06.2022 09:33, Vinod Koul wrote:
> There are no clients in mainline which call this API. There is a driver
> which implements this API, but no users...
> 
> $ git grep dmaengine_prep_dma_memcpy_sg
> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(

This is true, when I sent this I thought my at the time employer had already
upstreamed their driver changes which make this of this API call, but apparently
it never happened after I left.

In this wise, this change series should probably go away altogether, even if
that means it leaves that driver feature unutilised.

Adrian Larumbe

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Adrian Larumbe]

On 07.06.2022 09:33, Vinod Koul wrote:
> There are no clients in mainline which call this API. There is a driver
> which implements this API, but no users...
> 
> $ git grep dmaengine_prep_dma_memcpy_sg
> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(

This is true, when I sent this I thought my at the time employer had already
upstreamed their driver changes which make this of this API call, but apparently
it never happened after I left.

In this wise, this change series should probably go away altogether, even if
that means it leaves that driver feature unutilised.

Adrian Larumbe

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Michal Simek]

On 6/22/22 16:50, Adrian Larumbe wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> On 07.06.2022 09:33, Vinod Koul wrote:
>> There are no clients in mainline which call this API. There is a driver
>> which implements this API, but no users...
>>
>> $ git grep dmaengine_prep_dma_memcpy_sg
>> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
> 
> This is true, when I sent this I thought my at the time employer had already
> upstreamed their driver changes which make this of this API call, but apparently
> it never happened after I left.
> 
> In this wise, this change series should probably go away altogether, even if
> that means it leaves that driver feature unutilised.

We also don't have a need for it. Driver which was using it is no longer used 
that's why not a problem to remove it.

That's why
Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Michal Simek]

On 6/22/22 16:50, Adrian Larumbe wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> On 07.06.2022 09:33, Vinod Koul wrote:
>> There are no clients in mainline which call this API. There is a driver
>> which implements this API, but no users...
>>
>> $ git grep dmaengine_prep_dma_memcpy_sg
>> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy_sg(
> 
> This is true, when I sent this I thought my at the time employer had already
> upstreamed their driver changes which make this of this API call, but apparently
> it never happened after I left.
> 
> In this wise, this change series should probably go away altogether, even if
> that means it leaves that driver feature unutilised.

We also don't have a need for it. Driver which was using it is no longer used 
that's why not a problem to remove it.

That's why
Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Vinod Koul <vkoul@kernel.org>
> Sent: Tuesday, June 7, 2022 9:34 AM
> To: Adrian Larumbe <adrianml@alumnos.upm.es>
> Cc: Christoph Hellwig <hch@lst.de>; michal.simek@xilinx.com;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again
> 
> On 06-06-22, 20:54, Adrian Larumbe wrote:
> > >On 06.06.2022 23:23, Vinod Koul wrote:
> > >On 06-06-22, 09:47, Christoph Hellwig wrote:
> > >> This was removed before due to the complete lack of users, but
> > >> 3218910fd585 ("dmaengine: Add core function and capability check
> > >> for
> > >> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for
> the
> > >> new DMA_MEMCPY_SG API function.") added it back despite still not
> > >> having any users whatsoever.
> > >>
> > >> Fixes: 3218910fd585 ("dmaengine: Add core function and capability
> > >> check for DMA_MEMCPY_SG")
> > >> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> > >> DMA_MEMCPY_SG API function.")
> > >
> > >This is consumer of the driver API and it was bought back with the
> > >premise that user will also come...
> >
> > It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> > DMA_MEMCPY_SG API function.")
> >
> > The two previous commits add the new driver API callback and document it.
> >
> > >Adrianm, Michal any reason why user is not mainline yet..?

The dma client are use case dependent and mostly on end-users 
to upstream it. In the Xilinx tree, there is no CDMA  user apart from 
dmatest and as of now, there is no plan to support any other client.

It should be fine to revert this support again.

> >
> > Just double checked the mainline, and all three commits are there.
> 
> There are no clients in mainline which call this API. There is a driver which
> implements this API, but no users...
> 
> $ git grep dmaengine_prep_dma_memcpy_sg
> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor
> *dmaengine_prep_dma_memcpy_sg(
> 
> --
> ~Vinod

RE: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Vinod Koul <vkoul@kernel.org>
> Sent: Tuesday, June 7, 2022 9:34 AM
> To: Adrian Larumbe <adrianml@alumnos.upm.es>
> Cc: Christoph Hellwig <hch@lst.de>; michal.simek@xilinx.com;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH] dmaengine: remove DMA_MEMCPY_SG once again
> 
> On 06-06-22, 20:54, Adrian Larumbe wrote:
> > >On 06.06.2022 23:23, Vinod Koul wrote:
> > >On 06-06-22, 09:47, Christoph Hellwig wrote:
> > >> This was removed before due to the complete lack of users, but
> > >> 3218910fd585 ("dmaengine: Add core function and capability check
> > >> for
> > >> DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for
> the
> > >> new DMA_MEMCPY_SG API function.") added it back despite still not
> > >> having any users whatsoever.
> > >>
> > >> Fixes: 3218910fd585 ("dmaengine: Add core function and capability
> > >> check for DMA_MEMCPY_SG")
> > >> Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> > >> DMA_MEMCPY_SG API function.")
> > >
> > >This is consumer of the driver API and it was bought back with the
> > >premise that user will also come...
> >
> > It's commit 29cf37fa6dd9 ("dmaengine: Add consumer for the new
> > DMA_MEMCPY_SG API function.")
> >
> > The two previous commits add the new driver API callback and document it.
> >
> > >Adrianm, Michal any reason why user is not mainline yet..?

The dma client are use case dependent and mostly on end-users 
to upstream it. In the Xilinx tree, there is no CDMA  user apart from 
dmatest and as of now, there is no plan to support any other client.

It should be fine to revert this support again.

> >
> > Just double checked the mainline, and all three commits are there.
> 
> There are no clients in mainline which call this API. There is a driver which
> implements this API, but no users...
> 
> $ git grep dmaengine_prep_dma_memcpy_sg
> include/linux/dmaengine.h:static inline struct dma_async_tx_descriptor
> *dmaengine_prep_dma_memcpy_sg(
> 
> --
> ~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel