[PATCH 4.19 00/48] 4.19.253-rc1 review

[PATCH 4.19 00/48] 4.19.253-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.253 release.
There are 48 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.253-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.253-rc1

Marc Kleine-Budde <mkl@pengutronix.de>
    can: m_can: m_can_tx_handler(): fix use after free of skb

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: stm32: Clear prev values before setting RTS delays

Yi Yang <yiyang13@huawei.com>
    serial: 8250: fix return error code in serial8250_request_std_resource()

Chanho Park <chanho61.park@samsung.com>
    tty: serial: samsung_tty: set dma burst_size to 1

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Fix event pending check

Linyu Yuan <quic_linyyuan@quicinc.com>
    usb: typec: add missing uevent when partner support PD

Lucien Buchmann <lucien.buchmann@gmx.net>
    USB: serial: ftdi_sio: add Belimo device ids

Linus Torvalds <torvalds@linux-foundation.org>
    signal handling: don't use BUG_ON() for debugging

Gabriel Fernandez <gabriel.fernandez@foss.st.com>
    ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

Juergen Gross <jgross@suse.com>
    x86: Clear .brk area at early boot

Stafford Horne <shorne@gmail.com>
    irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: wm5110: Fix DRE control

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix off by one in range control validation

Jianglei Nie <niejianglei2021@163.com>
    net: sfp: fix memory leak in sfp_probe()

Michael Walle <michael@walle.cc>
    NFC: nxp-nci: don't print header length mismatch on i2c error

Hangyu Hua <hbh25y@gmail.com>
    net: tipc: fix possible refcount leak in tipc_sk_create()

Kai-Heng Feng <kai.heng.feng@canonical.com>
    platform/x86: hp-wmi: Ignore Sanitization Mode event

Liang He <windhl@126.com>
    cpufreq: pmac32-cpufreq: Fix refcount leak bug

Florian Westphal <fw@strlen.de>
    netfilter: br_netfilter: do not skip all hooks with 0 priority

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    virtio_mmio: Restore guest page size on resume

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    virtio_mmio: Add missing PM calls to freeze/restore

Íñigo Huguet <ihuguet@redhat.com>
    sfc: fix kernel panic when creating VF

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

Andrea Mayer <andrea.mayer@uniroma2.it>
    seg6: fix skb checksum evaluation in SRH encapsulation/insertion

Íñigo Huguet <ihuguet@redhat.com>
    sfc: fix use after free when disabling sriov

Kuniyuki Iwashima <kuniyu@amazon.com>
    ipv4: Fix data-races around sysctl_ip_dynaddr.

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix a data-race around sysctl_icmp_ratemask.

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix a data-race around sysctl_icmp_ratelimit.

Michal Suchanek <msuchanek@suse.de>
    ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

Kuniyuki Iwashima <kuniyu@amazon.com>
    icmp: Fix data-races around sysctl.

Kuniyuki Iwashima <kuniyu@amazon.com>
    cipso: Fix data-races around sysctl.

Kuniyuki Iwashima <kuniyu@amazon.com>
    net: Fix data-races around sysctl_mem.

Kuniyuki Iwashima <kuniyu@amazon.com>
    inetpeer: Fix data-races around sysctl.

Francesco Dolcini <francesco.dolcini@toradex.com>
    ASoC: sgtl5000: Fix noise on shutdown/remove

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

Kris Bahnsen <kris@embeddedTS.com>
    ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix incorrect masking of permission flags for symlinks

Tejun Heo <tj@kernel.org>
    cgroup: Use separate src/dst nodes when preloading css_sets for migration

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

Dmitry Osipenko <dmitry.osipenko@collabora.com>
    ARM: 9213/1: Print message about disabled Spectre workarounds only once

Steven Rostedt (Google) <rostedt@goodmis.org>
    net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

Zheng Yejian <zhengyejian1@huawei.com>
    tracing/histograms: Fix memory leak problem

Juergen Gross <jgross@suse.com>
    xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

Meng Tang <tangmeng@uniontech.com>
    ALSA: hda - Add fixup for Dell Latitidue E5430


-------------

Diffstat:

 Documentation/networking/ip-sysctl.txt            |  4 +--
 Makefile                                          |  4 +--
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi             |  2 +-
 arch/arm/boot/dts/stm32mp157c.dtsi                |  2 +-
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts |  2 +-
 arch/arm/include/asm/ptrace.h                     | 26 ++++++++++++++++
 arch/arm/mm/alignment.c                           |  3 ++
 arch/arm/mm/proc-v7-bugs.c                        |  9 +++---
 arch/arm/probes/decode.h                          | 26 +---------------
 arch/x86/kernel/head64.c                          |  2 ++
 drivers/cpufreq/pmac32-cpufreq.c                  |  4 +++
 drivers/irqchip/irq-or1k-pic.c                    |  1 -
 drivers/net/can/m_can/m_can.c                     |  5 +--
 drivers/net/ethernet/sfc/ef10.c                   |  3 ++
 drivers/net/ethernet/sfc/ef10_sriov.c             | 10 ++++--
 drivers/net/phy/sfp.c                             |  2 +-
 drivers/net/xen-netback/rx.c                      |  1 +
 drivers/nfc/nxp-nci/i2c.c                         |  8 +++--
 drivers/platform/x86/hp-wmi.c                     |  3 ++
 drivers/tty/serial/8250/8250_port.c               |  4 ++-
 drivers/tty/serial/amba-pl011.c                   | 23 ++++++++++++--
 drivers/tty/serial/samsung.c                      |  5 ++-
 drivers/tty/serial/stm32-usart.c                  |  2 ++
 drivers/usb/dwc3/gadget.c                         |  4 ++-
 drivers/usb/serial/ftdi_sio.c                     |  3 ++
 drivers/usb/serial/ftdi_sio_ids.h                 |  6 ++++
 drivers/usb/typec/class.c                         |  1 +
 drivers/virtio/virtio_mmio.c                      | 26 ++++++++++++++++
 fs/nilfs2/nilfs.h                                 |  3 ++
 include/linux/cgroup-defs.h                       |  3 +-
 include/net/sock.h                                |  2 +-
 include/trace/events/sock.h                       |  6 ++--
 kernel/cgroup/cgroup.c                            | 37 ++++++++++++++---------
 kernel/signal.c                                   |  8 ++---
 kernel/trace/trace_events_hist.c                  |  2 ++
 net/bridge/br_netfilter_hooks.c                   | 21 +++++++++++--
 net/core/filter.c                                 |  1 -
 net/ipv4/af_inet.c                                |  4 +--
 net/ipv4/cipso_ipv4.c                             | 12 +++++---
 net/ipv4/icmp.c                                   | 10 +++---
 net/ipv4/inetpeer.c                               | 12 +++++---
 net/ipv6/seg6_iptunnel.c                          |  5 ++-
 net/ipv6/seg6_local.c                             |  2 --
 net/tipc/socket.c                                 |  1 +
 sound/pci/hda/patch_conexant.c                    |  1 +
 sound/pci/hda/patch_realtek.c                     | 13 ++++++++
 sound/soc/codecs/sgtl5000.c                       |  9 ++++++
 sound/soc/codecs/sgtl5000.h                       |  1 +
 sound/soc/codecs/wm5110.c                         |  8 +++--
 sound/soc/soc-ops.c                               |  4 +--
 50 files changed, 255 insertions(+), 101 deletions(-)

[PATCH 4.19 01/48] ALSA: hda - Add fixup for Dell Latitidue E5430

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit 841bdf85c226803a78a9319af9b2caa9bf3e2eda upstream.

Another Dell model, another fixup entry: Latitude E5430 needs the same
fixup as other Latitude E series as workaround for noise problems.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712060005.20176-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7029,6 +7029,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x132a, "Acer TravelMate B114-21", ALC233_FIXUP_ACER_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1025, 0x1330, "Acer TravelMate X514-51T", ALC255_FIXUP_ACER_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+	SND_PCI_QUIRK(0x1028, 0x053c, "Dell Latitude E5430", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
 	SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x05be, "Dell Latitude E6540", ALC292_FIXUP_DELL_E7X),

[PATCH 4.19 02/48] ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit d16d69bf5a25d91c6d8f3e29711be12551bf56cd upstream.

There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4
that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding
entry to the quirk table.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -918,6 +918,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x103c, 0x828c, "HP EliteBook 840 G4", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8299, "HP 800 G3 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x103c, 0x82b4, "HP ProDesk 600 G3", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x837f, "HP ProBook 470 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),

[PATCH 4.19 03/48] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

[Greg Kroah-Hartman]

From: Meng Tang <tangmeng@uniontech.com>

commit 4ba5c853d7945b3855c3dcb293f7f9f019db641e upstream.

On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5844,6 +5844,7 @@ enum {
 	ALC298_FIXUP_LENOVO_SPK_VOLUME,
 	ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
 	ALC269_FIXUP_ATIV_BOOK_8,
+	ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE,
 	ALC221_FIXUP_HP_MIC_NO_PRESENCE,
 	ALC256_FIXUP_ASUS_HEADSET_MODE,
 	ALC256_FIXUP_ASUS_MIC,
@@ -6642,6 +6643,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_NO_SHUTUP
 	},
+	[ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{ 0x1a, 0x01813030 }, /* use as headphone mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE
+	},
 	[ALC221_FIXUP_HP_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -7136,6 +7147,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x2335, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x2b5e, "HP 288 Pro G2 MT", ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802e, "HP Z240 SFF", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802f, "HP Z240", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x820d, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),

[PATCH 4.19 04/48] xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 94e8100678889ab428e68acadf042de723f094b9 upstream.

xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.

This can lead to crashes:

[40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246
[40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7
[40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8
[40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008
[40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708
[40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0
[40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]

Fix that by stopping the loop in case the rx queue becomes empty.

Cc: stable@vger.kernel.org
Fixes: 98f6d57ced73 ("xen-netback: process guest rx packets in batches")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/rx.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -482,6 +482,7 @@ void xenvif_rx_action(struct xenvif_queu
 	queue->rx_copy.completed = &completed_skbs;
 
 	while (xenvif_rx_ring_slots_available(queue) &&
+	       !skb_queue_empty(&queue->rx_queue) &&
 	       work_done < RX_BATCH_SIZE) {
 		xenvif_rx_skb(queue);
 		work_done++;

[PATCH 4.19 05/48] tracing/histograms: Fix memory leak problem

[Greg Kroah-Hartman]

From: Zheng Yejian <zhengyejian1@huawei.com>

commit 7edc3945bdce9c39198a10d6129377a5c53559c2 upstream.

This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac.

As commit 46bbe5c671e0 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
  > In parse_var_defs() if there is a problem allocating
  > var_defs.expr, the earlier var_defs.name is freed.
  > This free is duplicated by free_var_defs() which frees
  > the rest of the list.

However, if there is a problem allocating N-th var_defs.expr:
  + in parse_var_defs(), the freed 'earlier var_defs.name' is
    actually the N-th var_defs.name;
  + then in free_var_defs(), the names from 0th to (N-1)-th are freed;

                        IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
                                                                 \
                                                                  |
          0th           1th                 (N-1)-th      N-th    V
          +-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
          +-------------+-------------+-----+-------------+-----------

These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.

If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
  $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger

Then kmemleak reports:
  unreferenced object 0xffff8fb100ef3518 (size 8):
    comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
    hex dump (first 8 bytes):
      76 31 00 00 b1 8f ff ff                          v1......
    backtrace:
      [<0000000038fe4895>] kstrdup+0x2d/0x60
      [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
      [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
      [<0000000066737a4c>] event_trigger_write+0x75/0xd0
      [<000000007341e40c>] vfs_write+0xbb/0x2a0
      [<0000000087fde4c2>] ksys_write+0x59/0xd0
      [<00000000581e9cdf>] do_syscall_64+0x3a/0x80
      [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: 46bbe5c671e0 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_hist.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -4266,6 +4266,8 @@ static int parse_var_defs(struct hist_tr
 
 			s = kstrdup(field_str, GFP_KERNEL);
 			if (!s) {
+				kfree(hist_data->attrs->var_defs.name[n_vars]);
+				hist_data->attrs->var_defs.name[n_vars] = NULL;
 				ret = -ENOMEM;
 				goto free;
 			}

[PATCH 4.19 06/48] net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 820b8963adaea34a87abbecb906d1f54c0aabfb7 upstream.

The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer
and then dereferences it in the TP_printk() portion. This is unsafe as the
TP_printk() portion is executed at the time the buffer is read. That is,
it can be seconds, minutes, days, months, even years later. If the proto
is freed, then this dereference will can also lead to a kernel crash.

Instead, save the sysctl_mem array into the ring buffer and have the
TP_printk() reference that instead. This is the proper and safe way to
read pointers in trace events.

Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/

Cc: stable@vger.kernel.org
Fixes: 3847ce32aea9f ("core: add tracepoints for queueing skb to rcvbuf")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/sock.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/include/trace/events/sock.h
+++ b/include/trace/events/sock.h
@@ -97,7 +97,7 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_STRUCT__entry(
 		__array(char, name, 32)
-		__field(long *, sysctl_mem)
+		__array(long, sysctl_mem, 3)
 		__field(long, allocated)
 		__field(int, sysctl_rmem)
 		__field(int, rmem_alloc)
@@ -109,7 +109,9 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_fast_assign(
 		strncpy(__entry->name, prot->name, 32);
-		__entry->sysctl_mem = prot->sysctl_mem;
+		__entry->sysctl_mem[0] = READ_ONCE(prot->sysctl_mem[0]);
+		__entry->sysctl_mem[1] = READ_ONCE(prot->sysctl_mem[1]);
+		__entry->sysctl_mem[2] = READ_ONCE(prot->sysctl_mem[2]);
 		__entry->allocated = allocated;
 		__entry->sysctl_rmem = sk_get_rmem0(sk, prot);
 		__entry->rmem_alloc = atomic_read(&sk->sk_rmem_alloc);

[PATCH 4.19 07/48] ARM: 9213/1: Print message about disabled Spectre workarounds only once

[Greg Kroah-Hartman]

From: Dmitry Osipenko <dmitry.osipenko@collabora.com>

commit e4ced82deb5fb17222fb82e092c3f8311955b585 upstream.

Print the message about disabled Spectre workarounds only once. The
message is printed each time CPU goes out from idling state on NVIDIA
Tegra boards, causing storm in KMSG that makes system unusable.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/proc-v7-bugs.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -110,8 +110,7 @@ static unsigned int spectre_v2_install_w
 #else
 static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
-	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
-		smp_processor_id());
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
 
 	return SPECTRE_VULNERABLE;
 }

[PATCH 4.19 08/48] ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit e5c46fde75e43c15a29b40e5fc5641727f97ae47 upstream.

After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.

So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.

Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/ptrace.h |   26 ++++++++++++++++++++++++++
 arch/arm/mm/alignment.c       |    3 +++
 arch/arm/probes/decode.h      |   26 +-------------------------
 3 files changed, 30 insertions(+), 25 deletions(-)

--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -167,5 +167,31 @@ static inline unsigned long user_stack_p
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -936,6 +936,9 @@ do_alignment(unsigned long addr, unsigne
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
--- a/arch/arm/probes/decode.h
+++ b/arch/arm/probes/decode.h
@@ -22,6 +22,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -43,31 +44,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;

[PATCH 4.19 09/48] cgroup: Use separate src/dst nodes when preloading css_sets for migration

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.

Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.

Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:

 #1> mkdir -p /sys/fs/cgroup/misc/a/b
 #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
 #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
 #4> PID=$!
 #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
 #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs

the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.

After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:

 1. cgroup_migrate_add_src() is called on B for the leader.

 2. cgroup_migrate_add_src() is called on A for the other threads.

 3. cgroup_migrate_prepare_dst() is called. It scans the src list.

 4. It notices that B wants to migrate to A, so it tries to A to the dst
    list but realizes that its ->mg_preload_node is already busy.

 5. and then it notices A wants to migrate to A as it's an identity
    migration, it culls it by list_del_init()'ing its ->mg_preload_node and
    putting references accordingly.

 6. The rest of migration takes place with B on the src list but nothing on
    the dst list.

This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.

This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.

This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: shisiyuan <shisiyuan19870131@gmail.com>
Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/cgroup-defs.h |    3 ++-
 kernel/cgroup/cgroup.c      |   37 +++++++++++++++++++++++--------------
 2 files changed, 25 insertions(+), 15 deletions(-)

--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -241,7 +241,8 @@ struct css_set {
 	 * List of csets participating in the on-going migration either as
 	 * source or destination.  Protected by cgroup_mutex.
 	 */
-	struct list_head mg_preload_node;
+	struct list_head mg_src_preload_node;
+	struct list_head mg_dst_preload_node;
 	struct list_head mg_node;
 
 	/*
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -677,7 +677,8 @@ struct css_set init_css_set = {
 	.task_iters		= LIST_HEAD_INIT(init_css_set.task_iters),
 	.threaded_csets		= LIST_HEAD_INIT(init_css_set.threaded_csets),
 	.cgrp_links		= LIST_HEAD_INIT(init_css_set.cgrp_links),
-	.mg_preload_node	= LIST_HEAD_INIT(init_css_set.mg_preload_node),
+	.mg_src_preload_node	= LIST_HEAD_INIT(init_css_set.mg_src_preload_node),
+	.mg_dst_preload_node	= LIST_HEAD_INIT(init_css_set.mg_dst_preload_node),
 	.mg_node		= LIST_HEAD_INIT(init_css_set.mg_node),
 
 	/*
@@ -1151,7 +1152,8 @@ static struct css_set *find_css_set(stru
 	INIT_LIST_HEAD(&cset->threaded_csets);
 	INIT_HLIST_NODE(&cset->hlist);
 	INIT_LIST_HEAD(&cset->cgrp_links);
-	INIT_LIST_HEAD(&cset->mg_preload_node);
+	INIT_LIST_HEAD(&cset->mg_src_preload_node);
+	INIT_LIST_HEAD(&cset->mg_dst_preload_node);
 	INIT_LIST_HEAD(&cset->mg_node);
 
 	/* Copy the set of subsystem state objects generated in
@@ -2455,21 +2457,27 @@ int cgroup_migrate_vet_dst(struct cgroup
  */
 void cgroup_migrate_finish(struct cgroup_mgctx *mgctx)
 {
-	LIST_HEAD(preloaded);
 	struct css_set *cset, *tmp_cset;
 
 	lockdep_assert_held(&cgroup_mutex);
 
 	spin_lock_irq(&css_set_lock);
 
-	list_splice_tail_init(&mgctx->preloaded_src_csets, &preloaded);
-	list_splice_tail_init(&mgctx->preloaded_dst_csets, &preloaded);
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_src_csets,
+				 mg_src_preload_node) {
+		cset->mg_src_cgrp = NULL;
+		cset->mg_dst_cgrp = NULL;
+		cset->mg_dst_cset = NULL;
+		list_del_init(&cset->mg_src_preload_node);
+		put_css_set_locked(cset);
+	}
 
-	list_for_each_entry_safe(cset, tmp_cset, &preloaded, mg_preload_node) {
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_dst_csets,
+				 mg_dst_preload_node) {
 		cset->mg_src_cgrp = NULL;
 		cset->mg_dst_cgrp = NULL;
 		cset->mg_dst_cset = NULL;
-		list_del_init(&cset->mg_preload_node);
+		list_del_init(&cset->mg_dst_preload_node);
 		put_css_set_locked(cset);
 	}
 
@@ -2511,7 +2519,7 @@ void cgroup_migrate_add_src(struct css_s
 
 	src_cgrp = cset_cgroup_from_root(src_cset, dst_cgrp->root);
 
-	if (!list_empty(&src_cset->mg_preload_node))
+	if (!list_empty(&src_cset->mg_src_preload_node))
 		return;
 
 	WARN_ON(src_cset->mg_src_cgrp);
@@ -2522,7 +2530,7 @@ void cgroup_migrate_add_src(struct css_s
 	src_cset->mg_src_cgrp = src_cgrp;
 	src_cset->mg_dst_cgrp = dst_cgrp;
 	get_css_set(src_cset);
-	list_add_tail(&src_cset->mg_preload_node, &mgctx->preloaded_src_csets);
+	list_add_tail(&src_cset->mg_src_preload_node, &mgctx->preloaded_src_csets);
 }
 
 /**
@@ -2547,7 +2555,7 @@ int cgroup_migrate_prepare_dst(struct cg
 
 	/* look up the dst cset for each src cset and link it to src */
 	list_for_each_entry_safe(src_cset, tmp_cset, &mgctx->preloaded_src_csets,
-				 mg_preload_node) {
+				 mg_src_preload_node) {
 		struct css_set *dst_cset;
 		struct cgroup_subsys *ss;
 		int ssid;
@@ -2566,7 +2574,7 @@ int cgroup_migrate_prepare_dst(struct cg
 		if (src_cset == dst_cset) {
 			src_cset->mg_src_cgrp = NULL;
 			src_cset->mg_dst_cgrp = NULL;
-			list_del_init(&src_cset->mg_preload_node);
+			list_del_init(&src_cset->mg_src_preload_node);
 			put_css_set(src_cset);
 			put_css_set(dst_cset);
 			continue;
@@ -2574,8 +2582,8 @@ int cgroup_migrate_prepare_dst(struct cg
 
 		src_cset->mg_dst_cset = dst_cset;
 
-		if (list_empty(&dst_cset->mg_preload_node))
-			list_add_tail(&dst_cset->mg_preload_node,
+		if (list_empty(&dst_cset->mg_dst_preload_node))
+			list_add_tail(&dst_cset->mg_dst_preload_node,
 				      &mgctx->preloaded_dst_csets);
 		else
 			put_css_set(dst_cset);
@@ -2809,7 +2817,8 @@ static int cgroup_update_dfl_csses(struc
 		goto out_finish;
 
 	spin_lock_irq(&css_set_lock);
-	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets, mg_preload_node) {
+	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets,
+			    mg_src_preload_node) {
 		struct task_struct *task, *ntask;
 
 		/* all tasks in src_csets need to be migrated */

[PATCH 4.19 10/48] nilfs2: fix incorrect masking of permission flags for symlinks

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 5924e6ec1585445f251ea92713eb15beb732622a upstream.

The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:

 $ umask
 0022
 $ touch file && ln -s file symlink; ls -l file symlink
 -rw-r--r--. 1 root root 0 Jun 23 16:29 file
 lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file

This fixes the bug by inserting a missing check that excludes
symlinks.

Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/nilfs.h |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -198,6 +198,9 @@ static inline int nilfs_acl_chmod(struct
 
 static inline int nilfs_init_acl(struct inode *inode, struct inode *dir)
 {
+	if (S_ISLNK(inode->i_mode))
+		return 0;
+
 	inode->i_mode &= ~current_umask();
 	return 0;
 }

[PATCH 4.19 11/48] ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

[Greg Kroah-Hartman]

From: Kris Bahnsen <kris@embeddedTS.com>

[ Upstream commit e95ea0f687e679fcb0a3a67d0755b81ee7d60db0 ]

Device-tree incorrectly used "ngpio" which caused the driver to
fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes: 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index f0be516dc28e..9181fbeb833d 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -226,7 +226,7 @@ gpio8: gpio@28 {
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
-- 
2.35.1

[PATCH 4.19 12/48] ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 0609e200246bfd3b7516091c491bec4308349055 ]

Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.

Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.

This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.

In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-v7-bugs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 40fb2900038e..e53f824a2583 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -222,10 +222,10 @@ static int spectre_bhb_install_workaround(int method)
 			return SPECTRE_VULNERABLE;
 
 		spectre_bhb_method = method;
-	}
 
-	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
-		smp_processor_id(), spectre_bhb_method_name(method));
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
 
 	return SPECTRE_MITIGATED;
 }
-- 
2.35.1

[PATCH 4.19 13/48] ASoC: sgtl5000: Fix noise on shutdown/remove

[Greg Kroah-Hartman]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ]

Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.

The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.

Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 9 +++++++++
 sound/soc/codecs/sgtl5000.h | 1 +
 2 files changed, 10 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 17255e9683f5..13e752f8b3f7 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1769,6 +1769,9 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 {
 	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
 
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_DIG_POWER, SGTL5000_DIG_POWER_DEFAULT);
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, SGTL5000_ANA_POWER_DEFAULT);
+
 	clk_disable_unprepare(sgtl5000->mclk);
 	regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
 	regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
@@ -1776,6 +1779,11 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static void sgtl5000_i2c_shutdown(struct i2c_client *client)
+{
+	sgtl5000_i2c_remove(client);
+}
+
 static const struct i2c_device_id sgtl5000_id[] = {
 	{"sgtl5000", 0},
 	{},
@@ -1796,6 +1804,7 @@ static struct i2c_driver sgtl5000_i2c_driver = {
 		   },
 	.probe = sgtl5000_i2c_probe,
 	.remove = sgtl5000_i2c_remove,
+	.shutdown = sgtl5000_i2c_shutdown,
 	.id_table = sgtl5000_id,
 };
 
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 066517e352a7..0ed4bad92cd1 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -80,6 +80,7 @@
 /*
  * SGTL5000_CHIP_DIG_POWER
  */
+#define SGTL5000_DIG_POWER_DEFAULT		0x0000
 #define SGTL5000_ADC_EN				0x0040
 #define SGTL5000_DAC_EN				0x0020
 #define SGTL5000_DAP_POWERUP			0x0010
-- 
2.35.1

[PATCH 4.19 14/48] inetpeer: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ]

While reading inetpeer sysctl variables, they can be changed
concurrently.  So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inetpeer.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index ff327a62c9ce..a18668552d33 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -148,16 +148,20 @@ static void inet_peer_gc(struct inet_peer_base *base,
 			 struct inet_peer *gc_stack[],
 			 unsigned int gc_cnt)
 {
+	int peer_threshold, peer_maxttl, peer_minttl;
 	struct inet_peer *p;
 	__u32 delta, ttl;
 	int i;
 
-	if (base->total >= inet_peer_threshold)
+	peer_threshold = READ_ONCE(inet_peer_threshold);
+	peer_maxttl = READ_ONCE(inet_peer_maxttl);
+	peer_minttl = READ_ONCE(inet_peer_minttl);
+
+	if (base->total >= peer_threshold)
 		ttl = 0; /* be aggressive */
 	else
-		ttl = inet_peer_maxttl
-				- (inet_peer_maxttl - inet_peer_minttl) / HZ *
-					base->total / inet_peer_threshold * HZ;
+		ttl = peer_maxttl - (peer_maxttl - peer_minttl) / HZ *
+			base->total / peer_threshold * HZ;
 	for (i = 0; i < gc_cnt; i++) {
 		p = gc_stack[i];
 
-- 
2.35.1

[PATCH 4.19 15/48] net: Fix data-races around sysctl_mem.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ]

While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 7d3a4c2eea95..98946f90781d 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1381,7 +1381,7 @@ void __sk_mem_reclaim(struct sock *sk, int amount);
 /* sysctl_mem values are in pages, we convert them in SK_MEM_QUANTUM units */
 static inline long sk_prot_mem_limits(const struct sock *sk, int index)
 {
-	long val = sk->sk_prot->sysctl_mem[index];
+	long val = READ_ONCE(sk->sk_prot->sysctl_mem[index]);
 
 #if PAGE_SIZE > SK_MEM_QUANTUM
 	val <<= PAGE_SHIFT - SK_MEM_QUANTUM_SHIFT;
-- 
2.35.1

[PATCH 4.19 16/48] cipso: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ]

While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/ip-sysctl.txt |  2 +-
 net/ipv4/cipso_ipv4.c                  | 12 +++++++-----
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 3c617d620b6f..ae56957f51e4 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -810,7 +810,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index e8b8dd1cb157..8dcf9aec7b77 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -254,7 +254,7 @@ static int cipso_v4_cache_check(const unsigned char *key,
 	struct cipso_v4_map_cache_entry *prev_entry = NULL;
 	u32 hash;
 
-	if (!cipso_v4_cache_enabled)
+	if (!READ_ONCE(cipso_v4_cache_enabled))
 		return -ENOENT;
 
 	hash = cipso_v4_map_cache_hash(key, key_len);
@@ -311,13 +311,14 @@ static int cipso_v4_cache_check(const unsigned char *key,
 int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 		       const struct netlbl_lsm_secattr *secattr)
 {
+	int bkt_size = READ_ONCE(cipso_v4_cache_bucketsize);
 	int ret_val = -EPERM;
 	u32 bkt;
 	struct cipso_v4_map_cache_entry *entry = NULL;
 	struct cipso_v4_map_cache_entry *old_entry = NULL;
 	u32 cipso_ptr_len;
 
-	if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0)
+	if (!READ_ONCE(cipso_v4_cache_enabled) || bkt_size <= 0)
 		return 0;
 
 	cipso_ptr_len = cipso_ptr[1];
@@ -337,7 +338,7 @@ int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 
 	bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1);
 	spin_lock_bh(&cipso_v4_cache[bkt].lock);
-	if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) {
+	if (cipso_v4_cache[bkt].size < bkt_size) {
 		list_add(&entry->list, &cipso_v4_cache[bkt].list);
 		cipso_v4_cache[bkt].size += 1;
 	} else {
@@ -1214,7 +1215,8 @@ static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def,
 		/* This will send packets using the "optimized" format when
 		 * possible as specified in  section 3.4.2.6 of the
 		 * CIPSO draft. */
-		if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10)
+		if (READ_ONCE(cipso_v4_rbm_optfmt) && ret_val > 0 &&
+		    ret_val <= 10)
 			tag_len = 14;
 		else
 			tag_len = 4 + ret_val;
@@ -1617,7 +1619,7 @@ int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option)
 			 * all the CIPSO validations here but it doesn't
 			 * really specify _exactly_ what we need to validate
 			 * ... so, just make it a sysctl tunable. */
-			if (cipso_v4_rbm_strictvalid) {
+			if (READ_ONCE(cipso_v4_rbm_strictvalid)) {
 				if (cipso_v4_map_lvl_valid(doi_def,
 							   tag[3]) < 0) {
 					err_offset = opt_iter + 3;
-- 
2.35.1

[PATCH 4.19 17/48] icmp: Fix data-races around sysctl.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ]

While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index fe10a565b7d8..953cc70851cf 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -266,11 +266,12 @@ bool icmp_global_allow(void)
 	spin_lock(&icmp_global.lock);
 	delta = min_t(u32, now - icmp_global.stamp, HZ);
 	if (delta >= HZ / 50) {
-		incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
+		incr = READ_ONCE(sysctl_icmp_msgs_per_sec) * delta / HZ;
 		if (incr)
 			WRITE_ONCE(icmp_global.stamp, now);
 	}
-	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
+	credit = min_t(u32, icmp_global.credit + incr,
+		       READ_ONCE(sysctl_icmp_msgs_burst));
 	if (credit) {
 		/* We want to use a credit of one in average, but need to randomize
 		 * it for security reasons.
-- 
2.35.1

[PATCH 4.19 18/48] ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

[Greg Kroah-Hartman]

From: Michal Suchanek <msuchanek@suse.de>

[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ]

The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.

Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 84cd9c061227..afc94dbc0752 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -170,7 +170,7 @@ &spi0 {
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
-- 
2.35.1

[PATCH 4.19 19/48] icmp: Fix a data-race around sysctl_icmp_ratelimit.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 2a4eb714841f288cf51c7d942d98af6a8c6e4b01 ]

While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 953cc70851cf..eb29da8971e1 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -333,7 +333,8 @@ static bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
 
 	vif = l3mdev_master_ifindex(dst->dev);
 	peer = inet_getpeer_v4(net->ipv4.peers, fl4->daddr, vif, 1);
-	rc = inet_peer_xrlim_allow(peer, net->ipv4.sysctl_icmp_ratelimit);
+	rc = inet_peer_xrlim_allow(peer,
+				   READ_ONCE(net->ipv4.sysctl_icmp_ratelimit));
 	if (peer)
 		inet_putpeer(peer);
 out:
-- 
2.35.1

[PATCH 4.19 20/48] icmp: Fix a data-race around sysctl_icmp_ratemask.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ]

While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index eb29da8971e1..aa179e6461e1 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -295,7 +295,7 @@ static bool icmpv4_mask_allow(struct net *net, int type, int code)
 		return true;
 
 	/* Limit if icmp type is enabled in ratemask. */
-	if (!((1 << type) & net->ipv4.sysctl_icmp_ratemask))
+	if (!((1 << type) & READ_ONCE(net->ipv4.sysctl_icmp_ratemask)))
 		return true;
 
 	return false;
-- 
2.35.1

[PATCH 4.19 21/48] ipv4: Fix data-races around sysctl_ip_dynaddr.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit e49e4aff7ec19b2d0d0957ee30e93dade57dab9e ]

While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/ip-sysctl.txt | 2 +-
 net/ipv4/af_inet.c                     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ae56957f51e4..e315e6052b9f 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -887,7 +887,7 @@ ip_nonlocal_bind - BOOLEAN
 	which can be quite useful - but may break some applications.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index d8c22246629a..dadd42a07c07 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1209,7 +1209,7 @@ static int inet_sk_reselect_saddr(struct sock *sk)
 	if (new_saddr == old_saddr)
 		return 0;
 
-	if (sock_net(sk)->ipv4.sysctl_ip_dynaddr > 1) {
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) > 1) {
 		pr_info("%s(): shifting inet->saddr from %pI4 to %pI4\n",
 			__func__, &old_saddr, &new_saddr);
 	}
@@ -1264,7 +1264,7 @@ int inet_sk_rebuild_header(struct sock *sk)
 		 * Other protocols have to map its equivalent state to TCP_SYN_SENT.
 		 * DCCP maps its DCCP_REQUESTING state to TCP_SYN_SENT. -acme
 		 */
-		if (!sock_net(sk)->ipv4.sysctl_ip_dynaddr ||
+		if (!READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) ||
 		    sk->sk_state != TCP_SYN_SENT ||
 		    (sk->sk_userlocks & SOCK_BINDADDR_LOCK) ||
 		    (err = inet_sk_reselect_saddr(sk)) != 0)
-- 
2.35.1

[PATCH 4.19 22/48] sfc: fix use after free when disabling sriov

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]

Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.

Set the pointer to NULL at release time to not trying to read it later.

Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs

 BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]

 Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
  efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
  efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k

 allocated by task 6771 on cpu 10 at 3137.860196s:
  pci_alloc_dev+0x21/0x60
  pci_iov_add_virtfn+0x2a2/0x320
  sriov_enable+0x212/0x3e0
  efx_ef10_sriov_configure+0x67/0x80 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xba/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 freed by task 6771 on cpu 12 at 3170.991309s:
  device_release+0x34/0x90
  kobject_cleanup+0x3a/0x130
  pci_iov_remove_virtfn+0xd9/0x120
  sriov_disable+0x30/0xe0
  efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index f074986a13b1..fc3cb26f7112 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -415,8 +415,9 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
+	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	unsigned int vfs_assigned = pci_vfs_assigned(dev);
-	int rc = 0;
+	int i, rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -424,10 +425,13 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 		return -EBUSY;
 	}
 
-	if (!vfs_assigned)
+	if (!vfs_assigned) {
+		for (i = 0; i < efx->vf_count; i++)
+			nic_data->vf[i].pci_dev = NULL;
 		pci_disable_sriov(dev);
-	else
+	} else {
 		rc = -EBUSY;
+	}
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
-- 
2.35.1

[PATCH 4.19 23/48] seg6: fix skb checksum evaluation in SRH encapsulation/insertion

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ]

Support for SRH encapsulation and insertion was introduced with
commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and
injection with lwtunnels"), through the seg6_do_srh_encap() and
seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with
the SRH, while the latter inserts the SRH between the IPv6 header and
the payload. Then, the headers are initialized/updated according to the
operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied
to the headers.

The IPv6 payload length ('payload_len') is not initialized
within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e.
the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the
'payload_len' is updated only after the checksum is evaluated.

To solve this issue, the initialization of the IPv6 payload length is
moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}()
functions and before the skb checksum update takes place.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6_iptunnel.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 26882fd9323a..2e90672852c8 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -176,6 +176,8 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, tot_len);
 
 	return 0;
@@ -228,6 +230,8 @@ int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, sizeof(struct ipv6hdr) + hdrlen);
 
 	return 0;
@@ -289,7 +293,6 @@ static int seg6_do_srh(struct sk_buff *skb)
 		break;
 	}
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return 0;
-- 
2.35.1

[PATCH 4.19 24/48] seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ]

The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions
seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the
packet within an outer IPv6 header with the specified Segment Routing
Header (SRH); ii) insert the specified SRH directly after the IPv6
header of the packet.

This patch removes the initialization of the IPv6 header payload length
from the input_action_end_b6{_encap}() functions, as it is now handled
properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb
checksum.

Fixes: 140f04c33bbc ("ipv6: sr: implement several seg6local actions")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6_local.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/ipv6/seg6_local.c b/net/ipv6/seg6_local.c
index 607709a8847c..18970f6a68c6 100644
--- a/net/ipv6/seg6_local.c
+++ b/net/ipv6/seg6_local.c
@@ -415,7 +415,6 @@ static int input_action_end_b6(struct sk_buff *skb, struct seg6_local_lwt *slwt)
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
@@ -447,7 +446,6 @@ static int input_action_end_b6_encap(struct sk_buff *skb,
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
-- 
2.35.1

[PATCH 4.19 25/48] seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

[Greg Kroah-Hartman]

From: Andrea Mayer <andrea.mayer@uniroma2.it>

[ Upstream commit 4889fbd98deaf243c3baadc54e296d71c6af1eb0 ]

Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use
the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment
Routing Header (SRH) or insert an SRH between the IPv6 header and the
payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap()
which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the
required operation (i.e. encap/inline).

This patch removes the initialization of the IPv6 header payload length
from bpf_push_seg6_encap(), as it is now handled properly by
seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.

Fixes: fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index c1310c9d1b90..5129e89f52bb 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4570,7 +4570,6 @@ static int bpf_push_seg6_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len
 	if (err)
 		return err;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return seg6_lookup_nexthop(skb, NULL, 0);
-- 
2.35.1

[PATCH 4.19 26/48] sfc: fix kernel panic when creating VF

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]

When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
  BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
 kernel BUG at mm/vmalloc.c:2727!
 invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...

Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 6b0a4dc1ced1..5462827d9cbb 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -2059,7 +2059,10 @@ static int efx_ef10_try_update_nic_stats_vf(struct efx_nic *efx)
 
 	efx_update_sw_stats(efx, stats);
 out:
+	/* releasing a DMA coherent buffer with BH disabled can panic */
+	spin_unlock_bh(&efx->stats_lock);
 	efx_nic_free_buffer(efx, &stats_buf);
+	spin_lock_bh(&efx->stats_lock);
 	return rc;
 }
 
-- 
2.35.1

[PATCH 4.19 27/48] virtio_mmio: Add missing PM calls to freeze/restore

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]

Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.

This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.

Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index c69c755bf553..79474bd0c52c 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -66,6 +66,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
@@ -508,6 +509,25 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.bus_name	= vm_bus_name,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int virtio_mmio_freeze(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_freeze(&vm_dev->vdev);
+}
+
+static int virtio_mmio_restore(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_restore(&vm_dev->vdev);
+}
+
+static const struct dev_pm_ops virtio_mmio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(virtio_mmio_freeze, virtio_mmio_restore)
+};
+#endif
 
 static void virtio_mmio_release_dev(struct device *_d)
 {
@@ -761,6 +781,9 @@ static struct platform_driver virtio_mmio_driver = {
 		.name	= "virtio-mmio",
 		.of_match_table	= virtio_mmio_match,
 		.acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &virtio_mmio_pm_ops,
+#endif
 	},
 };
 
-- 
2.35.1

[PATCH 4.19 28/48] virtio_mmio: Restore guest page size on resume

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]

Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.

This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 79474bd0c52c..17cd682acc22 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -521,6 +521,9 @@ static int virtio_mmio_restore(struct device *dev)
 {
 	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
 
+	if (vm_dev->version == 1)
+		writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
 	return virtio_device_restore(&vm_dev->vdev);
 }
 
-- 
2.35.1

[PATCH 4.19 29/48] netfilter: br_netfilter: do not skip all hooks with 0 priority

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit c2577862eeb0be94f151f2f1fff662b028061b00 ]

When br_netfilter module is loaded, skbs may be diverted to the
ipv4/ipv6 hooks, just like as if we were routing.

Unfortunately, bridge filter hooks with priority 0 may be skipped
in this case.

Example:
1. an nftables bridge ruleset is loaded, with a prerouting
   hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.

After 1) the only registered hook is the bridge prerouting hook, but its
not called yet because the bridge hasn't been brought up yet.

After 2), hook order is:
   0 br_nf_pre_routing // br_netfilter internal hook
   0 chain bridge f prerouting // nftables bridge ruleset

The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.

But if its enabled, br_nf_hook_thresh() will skip it because it assumes
that all 0-priority hooks had been called previously in bridge context.

To avoid this, check for the br_nf_pre_routing hook itself, we need to
resume directly after it, even if this hook has a priority of 0.

Unfortunately, this still results in different packet flow.
With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge

but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)

Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority
so that it will be called later in the pipeline, but this also impacts
ebtables evaluation order, and would still result in this very ordering
problem for all nftables-bridge hooks with the same priority as the
br_nf_pre_routing one.

Searching back through the git history I don't think this has
ever behaved in any other way, hence, no fixes-tag.

Reported-by: Radim Hrazdil <rhrazdil@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 4b9d1d6bbf6f..55c7cdf5e7b8 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -1001,9 +1001,24 @@ int br_nf_hook_thresh(unsigned int hook, struct net *net,
 		return okfn(net, sk, skb);
 
 	ops = nf_hook_entries_get_hook_ops(e);
-	for (i = 0; i < e->num_hook_entries &&
-	      ops[i]->priority <= NF_BR_PRI_BRNF; i++)
-		;
+	for (i = 0; i < e->num_hook_entries; i++) {
+		/* These hooks have already been called */
+		if (ops[i]->priority < NF_BR_PRI_BRNF)
+			continue;
+
+		/* These hooks have not been called yet, run them. */
+		if (ops[i]->priority > NF_BR_PRI_BRNF)
+			break;
+
+		/* take a closer look at NF_BR_PRI_BRNF. */
+		if (ops[i]->hook == br_nf_pre_routing) {
+			/* This hook diverted the skb to this function,
+			 * hooks after this have not been run yet.
+			 */
+			i++;
+			break;
+		}
+	}
 
 	nf_hook_state_init(&state, hook, NFPROTO_BRIDGE, indev, outdev,
 			   sk, net, okfn);
-- 
2.35.1

[PATCH 4.19 30/48] cpufreq: pmac32-cpufreq: Fix refcount leak bug

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ]

In pmac_cpufreq_init_MacRISC3(), we need to add corresponding
of_node_put() for the three node pointers whose refcount have
been incremented by of_find_node_by_name().

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pmac32-cpufreq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index e225edb5c359..ce0dda1a4241 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -474,6 +474,10 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (slew_done_gpio_np)
 		slew_done_gpio = read_gpio(slew_done_gpio_np);
 
+	of_node_put(volt_gpio_np);
+	of_node_put(freq_gpio_np);
+	of_node_put(slew_done_gpio_np);
+
 	/* If we use the frequency GPIOs, calculate the min/max speeds based
 	 * on the bus frequencies
 	 */
-- 
2.35.1

[PATCH 4.19 31/48] platform/x86: hp-wmi: Ignore Sanitization Mode event

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ]

After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0

According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.

Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp-wmi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 93fadd4abf14..f911410bb4c7 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -75,6 +75,7 @@ enum hp_wmi_event_ids {
 	HPWMI_BACKLIT_KB_BRIGHTNESS	= 0x0D,
 	HPWMI_PEAKSHIFT_PERIOD		= 0x0F,
 	HPWMI_BATTERY_CHARGE_PERIOD	= 0x10,
+	HPWMI_SANITIZATION_MODE		= 0x17,
 };
 
 struct bios_args {
@@ -631,6 +632,8 @@ static void hp_wmi_notify(u32 value, void *context)
 		break;
 	case HPWMI_BATTERY_CHARGE_PERIOD:
 		break;
+	case HPWMI_SANITIZATION_MODE:
+		break;
 	default:
 		pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
 		break;
-- 
2.35.1

[PATCH 4.19 32/48] net: tipc: fix possible refcount leak in tipc_sk_create()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 00aff3590fc0a73bddd3b743863c14e76fd35c0c ]

Free sk in case tipc_sk_insert() fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 6c18b4565ab5..8266452c143b 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -453,6 +453,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
 	sock_init_data(sock, sk);
 	tipc_set_sk_state(sk, TIPC_OPEN);
 	if (tipc_sk_insert(tsk)) {
+		sk_free(sk);
 		pr_warn("Socket create failed; port number exhausted\n");
 		return -EINVAL;
 	}
-- 
2.35.1

[PATCH 4.19 33/48] NFC: nxp-nci: dont print header length mismatch on i2c error

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nxp-nci/i2c.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -138,7 +138,9 @@ static int nxp_nci_i2c_fw_read(struct nx
 	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
 
 	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
-	if (r != frame_len) {
+	if (r < 0) {
+		goto fw_read_exit_free_skb;
+	} else if (r != frame_len) {
 		nfc_err(&client->dev,
 			"Invalid frame length: %u (expected %zu)\n",
 			r, frame_len);
@@ -182,7 +184,9 @@ static int nxp_nci_i2c_nci_read(struct n
 		return 0;
 
 	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
-	if (r != header.plen) {
+	if (r < 0) {
+		goto nci_read_exit_free_skb;
+	} else if (r != header.plen) {
 		nfc_err(&client->dev,
 			"Invalid frame payload length: %u (expected %u)\n",
 			r, header.plen);

[PATCH 4.19 34/48] net: sfp: fix memory leak in sfp_probe()

[Greg Kroah-Hartman]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit 0a18d802d65cf662644fd1d369c86d84a5630652 ]

sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.

We should use devm_add_action_or_reset() instead of devm_add_action().

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 71bafc8f5ed0..e7af73ad8a44 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1811,7 +1811,7 @@ static int sfp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sfp);
 
-	err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
+	err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp);
 	if (err < 0)
 		return err;
 
-- 
2.35.1

[PATCH 4.19 35/48] ASoC: ops: Fix off by one in range control validation

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 5871321fb4558c55bf9567052b618ff0be6b975e ]

We currently report that range controls accept a range of 0..(max-min) but
accept writes in the range 0..(max-min+1). Remove that extra +1.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220604105246.4055214-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 7a37312c8e0c..453b61b42dd9 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -530,7 +530,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 		return -EINVAL;
 	if (mc->platform_max && tmp > mc->platform_max)
 		return -EINVAL;
-	if (tmp > mc->max - mc->min + 1)
+	if (tmp > mc->max - mc->min)
 		return -EINVAL;
 
 	if (invert)
@@ -551,7 +551,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 			return -EINVAL;
 		if (mc->platform_max && tmp > mc->platform_max)
 			return -EINVAL;
-		if (tmp > mc->max - mc->min + 1)
+		if (tmp > mc->max - mc->min)
 			return -EINVAL;
 
 		if (invert)
-- 
2.35.1

[PATCH 4.19 36/48] ASoC: wm5110: Fix DRE control

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ]

The DRE controls on wm5110 should return a value of 1 if the DRE state
is actually changed, update to fix this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm5110.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index b0789a03d699..e510aca55163 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -414,6 +414,7 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	unsigned int rnew = (!!ucontrol->value.integer.value[1]) << mc->rshift;
 	unsigned int lold, rold;
 	unsigned int lena, rena;
+	bool change = false;
 	int ret;
 
 	snd_soc_dapm_mutex_lock(dapm);
@@ -441,8 +442,8 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 		goto err;
 	}
 
-	ret = regmap_update_bits(arizona->regmap, ARIZONA_DRE_ENABLE,
-				 mask, lnew | rnew);
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_DRE_ENABLE,
+				       mask, lnew | rnew, &change);
 	if (ret) {
 		dev_err(arizona->dev, "Failed to set DRE: %d\n", ret);
 		goto err;
@@ -455,6 +456,9 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	if (!rnew && rold)
 		wm5110_clear_pga_volume(arizona, mc->rshift);
 
+	if (change)
+		ret = 1;
+
 err:
 	snd_soc_dapm_mutex_unlock(dapm);
 
-- 
2.35.1

[PATCH 4.19 37/48] irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

[Greg Kroah-Hartman]

From: Stafford Horne <shorne@gmail.com>

[ Upstream commit 8520501346ed8d1c4a6dfa751cb57328a9c843f1 ]

The mask_ack operation clears the interrupt by writing to the PICSR
register.  This we don't want for level triggered interrupt because
it does not actually clear the interrupt on the source hardware.

This was causing issues in qemu with multi core setups where
interrupts would continue to fire even though they had been cleared in
PICSR.

Just remove the mask_ack operation.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-or1k-pic.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/irqchip/irq-or1k-pic.c b/drivers/irqchip/irq-or1k-pic.c
index dd9d5d12fea2..05931fdedbb9 100644
--- a/drivers/irqchip/irq-or1k-pic.c
+++ b/drivers/irqchip/irq-or1k-pic.c
@@ -70,7 +70,6 @@ static struct or1k_pic_dev or1k_pic_level = {
 		.name = "or1k-PIC-level",
 		.irq_unmask = or1k_pic_unmask,
 		.irq_mask = or1k_pic_mask,
-		.irq_mask_ack = or1k_pic_mask_ack,
 	},
 	.handle = handle_level_irq,
 	.flags = IRQ_LEVEL | IRQ_NOPROBE,
-- 
2.35.1

[PATCH 4.19 38/48] x86: Clear .brk area at early boot

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ]

The .brk section has the same properties as .bss: it is an alloc-only
section and should be cleared before being used.

Not doing so is especially a problem for Xen PV guests, as the
hypervisor will validate page tables (check for writable page tables
and hypervisor private bits) before accepting them to be used.

Make sure .brk is initially zero by letting clear_bss() clear the brk
area, too.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/head64.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 88dc38b4a147..90c2613af36b 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -383,6 +383,8 @@ static void __init clear_bss(void)
 {
 	memset(__bss_start, 0,
 	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
+	memset(__brk_base, 0,
+	       (unsigned long) __brk_limit - (unsigned long) __brk_base);
 }
 
 static unsigned long get_cmd_line_ptr(void)
-- 
2.35.1

[PATCH 4.19 39/48] ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

[Greg Kroah-Hartman]

From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

[ Upstream commit 78ece8cce1ba0c3f3e5a7c6c1b914b3794f04c44 ]

The peripheral clock of CEC is not LSE but CEC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 4278a4b22860..7c5b2727ba2e 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -413,7 +413,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
-- 
2.35.1

[PATCH 4.19 40/48] signal handling: dont use BUG_ON() for debugging

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ]

These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/signal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 4cc3f3ba13a9..c79b87ac1041 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1825,12 +1825,12 @@ bool do_notify_parent(struct task_struct *tsk, int sig)
 	bool autoreap = false;
 	u64 utime, stime;
 
-	BUG_ON(sig == -1);
+	WARN_ON_ONCE(sig == -1);
 
- 	/* do_notify_parent_cldstop should have been called instead.  */
- 	BUG_ON(task_is_stopped_or_traced(tsk));
+	/* do_notify_parent_cldstop should have been called instead.  */
+	WARN_ON_ONCE(task_is_stopped_or_traced(tsk));
 
-	BUG_ON(!tsk->ptrace &&
+	WARN_ON_ONCE(!tsk->ptrace &&
 	       (tsk->group_leader != tsk || !thread_group_empty(tsk)));
 
 	if (sig != SIGCHLD) {
-- 
2.35.1

[PATCH 4.19 41/48] USB: serial: ftdi_sio: add Belimo device ids

[Greg Kroah-Hartman]

From: Lucien Buchmann <lucien.buchmann@gmx.net>

commit 7c239a071d1f04b7137789810807b4108d475c72 upstream.

Those two product ids are known.

Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 9 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1013,6 +1013,9 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+	/* Belimo Automation devices */
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
 	/* ICP DAS I-756xU devices */
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1569,6 +1569,12 @@
 #define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
 
 /*
+ * Belimo Automation
+ */
+#define BELIMO_ZTH_PID			0x8050
+#define BELIMO_ZIP_PID			0xC811
+
+/*
  * Unjo AB
  */
 #define UNJO_VID			0x22B7

[PATCH 4.19 42/48] usb: typec: add missing uevent when partner support PD

[Greg Kroah-Hartman]

From: Linyu Yuan <quic_linyyuan@quicinc.com>

commit 6fb9e1d94789e8ee5a258a23bc588693f743fd6c upstream.

System like Android allow user control power role from UI, it is possible
to implement application base on typec uevent to refresh UI, but found
there is chance that UI show different state from typec attribute file.

In typec_set_pwr_opmode(), when partner support PD, there is no uevent
send to user space which cause the problem.

Fix it by sending uevent notification when change power mode to PD.

Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers")
Cc: stable@vger.kernel.org
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1656662934-10226-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1377,6 +1377,7 @@ void typec_set_pwr_opmode(struct typec_p
 			partner->usb_pd = 1;
 			sysfs_notify(&partner_dev->kobj, NULL,
 				     "supports_usb_power_delivery");
+			kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE);
 		}
 		put_device(partner_dev);
 	}

[PATCH 4.19 43/48] usb: dwc3: gadget: Fix event pending check

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream.

The DWC3_EVENT_PENDING flag is used to protect against invalid call to
top-half interrupt handler, which can occur when there's a delay in
software detection of the interrupt line deassertion.

However, the clearing of this flag was done prior to unmasking the
interrupt line, creating opportunity where the top-half handler can
come. This breaks the serialization and creates a race between the
top-half and bottom-half handler, resulting in losing synchronization
between the controller and the driver when processing events.

To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at
the end of the bottom-half handler.

Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3187,7 +3187,6 @@ static irqreturn_t dwc3_process_event_bu
 	}
 
 	evt->count = 0;
-	evt->flags &= ~DWC3_EVENT_PENDING;
 	ret = IRQ_HANDLED;
 
 	/* Unmask interrupt */
@@ -3200,6 +3199,9 @@ static irqreturn_t dwc3_process_event_bu
 		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
 	}
 
+	/* Keep the clearing of DWC3_EVENT_PENDING at the end */
+	evt->flags &= ~DWC3_EVENT_PENDING;
+
 	return ret;
 }
 

[PATCH 4.19 44/48] tty: serial: samsung_tty: set dma burst_size to 1

[Greg Kroah-Hartman]

From: Chanho Park <chanho61.park@samsung.com>

commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream.

The src_maxburst and dst_maxburst have been changed to 1 but the settings
of the UCON register aren't changed yet. They should be changed as well
according to the dmaengine slave config.

Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc: stable <stable@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -238,8 +238,7 @@ static void enable_tx_dma(struct s3c24xx
 	/* Enable tx dma mode */
 	ucon = rd_regl(port, S3C2410_UCON);
 	ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
-	ucon |= (dma_get_cache_alignment() >= 16) ?
-		S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+	ucon |= S3C64XX_UCON_TXBURST_1;
 	ucon |= S3C64XX_UCON_TXMODE_DMA;
 	wr_regl(port,  S3C2410_UCON, ucon);
 
@@ -512,7 +511,7 @@ static void enable_rx_dma(struct s3c24xx
 			S3C64XX_UCON_DMASUS_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
 			S3C64XX_UCON_RXMODE_MASK);
-	ucon |= S3C64XX_UCON_RXBURST_16 |
+	ucon |= S3C64XX_UCON_RXBURST_1 |
 			0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 			S3C64XX_UCON_EMPTYINT_EN |
 			S3C64XX_UCON_TIMEOUT_EN |

[PATCH 4.19 45/48] serial: 8250: fix return error code in serial8250_request_std_resource()

[Greg Kroah-Hartman]

From: Yi Yang <yiyang13@huawei.com>

commit 6e690d54cfa802f939cefbd2fa2c91bd0b8bd1b6 upstream.

If port->mapbase = NULL in serial8250_request_std_resource() , it need
return a error code instead of 0. If uart_set_info() fail to request new
regions by serial8250_request_std_resource() but the return value of
serial8250_request_std_resource() is 0, The system incorrectly considers
that the resource application is successful and does not attempt to
restore the old setting. A null pointer reference is triggered when the
port resource is later invoked.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2917,8 +2917,10 @@ static int serial8250_request_std_resour
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;

[PATCH 4.19 46/48] serial: stm32: Clear prev values before setting RTS delays

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit 5c5f44e36217de5ead789ff25da71c31c2331c96 upstream.

The code lacks clearing of previous DEAT/DEDT values. Thus, changing
values on the fly results in garbage delays tending towards the maximum
value as more and more bits are ORed together. (Leaving RS485 mode
would have cleared the old values though).

Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/stm32-usart.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -72,6 +72,8 @@ static void stm32_config_reg_rs485(u32 *
 	*cr3 |= USART_CR3_DEM;
 	over8 = *cr1 & USART_CR1_OVER8;
 
+	*cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
+
 	if (over8)
 		rs485_deat_dedt = delay_ADE * baud * 8;
 	else

[PATCH 4.19 47/48] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit 211565b100993c90b53bf40851eacaefc830cfe0 upstream.

The driver must provide throttle and unthrottle in uart_ops when it
sets UPSTAT_AUTORTS. Add them using existing stop_rx &
enable_interrupts functions.

Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status)
Cc: stable <stable@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/amba-pl011.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1335,6 +1335,15 @@ static void pl011_stop_rx(struct uart_po
 	pl011_dma_rx_stop(uap);
 }
 
+static void pl011_throttle_rx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pl011_stop_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static void pl011_enable_ms(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1728,9 +1737,10 @@ static int pl011_allocate_irq(struct uar
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned long flags;
 	unsigned int i;
 
-	spin_lock_irq(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1752,7 +1762,14 @@ static void pl011_enable_interrupts(stru
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+	pl011_enable_interrupts(uap);
 }
 
 static int pl011_startup(struct uart_port *port)
@@ -2127,6 +2144,8 @@ static const struct uart_ops amba_pl011_
 	.stop_tx	= pl011_stop_tx,
 	.start_tx	= pl011_start_tx,
 	.stop_rx	= pl011_stop_rx,
+	.throttle	= pl011_throttle_rx,
+	.unthrottle	= pl011_unthrottle_rx,
 	.enable_ms	= pl011_enable_ms,
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,

[PATCH 4.19 48/48] can: m_can: m_can_tx_handler(): fix use after free of skb

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.

can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.

Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/m_can/m_can.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1438,8 +1438,6 @@ static netdev_tx_t m_can_start_xmit(stru
 					 M_CAN_FIFO_DATA(i / 4),
 					 *(u32 *)(cf->data + i));
 
-		can_put_echo_skb(skb, dev, 0);
-
 		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
 			cccr = m_can_read(priv, M_CAN_CCCR);
 			cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
@@ -1456,6 +1454,9 @@ static netdev_tx_t m_can_start_xmit(stru
 			m_can_write(priv, M_CAN_CCCR, cccr);
 		}
 		m_can_write(priv, M_CAN_TXBTIE, 0x1);
+
+		can_put_echo_skb(skb, dev, 0);
+
 		m_can_write(priv, M_CAN_TXBAR, 0x1);
 		/* End of xmit function for version 3.0.x */
 	} else {

Re: [PATCH 4.19 00/48] 4.19.253-rc1 review

[Samuel Zou]

On 2022/7/19 19:53, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.253 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.253-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.253-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.253-rc1
Commit: 7e891ca4fbed75e8d86f1221c9b3f8151a0e847c
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8946
passed: 8946
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8946
passed: 8946
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 00/48] 4.19.253-rc1 review

[Guenter Roeck]

On Tue, Jul 19, 2022 at 01:53:37PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.253 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 425 pass: 425 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/48] 4.19.253-rc1 review

[Jon Hunter]

On Tue, 19 Jul 2022 13:53:37 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.253 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.253-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.253-rc1-g8b84863f2dd5
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/48] 4.19.253-rc1 review

[Naresh Kamboju]

On Tue, 19 Jul 2022 at 17:29, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.253 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.253-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.253-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: 8b84863f2dd59d1663d4c8a38cf7a59fdef04dfc
* git describe: v4.19.252-49-g8b84863f2dd5
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.252-49-g8b84863f2dd5

## Test Regressions (compared to v4.19.252)
No test regressions found.

## Metric Regressions (compared to v4.19.252)
No metric regressions found.

## Test Fixes (compared to v4.19.252)
No test fixes found.

## Metric Fixes (compared to v4.19.252)
No metric fixes found.

## Test result summary
total: 113490, pass: 100359, fail: 274, skip: 11697, xfail: 1160

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 286 passed, 5 failed
* arm64: 58 total, 57 passed, 1 failed
* i386: 26 total, 25 passed, 1 failed
* mips: 35 total, 35 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 52 total, 51 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/48] 4.19.253-rc1 review

[Sudip Mukherjee (Codethink)]

Hi Greg,

On Tue, Jul 19, 2022 at 01:53:37PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.253 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220706):
mips: 63 configs -> no  failure
arm: 115 configs -> no failure
arm64: 2 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/1519


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip