* [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library
@ 2022-07-26 22:13 Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 01/10] testcases/lib: Implement tst_cgctl binary Luke Nowakowski-Krijger
` (10 more replies)
0 siblings, 11 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update the remaining tests and shell library expansion after review.
Rebased off of accepted tst_cgroup changes in previous patchset version.
Luke Nowakowski-Krijger (10):
testcases/lib: Implement tst_cgctl binary
controllers: Expand cgroup_lib shell library
controllers: Update cgroup_fj_* to use newer cgroup lib and test lib
controllers: Update memcg_control_test to newer test lib and cgroup
lib
controllers: Update memcg/regression/* to new test and cgroup lib
controllers: Update memcg_stress_test to use newer cgroup lib
controllers: update memcg/functional to use newer cgroup lib
controllers: Update pids.sh to use newer cgroup lib
controllers: update cpuset_regression_test.sh to use newer cgroup lib
controllers: update cgroup_regression_test to use newer cgroup lib
.../cgroup/cgroup_regression_test.sh | 31 +--
.../controllers/cgroup_fj/cgroup_fj_common.sh | 115 +++-------
.../cgroup_fj/cgroup_fj_function.sh | 173 ++++++++-------
.../controllers/cgroup_fj/cgroup_fj_proc.c | 24 +--
.../controllers/cgroup_fj/cgroup_fj_stress.sh | 171 ++++++++-------
testcases/kernel/controllers/cgroup_lib.sh | 137 ++++++++++--
.../cpuset/cpuset_regression_test.sh | 26 +--
.../controllers/memcg/control/mem_process.c | 28 +--
.../memcg/control/memcg_control_test.sh | 149 ++++---------
.../memcg/functional/memcg_force_empty.sh | 2 +-
.../controllers/memcg/functional/memcg_lib.sh | 54 ++---
.../memcg/regression/memcg_regression_test.sh | 203 +++++++++---------
.../memcg/regression/memcg_test_1.c | 40 ++--
.../memcg/regression/memcg_test_2.c | 24 +--
.../memcg/regression/memcg_test_3.c | 37 ++--
.../memcg/regression/memcg_test_4.c | 24 +--
.../memcg/regression/memcg_test_4.sh | 50 ++---
.../memcg/stress/memcg_stress_test.sh | 32 ++-
testcases/kernel/controllers/pids/pids.sh | 67 +-----
testcases/lib/Makefile | 2 +-
testcases/lib/tst_cgctl.c | 87 ++++++++
21 files changed, 690 insertions(+), 786 deletions(-)
create mode 100644 testcases/lib/tst_cgctl.c
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 01/10] testcases/lib: Implement tst_cgctl binary
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (9 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Implement a binary utility that creates an interface to make calls to
the cgroup C API.
This will effectively allow shell scripts to make calls to the cgroup C
api.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v2->v6: Added cgctl_usage() and replaced define string usage with
function.
testcases/lib/Makefile | 2 +-
testcases/lib/tst_cgctl.c | 87 +++++++++++++++++++++++++++++++++++++++
2 files changed, 88 insertions(+), 1 deletion(-)
create mode 100644 testcases/lib/tst_cgctl.c
diff --git a/testcases/lib/Makefile b/testcases/lib/Makefile
index f2de0c832..f4f8c8524 100644
--- a/testcases/lib/Makefile
+++ b/testcases/lib/Makefile
@@ -12,6 +12,6 @@ MAKE_TARGETS := tst_sleep tst_random tst_checkpoint tst_rod tst_kvcmp\
tst_device tst_net_iface_prefix tst_net_ip_prefix tst_net_vars\
tst_getconf tst_supported_fs tst_check_drivers tst_get_unused_port\
tst_get_median tst_hexdump tst_get_free_pids tst_timeout_kill\
- tst_check_kconfigs
+ tst_check_kconfigs tst_cgctl
include $(top_srcdir)/include/mk/generic_leaf_target.mk
diff --git a/testcases/lib/tst_cgctl.c b/testcases/lib/tst_cgctl.c
new file mode 100644
index 000000000..8ef615a56
--- /dev/null
+++ b/testcases/lib/tst_cgctl.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2022 Canonical Ltd.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include "tst_cgroup.h"
+
+static void cgctl_usage(void)
+{
+ fprintf(stderr, "Usage: tst_cgctl require [controller] [test_pid]\n\tcleanup [config (output of tst_cg_print_config)]\n\tprint\n\t help\n");
+}
+
+static int cgctl_require(const char *ctrl, int test_pid)
+{
+ struct tst_cg_opts opts;
+
+ memset(&opts, 0, sizeof(opts));
+ opts.test_pid = test_pid;
+
+ tst_cg_require(ctrl, &opts);
+ tst_cg_print_config();
+
+ return 0;
+}
+
+static int cgctl_cleanup(const char *const config)
+{
+ tst_cg_scan();
+ tst_cg_load_config(config);
+ tst_cg_cleanup();
+
+ return 0;
+}
+
+static int cgctl_print(void)
+{
+ tst_cg_scan();
+ tst_cg_print_config();
+
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ int test_pid;
+ const char *cmd_name = argv[1];
+
+ if (argc < 2)
+ goto error;
+
+ if (!strcmp(cmd_name, "require")) {
+ if (argc != 4)
+ goto arg_num_error;
+ test_pid = atoi(argv[3]);
+ if (!test_pid) {
+ fprintf(stderr, "tst_cgctl: Invalid test_pid '%s' given\n",
+ argv[3]);
+ goto error;
+ }
+ return cgctl_require(argv[2], test_pid);
+ } else if (!strcmp(cmd_name, "cleanup")) {
+ if (argc != 3)
+ goto arg_num_error;
+ return cgctl_cleanup(argv[2]);
+ } else if (!strcmp(cmd_name, "print")) {
+ return cgctl_print();
+ } else if (!strcmp(cmd_name, "help")) {
+ cgctl_usage();
+ return 0;
+ }
+
+ fprintf(stderr, "tst_cgctl: Unknown command '%s' given\n", cmd_name);
+ goto error;
+
+arg_num_error:
+ fprintf(stderr,
+ "tst_cgctl: Invalid number of arguments given for command '%s'\n",
+ cmd_name);
+error:
+ cgctl_usage();
+ return 1;
+}
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 01/10] testcases/lib: Implement tst_cgctl binary Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-27 12:20 ` Petr Vorel
2022-07-26 22:13 ` [LTP] [PATCH v6 03/10] controllers: Update cgroup_fj_* to use newer cgroup lib and test lib Luke Nowakowski-Krijger
` (8 subsequent siblings)
10 siblings, 1 reply; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Expand the cgroup_lib library by using the tst_cgctl binary
utility to make calls to the Cgroup C API to simplify and centralize the
mounting and cleanup process of Cgroups
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v5->v6: Added $ret to capture return code and added return $ret
after tst_brk calls.
testcases/kernel/controllers/cgroup_lib.sh | 137 ++++++++++++++++++---
1 file changed, 117 insertions(+), 20 deletions(-)
diff --git a/testcases/kernel/controllers/cgroup_lib.sh b/testcases/kernel/controllers/cgroup_lib.sh
index 56c9a7521..5fe2252be 100644
--- a/testcases/kernel/controllers/cgroup_lib.sh
+++ b/testcases/kernel/controllers/cgroup_lib.sh
@@ -2,38 +2,135 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (c) 2019-2022 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2018-2019 ARM Ltd. All Rights Reserved.
+# Copyright (c) 2022 Canonical Ltd.
-# Find mountpoint to given subsystem
-# get_cgroup_mountpoint SUBSYSTEM
-# RETURN: 0 if mountpoint found, otherwise 1
-get_cgroup_mountpoint()
+_cgroup_state=
+
+# Find mountpoint of the given controller
+# USAGE: cgroup_get_mountpoint CONTROLLER
+# RETURNS: Prints the mountpoint of the given controller
+# Must call cgroup_require before calling
+cgroup_get_mountpoint()
+{
+ local ctrl="$1"
+ local mountpoint
+
+ [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_mountpoint: controller not defined"
+ [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_mountpoint: No previous state found. Forgot to call cgroup_require?"
+
+ mountpoint=$(echo "$_cgroup_state" | grep -w "^$ctrl" | awk '{ print $4 }')
+ echo "$mountpoint"
+
+ return 0
+}
+
+# Get the test path of a given controller that has been created by the cgroup C API
+# USAGE: cgroup_get_test_path CONTROLLER
+# RETURNS: Prints the path to the test direcory
+# Must call cgroup_require before calling
+cgroup_get_test_path()
+{
+ local ctrl="$1"
+ local mountpoint
+ local test_path
+
+ [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_test_path: controller not defined"
+ [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_test_path: No previous state found. Forgot to call cgroup_require?"
+
+ mountpoint=$(cgroup_get_mountpoint "$ctrl")
+
+ test_path="$mountpoint/ltp/test-$$"
+
+ [ ! -e "$test_path" ] && tst_brk TBROK "cgroup_get_test_path: No test path found. Forgot to call cgroup_require?"
+
+ echo "$test_path"
+
+ return 0
+}
+
+# Gets the cgroup version of the given controller
+# USAGE: cgroup_get_version CONTROLLER
+# RETURNS: "1" if version 1 and "2" if version 2
+# Must call cgroup_require before calling
+cgroup_get_version()
{
- local subsystem=$1
- local mntpoint
+ local ctrl="$1"
+ local version
- [ $# -eq 0 ] && tst_brk TBROK "get_cgroup_mountpoint: subsystem not defined"
+ [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_version: controller not defined"
+ [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_version: No previous state found. Forgot to call cgroup_require?"
- mntpoint=$(grep cgroup /proc/mounts | grep -w $subsystem | awk '{ print $2 }')
- [ -z "$mntpoint" ] && return 1
+ version=$(echo "$_cgroup_state" | grep -w "^$ctrl" | awk '{ print $2 }')
+ [ "$version" = "" ] && tst_brk TBROK "cgroup_get_version: Could not find controller $ctrl"
+
+ echo "$version"
- echo $mntpoint
return 0
}
-# Check if given subsystem is supported and enabled
-# is_cgroup_subsystem_available_and_enabled SUBSYSTEM
-# RETURN: 0 if subsystem supported and enabled, otherwise 1
-is_cgroup_subsystem_available_and_enabled()
+# Cleans up any setup done by calling cgroup_require.
+# USAGE: cgroup_cleanup
+# Can be safely called even when no setup has been done
+cgroup_cleanup()
{
- local val
- local subsystem=$1
+ [ "$_cgroup_state" = "" ] && return 0
- [ $# -eq 0 ] && tst_brk TBROK "is_cgroup_subsystem_available_and_enabled: subsystem not defined"
+ ROD tst_cgctl cleanup "$_cgroup_state"
- val=$(grep -w $subsystem /proc/cgroups | awk '{ print $4 }')
- [ "$val" = "1" ] && return 0
+ _cgroup_state=
- return 1
+ return 0
+}
+
+# Get the task list of the given controller
+# USAGE: cgroup_get_task_list CONTROLLER
+# RETURNS: prints out "cgroup.procs" if version 2 otherwise "tasks"
+# Must call cgroup_require before calling
+cgroup_get_task_list()
+{
+ local ctrl="$1"
+ local version
+
+ [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_task_list: controller not defined"
+
+ version=$(cgroup_get_version "$ctrl")
+
+ if [ "$version" = "2" ]; then
+ echo "cgroup.procs"
+ else
+ echo "tasks"
+ fi
+
+ return 0
+}
+
+# Mounts and configures the given controller
+# USAGE: cgroup_require CONTROLLER
+cgroup_require()
+{
+ local ctrl="$1"
+ local ret
+
+ [ $# -eq 0 ] && tst_brk TBROK "cgroup_require: controller not defined"
+
+ [ ! -f /proc/cgroups ] && tst_brk TCONF "Kernel does not support control groups"
+
+ _cgroup_state=$(tst_cgctl require "$ctrl" $$)
+ ret=$?
+
+ if [ $ret -eq 32 ]; then
+ tst_brk TCONF "'tst_cgctl require' exited. Controller is probably not available?"
+ return $ret
+ fi
+
+ if [ $ret -ne 0 ]; then
+ tst_brk TBROK "'tst_cgctl require' exited."
+ return $ret
+ fi
+
+ [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_require: No state was set after call to tst_cgctl require?"
+
+ return 0
}
. tst_test.sh
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 03/10] controllers: Update cgroup_fj_* to use newer cgroup lib and test lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 01/10] testcases/lib: Implement tst_cgctl binary Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 04/10] controllers: Update memcg_control_test to newer test lib and cgroup lib Luke Nowakowski-Krijger
` (7 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update the cgroup_fj_* tests to use the newer test lib and to use the
updated version of the cgroup lib which handles mounting and unmounting
for both v1 and v2 controllers.
The tests were modified to accommodate testing the v2 controller
interfaces where it still made sense, and in other places tests were
skipped as they were testing using specific parts of the v1 interface
that doesn't exist on v2 controllers.
Also updated the licensing info at the beginning of the file with SPDX
license identifier.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: Added $pid check in cleanup function in case setup fails
and pid is not set
.../controllers/cgroup_fj/cgroup_fj_common.sh | 115 ++++--------
.../cgroup_fj/cgroup_fj_function.sh | 173 ++++++++++--------
.../controllers/cgroup_fj/cgroup_fj_proc.c | 24 +--
.../controllers/cgroup_fj/cgroup_fj_stress.sh | 171 +++++++++--------
4 files changed, 219 insertions(+), 264 deletions(-)
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_common.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_common.sh
index 53ab637e8..6d5586534 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_common.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_common.sh
@@ -1,43 +1,17 @@
#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) 2009 FUJITSU LIMITED ##
-## Author: Shi Weihua <shiwh@cn.fujitsu.com> ##
-## Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com> ##
-## Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz> ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software Foundation, ##
-## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2009 FUJITSU LIMITED
+# Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com>
+# Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz>
+# Author: Shi Weihua <shiwh@cn.fujitsu.com>
for arg; do
TCID="${TCID}_$arg"
done
-. test.sh
-
-exist_subsystem()
-{
- local subsystem="$1"
- local exist=`grep -w $subsystem /proc/cgroups | cut -f1`
-
- if [ -z "$exist" ]; then
- tst_brkm TCONF "Subsystem $subsystem not supported"
- fi
-}
+TST_NEEDS_CMDS="rmdir killall"
+TST_NEEDS_ROOT=1
+TST_NEEDS_TMPDIR=1
attach_and_check()
{
@@ -46,13 +20,13 @@ attach_and_check()
local task
shift
- tst_resm TINFO "Attaching task $pid to $path"
+ tst_res TINFO "Attaching task $pid to $path"
- ROD echo "$pid" \> "$path/tasks"
+ ROD echo "$pid" \> "$path/$task_list"
- for task in $(cat "$path/tasks"); do
+ for task in $(cat "$path/$task_list"); do
if [ "$task" -ne "$pid" ]; then
- tst_resm TINFO "Unexpected pid $task in $path/tasks, expected $pid"
+ tst_res TINFO "Unexpected pid $task in $path/$task_list, expected $pid"
return 1
fi
done
@@ -64,11 +38,13 @@ create_subgroup()
{
path="$1"
- ROD mkdir "$path"
+ [ ! -d "$path" ] && ROD mkdir "$path"
# cpuset.cpus and cpuset.mems must be initialized with suitable value
- # before any pids are attached
- if [ "$subsystem" = "cpuset" ]; then
+ # before any pids are attached.
+ # Only needs to be done for cgroup v1 as sets are inherited from parents
+ # by default in cgroup v2.
+ if [ "$cgroup_version" = "1" ] && [ "$subsystem" = "cpuset" ]; then
if [ -e "$mount_point/cpus" ]; then
ROD cat "$mount_point/cpus" \> "$path/cpus"
ROD cat "$mount_point/mems" \> "$path/mems"
@@ -79,54 +55,27 @@ create_subgroup()
fi
}
-
-setup()
+common_setup()
{
- tst_require_root
- tst_require_cmds killall
-
- if [ ! -f /proc/cgroups ]; then
- tst_brkm TCONF "Kernel does not support for control groups"
- fi
-
- exist_subsystem "$subsystem"
-
- tst_tmpdir
- TST_CLEANUP=cleanup
-
- mount_point=`grep -w $subsystem /proc/mounts | grep -w "cgroup" | \
- cut -f 2 | cut -d " " -f2`
-
- if [ -z "$mount_point" ]; then
- try_umount=1
- mount_point="/dev/cgroup"
- tst_resm TINFO "Subsystem $subsystem is not mounted, mounting it at $mount_point"
- ROD mkdir $mount_point
- ROD mount -t cgroup -o "$subsystem" "ltp_cgroup" "$mount_point"
- else
- tst_resm TINFO "Subsystem $subsystem is mounted at $mount_point"
- fi
+ cgroup_require "$subsystem"
+ mount_point=$(cgroup_get_mountpoint "$subsystem")
+ start_path=$(cgroup_get_test_path "$subsystem")
+ cgroup_version=$(cgroup_get_version "$subsystem")
+ task_list=$(cgroup_get_task_list "$subsystem")
+
+ [ "$cgroup_version" = "2" ] && ROD echo "+$subsystem" \> "$start_path/cgroup.subtree_control"
+ tst_res TINFO "test starts with cgroup version $cgroup_version"
}
-cleanup()
+common_cleanup()
{
- tst_rmdir
-
killall -9 cgroup_fj_proc >/dev/null 2>&1
- tst_resm TINFO "Removing all ltp subgroups..."
-
- find "$mount_point/ltp/" -depth -type d -exec rmdir '{}' \;
+ tst_res TINFO "Removing all ltp subgroups..."
- if [ -z "$try_umount" ]; then
- return
- fi
-
- if grep -q "$mount_point" /proc/mounts; then
- EXPECT_PASS umount "$mount_point"
- fi
+ [ -d "$start_path" ] && find "$start_path" -depth -type d -exec rmdir '{}' \;
- if [ -e "$mount_point" ]; then
- EXPECT_PASS rmdir "$mount_point"
- fi
+ cgroup_cleanup
}
+
+. cgroup_lib.sh
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
index fc3ad1b63..b0c9410ca 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
@@ -1,32 +1,16 @@
#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) 2009 FUJITSU LIMITED ##
-## Author: Shi Weihua <shiwh@cn.fujitsu.com> ##
-## Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com> ##
-## Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz> ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software Foundation, ##
-## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2009 FUJITSU LIMITED
+# Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com>
+# Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz>
+# Author: Shi Weihua <shiwh@cn.fujitsu.com>
TCID="cgroup_fj_function2"
-TST_TOTAL=7
-
-. cgroup_fj_common.sh
+TST_TESTFUNC=test
+TST_SETUP=setup
+TST_CLEANUP=cleanup
+TST_CNT=9
+TST_POS_ARGS=1
subsystem=$1
@@ -36,7 +20,7 @@ usage_and_exit()
echo " ./cgroup_fj_function2.sh subsystem"
echo "example: ./cgroup_fj_function2.sh cpuset"
- tst_brkm TBROK "$1"
+ tst_brk TBROK "$1"
}
if [ "$#" -ne "1" ]; then
@@ -46,49 +30,67 @@ fi
# Move a task from group to group
test1()
{
+ # mv'ing cgroups is not available in cgroup2
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
if ! attach_and_check "$pid" "$start_path/ltp_1"; then
- tst_resm TFAIL "Failed to attach task"
+ tst_res TFAIL "Failed to attach task"
return
fi
if ! attach_and_check "$pid" "$start_path"; then
- tst_resm TFAIL "Failed to attach task"
+ tst_res TFAIL "Failed to attach task"
return
fi
- tst_resm TPASS "Task attached succesfully"
+ tst_res TPASS "Task attached successfully"
}
# Group can be renamed with mv
test2()
{
+ # mv'ing cgroups is not available in cgroup2
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
create_subgroup "$start_path/ltp_2"
if ! mv "$start_path/ltp_2" "$start_path/ltp_3"; then
- tst_resm TFAIL "Failed to move $start_path/ltp_2 to $start_path/ltp_3"
+ tst_res TFAIL "Failed to move $start_path/ltp_2 to $start_path/ltp_3"
rmdir "$start_path/ltp_2"
return
fi
if ! rmdir "$start_path/ltp_3"; then
- tst_resm TFAIL "Failed to remove $start_path/ltp_3"
+ tst_res TFAIL "Failed to remove $start_path/ltp_3"
return
fi
- tst_resm TPASS "Successfully moved $start_path/ltp_2 to $start_path/ltp_3"
+ tst_res TPASS "Successfully moved $start_path/ltp_2 to $start_path/ltp_3"
}
# Group can be renamed with mv unless the target name exists
test3()
{
+ # mv'ing cgroups is not available in cgroup2
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
create_subgroup "$start_path/ltp_2"
if mv "$start_path/ltp_2" "$start_path/ltp_1" > /dev/null 2>&1; then
- tst_resm TFAIL "Moved $start_path/ltp_2 over existing $start_path/ltp_1"
+ tst_res TFAIL "Moved $start_path/ltp_2 over existing $start_path/ltp_1"
return
fi
- tst_resm TPASS "Failed to move $start_path/ltp_2 over existing $start_path/ltp_1"
+ tst_res TPASS "Failed to move $start_path/ltp_2 over existing $start_path/ltp_1"
ROD rmdir "$start_path/ltp_2"
}
@@ -97,77 +99,104 @@ test3()
test4()
{
if ! attach_and_check "$pid" "$start_path/ltp_1"; then
- tst_resm TFAIL "Failed to attach $pid to $start_path/ltp_1"
+ tst_res TFAIL "Failed to attach $pid to $start_path/ltp_1"
return
fi
if rmdir "$start_path/ltp_1" > /dev/null 2>&1; then
- tst_resm TFAIL "Removed $start_path/ltp_1 which contains task $pid"
- create_subgroup "$start_path/ltp_1"
+ tst_res TFAIL "Removed $start_path/ltp_1 which contains task $pid"
return
fi
- tst_resm TPASS "Group $start_path/ltp_1 with task $pid cannot be removed"
+ tst_res TPASS "Group $start_path/ltp_1 with task $pid cannot be removed"
}
# Group with a subgroup cannot be removed
test5()
{
+ # We need to move the tasks back to root to create a subgroup
+ if [ "$cgroup_version" = "2" ]; then
+ for pid in $(cat "$start_path/ltp_1/$task_list"); do
+ echo $pid > "$mount_point/$task_list" 2> /dev/null
+ done
+
+ ROD echo "+$subsystem" \> "$start_path/ltp_1/cgroup.subtree_control"
+ fi
+
create_subgroup "$start_path/ltp_1/a"
if rmdir "$start_path/ltp_1" > /dev/null 2>&1; then
- tst_resm TFAIL "Removed $start_path/ltp_1 which contains subdir 'a'"
+ tst_res TFAIL "Removed $start_path/ltp_1 which contains subdir 'a'"
return
fi
- tst_resm TPASS "Dir $start_path/ltp_1 with subdir 'a' cannot be removed"
+ tst_res TPASS "Dir $start_path/ltp_1 with subdir 'a' cannot be removed"
ROD rmdir "$start_path/ltp_1/a"
- ROD echo "$pid" \> "$start_path/tasks"
+ [ "$cgroup_version" = "2" ] && ROD echo "-$subsystem" \> "$start_path/ltp_1/cgroup.subtree_control"
+ ROD echo "$pid" \> "$start_path/ltp_1/$task_list"
}
# Group cannot be moved outside of hierarchy
test6()
{
+ # mv'ing cgroups is not available in cgroup2
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
if mv "$start_path/ltp_1" "$PWD/ltp" > /dev/null 2>&1; then
- tst_resm TFAIL "Subgroup $start_path/ltp_1 outside hierarchy to $PWD/ltp"
+ tst_res TFAIL "Subgroup $start_path/ltp_1 outside hierarchy to $PWD/ltp"
return
fi
- tst_resm TPASS "Subgroup $start_path/ltp_1 cannot be moved to $PWD/ltp"
+ tst_res TPASS "Subgroup $start_path/ltp_1 cannot be moved to $PWD/ltp"
}
# Tasks file cannot be removed
test7()
{
- if rm "$start_path/ltp_1/tasks" > /dev/null 2>&1; then
- tst_resm TFAIL "Tasks file $start_path/ltp_1/tasks could be removed"
+ if rm "$start_path/ltp_1/$task_list" > /dev/null 2>&1; then
+ tst_res TFAIL "Tasks file $start_path/ltp_1/$task_list could be removed"
return
fi
- tst_resm TPASS "Tasks file $start_path/ltp_1/tasks cannot be removed"
+ tst_res TPASS "Tasks file $start_path/ltp_1/tasks cannot be removed"
}
# Test notify_on_release with invalid inputs
test8()
{
+ # notify_on_release is not available in cgroup2 so skip the test
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
if echo "-1" > "$start_path/ltp_1/notify_on_release" 2>/dev/null; then
- tst_resm TFAIL "Can write -1 to $start_path/ltp_1/notify_on_release"
+ tst_res TFAIL "Can write -1 to $start_path/ltp_1/notify_on_release"
return
fi
if echo "ltp" > "$start_path/ltp_1/notify_on_release" 2>/dev/null; then
- tst_resm TFAIL "Can write ltp to $start_path/ltp_1/notify_on_release"
+ tst_res TFAIL "Can write ltp to $start_path/ltp_1/notify_on_release"
return
fi
- tst_resm TPASS "Cannot write invalid values to $start_path/ltp_1/notify_on_release"
+ tst_res TPASS "Cannot write invalid values to $start_path/ltp_1/notify_on_release"
}
# Test that notify_on_release can be changed
test9()
{
+ # notify_on_release is not available in cgroup2 so skip the test
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Controller mounted on cgroup2 hierarchy, skipping test"
+ return
+ fi
+
local notify=$(ROD cat "$start_path/ltp_1/notify_on_release")
local value
@@ -178,37 +207,33 @@ test9()
fi
if ! echo "$value" > "$start_path/ltp_1/notify_on_release"; then
- tst_resm TFAIL "Failed to set $start_path/ltp_1/notify_on_release to $value"
+ tst_res TFAIL "Failed to set $start_path/ltp_1/notify_on_release to $value"
return
fi
ROD echo "$notify" \> "$start_path/ltp_1/notify_on_release"
- tst_resm TPASS "Set $start_path/ltp_1/notify_on_release to $value"
+ tst_res TPASS "Set $start_path/ltp_1/notify_on_release to $value"
}
-setup
-
-cgroup_fj_proc&
-pid=$!
-
-start_path="$mount_point/ltp"
-
-create_subgroup "$start_path"
-create_subgroup "$start_path/ltp_1"
+setup()
+{
+ common_setup
+ cgroup_fj_proc&
+ pid=$!
+ create_subgroup "$start_path/ltp_1"
+}
-test1
-test2
-test3
-test4
-test5
-test6
-test7
-test8
-test9
+cleanup()
+{
+ if [ -n "$pid" ]; then
+ kill -9 $pid >/dev/null 2>&1
+ wait $pid >/dev/null 2>&1
+ fi
-ROD kill -9 $pid
-wait $pid
-ROD rmdir "$start_path/ltp_1"
+ rmdir "$start_path/ltp_1" >/dev/null 2>&1
+ common_cleanup
+}
-tst_exit
+. cgroup_fj_common.sh
+tst_run
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_proc.c b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_proc.c
index 93bc8b744..e3c1153cb 100644
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_proc.c
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_proc.c
@@ -1,24 +1,6 @@
-/******************************************************************************/
-/* */
-/* Copyright (c) 2009 FUJITSU LIMITED */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation; either version 2 of the License, or */
-/* (at your option) any later version. */
-/* */
-/* This program is distributed in the hope that it will be useful, */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
-/* the GNU General Public License for more details. */
-/* */
-/* You should have received a copy of the GNU General Public License */
-/* along with this program; if not, write to the Free Software */
-/* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
-/* */
-/* Author: Shi Weihua <shiwh@cn.fujitsu.com> */
-/* */
-/******************************************************************************/
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2009 FUJITSU LIMITED
+// Author: Shi Weihua <shiwh@cn.fujitsu.com>
#include <sys/types.h>
#include <sys/wait.h>
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
index 01c2517c9..d80b83bbd 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
@@ -1,32 +1,16 @@
#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) 2009 FUJITSU LIMITED ##
-## Author: Shi Weihua <shiwh@cn.fujitsu.com> ##
-## Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com> ##
-## Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz> ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software Foundation, ##
-## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2009 FUJITSU LIMITED
+# Copyright (c) 2015 Cedric Hnyda <chnyda@suse.com>
+# Copyright (c) 2015-2016 Cyril Hrubis <chrubis@suse.cz>
+# Author: Shi Weihua <shiwh@cn.fujitsu.com>
TCID="cgroup_fj_stress"
-TST_TOTAL=1
-
-. cgroup_fj_common.sh
+TST_CNT=1
+TST_TESTFUNC=test
+TST_SETUP=setup
+TST_CLEANUP=cleanup
+TST_POS_ARGS=4
subsystem="$1"
subgroup_num="$2"
@@ -47,35 +31,9 @@ usage_and_exit()
echo " each - attach process to each subgroup"
echo "example: ./cgroup_fj_stress.sh cpuset 1 1 one"
echo
- tst_brkm TBROK "$1"
+ tst_brk TBROK "$1"
}
-if [ "$#" -ne "4" ]; then
- usage_and_exit "Wrong number of parameters, expected 4"
-fi
-
-case $subgroup_num in
- ''|*[!0-9]*) usage_and_exit "Number of subgroups must be positive integer";;
- *) ;;
-esac
-
-case $subgroup_depth in
- ''|*[!0-9]*) usage_and_exit "Depth of the subgroup tree must be positive integer";;
- *) ;;
-esac
-
-case $attach_operation in
- 'none'|'one'|'each');;
- *) usage_and_exit "Invalid attach operation: $attach_operation";;
-esac
-
-setup
-
-export TMPFILE=./tmp_tasks.$$
-
-count=0
-collected_pids=
-
build_subgroups()
{
local cur_path="$1"
@@ -87,6 +45,12 @@ build_subgroups()
fi
create_subgroup "$cur_path"
+
+ # We can only attach processes to the leaves of the tree in cgroup v2 which
+ # means we need to enable the controllers everywhere inbetween.
+ if [ "$cgroup_version" = "2" ] && [ "$cur_depth" -ne "$subgroup_depth" ]; then
+ ROD echo "+$subsystem" \> "$cur_path/cgroup.subtree_control"
+ fi
count=$((count+1))
for i in $(seq 1 $subgroup_num); do
@@ -113,8 +77,10 @@ attach_task()
pid="$ppid"
fi
- if ! attach_and_check "$pid" "$cur_path"; then
+ if [ "$cgroup_version" = "2" ] && [ $cur_depth -eq $subgroup_depth ] || [ "$cgroup_version" = "1" ]; then
+ if ! attach_and_check "$pid" "$cur_path"; then
fail=1
+ fi
fi
for i in $(seq 1 $subgroup_num); do
@@ -123,46 +89,79 @@ attach_task()
done
if [ -n "$ppid" ]; then
- if ! attach_and_check "$pid" "$cur_path"; then
- fail=1
+ if [ "$cgroup_version" = "2" ] && [ $cur_depth -eq $subgroup_depth ] || [ "$cgroup_version" = "1" ]; then
+ if ! attach_and_check "$pid" "$cur_path"; then
+ fail=1
+ fi
fi
fi
}
-start_path="$mount_point/ltp"
+setup()
+{
+ export TMPFILE=./tmp_tasks.$$
+ count=0
+ collected_pids=
+
+ case $subgroup_num in
+ ''|*[!0-9]*) usage_and_exit "Number of subgroups must be possitive integer";;
+ *) ;;
+ esac
+
+ case $subgroup_depth in
+ ''|*[!0-9]*) usage_and_exit "Depth of the subgroup tree must be possitive integer";;
+ *) ;;
+ esac
+
+ case $attach_operation in
+ 'none'|'one'|'each');;
+ *) usage_and_exit "Invalid attach operation: $attach_operation";;
+ esac
+
+ common_setup
+}
-tst_resm TINFO "Creating subgroups ..."
+cleanup()
+{
+ common_cleanup
+}
+
+test()
+{
+ tst_res TINFO "Creating subgroups ..."
-build_subgroups "$start_path" 0
+ build_subgroups "$start_path" 0
-tst_resm TINFO "... mkdired $count times"
+ tst_res TINFO "... mkdired $count times"
-case $attach_operation in
-"one" )
- cgroup_fj_proc &
- pid=$!
+ case $attach_operation in
+ "one" )
+ cgroup_fj_proc &
+ pid=$!
- tst_resm TINFO "Moving one task around"
- attach_task "$start_path" 0 "$pid"
- ROD kill -9 "$pid"
- wait "$pid"
- ;;
-"each" )
- tst_resm TINFO "Attaching task to each subgroup"
- attach_task "$start_path" 0
- for pid in $collected_pids; do
+ tst_res TINFO "Moving one task around"
+ attach_task "$start_path" 0 "$pid"
ROD kill -9 "$pid"
wait "$pid"
- done
- ;;
-* )
- ;;
-esac
-
-if [ -n "$fail" ]; then
- tst_resm TFAIL "Attaching tasks failed!"
-else
- tst_resm TPASS "All done!"
-fi
-
-tst_exit
+ ;;
+ "each" )
+ tst_res TINFO "Attaching task to each subgroup"
+ attach_task "$start_path" 0
+ for pid in $collected_pids; do
+ ROD kill -9 "$pid"
+ wait "$pid"
+ done
+ ;;
+ * )
+ ;;
+ esac
+
+ if [ -n "$fail" ]; then
+ tst_res TFAIL "Attaching tasks failed!"
+ else
+ tst_res TPASS "All done!"
+ fi
+}
+
+. cgroup_fj_common.sh
+tst_run
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 04/10] controllers: Update memcg_control_test to newer test lib and cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (2 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 03/10] controllers: Update cgroup_fj_* to use newer cgroup lib and test lib Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 05/10] controllers: Update memcg/regression/* to new test " Luke Nowakowski-Krijger
` (6 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update memcg_control_test to use the newer test lib and to use the newer
cgroup lib which enables the memory v1 and v2 controller to be tested.
Also updated to newer SPDX license identifier.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: None
.../controllers/memcg/control/mem_process.c | 28 +---
.../memcg/control/memcg_control_test.sh | 149 +++++-------------
2 files changed, 39 insertions(+), 138 deletions(-)
diff --git a/testcases/kernel/controllers/memcg/control/mem_process.c b/testcases/kernel/controllers/memcg/control/mem_process.c
index 6c1b36ca6..8ecabb272 100644
--- a/testcases/kernel/controllers/memcg/control/mem_process.c
+++ b/testcases/kernel/controllers/memcg/control/mem_process.c
@@ -1,28 +1,6 @@
-/*****************************************************************************/
-/* */
-/* Copyright (c) 2010 Mohamed Naufal Basheer */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation; either version 2 of the License, or */
-/* (at your option) any later version. */
-/* */
-/* This program is distributed in the hope that it will be useful, */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
-/* the GNU General Public License for more details. */
-/* */
-/* You should have received a copy of the GNU General Public License */
-/* along with this program; if not, write to the Free Software */
-/* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
-/* */
-/* File: mem_process.c */
-/* */
-/* Purpose: act as a memory hog for the memcg_control tests */
-/* */
-/* Author: Mohamed Naufal Basheer <naufal11@gmail.com > */
-/* */
-/*****************************************************************************/
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2010 Mohamed Naufal Basheer
+// Author: Mohamed Naufal Basheer
#include <sys/types.h>
#include <sys/mman.h>
diff --git a/testcases/kernel/controllers/memcg/control/memcg_control_test.sh b/testcases/kernel/controllers/memcg/control/memcg_control_test.sh
index 4d9f1bb5d..f96ed3abb 100644
--- a/testcases/kernel/controllers/memcg/control/memcg_control_test.sh
+++ b/testcases/kernel/controllers/memcg/control/memcg_control_test.sh
@@ -1,45 +1,14 @@
#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2010 Mohamed Naufal Basheer
+# Author: Mohamed Naufal Basheer
-################################################################################
-## ##
-## Copyright (c) 2010 Mohamed Naufal Basheer ##
-## ##
-## This program is free software; you can redistribute it and/or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, ##
-## but WITHOUT ANY WARRANTY; without even the implied warranty of ##
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ##
-## the GNU General Public License for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-## File: memcg_control_test.sh ##
-## ##
-## Purpose: Implement various memory controller tests ##
-## ##
-## Author: Mohamed Naufal Basheer <naufal11@gmail.com> ##
-## ##
-################################################################################
-
-if [ "x$(grep -w memory /proc/cgroups | cut -f4)" != "x1" ]; then
- echo "WARNING:"
- echo "Either kernel does not support memory resource controller or feature not enabled"
- echo "Skipping all memcg_control testcases...."
- exit 0
-fi
-
-export TCID="memcg_control"
-export TST_TOTAL=1
-export TST_COUNT=0
-
-export TMP=${TMP:-/tmp}
-cd $TMP
+TST_TESTFUNC=test
+TST_SETUP=setup
+TST_CLEANUP=cleanup
+TST_CNT=1
+TST_NEEDS_ROOT=1
+TST_NEEDS_TMPDIR=1
PAGE_SIZE=$(tst_getconf PAGESIZE)
@@ -47,20 +16,14 @@ TOT_MEM_LIMIT=$PAGE_SIZE
ACTIVE_MEM_LIMIT=$PAGE_SIZE
PROC_MEM=$((PAGE_SIZE * 2))
-TST_PATH=$PWD
-STATUS_PIPE="$TMP/status_pipe"
-
-PASS=0
-FAIL=1
+STATUS_PIPE="status_pipe"
# Check if the test process is killed on crossing boundary
test_proc_kill()
{
- cd $TMP
mem_process -m $PROC_MEM &
- cd $OLDPWD
sleep 1
- echo $! > tasks
+ ROD echo $! > "$test_dir/$task_list"
#Instruct the test process to start acquiring memory
echo m > $STATUS_PIPE
@@ -77,87 +40,47 @@ test_proc_kill()
}
# Validate the memory usage limit imposed by the hierarchically topmost group
-testcase_1()
+test1()
{
- TST_COUNT=1
- tst_resm TINFO "Test #1: Checking if the memory usage limit imposed by the topmost group is enforced"
+ cd $TST_TMPDIR
+
+ tst_res TINFO "Test #1: Checking if the memory usage limit imposed by the topmost group is enforced"
- echo "$ACTIVE_MEM_LIMIT" > $TST_PATH/mnt/$TST_NUM/memory.limit_in_bytes
- echo "$TOT_MEM_LIMIT" > $TST_PATH/mnt/$TST_NUM/memory.memsw.limit_in_bytes
+ ROD echo "$ACTIVE_MEM_LIMIT" > "$test_dir/$memory_limit"
+ ROD echo "$TOT_MEM_LIMIT" > "$test_dir/$memsw_memory_limit"
- mkdir sub
- (cd sub
KILLED_CNT=0
test_proc_kill
if [ $PROC_MEM -gt $TOT_MEM_LIMIT ] && [ $KILLED_CNT -eq 0 ]; then
- result $FAIL "Test #1: failed"
+ tst_res TFAIL "Test #1: failed"
else
- result $PASS "Test #1: passed"
- fi)
- rmdir sub
+ tst_res TPASS "Test #1: passed"
+ fi
}
-# Record the test results
-#
-# $1: Result of the test case, $PASS or $FAIL
-# $2: Output information
-result()
+setup()
{
- RES=$1
- INFO=$2
-
- if [ $RES -eq $PASS ]; then
- tst_resm TPASS "$INFO"
+ cgroup_require "memory"
+ cgroup_version=$(cgroup_get_version "memory")
+ test_dir=$(cgroup_get_test_path "memory")
+ task_list=$(cgroup_get_task_list "memory")
+
+ if [ "$cgroup_version" = "2" ]; then
+ memory_limit="memory.max"
+ memsw_memory_limit="memory.swap.max"
else
- : $((FAILED_CNT += 1))
- tst_resm TFAIL "$INFO"
+ memory_limit="memory.limit_in_bytes"
+ memsw_memory_limit="memory.memsw.limit_in_bytes"
fi
-}
-cleanup()
-{
- if [ -e $TST_PATH/mnt ]; then
- umount $TST_PATH/mnt 2> /dev/null
- rm -rf $TST_PATH/mnt
- fi
+ tst_res TINFO "Test starts with cgroup version $cgroup_version"
}
-do_mount()
+cleanup()
{
- cleanup
-
- mkdir $TST_PATH/mnt
- mount -t cgroup -o memory cgroup $TST_PATH/mnt 2> /dev/null
- if [ $? -ne 0 ]; then
- tst_brkm TBROK NULL "Mounting cgroup to temp dir failed"
- rmdir $TST_PATH/mnt
- exit 1
- fi
+ cgroup_cleanup
}
-do_mount
-
-echo 1 > mnt/memory.use_hierarchy 2> /dev/null
-
-FAILED_CNT=0
-
-TST_NUM=1
-while [ $TST_NUM -le $TST_TOTAL ]; do
- mkdir $TST_PATH/mnt/$TST_NUM
- (cd $TST_PATH/mnt/$TST_NUM && testcase_$TST_NUM)
- rmdir $TST_PATH/mnt/$TST_NUM
- : $((TST_NUM += 1))
-done
-
-echo 0 > mnt/memory.use_hierarchy 2> /dev/null
-
-cleanup
-
-if [ "$FAILED_CNT" -ne 0 ]; then
- tst_resm TFAIL "memcg_control: failed"
- exit 1
-else
- tst_resm TPASS "memcg_control: passed"
- exit 0
-fi
+. cgroup_lib.sh
+tst_run
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 05/10] controllers: Update memcg/regression/* to new test and cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (3 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 04/10] controllers: Update memcg_control_test to newer test lib and cgroup lib Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 06/10] controllers: Update memcg_stress_test to use newer " Luke Nowakowski-Krijger
` (5 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update the tests in memcg/regression/* to use the new test lib and the
newer cgroup lib to enable testing when either v1 or v2 memory
controller is mounted. Only some tests still made sense to be testing
with the v2 memory controller, otherwise they were skipped.
Also updated to the newer SPDX license identifier.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: Added newline after decleration to fix checkpatch complaint
.../memcg/regression/memcg_regression_test.sh | 203 +++++++++---------
.../memcg/regression/memcg_test_1.c | 40 ++--
.../memcg/regression/memcg_test_2.c | 24 +--
.../memcg/regression/memcg_test_3.c | 37 ++--
.../memcg/regression/memcg_test_4.c | 24 +--
.../memcg/regression/memcg_test_4.sh | 50 ++---
6 files changed, 160 insertions(+), 218 deletions(-)
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh b/testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
index c91a4069e..bc8a1c661 100755
--- a/testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
+++ b/testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
@@ -1,50 +1,16 @@
#! /bin/sh
-
-################################################################################
-## ##
-## Copyright (c) 2009 FUJITSU LIMITED ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## Author: Li Zefan <lizf@cn.fujitsu.com> ##
-## Added memcg enable/disable functinality: Rishikesh K Rajak ##
-## <risrajak@linux.vnet.ibm.com ##
-## ##
-################################################################################
-
-cd $LTPROOT/testcases/bin
-
-export TCID="memcg_regression_test"
-export TST_TOTAL=4
-export TST_COUNT=1
-
-if [ "$(id -ru)" != 0 ]; then
- tst_brkm TBROK ignored "Test must be run as root"
- exit 0
-fi
-
-if [ "x$(grep -w memory /proc/cgroups | cut -f4)" != "x1" ]; then
- tst_resm TCONF "Either memory resource controller kernel support absent"
- tst_resm TCONF "or feature is not enabled; skipping all memcgroup testcases."
- exit 0
-fi
-
-if tst_kvcmp -lt "2.6.30"; then
- tst_brkm TBROK ignored "Test should be run with kernel 2.6.30 or newer"
- exit 0
-fi
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2009 FUJITSU LIMITED
+# Author: Li Zefan <lizf@cn.fujitsu.com>
+# Added memcg enable/disable functionality: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+
+TST_ID="memcg_regression_test"
+TST_CLEANUP=cleanup
+TST_SETUP=setup
+TST_TESTFUNC=test_
+TST_NEEDS_ROOT=1
+TST_NEEDS_CMDS="killall kill"
+TST_CNT=4
#buffer can rotate and number of found bugs can actually go down
#so clear the buffer to avoid this
@@ -70,16 +36,16 @@ check_kernel_bug()
# some kernel bug is detected
if [ $new_bug -gt $nr_bug ]; then
- tst_resm TFAIL "kernel BUG was detected!"
+ tst_res TFAIL "kernel BUG was detected!"
fi
if [ $new_warning -gt $nr_warning ]; then
- tst_resm TFAIL "kernel WARNING was detected!"
+ tst_res TFAIL "kernel WARNING was detected!"
fi
if [ $new_null -gt $nr_null ]; then
- tst_resm "kernel NULL pointer dereference!"
+ tst_res TWARN "kernel NULL pointer dereference!"
fi
if [ $new_lockdep -gt $nr_lockdep ]; then
- tst_resm "kernel lockdep warning was detected!"
+ tst_res TWARN "kernel lockdep warning was detected!"
fi
nr_bug=$new_bug
@@ -89,10 +55,49 @@ check_kernel_bug()
echo "check_kernel_bug found something!"
dmesg
- failed=1
return 0
}
+setup()
+{
+ if tst_kvcmp -lt "2.6.30"; then
+ tst_brk TBROK "Test should be run with kernel 2.6.30 or newer"
+ fi
+
+ cgroup_require "memory"
+ cgroup_version=$(cgroup_get_version "memory")
+ mount_point=$(cgroup_get_mountpoint "memory")
+ test_dir=$(cgroup_get_test_path "memory")
+ task_list=$(cgroup_get_task_list "memory")
+ if [ "$cgroup_version" = "2" ]; then
+ memory_limit="memory.max"
+ else
+ memory_limit="memory.limit_in_bytes"
+ fi
+
+ [ "$cgroup_version" = "2" ] && ROD echo "+memory" \> "$test_dir/cgroup.subtree_control"
+
+ tst_res TINFO "test starts with cgroup version $cgroup_version"
+}
+
+cleanup()
+{
+ cleanup_testpath "$test_dir/0"
+ cgroup_cleanup
+}
+
+create_testpath()
+{
+ local path="$1"
+ [ ! -e "$path" ] && ROD mkdir "$path"
+}
+
+cleanup_testpath()
+{
+ local path="$1"
+ [ -e "$path" ] && ROD rmdir "$path"
+}
+
#---------------------------------------------------------------------------
# Bug: The bug was, while forking mass processes, trigger memcgroup OOM,
# then NULL pointer dereference may be hit.
@@ -102,16 +107,19 @@ check_kernel_bug()
#---------------------------------------------------------------------------
test_1()
{
- mkdir memcg/0/
- echo 0 > memcg/0/memory.limit_in_bytes
+ local test_path
+ test_path="$test_dir/0"
- ./memcg_test_1
+ create_testpath "$test_path"
+ ROD echo 0 > "$test_path/$memory_limit"
- rmdir memcg/0/
+ ./memcg_test_1 "$test_path/$task_list"
+
+ cleanup_testpath "$test_path"
check_kernel_bug
if [ $? -eq 1 ]; then
- tst_resm TPASS "no kernel bug was found"
+ tst_res TPASS "no kernel bug was found"
fi
}
@@ -124,19 +132,31 @@ test_1()
#---------------------------------------------------------------------------
test_2()
{
+ local test_path
+
+ # for cgroup2 writing to memory.max first checks the new limit against the
+ # current usage and will start killing processes if oom, therefore we do not
+ # expect EBUSY to be returned by the shrink operation.
+ if [ "$cgroup_version" = "2" ]; then
+ tst_res TCONF "Cgroup v2 found, skipping test"
+ return
+ fi
+
+ test_path="$test_dir/0"
+
./memcg_test_2 &
pid1=$!
sleep 1
- mkdir memcg/0
- echo $pid1 > memcg/0/tasks
+ create_testpath "$test_path"
+ ROD echo $pid1 > "$test_path"/tasks
# let pid1 'test_2' allocate memory
/bin/kill -SIGUSR1 $pid1
sleep 1
# shrink memory
- echo 1 > memcg/0/memory.limit_in_bytes 2>&1 &
+ echo 1 > "$test_path"/memory.limit_in_bytes 2>&1 &
pid2=$!
# check if 'echo' will exit and exit with failure
@@ -146,26 +166,25 @@ test_2()
if [ $? -ne 0 ]; then
wait $pid2
if [ $? -eq 0 ]; then
- tst_resm TFAIL "echo should return failure"
- failed=1
+ tst_res TFAIL "echo should return failure"
kill -9 $pid1 $pid2 > /dev/null 2>&1
wait $pid1 $pid2
- rmdir memcg/0
+ cleanup_testpath "$test_path"
+ return
fi
break
fi
done
if [ $tmp -eq 5 ]; then
- tst_resm TFAIL "'echo' doesn't exit!"
- failed=1
+ tst_res TFAIL "'echo' doesn't exit!"
else
- tst_resm TPASS "EBUSY was returned as expected"
+ tst_res TPASS "EBUSY was returned as expected"
fi
kill -9 $pid1 $pid2 > /dev/null 2>&1
wait $pid1 $pid2 > /dev/null 2>&1
- rmdir memcg/0
+ cleanup_testpath "$test_path"
}
#---------------------------------------------------------------------------
@@ -176,19 +195,22 @@ test_2()
#---------------------------------------------------------------------------
test_3()
{
- mkdir memcg/0
- for pid in `cat memcg/tasks`; do
- echo $pid > memcg/0/tasks 2> /dev/null
+ local test_path
+ test_path="$test_dir/0"
+ create_testpath "$test_path"
+
+ for pid in $(cat "$mount_point/$task_list"); do
+ echo $pid > "$test_path/$task_list" 2> /dev/null
done
- for pid in `cat memcg/0/tasks`; do
- echo $pid > memcg/tasks 2> /dev/null
+ for pid in $(cat "$test_path/$task_list"); do
+ echo $pid > "$mount_point/$task_list" 2> /dev/null
done
- rmdir memcg/0
+ cleanup_testpath "$test_path"
check_kernel_bug
if [ $? -eq 1 ]; then
- tst_resm TPASS "no kernel bug was found"
+ tst_res TPASS "no kernel bug was found"
fi
}
@@ -200,11 +222,15 @@ test_3()
#---------------------------------------------------------------------------
test_4()
{
- ./memcg_test_4.sh
+ local test_path
+ test_path="$test_dir/0"
+ create_testpath "$test_path"
+
+ ./memcg_test_4.sh "$cgroup_version" "$mount_point" "$test_path"
check_kernel_bug
if [ $? -eq 1 ]; then
- tst_resm TPASS "no kernel bug was found"
+ tst_res TPASS "no kernel bug was found"
fi
# test_4.sh might be killed by oom, so do clean up here
@@ -212,31 +238,10 @@ test_4()
killall -9 memcg_test_4.sh 2> /dev/null
# if test_4.sh gets killed, it won't clean cgroup it created
- rmdir memcg/0 2> /dev/null
+ cleanup_testpath "$test_path"
swapon -a
}
-# main
-failed=0
-mkdir memcg/
-
-for cur in $(seq 1 $TST_TOTAL); do
- export TST_COUNT=$cur
-
- mount -t cgroup -o memory xxx memcg/
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "failed to mount memory subsystem"
- failed=1
- continue
- fi
-
- test_$cur
-
- umount memcg/
-done
-
-rmdir memcg/
-
-exit $failed
-
+. cgroup_lib.sh
+tst_run
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_test_1.c b/testcases/kernel/controllers/memcg/regression/memcg_test_1.c
index c7fb948fe..95f1aabb3 100644
--- a/testcases/kernel/controllers/memcg/regression/memcg_test_1.c
+++ b/testcases/kernel/controllers/memcg/regression/memcg_test_1.c
@@ -1,24 +1,6 @@
-/******************************************************************************/
-/* */
-/* Copyright (c) 2009 FUJITSU LIMITED */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation; either version 2 of the License, or */
-/* (at your option) any later version. */
-/* */
-/* This program is distributed in the hope that it will be useful, */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
-/* the GNU General Public License for more details. */
-/* */
-/* You should have received a copy of the GNU General Public License */
-/* along with this program; if not, write to the Free Software */
-/* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
-/* */
-/* Author: Li Zefan <lizf@cn.fujitsu.com> */
-/* */
-/******************************************************************************/
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2009 FUJITSU LIMITED
+// Author: Li Zefan <lizf@cn.fujitsu.com>
#include <stdio.h>
#include <stdlib.h>
@@ -33,17 +15,25 @@
#define FORKED_PROC_COUNT 10
-int main(void)
+int main(int argc, char *argv[])
{
char buf[10];
int i;
int loop;
int pid;
+ int fd;
int size = getpagesize();
- int fd = open("memcg/0/tasks", O_WRONLY);
- if (fd < 0)
- return 1;
+ if (argc != 2) {
+ perror("Invalid num of args");
+ exit(1);
+ }
+
+ fd = open(argv[1], O_WRONLY);
+ if (fd < 0) {
+ perror("Could not open tasklist");
+ exit(1);
+ }
for (loop = 0; loop < LOOP; loop++) {
for (i = 0; i < FORKED_PROC_COUNT; i++) {
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_test_2.c b/testcases/kernel/controllers/memcg/regression/memcg_test_2.c
index 843b07816..c118d4559 100644
--- a/testcases/kernel/controllers/memcg/regression/memcg_test_2.c
+++ b/testcases/kernel/controllers/memcg/regression/memcg_test_2.c
@@ -1,24 +1,6 @@
-/******************************************************************************/
-/* */
-/* Copyright (c) 2009 FUJITSU LIMITED */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation; either version 2 of the License, or */
-/* (at your option) any later version. */
-/* */
-/* This program is distributed in the hope that it will be useful, */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
-/* the GNU General Public License for more details. */
-/* */
-/* You should have received a copy of the GNU General Public License */
-/* along with this program; if not, write to the Free Software */
-/* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
-/* */
-/* Author: Li Zefan <lizf@cn.fujitsu.com> */
-/* */
-/******************************************************************************/
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2009 FUJITSU LIMITED
+// Author: Li Zefan <lizf@cn.fujitsu.com>
#include <sys/mman.h>
#include <signal.h>
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_test_3.c b/testcases/kernel/controllers/memcg/regression/memcg_test_3.c
index 75a6e1545..4bf4270bb 100644
--- a/testcases/kernel/controllers/memcg/regression/memcg_test_3.c
+++ b/testcases/kernel/controllers/memcg/regression/memcg_test_3.c
@@ -17,12 +17,10 @@
#include <sys/types.h>
#include <sys/mount.h>
#include "tst_test.h"
+#include "tst_cgroup.h"
-#define MNTPOINT "memcg"
-#define SUBDIR "memcg/testdir"
-
-static int mount_flag;
static volatile int sigcounter;
+static struct tst_cg_group *test_cg;
static void sighandler(int sig LTP_ATTRIBUTE_UNUSED)
{
@@ -48,9 +46,10 @@ static void do_test(void)
do_child();
while (sigcounter < 50000) {
- if (access(SUBDIR, F_OK))
- SAFE_MKDIR(SUBDIR, 0644);
- rmdir(SUBDIR);
+ test_cg = tst_cg_group_mk(tst_cg, "test");
+
+ if (test_cg)
+ test_cg = tst_cg_group_rm(test_cg);
}
SAFE_KILL(cpid, SIGKILL);
@@ -61,32 +60,26 @@ static void do_test(void)
static void setup(void)
{
- int ret;
+ struct tst_cg_opts opts;
- SAFE_MKDIR(MNTPOINT, 0644);
+ memset(&opts, 0, sizeof(opts));
- ret = mount("memcg", MNTPOINT, "cgroup", 0, "memory");
- if (ret) {
- if (errno == ENOENT)
- tst_brk(TCONF | TERRNO, "memcg not supported");
-
- tst_brk(TCONF | TERRNO, "mounting memcg failed");
- }
- mount_flag = 1;
+ tst_cg_require("memory", &opts);
+ tst_cg_init();
+ if (TST_CG_VER(tst_cg, "memory") != TST_CG_V1)
+ SAFE_CG_PRINT(tst_cg, "cgroup.subtree_control", "+memory");
}
static void cleanup(void)
{
- if (!access(SUBDIR, F_OK))
- SAFE_RMDIR(SUBDIR);
+ if (test_cg)
+ test_cg = tst_cg_group_rm(test_cg);
- if (mount_flag)
- tst_umount(MNTPOINT);
+ tst_cg_cleanup();
}
static struct tst_test test = {
.needs_root = 1,
- .needs_tmpdir = 1,
.forks_child = 1,
.min_kver = "2.6.24",
.setup = setup,
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_test_4.c b/testcases/kernel/controllers/memcg/regression/memcg_test_4.c
index d714561ed..743c84108 100644
--- a/testcases/kernel/controllers/memcg/regression/memcg_test_4.c
+++ b/testcases/kernel/controllers/memcg/regression/memcg_test_4.c
@@ -1,24 +1,6 @@
-/******************************************************************************/
-/* */
-/* Copyright (c) 2009 FUJITSU LIMITED */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation; either version 2 of the License, or */
-/* (at your option) any later version. */
-/* */
-/* This program is distributed in the hope that it will be useful, */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
-/* the GNU General Public License for more details. */
-/* */
-/* You should have received a copy of the GNU General Public License */
-/* along with this program; if not, write to the Free Software */
-/* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
-/* */
-/* Author: Li Zefan <lizf@cn.fujitsu.com> */
-/* */
-/******************************************************************************/
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2009 FUJITSU LIMITED
+// Author: Li Zefan <lizf@cn.fujitsu.com>
#include <sys/mman.h>
#include <err.h>
diff --git a/testcases/kernel/controllers/memcg/regression/memcg_test_4.sh b/testcases/kernel/controllers/memcg/regression/memcg_test_4.sh
index 620031366..8723abb2f 100755
--- a/testcases/kernel/controllers/memcg/regression/memcg_test_4.sh
+++ b/testcases/kernel/controllers/memcg/regression/memcg_test_4.sh
@@ -1,30 +1,21 @@
#! /bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2009 FUJITSU LIMITED
+# Author: Li Zefan <lizf@cn.fujitsu.com>
-################################################################################
-## ##
-## Copyright (c) 2009 FUJITSU LIMITED ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## Author: Li Zefan <lizf@cn.fujitsu.com> ##
-## ##
-################################################################################
-
-# attach current task to memcg/0/
-mkdir memcg/0
-echo $$ > memcg/0/tasks
+cgroup_version="$1"
+mount_point="$2"
+test_path="$3"
+
+if [ "$cgroup_version" = "2" ]; then
+ task_list="cgroup.procs"
+ memory_limit="memory.max"
+else
+ task_list="tasks"
+ memory_limit="memory.limit_in_bytes"
+fi
+
+echo $$ > "$test_path/$task_list"
./memcg_test_4 &
pid=$!
@@ -35,14 +26,13 @@ sleep 1
sleep 1
# shrink memory, and then 80M will be swapped
-echo 40M > memcg/0/memory.limit_in_bytes
+echo 40M > "$test_path/$memory_limit"
# turn off swap, and swapoff will be killed
swapoff -a
sleep 1
-echo $pid > memcg/tasks 2> /dev/null
-echo $$ > memcg/tasks 2> /dev/null
+echo $pid > "$mount_point/$task_list" 2> /dev/null
+echo $$ > "$mount_point/$task_list" 2> /dev/null
# now remove the cgroup
-rmdir memcg/0
-
+rmdir "$test_path"
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 06/10] controllers: Update memcg_stress_test to use newer cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (4 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 05/10] controllers: Update memcg/regression/* to new test " Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 07/10] controllers: update memcg/functional " Luke Nowakowski-Krijger
` (4 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update the test to use the newer cgroup lib which enables the testing of
both v1 and v2 memory controllers and makes the setup and cleanup much
simpler.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v2->v6: None
.../memcg/stress/memcg_stress_test.sh | 32 +++++++------------
1 file changed, 12 insertions(+), 20 deletions(-)
diff --git a/testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh b/testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
index fa0df3196..d38c650ea 100755
--- a/testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
+++ b/testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
@@ -21,10 +21,16 @@ TST_TIMEOUT=2100
setup()
{
- if ! is_cgroup_subsystem_available_and_enabled "memory"; then
- tst_brk TCONF "Either kernel does not support Memory Resource Controller or feature not enabled"
+ cgroup_require "memory"
+ cgroup_version=$(cgroup_get_version "memory")
+ test_path=$(cgroup_get_test_path "memory")
+ task_list=$(cgroup_get_task_list "memory")
+ if [ "$cgroup_version" = "2" ]; then
+ ROD echo "+memory" > "$test_path/cgroup.subtree_control"
fi
+ tst_res TINFO "test starts with cgroup version $cgroup_version"
+
echo 3 > /proc/sys/vm/drop_caches
sleep 2
local mem_free=`cat /proc/meminfo | grep MemFree | awk '{ print $2 }'`
@@ -41,18 +47,7 @@ setup()
cleanup()
{
- if [ -e /dev/memcg ]; then
- EXPECT_PASS umount /dev/memcg
- EXPECT_PASS rmdir /dev/memcg
- fi
-}
-
-do_mount()
-{
- cleanup
-
- EXPECT_PASS mkdir /dev/memcg
- EXPECT_PASS mount -t cgroup -omemory memcg /dev/memcg
+ cgroup_cleanup
}
# $1 Number of cgroups
@@ -69,13 +64,11 @@ run_stress()
tst_res TINFO "Testing $cgroups cgroups, using $mem_size MB, interval $interval"
- do_mount
-
tst_res TINFO "Starting cgroups"
for i in $(seq 0 $(($cgroups-1))); do
- mkdir /dev/memcg/$i 2> /dev/null
+ ROD mkdir "$test_path/$i"
memcg_process_stress $mem_size $interval &
- echo $! > /dev/memcg/$i/tasks
+ ROD echo $! > "$test_path/$i/$task_list"
pids="$pids $!"
done
@@ -91,12 +84,11 @@ run_stress()
for pid in $pids; do
kill -KILL $pid 2> /dev/null
wait $pid 2> /dev/null
- rmdir /dev/memcg/$i 2> /dev/null
+ ROD rmdir "$test_path/$i"
i=$((i+1))
done
tst_res TPASS "Test passed"
- cleanup
}
test1()
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 07/10] controllers: update memcg/functional to use newer cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (5 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 06/10] controllers: Update memcg_stress_test to use newer " Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 08/10] controllers: Update pids.sh " Luke Nowakowski-Krijger
` (3 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update memcg_lib.sh to uses the newer cgroup lib to cleanup the mounting
and checking of the memory controller.
There are still some tests that make sense for v2 and should be modified
in a future patch, but since most of the tests are testing specific v1
memory controller features lets just skip it for now if v2 is mounted.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v2->v6: Fixed spelling mistakes reported by checkpatch
.../memcg/functional/memcg_force_empty.sh | 2 +-
.../controllers/memcg/functional/memcg_lib.sh | 54 ++++++++++---------
2 files changed, 30 insertions(+), 26 deletions(-)
diff --git a/testcases/kernel/controllers/memcg/functional/memcg_force_empty.sh b/testcases/kernel/controllers/memcg/functional/memcg_force_empty.sh
index 23a4bd04d..580468784 100755
--- a/testcases/kernel/controllers/memcg/functional/memcg_force_empty.sh
+++ b/testcases/kernel/controllers/memcg/functional/memcg_force_empty.sh
@@ -50,7 +50,7 @@ test6()
{
# writing to non-empty top mem cgroup's force_empty
# should return failure
- EXPECT_FAIL echo 1 \> /dev/memcg/memory.force_empty
+ EXPECT_FAIL echo 1 \> "$mount_point/memory.force_empty"
}
. memcg_lib.sh
diff --git a/testcases/kernel/controllers/memcg/functional/memcg_lib.sh b/testcases/kernel/controllers/memcg/functional/memcg_lib.sh
index 96d26ef2d..a89e24485 100755
--- a/testcases/kernel/controllers/memcg/functional/memcg_lib.sh
+++ b/testcases/kernel/controllers/memcg/functional/memcg_lib.sh
@@ -16,20 +16,20 @@ TST_TESTFUNC=memcg_testfunc
memcg_require_memsw()
{
- if ! [ -e /dev/memcg/memory.limit_in_bytes ]; then
- tst_brk TBROK "/dev/memcg must be mounted before calling memcg_require_memsw"
+ if ! [ -e "$mount_point/memory.limit_in_bytes" ]; then
+ tst_brk TBROK "$mount_point must be mounted before calling memcg_require_memsw"
fi
- if ! [ -e /dev/memcg/memory.memsw.limit_in_bytes ]; then
+ if ! [ -e "$mount_point/memory.memsw.limit_in_bytes" ]; then
tst_brk TCONF "mem+swap is not enabled"
fi
}
memcg_require_hierarchy_disabled()
{
- if [ ! -e "/dev/memcg/memory.use_hierarchy" ]; then
- tst_brk TBROK "/dev/memcg must be mounted before calling memcg_require_hierarchy_disabled"
+ if [ ! -e "$mount_point/memory.use_hierarchy" ]; then
+ tst_brk TBROK "$mount_point must be mounted before calling memcg_require_hierarchy_disabled"
fi
- if [ $(cat /dev/memcg/memory.use_hierarchy) -eq 1 ]; then
+ if [ "$(cat "$mount_point/memory.use_hierarchy")" -eq 1 ]; then
tst_brk TCONF "Test requires root cgroup memory.use_hierarchy=0"
fi
}
@@ -71,12 +71,19 @@ memcg_adjust_limit_for_kmem()
memcg_setup()
{
- if ! is_cgroup_subsystem_available_and_enabled "memory"; then
- tst_brk TCONF "Either kernel does not support Memory Resource Controller or feature not enabled"
+ cgroup_require "memory"
+ cgroup_version=$(cgroup_get_version "memory")
+
+ # Most of the tests here are testing specific parts of the cgroup v1 memory interface that is
+ # not present for cgroup2, so if it is already mounted on a cgroup v2 hierarchy we should skip
+ # the test.
+ # Some tests still make sense in v2 and should be modified in a future patch
+ if [ "$cgroup_version" = "2" ]; then
+ tst_brk TCONF "memory controller mounted on cgroup v2 hierarchy, skipping test."
fi
- ROD mkdir /dev/memcg
- ROD mount -t cgroup -omemory memcg /dev/memcg
+ mount_point=$(cgroup_get_mountpoint "memory")
+ test_dir=$(cgroup_get_test_path "memory")
# For kernels older than v5.11 the default value for
# memory.use_hierarchy is 0 and some of tests (memcg_stat_test.sh and
@@ -89,15 +96,15 @@ memcg_setup()
# Starting with kernel v5.11, the non-hierarchical mode is not
# available. See Linux kernel commit bef8620cd8e0 ("mm: memcg:
# deprecate the non-hierarchical mode").
- orig_memory_use_hierarchy=$(cat /dev/memcg/memory.use_hierarchy)
+ orig_memory_use_hierarchy=$(cat "$mount_point/memory.use_hierarchy")
if [ -z "$orig_memory_use_hierarchy" ];then
- tst_res TINFO "cat /dev/memcg/ failed"
+ tst_res TINFO "cat $mount_point failed"
elif [ "$orig_memory_use_hierarchy" = "0" ];then
orig_memory_use_hierarchy=""
else
- echo 0 > /dev/memcg/memory.use_hierarchy 2>/dev/null
+ echo 0 > "$mount_point/memory.use_hierarchy" 2>/dev/null
if [ $? -ne 0 ];then
- tst_res TINFO "set /dev/memcg/memory.use_hierarchy to 0 failed"
+ tst_res TINFO "set $mount_point/memory.use_hierarchy to 0 failed"
fi
fi
@@ -110,22 +117,19 @@ memcg_cleanup()
cd $TST_TMPDIR
# In order to remove all subgroups, we have to remove them recursively
- if [ -e /dev/memcg/ltp_$$ ]; then
- ROD find /dev/memcg/ltp_$$ -depth -type d -delete
+ if [ -e $test_dir ]; then
+ ROD find $test_dir -depth -type d -delete
fi
if [ -n "$orig_memory_use_hierarchy" ];then
- echo $orig_memory_use_hierarchy > /dev/memcg/memory.use_hierarchy
+ echo $orig_memory_use_hierarchy > $mount_point/memory.use_hierarchy
if [ $? -ne 0 ];then
- tst_res TINFO "restore /dev/memcg/memory.use_hierarchy failed"
+ tst_res TINFO "restore $mount_point/memory.use_hierarchy failed"
fi
orig_memory_use_hierarchy=""
fi
- if [ -e "/dev/memcg" ]; then
- umount /dev/memcg
- rmdir /dev/memcg
- fi
+ cgroup_cleanup
[ "$MEMCG_SHMMAX" = "1" ] && shmmax_cleanup
}
@@ -369,8 +373,8 @@ test_limit_in_bytes()
memcg_testfunc()
{
- ROD mkdir /dev/memcg/ltp_$$
- cd /dev/memcg/ltp_$$
+ ROD mkdir $test_dir/ltp_$$
+ cd $test_dir/ltp_$$
if type ${MEMCG_TESTFUNC}1 > /dev/null 2>&1; then
${MEMCG_TESTFUNC}$1 $1 "$2"
@@ -379,7 +383,7 @@ memcg_testfunc()
fi
cd $TST_TMPDIR
- ROD rmdir /dev/memcg/ltp_$$
+ ROD rmdir $test_dir/ltp_$$
}
memcg_no_testfunc()
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 08/10] controllers: Update pids.sh to use newer cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (6 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 07/10] controllers: update memcg/functional " Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 09/10] controllers: update cpuset_regression_test.sh " Luke Nowakowski-Krijger
` (2 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Updated to use the newer cgroup_lib to make mounting and cleanup
nicer.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: None
testcases/kernel/controllers/pids/pids.sh | 67 +++--------------------
1 file changed, 9 insertions(+), 58 deletions(-)
diff --git a/testcases/kernel/controllers/pids/pids.sh b/testcases/kernel/controllers/pids/pids.sh
index e8bafc739..26a0c6a22 100755
--- a/testcases/kernel/controllers/pids/pids.sh
+++ b/testcases/kernel/controllers/pids/pids.sh
@@ -36,66 +36,17 @@ cleanup()
{
killall -9 pids_task2 >/dev/null 2>&1
- tst_res TINFO "removing created directories"
- rmdir $testpath
- if [ "$mounted" -ne "1" ]; then
- tst_res TINFO "Umounting pids"
- umount $mount_point
- rmdir $mount_point
- fi
-}
-
-setup_cgroupv2()
-{
- mount_point=$(grep -w cgroup2 /proc/mounts | cut -f 2 | cut -d " " -f2)
- if ! grep -q pids "$mount_point"/cgroup.controllers; then
- tst_res TINFO "pids not supported on cgroup v2."
- return
- fi
-
- testpath="$mount_point/ltp_pids_$caseno"
- ROD mkdir -p "$testpath"
- task_list="cgroup.procs"
- cgroup_v="v2"
-}
-
-setup_cgroupv1()
-{
- exist=`grep -w pids /proc/cgroups | cut -f1`;
- if [ "$exist" = "" ]; then
- tst_brk TCONF NULL "pids not supported"
- fi
-
- mount_point=`grep -w pids /proc/mounts | cut -f 2 | cut -d " " -f2`
-
- if [ "$mount_point" = "" ]; then
- mounted=0
- mount_point=/dev/cgroup
- fi
-
- testpath=$mount_point/ltp_pids_$caseno
-
- if [ "$mounted" -eq "0" ]; then
- ROD mkdir -p $mount_point
- ROD mount -t cgroup -o pids none $mount_point
- fi
- ROD mkdir -p $testpath
- task_list="tasks"
- cgroup_v="v1"
+ cgroup_cleanup
}
setup()
{
- # If cgroup2 is mounted already, then let's
- # try to start with cgroup v2.
- if grep -q cgroup2 /proc/mounts; then
- setup_cgroupv2
- fi
- if [ -z "$cgroup_v" ]; then
- setup_cgroupv1
- fi
+ cgroup_require "pids"
+ cgroup_version=$(cgroup_get_version "pids")
+ testpath=$(cgroup_get_test_path "pids")
+ task_list=$(cgroup_get_task_list "pids")
- tst_res TINFO "test starts with cgroup $cgroup_v"
+ tst_res TINFO "test starts with cgroup version $cgroup_version"
}
start_pids_tasks2()
@@ -296,7 +247,7 @@ case8()
{
tst_res TINFO "set child cgroup limit smaller than its parent limit"
ROD echo $max \> $testpath/pids.max
- if [ "$cgroup_v" = "v2" ]; then
+ if [ "$cgroup_version" = "2" ]; then
ROD echo +pids \> "$testpath"/cgroup.subtree_control
fi
mkdir $testpath/child
@@ -326,7 +277,7 @@ case9()
tst_res TINFO "migrate cgroup"
lim=$((max - 1))
- if [ "$cgroup_v" = "v2" ]; then
+ if [ "$cgroup_version" = "2" ]; then
ROD echo +pids \> "$testpath"/cgroup.subtree_control
fi
for i in 1 2; do
@@ -391,5 +342,5 @@ do_test()
case$caseno
}
-. tst_test.sh
+. cgroup_lib.sh
tst_run
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 09/10] controllers: update cpuset_regression_test.sh to use newer cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (7 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 08/10] controllers: Update pids.sh " Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 10/10] controllers: update cgroup_regression_test " Luke Nowakowski-Krijger
2022-07-27 6:34 ` [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Li Wang
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
Update the test to use the newer cgroup lib which handles mounting for
v1 and v2 controllers enabling them both to be tested and cleaning up
the mounting and cleanup process.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: None
.../cpuset/cpuset_regression_test.sh | 26 +++++--------------
1 file changed, 7 insertions(+), 19 deletions(-)
diff --git a/testcases/kernel/controllers/cpuset/cpuset_regression_test.sh b/testcases/kernel/controllers/cpuset/cpuset_regression_test.sh
index 68fcf2eec..8e87d20e4 100755
--- a/testcases/kernel/controllers/cpuset/cpuset_regression_test.sh
+++ b/testcases/kernel/controllers/cpuset/cpuset_regression_test.sh
@@ -122,18 +122,13 @@ cpuset_restore()
setup()
{
- if ! is_cgroup_subsystem_available_and_enabled "cpuset"; then
- tst_brk TCONF "Either kernel does not support cpuset controller or feature not enabled"
- fi
-
- # We need to mount cpuset if it is not found.
- root_cpuset_dir=$(get_cgroup_mountpoint cpuset)
- if [ -z "$root_cpuset_dir" ]; then
- root_cpuset_dir="$LOCAL_MOUNTPOINT"
+ cgroup_require "cpuset"
+ cgroup_version=$(cgroup_get_version "cpuset")
+ root_cpuset_dir=$(cgroup_get_mountpoint "cpuset")
+ testpath=$(cgroup_get_test_path "cpuset")
+ task_list=$(cgroup_get_task_list "cpuset")
- ROD_SILENT mkdir -p ${root_cpuset_dir}
- ROD_SILENT mount -t cpuset cpuset ${root_cpuset_dir}
- fi
+ tst_res TINFO "test starts with cgroup version $cgroup_version"
if ! [ -f ${root_cpuset_dir}/${cpu_exclusive} ]; then
cpu_exclusive=cpu_exclusive
@@ -180,14 +175,7 @@ cleanup()
echo ${old_cpu_exclusive_value} > ${root_cpuset_dir}/${cpu_exclusive}
fi
- if [ -d "$LOCAL_MOUNTPOINT" ]; then
- umount ${LOCAL_MOUNTPOINT}
- if [ $? -ne 0 ]; then
- tst_res TWARN "'umount ${LOCAL_MOUNTPOINT}' failed"
- fi
-
- rmdir ${LOCAL_MOUNTPOINT}
- fi
+ cgroup_cleanup
}
test()
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [LTP] [PATCH v6 10/10] controllers: update cgroup_regression_test to use newer cgroup lib
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (8 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 09/10] controllers: update cpuset_regression_test.sh " Luke Nowakowski-Krijger
@ 2022-07-26 22:13 ` Luke Nowakowski-Krijger
2022-07-27 6:34 ` [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Li Wang
10 siblings, 0 replies; 15+ messages in thread
From: Luke Nowakowski-Krijger @ 2022-07-26 22:13 UTC (permalink / raw)
To: ltp, rpalethorpe, liwang, pvorel, chrubis
The older function in the cgroup lib 'get_cgroup_mountpoint' has been
removed, so instead replace it with its old functionaility to get
mountpoint.
Also use the newer cgroup lib require operation to mount and cleanup a
cpu controller.
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
---
v3->v6: None
.../cgroup/cgroup_regression_test.sh | 31 ++++++-------------
1 file changed, 9 insertions(+), 22 deletions(-)
diff --git a/testcases/kernel/controllers/cgroup/cgroup_regression_test.sh b/testcases/kernel/controllers/cgroup/cgroup_regression_test.sh
index 69b51773c..bfa9097ec 100755
--- a/testcases/kernel/controllers/cgroup/cgroup_regression_test.sh
+++ b/testcases/kernel/controllers/cgroup/cgroup_regression_test.sh
@@ -168,17 +168,8 @@ test3()
return
fi
- cpu_subsys_path=$(get_cgroup_mountpoint "cpu")
-
- # Run the test for 30 secs
- if [ -z "$cpu_subsys_path" ]; then
- mount -t cgroup -o cpu xxx cgroup/
- if [ $? -ne 0 ]; then
- tst_res TFAIL "Failed to mount cpu subsys"
- return
- fi
- cpu_subsys_path=cgroup
- fi
+ cgroup_require "cpu"
+ cpu_subsys_path=$(cgroup_get_mountpoint "cpu")
cgroup_regression_3_1.sh $cpu_subsys_path &
pid1=$!
@@ -191,7 +182,7 @@ test3()
wait $pid2 2>/dev/null
rmdir $cpu_subsys_path/0 2> /dev/null
- tst_umount $PWD/cgroup
+ cgroup_cleanup
check_kernel_bug
}
@@ -303,21 +294,15 @@ test6()
test_7_1()
{
local subsys=$1
+ local subsys_path
# we should be careful to select a $subsys_path which is related to
# cgroup only: if cgroup debugging is enabled a 'debug' $subsys
# could be passed here as params and this will lead to ambiguity and
# errors when grepping simply for 'debug' in /proc/mounts since we'll
# find also /sys/kernel/debug. Helper takes care of this.
- local subsys_path=$(get_cgroup_mountpoint $subsys)
-
- if [ -z "$subsys_path" ]; then
- mount -t cgroup -o $subsys xxx cgroup/
- if [ $? -ne 0 ]; then
- tst_res TFAIL "failed to mount $subsys"
- return
- fi
- subsys_path=cgroup
- fi
+
+ cgroup_require "$subsys"
+ subsys_path=$(cgroup_get_mountpoint "$subsys")
mkdir $subsys_path/0
sleep 100 < $subsys_path/0 & # add refcnt to this dir
@@ -332,6 +317,8 @@ test_7_1()
wait $! 2>/dev/null
umount cgroup/
fi
+
+ cgroup_cleanup
}
test_7_2()
--
2.34.1
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
` (9 preceding siblings ...)
2022-07-26 22:13 ` [LTP] [PATCH v6 10/10] controllers: update cgroup_regression_test " Luke Nowakowski-Krijger
@ 2022-07-27 6:34 ` Li Wang
2022-07-27 10:14 ` Petr Vorel
10 siblings, 1 reply; 15+ messages in thread
From: Li Wang @ 2022-07-27 6:34 UTC (permalink / raw)
To: Luke Nowakowski-Krijger; +Cc: LTP List
[-- Attachment #1.1: Type: text/plain, Size: 140 bytes --]
Hi Petr and all,
I agree with all the changes in V6, pretty good.
Feel free to add my Reviewed-by when you do merge.
--
Regards,
Li Wang
[-- Attachment #1.2: Type: text/html, Size: 499 bytes --]
[-- Attachment #2: Type: text/plain, Size: 60 bytes --]
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library
2022-07-27 6:34 ` [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Li Wang
@ 2022-07-27 10:14 ` Petr Vorel
2022-07-27 12:13 ` Petr Vorel
0 siblings, 1 reply; 15+ messages in thread
From: Petr Vorel @ 2022-07-27 10:14 UTC (permalink / raw)
To: Li Wang; +Cc: LTP List, Luke Nowakowski-Krijger
Hi all,
> Hi Petr and all,
> I agree with all the changes in V6, pretty good.
> Feel free to add my Reviewed-by when you do merge.
FYI I'm going to merge whole patchset after tests finish to run, with the following
diff below and Li's and Richie's RBT.
* escape > in rod (ROD ... \>)
- ROD echo $! > "$test_dir/$task_list"
+ ROD echo $! \> "$test_dir/$task_list"
@Luke: it would not work without it.
https://github.com/linux-test-project/ltp/wiki/Shell-Test-API#rod-and-rod_silent
NOTE: I plan to add a shell check for it to SHELL_CHECK (i.e. grep -E 'ROD[^\>]+>').
* fix "$ctrl" detection
@Luke: [ $# -eq 0 ] was not optimal, but it worked, because the original autor
Cristian Marussi who added first checks during rewrite called
cgroup_get_test_path() without quotes when passed variables. You started to
quote them, which broke this check because passing "" means $# = 1. But simply
testing whether variable contains anything is better:
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_test_path: controller not defined"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_get_test_path: controller not defined"
* optimize testing:
- [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_test_path: No previous state found. Forgot to call cgroup_require?"
+ [ "$_cgroup_state" ] || tst_brk TBROK "cgroup_get_test_path: No previous state found. Forgot to call cgroup_require?"
* fix extra space at help in testcases/lib/tst_cgctl.c
- fprintf(stderr, "Usage: tst_cgctl require [controller] [test_pid]\n\tcleanup [config (output of tst_cg_print_config)]\n\tprint\n\t help\n");
+ fprintf(stderr, "Usage: tst_cgctl require [controller] [test_pid]\n\tcleanup [config (output of tst_cg_print_config)]\n\tprint\n\thelp\n");
Kind regards,
Petr
diff --git testcases/kernel/controllers/cgroup_lib.sh testcases/kernel/controllers/cgroup_lib.sh
index 5fe2252be..9e59221ab 100644
--- testcases/kernel/controllers/cgroup_lib.sh
+++ testcases/kernel/controllers/cgroup_lib.sh
@@ -15,8 +15,8 @@ cgroup_get_mountpoint()
local ctrl="$1"
local mountpoint
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_mountpoint: controller not defined"
- [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_mountpoint: No previous state found. Forgot to call cgroup_require?"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_get_mountpoint: controller not defined"
+ [ "$_cgroup_state" ] || tst_brk TBROK "cgroup_get_mountpoint: No previous state found. Forgot to call cgroup_require?"
mountpoint=$(echo "$_cgroup_state" | grep -w "^$ctrl" | awk '{ print $4 }')
echo "$mountpoint"
@@ -34,8 +34,8 @@ cgroup_get_test_path()
local mountpoint
local test_path
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_test_path: controller not defined"
- [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_test_path: No previous state found. Forgot to call cgroup_require?"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_get_test_path: controller not defined"
+ [ "$_cgroup_state" ] || tst_brk TBROK "cgroup_get_test_path: No previous state found. Forgot to call cgroup_require?"
mountpoint=$(cgroup_get_mountpoint "$ctrl")
@@ -57,11 +57,11 @@ cgroup_get_version()
local ctrl="$1"
local version
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_version: controller not defined"
- [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_get_version: No previous state found. Forgot to call cgroup_require?"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_get_version: controller not defined"
+ [ "$_cgroup_state" ] || tst_brk TBROK "cgroup_get_version: No previous state found. Forgot to call cgroup_require?"
version=$(echo "$_cgroup_state" | grep -w "^$ctrl" | awk '{ print $2 }')
- [ "$version" = "" ] && tst_brk TBROK "cgroup_get_version: Could not find controller $ctrl"
+ [ "$version" ] || tst_brk TBROK "cgroup_get_version: Could not find controller $ctrl"
echo "$version"
@@ -73,7 +73,7 @@ cgroup_get_version()
# Can be safely called even when no setup has been done
cgroup_cleanup()
{
- [ "$_cgroup_state" = "" ] && return 0
+ [ "$_cgroup_state" ] || return 0
ROD tst_cgctl cleanup "$_cgroup_state"
@@ -91,7 +91,7 @@ cgroup_get_task_list()
local ctrl="$1"
local version
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_get_task_list: controller not defined"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_get_task_list: controller not defined"
version=$(cgroup_get_version "$ctrl")
@@ -111,7 +111,7 @@ cgroup_require()
local ctrl="$1"
local ret
- [ $# -eq 0 ] && tst_brk TBROK "cgroup_require: controller not defined"
+ [ "$ctrl" ] || tst_brk TBROK "cgroup_require: controller not defined"
[ ! -f /proc/cgroups ] && tst_brk TCONF "Kernel does not support control groups"
@@ -124,11 +124,11 @@ cgroup_require()
fi
if [ $ret -ne 0 ]; then
- tst_brk TBROK "'tst_cgctl require' exited."
+ tst_brk TBROK "'tst_cgctl require' exited"
return $ret
fi
- [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_require: No state was set after call to tst_cgctl require?"
+ [ "$_cgroup_state" ] || tst_brk TBROK "cgroup_require: No state was set after call to tst_cgctl require?"
return 0
}
diff --git testcases/kernel/controllers/memcg/control/memcg_control_test.sh testcases/kernel/controllers/memcg/control/memcg_control_test.sh
index f96ed3abb..093d50c2a 100644
--- testcases/kernel/controllers/memcg/control/memcg_control_test.sh
+++ testcases/kernel/controllers/memcg/control/memcg_control_test.sh
@@ -23,7 +23,7 @@ test_proc_kill()
{
mem_process -m $PROC_MEM &
sleep 1
- ROD echo $! > "$test_dir/$task_list"
+ ROD echo $! \> "$test_dir/$task_list"
#Instruct the test process to start acquiring memory
echo m > $STATUS_PIPE
@@ -46,8 +46,8 @@ test1()
tst_res TINFO "Test #1: Checking if the memory usage limit imposed by the topmost group is enforced"
- ROD echo "$ACTIVE_MEM_LIMIT" > "$test_dir/$memory_limit"
- ROD echo "$TOT_MEM_LIMIT" > "$test_dir/$memsw_memory_limit"
+ ROD echo "$ACTIVE_MEM_LIMIT" \> "$test_dir/$memory_limit"
+ ROD echo "$TOT_MEM_LIMIT" \> "$test_dir/$memsw_memory_limit"
KILLED_CNT=0
test_proc_kill
diff --git testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
index bc8a1c661..94d4e4c00 100755
--- testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
+++ testcases/kernel/controllers/memcg/regression/memcg_regression_test.sh
@@ -111,7 +111,7 @@ test_1()
test_path="$test_dir/0"
create_testpath "$test_path"
- ROD echo 0 > "$test_path/$memory_limit"
+ ROD echo 0 \> "$test_path/$memory_limit"
./memcg_test_1 "$test_path/$task_list"
@@ -149,7 +149,7 @@ test_2()
sleep 1
create_testpath "$test_path"
- ROD echo $pid1 > "$test_path"/tasks
+ ROD echo $pid1 \> "$test_path"/tasks
# let pid1 'test_2' allocate memory
/bin/kill -SIGUSR1 $pid1
diff --git testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
index d38c650ea..cb52840d7 100755
--- testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
+++ testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh
@@ -26,7 +26,7 @@ setup()
test_path=$(cgroup_get_test_path "memory")
task_list=$(cgroup_get_task_list "memory")
if [ "$cgroup_version" = "2" ]; then
- ROD echo "+memory" > "$test_path/cgroup.subtree_control"
+ ROD echo "+memory" \> "$test_path/cgroup.subtree_control"
fi
tst_res TINFO "test starts with cgroup version $cgroup_version"
@@ -68,7 +68,7 @@ run_stress()
for i in $(seq 0 $(($cgroups-1))); do
ROD mkdir "$test_path/$i"
memcg_process_stress $mem_size $interval &
- ROD echo $! > "$test_path/$i/$task_list"
+ ROD echo $! \> "$test_path/$i/$task_list"
pids="$pids $!"
done
diff --git testcases/lib/tst_cgctl.c testcases/lib/tst_cgctl.c
index 8ef615a56..2685bef81 100644
--- testcases/lib/tst_cgctl.c
+++ testcases/lib/tst_cgctl.c
@@ -12,7 +12,7 @@
static void cgctl_usage(void)
{
- fprintf(stderr, "Usage: tst_cgctl require [controller] [test_pid]\n\tcleanup [config (output of tst_cg_print_config)]\n\tprint\n\t help\n");
+ fprintf(stderr, "Usage: tst_cgctl require [controller] [test_pid]\n\tcleanup [config (output of tst_cg_print_config)]\n\tprint\n\thelp\n");
}
static int cgctl_require(const char *ctrl, int test_pid)
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library
2022-07-27 10:14 ` Petr Vorel
@ 2022-07-27 12:13 ` Petr Vorel
0 siblings, 0 replies; 15+ messages in thread
From: Petr Vorel @ 2022-07-27 12:13 UTC (permalink / raw)
To: Li Wang, LTP List, Luke Nowakowski-Krijger, Richard Palethorpe
Hi all,
patchset merged.
Luke, thanks a lot for amazing work, others for review!
FYI with these fixes there are only 6 tests failing on openSUSE Tumbleweed setup:
* memcg_stress: timeout after 15 min
* memcontrol04
memcontrol04.c:214: TFAIL: Expect: (F low events=379) == 0
* controllers
TEST 1: CPU CONTROLLER TESTING
RUNNING SETUP.....
ERROR: Could not mount cgroup filesystem on /dev/cpuctl..Exiting test
Cleanup called
cat: /dev/cpuctl/group_def/tasks: No such file or directory
...
Cleanup done for latency test 2
mount: /dev/cpuctl: cpuctl already mounted or mount point busy.
cpuctl_test_fj 1 TFAIL : ltpapicmd.c:188: failed to mount cpu subsystem... Exiting
cpuctl_test_fj 1 TFAIL : ltpapicmd.c:188: case1 FAIL
* cpuset_inherit
cpuset_inherit 1 TFAIL: Could not mount cgroup filesystem with cpuset on /dev/cpuset..Exiting test
* cpuset_hotplug
cpuset_hotplug 1 TFAIL: Could not mount cgroup filesystem with cpuset on /dev/cpuset..Exiting test
* cpuset_regression_test
cpuset_regression_test 1 TBROK: Both cpuset.cpu_exclusive and cpu_exclusive do not exist
Kind regards,
Petr
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library
2022-07-26 22:13 ` [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library Luke Nowakowski-Krijger
@ 2022-07-27 12:20 ` Petr Vorel
0 siblings, 0 replies; 15+ messages in thread
From: Petr Vorel @ 2022-07-27 12:20 UTC (permalink / raw)
To: Luke Nowakowski-Krijger; +Cc: ltp
Hi Luke,
> v5->v6: Added $ret to capture return code and added return $ret
> after tst_brk calls.
> testcases/kernel/controllers/cgroup_lib.sh | 137 ++++++++++++++++++---
...
> +# Mounts and configures the given controller
> +# USAGE: cgroup_require CONTROLLER
> +cgroup_require()
> +{
> + local ctrl="$1"
> + local ret
> +
> + [ $# -eq 0 ] && tst_brk TBROK "cgroup_require: controller not defined"
> +
> + [ ! -f /proc/cgroups ] && tst_brk TCONF "Kernel does not support control groups"
> +
> + _cgroup_state=$(tst_cgctl require "$ctrl" $$)
> + ret=$?
> +
> + if [ $ret -eq 32 ]; then
> + tst_brk TCONF "'tst_cgctl require' exited. Controller is probably not available?"
> + return $ret
FYI I merged this part as is, but I'd personally avoid using return in TCONF:
1) return value is not anywhere used, thus plain return would be enough.
2) Keeping $? in $ret helps to avoid first TBROK ("'tst_cgctl require' exited") and
second TBROK will not be presented due $_cgroup_state being empty on error (you
print all errors to stderr.
My concern was just not to overwrite $?
Kind regards,
Petr
> + fi
> +
> + if [ $ret -ne 0 ]; then
> + tst_brk TBROK "'tst_cgctl require' exited."
> + return $ret
> + fi
> +
> + [ "$_cgroup_state" = "" ] && tst_brk TBROK "cgroup_require: No state was set after call to tst_cgctl require?"
> +
> + return 0
> }
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2022-07-27 12:20 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-26 22:13 [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 01/10] testcases/lib: Implement tst_cgctl binary Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 02/10] controllers: Expand cgroup_lib shell library Luke Nowakowski-Krijger
2022-07-27 12:20 ` Petr Vorel
2022-07-26 22:13 ` [LTP] [PATCH v6 03/10] controllers: Update cgroup_fj_* to use newer cgroup lib and test lib Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 04/10] controllers: Update memcg_control_test to newer test lib and cgroup lib Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 05/10] controllers: Update memcg/regression/* to new test " Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 06/10] controllers: Update memcg_stress_test to use newer " Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 07/10] controllers: update memcg/functional " Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 08/10] controllers: Update pids.sh " Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 09/10] controllers: update cpuset_regression_test.sh " Luke Nowakowski-Krijger
2022-07-26 22:13 ` [LTP] [PATCH v6 10/10] controllers: update cgroup_regression_test " Luke Nowakowski-Krijger
2022-07-27 6:34 ` [LTP] [PATCH v6 00/10] Expand cgroup_lib shell library Li Wang
2022-07-27 10:14 ` Petr Vorel
2022-07-27 12:13 ` Petr Vorel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.