* [PATCH v3 0/3] Remove bad uncore filter/events
@ 2022-08-05 1:38 Ian Rogers
2022-08-05 1:38 ` [PATCH v3 1/3] perf vendor events: Remove bad broadwellde uncore events Ian Rogers
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Ian Rogers @ 2022-08-05 1:38 UTC (permalink / raw)
To: Zhengjun Xing, Kan Liang, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, linux-perf-users, linux-kernel
Cc: Stephane Eranian, Ian Rogers
The event converter scripts at:
https://github.com/intel/event-converter-for-linux-perf
passes Filter values from data on 01.org that is bogus in a perf command
line and can cause perf to infinitely recurse in parse events. Remove
such events or filter using the updated patch:
https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
v3. Removed filters rather than events in some cases as Suggested-by:
Liang, Kan <kan.liang@linux.intel.com>
v2. Manually fixed a broken \\Inbound\\ ivytown event.
Ian Rogers (3):
perf vendor events: Remove bad broadwellde uncore events
perf vendor events: Remove bad ivytown uncore events
perf vendor events: Remove bad jaketown uncore events
.../arch/x86/broadwellde/uncore-cache.json | 97 -------------------
.../arch/x86/broadwellde/uncore-other.json | 13 ---
.../arch/x86/ivytown/uncore-cache.json | 90 -----------------
.../arch/x86/ivytown/uncore-interconnect.json | 1 -
.../arch/x86/ivytown/uncore-other.json | 13 ---
.../arch/x86/ivytown/uncore-power.json | 19 ----
.../arch/x86/jaketown/uncore-cache.json | 30 ------
.../arch/x86/jaketown/uncore-other.json | 13 ---
.../arch/x86/jaketown/uncore-power.json | 11 ---
9 files changed, 287 deletions(-)
--
2.37.1.559.g78731f0fdb-goog
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 1/3] perf vendor events: Remove bad broadwellde uncore events
2022-08-05 1:38 [PATCH v3 0/3] Remove bad uncore filter/events Ian Rogers
@ 2022-08-05 1:38 ` Ian Rogers
2022-08-05 1:38 ` [PATCH v3 2/3] perf vendor events: Remove bad ivytown " Ian Rogers
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Ian Rogers @ 2022-08-05 1:38 UTC (permalink / raw)
To: Zhengjun Xing, Kan Liang, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, linux-perf-users, linux-kernel
Cc: Stephane Eranian, Ian Rogers
The event converter scripts at:
https://github.com/intel/event-converter-for-linux-perf
passes Filter values from data on 01.org that is bogus in a perf command
line and can cause perf to infinitely recurse in parse events. Remove
such events or filters using the updated patch:
https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
Fixes: ef908a192512 ("perf vendor events: Update Intel broadwellde")
Signed-off-by: Ian Rogers <irogers@google.com>
---
.../arch/x86/broadwellde/uncore-cache.json | 97 -------------------
.../arch/x86/broadwellde/uncore-other.json | 13 ---
2 files changed, 110 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
index caadbca1b15b..c4d154944ab6 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
@@ -37,7 +37,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.ANY",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for any transaction originating from the IPQ or IRQ. This does not include lookups originating from the ISMQ.",
"UMask": "0x11",
@@ -48,7 +47,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.DATA_READ",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x3",
@@ -59,7 +57,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.NID",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x41",
@@ -70,7 +67,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.READ",
- "Filter": "CBoFilter0[22:18]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x21",
@@ -81,7 +77,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.REMOTE_SNOOP",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for only snoop requests coming from the remote socket(s) through the IPQ.",
"UMask": "0x9",
@@ -92,7 +87,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cachable and UC.",
"UMask": "0x5",
@@ -153,7 +147,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.NID",
- "Filter": "CBoFilter1[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x40",
@@ -794,7 +787,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x28",
"EventName": "UNC_C_RxR_IPQ_RETRY2.TARGET",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request from the IPQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
@@ -845,7 +837,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.NID",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x40",
@@ -896,7 +887,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_C_RxR_IRQ_RETRY2.TARGET",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IPQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
@@ -937,7 +927,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.NID",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x40",
@@ -968,7 +957,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.WB_CREDITS",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x80",
@@ -999,7 +987,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x2A",
"EventName": "UNC_C_RxR_ISMQ_RETRY2.TARGET",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the ISMQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
@@ -1114,7 +1101,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x21",
@@ -1135,7 +1121,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x23",
@@ -1146,7 +1131,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"UMask": "0x3",
@@ -1167,7 +1151,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x83",
@@ -1178,7 +1161,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
@@ -1189,7 +1171,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
"UMask": "0x44",
@@ -1200,7 +1181,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
"UMask": "0x4A",
@@ -1211,7 +1191,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x43",
@@ -1222,7 +1201,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x41",
@@ -1233,7 +1211,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_WB",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
"UMask": "0x50",
@@ -1244,7 +1221,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"UMask": "0x1",
@@ -1265,7 +1241,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x81",
@@ -1312,7 +1287,6 @@
"BriefDescription": "TOR Occupancy; Local Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x21",
@@ -1340,7 +1314,6 @@
"BriefDescription": "TOR Occupancy; Misses to Local Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x23",
@@ -1350,7 +1323,6 @@
"BriefDescription": "TOR Occupancy; Miss Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries for miss transactions that match an opcode. This generally means that the request was sent to memory or MMIO.",
"UMask": "0x3",
@@ -1369,7 +1341,6 @@
"BriefDescription": "TOR Occupancy; Misses to Remote Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x83",
@@ -1379,7 +1350,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of NID matched outstanding requests in the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid.In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
@@ -1389,7 +1359,6 @@
"BriefDescription": "TOR Occupancy; NID Matched Evictions",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_EVICTION",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding NID matched eviction transactions in the TOR .",
"UMask": "0x44",
@@ -1399,7 +1368,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID.",
"UMask": "0x4A",
@@ -1409,7 +1377,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched Miss",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID and an opcode.",
"UMask": "0x43",
@@ -1419,7 +1386,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match a NID and an opcode.",
"UMask": "0x41",
@@ -1429,7 +1395,6 @@
"BriefDescription": "TOR Occupancy; NID Matched Writebacks",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_WB",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); NID matched write transactions int the TOR.",
"UMask": "0x50",
@@ -1439,7 +1404,6 @@
"BriefDescription": "TOR Occupancy; Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc).",
"UMask": "0x1",
@@ -1458,7 +1422,6 @@
"BriefDescription": "TOR Occupancy; Remote Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x81",
@@ -1610,66 +1573,6 @@
"UMask": "0x8",
"Unit": "CBO"
},
- {
- "BriefDescription": "QPI Address/Opcode Match; AD Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.AD",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x4",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Address",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.ADDR",
- "Filter": "HA_AddrMatch0[31:6], HA_AddrMatch1[13:0]",
- "PerPkg": "1",
- "UMask": "0x1",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; AK Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.AK",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x10",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; BL Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.BL",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x8",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Address & Opcode Match",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.FILT",
- "Filter": "HA_AddrMatch0[31:6], HA_AddrMatch1[13:0], HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x3",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Opcode",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.OPC",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x2",
- "Unit": "HA"
- },
{
"BriefDescription": "BT Cycles Not Empty",
"Counter": "0,1,2,3",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
index 71bdf75d8016..fc7e0867fcc5 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
@@ -416,17 +416,6 @@
"UMask": "0x10",
"Unit": "IRP"
},
- {
- "BriefDescription": "Inbound Transaction Count; Select Source",
- "Counter": "0,1",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.ORDERINGQ",
- "Filter": "IRPFilter[4:0]",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only those requests that come from the port specified in the IRP_PmonFilter.OrderingQ register. This register allows one to select one specific queue. It is not possible to monitor multiple queues at a time. If this bit is not set, then requests from all sources will be counted.",
- "UMask": "0x40",
- "Unit": "IRP"
- },
{
"BriefDescription": "Inbound Transaction Count; Other",
"Counter": "0,1",
@@ -1117,7 +1106,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x1",
@@ -1138,7 +1126,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x4",
--
2.37.1.559.g78731f0fdb-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 2/3] perf vendor events: Remove bad ivytown uncore events
2022-08-05 1:38 [PATCH v3 0/3] Remove bad uncore filter/events Ian Rogers
2022-08-05 1:38 ` [PATCH v3 1/3] perf vendor events: Remove bad broadwellde uncore events Ian Rogers
@ 2022-08-05 1:38 ` Ian Rogers
2022-08-05 1:38 ` [PATCH v3 3/3] perf vendor events: Remove bad jaketown " Ian Rogers
2022-08-05 14:45 ` [PATCH v3 0/3] Remove bad uncore filter/events Liang, Kan
3 siblings, 0 replies; 6+ messages in thread
From: Ian Rogers @ 2022-08-05 1:38 UTC (permalink / raw)
To: Zhengjun Xing, Kan Liang, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, linux-perf-users, linux-kernel
Cc: Stephane Eranian, Ian Rogers
The event converter scripts at:
https://github.com/intel/event-converter-for-linux-perf
passes Filter values from data on 01.org that is bogus in a perf command
line and can cause perf to infinitely recurse in parse events. Remove
such events or filters using the updated patch:
https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
Fixes: 6220136831e3 ("perf vendor events: Update Intel ivytown")
Signed-off-by: Ian Rogers <irogers@google.com>
---
.../arch/x86/ivytown/uncore-cache.json | 90 -------------------
.../arch/x86/ivytown/uncore-interconnect.json | 1 -
.../arch/x86/ivytown/uncore-other.json | 13 ---
.../arch/x86/ivytown/uncore-power.json | 19 ----
4 files changed, 123 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
index 1e53bee8af5c..93e07385eeec 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
@@ -20,7 +20,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.ANY",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Filters for any transaction originating from the IPQ or IRQ. This does not include lookups originating from the ISMQ.",
"UMask": "0x11",
@@ -31,7 +30,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.DATA_READ",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Read transactions",
"UMask": "0x3",
@@ -42,7 +40,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.NID",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x41",
@@ -53,7 +50,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.REMOTE_SNOOP",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Filters for only snoop requests coming from the remote socket(s) through the IPQ.",
"UMask": "0x9",
@@ -64,7 +60,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
- "Filter": "CBoFilter0[23:17]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cachable and UC.",
"UMask": "0x5",
@@ -105,7 +100,6 @@
"Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.NID",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x40",
@@ -1034,7 +1028,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x21",
@@ -1055,7 +1048,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x23",
@@ -1066,7 +1058,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"UMask": "0x3",
@@ -1087,7 +1078,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x83",
@@ -1098,7 +1088,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
@@ -1109,7 +1098,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
"UMask": "0x44",
@@ -1120,7 +1108,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
"UMask": "0x4A",
@@ -1131,7 +1118,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x43",
@@ -1142,7 +1128,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x41",
@@ -1153,7 +1138,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_WB",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
"UMask": "0x50",
@@ -1164,7 +1148,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"UMask": "0x1",
@@ -1185,7 +1168,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x81",
@@ -1232,7 +1214,6 @@
"BriefDescription": "TOR Occupancy; Local Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x21",
@@ -1260,7 +1241,6 @@
"BriefDescription": "TOR Occupancy; Misses to Local Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
"UMask": "0x23",
@@ -1270,7 +1250,6 @@
"BriefDescription": "TOR Occupancy; Miss Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries for miss transactions that match an opcode. This generally means that the request was sent to memory or MMIO.",
"UMask": "0x3",
@@ -1289,7 +1268,6 @@
"BriefDescription": "TOR Occupancy; Misses to Remote Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x83",
@@ -1299,7 +1277,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of NID matched outstanding requests in the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid.In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
@@ -1309,7 +1286,6 @@
"BriefDescription": "TOR Occupancy; NID Matched Evictions",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_EVICTION",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding NID matched eviction transactions in the TOR .",
"UMask": "0x44",
@@ -1319,7 +1295,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_ALL",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID.",
"UMask": "0x4A",
@@ -1329,7 +1304,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched Miss",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID and an opcode.",
"UMask": "0x43",
@@ -1339,7 +1313,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_OPCODE",
- "Filter": "CBoFilter1[28:20], CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match a NID and an opcode.",
"UMask": "0x41",
@@ -1349,7 +1322,6 @@
"BriefDescription": "TOR Occupancy; NID Matched Writebacks",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_WB",
- "Filter": "CBoFilter1[15:0]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); NID matched write transactions int the TOR.",
"UMask": "0x50",
@@ -1359,7 +1331,6 @@
"BriefDescription": "TOR Occupancy; Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc).",
"UMask": "0x1",
@@ -1378,7 +1349,6 @@
"BriefDescription": "TOR Occupancy; Remote Memory - Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
- "Filter": "CBoFilter1[28:20]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
"UMask": "0x81",
@@ -1520,66 +1490,6 @@
"UMask": "0x8",
"Unit": "CBO"
},
- {
- "BriefDescription": "QPI Address/Opcode Match; AD Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.AD",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x4",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Address",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.ADDR",
- "Filter": "HA_AddrMatch0[31:6], HA_AddrMatch1[13:0]",
- "PerPkg": "1",
- "UMask": "0x1",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; AK Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.AK",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x10",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; BL Opcodes",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.BL",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x8",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Address & Opcode Match",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.FILT",
- "Filter": "HA_AddrMatch0[31:6], HA_AddrMatch1[13:0], HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x3",
- "Unit": "HA"
- },
- {
- "BriefDescription": "QPI Address/Opcode Match; Opcode",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.OPC",
- "Filter": "HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x2",
- "Unit": "HA"
- },
{
"BriefDescription": "BT Bypass",
"Counter": "0,1,2,3",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
index b50685fbde12..b3b1a08d4acf 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
@@ -14,7 +14,6 @@
"EventCode": "0x38",
"EventName": "UNC_Q_CTO_COUNT",
"ExtSel": "1",
- "Filter": "QPIMask0[17:0],QPIMatch0[17:0],QPIMask1[19:16],QPIMatch1[19:16]",
"PerPkg": "1",
"PublicDescription": "Counts the number of CTO (cluster trigger outs) events that were asserted across the two slots. If both slots trigger in a given cycle, the event will increment by 2. You can use edge detect to count the number of cases when both events triggered.",
"Unit": "QPI LL"
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
index aa7a5059d79f..af289aa6c98e 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
@@ -247,17 +247,6 @@
"UMask": "0x2",
"Unit": "IRP"
},
- {
- "BriefDescription": "Inbound Transaction Count; Select Source",
- "Counter": "0,1",
- "EventCode": "0x15",
- "EventName": "UNC_I_TRANSACTIONS.ORDERINGQ",
- "Filter": "IRPFilter[4:0]",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only those requests that come from the port specified in the IRP_PmonFilter.OrderingQ register. This register allows one to select one specific queue. It is not possible to monitor multiple queues at a time. If this bit is not set, then requests from all sources will be counted.",
- "UMask": "0x8",
- "Unit": "IRP"
- },
{
"BriefDescription": "Inbound Transaction Count: Read Prefetches",
"Counter": "0,1",
@@ -2274,7 +2263,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x1",
@@ -2295,7 +2283,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x4",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
index 304d861c368f..0ba63a97ddfa 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
@@ -297,7 +297,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_P_DEMOTIONS_CORE0",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -307,7 +306,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_P_DEMOTIONS_CORE1",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -317,7 +315,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x42",
"EventName": "UNC_P_DEMOTIONS_CORE10",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -327,7 +324,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_P_DEMOTIONS_CORE11",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -337,7 +333,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x44",
"EventName": "UNC_P_DEMOTIONS_CORE12",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -347,7 +342,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x45",
"EventName": "UNC_P_DEMOTIONS_CORE13",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -357,7 +351,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x46",
"EventName": "UNC_P_DEMOTIONS_CORE14",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -367,7 +360,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_P_DEMOTIONS_CORE2",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -377,7 +369,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_P_DEMOTIONS_CORE3",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -387,7 +378,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_P_DEMOTIONS_CORE4",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -397,7 +387,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_P_DEMOTIONS_CORE5",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -407,7 +396,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_P_DEMOTIONS_CORE6",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -417,7 +405,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_P_DEMOTIONS_CORE7",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -427,7 +414,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_P_DEMOTIONS_CORE8",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -437,7 +423,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_P_DEMOTIONS_CORE9",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -447,7 +432,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_BAND0_CYCLES",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -457,7 +441,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_BAND1_CYCLES",
- "Filter": "PCUFilter[15:8]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -467,7 +450,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_BAND2_CYCLES",
- "Filter": "PCUFilter[23:16]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -477,7 +459,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_BAND3_CYCLES",
- "Filter": "PCUFilter[31:24]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
--
2.37.1.559.g78731f0fdb-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] perf vendor events: Remove bad jaketown uncore events
2022-08-05 1:38 [PATCH v3 0/3] Remove bad uncore filter/events Ian Rogers
2022-08-05 1:38 ` [PATCH v3 1/3] perf vendor events: Remove bad broadwellde uncore events Ian Rogers
2022-08-05 1:38 ` [PATCH v3 2/3] perf vendor events: Remove bad ivytown " Ian Rogers
@ 2022-08-05 1:38 ` Ian Rogers
2022-08-05 14:45 ` [PATCH v3 0/3] Remove bad uncore filter/events Liang, Kan
3 siblings, 0 replies; 6+ messages in thread
From: Ian Rogers @ 2022-08-05 1:38 UTC (permalink / raw)
To: Zhengjun Xing, Kan Liang, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, linux-perf-users, linux-kernel
Cc: Stephane Eranian, Ian Rogers
The event converter scripts at:
https://github.com/intel/event-converter-for-linux-perf
passes Filter values from data on 01.org that is bogus in a perf command
line and can cause perf to infinitely recurse in parse events. Remove
such events or filters using the updated patch:
https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
Fixes: 376d8b581b76 ("perf vendor events: Update Intel jaketown")
Signed-off-by: Ian Rogers <irogers@google.com>
---
.../arch/x86/jaketown/uncore-cache.json | 30 -------------------
.../arch/x86/jaketown/uncore-other.json | 13 --------
.../arch/x86/jaketown/uncore-power.json | 11 -------
3 files changed, 54 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
index cf28ffa778ba..351f8b040ed1 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
@@ -20,7 +20,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.DATA_READ",
- "Filter": "CBoFilter[22:18]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.",
"UMask": "0x3",
@@ -31,7 +30,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.NID",
- "Filter": "CBoFilter[22:18], CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.",
"UMask": "0x41",
@@ -42,7 +40,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.REMOTE_SNOOP",
- "Filter": "CBoFilter[22:18]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.",
"UMask": "0x9",
@@ -53,7 +50,6 @@
"Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
- "Filter": "CBoFilter[22:18]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set filter mask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.",
"UMask": "0x5",
@@ -94,7 +90,6 @@
"Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.NID",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x40",
@@ -613,7 +608,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
- "Filter": "CBoFilter[31:23]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x3",
@@ -624,7 +618,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_ALL",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x48",
@@ -635,7 +628,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x44",
@@ -646,7 +638,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x4a",
@@ -657,7 +648,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
- "Filter": "CBoFilter[31:23], CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x43",
@@ -668,7 +658,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
- "Filter": "CBoFilter[31:23], CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x41",
@@ -679,7 +668,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_WB",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x50",
@@ -690,7 +678,6 @@
"Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.OPCODE",
- "Filter": "CBoFilter[31:23]",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
"UMask": "0x1",
@@ -737,7 +724,6 @@
"BriefDescription": "TOR Occupancy; Miss Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_OPCODE",
- "Filter": "CBoFilter[31:23]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x3",
@@ -747,7 +733,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_ALL",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x48",
@@ -757,7 +742,6 @@
"BriefDescription": "TOR Occupancy; NID Matched Evictions",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_EVICTION",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x44",
@@ -767,7 +751,6 @@
"BriefDescription": "TOR Occupancy; NID Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_ALL",
- "Filter": "CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x4a",
@@ -777,7 +760,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched Miss",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_OPCODE",
- "Filter": "CBoFilter[31:23], CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x43",
@@ -787,7 +769,6 @@
"BriefDescription": "TOR Occupancy; NID and Opcode Matched",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.NID_OPCODE",
- "Filter": "CBoFilter[31:23], CBoFilter[17:10]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x41",
@@ -797,7 +778,6 @@
"BriefDescription": "TOR Occupancy; Opcode Match",
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.OPCODE",
- "Filter": "CBoFilter[31:23]",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x1",
@@ -893,16 +873,6 @@
"UMask": "0x4",
"Unit": "CBO"
},
- {
- "BriefDescription": "QPI Address/Opcode Match; Address & Opcode Match",
- "Counter": "0,1,2,3",
- "EventCode": "0x20",
- "EventName": "UNC_H_ADDR_OPC_MATCH.FILT",
- "Filter": "HA_AddrMatch0[31:6], HA_AddrMatch1[13:0], HA_OpcodeMatch[5:0]",
- "PerPkg": "1",
- "UMask": "0x3",
- "Unit": "HA"
- },
{
"BriefDescription": "HA to iMC Bypass; Not Taken",
"Counter": "0,1,2,3",
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
index 99fc673c59e9..588549a668bd 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
@@ -247,17 +247,6 @@
"UMask": "0x2",
"Unit": "IRP"
},
- {
- "BriefDescription": "Inbound Transaction Count; Select Source",
- "Counter": "0,1",
- "EventCode": "0x15",
- "EventName": "UNC_I_TRANSACTIONS.ORDERINGQ",
- "Filter": "IRPFilter[4:0]",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of 'Inbound' transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.",
- "UMask": "0x8",
- "Unit": "IRP"
- },
{
"BriefDescription": "Inbound Transaction Count; Read Prefetches",
"Counter": "0,1",
@@ -1378,7 +1367,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x1",
@@ -1399,7 +1387,6 @@
"Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
- "Filter": "UBoxFilter[3:0]",
"PerPkg": "1",
"PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
"UMask": "0x4",
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
index 04228344cb9c..817ea6d7f785 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
@@ -92,7 +92,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_P_DEMOTIONS_CORE0",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -102,7 +101,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_P_DEMOTIONS_CORE1",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -121,7 +119,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_P_DEMOTIONS_CORE3",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -131,7 +128,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_P_DEMOTIONS_CORE4",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -141,7 +137,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_P_DEMOTIONS_CORE5",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -151,7 +146,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_P_DEMOTIONS_CORE6",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -161,7 +155,6 @@
"Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_P_DEMOTIONS_CORE7",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of times when a configurable cores had a C-state demotion",
"Unit": "PCU"
@@ -171,7 +164,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_BAND0_CYCLES",
- "Filter": "PCUFilter[7:0]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -181,7 +173,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_BAND1_CYCLES",
- "Filter": "PCUFilter[15:8]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -191,7 +182,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_BAND2_CYCLES",
- "Filter": "PCUFilter[23:16]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
@@ -201,7 +191,6 @@
"Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_BAND3_CYCLES",
- "Filter": "PCUFilter[31:24]",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the uncore was running at a frequency greater than or equal to the frequency that is configured in the filter. One can use all four counters with this event, so it is possible to track up to 4 configurable bands. One can use edge detect in conjunction with this event to track the number of times that we transitioned into a frequency greater than or equal to the configurable frequency. One can also use inversion to track cycles when we were less than the configured frequency.",
"Unit": "PCU"
--
2.37.1.559.g78731f0fdb-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/3] Remove bad uncore filter/events
2022-08-05 1:38 [PATCH v3 0/3] Remove bad uncore filter/events Ian Rogers
` (2 preceding siblings ...)
2022-08-05 1:38 ` [PATCH v3 3/3] perf vendor events: Remove bad jaketown " Ian Rogers
@ 2022-08-05 14:45 ` Liang, Kan
2022-08-09 19:43 ` Arnaldo Carvalho de Melo
3 siblings, 1 reply; 6+ messages in thread
From: Liang, Kan @ 2022-08-05 14:45 UTC (permalink / raw)
To: Ian Rogers, Zhengjun Xing, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin,
Jiri Olsa, Namhyung Kim, linux-perf-users, linux-kernel
Cc: Stephane Eranian
On 2022-08-04 9:38 p.m., Ian Rogers wrote:
> The event converter scripts at:
> https://github.com/intel/event-converter-for-linux-perf
> passes Filter values from data on 01.org that is bogus in a perf command
> line and can cause perf to infinitely recurse in parse events. Remove
> such events or filter using the updated patch:
> https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
>
> v3. Removed filters rather than events in some cases as Suggested-by:
> Liang, Kan <kan.liang@linux.intel.com>
> v2. Manually fixed a broken \\Inbound\\ ivytown event.
>
> Ian Rogers (3):
> perf vendor events: Remove bad broadwellde uncore events
> perf vendor events: Remove bad ivytown uncore events
> perf vendor events: Remove bad jaketown uncore events
>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Thanks,
Kan
> .../arch/x86/broadwellde/uncore-cache.json | 97 -------------------
> .../arch/x86/broadwellde/uncore-other.json | 13 ---
> .../arch/x86/ivytown/uncore-cache.json | 90 -----------------
> .../arch/x86/ivytown/uncore-interconnect.json | 1 -
> .../arch/x86/ivytown/uncore-other.json | 13 ---
> .../arch/x86/ivytown/uncore-power.json | 19 ----
> .../arch/x86/jaketown/uncore-cache.json | 30 ------
> .../arch/x86/jaketown/uncore-other.json | 13 ---
> .../arch/x86/jaketown/uncore-power.json | 11 ---
> 9 files changed, 287 deletions(-)
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/3] Remove bad uncore filter/events
2022-08-05 14:45 ` [PATCH v3 0/3] Remove bad uncore filter/events Liang, Kan
@ 2022-08-09 19:43 ` Arnaldo Carvalho de Melo
0 siblings, 0 replies; 6+ messages in thread
From: Arnaldo Carvalho de Melo @ 2022-08-09 19:43 UTC (permalink / raw)
To: Liang, Kan
Cc: Ian Rogers, Zhengjun Xing, Andi Kleen, perry.taylor,
caleb.biggers, kshipra.bopardikar, Peter Zijlstra, Ingo Molnar,
Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
linux-perf-users, linux-kernel, Stephane Eranian
Em Fri, Aug 05, 2022 at 10:45:31AM -0400, Liang, Kan escreveu:
>
>
> On 2022-08-04 9:38 p.m., Ian Rogers wrote:
> > The event converter scripts at:
> > https://github.com/intel/event-converter-for-linux-perf
> > passes Filter values from data on 01.org that is bogus in a perf command
> > line and can cause perf to infinitely recurse in parse events. Remove
> > such events or filter using the updated patch:
> > https://github.com/intel/event-converter-for-linux-perf/pull/15/commits/afd779df99ee41aac646eae1ae5ae651cda3394d
> >
> > v3. Removed filters rather than events in some cases as Suggested-by:
> > Liang, Kan <kan.liang@linux.intel.com>
> > v2. Manually fixed a broken \\Inbound\\ ivytown event.
> >
> > Ian Rogers (3):
> > perf vendor events: Remove bad broadwellde uncore events
> > perf vendor events: Remove bad ivytown uncore events
> > perf vendor events: Remove bad jaketown uncore events
> >
>
> Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Thanks, applied.
- Arnaldo
> Thanks,
> Kan
>
> > .../arch/x86/broadwellde/uncore-cache.json | 97 -------------------
> > .../arch/x86/broadwellde/uncore-other.json | 13 ---
> > .../arch/x86/ivytown/uncore-cache.json | 90 -----------------
> > .../arch/x86/ivytown/uncore-interconnect.json | 1 -
> > .../arch/x86/ivytown/uncore-other.json | 13 ---
> > .../arch/x86/ivytown/uncore-power.json | 19 ----
> > .../arch/x86/jaketown/uncore-cache.json | 30 ------
> > .../arch/x86/jaketown/uncore-other.json | 13 ---
> > .../arch/x86/jaketown/uncore-power.json | 11 ---
> > 9 files changed, 287 deletions(-)
> >
--
- Arnaldo
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-08-09 19:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-05 1:38 [PATCH v3 0/3] Remove bad uncore filter/events Ian Rogers
2022-08-05 1:38 ` [PATCH v3 1/3] perf vendor events: Remove bad broadwellde uncore events Ian Rogers
2022-08-05 1:38 ` [PATCH v3 2/3] perf vendor events: Remove bad ivytown " Ian Rogers
2022-08-05 1:38 ` [PATCH v3 3/3] perf vendor events: Remove bad jaketown " Ian Rogers
2022-08-05 14:45 ` [PATCH v3 0/3] Remove bad uncore filter/events Liang, Kan
2022-08-09 19:43 ` Arnaldo Carvalho de Melo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.