* [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards
@ 2022-08-25 16:41 Douglas Anderson
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
` (7 more replies)
0 siblings, 8 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:41 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
AngeloGioacchino Del Regno, Bhupesh Sharma, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, Vinod Koul,
devicetree, linux-arm-msm, linux-kernel
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") several boards were able to
change their regulator mode even though they had nothing listed in
"regulator-allowed-modes". After that commit (and fixes [1]) we'll be
stuck at the initial mode. Discussion of this (again, see [1]) has
resulted in the decision that the old dts files were wrong and should
be fixed to fully restore old functionality.
This series attempts to fix everyone. I've kept each board in a
separate patch to make stable / backports work easier.
Affected boards were found with:
rpmh_users=$(git grep -l -i rpmh -- arch/arm*/boot/dts/qcom)
set_modes=$(grep -l regulator-allow-set-load ${rpmh_users})
but_no_allowed_modes=$(grep -l -v regulator-allowed-modes ${set_modes})
Fix was applied with:
for f in ${but_no_allowed_modes}; do
sed -i~ -e \
's/^\(\s*\)regulator-allow-set-load;/\1regulator-allow-set-load;\n\1regulator-allowed-modes =\n\1 <RPMH_REGULATOR_MODE_LPM\n\1 RPMH_REGULATOR_MODE_HPM>;/'\
$f
done
Then results were manually inspected. In one board I removed a
"regulator-allow-set-load" from a fixed regulator since that was
clearly wrong.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Douglas Anderson (7):
arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are
allowed
arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are
allowed
arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are
allowed
arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 +++++-
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 45 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 33 ++++++++++++++
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++
.../dts/qcom/sm8150-sony-xperia-kumano.dtsi | 6 +++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 6 +++
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 +++++
7 files changed, 144 insertions(+), 1 deletion(-)
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
@ 2022-08-25 16:41 ` Douglas Anderson
2022-08-25 21:30 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: " Douglas Anderson
` (6 subsequent siblings)
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:41 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Bhupesh Sharma, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ba547ca9fc6b..ddb9cb182152 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
regulator-always-on;
regulator-boot-on;
- regulator-allow-set-load;
vin-supply = <&vreg_3p3>;
};
@@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:33 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: " Douglas Anderson
` (5 subsequent siblings)
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Johan Hovold, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 45 ++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 9398f0349944..6d05cb54e32f 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -36,6 +36,9 @@ vreg_l3a: ldo3 {
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
@@ -44,6 +47,9 @@ vreg_l5a: ldo5 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
@@ -52,6 +58,9 @@ vreg_l7a: ldo7 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
@@ -60,6 +69,9 @@ vreg_l13a: ldo13 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -73,6 +85,9 @@ vreg_l1c: ldo1 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
@@ -81,6 +96,9 @@ vreg_l2c: ldo2 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c: ldo3 {
@@ -89,6 +107,9 @@ vreg_l3c: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
@@ -97,6 +118,9 @@ vreg_l4c: ldo4 {
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c: ldo6 {
@@ -105,6 +129,9 @@ vreg_l6c: ldo6 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
@@ -113,6 +140,9 @@ vreg_l7c: ldo7 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c: ldo10 {
@@ -121,6 +151,9 @@ vreg_l10c: ldo10 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
@@ -129,6 +162,9 @@ vreg_l17c: ldo17 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -142,6 +178,9 @@ vreg_l3g: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7g: ldo7 {
@@ -150,6 +189,9 @@ vreg_l7g: ldo7 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8g: ldo8 {
@@ -158,6 +200,9 @@ vreg_l8g: ldo8 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
};
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
2022-08-25 16:42 ` [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: " Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:35 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: " Douglas Anderson
` (4 subsequent siblings)
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Johan Hovold, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 33 +++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index d6f272c71a47..f64d58e371bd 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -88,6 +88,9 @@ vreg_l3b: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
regulator-boot-on;
regulator-always-on;
};
@@ -98,6 +101,9 @@ vreg_l4b: ldo4 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b: ldo6 {
@@ -106,6 +112,9 @@ vreg_l6b: ldo6 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
regulator-boot-on;
};
};
@@ -120,6 +129,9 @@ vreg_l1c: ldo1 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
@@ -128,6 +140,9 @@ vreg_l7c: ldo7 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c: ldo13 {
@@ -136,6 +151,9 @@ vreg_l13c: ldo13 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -151,6 +169,9 @@ vreg_l3d: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4d: ldo4 {
@@ -159,6 +180,9 @@ vreg_l4d: ldo4 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6d: ldo6 {
@@ -167,6 +191,9 @@ vreg_l6d: ldo6 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7d: ldo7 {
@@ -175,6 +202,9 @@ vreg_l7d: ldo7 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9d: ldo9 {
@@ -183,6 +213,9 @@ vreg_l9d: ldo9 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
};
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
` (2 preceding siblings ...)
2022-08-25 16:42 ` [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: " Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:37 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: " Douglas Anderson
` (3 subsequent siblings)
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Johan Hovold, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 16c6e4d920bb..0c2534b4ec24 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -80,6 +80,9 @@ vreg_l3b: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
regulator-boot-on;
};
@@ -89,6 +92,9 @@ vreg_l4b: ldo4 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b: ldo6 {
@@ -97,6 +103,9 @@ vreg_l6b: ldo6 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
regulator-boot-on;
regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
};
@@ -112,6 +121,9 @@ vreg_l1c: ldo1 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c: ldo12 {
@@ -120,6 +132,9 @@ vreg_l12c: ldo12 {
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c: ldo13 {
@@ -128,6 +143,9 @@ vreg_l13c: ldo13 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -143,6 +161,9 @@ vreg_l3d: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4d: ldo4 {
@@ -151,6 +172,9 @@ vreg_l4d: ldo4 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7d: ldo7 {
@@ -159,6 +183,9 @@ vreg_l7d: ldo7 {
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9d: ldo9 {
@@ -167,6 +194,9 @@ vreg_l9d: ldo9 {
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
};
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
` (3 preceding siblings ...)
2022-08-25 16:42 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: " Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: " Douglas Anderson
` (2 subsequent siblings)
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
AngeloGioacchino Del Regno, Konrad Dybcio, Krzysztof Kozlowski,
Rob Herring, devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index 014fe3a31548..fb6e5a140c9f 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,6 +348,9 @@ vreg_l6c_2p9: ldo6 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
@@ -367,6 +370,9 @@ vreg_l9c_2p9: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
` (4 preceding siblings ...)
2022-08-25 16:42 ` [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: " Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:41 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
2022-08-26 7:02 ` [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Johan Hovold
7 siblings, 2 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 549e0a2aa9fe..5428aab3058d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,6 +317,9 @@ vreg_l6c_2p9: ldo6 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_2p85: ldo7 {
@@ -339,6 +342,9 @@ vreg_l9c_2p9: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
` (5 preceding siblings ...)
2022-08-25 16:42 ` [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: " Douglas Anderson
@ 2022-08-25 16:42 ` Douglas Anderson
2022-08-25 21:41 ` Andrew Halaney
` (2 more replies)
2022-08-26 7:02 ` [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Johan Hovold
7 siblings, 3 replies; 26+ messages in thread
From: Douglas Anderson @ 2022-08-25 16:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Douglas Anderson, Andy Gross,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, Vinod Koul,
devicetree, linux-arm-msm, linux-kernel
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..69ae6503c2f6 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,6 +107,9 @@ vreg_l5b_0p88: ldo5 {
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
@@ -115,6 +118,9 @@ vreg_l6b_1p2: ldo6 {
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p96: ldo7 {
@@ -123,6 +129,9 @@ vreg_l7b_2p96: ldo7 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
@@ -131,6 +140,9 @@ vreg_l9b_1p2: ldo9 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
--
2.37.2.672.g94769d06f0-goog
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
@ 2022-08-25 21:30 ` Andrew Halaney
2022-08-25 21:58 ` Doug Anderson
2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 1 reply; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:30 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Bhupesh Sharma,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:41:59AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index ba547ca9fc6b..ddb9cb182152 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
>
> regulator-always-on;
> regulator-boot-on;
> - regulator-allow-set-load;
I could see this deserving its own commit or a line in the commit
message, but not a big deal to me:
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
>
> vin-supply = <&vreg_3p3>;
> };
> @@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7a_1p8: ldo7 {
> @@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l11a_0p8: ldo11 {
> @@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_1p8: ldo7 {
> @@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: " Douglas Anderson
@ 2022-08-25 21:33 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:33 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:42:00AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 45 ++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 9398f0349944..6d05cb54e32f 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -36,6 +36,9 @@ vreg_l3a: ldo3 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l5a: ldo5 {
> @@ -44,6 +47,9 @@ vreg_l5a: ldo5 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7a: ldo7 {
> @@ -52,6 +58,9 @@ vreg_l7a: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13a: ldo13 {
> @@ -60,6 +69,9 @@ vreg_l13a: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -73,6 +85,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l2c: ldo2 {
> @@ -81,6 +96,9 @@ vreg_l2c: ldo2 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l3c: ldo3 {
> @@ -89,6 +107,9 @@ vreg_l3c: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4c: ldo4 {
> @@ -97,6 +118,9 @@ vreg_l4c: ldo4 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6c: ldo6 {
> @@ -105,6 +129,9 @@ vreg_l6c: ldo6 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c: ldo7 {
> @@ -113,6 +140,9 @@ vreg_l7c: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c: ldo10 {
> @@ -121,6 +151,9 @@ vreg_l10c: ldo10 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l17c: ldo17 {
> @@ -129,6 +162,9 @@ vreg_l17c: ldo17 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -142,6 +178,9 @@ vreg_l3g: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7g: ldo7 {
> @@ -150,6 +189,9 @@ vreg_l7g: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l8g: ldo8 {
> @@ -158,6 +200,9 @@ vreg_l8g: ldo8 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: " Douglas Anderson
@ 2022-08-25 21:35 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:35 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:42:01AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 33 +++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index d6f272c71a47..f64d58e371bd 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -88,6 +88,9 @@ vreg_l3b: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> regulator-always-on;
> };
> @@ -98,6 +101,9 @@ vreg_l4b: ldo4 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b: ldo6 {
> @@ -106,6 +112,9 @@ vreg_l6b: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> };
> };
> @@ -120,6 +129,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c: ldo7 {
> @@ -128,6 +140,9 @@ vreg_l7c: ldo7 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13c: ldo13 {
> @@ -136,6 +151,9 @@ vreg_l13c: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -151,6 +169,9 @@ vreg_l3d: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4d: ldo4 {
> @@ -159,6 +180,9 @@ vreg_l4d: ldo4 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6d: ldo6 {
> @@ -167,6 +191,9 @@ vreg_l6d: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7d: ldo7 {
> @@ -175,6 +202,9 @@ vreg_l7d: ldo7 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9d: ldo9 {
> @@ -183,6 +213,9 @@ vreg_l9d: ldo9 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: " Douglas Anderson
@ 2022-08-25 21:37 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:37 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:42:02AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 16c6e4d920bb..0c2534b4ec24 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -80,6 +80,9 @@ vreg_l3b: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> };
>
> @@ -89,6 +92,9 @@ vreg_l4b: ldo4 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b: ldo6 {
> @@ -97,6 +103,9 @@ vreg_l6b: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
> };
> @@ -112,6 +121,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l12c: ldo12 {
> @@ -120,6 +132,9 @@ vreg_l12c: ldo12 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13c: ldo13 {
> @@ -128,6 +143,9 @@ vreg_l13c: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -143,6 +161,9 @@ vreg_l3d: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4d: ldo4 {
> @@ -151,6 +172,9 @@ vreg_l4d: ldo4 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7d: ldo7 {
> @@ -159,6 +183,9 @@ vreg_l7d: ldo7 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9d: ldo9 {
> @@ -167,6 +194,9 @@ vreg_l9d: ldo9 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: " Douglas Anderson
@ 2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:39 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross,
AngeloGioacchino Del Regno, Konrad Dybcio, Krzysztof Kozlowski,
Rob Herring, devicetree, linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:42:03AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> index 014fe3a31548..fb6e5a140c9f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> @@ -348,6 +348,9 @@ vreg_l6c_2p9: ldo6 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_3p0: ldo7 {
> @@ -367,6 +370,9 @@ vreg_l9c_2p9: ldo9 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: " Douglas Anderson
@ 2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:41 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:39 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Konrad Dybcio,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm,
linux-kernel
On Thu, Aug 25, 2022 at 09:42:04AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index 549e0a2aa9fe..5428aab3058d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -317,6 +317,9 @@ vreg_l6c_2p9: ldo6 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_2p85: ldo7 {
> @@ -339,6 +342,9 @@ vreg_l9c_2p9: ldo9 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
@ 2022-08-25 21:41 ` Andrew Halaney
2022-08-26 4:56 ` Vinod Koul
2022-08-26 18:41 ` Konrad Dybcio
2 siblings, 0 replies; 26+ messages in thread
From: Andrew Halaney @ 2022-08-25 21:41 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Konrad Dybcio,
Krzysztof Kozlowski, Rob Herring, Vinod Koul, devicetree,
linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:42:05AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 0fcf5bd88fc7..69ae6503c2f6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -107,6 +107,9 @@ vreg_l5b_0p88: ldo5 {
> regulator-max-microvolt = <888000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b_1p2: ldo6 {
> @@ -115,6 +118,9 @@ vreg_l6b_1p2: ldo6 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7b_2p96: ldo7 {
> @@ -123,6 +129,9 @@ vreg_l7b_2p96: ldo7 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9b_1p2: ldo9 {
> @@ -131,6 +140,9 @@ vreg_l9b_1p2: ldo9 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> --
> 2.37.2.672.g94769d06f0-goog
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
2022-08-25 21:30 ` Andrew Halaney
@ 2022-08-25 21:58 ` Doug Anderson
0 siblings, 0 replies; 26+ messages in thread
From: Doug Anderson @ 2022-08-25 21:58 UTC (permalink / raw)
To: Andrew Halaney
Cc: Bjorn Andersson, Mark Brown, Andy Gross, Bhupesh Sharma,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm, LKML
Hi,
On Thu, Aug 25, 2022 at 2:31 PM Andrew Halaney <ahalaney@redhat.com> wrote:
>
> On Thu, Aug 25, 2022 at 09:41:59AM -0700, Douglas Anderson wrote:
> > This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> > but doesn't specify any modes with "regulator-allowed-modes".
> >
> > Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> > get_optimum_mode(), not set_load()") the above meant that we were able
> > to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> > be stuck at the initial mode. Discussion of this has resulted in the
> > decision that the old dts files were wrong and should be fixed to
> > fully restore old functionality.
> >
> > Let's re-enable the old functionality by fixing the dts.
> >
> > [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
> >
> > Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> >
> > arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
> > 1 file changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > index ba547ca9fc6b..ddb9cb182152 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> > @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
> >
> > regulator-always-on;
> > regulator-boot-on;
> > - regulator-allow-set-load;
>
> I could see this deserving its own commit or a line in the commit
> message, but not a big deal to me:
>
> Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Ah right. I mentioned it in the cover letter but forgot to mention it
in this commit message.
I'll assume that this isn't a big deal but if Bjorn wants a quick spin
with this mentioned in the commit message (or broken into a separate
commit) then I can do so. I'll wait for direction before spinning,
though.
-Doug
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
2022-08-25 21:41 ` Andrew Halaney
@ 2022-08-26 4:56 ` Vinod Koul
2022-08-26 18:41 ` Konrad Dybcio
2 siblings, 0 replies; 26+ messages in thread
From: Vinod Koul @ 2022-08-26 4:56 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Andrew Halaney, Mark Brown, Andy Gross,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm, linux-kernel
On 25-08-22, 09:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
--
~Vinod
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
` (6 preceding siblings ...)
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
@ 2022-08-26 7:02 ` Johan Hovold
2022-08-29 16:51 ` Doug Anderson
7 siblings, 1 reply; 26+ messages in thread
From: Johan Hovold @ 2022-08-26 7:02 UTC (permalink / raw)
To: Douglas Anderson
Cc: Bjorn Andersson, Andrew Halaney, Mark Brown, Andy Gross,
AngeloGioacchino Del Regno, Bhupesh Sharma, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, Vinod Koul,
devicetree, linux-arm-msm, linux-kernel
On Thu, Aug 25, 2022 at 09:41:58AM -0700, Douglas Anderson wrote:
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") several boards were able to
> change their regulator mode even though they had nothing listed in
> "regulator-allowed-modes". After that commit (and fixes [1]) we'll be
> stuck at the initial mode. Discussion of this (again, see [1]) has
> resulted in the decision that the old dts files were wrong and should
> be fixed to fully restore old functionality.
>
> This series attempts to fix everyone. I've kept each board in a
> separate patch to make stable / backports work easier.
>
> Affected boards were found with:
> rpmh_users=$(git grep -l -i rpmh -- arch/arm*/boot/dts/qcom)
> set_modes=$(grep -l regulator-allow-set-load ${rpmh_users})
> but_no_allowed_modes=$(grep -l -v regulator-allowed-modes ${set_modes})
>
> Fix was applied with:
> for f in ${but_no_allowed_modes}; do
> sed -i~ -e \
> 's/^\(\s*\)regulator-allow-set-load;/\1regulator-allow-set-load;\n\1regulator-allowed-modes =\n\1 <RPMH_REGULATOR_MODE_LPM\n\1 RPMH_REGULATOR_MODE_HPM>;/'\
> $f
> done
>
> Then results were manually inspected. In one board I removed a
> "regulator-allow-set-load" from a fixed regulator since that was
> clearly wrong.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
>
> Douglas Anderson (7):
> arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
> arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
> arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
These two should be rebased on
https://lore.kernel.org/all/20220803121942.30236-1-johan+linaro@kernel.org/
which disallows mode-switching for all but the UFS regulators (this
series addresses the DP PHY LPM regression we've discussed elsewhere).
> arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are
> allowed
And this one should not be needed at all with the above series applied.
> arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are
> allowed
> arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are
> allowed
> arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
Johan
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
2022-08-25 21:30 ` Andrew Halaney
@ 2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:40 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Bhupesh Sharma,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm,
linux-kernel
On 25.08.2022 18:41, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index ba547ca9fc6b..ddb9cb182152 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
>
> regulator-always-on;
> regulator-boot-on;
> - regulator-allow-set-load;
>
> vin-supply = <&vreg_3p3>;
> };
> @@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7a_1p8: ldo7 {
> @@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l11a_0p8: ldo11 {
> @@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_1p8: ldo7 {
> @@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: " Douglas Anderson
2022-08-25 21:33 ` Andrew Halaney
@ 2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:40 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Johan Hovold,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm,
linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 45 ++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 9398f0349944..6d05cb54e32f 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -36,6 +36,9 @@ vreg_l3a: ldo3 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l5a: ldo5 {
> @@ -44,6 +47,9 @@ vreg_l5a: ldo5 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7a: ldo7 {
> @@ -52,6 +58,9 @@ vreg_l7a: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13a: ldo13 {
> @@ -60,6 +69,9 @@ vreg_l13a: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -73,6 +85,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l2c: ldo2 {
> @@ -81,6 +96,9 @@ vreg_l2c: ldo2 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l3c: ldo3 {
> @@ -89,6 +107,9 @@ vreg_l3c: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4c: ldo4 {
> @@ -97,6 +118,9 @@ vreg_l4c: ldo4 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6c: ldo6 {
> @@ -105,6 +129,9 @@ vreg_l6c: ldo6 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c: ldo7 {
> @@ -113,6 +140,9 @@ vreg_l7c: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c: ldo10 {
> @@ -121,6 +151,9 @@ vreg_l10c: ldo10 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l17c: ldo17 {
> @@ -129,6 +162,9 @@ vreg_l17c: ldo17 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -142,6 +178,9 @@ vreg_l3g: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7g: ldo7 {
> @@ -150,6 +189,9 @@ vreg_l7g: ldo7 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l8g: ldo8 {
> @@ -158,6 +200,9 @@ vreg_l8g: ldo8 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: " Douglas Anderson
2022-08-25 21:35 ` Andrew Halaney
@ 2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:40 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Johan Hovold,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm,
linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 33 +++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index d6f272c71a47..f64d58e371bd 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -88,6 +88,9 @@ vreg_l3b: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> regulator-always-on;
> };
> @@ -98,6 +101,9 @@ vreg_l4b: ldo4 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b: ldo6 {
> @@ -106,6 +112,9 @@ vreg_l6b: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> };
> };
> @@ -120,6 +129,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c: ldo7 {
> @@ -128,6 +140,9 @@ vreg_l7c: ldo7 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13c: ldo13 {
> @@ -136,6 +151,9 @@ vreg_l13c: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -151,6 +169,9 @@ vreg_l3d: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4d: ldo4 {
> @@ -159,6 +180,9 @@ vreg_l4d: ldo4 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6d: ldo6 {
> @@ -167,6 +191,9 @@ vreg_l6d: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7d: ldo7 {
> @@ -175,6 +202,9 @@ vreg_l7d: ldo7 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9d: ldo9 {
> @@ -183,6 +213,9 @@ vreg_l9d: ldo9 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: " Douglas Anderson
2022-08-25 21:37 ` Andrew Halaney
@ 2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:40 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Johan Hovold,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm,
linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 16c6e4d920bb..0c2534b4ec24 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -80,6 +80,9 @@ vreg_l3b: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> };
>
> @@ -89,6 +92,9 @@ vreg_l4b: ldo4 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b: ldo6 {
> @@ -97,6 +103,9 @@ vreg_l6b: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
> };
> @@ -112,6 +121,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l12c: ldo12 {
> @@ -120,6 +132,9 @@ vreg_l12c: ldo12 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13c: ldo13 {
> @@ -128,6 +143,9 @@ vreg_l13c: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -143,6 +161,9 @@ vreg_l3d: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4d: ldo4 {
> @@ -151,6 +172,9 @@ vreg_l4d: ldo4 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7d: ldo7 {
> @@ -159,6 +183,9 @@ vreg_l7d: ldo7 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9d: ldo9 {
> @@ -167,6 +194,9 @@ vreg_l9d: ldo9 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: " Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
@ 2022-08-26 18:40 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:40 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross,
AngeloGioacchino Del Regno, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm, linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> index 014fe3a31548..fb6e5a140c9f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
> @@ -348,6 +348,9 @@ vreg_l6c_2p9: ldo6 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_3p0: ldo7 {
> @@ -367,6 +370,9 @@ vreg_l9c_2p9: ldo9 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: " Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
@ 2022-08-26 18:41 ` Konrad Dybcio
1 sibling, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:41 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Krzysztof Kozlowski,
Rob Herring, devicetree, linux-arm-msm, linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index 549e0a2aa9fe..5428aab3058d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -317,6 +317,9 @@ vreg_l6c_2p9: ldo6 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7c_2p85: ldo7 {
> @@ -339,6 +342,9 @@ vreg_l9c_2p9: ldo9 {
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l10c_3p3: ldo10 {
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
2022-08-25 21:41 ` Andrew Halaney
2022-08-26 4:56 ` Vinod Koul
@ 2022-08-26 18:41 ` Konrad Dybcio
2 siblings, 0 replies; 26+ messages in thread
From: Konrad Dybcio @ 2022-08-26 18:41 UTC (permalink / raw)
To: Douglas Anderson, Bjorn Andersson
Cc: Andrew Halaney, Mark Brown, Andy Gross, Krzysztof Kozlowski,
Rob Herring, Vinod Koul, devicetree, linux-arm-msm, linux-kernel
On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
>
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 0fcf5bd88fc7..69ae6503c2f6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -107,6 +107,9 @@ vreg_l5b_0p88: ldo5 {
> regulator-max-microvolt = <888000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b_1p2: ldo6 {
> @@ -115,6 +118,9 @@ vreg_l6b_1p2: ldo6 {
> regulator-max-microvolt = <1208000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7b_2p96: ldo7 {
> @@ -123,6 +129,9 @@ vreg_l7b_2p96: ldo7 {
> regulator-max-microvolt = <2504000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9b_1p2: ldo9 {
> @@ -131,6 +140,9 @@ vreg_l9b_1p2: ldo9 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards
2022-08-26 7:02 ` [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Johan Hovold
@ 2022-08-29 16:51 ` Doug Anderson
0 siblings, 0 replies; 26+ messages in thread
From: Doug Anderson @ 2022-08-29 16:51 UTC (permalink / raw)
To: Johan Hovold
Cc: Bjorn Andersson, Andrew Halaney, Mark Brown, Andy Gross,
AngeloGioacchino Del Regno, Bhupesh Sharma, Johan Hovold,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, Vinod Koul,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm, LKML
Hi,
On Fri, Aug 26, 2022 at 12:02 AM Johan Hovold <johan@kernel.org> wrote:
>
> > Douglas Anderson (7):
> > arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
>
> > arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
> > arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
>
> These two should be rebased on
>
> https://lore.kernel.org/all/20220803121942.30236-1-johan+linaro@kernel.org/
>
> which disallows mode-switching for all but the UFS regulators (this
> series addresses the DP PHY LPM regression we've discussed elsewhere).
>
> > arm64: dts: qcom: sc8280xp-thinkpad-x13s: Specify which LDO modes are
> > allowed
>
> And this one should not be needed at all with the above series applied.
>
> > arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are
> > allowed
> > arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are
> > allowed
> > arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
Thanks! v2 has been sent and it's rebased upon your series:
https://lore.kernel.org/r/20220829164952.2672848-1-dianders@chromium.org
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2022-08-29 16:52 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-25 16:41 [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Douglas Anderson
2022-08-25 16:41 ` [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Douglas Anderson
2022-08-25 21:30 ` Andrew Halaney
2022-08-25 21:58 ` Doug Anderson
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 2/7] arm64: dts: qcom: sa8295p-adp: " Douglas Anderson
2022-08-25 21:33 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 3/7] arm64: dts: qcom: sc8280xp-crd: " Douglas Anderson
2022-08-25 21:35 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp-thinkpad-x13s: " Douglas Anderson
2022-08-25 21:37 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 5/7] arm64: dts: qcom: sm8150-xperia-kumano: " Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:40 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 6/7] arm64: dts: qcom: sm8250-xperia-edo: " Douglas Anderson
2022-08-25 21:39 ` Andrew Halaney
2022-08-26 18:41 ` Konrad Dybcio
2022-08-25 16:42 ` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: " Douglas Anderson
2022-08-25 21:41 ` Andrew Halaney
2022-08-26 4:56 ` Vinod Koul
2022-08-26 18:41 ` Konrad Dybcio
2022-08-26 7:02 ` [PATCH 0/7] arm64: dts: qcom: Fix broken regulator spec on RPMH boards Johan Hovold
2022-08-29 16:51 ` Doug Anderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.