* [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap
@ 2024-04-17 7:18 Philippe Mathieu-Daudé
2024-04-17 11:13 ` Thomas Bogendoerfer
2024-04-17 17:27 ` Yury Norov
0 siblings, 2 replies; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2024-04-17 7:18 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Bogendoerfer, linux-mips, Philippe Mathieu-Daudé, Yury Norov
Do not open-code bitmap_set(). Besides, <linux/bitmap.h> API
allows architecture specific optimizations, so prefer it.
Use the HEART_NUM_IRQS definition to express the end of the
HEART bitmap.
Inspired-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
arch/mips/sgi-ip30/ip30-irq.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
index 423c32cb66ed..bdafff076191 100644
--- a/arch/mips/sgi-ip30/ip30-irq.c
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -264,7 +264,6 @@ void __init arch_init_irq(void)
struct irq_domain *domain;
struct fwnode_handle *fn;
unsigned long *mask;
- int i;
mips_cpu_irq_init();
@@ -300,8 +299,7 @@ void __init arch_init_irq(void)
set_bit(HEART_L3_INT_TIMER, heart_irq_map);
/* Reserve the error interrupts (#51 to #63). */
- for (i = HEART_L4_INT_XWID_ERR_9; i <= HEART_L4_INT_HEART_EXCP; i++)
- set_bit(i, heart_irq_map);
+ bitmap_set(heart_irq_map, HEART_L4_INT_XWID_ERR_9, HEART_NUM_IRQS);
fn = irq_domain_alloc_named_fwnode("HEART");
WARN_ON(fn == NULL);
--
2.41.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap
2024-04-17 7:18 [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap Philippe Mathieu-Daudé
@ 2024-04-17 11:13 ` Thomas Bogendoerfer
2024-04-17 17:27 ` Yury Norov
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Bogendoerfer @ 2024-04-17 11:13 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: linux-kernel, linux-mips, Yury Norov
On Wed, Apr 17, 2024 at 09:18:29AM +0200, Philippe Mathieu-Daudé wrote:
> Do not open-code bitmap_set(). Besides, <linux/bitmap.h> API
> allows architecture specific optimizations, so prefer it.
>
> Use the HEART_NUM_IRQS definition to express the end of the
> HEART bitmap.
please use HEART_L4_INT_HEART_EXCP + 1, like what the code did before.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap
2024-04-17 7:18 [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap Philippe Mathieu-Daudé
2024-04-17 11:13 ` Thomas Bogendoerfer
@ 2024-04-17 17:27 ` Yury Norov
2024-04-18 13:37 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 4+ messages in thread
From: Yury Norov @ 2024-04-17 17:27 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: linux-kernel, Thomas Bogendoerfer, linux-mips
On Wed, Apr 17, 2024 at 09:18:29AM +0200, Philippe Mathieu-Daudé wrote:
> Do not open-code bitmap_set(). Besides, <linux/bitmap.h> API
> allows architecture specific optimizations, so prefer it.
>
> Use the HEART_NUM_IRQS definition to express the end of the
> HEART bitmap.
>
> Inspired-by: Yury Norov <yury.norov@gmail.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> arch/mips/sgi-ip30/ip30-irq.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
> index 423c32cb66ed..bdafff076191 100644
> --- a/arch/mips/sgi-ip30/ip30-irq.c
> +++ b/arch/mips/sgi-ip30/ip30-irq.c
> @@ -264,7 +264,6 @@ void __init arch_init_irq(void)
> struct irq_domain *domain;
> struct fwnode_handle *fn;
> unsigned long *mask;
> - int i;
>
> mips_cpu_irq_init();
>
> @@ -300,8 +299,7 @@ void __init arch_init_irq(void)
> set_bit(HEART_L3_INT_TIMER, heart_irq_map);
>
> /* Reserve the error interrupts (#51 to #63). */
> - for (i = HEART_L4_INT_XWID_ERR_9; i <= HEART_L4_INT_HEART_EXCP; i++)
> - set_bit(i, heart_irq_map);
> + bitmap_set(heart_irq_map, HEART_L4_INT_XWID_ERR_9, HEART_NUM_IRQS);
This function has a signature
bitmap_set(map, start, length)
So this should be a:
bitmap_set(heart_irq_map, HEART_L4_INT_XWID_ERR_9,
HEART_NUM_IRQS - HEART_L4_INT_XWID_ERR_9 + 1)
Also on the above group of set_bit(). It should be 2 bitmap_set()
calls to me. HEART_L0_INT [0, 2] is the first one, and HEART_L2_INT
to HEART_L4_INT [46, 63] is the other. Isn't?
Thanks,
Yury
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap
2024-04-17 17:27 ` Yury Norov
@ 2024-04-18 13:37 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2024-04-18 13:37 UTC (permalink / raw)
To: Yury Norov; +Cc: linux-kernel, Thomas Bogendoerfer, linux-mips
On 17/4/24 19:27, Yury Norov wrote:
> On Wed, Apr 17, 2024 at 09:18:29AM +0200, Philippe Mathieu-Daudé wrote:
>> Do not open-code bitmap_set(). Besides, <linux/bitmap.h> API
>> allows architecture specific optimizations, so prefer it.
>>
>> Use the HEART_NUM_IRQS definition to express the end of the
>> HEART bitmap.
>>
>> Inspired-by: Yury Norov <yury.norov@gmail.com>
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
>> ---
>> arch/mips/sgi-ip30/ip30-irq.c | 4 +---
>> 1 file changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
>> index 423c32cb66ed..bdafff076191 100644
>> --- a/arch/mips/sgi-ip30/ip30-irq.c
>> +++ b/arch/mips/sgi-ip30/ip30-irq.c
>> @@ -264,7 +264,6 @@ void __init arch_init_irq(void)
>> struct irq_domain *domain;
>> struct fwnode_handle *fn;
>> unsigned long *mask;
>> - int i;
>>
>> mips_cpu_irq_init();
>>
>> @@ -300,8 +299,7 @@ void __init arch_init_irq(void)
>> set_bit(HEART_L3_INT_TIMER, heart_irq_map);
>>
>> /* Reserve the error interrupts (#51 to #63). */
>> - for (i = HEART_L4_INT_XWID_ERR_9; i <= HEART_L4_INT_HEART_EXCP; i++)
>> - set_bit(i, heart_irq_map);
>> + bitmap_set(heart_irq_map, HEART_L4_INT_XWID_ERR_9, HEART_NUM_IRQS);
>
> This function has a signature
> bitmap_set(map, start, length)
Doh, I thought it was (map, from_inc, to_exc), my bad.
> So this should be a:
> bitmap_set(heart_irq_map, HEART_L4_INT_XWID_ERR_9,
> HEART_NUM_IRQS - HEART_L4_INT_XWID_ERR_9 + 1)
>
> Also on the above group of set_bit(). It should be 2 bitmap_set()
> calls to me. HEART_L0_INT [0, 2] is the first one, and HEART_L2_INT
> to HEART_L4_INT [46, 63] is the other. Isn't?
Please disregard this patch, sorry for the noise.
Regards,
Phil.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-04-18 13:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-17 7:18 [PATCH] MIPS: SGI-IP30: Use bitmap API when iterating over bitmap Philippe Mathieu-Daudé
2024-04-17 11:13 ` Thomas Bogendoerfer
2024-04-17 17:27 ` Yury Norov
2024-04-18 13:37 ` Philippe Mathieu-Daudé
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.