* [PATCH v3] xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze
@ 2021-12-02 19:56 Ovidiu Panait
2021-12-03 12:47 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Ovidiu Panait @ 2021-12-02 19:56 UTC (permalink / raw)
To: u-boot; +Cc: monstr, Ovidiu Panait, Masahiro Yamada
The xilinx board_fdt_blob_setup() implementation makes use of
XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for
microblaze. Add one so that microblaze could also work with
CONFIG_OF_SEPARATE.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
---
board/xilinx/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
index 64507b5d84..1788066173 100644
--- a/board/xilinx/Kconfig
+++ b/board/xilinx/Kconfig
@@ -43,6 +43,7 @@ endif
config XILINX_OF_BOARD_DTB_ADDR
hex "Default DTB pickup address"
default 0x1000 if ARCH_VERSAL
+ default 0x8000 if MICROBLAZE
default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
depends on OF_BOARD || OF_SEPARATE
help
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze
2021-12-02 19:56 [PATCH v3] xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze Ovidiu Panait
@ 2021-12-03 12:47 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2021-12-03 12:47 UTC (permalink / raw)
To: Ovidiu Panait, u-boot; +Cc: Masahiro Yamada
On 12/2/21 20:56, Ovidiu Panait wrote:
> The xilinx board_fdt_blob_setup() implementation makes use of
> XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for
> microblaze. Add one so that microblaze could also work with
> CONFIG_OF_SEPARATE.
>
> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
> ---
>
> board/xilinx/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
> index 64507b5d84..1788066173 100644
> --- a/board/xilinx/Kconfig
> +++ b/board/xilinx/Kconfig
> @@ -43,6 +43,7 @@ endif
> config XILINX_OF_BOARD_DTB_ADDR
> hex "Default DTB pickup address"
> default 0x1000 if ARCH_VERSAL
> + default 0x8000 if MICROBLAZE
> default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
> depends on OF_BOARD || OF_SEPARATE
> help
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-03 12:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-02 19:56 [PATCH v3] xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze Ovidiu Panait
2021-12-03 12:47 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.