* [PATCH 06/10] zfcp: introduce SysFS interface for diagnostics of local SFP transceiver
@ 2019-04-09 16:50 Benjamin Block
0 siblings, 0 replies; only message in thread
From: Benjamin Block @ 2019-04-09 16:50 UTC (permalink / raw)
To: linux-s390, linux-scsi
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 11817 bytes --]
This adds an interface to read the diagnostics of the local SFP
transceiver of an FCP-Channel from userspace. This comes in the form of
new SysFS entries that are attached to the CCW device representing the
FCP device. Each type of data gets its own SysFS entry; the whole
collection of entries is pooled into a new child-directory of the CCW
device node: "diagnostics".
Adds SysFS entries for:
* sfp_invalid: boolean value evaluating to whether the following 5
fields are invalid; {0, 1}; 1 - invalid
* temperature: transceiver temp.; unit 1/256��C;
range [-128��C, +128��C]
* vcc: supply voltage; unit 100��V; range [0, 6.55V]
* tx_bias: transmitter laser bias current; unit 2��A;
range [0, 131mA]
* tx_power: coupled TX output power; unit 0.1��W; range [0, 6.5mW]
* rx_power: received optical power; unit 0.1��W; range [0, 6.5mW]
* optical_port: boolean value evaluating to whether the FCP-Channel has
an optical port; {0, 1}; 1 - optical
* fec_active: boolean value evaluating to whether 16G FEC is active;
{0, 1}; 1 - active
* port_tx_type: nibble describing the port type; {0, 1, 2, 3};
0 - unknown, 1 - short wave,
2 - long wave LC 1310nm, 3 - long wave LL 1550nm
* connector_type: two bits describing the connector type; {0, 1};
0 - unknown, 1 - SFP+
This is only supported if the FCP-Channel in turn supports reporting the
SFP Diagnostic Data, otherwise read() on these new entries will return
EOPNOTSUPP (this affects only adapters older than FICON Express8S, on
Mainframe generations older than z14). Other possible errors for read()
include ENOLINK, ENODEV and ENOMEM.
With this patch the userspace-interface will only read data stored in
the corresponding "diagnostic buffer" (that was stored during completion
of an previous Exchange Port Data command). Implicit updating will
follow later in this series.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
---
drivers/s390/scsi/zfcp_aux.c | 4 +++
drivers/s390/scsi/zfcp_diag.c | 42 +++++++++++++++++++++++++
drivers/s390/scsi/zfcp_diag.h | 18 +++++++++++
drivers/s390/scsi/zfcp_ext.h | 1 +
drivers/s390/scsi/zfcp_sysfs.c | 71 ++++++++++++++++++++++++++++++++++++++++++
5 files changed, 136 insertions(+)
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 3ddc7147ac4f..5ea162999c4a 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -407,6 +407,9 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
&zfcp_sysfs_adapter_attrs))
goto failed;
+ if (zfcp_diag_sysfs_setup(adapter))
+ goto failed;
+
/* report size limit per scatter-gather segment */
adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
@@ -431,6 +434,7 @@ void zfcp_adapter_unregister(struct zfcp_adapter *adapter)
zfcp_fc_wka_ports_force_offline(adapter->gs);
zfcp_scsi_adapter_unregister(adapter);
+ zfcp_diag_sysfs_destroy(adapter);
sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs);
zfcp_erp_thread_kill(adapter);
diff --git a/drivers/s390/scsi/zfcp_diag.c b/drivers/s390/scsi/zfcp_diag.c
index a9564c9156eb..65475d8fcef1 100644
--- a/drivers/s390/scsi/zfcp_diag.c
+++ b/drivers/s390/scsi/zfcp_diag.c
@@ -10,6 +10,8 @@
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/string.h>
+#include <linux/kernfs.h>
+#include <linux/sysfs.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -77,6 +79,46 @@ void zfcp_diag_adapter_free(struct zfcp_adapter *const adapter)
adapter->diagnostics = NULL;
}
+/**
+ * zfcp_diag_sysfs_setup() - Setup the sysfs-group for adapter-diagnostics.
+ * @adapter: target adapter to which the group should be added.
+ *
+ * Return: 0 on success; Something else otherwise (see sysfs_create_group()).
+ */
+int zfcp_diag_sysfs_setup(struct zfcp_adapter *const adapter)
+{
+ int rc = sysfs_create_group(&adapter->ccw_device->dev.kobj,
+ &zfcp_sysfs_diag_attr_group);
+ if (rc == 0)
+ adapter->diagnostics->sysfs_established = 1;
+
+ return rc;
+}
+
+/**
+ * zfcp_diag_sysfs_destroy() - Remove the sysfs-group for adapter-diagnostics.
+ * @adapter: target adapter from which the group should be removed.
+ */
+void zfcp_diag_sysfs_destroy(struct zfcp_adapter *const adapter)
+{
+ if (adapter->diagnostics == NULL ||
+ !adapter->diagnostics->sysfs_established)
+ return;
+
+ /*
+ * We need this state-handling so we can prevent warnings being printed
+ * on the kernel-console in case we have to abort a halfway done
+ * zfcp_adapter_enqueue(), in which the sysfs-group was not yet
+ * established. sysfs_remove_group() does this checking as well, but
+ * still prints a warning in case we try to remove a group that has not
+ * been established before
+ */
+ adapter->diagnostics->sysfs_established = 0;
+ sysfs_remove_group(&adapter->ccw_device->dev.kobj,
+ &zfcp_sysfs_diag_attr_group);
+}
+
+
/**
* zfcp_diag_update_xdata() - Update a diagnostics buffer.
* @hdr: the meta data to update.
diff --git a/drivers/s390/scsi/zfcp_diag.h b/drivers/s390/scsi/zfcp_diag.h
index 031050c82b6e..7c7e0a726c7e 100644
--- a/drivers/s390/scsi/zfcp_diag.h
+++ b/drivers/s390/scsi/zfcp_diag.h
@@ -40,6 +40,8 @@ struct zfcp_diag_header {
/**
* struct zfcp_diag_adapter - central storage for all diagnostics concerning an
* adapter.
+ * @sysfs_established: flag showing that the associated sysfs-group was created
+ * during run of zfcp_adapter_enqueue().
* @port_data: data retrieved using exchange port data.
* @port_data.header: header with metadata for the cache in @port_data.data.
* @port_data.data: cached QTCB Bottom of command exchange port data.
@@ -48,6 +50,8 @@ struct zfcp_diag_header {
* @config_data.data: cached QTCB Bottom of command exchange config data.
*/
struct zfcp_diag_adapter {
+ u64 sysfs_established :1;
+
struct {
struct zfcp_diag_header header;
struct fsf_qtcb_bottom_port data;
@@ -61,7 +65,21 @@ struct zfcp_diag_adapter {
int zfcp_diag_adapter_setup(struct zfcp_adapter *const adapter);
void zfcp_diag_adapter_free(struct zfcp_adapter *const adapter);
+int zfcp_diag_sysfs_setup(struct zfcp_adapter *const adapter);
+void zfcp_diag_sysfs_destroy(struct zfcp_adapter *const adapter);
+
void zfcp_diag_update_xdata(struct zfcp_diag_header *const hdr,
const void *const data, const bool incomplete);
+/**
+ * zfcp_diag_support_sfp() - Return %true if the @adapter supports reporting
+ * SFP Data.
+ * @adapter: adapter to test the availability of SFP Data reporting for.
+ */
+static inline bool
+zfcp_diag_support_sfp(const struct zfcp_adapter *const adapter)
+{
+ return !!(adapter->adapter_features & FSF_FEATURE_REPORT_SFP_DATA);
+}
+
#endif /* ZFCP_DIAG_H */
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 3fce47b0b21b..b4f9d5fa5ab1 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -165,6 +165,7 @@ extern const struct attribute_group *zfcp_port_attr_groups[];
extern struct mutex zfcp_sysfs_port_units_mutex;
extern struct device_attribute *zfcp_sysfs_sdev_attrs[];
extern struct device_attribute *zfcp_sysfs_shost_attrs[];
+extern const struct attribute_group zfcp_sysfs_diag_attr_group;
/* zfcp_unit.c */
extern int zfcp_unit_add(struct zfcp_port *, u64);
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 11c945e8156d..5323e34d94bb 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -11,6 +11,7 @@
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/slab.h>
+#include "zfcp_diag.h"
#include "zfcp_ext.h"
#define ZFCP_DEV_ATTR(_feat, _name, _mode, _show, _store) \
@@ -621,3 +622,73 @@ struct device_attribute *zfcp_sysfs_shost_attrs[] = {
&dev_attr_queue_full,
NULL
};
+
+#define ZFCP_DEFINE_DIAG_SFP_ATTR(_name, _qtcb_member, _prtsize, _prtfmt) \
+ static ssize_t zfcp_sysfs_adapter_diag_sfp_##_name##_show( \
+ struct device *dev, struct device_attribute *attr, char *buf) \
+ { \
+ struct zfcp_adapter *const adapter = \
+ zfcp_ccw_adapter_by_cdev(to_ccwdev(dev)); \
+ struct zfcp_diag_header *diag_hdr; \
+ ssize_t rc = -ENOLINK; \
+ unsigned long flags; \
+ unsigned int status; \
+ \
+ if (!adapter) \
+ return -ENODEV; \
+ \
+ status = atomic_read(&adapter->status); \
+ if (0 == (status & ZFCP_STATUS_COMMON_OPEN) || \
+ 0 == (status & ZFCP_STATUS_COMMON_UNBLOCKED) || \
+ 0 != (status & ZFCP_STATUS_COMMON_ERP_FAILED)) \
+ goto out; \
+ \
+ if (!zfcp_diag_support_sfp(adapter)) { \
+ rc = -EOPNOTSUPP; \
+ goto out; \
+ } \
+ \
+ diag_hdr = &adapter->diagnostics->port_data.header; \
+ \
+ spin_lock_irqsave(&diag_hdr->access_lock, flags); \
+ rc = scnprintf( \
+ buf, (_prtsize) + 2, _prtfmt "\n", \
+ adapter->diagnostics->port_data.data._qtcb_member); \
+ spin_unlock_irqrestore(&diag_hdr->access_lock, flags); \
+ \
+ out: \
+ zfcp_ccw_adapter_put(adapter); \
+ return rc; \
+ } \
+ static ZFCP_DEV_ATTR(adapter_diag_sfp, _name, 0400, \
+ zfcp_sysfs_adapter_diag_sfp_##_name##_show, NULL)
+
+ZFCP_DEFINE_DIAG_SFP_ATTR(temperature, temperature, 5, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(vcc, vcc, 5, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(tx_bias, tx_bias, 5, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(tx_power, tx_power, 5, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(rx_power, rx_power, 5, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(port_tx_type, sfp_flags.port_tx_type, 2, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(optical_port, sfp_flags.optical_port, 1, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(sfp_invalid, sfp_flags.sfp_invalid, 1, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(connector_type, sfp_flags.connector_type, 1, "%hu");
+ZFCP_DEFINE_DIAG_SFP_ATTR(fec_active, sfp_flags.fec_active, 1, "%hu");
+
+static struct attribute *zfcp_sysfs_diag_attrs[] = {
+ &dev_attr_adapter_diag_sfp_temperature.attr,
+ &dev_attr_adapter_diag_sfp_vcc.attr,
+ &dev_attr_adapter_diag_sfp_tx_bias.attr,
+ &dev_attr_adapter_diag_sfp_tx_power.attr,
+ &dev_attr_adapter_diag_sfp_rx_power.attr,
+ &dev_attr_adapter_diag_sfp_port_tx_type.attr,
+ &dev_attr_adapter_diag_sfp_optical_port.attr,
+ &dev_attr_adapter_diag_sfp_sfp_invalid.attr,
+ &dev_attr_adapter_diag_sfp_connector_type.attr,
+ &dev_attr_adapter_diag_sfp_fec_active.attr,
+ NULL,
+};
+
+const struct attribute_group zfcp_sysfs_diag_attr_group = {
+ .name = "diagnostics",
+ .attrs = zfcp_sysfs_diag_attrs,
+};
--
2.16.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-04-09 16:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-09 16:50 [PATCH 06/10] zfcp: introduce SysFS interface for diagnostics of local SFP transceiver Benjamin Block
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.