* [PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
@ 2023-09-21 17:06 ` Durai Manickam KR
2023-09-21 17:06 ` [PATCH 2/4] configs: at91: sam9x60_curiosity: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
` (3 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Durai Manickam KR @ 2023-09-21 17:06 UTC (permalink / raw)
To: u-boot
Cc: durai.manickamkr, hari.prasathge, varshini.rajendran,
cristian.birsan, nicolas.ferre, balamanikandan.gunasundar
- Enable Device model supported NAND driver configs in SDMMC defconfig.
- Enable SYSRESET for Atmel/Microchip's platforms.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
configs/sam9x60_curiosity_mmc_defconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
index 10937d67d7..279c4c1f4b 100644
--- a/configs/sam9x60_curiosity_mmc_defconfig
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -38,6 +38,8 @@ CONFIG_CMD_DM=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
@@ -50,6 +52,9 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_CLK_CCF=y
CONFIG_CLK_AT91=y
@@ -60,10 +65,17 @@ CONFIG_CPU=y
CONFIG_AT91_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
CONFIG_I2C_EEPROM=y
CONFIG_MICROCHIP_FLEXCOM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_DM_NAND_ATMEL=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_PHY_MICREL=y
CONFIG_MACB=y
CONFIG_PINCTRL=y
@@ -71,6 +83,8 @@ CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
CONFIG_TIMER=y
CONFIG_MCHP_PIT64B_TIMER=y
CONFIG_W1=y
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/4] configs: at91: sam9x60_curiosity: Add sam9x60_curiosity_nandflash_defconfig
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
2023-09-21 17:06 ` [PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig Durai Manickam KR
@ 2023-09-21 17:06 ` Durai Manickam KR
2023-09-21 17:06 ` [PATCH 3/4] ARM: dts: at91: sam9x60_curiosity: Enable NAND support Durai Manickam KR
` (2 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Durai Manickam KR @ 2023-09-21 17:06 UTC (permalink / raw)
To: u-boot
Cc: durai.manickamkr, hari.prasathge, varshini.rajendran,
cristian.birsan, nicolas.ferre, balamanikandan.gunasundar
Add boot from NAND flash support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_nandflash_defconfig | 92 +++++++++++++++++++
2 files changed, 93 insertions(+)
create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 0d9369e027..992d3f4024 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -6,3 +6,4 @@ F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
F: configs/sam9x60_curiosity_mmc_defconfig
F: configs/sam9x60_curiosity_mmc1_defconfig
+F: configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/configs/sam9x60_curiosity_nandflash_defconfig b/configs/sam9x60_curiosity_nandflash_defconfig
new file mode 100644
index 0000000000..4146bf0ac9
--- /dev/null
+++ b/configs/sam9x60_curiosity_nandflash_defconfig
@@ -0,0 +1,92 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00
+CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_DM_NAND_ATMEL=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_PHY_MICREL=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/4] ARM: dts: at91: sam9x60_curiosity: Enable NAND support
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
2023-09-21 17:06 ` [PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig Durai Manickam KR
2023-09-21 17:06 ` [PATCH 2/4] configs: at91: sam9x60_curiosity: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
@ 2023-09-21 17:06 ` Durai Manickam KR
2023-09-21 17:06 ` [PATCH 4/4] ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible Durai Manickam KR
2023-09-22 7:00 ` [PATCH 0/4] Add support for sam9x60 curiosity Alexander Dahl
4 siblings, 0 replies; 12+ messages in thread
From: Durai Manickam KR @ 2023-09-21 17:06 UTC (permalink / raw)
To: u-boot
Cc: durai.manickamkr, hari.prasathge, varshini.rajendran,
cristian.birsan, nicolas.ferre, balamanikandan.gunasundar
Enable the EBI and NAND flash controller. Define the pinctrl and
partition table.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/dts/at91-sam9x60_curiosity.dts | 104 ++++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
index d6ae3d648d..0d09679bd3 100644
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -39,6 +39,44 @@
};
pinctrl {
+ ebi {
+ pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_ebi_addr_nand: ebi-addr-0 {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ nand {
+ pinctrl_nand_oe_we: nand-oe-we-0 {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand_cs: nand-cs-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
pinctrl_flx0: flx0_default {
atmel,pins =
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
@@ -92,6 +130,72 @@
};
};
+&ebi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+ status = "okay";
+
+ nand_controller: nand-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ atmel,rb = <0>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0xc0000>;
+ };
+
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
+ label = "U-Boot Env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+ };
+};
+
&macb0 {
phy-mode = "rmii";
status = "okay";
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/4] ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
` (2 preceding siblings ...)
2023-09-21 17:06 ` [PATCH 3/4] ARM: dts: at91: sam9x60_curiosity: Enable NAND support Durai Manickam KR
@ 2023-09-21 17:06 ` Durai Manickam KR
2023-09-22 7:00 ` [PATCH 0/4] Add support for sam9x60 curiosity Alexander Dahl
4 siblings, 0 replies; 12+ messages in thread
From: Durai Manickam KR @ 2023-09-21 17:06 UTC (permalink / raw)
To: u-boot
Cc: durai.manickamkr, hari.prasathge, varshini.rajendran,
cristian.birsan, nicolas.ferre, balamanikandan.gunasundar
The EEPROM memory on this board is microchip 24aa025e48 which is compatible with
at24c02 with a page size of 16. Fix the compatible accordingly.
Fixes: a79714f268 ("ARM: dts: Add device tree files for sam9x60_curiosity")
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/dts/at91-sam9x60_curiosity.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
index 0d09679bd3..b06e0d9046 100644
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -31,7 +31,7 @@
status = "okay";
eeprom@53 {
- compatible = "atmel,24c32";
+ compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 0/4] Add support for sam9x60 curiosity
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
` (3 preceding siblings ...)
2023-09-21 17:06 ` [PATCH 4/4] ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible Durai Manickam KR
@ 2023-09-22 7:00 ` Alexander Dahl
2023-09-22 15:50 ` Tom Rini
2023-09-26 6:13 ` Durai.ManickamKR
4 siblings, 2 replies; 12+ messages in thread
From: Alexander Dahl @ 2023-09-22 7:00 UTC (permalink / raw)
To: Durai Manickam KR
Cc: u-boot, hari.prasathge, varshini.rajendran, cristian.birsan,
nicolas.ferre, balamanikandan.gunasundar, Eugen Hristev
Hello Durai,
Am Thu, Sep 21, 2023 at 10:36:27PM +0530 schrieb Durai Manickam KR:
> This patch series adds boot from NAND support, configs update and
> fixes. The changes has been done on top of u-boot version 2023.07.
Well, interesting. I sent patches for NAND flash support on that very
board some weeks ago which were already applied to the at91 custodian
tree:
https://source.denx.de/u-boot/custodians/u-boot-at91/-/tree/next?ref_type=heads
Tom already merged that to the mainline next branch. I suggest you
rebase on next.
Add Eugen to Cc, since he still is officially listed as maintainer of
the at91 stuff.
Greets
Alex
>
> Durai Manickam KR (4):
> configs: at91: sam9x60_curiosity: update
> sam9x60_curiosity_mmc_defconfig
> configs: at91: sam9x60_curiosity: Add
> sam9x60_curiosity_nandflash_defconfig
> ARM: dts: at91: sam9x60_curiosity: Enable NAND support
> ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible
>
> arch/arm/dts/at91-sam9x60_curiosity.dts | 106 +++++++++++++++++-
> board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
> configs/sam9x60_curiosity_mmc_defconfig | 14 +++
> configs/sam9x60_curiosity_nandflash_defconfig | 92 +++++++++++++++
> 4 files changed, 212 insertions(+), 1 deletion(-)
> create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
>
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/4] Add support for sam9x60 curiosity
2023-09-22 7:00 ` [PATCH 0/4] Add support for sam9x60 curiosity Alexander Dahl
@ 2023-09-22 15:50 ` Tom Rini
2023-09-26 6:13 ` Durai.ManickamKR
1 sibling, 0 replies; 12+ messages in thread
From: Tom Rini @ 2023-09-22 15:50 UTC (permalink / raw)
To: Durai Manickam KR, u-boot, hari.prasathge, varshini.rajendran,
cristian.birsan, nicolas.ferre, balamanikandan.gunasundar,
Eugen Hristev
[-- Attachment #1: Type: text/plain, Size: 868 bytes --]
On Fri, Sep 22, 2023 at 09:00:38AM +0200, Alexander Dahl wrote:
> Hello Durai,
>
> Am Thu, Sep 21, 2023 at 10:36:27PM +0530 schrieb Durai Manickam KR:
> > This patch series adds boot from NAND support, configs update and
> > fixes. The changes has been done on top of u-boot version 2023.07.
>
> Well, interesting. I sent patches for NAND flash support on that very
> board some weeks ago which were already applied to the at91 custodian
> tree:
>
> https://source.denx.de/u-boot/custodians/u-boot-at91/-/tree/next?ref_type=heads
>
> Tom already merged that to the mainline next branch. I suggest you
> rebase on next.
>
> Add Eugen to Cc, since he still is officially listed as maintainer of
> the at91 stuff.
And please make sure that the DTS changes are syncing back from the
kernel and note what release they are part of.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/4] Add support for sam9x60 curiosity
2023-09-22 7:00 ` [PATCH 0/4] Add support for sam9x60 curiosity Alexander Dahl
2023-09-22 15:50 ` Tom Rini
@ 2023-09-26 6:13 ` Durai.ManickamKR
2023-10-25 8:28 ` Eugen Hristev
1 sibling, 1 reply; 12+ messages in thread
From: Durai.ManickamKR @ 2023-09-26 6:13 UTC (permalink / raw)
To: u-boot, Hari.PrasathGE, Varshini.Rajendran, Cristian.Birsan,
Nicolas.Ferre, Balamanikandan.Gunasundar, eugen.hristev
On 22/09/23 12:30, Alexander Dahl wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hello Durai,
>
> Am Thu, Sep 21, 2023 at 10:36:27PM +0530 schrieb Durai Manickam KR:
>> This patch series adds boot from NAND support, configs update and
>> fixes. The changes has been done on top of u-boot version 2023.07.
> Well, interesting. I sent patches for NAND flash support on that very
> board some weeks ago which were already applied to the at91 custodian
> tree:
>
> https://source.denx.de/u-boot/custodians/u-boot-at91/-/tree/next?ref_type=heads
>
> Tom already merged that to the mainline next branch. I suggest you
> rebase on next.
Hi Alexander,
Well, it is present in custodians next branch. Only thing which is
missed is the NAND defconfig support [PATCH 2/4]. Will send only this
patch shortly.
> Add Eugen to Cc, since he still is officially listed as maintainer of
> the at91 stuff.
>
> Greets
> Alex
>
>> Durai Manickam KR (4):
>> configs: at91: sam9x60_curiosity: update
>> sam9x60_curiosity_mmc_defconfig
>> configs: at91: sam9x60_curiosity: Add
>> sam9x60_curiosity_nandflash_defconfig
>> ARM: dts: at91: sam9x60_curiosity: Enable NAND support
>> ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible
>>
>> arch/arm/dts/at91-sam9x60_curiosity.dts | 106 +++++++++++++++++-
>> board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
>> configs/sam9x60_curiosity_mmc_defconfig | 14 +++
>> configs/sam9x60_curiosity_nandflash_defconfig | 92 +++++++++++++++
>> 4 files changed, 212 insertions(+), 1 deletion(-)
>> create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
>>
>> --
>> 2.25.1
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/4] Add support for sam9x60 curiosity
2023-09-26 6:13 ` Durai.ManickamKR
@ 2023-10-25 8:28 ` Eugen Hristev
0 siblings, 0 replies; 12+ messages in thread
From: Eugen Hristev @ 2023-10-25 8:28 UTC (permalink / raw)
To: Durai.ManickamKR, u-boot, Hari.PrasathGE, Varshini.Rajendran,
Cristian.Birsan, Nicolas.Ferre, Balamanikandan.Gunasundar
On 9/26/23 09:13, Durai.ManickamKR@microchip.com wrote:
>
> On 22/09/23 12:30, Alexander Dahl wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> Hello Durai,
>>
>> Am Thu, Sep 21, 2023 at 10:36:27PM +0530 schrieb Durai Manickam KR:
>>> This patch series adds boot from NAND support, configs update and
>>> fixes. The changes has been done on top of u-boot version 2023.07.
>> Well, interesting. I sent patches for NAND flash support on that very
>> board some weeks ago which were already applied to the at91 custodian
>> tree:
>>
>> https://source.denx.de/u-boot/custodians/u-boot-at91/-/tree/next?ref_type=heads
>>
>> Tom already merged that to the mainline next branch. I suggest you
>> rebase on next.
>
> Hi Alexander,
>
> Well, it is present in custodians next branch. Only thing which is
> missed is the NAND defconfig support [PATCH 2/4]. Will send only this
> patch shortly.
Hello Durai,
Before you resend, check your config please, as in the CI loop it does
not build as-is:
+arm-linux-gnueabi-ld.bfd: drivers/clk/at91/sam9x60.o: in function
`sam9x60_clk_probe':
+drivers/clk/at91/sam9x60.c:595:(.text.sam9x60_clk_probe+0x500):
undefined reference to `sam9x60_clk_register_usb'
+make[1]: *** [Makefile:1765: u-boot] Error 1
+make: *** [Makefile:177: sub-make] Error 2
Eugen
>
>> Add Eugen to Cc, since he still is officially listed as maintainer of
>> the at91 stuff.
>>
>> Greets
>> Alex
>>
>>> Durai Manickam KR (4):
>>> configs: at91: sam9x60_curiosity: update
>>> sam9x60_curiosity_mmc_defconfig
>>> configs: at91: sam9x60_curiosity: Add
>>> sam9x60_curiosity_nandflash_defconfig
>>> ARM: dts: at91: sam9x60_curiosity: Enable NAND support
>>> ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible
>>>
>>> arch/arm/dts/at91-sam9x60_curiosity.dts | 106 +++++++++++++++++-
>>> board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
>>> configs/sam9x60_curiosity_mmc_defconfig | 14 +++
>>> configs/sam9x60_curiosity_nandflash_defconfig | 92 +++++++++++++++
>>> 4 files changed, 212 insertions(+), 1 deletion(-)
>>> create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
>>>
>>> --
>>> 2.25.1
>>>
^ permalink raw reply [flat|nested] 12+ messages in thread