* [PATCH] sunxi: board: Splitting CHIP defconfig for nand.
@ 2021-01-24 16:19 Alexandre GRIVEAUX
2021-02-19 18:00 ` André Przywara
0 siblings, 1 reply; 3+ messages in thread
From: Alexandre GRIVEAUX @ 2021-01-24 16:19 UTC (permalink / raw)
To: u-boot
This patch split CHIP defconfig to add nand 4G and 8G support.
Some CONFIG was put at the end of defconfig to ease comparison between:
- CHIP Pro
- CHIP with Toshiba 4G
- CHIP with Hynix 8G
Witch are essentialy the same board with differents nand and memory.
Values was taken from now defunct compagny script "chip-update-firmware.sh"
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
---
...CHIP_defconfig => CHIP_Hynix_8G_defconfig} | 21 +++++++++---
configs/CHIP_Toshiba_4G_defconfig | 32 +++++++++++++++++++
2 files changed, 49 insertions(+), 4 deletions(-)
rename configs/{CHIP_defconfig => CHIP_Hynix_8G_defconfig} (50%)
create mode 100644 configs/CHIP_Toshiba_4G_defconfig
diff --git a/configs/CHIP_defconfig b/configs/CHIP_Hynix_8G_defconfig
similarity index 50%
rename from configs/CHIP_defconfig
rename to configs/CHIP_Hynix_8G_defconfig
index a70ee31d40..4d04a2798e 100644
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_Hynix_8G_defconfig
@@ -4,16 +4,29 @@ CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_DFU_RAM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot-env"
# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x400000
+CONFIG_SYS_NAND_PAGE_SIZE=0x4000
+CONFIG_SYS_NAND_OOBSIZE=0x680
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_DFU_RAM=y
diff --git a/configs/CHIP_Toshiba_4G_defconfig b/configs/CHIP_Toshiba_4G_defconfig
new file mode 100644
index 0000000000..bbc6cd9744
--- /dev/null
+++ b/configs/CHIP_Toshiba_4G_defconfig
@@ -0,0 +1,32 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
+CONFIG_USB0_VBUS_PIN="PB10"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot-env"
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x400000
+CONFIG_SYS_NAND_PAGE_SIZE=0x4000
+CONFIG_SYS_NAND_OOBSIZE=0x500
+CONFIG_AXP_ALDO3_VOLT=3300
+CONFIG_AXP_ALDO4_VOLT=3300
+CONFIG_CONS_INDEX=2
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_DFU_RAM=y
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] sunxi: board: Splitting CHIP defconfig for nand.
2021-01-24 16:19 [PATCH] sunxi: board: Splitting CHIP defconfig for nand Alexandre GRIVEAUX
@ 2021-02-19 18:00 ` André Przywara
2021-02-22 9:44 ` Maxime Ripard
0 siblings, 1 reply; 3+ messages in thread
From: André Przywara @ 2021-02-19 18:00 UTC (permalink / raw)
To: u-boot
On 24/01/2021 16:19, Alexandre GRIVEAUX wrote:
Hi Alexandre,
(CCing: Kory, plus using Maxime's and Boris' newer emails)
> This patch split CHIP defconfig to add nand 4G and 8G support.
>
> Some CONFIG was put at the end of defconfig to ease comparison between:
> - CHIP Pro
> - CHIP with Toshiba 4G
> - CHIP with Hynix 8G
>
> Witch are essentialy the same board with differents nand and memory.
>
> Values was taken from now defunct compagny script "chip-update-firmware.sh"
Mmh, I am puzzled how this is supposed to work? I thought that the NAND
in the non-Pro version was not supported (MLC?). So booting via USB was
the only option?
Has this changed?
Can someone confirm that this works?
Cheers,
Andre
> Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
> ---
> ...CHIP_defconfig => CHIP_Hynix_8G_defconfig} | 21 +++++++++---
> configs/CHIP_Toshiba_4G_defconfig | 32 +++++++++++++++++++
> 2 files changed, 49 insertions(+), 4 deletions(-)
> rename configs/{CHIP_defconfig => CHIP_Hynix_8G_defconfig} (50%)
> create mode 100644 configs/CHIP_Toshiba_4G_defconfig
>
> diff --git a/configs/CHIP_defconfig b/configs/CHIP_Hynix_8G_defconfig
> similarity index 50%
> rename from configs/CHIP_defconfig
> rename to configs/CHIP_Hynix_8G_defconfig
> index a70ee31d40..4d04a2798e 100644
> --- a/configs/CHIP_defconfig
> +++ b/configs/CHIP_Hynix_8G_defconfig
> @@ -4,16 +4,29 @@ CONFIG_SPL=y
> CONFIG_MACH_SUN5I=y
> CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
> CONFIG_USB0_VBUS_PIN="PB10"
> -CONFIG_VIDEO_COMPOSITE=y
> CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
> CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_CMD_DFU=y
> -CONFIG_CMD_USB_MASS_STORAGE=y
> -CONFIG_DFU_RAM=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
> +CONFIG_ENV_IS_IN_UBI=y
> +CONFIG_ENV_UBI_PART="UBI"
> +CONFIG_ENV_UBI_VOLUME="uboot-env"
> # CONFIG_MMC is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_SYS_NAND_BLOCK_SIZE=0x400000
> +CONFIG_SYS_NAND_PAGE_SIZE=0x4000
> +CONFIG_SYS_NAND_OOBSIZE=0x680
> CONFIG_AXP_ALDO3_VOLT=3300
> CONFIG_AXP_ALDO4_VOLT=3300
> CONFIG_CONS_INDEX=2
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_MUSB_GADGET=y
> +CONFIG_USB_FUNCTION_MASS_STORAGE=y
> +CONFIG_VIDEO_COMPOSITE=y
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_DFU_RAM=y
> diff --git a/configs/CHIP_Toshiba_4G_defconfig b/configs/CHIP_Toshiba_4G_defconfig
> new file mode 100644
> index 0000000000..bbc6cd9744
> --- /dev/null
> +++ b/configs/CHIP_Toshiba_4G_defconfig
> @@ -0,0 +1,32 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN5I=y
> +CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
> +CONFIG_USB0_VBUS_PIN="PB10"
> +CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
> +CONFIG_SPL_I2C_SUPPORT=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
> +CONFIG_ENV_IS_IN_UBI=y
> +CONFIG_ENV_UBI_PART="UBI"
> +CONFIG_ENV_UBI_VOLUME="uboot-env"
> +# CONFIG_MMC is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_SYS_NAND_BLOCK_SIZE=0x400000
> +CONFIG_SYS_NAND_PAGE_SIZE=0x4000
> +CONFIG_SYS_NAND_OOBSIZE=0x500
> +CONFIG_AXP_ALDO3_VOLT=3300
> +CONFIG_AXP_ALDO4_VOLT=3300
> +CONFIG_CONS_INDEX=2
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_MUSB_GADGET=y
> +CONFIG_USB_FUNCTION_MASS_STORAGE=y
> +CONFIG_VIDEO_COMPOSITE=y
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_DFU_RAM=y
>
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] sunxi: board: Splitting CHIP defconfig for nand.
2021-02-19 18:00 ` André Przywara
@ 2021-02-22 9:44 ` Maxime Ripard
0 siblings, 0 replies; 3+ messages in thread
From: Maxime Ripard @ 2021-02-22 9:44 UTC (permalink / raw)
To: u-boot
On Fri, Feb 19, 2021 at 06:00:13PM +0000, Andr? Przywara wrote:
> On 24/01/2021 16:19, Alexandre GRIVEAUX wrote:
>
> Hi Alexandre,
>
> (CCing: Kory, plus using Maxime's and Boris' newer emails)
>
> > This patch split CHIP defconfig to add nand 4G and 8G support.
> >
> > Some CONFIG was put at the end of defconfig to ease comparison between:
> > - CHIP Pro
> > - CHIP with Toshiba 4G
> > - CHIP with Hynix 8G
> >
> > Witch are essentialy the same board with differents nand and memory.
> >
> > Values was taken from now defunct compagny script "chip-update-firmware.sh"
>
> Mmh, I am puzzled how this is supposed to work? I thought that the NAND
> in the non-Pro version was not supported (MLC?). So booting via USB was
> the only option?
> Has this changed?
>
> Can someone confirm that this works?
The CHIP-Pro is indeed different, it's using a different SoC and NAND
(SLC) chip.
All the variants of the CHIP use an MLC NAND that isn't supported at all
by U-Boot.
I would discourage you from merging any MLC NAND related patch until
some form of MLC support is merged into U-Boot.
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210222/06156843/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-22 9:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-24 16:19 [PATCH] sunxi: board: Splitting CHIP defconfig for nand Alexandre GRIVEAUX
2021-02-19 18:00 ` André Przywara
2021-02-22 9:44 ` Maxime Ripard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.