* [PATCH] memory: omap-gpmc: Fix debug output for access width
@ 2017-05-05 22:37 ` Tony Lindgren
0 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2017-05-05 22:37 UTC (permalink / raw)
To: linux-omap; +Cc: linux-arm-kernel, Roger Quadros
The width needs to be configured in bytes with 1 meaning 8-bit
access and 2 meaning 16-bit access.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/memory/omap-gpmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
pr_info("gpmc cs%i access configuration:\n", cs);
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
- GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
+ GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
--
2.12.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] memory: omap-gpmc: Fix debug output for access width
@ 2017-05-05 22:37 ` Tony Lindgren
0 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2017-05-05 22:37 UTC (permalink / raw)
To: linux-arm-kernel
The width needs to be configured in bytes with 1 meaning 8-bit
access and 2 meaning 16-bit access.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/memory/omap-gpmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
pr_info("gpmc cs%i access configuration:\n", cs);
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
- GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
+ GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
--
2.12.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
2017-05-05 22:37 ` Tony Lindgren
@ 2017-05-08 10:40 ` Roger Quadros
-1 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2017-05-08 10:40 UTC (permalink / raw)
To: Tony Lindgren, linux-omap; +Cc: linux-arm-kernel
Hi Tony,
On 06/05/17 01:37, Tony Lindgren wrote:
> The width needs to be configured in bytes with 1 meaning 8-bit
> access and 2 meaning 16-bit access.
As per the TRM, for GPMC_CONFIG1.DEVICESIZE
0 means 8-bit
1 means 16-bit
>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> drivers/memory/omap-gpmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> pr_info("gpmc cs%i access configuration:\n", cs);
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
setting shift 1 means the value will be multiplied by 2
so this will read 0 for 8-bit and 2 for 16-bit.
Is this what we want?
I'd still prefer the old way of showing RAW values than interpreted ones.
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] memory: omap-gpmc: Fix debug output for access width
@ 2017-05-08 10:40 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2017-05-08 10:40 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
On 06/05/17 01:37, Tony Lindgren wrote:
> The width needs to be configured in bytes with 1 meaning 8-bit
> access and 2 meaning 16-bit access.
As per the TRM, for GPMC_CONFIG1.DEVICESIZE
0 means 8-bit
1 means 16-bit
>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> drivers/memory/omap-gpmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> pr_info("gpmc cs%i access configuration:\n", cs);
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
setting shift 1 means the value will be multiplied by 2
so this will read 0 for 8-bit and 2 for 16-bit.
Is this what we want?
I'd still prefer the old way of showing RAW values than interpreted ones.
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
2017-05-08 10:40 ` Roger Quadros
@ 2017-05-08 17:36 ` Tony Lindgren
-1 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2017-05-08 17:36 UTC (permalink / raw)
To: Roger Quadros; +Cc: linux-omap, linux-arm-kernel
* Roger Quadros <rogerq@ti.com> [170508 03:44]:
> Hi Tony,
>
> On 06/05/17 01:37, Tony Lindgren wrote:
> > The width needs to be configured in bytes with 1 meaning 8-bit
> > access and 2 meaning 16-bit access.
>
> As per the TRM, for GPMC_CONFIG1.DEVICESIZE
> 0 means 8-bit
> 1 means 16-bit
>
> >
> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> > Cc: Roger Quadros <rogerq@ti.com>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> > drivers/memory/omap-gpmc.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> > --- a/drivers/memory/omap-gpmc.c
> > +++ b/drivers/memory/omap-gpmc.c
> > @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> > pr_info("gpmc cs%i access configuration:\n", cs);
> > GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> > GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> > - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> > + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> > GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
>
> setting shift 1 means the value will be multiplied by 2
> so this will read 0 for 8-bit and 2 for 16-bit.
>
> Is this what we want?
Yeah we already have debug output that is supposed to be usable
for configuring a new device based on debug output of the bootloader
timings. And the configured parameters use bytes for device-width.
> I'd still prefer the old way of showing RAW values than interpreted ones.
We have that too in the debug output as the raw values of
all the GPMC_CS_CONFIG registers.
Regards,
Tony
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] memory: omap-gpmc: Fix debug output for access width
@ 2017-05-08 17:36 ` Tony Lindgren
0 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2017-05-08 17:36 UTC (permalink / raw)
To: linux-arm-kernel
* Roger Quadros <rogerq@ti.com> [170508 03:44]:
> Hi Tony,
>
> On 06/05/17 01:37, Tony Lindgren wrote:
> > The width needs to be configured in bytes with 1 meaning 8-bit
> > access and 2 meaning 16-bit access.
>
> As per the TRM, for GPMC_CONFIG1.DEVICESIZE
> 0 means 8-bit
> 1 means 16-bit
>
> >
> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> > Cc: Roger Quadros <rogerq@ti.com>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> > drivers/memory/omap-gpmc.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> > --- a/drivers/memory/omap-gpmc.c
> > +++ b/drivers/memory/omap-gpmc.c
> > @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> > pr_info("gpmc cs%i access configuration:\n", cs);
> > GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> > GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> > - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> > + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> > GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
>
> setting shift 1 means the value will be multiplied by 2
> so this will read 0 for 8-bit and 2 for 16-bit.
>
> Is this what we want?
Yeah we already have debug output that is supposed to be usable
for configuring a new device based on debug output of the bootloader
timings. And the configured parameters use bytes for device-width.
> I'd still prefer the old way of showing RAW values than interpreted ones.
We have that too in the debug output as the raw values of
all the GPMC_CS_CONFIG registers.
Regards,
Tony
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
2017-05-05 22:37 ` Tony Lindgren
@ 2017-05-11 9:46 ` Roger Quadros
-1 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2017-05-11 9:46 UTC (permalink / raw)
To: Tony Lindgren, linux-omap; +Cc: linux-arm-kernel
On 06/05/17 01:37, Tony Lindgren wrote:
> The width needs to be configured in bytes with 1 meaning 8-bit
> access and 2 meaning 16-bit access.
>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/memory/omap-gpmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> pr_info("gpmc cs%i access configuration:\n", cs);
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] memory: omap-gpmc: Fix debug output for access width
@ 2017-05-11 9:46 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2017-05-11 9:46 UTC (permalink / raw)
To: linux-arm-kernel
On 06/05/17 01:37, Tony Lindgren wrote:
> The width needs to be configured in bytes with 1 meaning 8-bit
> access and 2 meaning 16-bit access.
>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/memory/omap-gpmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -513,7 +513,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
> pr_info("gpmc cs%i access configuration:\n", cs);
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
> - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
> + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
> GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
> GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
> GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-05-11 9:46 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-05 22:37 [PATCH] memory: omap-gpmc: Fix debug output for access width Tony Lindgren
2017-05-05 22:37 ` Tony Lindgren
2017-05-08 10:40 ` Roger Quadros
2017-05-08 10:40 ` Roger Quadros
2017-05-08 17:36 ` Tony Lindgren
2017-05-08 17:36 ` Tony Lindgren
2017-05-11 9:46 ` Roger Quadros
2017-05-11 9:46 ` Roger Quadros
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.