From: Khalid Aziz <khalid@gonehiking.org>
To: Joe Perches <joe@perches.com>,
"Maciej W. Rozycki" <macro@orcam.me.uk>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH 1/5] scsi: BusLogic: Fix missing `pr_cont' use
Date: Fri, 16 Apr 2021 14:41:08 -0600 [thread overview]
Message-ID: <a5a70c48-d980-b0e0-6bbd-34dae9c59c59@gonehiking.org> (raw)
In-Reply-To: <787aae5540612555a8bf92de2083c8fa74e52ce9.camel@perches.com>
On 4/15/21 8:08 PM, Joe Perches wrote:
> And while it's a lot more code, I'd prefer a solution that looks more
> like the other commonly used kernel logging extension mechanisms
> where adapter is placed before the format, ... in the argument list.
Hi Joe,
I don't mind making these changes. It is quite a bit of code but
consistency with other kernel code is useful. Would you like to finalize
this patch, or would you prefer that I take this patch as starting point
and finalize it?
Thanks,
Khalid
>
> Today it's:
>
> void blogic_msg(enum, fmt, adapter, ...);
>
> without the __printf marking so there is one format/arg mismatch.
>
> fyi: in the suggested patch below it's
> - blogic_info("BIOS Address: 0x%lX, ", adapter,
> - adapter->bios_addr);
> + blogic_cont(adapter, "BIOS Address: 0x%X, ",
> + adapter->bios_addr);
>
> I'd prefer
> __printf(3, 4)
> void blogic_msg(enum, adapter, fmt, ...)
>
> (or maybe void blogic_msg(adapter, enum, fmt, ...))
>
> And there's a simple addition of a blogic_cont macro and extension
> to blogic_msg to simplify the logic and obviousness of the logging
> extension lines too.
>
> I suggest this done with coccinelle and a little typing:
> ---
> drivers/scsi/BusLogic.c | 496 +++++++++++++++++++++++++++++++-----------------
> drivers/scsi/BusLogic.h | 32 ++--
> 2 files changed, 341 insertions(+), 187 deletions(-)
>
> diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
> index ccb061ab0a0a..7a52371b5ab6 100644
> --- a/drivers/scsi/BusLogic.c
> +++ b/drivers/scsi/BusLogic.c
> @@ -134,8 +134,10 @@ static char *blogic_cmd_failure_reason;
>
> static void blogic_announce_drvr(struct blogic_adapter *adapter)
> {
> - blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
> - blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>\n", adapter);
> + blogic_announce(adapter,
> + "***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n");
> + blogic_announce(adapter,
> + "Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>\n");
> }
>
>
> @@ -198,8 +200,7 @@ static bool __init blogic_create_initccbs(struct blogic_adapter *adapter)
> blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev,
> blk_size, &blkp, GFP_KERNEL);
> if (blk_pointer == NULL) {
> - blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
> - adapter);
> + blogic_err(adapter, "UNABLE TO ALLOCATE CCB GROUP - DETACHING\n");
> return false;
> }
> blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
> @@ -259,10 +260,13 @@ static void blogic_create_addlccbs(struct blogic_adapter *adapter,
> }
> if (adapter->alloc_ccbs > prev_alloc) {
> if (print_success)
> - blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs);
> + blogic_notice(adapter,
> + "Allocated %d additional CCBs (total now %d)\n",
> + adapter->alloc_ccbs - prev_alloc,
> + adapter->alloc_ccbs);
> return;
> }
> - blogic_notice("Failed to allocate additional CCBs\n", adapter);
> + blogic_notice(adapter, "Failed to allocate additional CCBs\n");
> if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) {
> adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count;
> adapter->scsi_host->can_queue = adapter->drvr_qdepth;
> @@ -441,7 +445,9 @@ static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode,
> goto done;
> }
> if (blogic_global_options.trace_config)
> - blogic_notice("blogic_cmd(%02X) Status = %02X: (Modify I/O Address)\n", adapter, opcode, statusreg.all);
> + blogic_notice(adapter,
> + "blogic_cmd(%02X) Status = %02X: (Modify I/O Address)\n",
> + opcode, statusreg.all);
> result = 0;
> goto done;
> }
> @@ -499,15 +505,16 @@ static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode,
> */
> if (blogic_global_options.trace_config) {
> int i;
> - blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
> - adapter, opcode, statusreg.all, replylen,
> + blogic_notice(adapter,
> + "blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
> + opcode, statusreg.all, replylen,
> reply_b);
> if (replylen > reply_b)
> replylen = reply_b;
> for (i = 0; i < replylen; i++)
> - blogic_notice(" %02X", adapter,
> - ((unsigned char *) reply)[i]);
> - blogic_notice("\n", adapter);
> + blogic_cont(adapter, " %02X",
> + ((unsigned char *)reply)[i]);
> + blogic_cont(adapter, "\n");
> }
> /*
> Process Command Invalid conditions.
> @@ -717,23 +724,37 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
> pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
>
> if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
> - blogic_err("BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n", NULL, base_addr0);
> - blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n",
> + base_addr0);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
> - blogic_err("BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n", NULL, base_addr1);
> - blogic_err("at PCI Bus %d Device %d PCI Address 0x%lX\n", NULL, bus, device, pci_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n",
> + base_addr1);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d PCI Address 0x%lX\n",
> + bus, device, pci_addr);
> continue;
> }
> if (irq_ch == 0) {
> - blogic_err("BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n", NULL, irq_ch);
> - blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n",
> + irq_ch);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (blogic_global_options.trace_probe) {
> - blogic_notice("BusLogic: PCI MultiMaster Host Adapter detected at\n", NULL);
> - blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
> + blogic_notice(NULL, "BusLogic: PCI MultiMaster Host Adapter detected at\n");
> + blogic_notice(NULL,
> + "BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n",
> + bus, device, io_addr, pci_addr);
> }
> /*
> Issue the Inquire PCI Host Adapter Information command to determine
> @@ -819,7 +840,7 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
> nonpr_mmcount++;
> mmcount++;
> } else
> - blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL);
> + blogic_warn(NULL, "BusLogic: Too many Host Adapters detected\n");
> }
> /*
> If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
> @@ -957,23 +978,37 @@ static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter)
> pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
> #ifdef CONFIG_SCSI_FLASHPOINT
> if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
> - blogic_err("BusLogic: Base Address0 0x%lX not I/O for FlashPoint Host Adapter\n", NULL, base_addr0);
> - blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address0 0x%lX not I/O for FlashPoint Host Adapter\n",
> + base_addr0);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
> - blogic_err("BusLogic: Base Address1 0x%lX not Memory for FlashPoint Host Adapter\n", NULL, base_addr1);
> - blogic_err("at PCI Bus %d Device %d PCI Address 0x%lX\n", NULL, bus, device, pci_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address1 0x%lX not Memory for FlashPoint Host Adapter\n",
> + base_addr1);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d PCI Address 0x%lX\n",
> + bus, device, pci_addr);
> continue;
> }
> if (irq_ch == 0) {
> - blogic_err("BusLogic: IRQ Channel %d invalid for FlashPoint Host Adapter\n", NULL, irq_ch);
> - blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: IRQ Channel %d invalid for FlashPoint Host Adapter\n",
> + irq_ch);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (blogic_global_options.trace_probe) {
> - blogic_notice("BusLogic: FlashPoint Host Adapter detected at\n", NULL);
> - blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
> + blogic_notice(NULL, "BusLogic: FlashPoint Host Adapter detected at\n");
> + blogic_notice(NULL,
> + "BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n",
> + bus, device, io_addr, pci_addr);
> }
> if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
> struct blogic_probeinfo *probeinfo =
> @@ -988,11 +1023,15 @@ static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter)
> probeinfo->pci_device = pci_dev_get(pci_device);
> fpcount++;
> } else
> - blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL);
> + blogic_warn(NULL, "BusLogic: Too many Host Adapters detected\n");
> #else
> - blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n", NULL, bus, device);
> - blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
> - blogic_err("BusLogic: support was omitted in this kernel configuration.\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n",
> + bus, device);
> + blogic_err(NULL,
> + "BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n",
> + io_addr, pci_addr, irq_ch);
> + blogic_err("BusLogic: support was omitted in this kernel configuration\n", NULL);
> #endif
> }
> /*
> @@ -1098,15 +1137,19 @@ static bool blogic_failure(struct blogic_adapter *adapter, char *msg)
> {
> blogic_announce_drvr(adapter);
> if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) {
> - blogic_err("While configuring BusLogic PCI Host Adapter at\n",
> - adapter);
> - blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr);
> + blogic_err(adapter, "While configuring BusLogic PCI Host Adapter at\n");
> + blogic_err(adapter,
> + "Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX:\n",
> + adapter->bus, adapter->dev, adapter->io_addr,
> + adapter->pci_addr);
> } else
> - blogic_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr);
> - blogic_err("%s FAILED - DETACHING\n", adapter, msg);
> + blogic_err(adapter,
> + "While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n",
> + adapter->io_addr);
> + blogic_err(adapter, "%s FAILED - DETACHING\n", msg);
> if (blogic_cmd_failure_reason != NULL)
> - blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter,
> - blogic_cmd_failure_reason);
> + blogic_err(adapter, "ADDITIONAL FAILURE INFO - %s\n",
> + blogic_cmd_failure_reason);
> return false;
> }
>
> @@ -1130,13 +1173,20 @@ static bool __init blogic_probe(struct blogic_adapter *adapter)
> fpinfo->present = false;
> if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 &&
> fpinfo->present)) {
> - blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
> - blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
> - blogic_err("BusLogic: Probe Function failed to validate it.\n", adapter);
> + blogic_err(adapter,
> + "BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n",
> + adapter->bus, adapter->dev);
> + blogic_err(adapter,
> + "BusLogic: I/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n",
> + adapter->io_addr, adapter->pci_addr);
> + blogic_err(adapter,
> + "BusLogic: Probe Function failed to validate it\n");
> return false;
> }
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr);
> + blogic_notice(adapter,
> + "BusLogic_Probe(0x%lX): FlashPoint Found\n",
> + adapter->io_addr);
> /*
> Indicate the Host Adapter Probe completed successfully.
> */
> @@ -1153,7 +1203,10 @@ static bool __init blogic_probe(struct blogic_adapter *adapter)
> intreg.all = blogic_rdint(adapter);
> georeg.all = blogic_rdgeom(adapter);
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all);
> + blogic_notice(adapter,
> + "BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n",
> + adapter->io_addr, statusreg.all, intreg.all,
> + georeg.all);
> if (statusreg.all == 0 || statusreg.sr.diag_active ||
> statusreg.sr.cmd_param_busy || statusreg.sr.rsvd ||
> statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0)
> @@ -1232,7 +1285,9 @@ static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1252,7 +1307,9 @@ static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Diagnostic Completed, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1268,7 +1325,9 @@ static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1280,11 +1339,11 @@ static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
> if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) {
> blogic_cmd_failure_reason = NULL;
> blogic_failure(adapter, "HARD RESET DIAGNOSTICS");
> - blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter,
> - statusreg.all);
> + blogic_err(adapter, "HOST ADAPTER STATUS REGISTER = %02X\n",
> + statusreg.all);
> if (statusreg.sr.datain_ready)
> - blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter,
> - blogic_rddatain(adapter));
> + blogic_err(adapter, "HOST ADAPTER ERROR CODE = %d\n",
> + blogic_rddatain(adapter));
> return false;
> }
> /*
> @@ -1324,9 +1383,10 @@ static bool __init blogic_checkadapter(struct blogic_adapter *adapter)
> Provide tracing information if requested and return.
> */
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n", adapter,
> - adapter->io_addr,
> - (result ? "Found" : "Not Found"));
> + blogic_notice(adapter,
> + "BusLogic_Check(0x%lX): MultiMaster %s\n",
> + adapter->io_addr,
> + (result ? "Found" : "Not Found"));
> return result;
> }
>
> @@ -1836,30 +1896,40 @@ static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
> char *tagq_msg = tagq_str;
> int tgt_id;
>
> - blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : ""));
> - blogic_info(" Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
> + blogic_info(adapter,
> + "Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n",
> + adapter->model,
> + blogic_adapter_busnames[adapter->adapter_bus_type],
> + (adapter->wide ? " Wide" : ""),
> + (adapter->differential ? " Differential" : ""),
> + (adapter->ultra ? " Ultra" : ""));
> + blogic_info(adapter,
> + " Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n",
> + adapter->fw_ver, adapter->io_addr, adapter->irq_ch,
> + (adapter->level_int ? "Level" : "Edge"));
> if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
> - blogic_info(" DMA Channel: ", adapter);
> + blogic_info(adapter, " DMA Channel: ");
> if (adapter->dma_ch > 0)
> - blogic_info("%d, ", adapter, adapter->dma_ch);
> + blogic_cont(adapter, "%d, ", adapter->dma_ch);
> else
> - blogic_info("None, ", adapter);
> + blogic_cont(adapter, "None, ");
> if (adapter->bios_addr > 0)
> - blogic_info("BIOS Address: 0x%lX, ", adapter,
> - adapter->bios_addr);
> + blogic_cont(adapter, "BIOS Address: 0x%X, ",
> + adapter->bios_addr);
> else
> - blogic_info("BIOS Address: None, ", adapter);
> + blogic_cont(adapter, "BIOS Address: None, ");
> } else {
> - blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter,
> - adapter->bus, adapter->dev);
> + blogic_cont(adapter, " PCI Bus: %d, Device: %d, Address: ",
> + adapter->bus, adapter->dev);
> if (adapter->pci_addr > 0)
> - blogic_info("0x%lX, ", adapter, adapter->pci_addr);
> + blogic_cont(adapter, "0x%lX, ", adapter->pci_addr);
> else
> - blogic_info("Unassigned, ", adapter);
> + blogic_cont(adapter, "Unassigned, ");
> }
> - blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id);
> - blogic_info(" Parity Checking: %s, Extended Translation: %s\n",
> - adapter, (adapter->parity ? "Enabled" : "Disabled"),
> + blogic_cont(adapter, "Host Adapter SCSI ID: %d\n", adapter->scsi_id);
> + blogic_info(adapter,
> + " Parity Checking: %s, Extended Translation: %s\n",
> + (adapter->parity ? "Enabled" : "Disabled"),
> (adapter->ext_trans_enable ? "Enabled" : "Disabled"));
> alltgt_mask &= ~(1 << adapter->scsi_id);
> sync_ok = adapter->sync_ok & alltgt_mask;
> @@ -1928,16 +1998,25 @@ static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
> tagq_str[adapter->scsi_id] = '#';
> tagq_str[adapter->maxdev] = '\0';
> }
> - blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n",
> - adapter, syncmsg, widemsg);
> - blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter,
> - discon_msg, tagq_msg);
> + blogic_info(adapter,
> + " Synchronous Negotiation: %s, Wide Negotiation: %s\n",
> + syncmsg, widemsg);
> + blogic_info(adapter,
> + " Disconnect/Reconnect: %s, Tagged Queuing: %s\n",
> + discon_msg, tagq_msg);
> if (blogic_multimaster_type(adapter)) {
> - blogic_info(" Scatter/Gather Limit: %d of %d segments, Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit, adapter->mbox_count);
> - blogic_info(" Driver Queue Depth: %d, Host Adapter Queue Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
> + blogic_info(adapter,
> + " Scatter/Gather Limit: %d of %d segments, Mailboxes: %d\n",
> + adapter->drvr_sglimit, adapter->adapter_sglimit,
> + adapter->mbox_count);
> + blogic_info(adapter,
> + " Driver Queue Depth: %d, Host Adapter Queue Depth: %d\n",
> + adapter->drvr_qdepth, adapter->adapter_qdepth);
> } else
> - blogic_info(" Driver Queue Depth: %d, Scatter/Gather Limit: %d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
> - blogic_info(" Tagged Queue Depth: ", adapter);
> + blogic_info(adapter,
> + " Driver Queue Depth: %d, Scatter/Gather Limit: %d segments\n",
> + adapter->drvr_qdepth, adapter->drvr_sglimit);
> + blogic_info(adapter, " Tagged Queue Depth: ");
> common_tagq_depth = true;
> for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++)
> if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) {
> @@ -1946,24 +2025,28 @@ static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
> }
> if (common_tagq_depth) {
> if (adapter->qdepth[0] > 0)
> - blogic_info("%d", adapter, adapter->qdepth[0]);
> + blogic_cont(adapter, "%d", adapter->qdepth[0]);
> else
> - blogic_info("Automatic", adapter);
> + blogic_cont(adapter, "Automatic");
> } else
> - blogic_info("Individual", adapter);
> - blogic_info(", Untagged Queue Depth: %d\n", adapter,
> - adapter->untag_qdepth);
> + blogic_cont(adapter, "Individual");
> + blogic_cont(adapter, ", Untagged Queue Depth: %d\n",
> + adapter->untag_qdepth);
> if (adapter->terminfo_valid) {
> if (adapter->wide)
> - blogic_info(" SCSI Bus Termination: %s", adapter,
> - (adapter->low_term ? (adapter->high_term ? "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" : "Both Disabled")));
> + blogic_info(adapter, " SCSI Bus Termination: %s",
> + (adapter->low_term
> + ? (adapter->high_term ? "Both Enabled" : "Low Enabled")
> + : (adapter->high_term ? "High Enabled" : "Both Disabled")));
> else
> - blogic_info(" SCSI Bus Termination: %s", adapter,
> - (adapter->low_term ? "Enabled" : "Disabled"));
> + blogic_info(adapter, " SCSI Bus Termination: %s",
> + (adapter->low_term ? "Enabled" : "Disabled"));
> if (adapter->scam)
> - blogic_info(", SCAM: %s", adapter,
> - (adapter->scam_enabled ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1") : "Disabled"));
> - blogic_info("\n", adapter);
> + blogic_cont(adapter, ", SCAM: %s",
> + (adapter->scam_enabled
> + ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1")
> + : "Disabled"));
> + blogic_cont(adapter, "\n");
> }
> /*
> Indicate reporting the Host Adapter configuration completed
> @@ -1981,8 +2064,8 @@ static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
> static bool __init blogic_getres(struct blogic_adapter *adapter)
> {
> if (adapter->irq_ch == 0) {
> - blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n",
> - adapter);
> + blogic_err(adapter,
> + "NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n");
> return false;
> }
> /*
> @@ -1990,8 +2073,9 @@ static bool __init blogic_getres(struct blogic_adapter *adapter)
> */
> if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED,
> adapter->full_model, adapter) < 0) {
> - blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
> - adapter, adapter->irq_ch);
> + blogic_err(adapter,
> + "UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
> + adapter->irq_ch);
> return false;
> }
> adapter->irq_acquired = true;
> @@ -2000,7 +2084,9 @@ static bool __init blogic_getres(struct blogic_adapter *adapter)
> */
> if (adapter->dma_ch > 0) {
> if (request_dma(adapter->dma_ch, adapter->full_model) < 0) {
> - blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", adapter, adapter->dma_ch);
> + blogic_err(adapter,
> + "UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n",
> + adapter->dma_ch);
> return false;
> }
> set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE);
> @@ -2148,12 +2234,12 @@ static bool blogic_initadapter(struct blogic_adapter *adapter)
> */
> done:
> if (!adapter->adapter_initd) {
> - blogic_info("*** %s Initialized Successfully ***\n", adapter,
> - adapter->full_model);
> - blogic_info("\n", adapter);
> + blogic_info(adapter, "*** %s Initialized Successfully ***\n",
> + adapter->full_model);
> + blogic_info(adapter, "\n");
> } else
> - blogic_warn("*** %s Initialized Successfully ***\n", adapter,
> - adapter->full_model);
> + blogic_warn(adapter, "*** %s Initialized Successfully ***\n",
> + adapter->full_model);
> adapter->adapter_initd = true;
>
> /*
> @@ -2365,15 +2451,16 @@ static int __init blogic_init(void)
> kcalloc(BLOGIC_MAX_ADAPTERS, sizeof(struct blogic_probeinfo),
> GFP_KERNEL);
> if (blogic_probeinfo_list == NULL) {
> - blogic_err("BusLogic: Unable to allocate Probe Info List\n",
> - NULL);
> + blogic_err(NULL,
> + "BusLogic: Unable to allocate Probe Info List\n");
> return -ENOMEM;
> }
>
> adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL);
> if (adapter == NULL) {
> kfree(blogic_probeinfo_list);
> - blogic_err("BusLogic: Unable to allocate Prototype Host Adapter\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Unable to allocate Prototype Host Adapter\n");
> return -ENOMEM;
> }
>
> @@ -2633,8 +2720,9 @@ static int blogic_resultcode(struct blogic_adapter *adapter,
> case BLOGIC_INVALID_OUTBOX_CODE:
> case BLOGIC_INVALID_CMD_CODE:
> case BLOGIC_BAD_CMD_PARAM:
> - blogic_warn("BusLogic Driver Protocol Error 0x%02X\n",
> - adapter, adapter_status);
> + blogic_warn(adapter,
> + "BusLogic Driver Protocol Error 0x%02X\n",
> + adapter_status);
> fallthrough;
> case BLOGIC_DATA_UNDERRUN:
> case BLOGIC_DATA_OVERRUN:
> @@ -2659,8 +2747,8 @@ static int blogic_resultcode(struct blogic_adapter *adapter,
> hoststatus = DID_RESET;
> break;
> default:
> - blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter,
> - adapter_status);
> + blogic_warn(adapter, "Unknown Host Adapter Status 0x%02X\n",
> + adapter_status);
> hoststatus = DID_ERROR;
> break;
> }
> @@ -2718,7 +2806,9 @@ static void blogic_scan_inbox(struct blogic_adapter *adapter)
> then there is most likely a bug in
> the Host Adapter firmware.
> */
> - blogic_warn("Illegal CCB #%ld status %d in Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
> + blogic_warn(adapter,
> + "Illegal CCB #%ld status %d in Incoming Mailbox\n",
> + ccb->serial, ccb->status);
> }
> }
> next_inbox->comp_code = BLOGIC_INBOX_FREE;
> @@ -2753,7 +2843,9 @@ static void blogic_process_ccbs(struct blogic_adapter *adapter)
> if (ccb->opcode == BLOGIC_BDR) {
> int tgt_id = ccb->tgt_id;
>
> - blogic_warn("Bus Device Reset CCB #%ld to Target %d Completed\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter,
> + "Bus Device Reset CCB #%ld to Target %d Completed\n",
> + ccb->serial, tgt_id);
> blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done);
> adapter->tgt_flags[tgt_id].tagq_active = false;
> adapter->cmds_since_rst[tgt_id] = 0;
> @@ -2806,7 +2898,9 @@ static void blogic_process_ccbs(struct blogic_adapter *adapter)
> case BLOGIC_INBOX_FREE:
> case BLOGIC_CMD_NOTFOUND:
> case BLOGIC_INVALID_CCB:
> - blogic_warn("CCB #%ld to Target %d Impossible State\n", adapter, ccb->serial, ccb->tgt_id);
> + blogic_warn(adapter,
> + "CCB #%ld to Target %d Impossible State\n",
> + ccb->serial, ccb->tgt_id);
> break;
> case BLOGIC_CMD_COMPLETE_GOOD:
> adapter->tgt_stats[ccb->tgt_id]
> @@ -2816,8 +2910,9 @@ static void blogic_process_ccbs(struct blogic_adapter *adapter)
> command->result = DID_OK << 16;
> break;
> case BLOGIC_CMD_ABORT_BY_HOST:
> - blogic_warn("CCB #%ld to Target %d Aborted\n",
> - adapter, ccb->serial, ccb->tgt_id);
> + blogic_warn(adapter,
> + "CCB #%ld to Target %d Aborted\n",
> + ccb->serial, ccb->tgt_id);
> blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done);
> command->result = DID_ABORT << 16;
> break;
> @@ -2829,16 +2924,26 @@ static void blogic_process_ccbs(struct blogic_adapter *adapter)
> .cmds_complete++;
> if (blogic_global_options.trace_err) {
> int i;
> - blogic_notice("CCB #%ld Target %d: Result %X Host "
> - "Adapter Status %02X Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result, ccb->adapter_status, ccb->tgt_status);
> - blogic_notice("CDB ", adapter);
> + blogic_notice(adapter,
> + "CCB #%ld Target %d: Result %X Host Adapter Status %02X Target Status %02X\n",
> + ccb->serial,
> + ccb->tgt_id,
> + command->result,
> + ccb->adapter_status,
> + ccb->tgt_status);
> + blogic_notice(adapter,
> + "CDB ");
> for (i = 0; i < ccb->cdblen; i++)
> - blogic_notice(" %02X", adapter, ccb->cdb[i]);
> - blogic_notice("\n", adapter);
> - blogic_notice("Sense ", adapter);
> + blogic_cont(adapter,
> + " %02X",
> + ccb->cdb[i]);
> + blogic_cont(adapter, "\n");
> + blogic_notice(adapter, "Sense ");
> for (i = 0; i < ccb->sense_datalen; i++)
> - blogic_notice(" %02X", adapter, command->sense_buffer[i]);
> - blogic_notice("\n", adapter);
> + blogic_cont(adapter,
> + " %02X",
> + command->sense_buffer[i]);
> + blogic_cont(adapter, "\n");
> }
> }
> break;
> @@ -2925,7 +3030,8 @@ static irqreturn_t blogic_inthandler(int irq_ch, void *devid)
> adapter->adapter_extreset = true;
> break;
> case FPOINT_INTERN_ERR:
> - blogic_warn("Internal FlashPoint Error detected - Resetting Host Adapter\n", adapter);
> + blogic_warn(adapter,
> + "Internal FlashPoint Error detected - Resetting Host Adapter\n");
> adapter->adapter_intern_err = true;
> break;
> }
> @@ -2939,12 +3045,16 @@ static irqreturn_t blogic_inthandler(int irq_ch, void *devid)
> Reset the Host Adapter if requested.
> */
> if (adapter->adapter_extreset) {
> - blogic_warn("Resetting %s due to External SCSI Bus Reset\n", adapter, adapter->full_model);
> + blogic_warn(adapter,
> + "Resetting %s due to External SCSI Bus Reset\n",
> + adapter->full_model);
> blogic_inc_count(&adapter->ext_resets);
> blogic_resetadapter(adapter, false);
> adapter->adapter_extreset = false;
> } else if (adapter->adapter_intern_err) {
> - blogic_warn("Resetting %s due to Host Adapter Internal Error\n", adapter, adapter->full_model);
> + blogic_warn(adapter,
> + "Resetting %s due to Host Adapter Internal Error\n",
> + adapter->full_model);
> blogic_inc_count(&adapter->adapter_intern_errors);
> blogic_resetadapter(adapter, true);
> adapter->adapter_intern_err = false;
> @@ -3142,8 +3252,9 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> && tgt_flags->tagq_ok &&
> (adapter->tagq_ok & (1 << tgt_id))) {
> tgt_flags->tagq_active = true;
> - blogic_notice("Tagged Queuing now active for Target %d\n",
> - adapter, tgt_id);
> + blogic_notice(adapter,
> + "Tagged Queuing now active for Target %d\n",
> + tgt_id);
> }
> if (tgt_flags->tagq_active) {
> enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG;
> @@ -3184,8 +3295,8 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> command->sense_buffer, ccb->sense_datalen,
> DMA_FROM_DEVICE);
> if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) {
> - blogic_err("DMA mapping for sense data buffer failed\n",
> - adapter);
> + blogic_err(adapter,
> + "DMA mapping for sense data buffer failed\n");
> blogic_dealloc_ccb(ccb, 0);
> return SCSI_MLQUEUE_HOST_BUSY;
> }
> @@ -3204,12 +3315,12 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> */
> if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) {
> spin_unlock_irq(adapter->scsi_host->host_lock);
> - blogic_warn("Unable to write Outgoing Mailbox - Pausing for 1 second\n", adapter);
> + blogic_warn(adapter, "Unable to write Outgoing Mailbox - Pausing for 1 second\n");
> blogic_delay(1);
> spin_lock_irq(adapter->scsi_host->host_lock);
> if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START,
> ccb)) {
> - blogic_warn("Still unable to write Outgoing Mailbox - Host Adapter Dead?\n", adapter);
> + blogic_warn(adapter, "Still unable to write Outgoing Mailbox - Host Adapter Dead?\n");
> blogic_dealloc_ccb(ccb, 1);
> command->result = DID_ERROR << 16;
> command->scsi_done(command);
> @@ -3259,13 +3370,16 @@ static int blogic_abort(struct scsi_cmnd *command)
> if (ccb->command == command)
> break;
> if (ccb == NULL) {
> - blogic_warn("Unable to Abort Command to Target %d - No CCB Found\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d - No CCB Found\n",
> + tgt_id);
> return SUCCESS;
> } else if (ccb->status == BLOGIC_CCB_COMPLETE) {
> - blogic_warn("Unable to Abort Command to Target %d - CCB Completed\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d - CCB Completed\n",
> + tgt_id);
> return SUCCESS;
> } else if (ccb->status == BLOGIC_CCB_RESET) {
> - blogic_warn("Unable to Abort Command to Target %d - CCB Reset\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d - CCB Reset\n",
> + tgt_id);
> return SUCCESS;
> }
> if (blogic_multimaster_type(adapter)) {
> @@ -3283,16 +3397,18 @@ static int blogic_abort(struct scsi_cmnd *command)
> */
> if (adapter->tgt_flags[tgt_id].tagq_active &&
> adapter->fw_ver[0] < '5') {
> - blogic_warn("Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n",
> + ccb->serial, tgt_id);
> return FAILURE;
> } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT,
> ccb)) {
> - blogic_warn("Aborting CCB #%ld to Target %d\n",
> - adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Aborting CCB #%ld to Target %d\n",
> + ccb->serial, tgt_id);
> blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
> return SUCCESS;
> } else {
> - blogic_warn("Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n",
> + ccb->serial, tgt_id);
> return FAILURE;
> }
> } else {
> @@ -3300,8 +3416,8 @@ static int blogic_abort(struct scsi_cmnd *command)
> Call the FlashPoint SCCB Manager to abort execution of
> the CCB.
> */
> - blogic_warn("Aborting CCB #%ld to Target %d\n", adapter,
> - ccb->serial, tgt_id);
> + blogic_warn(adapter, "Aborting CCB #%ld to Target %d\n",
> + ccb->serial, tgt_id);
> blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
> FlashPoint_AbortCCB(adapter->cardhandle, ccb);
> /*
> @@ -3333,8 +3449,8 @@ static int blogic_resetadapter(struct blogic_adapter *adapter, bool hard_reset)
>
> if (!(blogic_hwreset(adapter, hard_reset) &&
> blogic_initadapter(adapter))) {
> - blogic_err("Resetting %s Failed\n", adapter,
> - adapter->full_model);
> + blogic_err(adapter, "Resetting %s Failed\n",
> + adapter->full_model);
> return FAILURE;
> }
>
> @@ -3443,10 +3559,15 @@ static int blogic_diskparam(struct scsi_device *sdev, struct block_device *dev,
> diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors);
> if (part_no < 4 && part_end_sector == diskparam->sectors) {
> if (diskparam->cylinders != saved_cyl)
> - blogic_warn("Adopting Geometry %d/%d from Partition Table\n", adapter, diskparam->heads, diskparam->sectors);
> + blogic_warn(adapter,
> + "Adopting Geometry %d/%d from Partition Table\n",
> + diskparam->heads,
> + diskparam->sectors);
> } else if (part_end_head > 0 || part_end_sector > 0) {
> - blogic_warn("Warning: Partition Table appears to have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
> - blogic_warn("not compatible with current BusLogic Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
> + blogic_warn(adapter,
> + "Warning: Partition Table appears to have Geometry %d/%d which is not compatible with current BusLogic Host Adapter Geometry %d/%d\n",
> + part_end_head + 1, part_end_sector,
> + diskparam->heads, diskparam->sectors);
> }
> }
> kfree(buf);
> @@ -3571,6 +3692,7 @@ Target Requested Completed Requested Completed Requested Completed\n\
> }
> seq_printf(m, "\nExternal Host Adapter Resets: %d\n", adapter->ext_resets);
> seq_printf(m, "Host Adapter Internal Errors: %d\n", adapter->adapter_intern_errors);
> +
> return 0;
> }
>
> @@ -3579,41 +3701,51 @@ Target Requested Completed Requested Completed Requested Completed\n\
> blogic_msg prints Driver Messages.
> */
>
> -static void blogic_msg(enum blogic_msglevel msglevel, char *fmt,
> - struct blogic_adapter *adapter, ...)
> +static void blogic_msg(enum blogic_msglevel msglevel,
> + struct blogic_adapter *adapter, const char *fmt, ...)
> {
> static char buf[BLOGIC_LINEBUF_SIZE];
> - static bool begin = true;
> va_list args;
> int len = 0;
> + const char *kern_level = blogic_msglevelmap[msglevel];
>
> - va_start(args, adapter);
> - len = vsprintf(buf, fmt, args);
> + va_start(args, fmt);
> + len = vscnprintf(buf, sizeof(buf), fmt, args);
> va_end(args);
> - if (msglevel == BLOGIC_ANNOUNCE_LEVEL) {
> +
> + switch (msglevel) {
> + case BLOGIC_ANNOUNCE_LEVEL: {
> static int msglines = 0;
> +
> strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> adapter->msgbuflen += len;
> if (++msglines <= 2)
> - printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf);
> - } else if (msglevel == BLOGIC_INFO_LEVEL) {
> + printk("%sscsi: %s", kern_level, buf);
> + break;
> + }
> +
> + case BLOGIC_INFO_LEVEL:
> strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> adapter->msgbuflen += len;
> - if (begin) {
> - if (buf[0] != '\n' || len > 1)
> - printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
> - } else
> - printk("%s", buf);
> - } else {
> - if (begin) {
> - if (adapter != NULL && adapter->adapter_initd)
> - printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
> - else
> - printk("%s%s", blogic_msglevelmap[msglevel], buf);
> - } else
> - printk("%s", buf);
> + if (buf[0] != '\n' || len > 1)
> + printk("%sscsi%d: %s",
> + kern_level, adapter->host_no, buf);
> + break;
> +
> + case BLOGIC_CONT_LEVEL:
> + strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> + adapter->msgbuflen += len;
> + printk("%s%s", kern_level, buf);
> + break;
> +
> + default:
> + if (adapter && adapter->adapter_initd)
> + printk("%sscsi%d: %s",
> + kern_level, adapter->host_no, buf);
> + else
> + printk("%s%s", kern_level, buf);
> + break;
> }
> - begin = (buf[len - 1] == '\n');
> }
>
>
> @@ -3691,7 +3823,9 @@ static int __init blogic_parseopts(char *options)
> blogic_probe_options.probe134 = true;
> break;
> default:
> - blogic_err("BusLogic: Invalid Driver Options (invalid I/O Address 0x%lX)\n", NULL, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (invalid I/O Address 0x%lX)\n",
> + io_addr);
> return 0;
> }
> } else if (blogic_parse(&options, "NoProbeISA"))
> @@ -3712,7 +3846,9 @@ static int __init blogic_parseopts(char *options)
> for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) {
> unsigned short qdepth = simple_strtoul(options, &options, 0);
> if (qdepth > BLOGIC_MAX_TAG_DEPTH) {
> - blogic_err("BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n", NULL, qdepth);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n",
> + qdepth);
> return 0;
> }
> drvr_opts->qdepth[tgt_id] = qdepth;
> @@ -3721,12 +3857,16 @@ static int __init blogic_parseopts(char *options)
> else if (*options == ']')
> break;
> else {
> - blogic_err("BusLogic: Invalid Driver Options (',' or ']' expected at '%s')\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (',' or ']' expected at '%s')\n",
> + options);
> return 0;
> }
> }
> if (*options != ']') {
> - blogic_err("BusLogic: Invalid Driver Options (']' expected at '%s')\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (']' expected at '%s')\n",
> + options);
> return 0;
> } else
> options++;
> @@ -3734,7 +3874,9 @@ static int __init blogic_parseopts(char *options)
> unsigned short qdepth = simple_strtoul(options, &options, 0);
> if (qdepth == 0 ||
> qdepth > BLOGIC_MAX_TAG_DEPTH) {
> - blogic_err("BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n", NULL, qdepth);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n",
> + qdepth);
> return 0;
> }
> drvr_opts->common_qdepth = qdepth;
> @@ -3780,7 +3922,9 @@ static int __init blogic_parseopts(char *options)
> unsigned short bus_settle_time =
> simple_strtoul(options, &options, 0);
> if (bus_settle_time > 5 * 60) {
> - blogic_err("BusLogic: Invalid Driver Options (invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (invalid Bus Settle Time %d)\n",
> + bus_settle_time);
> return 0;
> }
> drvr_opts->bus_settle_time = bus_settle_time;
> @@ -3805,14 +3949,17 @@ static int __init blogic_parseopts(char *options)
> if (*options == ',')
> options++;
> else if (*options != ';' && *options != '\0') {
> - blogic_err("BusLogic: Unexpected Driver Option '%s' ignored\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Unexpected Driver Option '%s' ignored\n",
> + options);
> *options = '\0';
> }
> }
> if (!(blogic_drvr_options_count == 0 ||
> blogic_probeinfo_count == 0 ||
> blogic_drvr_options_count == blogic_probeinfo_count)) {
> - blogic_err("BusLogic: Invalid Driver Options (all or no I/O Addresses must be specified)\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (all or no I/O Addresses must be specified)\n");
> return 0;
> }
> /*
> @@ -3866,7 +4013,8 @@ static int __init blogic_setup(char *str)
> (void) get_options(str, ARRAY_SIZE(ints), ints);
>
> if (ints[0] != 0) {
> - blogic_err("BusLogic: Obsolete Command Line Entry Format Ignored\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Obsolete Command Line Entry Format Ignored\n");
> return 0;
> }
> if (str == NULL || *str == '\0')
> diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
> index 6182cc8a0344..42333fba6005 100644
> --- a/drivers/scsi/BusLogic.h
> +++ b/drivers/scsi/BusLogic.h
> @@ -108,30 +108,34 @@ enum blogic_msglevel {
> BLOGIC_INFO_LEVEL = 1,
> BLOGIC_NOTICE_LEVEL = 2,
> BLOGIC_WARN_LEVEL = 3,
> - BLOGIC_ERR_LEVEL = 4
> + BLOGIC_ERR_LEVEL = 4,
> + BLOGIC_CONT_LEVEL = 5,
> };
>
> -static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
> +static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR, KERN_CONT };
>
>
> /*
> Define Driver Message macros.
> */
>
> -#define blogic_announce(format, args...) \
> - blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args)
> +#define blogic_announce(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_ANNOUNCE_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_info(format, args...) \
> - blogic_msg(BLOGIC_INFO_LEVEL, format, ##args)
> +#define blogic_cont(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_CONT_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_notice(format, args...) \
> - blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args)
> +#define blogic_info(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_INFO_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_warn(format, args...) \
> - blogic_msg(BLOGIC_WARN_LEVEL, format, ##args)
> +#define blogic_notice(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_NOTICE_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_err(format, args...) \
> - blogic_msg(BLOGIC_ERR_LEVEL, format, ##args)
> +#define blogic_warn(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_WARN_LEVEL, adapter, fmt, ##__VA_ARGS__)
> +
> +#define blogic_err(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_ERR_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
>
> /*
> @@ -1289,7 +1293,9 @@ static int blogic_slaveconfig(struct scsi_device *);
> static void blogic_qcompleted_ccb(struct blogic_ccb *);
> static irqreturn_t blogic_inthandler(int, void *);
> static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
> -static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *, ...);
> +__printf(3, 4)
> +static void blogic_msg(enum blogic_msglevel, struct blogic_adapter *adapter,
> + const char *fmt, ...);
> static int __init blogic_setup(char *);
>
> #endif /* _BUSLOGIC_H */
>
>
next prev parent reply other threads:[~2021-04-16 20:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 22:38 [PATCH 0/5] Bring the BusLogic host bus adapter driver up to Y2021 Maciej W. Rozycki
2021-04-14 22:39 ` [PATCH 1/5] scsi: BusLogic: Fix missing `pr_cont' use Maciej W. Rozycki
2021-04-16 2:08 ` Joe Perches
2021-04-16 10:48 ` Maciej W. Rozycki
2021-04-16 14:02 ` Joe Perches
2021-04-16 14:28 ` Maciej W. Rozycki
2021-04-16 15:12 ` Joe Perches
2021-04-17 11:39 ` David Laight
2021-04-17 14:01 ` Maciej W. Rozycki
2021-04-16 20:41 ` Khalid Aziz [this message]
2021-04-17 0:09 ` Joe Perches
2021-04-16 19:34 ` Khalid Aziz
2021-04-14 22:39 ` [PATCH 2/5] scsi: BusLogic: Avoid unbounded `vsprintf' use Maciej W. Rozycki
2021-04-16 19:54 ` Khalid Aziz
2021-04-14 22:39 ` [PATCH 3/5] scsi: Provide for avoiding trailing allocation length with VPD inquiries Maciej W. Rozycki
2021-04-14 22:39 ` [PATCH 4/5] scsi: Avoid using reserved length byte " Maciej W. Rozycki
2021-04-14 22:39 ` [PATCH 5/5] scsi: Set allocation length to 255 for ATA Information VPD page Maciej W. Rozycki
2021-04-15 12:42 ` Nix
2021-04-16 15:18 ` Maciej W. Rozycki
2021-04-16 19:36 ` [PATCH 0/5] Bring the BusLogic host bus adapter driver up to Y2021 Khalid Aziz
2021-04-16 21:25 ` Maciej W. Rozycki
2021-04-18 20:21 ` Ondrej Zary
2021-04-19 15:06 ` Khalid Aziz
2021-04-19 16:01 ` Maciej W. Rozycki
2021-04-20 2:16 ` Khalid Aziz
2021-04-20 18:02 ` Maciej W. Rozycki
2021-04-22 2:36 ` Khalid Aziz
2021-04-22 16:27 ` Maciej W. Rozycki
2021-04-22 18:07 ` Khalid Aziz
2021-04-22 23:19 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a5a70c48-d980-b0e0-6bbd-34dae9c59c59@gonehiking.org \
--to=khalid@gonehiking.org \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=macro@orcam.me.uk \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.