* [PATCH V6] GCOV: Add config to check the preqequisites situation
@ 2020-06-18 10:08 gengcixi
[not found] ` <2fae67c7637f4e978cb54c3b96090788@BJMBX01.spreadtrum.com>
0 siblings, 1 reply; 3+ messages in thread
From: gengcixi @ 2020-06-18 10:08 UTC (permalink / raw)
To: gregkh, jslaby, oberpar, linux-serial, linux-kernel
Cc: orsonzhai, zhang.lyra, Cixi Geng
From: Cixi Geng <cixi.geng1@unisoc.com>
Introduce new configuration option GCOV_PROFILE_PREREQS that can be
used to check whether the prerequisites for enabling gcov profiling
for specific files and directories are met.
Only add SERIAL_GCOV for an example.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
---
drivers/tty/serial/Kconfig | 7 +++++++
drivers/tty/serial/Makefile | 1 +
kernel/gcov/Kconfig | 10 ++++++++++
3 files changed, 18 insertions(+)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index adf9e80e7dc9..6df002370f18 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1566,3 +1566,10 @@ endmenu
config SERIAL_MCTRL_GPIO
tristate
+
+config SERIAL_GCOV
+ bool "Enable profile gcov for serial directory"
+ depends on GCOV_PROFILE_PREREQS
+ help
+ The SERIAL_GCOV will add Gcov profiling flags when kernel compiles.
+ Say 'Y' here if you want the gcov data for the serial directory,
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d056ee6cca33..17272733db95 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,6 +3,7 @@
# Makefile for the kernel serial device drivers.
#
+GCOV_PROFILE := $(CONFIG_SERIAL_GCOV)
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 3941a9c48f83..f415c4aaf0ab 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL
larger and run slower. Also be sure to exclude files from profiling
which are not linked to the kernel image to prevent linker errors.
+config GCOV_PROFILE_PREREQS
+ bool "Profile Kernel for prereqs"
+ default y if GCOV_KERNEL && !COMPILE_TEST
+ help
+ This options activates profiling for the specified kernel modules.
+
+ When some modules need Gcov data, enable this config, then configure
+ with gcov on the corresponding modules,The directories or files of
+ these modules will be added profiling flags after kernel compile.
+
choice
prompt "Specify GCOV format"
depends on GCOV_KERNEL
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V6] GCOV: Add config to check the preqequisites situation
[not found] ` <2fae67c7637f4e978cb54c3b96090788@BJMBX01.spreadtrum.com>
@ 2020-07-16 12:38 ` Cixi Geng
2020-07-23 9:47 ` Peter Oberparleiter
0 siblings, 1 reply; 3+ messages in thread
From: Cixi Geng @ 2020-07-16 12:38 UTC (permalink / raw)
To: Greg KH, jslaby, Peter Oberparleiter, linux-serial, linux-kernel
Cc: Cixi Geng1, Orson Zhai, zhang.lyra
Hi All:
Does this patch need more modification?
> 发件人: gengcixi@gmail.com <gengcixi@gmail.com>
> 发送时间: 2020年6月18日 18:08
> 收件人: gregkh@linuxfoundation.org; jslaby@suse.com; oberpar@linux.ibm.com; linux-serial@vger.kernel.org; linux-kernel@vger.kernel.org
> 抄送: orsonzhai@gmail.com; zhang.lyra@gmail.com; 耿慈熙 (Cixi Geng/10039)
> 主题: [PATCH V6] GCOV: Add config to check the preqequisites situation
>
> From: Cixi Geng <cixi.geng1@unisoc.com>
>
> Introduce new configuration option GCOV_PROFILE_PREREQS that can be
> used to check whether the prerequisites for enabling gcov profiling
> for specific files and directories are met.
>
> Only add SERIAL_GCOV for an example.
>
> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
> ---
> drivers/tty/serial/Kconfig | 7 +++++++
> drivers/tty/serial/Makefile | 1 +
> kernel/gcov/Kconfig | 10 ++++++++++
> 3 files changed, 18 insertions(+)
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index adf9e80e7dc9..6df002370f18 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1566,3 +1566,10 @@ endmenu
>
> config SERIAL_MCTRL_GPIO
> tristate
> +
> +config SERIAL_GCOV
> + bool "Enable profile gcov for serial directory"
> + depends on GCOV_PROFILE_PREREQS
> + help
> + The SERIAL_GCOV will add Gcov profiling flags when kernel compiles.
> + Say 'Y' here if you want the gcov data for the serial directory,
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index d056ee6cca33..17272733db95 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -3,6 +3,7 @@
> # Makefile for the kernel serial device drivers.
> #
>
> +GCOV_PROFILE := $(CONFIG_SERIAL_GCOV)
> obj-$(CONFIG_SERIAL_CORE) += serial_core.o
>
> obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
> diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
> index 3941a9c48f83..f415c4aaf0ab 100644
> --- a/kernel/gcov/Kconfig
> +++ b/kernel/gcov/Kconfig
> @@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL
> larger and run slower. Also be sure to exclude files from profiling
> which are not linked to the kernel image to prevent linker errors.
>
> +config GCOV_PROFILE_PREREQS
> + bool "Profile Kernel for prereqs"
> + default y if GCOV_KERNEL && !COMPILE_TEST
> + help
> + This options activates profiling for the specified kernel modules.
> +
> + When some modules need Gcov data, enable this config, then configure
> + with gcov on the corresponding modules,The directories or files of
> + these modules will be added profiling flags after kernel compile.
> +
> choice
> prompt "Specify GCOV format"
> depends on GCOV_KERNEL
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V6] GCOV: Add config to check the preqequisites situation
2020-07-16 12:38 ` Cixi Geng
@ 2020-07-23 9:47 ` Peter Oberparleiter
0 siblings, 0 replies; 3+ messages in thread
From: Peter Oberparleiter @ 2020-07-23 9:47 UTC (permalink / raw)
To: Cixi Geng, Greg KH, jslaby, linux-serial, linux-kernel
Cc: Cixi Geng1, Orson Zhai, zhang.lyra
On 16.07.2020 14:38, Cixi Geng wrote:
> Hi All:
> Does this patch need more modification?
Yes. As it is now there's still a prompt for the prereq symbol. There
should be no prompt for this symbol in the config dialog.
[...]
>> diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
>> index 3941a9c48f83..f415c4aaf0ab 100644
>> --- a/kernel/gcov/Kconfig
>> +++ b/kernel/gcov/Kconfig
>> @@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL
>> larger and run slower. Also be sure to exclude files from profiling
>> which are not linked to the kernel image to prevent linker errors.
>>
>> +config GCOV_PROFILE_PREREQS
>> + bool "Profile Kernel for prereqs"
>> + default y if GCOV_KERNEL && !COMPILE_TEST
>> + help
>> + This options activates profiling for the specified kernel modules.
>> +
>> + When some modules need Gcov data, enable this config, then configure
>> + with gcov on the corresponding modules,The directories or files of
>> + these modules will be added profiling flags after kernel compile.
>> +
Replace the portion above with these lines:
config GCOV_PROFILE_PREREQS
def_bool y if GCOV_KERNEL && !COMPILE_TEST
--
Peter Oberparleiter
Linux on Z Development - IBM Germany
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-23 9:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-18 10:08 [PATCH V6] GCOV: Add config to check the preqequisites situation gengcixi
[not found] ` <2fae67c7637f4e978cb54c3b96090788@BJMBX01.spreadtrum.com>
2020-07-16 12:38 ` Cixi Geng
2020-07-23 9:47 ` Peter Oberparleiter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.