* [bug report] wifi: iwlwifi: mei: implement PLDR flow
@ 2022-11-21 15:25 Dan Carpenter
2022-11-21 16:40 ` Greenman, Gregory
0 siblings, 1 reply; 2+ messages in thread
From: Dan Carpenter @ 2022-11-21 15:25 UTC (permalink / raw)
To: avraham.stern; +Cc: linux-wireless
Hello Avraham Stern,
The patch 733eb54f62c6: "wifi: iwlwifi: mei: implement PLDR flow"
from Nov 2, 2022, leads to the following unpublished Smatch static
checker warning:
drivers/net/wireless/intel/iwlwifi/mvm/fw.c:407 iwl_mvm_load_ucode_wait_alive() warn: duplicate check 'ret' (previous on line 357)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c:1471 iwl_mvm_up() warn: missing error code? 'ret'
drivers/net/wireless/intel/iwlwifi/mvm/fw.c
311 static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
312 enum iwl_ucode_type ucode_type)
313 {
314 struct iwl_notification_wait alive_wait;
315 struct iwl_mvm_alive_data alive_data = {};
316 const struct fw_img *fw;
317 int ret;
318 enum iwl_ucode_type old_type = mvm->fwrt.cur_fw_img;
319 static const u16 alive_cmd[] = { UCODE_ALIVE_NTFY };
320 bool run_in_rfkill =
321 ucode_type == IWL_UCODE_INIT || iwl_mvm_has_unified_ucode(mvm);
322
323 if (ucode_type == IWL_UCODE_REGULAR &&
324 iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE) &&
325 !(fw_has_capa(&mvm->fw->ucode_capa,
326 IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED)))
327 fw = iwl_get_ucode_image(mvm->fw, IWL_UCODE_REGULAR_USNIFFER);
328 else
329 fw = iwl_get_ucode_image(mvm->fw, ucode_type);
330 if (WARN_ON(!fw))
331 return -EINVAL;
332 iwl_fw_set_current_image(&mvm->fwrt, ucode_type);
333 clear_bit(IWL_MVM_STATUS_FIRMWARE_RUNNING, &mvm->status);
334
335 iwl_init_notification_wait(&mvm->notif_wait, &alive_wait,
336 alive_cmd, ARRAY_SIZE(alive_cmd),
337 iwl_alive_fn, &alive_data);
338
339 /*
340 * We want to load the INIT firmware even in RFKILL
341 * For the unified firmware case, the ucode_type is not
342 * INIT, but we still need to run it.
343 */
344 ret = iwl_trans_start_fw(mvm->trans, fw, run_in_rfkill);
345 if (ret) {
346 iwl_fw_set_current_image(&mvm->fwrt, old_type);
347 iwl_remove_notification(&mvm->notif_wait, &alive_wait);
348 return ret;
349 }
350
351 /*
352 * Some things may run in the background now, but we
353 * just wait for the ALIVE notification here.
354 */
355 ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait,
356 MVM_UCODE_ALIVE_TIMEOUT);
357 if (ret) {
358 struct iwl_trans *trans = mvm->trans;
359
360 /* SecBoot info */
361 if (trans->trans_cfg->device_family >=
362 IWL_DEVICE_FAMILY_22000) {
363 IWL_ERR(mvm,
364 "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n",
365 iwl_read_umac_prph(trans, UMAG_SB_CPU_1_STATUS),
366 iwl_read_umac_prph(trans,
367 UMAG_SB_CPU_2_STATUS));
368 } else if (trans->trans_cfg->device_family >=
369 IWL_DEVICE_FAMILY_8000) {
370 IWL_ERR(mvm,
371 "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n",
372 iwl_read_prph(trans, SB_CPU_1_STATUS),
373 iwl_read_prph(trans, SB_CPU_2_STATUS));
374 }
375
376 iwl_mvm_print_pd_notification(mvm);
377
378 /* LMAC/UMAC PC info */
379 if (trans->trans_cfg->device_family >=
380 IWL_DEVICE_FAMILY_9000) {
381 IWL_ERR(mvm, "UMAC PC: 0x%x\n",
382 iwl_read_umac_prph(trans,
383 UREG_UMAC_CURRENT_PC));
384 IWL_ERR(mvm, "LMAC PC: 0x%x\n",
385 iwl_read_umac_prph(trans,
386 UREG_LMAC1_CURRENT_PC));
387 if (iwl_mvm_is_cdb_supported(mvm))
388 IWL_ERR(mvm, "LMAC2 PC: 0x%x\n",
389 iwl_read_umac_prph(trans,
390 UREG_LMAC2_CURRENT_PC));
391 }
392
393 if (ret == -ETIMEDOUT)
394 iwl_fw_dbg_error_collect(&mvm->fwrt,
395 FW_DBG_TRIGGER_ALIVE_TIMEOUT);
396
397 iwl_fw_set_current_image(&mvm->fwrt, old_type);
398 return ret;
^^^^^^^^^^^
399 }
400
401 if (!alive_data.valid) {
402 IWL_ERR(mvm, "Loaded ucode is not valid!\n");
403 iwl_fw_set_current_image(&mvm->fwrt, old_type);
404 return -EIO;
405 }
406
--> 407 iwl_mei_alive_notif(!ret);
We know that "ret" is zero.
408
409 ret = iwl_pnvm_load(mvm->trans, &mvm->notif_wait);
410 if (ret) {
[ snip ]
1455 int iwl_mvm_up(struct iwl_mvm *mvm)
1456 {
1457 int ret, i;
1458 struct ieee80211_channel *chan;
1459 struct cfg80211_chan_def chandef;
1460 struct ieee80211_supported_band *sband = NULL;
1461 u32 sb_cfg;
1462
1463 lockdep_assert_held(&mvm->mutex);
1464
1465 ret = iwl_trans_start_hw(mvm->trans);
1466 if (ret)
1467 return ret;
1468
1469 sb_cfg = iwl_read_umac_prph(mvm->trans, SB_MODIFY_CFG_FLAG);
1470 if (!(sb_cfg & SB_CFG_RESIDES_IN_OTP_MASK) && iwl_mei_pldr_req())
1471 return ret;
Probably return -EINVAL was intended. (This code actually inspired me
to create this static checker warning. ;) So it hasn't been tested yet.
Will test tonight. Gotta run though...)
1472
1473 ret = iwl_mvm_load_rt_fw(mvm);
1474 if (ret) {
regards,
dan carpenter
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [bug report] wifi: iwlwifi: mei: implement PLDR flow
2022-11-21 15:25 [bug report] wifi: iwlwifi: mei: implement PLDR flow Dan Carpenter
@ 2022-11-21 16:40 ` Greenman, Gregory
0 siblings, 0 replies; 2+ messages in thread
From: Greenman, Gregory @ 2022-11-21 16:40 UTC (permalink / raw)
To: error27, Stern, Avraham; +Cc: linux-wireless
On Mon, 2022-11-21 at 18:25 +0300, Dan Carpenter wrote:
> Hello Avraham Stern,
>
> The patch 733eb54f62c6: "wifi: iwlwifi: mei: implement PLDR flow"
> from Nov 2, 2022, leads to the following unpublished Smatch static
> checker warning:
>
> drivers/net/wireless/intel/iwlwifi/mvm/fw.c:407 iwl_mvm_load_ucode_wait_alive() warn: duplicate check 'ret' (previous on line 357)
> drivers/net/wireless/intel/iwlwifi/mvm/fw.c:1471 iwl_mvm_up() warn: missing error code? 'ret'
>
> drivers/net/wireless/intel/iwlwifi/mvm/fw.c
> 311 static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
> 312 enum iwl_ucode_type ucode_type)
> 313 {
> 314 struct iwl_notification_wait alive_wait;
> 315 struct iwl_mvm_alive_data alive_data = {};
> 316 const struct fw_img *fw;
> 317 int ret;
> 318 enum iwl_ucode_type old_type = mvm->fwrt.cur_fw_img;
> 319 static const u16 alive_cmd[] = { UCODE_ALIVE_NTFY };
> 320 bool run_in_rfkill =
> 321 ucode_type == IWL_UCODE_INIT || iwl_mvm_has_unified_ucode(mvm);
> 322
> 323 if (ucode_type == IWL_UCODE_REGULAR &&
> 324 iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE) &&
> 325 !(fw_has_capa(&mvm->fw->ucode_capa,
> 326 IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED)))
> 327 fw = iwl_get_ucode_image(mvm->fw, IWL_UCODE_REGULAR_USNIFFER);
> 328 else
> 329 fw = iwl_get_ucode_image(mvm->fw, ucode_type);
> 330 if (WARN_ON(!fw))
> 331 return -EINVAL;
> 332 iwl_fw_set_current_image(&mvm->fwrt, ucode_type);
> 333 clear_bit(IWL_MVM_STATUS_FIRMWARE_RUNNING, &mvm->status);
> 334
> 335 iwl_init_notification_wait(&mvm->notif_wait, &alive_wait,
> 336 alive_cmd, ARRAY_SIZE(alive_cmd),
> 337 iwl_alive_fn, &alive_data);
> 338
> 339 /*
> 340 * We want to load the INIT firmware even in RFKILL
> 341 * For the unified firmware case, the ucode_type is not
> 342 * INIT, but we still need to run it.
> 343 */
> 344 ret = iwl_trans_start_fw(mvm->trans, fw, run_in_rfkill);
> 345 if (ret) {
> 346 iwl_fw_set_current_image(&mvm->fwrt, old_type);
> 347 iwl_remove_notification(&mvm->notif_wait, &alive_wait);
> 348 return ret;
> 349 }
> 350
> 351 /*
> 352 * Some things may run in the background now, but we
> 353 * just wait for the ALIVE notification here.
> 354 */
> 355 ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait,
> 356 MVM_UCODE_ALIVE_TIMEOUT);
> 357 if (ret) {
> 358 struct iwl_trans *trans = mvm->trans;
> 359
> 360 /* SecBoot info */
> 361 if (trans->trans_cfg->device_family >=
> 362 IWL_DEVICE_FAMILY_22000) {
> 363 IWL_ERR(mvm,
> 364 "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n",
> 365 iwl_read_umac_prph(trans, UMAG_SB_CPU_1_STATUS),
> 366 iwl_read_umac_prph(trans,
> 367 UMAG_SB_CPU_2_STATUS));
> 368 } else if (trans->trans_cfg->device_family >=
> 369 IWL_DEVICE_FAMILY_8000) {
> 370 IWL_ERR(mvm,
> 371 "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n",
> 372 iwl_read_prph(trans, SB_CPU_1_STATUS),
> 373 iwl_read_prph(trans, SB_CPU_2_STATUS));
> 374 }
> 375
> 376 iwl_mvm_print_pd_notification(mvm);
> 377
> 378 /* LMAC/UMAC PC info */
> 379 if (trans->trans_cfg->device_family >=
> 380 IWL_DEVICE_FAMILY_9000) {
> 381 IWL_ERR(mvm, "UMAC PC: 0x%x\n",
> 382 iwl_read_umac_prph(trans,
> 383 UREG_UMAC_CURRENT_PC));
> 384 IWL_ERR(mvm, "LMAC PC: 0x%x\n",
> 385 iwl_read_umac_prph(trans,
> 386 UREG_LMAC1_CURRENT_PC));
> 387 if (iwl_mvm_is_cdb_supported(mvm))
> 388 IWL_ERR(mvm, "LMAC2 PC: 0x%x\n",
> 389 iwl_read_umac_prph(trans,
> 390 UREG_LMAC2_CURRENT_PC));
> 391 }
> 392
> 393 if (ret == -ETIMEDOUT)
> 394 iwl_fw_dbg_error_collect(&mvm->fwrt,
> 395 FW_DBG_TRIGGER_ALIVE_TIMEOUT);
> 396
> 397 iwl_fw_set_current_image(&mvm->fwrt, old_type);
> 398 return ret;
> ^^^^^^^^^^^
>
> 399 }
> 400
> 401 if (!alive_data.valid) {
> 402 IWL_ERR(mvm, "Loaded ucode is not valid!\n");
> 403 iwl_fw_set_current_image(&mvm->fwrt, old_type);
> 404 return -EIO;
> 405 }
> 406
> --> 407 iwl_mei_alive_notif(!ret);
>
> We know that "ret" is zero.
>
> 408
> 409 ret = iwl_pnvm_load(mvm->trans, &mvm->notif_wait);
> 410 if (ret) {
>
> [ snip ]
>
> 1455 int iwl_mvm_up(struct iwl_mvm *mvm)
> 1456 {
> 1457 int ret, i;
> 1458 struct ieee80211_channel *chan;
> 1459 struct cfg80211_chan_def chandef;
> 1460 struct ieee80211_supported_band *sband = NULL;
> 1461 u32 sb_cfg;
> 1462
> 1463 lockdep_assert_held(&mvm->mutex);
> 1464
> 1465 ret = iwl_trans_start_hw(mvm->trans);
> 1466 if (ret)
> 1467 return ret;
> 1468
> 1469 sb_cfg = iwl_read_umac_prph(mvm->trans, SB_MODIFY_CFG_FLAG);
> 1470 if (!(sb_cfg & SB_CFG_RESIDES_IN_OTP_MASK) && iwl_mei_pldr_req())
> 1471 return ret;
>
> Probably return -EINVAL was intended. (This code actually inspired me
> to create this static checker warning. ;) So it hasn't been tested yet.
> Will test tonight. Gotta run though...)
>
> 1472
> 1473 ret = iwl_mvm_load_rt_fw(mvm);
> 1474 if (ret) {
>
> regards,
> dan carpenter
We have a fix in our internal tree, will send it this week.
Thanks,
Gregory
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-11-21 16:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-21 15:25 [bug report] wifi: iwlwifi: mei: implement PLDR flow Dan Carpenter
2022-11-21 16:40 ` Greenman, Gregory
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.