* [PATCH 1/2] mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error
@ 2021-12-24 8:33 ` sean.wang
0 siblings, 0 replies; 4+ messages in thread
From: sean.wang @ 2021-12-24 8:33 UTC (permalink / raw)
To: nbd, lorenzo.bianconi
Cc: sean.wang, Soul.Huang, YN.Chen, Leon.Yen, Eric-SY.Chang,
Mark-YW.Chen, Deren.Wu, km.lin, jenhao.yang, robin.chiu,
Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang,
Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele,
abhishekpandit, shawnku, linux-wireless, linux-mediatek
From: Sean Wang <sean.wang@mediatek.com>
Fixed an MCU_CE_CMD_SET_ROC definition error that occurred from a previous
refactor work.
Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index fc9a08436d43..0f4a9d2edb5c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -997,7 +997,7 @@ enum {
MCU_CE_CMD_SET_BSS_CONNECTED = 0x16,
MCU_CE_CMD_SET_BSS_ABORT = 0x17,
MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b,
- MCU_CE_CMD_SET_ROC = 0x1d,
+ MCU_CE_CMD_SET_ROC = 0x1c,
MCU_CE_CMD_SET_P2P_OPPPS = 0x33,
MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d,
MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61,
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 1/2] mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error @ 2021-12-24 8:33 ` sean.wang 0 siblings, 0 replies; 4+ messages in thread From: sean.wang @ 2021-12-24 8:33 UTC (permalink / raw) To: nbd, lorenzo.bianconi Cc: sean.wang, Soul.Huang, YN.Chen, Leon.Yen, Eric-SY.Chang, Mark-YW.Chen, Deren.Wu, km.lin, jenhao.yang, robin.chiu, Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang, Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele, abhishekpandit, shawnku, linux-wireless, linux-mediatek From: Sean Wang <sean.wang@mediatek.com> Fixed an MCU_CE_CMD_SET_ROC definition error that occurred from a previous refactor work. Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h index fc9a08436d43..0f4a9d2edb5c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h @@ -997,7 +997,7 @@ enum { MCU_CE_CMD_SET_BSS_CONNECTED = 0x16, MCU_CE_CMD_SET_BSS_ABORT = 0x17, MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b, - MCU_CE_CMD_SET_ROC = 0x1d, + MCU_CE_CMD_SET_ROC = 0x1c, MCU_CE_CMD_SET_P2P_OPPPS = 0x33, MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d, MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61, -- 2.25.1 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] mt76: mt7921: set EDCA parameters with the MCU CE command 2021-12-24 8:33 ` sean.wang @ 2021-12-24 8:33 ` sean.wang -1 siblings, 0 replies; 4+ messages in thread From: sean.wang @ 2021-12-24 8:33 UTC (permalink / raw) To: nbd, lorenzo.bianconi Cc: sean.wang, Soul.Huang, YN.Chen, Leon.Yen, Eric-SY.Chang, Mark-YW.Chen, Deren.Wu, km.lin, jenhao.yang, robin.chiu, Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang, Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele, abhishekpandit, shawnku, linux-wireless, linux-mediatek From: Sean Wang <sean.wang@mediatek.com> The command MCU_EXT_CMD_EDCA_UPDATE is not fully supported by the MT7921 firmware, so we apply CE command MCU_CE_CMD_SET_EDCA_PARAMS instead which is supported even in the oldest firmware to properly set up EDCA parameters for each AC. Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- .../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 + .../net/wireless/mediatek/mt76/mt7921/mcu.c | 49 ++++++++----------- 2 files changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h index 0f4a9d2edb5c..ceb0784be395 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h @@ -998,6 +998,7 @@ enum { MCU_CE_CMD_SET_BSS_ABORT = 0x17, MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b, MCU_CE_CMD_SET_ROC = 0x1c, + MCU_CE_CMD_SET_EDCA_PARMS = 0x1d, MCU_CE_CMD_SET_P2P_OPPPS = 0x33, MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d, MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61, diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index d014e574ce6a..ba8a91d56b6a 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -785,33 +785,28 @@ EXPORT_SYMBOL_GPL(mt7921_mcu_exit); int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) { -#define WMM_AIFS_SET BIT(0) -#define WMM_CW_MIN_SET BIT(1) -#define WMM_CW_MAX_SET BIT(2) -#define WMM_TXOP_SET BIT(3) -#define WMM_PARAM_SET GENMASK(3, 0) -#define TX_CMD_MODE 1 + struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct edca { - u8 queue; - u8 set; - u8 aifs; - u8 cw_min; + __le16 cw_min; __le16 cw_max; __le16 txop; - }; + __le16 aifs; + u8 guardtime; + u8 acm; + } __packed; struct mt7921_mcu_tx { - u8 total; - u8 action; - u8 valid; - u8 mode; - struct edca edca[IEEE80211_NUM_ACS]; + u8 bss_idx; + u8 qos; + u8 wmm_idx; + u8 pad; } __packed req = { - .valid = true, - .mode = TX_CMD_MODE, - .total = IEEE80211_NUM_ACS, + .bss_idx = mvif->mt76.idx, + .qos = vif->bss_conf.qos, + .wmm_idx = mvif->mt76.wmm_idx, }; - struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct mu_edca { u8 cw_min; u8 cw_max; @@ -835,30 +830,29 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) .qos = vif->bss_conf.qos, .wmm_idx = mvif->mt76.wmm_idx, }; + int to_aci[] = {1, 0, 2, 3}; int ac, ret; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac]; - struct edca *e = &req.edca[ac]; + struct edca *e = &req.edca[to_aci[ac]]; - e->set = WMM_PARAM_SET; - e->queue = ac + mvif->mt76.wmm_idx * MT7921_MAX_WMM_SETS; e->aifs = q->aifs; e->txop = cpu_to_le16(q->txop); if (q->cw_min) - e->cw_min = fls(q->cw_min); + e->cw_min = cpu_to_le16(q->cw_min); else e->cw_min = 5; if (q->cw_max) - e->cw_max = cpu_to_le16(fls(q->cw_max)); + e->cw_max = cpu_to_le16(q->cw_max); else e->cw_max = cpu_to_le16(10); } - ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(EDCA_UPDATE), - &req, sizeof(req), true); + ret = mt76_mcu_send_msg(&dev->mt76, MCU_CE_CMD(SET_EDCA_PARMS), &req, + sizeof(req), false); if (ret) return ret; @@ -868,7 +862,6 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_he_mu_edca_param_ac_rec *q; struct mu_edca *e; - int to_aci[] = {1, 0, 2, 3}; if (!mvif->queue_params[ac].mu_edca) break; -- 2.25.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] mt76: mt7921: set EDCA parameters with the MCU CE command @ 2021-12-24 8:33 ` sean.wang 0 siblings, 0 replies; 4+ messages in thread From: sean.wang @ 2021-12-24 8:33 UTC (permalink / raw) To: nbd, lorenzo.bianconi Cc: sean.wang, Soul.Huang, YN.Chen, Leon.Yen, Eric-SY.Chang, Mark-YW.Chen, Deren.Wu, km.lin, jenhao.yang, robin.chiu, Eddie.Chen, ch.yeh, posh.sun, ted.huang, Eric.Liang, Stella.Chang, Tom.Chou, steve.lee, jsiuda, frankgor, jemele, abhishekpandit, shawnku, linux-wireless, linux-mediatek From: Sean Wang <sean.wang@mediatek.com> The command MCU_EXT_CMD_EDCA_UPDATE is not fully supported by the MT7921 firmware, so we apply CE command MCU_CE_CMD_SET_EDCA_PARAMS instead which is supported even in the oldest firmware to properly set up EDCA parameters for each AC. Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- .../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 + .../net/wireless/mediatek/mt76/mt7921/mcu.c | 49 ++++++++----------- 2 files changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h index 0f4a9d2edb5c..ceb0784be395 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h @@ -998,6 +998,7 @@ enum { MCU_CE_CMD_SET_BSS_ABORT = 0x17, MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b, MCU_CE_CMD_SET_ROC = 0x1c, + MCU_CE_CMD_SET_EDCA_PARMS = 0x1d, MCU_CE_CMD_SET_P2P_OPPPS = 0x33, MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d, MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61, diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index d014e574ce6a..ba8a91d56b6a 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -785,33 +785,28 @@ EXPORT_SYMBOL_GPL(mt7921_mcu_exit); int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) { -#define WMM_AIFS_SET BIT(0) -#define WMM_CW_MIN_SET BIT(1) -#define WMM_CW_MAX_SET BIT(2) -#define WMM_TXOP_SET BIT(3) -#define WMM_PARAM_SET GENMASK(3, 0) -#define TX_CMD_MODE 1 + struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct edca { - u8 queue; - u8 set; - u8 aifs; - u8 cw_min; + __le16 cw_min; __le16 cw_max; __le16 txop; - }; + __le16 aifs; + u8 guardtime; + u8 acm; + } __packed; struct mt7921_mcu_tx { - u8 total; - u8 action; - u8 valid; - u8 mode; - struct edca edca[IEEE80211_NUM_ACS]; + u8 bss_idx; + u8 qos; + u8 wmm_idx; + u8 pad; } __packed req = { - .valid = true, - .mode = TX_CMD_MODE, - .total = IEEE80211_NUM_ACS, + .bss_idx = mvif->mt76.idx, + .qos = vif->bss_conf.qos, + .wmm_idx = mvif->mt76.wmm_idx, }; - struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct mu_edca { u8 cw_min; u8 cw_max; @@ -835,30 +830,29 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) .qos = vif->bss_conf.qos, .wmm_idx = mvif->mt76.wmm_idx, }; + int to_aci[] = {1, 0, 2, 3}; int ac, ret; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac]; - struct edca *e = &req.edca[ac]; + struct edca *e = &req.edca[to_aci[ac]]; - e->set = WMM_PARAM_SET; - e->queue = ac + mvif->mt76.wmm_idx * MT7921_MAX_WMM_SETS; e->aifs = q->aifs; e->txop = cpu_to_le16(q->txop); if (q->cw_min) - e->cw_min = fls(q->cw_min); + e->cw_min = cpu_to_le16(q->cw_min); else e->cw_min = 5; if (q->cw_max) - e->cw_max = cpu_to_le16(fls(q->cw_max)); + e->cw_max = cpu_to_le16(q->cw_max); else e->cw_max = cpu_to_le16(10); } - ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(EDCA_UPDATE), - &req, sizeof(req), true); + ret = mt76_mcu_send_msg(&dev->mt76, MCU_CE_CMD(SET_EDCA_PARMS), &req, + sizeof(req), false); if (ret) return ret; @@ -868,7 +862,6 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_he_mu_edca_param_ac_rec *q; struct mu_edca *e; - int to_aci[] = {1, 0, 2, 3}; if (!mvif->queue_params[ac].mu_edca) break; -- 2.25.1 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-12-24 8:44 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-12-24 8:33 [PATCH 1/2] mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error sean.wang 2021-12-24 8:33 ` sean.wang 2021-12-24 8:33 ` [PATCH 2/2] mt76: mt7921: set EDCA parameters with the MCU CE command sean.wang 2021-12-24 8:33 ` sean.wang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.