* Re: usb: dwc3: gadget: Fix logical condition
@ 2019-12-25 17:32 youling 257
2019-12-26 5:48 ` Tejas Joglekar
0 siblings, 1 reply; 2+ messages in thread
From: youling 257 @ 2019-12-25 17:32 UTC (permalink / raw)
To: Tejas.Joglekar; +Cc: joglekar, gregkh, stable
This patch caused g_mass_storage not working.
with this patch, device modprobe g_mass_storage file=/dev/block/mmcblk2p3,
[ 255.255238] udc dwc3.3.auto: registering UDC driver [g_mass_storage]
[ 255.255266] Mass Storage Function, version: 2009/09/11
[ 255.255362] LUN: removable file: (no medium)
[ 255.255533] lun0: open backing file: /dev/block/mmcblk2p3
[ 255.255539] LUN: file: /dev/block/mmcblk2p3
[ 255.255587] Number of LUNs=1
[ 255.255675] g_mass_storage gadget: adding config #1 'Linux
File-Backed Storage'/0000000034b331d2
[ 255.255681] g_mass_storage gadget: adding 'Mass Storage
Function'/000000009839a369 to config 'Linux File-Backed
Storage'/0000000034b331d2
[ 255.256338] g_mass_storage gadget: I/O thread pid: 6312
[ 255.256396] g_mass_storage gadget: cfg 1/0000000034b331d2 speeds:
super high full
[ 255.256401] g_mass_storage gadget: interface 0 = Mass Storage
Function/000000009839a369
[ 255.256411] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[ 255.256464] g_mass_storage gadget: userspace failed to provide iSerialNumber
[ 255.256548] g_mass_storage gadget: g_mass_storage ready
[ 255.313503] init: Starting service 'wpa_supplicant'...
[ 255.355209] g_mass_storage gadget: suspend
[ 255.384831] init: Service 'wpa_supplicant' (pid 6314) exited with status 255
[ 255.384891] init: Service 'wpa_supplicant' (pid 6314) killing any
children in process group
[ 255.662885] g_mass_storage gadget: high-speed config #1: Linux
File-Backed Storage
[ 255.663081] g_mass_storage gadget: set_config: interface 0 (Mass
Storage Function) requested delayed status
[ 255.663089] g_mass_storage gadget: delayed_status count 1
[ 255.663732] g_mass_storage gadget: usb_composite_setup_continue
[ 255.663743] g_mass_storage gadget: usb_composite_setup_continue:
Completing delayed status
[ 256.681607] g_mass_storage gadget: non-core control reqa1.fe v0000 i0000 l1
[ 256.681613] g_mass_storage gadget: get max LUN
host not detect sda,
[49728.458139] usb 1-2.3: new high-speed USB device number 21 using xhci_hcd
[49728.544776] usb-storage 1-2.3:1.0: USB Mass Storage device detected
[49728.545875]
usb-storage 1-2.3:1.0: Quirks match for vid 0525 pid a4a5: 10000
[49728.546062] scsi host0: usb-storage 1-2.3:1.0
revert this patch, device modprobe g_mass_storage file=/dev/block/mmcblk2p3
[ 405.766178] udc dwc3.3.auto: registering UDC driver [g_mass_storage]
[ 405.766225] Mass Storage Function, version: 2009/09/11
[ 405.766307] LUN: removable file: (no medium)
[ 405.766532] lun0: open backing file: /dev/block/mmcblk2p3
[ 405.766539] LUN: file: /dev/block/mmcblk2p3
[ 405.766665] Number of LUNs=1
[ 405.766736] g_mass_storage gadget: adding config #1 'Linux
File-Backed Storage'/0000000034b331d2
[ 405.766747] g_mass_storage gadget: adding 'Mass Storage
Function'/00000000cbbcccdc to config 'Linux File-Backed
Storage'/0000000034b331d2
[ 405.767498] g_mass_storage gadget: I/O thread pid: 6873
[ 405.767509] g_mass_storage gadget: cfg 1/0000000034b331d2 speeds:
super high full
[ 405.767512] g_mass_storage gadget: interface 0 = Mass Storage
Function/00000000cbbcccdc
[ 405.767519] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[ 405.767587] g_mass_storage gadget: userspace failed to provide iSerialNumber
[ 405.767622] g_mass_storage gadget: g_mass_storage ready
[ 405.866215] g_mass_storage gadget: suspend
[ 406.175951] g_mass_storage gadget: high-speed config #1: Linux
File-Backed Storage
[ 406.176130] g_mass_storage gadget: set_config: interface 0 (Mass
Storage Function) requested delayed status
[ 406.176138] g_mass_storage gadget: delayed_status count 1
[ 406.176186] g_mass_storage gadget: usb_composite_setup_continue
[ 406.176211] g_mass_storage gadget: usb_composite_setup_continue:
Completing delayed status
[ 407.202507] g_mass_storage gadget: non-core control reqa1.fe v0000 i0000 l1
[ 407.202512] g_mass_storage gadget: get max LUN
[ 407.203164] SCSI CDB: 12 00 00 00 24 00
[ 407.203177] g_mass_storage gadget: SCSI command: INQUIRY; Dc=6,
Di=36; Hc=6, Hi=36
[ 407.205991] SCSI CDB: 00 00 00 00 00 00
[ 407.206005] g_mass_storage gadget: SCSI command: TEST UNIT READY;
Dc=6, Dn=0; Hc=6, Hn=0
[ 407.206008] g_mass_storage gadget: sending command-failure status
[ 407.206012] g_mass_storage gadget: sense data: SK x06, ASC x29,
ASCQ x00; info x0
[ 407.206279] SCSI CDB: 03 00 00 00 12 00
[ 407.206287] g_mass_storage gadget: SCSI command: REQUEST SENSE;
Dc=6, Di=18; Hc=6, Hi=18
[ 407.207342] SCSI CDB: 00 00 00 00 00 00
[ 407.207354] g_mass_storage gadget: SCSI command: TEST UNIT READY;
Dc=6, Dn=0; Hc=6, Hn=0
[ 407.207633] SCSI CDB: 25 00 00 00 00 00 00 00 00 00
[ 407.207641] g_mass_storage gadget: SCSI command: READ CAPACITY;
Dc=10, Di=8; Hc=10, Hi=8
[ 407.208755] SCSI CDB: 1a 00 3f 00 c0 00
[ 407.208766] g_mass_storage gadget: SCSI command: MODE SENSE(6);
Dc=6, Di=192; Hc=6, Hi=192
[ 407.208779] g_mass_storage gadget: bulk-in set halt
[ 407.208782] g_mass_storage gadget: delayed bulk-in endpoint halt
[ 407.320644] SCSI CDB: 1a 00 3f 00 c0 00
[ 407.320662] g_mass_storage gadget: SCSI command: MODE SENSE(6);
Dc=6, Di=192; Hc=6, Hi=192
[ 407.320674] g_mass_storage gadget: bulk-in set halt
[ 407.320676] g_mass_storage gadget: delayed bulk-in endpoint halt
[ 407.440335] SCSI CDB: 00 00 00 00 00 00
host can detect sda,
[49878.915966] usb 1-2.3: new high-speed USB device number 23 using xhci_hcd
[49878.999260] usb-storage 1-2.3:1.0: USB Mass Storage device detected
[49879.001165]
usb-storage 1-2.3:1.0: Quirks match for vid 0525 pid a4a5: 10000
[49879.001676] scsi host0: usb-storage 1-2.3:1.0
[49880.026002] scsi
0:0:0:0: Direct-Access Linux File-Stor Gadget 0503 PQ: 0 ANSI:
2
[49880.027243] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[49880.028852] sd
0:0:0:0: Power-on or device reset occurred
[49880.030081] sd 0:0:0:0: [sda] 10485760 512-byte logical blocks:
(5.37 GB/5.00 GiB)
[49880.142046] sd
0:0:0:0: [sda] Write Protect is off
[49880.142186] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[49880.253720] sd
0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
[49880.500337] audit: type=1400 audit(1577294060.839:15853): avc:
denied { noatsecure } for pid=9278 comm="sh" scontext=u:r:vold:s0
tcontext=u:r:sgdisk:s0 tclass=process permissive=1 [49880.596496]
sd 0:0:0:0: [sda] Attached SCSI disk
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: usb: dwc3: gadget: Fix logical condition
2019-12-25 17:32 usb: dwc3: gadget: Fix logical condition youling 257
@ 2019-12-26 5:48 ` Tejas Joglekar
0 siblings, 0 replies; 2+ messages in thread
From: Tejas Joglekar @ 2019-12-26 5:48 UTC (permalink / raw)
To: youling 257, Tejas Joglekar; +Cc: gregkh, stable
Hi,
On 12/25/2019 11:02 PM, youling 257 wrote:
> This patch caused g_mass_storage not working.
>
> with this patch, device modprobe g_mass_storage file=/dev/block/mmcblk2p3,
> [ 255.255238] udc dwc3.3.auto: registering UDC driver [g_mass_storage]
> [ 255.255266] Mass Storage Function, version: 2009/09/11
> [ 255.255362] LUN: removable file: (no medium)
> [ 255.255533] lun0: open backing file: /dev/block/mmcblk2p3
> [ 255.255539] LUN: file: /dev/block/mmcblk2p3
> [ 255.255587] Number of LUNs=1
> [ 255.255675] g_mass_storage gadget: adding config #1 'Linux
> File-Backed Storage'/0000000034b331d2
> [ 255.255681] g_mass_storage gadget: adding 'Mass Storage
> Function'/000000009839a369 to config 'Linux File-Backed
> Storage'/0000000034b331d2
> [ 255.256338] g_mass_storage gadget: I/O thread pid: 6312
> [ 255.256396] g_mass_storage gadget: cfg 1/0000000034b331d2 speeds:
> super high full
> [ 255.256401] g_mass_storage gadget: interface 0 = Mass Storage
> Function/000000009839a369
> [ 255.256411] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
> [ 255.256464] g_mass_storage gadget: userspace failed to provide iSerialNumber
> [ 255.256548] g_mass_storage gadget: g_mass_storage ready
> [ 255.313503] init: Starting service 'wpa_supplicant'...
> [ 255.355209] g_mass_storage gadget: suspend
> [ 255.384831] init: Service 'wpa_supplicant' (pid 6314) exited with status 255
> [ 255.384891] init: Service 'wpa_supplicant' (pid 6314) killing any
> children in process group
> [ 255.662885] g_mass_storage gadget: high-speed config #1: Linux
> File-Backed Storage
> [ 255.663081] g_mass_storage gadget: set_config: interface 0 (Mass
> Storage Function) requested delayed status
> [ 255.663089] g_mass_storage gadget: delayed_status count 1
> [ 255.663732] g_mass_storage gadget: usb_composite_setup_continue
> [ 255.663743] g_mass_storage gadget: usb_composite_setup_continue:
> Completing delayed status
> [ 256.681607] g_mass_storage gadget: non-core control reqa1.fe v0000 i0000 l1
> [ 256.681613] g_mass_storage gadget: get max LUN
>
> host not detect sda,
> [49728.458139] usb 1-2.3: new high-speed USB device number 21 using xhci_hcd
> [49728.544776] usb-storage 1-2.3:1.0: USB Mass Storage device detected
>
> [49728.545875]
> usb-storage 1-2.3:1.0: Quirks match for vid 0525 pid a4a5: 10000
> [49728.546062] scsi host0: usb-storage 1-2.3:1.0
>
>
> revert this patch, device modprobe g_mass_storage file=/dev/block/mmcblk2p3
> [ 405.766178] udc dwc3.3.auto: registering UDC driver [g_mass_storage]
> [ 405.766225] Mass Storage Function, version: 2009/09/11
> [ 405.766307] LUN: removable file: (no medium)
> [ 405.766532] lun0: open backing file: /dev/block/mmcblk2p3
> [ 405.766539] LUN: file: /dev/block/mmcblk2p3
> [ 405.766665] Number of LUNs=1
> [ 405.766736] g_mass_storage gadget: adding config #1 'Linux
> File-Backed Storage'/0000000034b331d2
> [ 405.766747] g_mass_storage gadget: adding 'Mass Storage
> Function'/00000000cbbcccdc to config 'Linux File-Backed
> Storage'/0000000034b331d2
> [ 405.767498] g_mass_storage gadget: I/O thread pid: 6873
> [ 405.767509] g_mass_storage gadget: cfg 1/0000000034b331d2 speeds:
> super high full
> [ 405.767512] g_mass_storage gadget: interface 0 = Mass Storage
> Function/00000000cbbcccdc
> [ 405.767519] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
> [ 405.767587] g_mass_storage gadget: userspace failed to provide iSerialNumber
> [ 405.767622] g_mass_storage gadget: g_mass_storage ready
> [ 405.866215] g_mass_storage gadget: suspend
> [ 406.175951] g_mass_storage gadget: high-speed config #1: Linux
> File-Backed Storage
> [ 406.176130] g_mass_storage gadget: set_config: interface 0 (Mass
> Storage Function) requested delayed status
> [ 406.176138] g_mass_storage gadget: delayed_status count 1
> [ 406.176186] g_mass_storage gadget: usb_composite_setup_continue
> [ 406.176211] g_mass_storage gadget: usb_composite_setup_continue:
> Completing delayed status
> [ 407.202507] g_mass_storage gadget: non-core control reqa1.fe v0000 i0000 l1
> [ 407.202512] g_mass_storage gadget: get max LUN
> [ 407.203164] SCSI CDB: 12 00 00 00 24 00
> [ 407.203177] g_mass_storage gadget: SCSI command: INQUIRY; Dc=6,
> Di=36; Hc=6, Hi=36
> [ 407.205991] SCSI CDB: 00 00 00 00 00 00
> [ 407.206005] g_mass_storage gadget: SCSI command: TEST UNIT READY;
> Dc=6, Dn=0; Hc=6, Hn=0
> [ 407.206008] g_mass_storage gadget: sending command-failure status
> [ 407.206012] g_mass_storage gadget: sense data: SK x06, ASC x29,
> ASCQ x00; info x0
> [ 407.206279] SCSI CDB: 03 00 00 00 12 00
> [ 407.206287] g_mass_storage gadget: SCSI command: REQUEST SENSE;
> Dc=6, Di=18; Hc=6, Hi=18
> [ 407.207342] SCSI CDB: 00 00 00 00 00 00
> [ 407.207354] g_mass_storage gadget: SCSI command: TEST UNIT READY;
> Dc=6, Dn=0; Hc=6, Hn=0
> [ 407.207633] SCSI CDB: 25 00 00 00 00 00 00 00 00 00
> [ 407.207641] g_mass_storage gadget: SCSI command: READ CAPACITY;
> Dc=10, Di=8; Hc=10, Hi=8
> [ 407.208755] SCSI CDB: 1a 00 3f 00 c0 00
> [ 407.208766] g_mass_storage gadget: SCSI command: MODE SENSE(6);
> Dc=6, Di=192; Hc=6, Hi=192
> [ 407.208779] g_mass_storage gadget: bulk-in set halt
> [ 407.208782] g_mass_storage gadget: delayed bulk-in endpoint halt
> [ 407.320644] SCSI CDB: 1a 00 3f 00 c0 00
> [ 407.320662] g_mass_storage gadget: SCSI command: MODE SENSE(6);
> Dc=6, Di=192; Hc=6, Hi=192
> [ 407.320674] g_mass_storage gadget: bulk-in set halt
> [ 407.320676] g_mass_storage gadget: delayed bulk-in endpoint halt
> [ 407.440335] SCSI CDB: 00 00 00 00 00 00
>
> host can detect sda,
> [49878.915966] usb 1-2.3: new high-speed USB device number 23 using xhci_hcd
> [49878.999260] usb-storage 1-2.3:1.0: USB Mass Storage device detected
>
> [49879.001165]
> usb-storage 1-2.3:1.0: Quirks match for vid 0525 pid a4a5: 10000
> [49879.001676] scsi host0: usb-storage 1-2.3:1.0
>
> [49880.026002] scsi
> 0:0:0:0: Direct-Access Linux File-Stor Gadget 0503 PQ: 0 ANSI:
> 2
> [49880.027243] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>
> [49880.028852] sd
> 0:0:0:0: Power-on or device reset occurred
> [49880.030081] sd 0:0:0:0: [sda] 10485760 512-byte logical blocks:
> (5.37 GB/5.00 GiB)
> [49880.142046] sd
> 0:0:0:0: [sda] Write Protect is off
> [49880.142186] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
>
> [49880.253720] sd
> 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> [49880.500337] audit: type=1400 audit(1577294060.839:15853): avc:
> denied { noatsecure } for pid=9278 comm="sh" scontext=u:r:vold:s0
> tcontext=u:r:sgdisk:s0 tclass=process permissive=1 [49880.596496]
> sd 0:0:0:0: [sda] Attached SCSI disk
>
We need https://patchwork.kernel.org/patch/11292087/ fix for usb: dwc3: gadget: simplify IOC handling patch to make g_mass_storage to work.
Thanks & Regards,
Tejas Joglekar
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-26 5:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-25 17:32 usb: dwc3: gadget: Fix logical condition youling 257
2019-12-26 5:48 ` Tejas Joglekar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.