[PATCH v3 0/6] block: add block-dirty-bitmap-populate job

[PATCH v3 0/6] block: add block-dirty-bitmap-populate job

[Eric Blake]

[From John's original cover letter:]
This is a new (very small) block job that writes a pattern into a
bitmap. The only pattern implemented is the top allocation information.

This can be used to "recover" an incremental bitmap chain if an external
snapshot was taken without creating a new bitmap first: any writes made
to the image will be reflected by the allocation status and can be
written back into a bitmap.

This is useful for e.g. libvirt managing backup chains if a user creates
an external snapshot outside of libvirt.

v3:
 - Addressed a bit more feedback
 - Make it easier to decide if we want an x- prefix if we think there
 are more tweaks to be made to the interface
 - Drop dependency on John's JobRunner iotest series
 - Renumber the new iotest

I know there was a lot of discussion about whether there are
optimizations to be made with populating directly into the target
bitmap rather than into a temporary that then gets merged in at the
completion of the job, but the QMP aspect seems fairly stable.  Even
so, we may still want to consider using an x- prefix until we know for
sure whether libvirt can make decent use of the interface.

Eric Blake (1):
  bitmaps: Use x- prefix for block-dirty-bitmap-popluate

John Snow (5):
  block: add bitmap-populate job
  blockdev: combine DriveBackupState and BlockdevBackupState
  qmp: expose block-dirty-bitmap-populate
  iotests: move bitmap helpers into their own file
  iotests: add 298 for block-dirty-bitmap-populate

 qapi/block-core.json          |   66 +
 qapi/job.json                 |    6 +-
 qapi/transaction.json         |    2 +
 include/block/block_int.h     |   21 +
 block/bitmap-populate.c       |  207 ++
 blockdev.c                    |  104 +-
 blockjob.c                    |    3 +-
 MAINTAINERS                   |    1 +
 block/Makefile.objs           |    1 +
 tests/qemu-iotests/257        |  110 +-
 tests/qemu-iotests/298        |  232 ++
 tests/qemu-iotests/298.out    | 4544 +++++++++++++++++++++++++++++++++
 tests/qemu-iotests/bitmaps.py |  131 +
 tests/qemu-iotests/group      |    1 +
 14 files changed, 5300 insertions(+), 129 deletions(-)
 create mode 100644 block/bitmap-populate.c
 create mode 100755 tests/qemu-iotests/298
 create mode 100644 tests/qemu-iotests/298.out
 create mode 100644 tests/qemu-iotests/bitmaps.py

-- 
2.27.0

[PATCH v3 1/6] block: add bitmap-populate job

[Eric Blake]

From: John Snow <jsnow@redhat.com>

This job copies the allocation map into a bitmap. It's a job because
there's no guarantee that allocation interrogation will be quick (or
won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.

It was designed with different possible population patterns in mind,
but only top layer allocation was implemented for now.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
 qapi/block-core.json      |  48 +++++++++
 qapi/job.json             |   6 +-
 include/block/block_int.h |  21 ++++
 block/bitmap-populate.c   | 207 ++++++++++++++++++++++++++++++++++++++
 blockjob.c                |   3 +-
 MAINTAINERS               |   1 +
 block/Makefile.objs       |   1 +
 7 files changed, 285 insertions(+), 2 deletions(-)
 create mode 100644 block/bitmap-populate.c

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 0e1c6a59f228..a1bcdba04423 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2211,6 +2211,54 @@
       { 'command': 'block-dirty-bitmap-merge',
         'data': 'BlockDirtyBitmapMerge' }

+##
+# @BitmapPattern:
+#
+# An enumeration of possible patterns that can be written into a bitmap.
+#
+# @allocation-top: The allocation status of the top layer
+#                  of the attached storage node.
+#
+# Since: 5.1
+##
+{ 'enum': 'BitmapPattern',
+  'data': ['allocation-top'] }
+
+##
+# @BlockDirtyBitmapPopulate:
+#
+# @job-id: identifier for the newly-created block job.
+#
+# @pattern: What pattern should be written into the bitmap?
+#
+# @on-error: the action to take if an error is encountered on a bitmap's
+#            attached node, default 'report'.
+#            'stop' and 'enospc' can only be used if the block device supports
+#            io-status (see BlockInfo).
+#
+# @auto-finalize: When false, this job will wait in a PENDING state after it has
+#                 finished its work, waiting for @block-job-finalize before
+#                 making any block graph changes.
+#                 When true, this job will automatically
+#                 perform its abort or commit actions.
+#                 Defaults to true.
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
+#                has completely ceased all work, and awaits @block-job-dismiss.
+#                When true, this job will automatically disappear from the query
+#                list without user intervention.
+#                Defaults to true.
+#
+# Since: 5.1
+##
+{ 'struct': 'BlockDirtyBitmapPopulate',
+  'base': 'BlockDirtyBitmap',
+  'data': { 'job-id': 'str',
+            'pattern': 'BitmapPattern',
+            '*on-error': 'BlockdevOnError',
+            '*auto-finalize': 'bool',
+            '*auto-dismiss': 'bool' } }
+
 ##
 # @BlockDirtyBitmapSha256:
 #
diff --git a/qapi/job.json b/qapi/job.json
index 5e658281f5c4..33ff3500f794 100644
--- a/qapi/job.json
+++ b/qapi/job.json
@@ -19,10 +19,14 @@
 #
 # @create: image creation job type, see "blockdev-create" (since 3.0)
 #
+# @bitmap-populate: drive bitmap population job type, see
+#                   "block-dirty-bitmap-populate" (since 5.1)
+#
 # Since: 1.7
 ##
 { 'enum': 'JobType',
-  'data': ['commit', 'stream', 'mirror', 'backup', 'create'] }
+  'data': ['commit', 'stream', 'mirror', 'backup', 'create',
+           'bitmap-populate'] }

 ##
 # @JobStatus:
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 791de6a59c2c..93fb886e7e97 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -1231,6 +1231,27 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
                             BlockCompletionFunc *cb, void *opaque,
                             JobTxn *txn, Error **errp);

+/*
+ * bitpop_job_create: Create a new bitmap population job.
+ *
+ * @job_id: The id of the newly-created job.
+ * @bs: Block device associated with the @target_bitmap.
+ * @target_bitmap: The bitmap to populate.
+ * @on_error: What to do if an error on @bs is encountered.
+ * @creation_flags: Flags that control the behavior of the Job lifetime.
+ *                  See @BlockJobCreateFlags
+ * @cb: Completion function for the job.
+ * @opaque: Opaque pointer value passed to @cb.
+ * @txn: Transaction that this job is part of (may be NULL).
+ */
+BlockJob *bitpop_job_create(const char *job_id, BlockDriverState *bs,
+                            BdrvDirtyBitmap *target_bitmap,
+                            BitmapPattern pattern,
+                            BlockdevOnError on_error,
+                            int creation_flags,
+                            BlockCompletionFunc *cb, void *opaque,
+                            JobTxn *txn, Error **errp);
+
 BdrvChild *bdrv_root_attach_child(BlockDriverState *child_bs,
                                   const char *child_name,
                                   const BdrvChildClass *child_class,
diff --git a/block/bitmap-populate.c b/block/bitmap-populate.c
new file mode 100644
index 000000000000..901b78b56c3e
--- /dev/null
+++ b/block/bitmap-populate.c
@@ -0,0 +1,207 @@
+/*
+ * Async Dirty Bitmap Populator
+ *
+ * Copyright (C) 2020 Red Hat, Inc.
+ *
+ * Authors:
+ *  John Snow <jsnow@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "trace.h"
+#include "block/block.h"
+#include "block/block_int.h"
+#include "block/blockjob_int.h"
+#include "block/block_backup.h"
+#include "block/block-copy.h"
+#include "qapi/error.h"
+#include "qapi/qmp/qerror.h"
+#include "qemu/ratelimit.h"
+#include "qemu/cutils.h"
+#include "sysemu/block-backend.h"
+#include "qemu/bitmap.h"
+#include "qemu/error-report.h"
+
+typedef struct BitpopBlockJob {
+    BlockJob common;
+    BlockDriverState *bs;
+    BdrvDirtyBitmap *target_bitmap;
+    BdrvDirtyBitmap *new_bitmap;
+    BlockdevOnError on_error;
+    uint64_t len;
+} BitpopBlockJob;
+
+static const BlockJobDriver bitpop_job_driver;
+
+static void bitpop_commit(Job *job)
+{
+    BitpopBlockJob *s = container_of(job, BitpopBlockJob, common.job);
+
+    bdrv_dirty_bitmap_merge_internal(s->target_bitmap, s->new_bitmap,
+                                     NULL, true);
+}
+
+/* no abort needed; just clean without committing. */
+
+static void bitpop_clean(Job *job)
+{
+    BitpopBlockJob *s = container_of(job, BitpopBlockJob, common.job);
+
+    bdrv_release_dirty_bitmap(s->new_bitmap);
+    bdrv_dirty_bitmap_set_busy(s->target_bitmap, false);
+}
+
+static BlockErrorAction bitpop_error_action(BitpopBlockJob *job, int error)
+{
+    return block_job_error_action(&job->common, job->on_error, true, error);
+}
+
+static bool coroutine_fn yield_and_check(Job *job)
+{
+    if (job_is_cancelled(job)) {
+        return true;
+    }
+
+    job_sleep_ns(job, 0);
+
+    if (job_is_cancelled(job)) {
+        return true;
+    }
+
+    return false;
+}
+
+static int coroutine_fn bitpop_run(Job *job, Error **errp)
+{
+    BitpopBlockJob *s = container_of(job, BitpopBlockJob, common.job);
+    int ret = 0;
+    int64_t offset;
+    int64_t count;
+    int64_t bytes;
+
+    for (offset = 0; offset < s->len; ) {
+        if (yield_and_check(job)) {
+            ret = -ECANCELED;
+            break;
+        }
+
+        bytes = s->len - offset;
+        ret = bdrv_is_allocated(s->bs, offset, bytes, &count);
+        if (ret < 0) {
+            if (bitpop_error_action(s, -ret) == BLOCK_ERROR_ACTION_REPORT) {
+                break;
+            }
+            continue;
+        }
+
+        if (!count) {
+            ret = 0;
+            break;
+        }
+
+        if (ret) {
+            bdrv_set_dirty_bitmap(s->new_bitmap, offset, count);
+            ret = 0;
+        }
+
+        job_progress_update(job, count);
+        offset += count;
+    }
+
+    return ret;
+}
+
+static const BlockJobDriver bitpop_job_driver = {
+    .job_driver = {
+        .instance_size          = sizeof(BitpopBlockJob),
+        .job_type               = JOB_TYPE_BITMAP_POPULATE,
+        .free                   = block_job_free,
+        .user_resume            = block_job_user_resume,
+        .run                    = bitpop_run,
+        .commit                 = bitpop_commit,
+        .clean                  = bitpop_clean,
+    }
+};
+
+
+BlockJob *bitpop_job_create(
+    const char *job_id,
+    BlockDriverState *bs,
+    BdrvDirtyBitmap *target_bitmap,
+    BitmapPattern pattern,
+    BlockdevOnError on_error,
+    int creation_flags,
+    BlockCompletionFunc *cb,
+    void *opaque,
+    JobTxn *txn,
+    Error **errp)
+{
+    int64_t len;
+    BitpopBlockJob *job = NULL;
+    int64_t cluster_size;
+    BdrvDirtyBitmap *new_bitmap = NULL;
+
+    assert(bs);
+    assert(target_bitmap);
+
+    if (!bdrv_is_inserted(bs)) {
+        error_setg(errp, "Device is not inserted: %s",
+                   bdrv_get_device_name(bs));
+        return NULL;
+    }
+
+    if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
+        return NULL;
+    }
+
+    if (bdrv_dirty_bitmap_check(target_bitmap, BDRV_BITMAP_DEFAULT, errp)) {
+        return NULL;
+    }
+
+    if (pattern != BITMAP_PATTERN_ALLOCATION_TOP) {
+        error_setg(errp, "Unrecognized bitmap pattern");
+        return NULL;
+    }
+
+    len = bdrv_getlength(bs);
+    if (len < 0) {
+        error_setg_errno(errp, -len, "unable to get length for '%s'",
+                         bdrv_get_device_or_node_name(bs));
+        return NULL;
+    }
+
+    /* NB: new bitmap is anonymous and enabled */
+    cluster_size = bdrv_dirty_bitmap_granularity(target_bitmap);
+    new_bitmap = bdrv_create_dirty_bitmap(bs, cluster_size, NULL, errp);
+    if (!new_bitmap) {
+        return NULL;
+    }
+
+    /* Take ownership; we reserve the right to write into this on-commit. */
+    bdrv_dirty_bitmap_set_busy(target_bitmap, true);
+
+    job = block_job_create(job_id, &bitpop_job_driver, txn, bs,
+                           BLK_PERM_CONSISTENT_READ,
+                           BLK_PERM_ALL & ~BLK_PERM_RESIZE,
+                           0, creation_flags,
+                           cb, opaque, errp);
+    if (!job) {
+        bdrv_dirty_bitmap_set_busy(target_bitmap, false);
+        bdrv_release_dirty_bitmap(new_bitmap);
+        return NULL;
+    }
+
+    job->bs = bs;
+    job->on_error = on_error;
+    job->target_bitmap = target_bitmap;
+    job->new_bitmap = new_bitmap;
+    job->len = len;
+    job_progress_set_remaining(&job->common.job, job->len);
+
+    return &job->common;
+}
diff --git a/blockjob.c b/blockjob.c
index 470facfd47a0..e6ee8376645d 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -56,7 +56,8 @@ static bool is_block_job(Job *job)
     return job_type(job) == JOB_TYPE_BACKUP ||
            job_type(job) == JOB_TYPE_COMMIT ||
            job_type(job) == JOB_TYPE_MIRROR ||
-           job_type(job) == JOB_TYPE_STREAM;
+           job_type(job) == JOB_TYPE_STREAM ||
+           job_type(job) == JOB_TYPE_BITMAP_POPULATE;
 }

 BlockJob *block_job_next(BlockJob *bjob)
diff --git a/MAINTAINERS b/MAINTAINERS
index 955cc8dd5cd0..99651abcac4a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2050,6 +2050,7 @@ S: Supported
 F: include/qemu/hbitmap.h
 F: include/block/dirty-bitmap.h
 F: block/monitor/bitmap-qmp-cmds.c
+F: block/bitmap-populate.c
 F: block/dirty-bitmap.c
 F: block/qcow2-bitmap.c
 F: migration/block-dirty-bitmap.c
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 96028eedcef7..55f5970f7625 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -36,6 +36,7 @@ block-obj-$(CONFIG_LIBSSH) += ssh.o
 block-obj-y += accounting.o dirty-bitmap.o
 block-obj-y += write-threshold.o
 block-obj-y += backup.o
+block-obj-y += bitmap-populate.o
 block-obj-$(CONFIG_REPLICATION) += replication.o
 block-obj-y += throttle.o copy-on-read.o
 block-obj-y += block-copy.o
-- 
2.27.0

Re: [PATCH v3 1/6] block: add bitmap-populate job

[Vladimir Sementsov-Ogievskiy]

19.06.2020 22:56, Eric Blake wrote:
> From: John Snow <jsnow@redhat.com>
> 
> This job copies the allocation map into a bitmap. It's a job because
> there's no guarantee that allocation interrogation will be quick (or
> won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.
> 
> It was designed with different possible population patterns in mind,
> but only top layer allocation was implemented for now.
> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> ---
>   qapi/block-core.json      |  48 +++++++++
>   qapi/job.json             |   6 +-
>   include/block/block_int.h |  21 ++++
>   block/bitmap-populate.c   | 207 ++++++++++++++++++++++++++++++++++++++
>   blockjob.c                |   3 +-
>   MAINTAINERS               |   1 +
>   block/Makefile.objs       |   1 +
>   7 files changed, 285 insertions(+), 2 deletions(-)
>   create mode 100644 block/bitmap-populate.c
> 
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 0e1c6a59f228..a1bcdba04423 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -2211,6 +2211,54 @@
>         { 'command': 'block-dirty-bitmap-merge',
>           'data': 'BlockDirtyBitmapMerge' }
> 
> +##
> +# @BitmapPattern:
> +#
> +# An enumeration of possible patterns that can be written into a bitmap.
> +#
> +# @allocation-top: The allocation status of the top layer
> +#                  of the attached storage node.
> +#
> +# Since: 5.1
> +##
> +{ 'enum': 'BitmapPattern',
> +  'data': ['allocation-top'] }
> +
> +##
> +# @BlockDirtyBitmapPopulate:
> +#
> +# @job-id: identifier for the newly-created block job.
> +#
> +# @pattern: What pattern should be written into the bitmap?
> +#
> +# @on-error: the action to take if an error is encountered on a bitmap's
> +#            attached node, default 'report'.
> +#            'stop' and 'enospc' can only be used if the block device supports
> +#            io-status (see BlockInfo).
> +#
> +# @auto-finalize: When false, this job will wait in a PENDING state after it has
> +#                 finished its work, waiting for @block-job-finalize before
> +#                 making any block graph changes.
> +#                 When true, this job will automatically
> +#                 perform its abort or commit actions.
> +#                 Defaults to true.
> +#
> +# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
> +#                has completely ceased all work, and awaits @block-job-dismiss.
> +#                When true, this job will automatically disappear from the query
> +#                list without user intervention.
> +#                Defaults to true.
> +#
> +# Since: 5.1
> +##
> +{ 'struct': 'BlockDirtyBitmapPopulate',
> +  'base': 'BlockDirtyBitmap',
> +  'data': { 'job-id': 'str',
> +            'pattern': 'BitmapPattern',
> +            '*on-error': 'BlockdevOnError',
> +            '*auto-finalize': 'bool',
> +            '*auto-dismiss': 'bool' } }
> +

Peter said about a possibility of populating several target bitmaps simultaneously.

What about such a generalized semantics:

Merge all sources to each target

@targets: list of bitmaps to be populated by the job
{ 'struct': 'BlockDirtyBitmapPopulate',
   'data': { <common job fields>,
             'targets': ['BlockDirtyBitmap'],
             'sources': ['BitmapPopulateSource'] } }


@bitmap: specify dirty bitmap to be merged to target bitamp(s)
@node: specify a node name, which allocation-map is to be merged to target bitmap(s)
{ 'alternate': 'BitmapPopulateSource',
   'data': { 'bitmap': 'BlockDirtyBitmap',
             'node': 'str' } }


- so, we can merge several bitmaps together with several allocation maps into several target bitmaps.
(I remember, we also said about a possibility of starting several populating jobs, populating into
  same bitmap, I think it may be substituted by one job with several sources. Still, it's not hard to
  allow to use target bitmaps in a several jobs simultaneously and this is not about the QAPI interface)

Will this simplify things in libvirt?

-- 
Best regards,
Vladimir

Re: [PATCH v3 1/6] block: add bitmap-populate job

[Eric Blake]

On 6/19/20 11:16 PM, Vladimir Sementsov-Ogievskiy wrote:
> 19.06.2020 22:56, Eric Blake wrote:
>> From: John Snow <jsnow@redhat.com>
>>
>> This job copies the allocation map into a bitmap. It's a job because
>> there's no guarantee that allocation interrogation will be quick (or
>> won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.
>>
>> It was designed with different possible population patterns in mind,
>> but only top layer allocation was implemented for now.
>>
>> Signed-off-by: John Snow <jsnow@redhat.com>
>> Signed-off-by: Eric Blake <eblake@redhat.com>
>> ---

>> +{ 'struct': 'BlockDirtyBitmapPopulate',
>> +  'base': 'BlockDirtyBitmap',
>> +  'data': { 'job-id': 'str',
>> +            'pattern': 'BitmapPattern',
>> +            '*on-error': 'BlockdevOnError',
>> +            '*auto-finalize': 'bool',
>> +            '*auto-dismiss': 'bool' } }
>> +
> 
> Peter said about a possibility of populating several target bitmaps 
> simultaneously.
> 
> What about such a generalized semantics:
> 
> Merge all sources to each target
> 
> @targets: list of bitmaps to be populated by the job
> { 'struct': 'BlockDirtyBitmapPopulate',
>    'data': { <common job fields>,
>              'targets': ['BlockDirtyBitmap'],
>              'sources': ['BitmapPopulateSource'] } }

We still need the 'pattern' argument (the idea being that if we have: 
Base <- Active, we want to be able to merge in the allocation map of 
Active into bitmaps stored in Base as part of a commit operation, 
whether that is active commit of a live guest or offline commit while 
the guest is offline).  Having an array for 'targets' to merge into is 
fine, but for 'sources', it's less a concern about selecting from 
multiple sources, and more a concern about selecting the allocation 
pattern to be merged in (libvirt wants to merge the same allocation 
pattern into each bitmap in Base).  Generalizing things to allow the 
merge of more than one source at once might not hurt, but I'm not sure 
we need it yet.

But there are other patterns that we may want to support: an all-ones 
pattern, or maybe a pattern that tracks known-zeros instead of allocation.

> 
> 
> @bitmap: specify dirty bitmap to be merged to target bitamp(s)
> @node: specify a node name, which allocation-map is to be merged to 
> target bitmap(s)
> { 'alternate': 'BitmapPopulateSource',
>    'data': { 'bitmap': 'BlockDirtyBitmap',
>              'node': 'str' } }

This design is clever in that it lets us merge in both existing bitmaps 
and using a node-name for merging in an allocation map instead of a 
bitmap; but it limits us to only one pattern.  Better might be something 
where we supply a union (hmm, we've had proposals in the past for a 
default value to the discriminator to allow it to be optional, so I'll 
proceed as if we will finally implement that):

{ 'enum': 'BitmapPattern', 'data': [ 'bitmap', 'allocation-top' ] }
{ 'union': 'BitmapPopulateSource',
   'base': { '*pattern': 'BitmapPattern' },
   'discriminator': { 'name': 'pattern', 'default': 'bitmap' },
   'data': { 'bitmap': 'BitmapPopulateSource',
             'allocation-top': { 'node': 'str' } } }

so that you can then do:

{ "execute": "block-dirty-bitmap-populate",
   "arguments": { "targets": [ { "node": "base", "name": "b1" },
                               { "node": "base", "name": "b2" } ],
         "sources": [ { "pattern": "allocation-top", "node": "top" } ]
   } }

to merge in the allocation information of top into multiple bitmaps of 
base at once, or conversely, do:

{ "execute": "block-dirty-bitmap-populate",
   "arguments": { "targets": [ { "node": "base", "name": "b1" } ],
         "sources": [ { "pattern": "bitmap",
                        "node": "top", "name": "b1" } ]
   } }
{ "execute": "block-dirty-bitmap-populate",
   "arguments": { "targets": [ { "node": "base", "name": "b2" } ],
         "sources": [ { "node": "top", "name": "b2" } ]
   } }

and of course, wrap this in a "transaction" to ensure that it all 
succeeds or fails as a unit, rather than messing up one bitmap if 
another fails, while also allowing future extension for additional patterns.

> 
> 
> - so, we can merge several bitmaps together with several allocation maps 
> into several target bitmaps.
> (I remember, we also said about a possibility of starting several 
> populating jobs, populating into
>   same bitmap, I think it may be substituted by one job with several 
> sources. Still, it's not hard to
>   allow to use target bitmaps in a several jobs simultaneously and this 
> is not about the QAPI interface)
> 
> Will this simplify things in libvirt?

Peter, in your preliminary experiments with block-dirty-bitmap-populate, 
did you ever need to start more than one job to a single bitmap 
destination, or was it merely starting multiple jobs because you had 
multiple destinations but always just a single source?


-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org

Re: [PATCH v3 1/6] block: add bitmap-populate job

[Vladimir Sementsov-Ogievskiy]

23.06.2020 00:44, Eric Blake wrote:
> On 6/19/20 11:16 PM, Vladimir Sementsov-Ogievskiy wrote:
>> 19.06.2020 22:56, Eric Blake wrote:
>>> From: John Snow <jsnow@redhat.com>
>>>
>>> This job copies the allocation map into a bitmap. It's a job because
>>> there's no guarantee that allocation interrogation will be quick (or
>>> won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.
>>>
>>> It was designed with different possible population patterns in mind,
>>> but only top layer allocation was implemented for now.
>>>
>>> Signed-off-by: John Snow <jsnow@redhat.com>
>>> Signed-off-by: Eric Blake <eblake@redhat.com>
>>> ---
> 
>>> +{ 'struct': 'BlockDirtyBitmapPopulate',
>>> +  'base': 'BlockDirtyBitmap',
>>> +  'data': { 'job-id': 'str',
>>> +            'pattern': 'BitmapPattern',
>>> +            '*on-error': 'BlockdevOnError',
>>> +            '*auto-finalize': 'bool',
>>> +            '*auto-dismiss': 'bool' } }
>>> +
>>
>> Peter said about a possibility of populating several target bitmaps simultaneously.
>>
>> What about such a generalized semantics:
>>
>> Merge all sources to each target
>>
>> @targets: list of bitmaps to be populated by the job
>> { 'struct': 'BlockDirtyBitmapPopulate',
>>    'data': { <common job fields>,
>>              'targets': ['BlockDirtyBitmap'],
>>              'sources': ['BitmapPopulateSource'] } }
> 
> We still need the 'pattern' argument (the idea being that if we have: Base <- Active, we want to be able to merge in the allocation map of Active into bitmaps stored in Base as part of a commit operation, whether that is active commit of a live guest or offline commit while the guest is offline).  Having an array for 'targets' to merge into is fine, but for 'sources', it's less a concern about selecting from multiple sources, and more a concern about selecting the allocation pattern to be merged in (libvirt wants to merge the same allocation pattern into each bitmap in Base).  Generalizing things to allow the merge of more than one source at once might not hurt, but I'm not sure we need it yet.
> 
> But there are other patterns that we may want to support: an all-ones pattern, or maybe a pattern that tracks known-zeros instead of allocation.
> 
>>
>>
>> @bitmap: specify dirty bitmap to be merged to target bitamp(s)
>> @node: specify a node name, which allocation-map is to be merged to target bitmap(s)
>> { 'alternate': 'BitmapPopulateSource',
>>    'data': { 'bitmap': 'BlockDirtyBitmap',
>>              'node': 'str' } }
> 
> This design is clever in that it lets us merge in both existing bitmaps and using a node-name for merging in an allocation map instead of a bitmap; but it limits us to only one pattern.

Ah, yes, we can't discriminate by type node-name from 'all-ones' or something like this.

>Better might be something where we supply a union (hmm, we've had proposals in the past for a default value to the discriminator to allow it to be optional, so I'll proceed as if we will finally implement that):
> 
> { 'enum': 'BitmapPattern', 'data': [ 'bitmap', 'allocation-top' ] }
> { 'union': 'BitmapPopulateSource',
>    'base': { '*pattern': 'BitmapPattern' },
>    'discriminator': { 'name': 'pattern', 'default': 'bitmap' },
>    'data': { 'bitmap': 'BitmapPopulateSource',
>              'allocation-top': { 'node': 'str' } } }

Yes, this is better, of course.

> 
> so that you can then do:
> 
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b1" },
>                                { "node": "base", "name": "b2" } ],
>          "sources": [ { "pattern": "allocation-top", "node": "top" } ]
>    } }
> 
> to merge in the allocation information of top into multiple bitmaps of base at once, or conversely, do:
> 
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b1" } ],
>          "sources": [ { "pattern": "bitmap",
>                         "node": "top", "name": "b1" } ]
>    } }
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b2" } ],
>          "sources": [ { "node": "top", "name": "b2" } ]
>    } }
> 
> and of course, wrap this in a "transaction" to ensure that it all succeeds or fails as a unit, rather than messing up one bitmap if another fails, while also allowing future extension for additional patterns.
> 
>>
>>
>> - so, we can merge several bitmaps together with several allocation maps into several target bitmaps.
>> (I remember, we also said about a possibility of starting several populating jobs, populating into
>>   same bitmap, I think it may be substituted by one job with several sources. Still, it's not hard to
>>   allow to use target bitmaps in a several jobs simultaneously and this is not about the QAPI interface)
>>
>> Will this simplify things in libvirt?
> 
> Peter, in your preliminary experiments with block-dirty-bitmap-populate, did you ever need to start more than one job to a single bitmap destination, or was it merely starting multiple jobs because you had multiple destinations but always just a single source?
> 
> 


-- 
Best regards,
Vladimir

Re: [PATCH v3 1/6] block: add bitmap-populate job

[Eric Blake]

[reviving an old thread]

On 6/22/20 4:44 PM, Eric Blake wrote:
> On 6/19/20 11:16 PM, Vladimir Sementsov-Ogievskiy wrote:
>> 19.06.2020 22:56, Eric Blake wrote:
>>> From: John Snow <jsnow@redhat.com>
>>>
>>> This job copies the allocation map into a bitmap. It's a job because
>>> there's no guarantee that allocation interrogation will be quick (or
>>> won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.
>>>
>>> It was designed with different possible population patterns in mind,
>>> but only top layer allocation was implemented for now.
>>>
>>> Signed-off-by: John Snow <jsnow@redhat.com>
>>> Signed-off-by: Eric Blake <eblake@redhat.com>
>>> ---
> 
>>> +{ 'struct': 'BlockDirtyBitmapPopulate',
>>> +  'base': 'BlockDirtyBitmap',
>>> +  'data': { 'job-id': 'str',
>>> +            'pattern': 'BitmapPattern',

As written, "pattern":"allocate-top" is rather limited - it can only 
grab allocation from the top node.  Being able to grab the allocation 
from a specific node may indeed be more useful.  Another bitmap patterns 
that might be useful would be an all-one pattern (create a bitmap that 
treats the entire disk as dirty).  I also remember brainstorming with 
John the question of whether we want bitmap-populate to have different 
mask modes: does the population perform an overwrite (the bitmap now 
matches the source pattern exactly, even if some bits were set and 
others cleared), a union merge (any bits already set in the bitmap 
remain set, additional bits are set according to pattern), or even a 
difference (any bits already cleared in the bitmap remain clear, while 
bits in the pattern can also clear additional bits in the bitmap).

If I understand Peter's goals, the initial libvirt use is a union mode 
(keep bits in the bitmap that are already set, but set additional bits 
according to the population pattern).

>>> +            '*on-error': 'BlockdevOnError',
>>> +            '*auto-finalize': 'bool',
>>> +            '*auto-dismiss': 'bool' } }
>>> +
>>
>> Peter said about a possibility of populating several target bitmaps 
>> simultaneously.
>>
>> What about such a generalized semantics:
>>
>> Merge all sources to each target
>>
>> @targets: list of bitmaps to be populated by the job
>> { 'struct': 'BlockDirtyBitmapPopulate',
>>    'data': { <common job fields>,
>>              'targets': ['BlockDirtyBitmap'],
>>              'sources': ['BitmapPopulateSource'] } }
> 
> We still need the 'pattern' argument (the idea being that if we have: 
> Base <- Active, we want to be able to merge in the allocation map of 
> Active into bitmaps stored in Base as part of a commit operation, 
> whether that is active commit of a live guest or offline commit while 
> the guest is offline).  Having an array for 'targets' to merge into is 
> fine, but for 'sources', it's less a concern about selecting from 
> multiple sources, and more a concern about selecting the allocation 
> pattern to be merged in (libvirt wants to merge the same allocation 
> pattern into each bitmap in Base).  Generalizing things to allow the 
> merge of more than one source at once might not hurt, but I'm not sure 
> we need it yet.

But when it comes to multiple destinations or multiple sources, while it 
seems like it might be a convenience factor, I also worry that it is 
over-engineering.  See more below...

> 
> But there are other patterns that we may want to support: an all-ones 
> pattern, or maybe a pattern that tracks known-zeros instead of allocation.
> 
>>
>>
>> @bitmap: specify dirty bitmap to be merged to target bitamp(s)
>> @node: specify a node name, which allocation-map is to be merged to 
>> target bitmap(s)
>> { 'alternate': 'BitmapPopulateSource',
>>    'data': { 'bitmap': 'BlockDirtyBitmap',
>>              'node': 'str' } }
> 
> This design is clever in that it lets us merge in both existing bitmaps 
> and using a node-name for merging in an allocation map instead of a 
> bitmap; but it limits us to only one pattern.  Better might be something 
> where we supply a union (hmm, we've had proposals in the past for a 
> default value to the discriminator to allow it to be optional, so I'll 
> proceed as if we will finally implement that):
> 
> { 'enum': 'BitmapPattern', 'data': [ 'bitmap', 'allocation-top' ] }
> { 'union': 'BitmapPopulateSource',
>    'base': { '*pattern': 'BitmapPattern' },
>    'discriminator': { 'name': 'pattern', 'default': 'bitmap' },
>    'data': { 'bitmap': 'BitmapPopulateSource',
>              'allocation-top': { 'node': 'str' } } }
> 
> so that you can then do:
> 
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b1" },
>                                { "node": "base", "name": "b2" } ],
>          "sources": [ { "pattern": "allocation-top", "node": "top" } ]
>    } }
> 
> to merge in the allocation information of top into multiple bitmaps of 
> base at once,

Hmm, I left out the mandatory "job-id" parameter here; one of the key 
points of the new command is that some patterns (like allocation) may 
involve potentially lengthy I/O, so we need a job-id (the existing 
block-dirty-bitmap-merge does not).  But since the existing 
block-dirty-bitmap-merge supports multiple sources to one destination, 
supporting multiple patterns to one destination tracked by a single job 
id does have some appeal.

> or conversely, do:
> 
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b1" } ],
>          "sources": [ { "pattern": "bitmap",
>                         "node": "top", "name": "b1" } ]
>    } }
> { "execute": "block-dirty-bitmap-populate",
>    "arguments": { "targets": [ { "node": "base", "name": "b2" } ],
>          "sources": [ { "node": "top", "name": "b2" } ]
>    } }
> 
> and of course, wrap this in a "transaction" to ensure that it all 
> succeeds or fails as a unit, rather than messing up one bitmap if 
> another fails, while also allowing future extension for additional 
> patterns.

We already have transactions that let us perform multiple destinations 
as a group.  So what is the difference in the end results between 
merging one source into two separate destinations in one command spelled 
this way:

# proposal with many:many bitmap populate
{ "execute": "block-dirty-bitmap-populate",
   "arguments": { "job-id": "job0",
                  "targets": [ { "node": "base", "name": "b1" },
                               { "node": "base", "name": "b2" } ],
                  "source": { "pattern": "allocation", "node": "top" } } }
wait for job to complete

vs. spelled this way:

# patch as written with 1:1 bitmap-populate, but tweak to source
{ "execute": "block-dirty-bitmap-add",
   "arguments": { "node": "top", "name": "tmp" } }
{ "execute": "block-dirty-bitmap-populate",
   "arguments": { "job-id": "job0",
                  "node": "top", "name": "tmp",
                  "source": { "pattern": "allocation", "node": "top" } } }
wait for job to complete
{ "execute": "transaction",
   "arguments": { "actions": [
     { "type": "block-dirty-bitmap-merge", "node": "base", "name": "b1",
         "bitmaps": [ { "node": "top", "name": "tmp" } ] },
     { "type": "block-dirty-bitmap-merge", "node": "base", "name": "b2",
         "bitmaps": [ { "node": "top", "name": "tmp" } ] }
] } }



> 
>>
>>
>> - so, we can merge several bitmaps together with several allocation 
>> maps into several target bitmaps.
>> (I remember, we also said about a possibility of starting several 
>> populating jobs, populating into
>>   same bitmap, I think it may be substituted by one job with several 
>> sources. Still, it's not hard to
>>   allow to use target bitmaps in a several jobs simultaneously and 
>> this is not about the QAPI interface)
>>
>> Will this simplify things in libvirt?
> 
> Peter, in your preliminary experiments with block-dirty-bitmap-populate, 
> did you ever need to start more than one job to a single bitmap 
> destination, or was it merely starting multiple jobs because you had 
> multiple destinations but always just a single source?

I guess I'm struggling in posting a v4 in part because I don't have a 
good answer to what is easiest for Peter to use.

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org

Re: [PATCH v3 1/6] block: add bitmap-populate job

[Kevin Wolf]

Am 19.06.2020 um 21:56 hat Eric Blake geschrieben:
> From: John Snow <jsnow@redhat.com>
> 
> This job copies the allocation map into a bitmap. It's a job because
> there's no guarantee that allocation interrogation will be quick (or
> won't hang), so it cannot be retrofitted into block-dirty-bitmap-merge.
> 
> It was designed with different possible population patterns in mind,
> but only top layer allocation was implemented for now.
> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> Signed-off-by: Eric Blake <eblake@redhat.com>

> +BlockJob *bitpop_job_create(
> +    const char *job_id,
> +    BlockDriverState *bs,
> +    BdrvDirtyBitmap *target_bitmap,
> +    BitmapPattern pattern,
> +    BlockdevOnError on_error,
> +    int creation_flags,
> +    BlockCompletionFunc *cb,
> +    void *opaque,
> +    JobTxn *txn,
> +    Error **errp)
> +{
> +    int64_t len;
> +    BitpopBlockJob *job = NULL;
> +    int64_t cluster_size;
> +    BdrvDirtyBitmap *new_bitmap = NULL;
> +
> +    assert(bs);
> +    assert(target_bitmap);
> +
> +    if (!bdrv_is_inserted(bs)) {
> +        error_setg(errp, "Device is not inserted: %s",
> +                   bdrv_get_device_name(bs));
> +        return NULL;
> +    }
> +
> +    if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> +        return NULL;
> +    }

So did we decide that we'll keep the legacy op blocker with the type of
another block job even though nobody could tell what it's good for?

Kevin

[PATCH v3 2/6] blockdev: combine DriveBackupState and BlockdevBackupState

[Eric Blake]

From: John Snow <jsnow@redhat.com>

They have the same fields -- rename it BlockJobActionState.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
 blockdev.c | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 72df193ca73b..6d80af903c55 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1655,11 +1655,11 @@ static void external_snapshot_clean(BlkActionState *common)
     aio_context_release(aio_context);
 }

-typedef struct DriveBackupState {
+typedef struct BlockJobActionState {
     BlkActionState common;
     BlockDriverState *bs;
     BlockJob *job;
-} DriveBackupState;
+} BlockJobActionState;

 static BlockJob *do_backup_common(BackupCommon *backup,
                                   BlockDriverState *bs,
@@ -1669,7 +1669,7 @@ static BlockJob *do_backup_common(BackupCommon *backup,

 static void drive_backup_prepare(BlkActionState *common, Error **errp)
 {
-    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     DriveBackup *backup;
     BlockDriverState *bs;
     BlockDriverState *target_bs;
@@ -1806,7 +1806,7 @@ out:

 static void drive_backup_commit(BlkActionState *common)
 {
-    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     AioContext *aio_context;

     aio_context = bdrv_get_aio_context(state->bs);
@@ -1820,7 +1820,7 @@ static void drive_backup_commit(BlkActionState *common)

 static void drive_backup_abort(BlkActionState *common)
 {
-    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);

     if (state->job) {
         AioContext *aio_context;
@@ -1836,7 +1836,7 @@ static void drive_backup_abort(BlkActionState *common)

 static void drive_backup_clean(BlkActionState *common)
 {
-    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     AioContext *aio_context;

     if (!state->bs) {
@@ -1851,15 +1851,9 @@ static void drive_backup_clean(BlkActionState *common)
     aio_context_release(aio_context);
 }

-typedef struct BlockdevBackupState {
-    BlkActionState common;
-    BlockDriverState *bs;
-    BlockJob *job;
-} BlockdevBackupState;
-
 static void blockdev_backup_prepare(BlkActionState *common, Error **errp)
 {
-    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     BlockdevBackup *backup;
     BlockDriverState *bs;
     BlockDriverState *target_bs;
@@ -1907,7 +1901,7 @@ static void blockdev_backup_prepare(BlkActionState *common, Error **errp)

 static void blockdev_backup_commit(BlkActionState *common)
 {
-    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     AioContext *aio_context;

     aio_context = bdrv_get_aio_context(state->bs);
@@ -1921,7 +1915,7 @@ static void blockdev_backup_commit(BlkActionState *common)

 static void blockdev_backup_abort(BlkActionState *common)
 {
-    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);

     if (state->job) {
         AioContext *aio_context;
@@ -1937,7 +1931,7 @@ static void blockdev_backup_abort(BlkActionState *common)

 static void blockdev_backup_clean(BlkActionState *common)
 {
-    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
     AioContext *aio_context;

     if (!state->bs) {
@@ -2209,14 +2203,14 @@ static const BlkActionOps actions[] = {
         .clean = external_snapshot_clean,
     },
     [TRANSACTION_ACTION_KIND_DRIVE_BACKUP] = {
-        .instance_size = sizeof(DriveBackupState),
+        .instance_size = sizeof(BlockJobActionState),
         .prepare = drive_backup_prepare,
         .commit = drive_backup_commit,
         .abort = drive_backup_abort,
         .clean = drive_backup_clean,
     },
     [TRANSACTION_ACTION_KIND_BLOCKDEV_BACKUP] = {
-        .instance_size = sizeof(BlockdevBackupState),
+        .instance_size = sizeof(BlockJobActionState),
         .prepare = blockdev_backup_prepare,
         .commit = blockdev_backup_commit,
         .abort = blockdev_backup_abort,
-- 
2.27.0

Re: [PATCH v3 2/6] blockdev: combine DriveBackupState and BlockdevBackupState

[Vladimir Sementsov-Ogievskiy]

19.06.2020 22:56, Eric Blake wrote:
> From: John Snow <jsnow@redhat.com>
> 
> They have the same fields -- rename it BlockJobActionState.

commit/abort/clean functions are identical after it. I think better to combine them as well here

> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> ---
>   blockdev.c | 30 ++++++++++++------------------
>   1 file changed, 12 insertions(+), 18 deletions(-)
> 
> diff --git a/blockdev.c b/blockdev.c
> index 72df193ca73b..6d80af903c55 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -1655,11 +1655,11 @@ static void external_snapshot_clean(BlkActionState *common)
>       aio_context_release(aio_context);
>   }
> 
> -typedef struct DriveBackupState {
> +typedef struct BlockJobActionState {
>       BlkActionState common;
>       BlockDriverState *bs;
>       BlockJob *job;
> -} DriveBackupState;
> +} BlockJobActionState;
> 
>   static BlockJob *do_backup_common(BackupCommon *backup,
>                                     BlockDriverState *bs,
> @@ -1669,7 +1669,7 @@ static BlockJob *do_backup_common(BackupCommon *backup,
> 
>   static void drive_backup_prepare(BlkActionState *common, Error **errp)
>   {
> -    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       DriveBackup *backup;
>       BlockDriverState *bs;
>       BlockDriverState *target_bs;
> @@ -1806,7 +1806,7 @@ out:
> 
>   static void drive_backup_commit(BlkActionState *common)
>   {
> -    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       AioContext *aio_context;
> 
>       aio_context = bdrv_get_aio_context(state->bs);
> @@ -1820,7 +1820,7 @@ static void drive_backup_commit(BlkActionState *common)
> 
>   static void drive_backup_abort(BlkActionState *common)
>   {
> -    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
> 
>       if (state->job) {
>           AioContext *aio_context;
> @@ -1836,7 +1836,7 @@ static void drive_backup_abort(BlkActionState *common)
> 
>   static void drive_backup_clean(BlkActionState *common)
>   {
> -    DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       AioContext *aio_context;
> 
>       if (!state->bs) {
> @@ -1851,15 +1851,9 @@ static void drive_backup_clean(BlkActionState *common)
>       aio_context_release(aio_context);
>   }
> 
> -typedef struct BlockdevBackupState {
> -    BlkActionState common;
> -    BlockDriverState *bs;
> -    BlockJob *job;
> -} BlockdevBackupState;
> -
>   static void blockdev_backup_prepare(BlkActionState *common, Error **errp)
>   {
> -    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       BlockdevBackup *backup;
>       BlockDriverState *bs;
>       BlockDriverState *target_bs;
> @@ -1907,7 +1901,7 @@ static void blockdev_backup_prepare(BlkActionState *common, Error **errp)
> 
>   static void blockdev_backup_commit(BlkActionState *common)
>   {
> -    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       AioContext *aio_context;
> 
>       aio_context = bdrv_get_aio_context(state->bs);
> @@ -1921,7 +1915,7 @@ static void blockdev_backup_commit(BlkActionState *common)
> 
>   static void blockdev_backup_abort(BlkActionState *common)
>   {
> -    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
> 
>       if (state->job) {
>           AioContext *aio_context;
> @@ -1937,7 +1931,7 @@ static void blockdev_backup_abort(BlkActionState *common)
> 
>   static void blockdev_backup_clean(BlkActionState *common)
>   {
> -    BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
> +    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
>       AioContext *aio_context;
> 
>       if (!state->bs) {
> @@ -2209,14 +2203,14 @@ static const BlkActionOps actions[] = {
>           .clean = external_snapshot_clean,
>       },
>       [TRANSACTION_ACTION_KIND_DRIVE_BACKUP] = {
> -        .instance_size = sizeof(DriveBackupState),
> +        .instance_size = sizeof(BlockJobActionState),
>           .prepare = drive_backup_prepare,
>           .commit = drive_backup_commit,
>           .abort = drive_backup_abort,
>           .clean = drive_backup_clean,
>       },
>       [TRANSACTION_ACTION_KIND_BLOCKDEV_BACKUP] = {
> -        .instance_size = sizeof(BlockdevBackupState),
> +        .instance_size = sizeof(BlockJobActionState),
>           .prepare = blockdev_backup_prepare,
>           .commit = blockdev_backup_commit,
>           .abort = blockdev_backup_abort,
> 


-- 
Best regards,
Vladimir

Re: [PATCH v3 2/6] blockdev: combine DriveBackupState and BlockdevBackupState

[Eric Blake]

On 6/22/20 12:12 AM, Vladimir Sementsov-Ogievskiy wrote:
> 19.06.2020 22:56, Eric Blake wrote:
>> From: John Snow <jsnow@redhat.com>
>>
>> They have the same fields -- rename it BlockJobActionState.
> 
> commit/abort/clean functions are identical after it. I think better to 
> combine them as well here

I'll give it a shot in v4 (may be done as a separate patch for ease of 
review, though).

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org

[PATCH v3 3/6] qmp: expose block-dirty-bitmap-populate

[Eric Blake]

From: John Snow <jsnow@redhat.com>

This is a new job-creating command.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
 qapi/block-core.json  | 18 +++++++++++
 qapi/transaction.json |  2 ++
 blockdev.c            | 74 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 94 insertions(+)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index a1bcdba04423..313583b47c16 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2259,6 +2259,24 @@
             '*auto-finalize': 'bool',
             '*auto-dismiss': 'bool' } }

+##
+# @block-dirty-bitmap-populate:
+#
+# Creates a new job that writes a pattern into a dirty bitmap.
+#
+# Since: 5.1
+#
+# Example:
+#
+# -> { "execute": "block-dirty-bitmap-populate",
+#      "arguments": { "node": "drive0", "target": "bitmap0",
+#                     "job-id": "job0", "pattern": "allocate-top" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'block-dirty-bitmap-populate', 'boxed': true,
+  'data': 'BlockDirtyBitmapPopulate' }
+
 ##
 # @BlockDirtyBitmapSha256:
 #
diff --git a/qapi/transaction.json b/qapi/transaction.json
index b6c11158f0b6..21be59faae56 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -50,6 +50,7 @@
 # - @block-dirty-bitmap-enable: since 4.0
 # - @block-dirty-bitmap-disable: since 4.0
 # - @block-dirty-bitmap-merge: since 4.0
+# - @block-dirty-bitmap-populate: since 5.1
 # - @blockdev-backup: since 2.3
 # - @blockdev-snapshot: since 2.5
 # - @blockdev-snapshot-internal-sync: since 1.7
@@ -67,6 +68,7 @@
        'block-dirty-bitmap-enable': 'BlockDirtyBitmap',
        'block-dirty-bitmap-disable': 'BlockDirtyBitmap',
        'block-dirty-bitmap-merge': 'BlockDirtyBitmapMerge',
+       'block-dirty-bitmap-populate': 'BlockDirtyBitmapPopulate',
        'blockdev-backup': 'BlockdevBackup',
        'blockdev-snapshot': 'BlockdevSnapshot',
        'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
diff --git a/blockdev.c b/blockdev.c
index 6d80af903c55..d072519e7b91 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2177,6 +2177,63 @@ static void block_dirty_bitmap_remove_commit(BlkActionState *common)
     bdrv_release_dirty_bitmap(state->bitmap);
 }

+static void block_dirty_bitmap_populate_prepare(BlkActionState *common,
+                                                Error **errp)
+{
+    BlockJobActionState *state = DO_UPCAST(BlockJobActionState, common, common);
+    BlockDirtyBitmapPopulate *bitpop;
+    BlockDriverState *bs;
+    AioContext *aio_context;
+    BdrvDirtyBitmap *bmap = NULL;
+    int job_flags = JOB_DEFAULT;
+
+    assert(common->action->type ==
+           TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE);
+    bitpop = common->action->u.block_dirty_bitmap_populate.data;
+
+    bmap = block_dirty_bitmap_lookup(bitpop->node, bitpop->name, &bs, errp);
+    if (!bmap) {
+        return;
+    }
+
+    aio_context = bdrv_get_aio_context(bs);
+    aio_context_acquire(aio_context);
+    state->bs = bs;
+
+    /* Paired with .clean() */
+    bdrv_drained_begin(state->bs);
+
+    if (!bitpop->has_on_error) {
+        bitpop->on_error = BLOCKDEV_ON_ERROR_REPORT;
+    }
+    if (!bitpop->has_auto_finalize) {
+        bitpop->auto_finalize = true;
+    }
+    if (!bitpop->has_auto_dismiss) {
+        bitpop->auto_dismiss = true;
+    }
+
+    if (!bitpop->auto_finalize) {
+        job_flags |= JOB_MANUAL_FINALIZE;
+    }
+    if (!bitpop->auto_dismiss) {
+        job_flags |= JOB_MANUAL_DISMISS;
+    }
+
+    state->job = bitpop_job_create(
+        bitpop->job_id,
+        bs,
+        bmap,
+        bitpop->pattern,
+        bitpop->on_error,
+        job_flags,
+        NULL, NULL,
+        common->block_job_txn,
+        errp);
+
+    aio_context_release(aio_context);
+}
+
 static void abort_prepare(BlkActionState *common, Error **errp)
 {
     error_setg(errp, "Transaction aborted using Abort action");
@@ -2260,6 +2317,13 @@ static const BlkActionOps actions[] = {
         .commit = block_dirty_bitmap_remove_commit,
         .abort = block_dirty_bitmap_remove_abort,
     },
+    [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE] = {
+        .instance_size = sizeof(BlockJobActionState),
+        .prepare = block_dirty_bitmap_populate_prepare,
+        .commit = blockdev_backup_commit,
+        .abort = blockdev_backup_abort,
+        .clean = blockdev_backup_clean,
+    },
     /* Where are transactions for MIRROR, COMMIT and STREAM?
      * Although these blockjobs use transaction callbacks like the backup job,
      * these jobs do not necessarily adhere to transaction semantics.
@@ -2379,6 +2443,16 @@ void qmp_block_passwd(bool has_device, const char *device,
                "Setting block passwords directly is no longer supported");
 }

+void qmp_block_dirty_bitmap_populate(BlockDirtyBitmapPopulate *bitpop,
+                                     Error **errp)
+{
+    TransactionAction action = {
+        .type = TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE,
+        .u.block_dirty_bitmap_populate.data = bitpop,
+    };
+    blockdev_do_action(&action, errp);
+}
+
 BlockDirtyBitmapSha256 *qmp_x_debug_block_dirty_bitmap_sha256(const char *node,
                                                               const char *name,
                                                               Error **errp)
-- 
2.27.0

[PATCH v3 4/6] iotests: move bitmap helpers into their own file

[Eric Blake]

From: John Snow <jsnow@redhat.com>

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200514034922.24834-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
 tests/qemu-iotests/257        | 110 +---------------------------
 tests/qemu-iotests/bitmaps.py | 131 ++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+), 109 deletions(-)
 create mode 100644 tests/qemu-iotests/bitmaps.py

diff --git a/tests/qemu-iotests/257 b/tests/qemu-iotests/257
index 004a433b8be2..2a81f9e30c56 100755
--- a/tests/qemu-iotests/257
+++ b/tests/qemu-iotests/257
@@ -24,120 +24,12 @@ import os

 import iotests
 from iotests import log, qemu_img
+from bitmaps import EmulatedBitmap, GROUPS

 SIZE = 64 * 1024 * 1024
 GRANULARITY = 64 * 1024


-class Pattern:
-    def __init__(self, byte, offset, size=GRANULARITY):
-        self.byte = byte
-        self.offset = offset
-        self.size = size
-
-    def bits(self, granularity):
-        lower = self.offset // granularity
-        upper = (self.offset + self.size - 1) // granularity
-        return set(range(lower, upper + 1))
-
-
-class PatternGroup:
-    """Grouping of Pattern objects. Initialize with an iterable of Patterns."""
-    def __init__(self, patterns):
-        self.patterns = patterns
-
-    def bits(self, granularity):
-        """Calculate the unique bits dirtied by this pattern grouping"""
-        res = set()
-        for pattern in self.patterns:
-            res |= pattern.bits(granularity)
-        return res
-
-
-GROUPS = [
-    PatternGroup([
-        # Batch 0: 4 clusters
-        Pattern('0x49', 0x0000000),
-        Pattern('0x6c', 0x0100000),   # 1M
-        Pattern('0x6f', 0x2000000),   # 32M
-        Pattern('0x76', 0x3ff0000)]), # 64M - 64K
-    PatternGroup([
-        # Batch 1: 6 clusters (3 new)
-        Pattern('0x65', 0x0000000),   # Full overwrite
-        Pattern('0x77', 0x00f8000),   # Partial-left (1M-32K)
-        Pattern('0x72', 0x2008000),   # Partial-right (32M+32K)
-        Pattern('0x69', 0x3fe0000)]), # Adjacent-left (64M - 128K)
-    PatternGroup([
-        # Batch 2: 7 clusters (3 new)
-        Pattern('0x74', 0x0010000),   # Adjacent-right
-        Pattern('0x69', 0x00e8000),   # Partial-left  (1M-96K)
-        Pattern('0x6e', 0x2018000),   # Partial-right (32M+96K)
-        Pattern('0x67', 0x3fe0000,
-                2*GRANULARITY)]),     # Overwrite [(64M-128K)-64M)
-    PatternGroup([
-        # Batch 3: 8 clusters (5 new)
-        # Carefully chosen such that nothing re-dirties the one cluster
-        # that copies out successfully before failure in Group #1.
-        Pattern('0xaa', 0x0010000,
-                3*GRANULARITY),       # Overwrite and 2x Adjacent-right
-        Pattern('0xbb', 0x00d8000),   # Partial-left (1M-160K)
-        Pattern('0xcc', 0x2028000),   # Partial-right (32M+160K)
-        Pattern('0xdd', 0x3fc0000)]), # New; leaving a gap to the right
-]
-
-
-class EmulatedBitmap:
-    def __init__(self, granularity=GRANULARITY):
-        self._bits = set()
-        self.granularity = granularity
-
-    def dirty_bits(self, bits):
-        self._bits |= set(bits)
-
-    def dirty_group(self, n):
-        self.dirty_bits(GROUPS[n].bits(self.granularity))
-
-    def clear(self):
-        self._bits = set()
-
-    def clear_bits(self, bits):
-        self._bits -= set(bits)
-
-    def clear_bit(self, bit):
-        self.clear_bits({bit})
-
-    def clear_group(self, n):
-        self.clear_bits(GROUPS[n].bits(self.granularity))
-
-    @property
-    def first_bit(self):
-        return sorted(self.bits)[0]
-
-    @property
-    def bits(self):
-        return self._bits
-
-    @property
-    def count(self):
-        return len(self.bits)
-
-    def compare(self, qmp_bitmap):
-        """
-        Print a nice human-readable message checking that a bitmap as reported
-        by the QMP interface has as many bits set as we expect it to.
-        """
-
-        name = qmp_bitmap.get('name', '(anonymous)')
-        log("= Checking Bitmap {:s} =".format(name))
-
-        want = self.count
-        have = qmp_bitmap['count'] // qmp_bitmap['granularity']
-
-        log("expecting {:d} dirty sectors; have {:d}. {:s}".format(
-            want, have, "OK!" if want == have else "ERROR!"))
-        log('')
-
-
 class Drive:
     """Represents, vaguely, a drive attached to a VM.
     Includes format, graph, and device information."""
diff --git a/tests/qemu-iotests/bitmaps.py b/tests/qemu-iotests/bitmaps.py
new file mode 100644
index 000000000000..522fc25171d1
--- /dev/null
+++ b/tests/qemu-iotests/bitmaps.py
@@ -0,0 +1,131 @@
+# Bitmap-related helper utilities
+#
+# Copyright (c) 2020 John Snow for Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# owner=jsnow@redhat.com
+
+from iotests import log
+
+GRANULARITY = 64 * 1024
+
+
+class Pattern:
+    def __init__(self, byte, offset, size=GRANULARITY):
+        self.byte = byte
+        self.offset = offset
+        self.size = size
+
+    def bits(self, granularity):
+        lower = self.offset // granularity
+        upper = (self.offset + self.size - 1) // granularity
+        return set(range(lower, upper + 1))
+
+
+class PatternGroup:
+    """Grouping of Pattern objects. Initialize with an iterable of Patterns."""
+    def __init__(self, patterns):
+        self.patterns = patterns
+
+    def bits(self, granularity):
+        """Calculate the unique bits dirtied by this pattern grouping"""
+        res = set()
+        for pattern in self.patterns:
+            res |= pattern.bits(granularity)
+        return res
+
+
+GROUPS = [
+    PatternGroup([
+        # Batch 0: 4 clusters
+        Pattern('0x49', 0x0000000),
+        Pattern('0x6c', 0x0100000),   # 1M
+        Pattern('0x6f', 0x2000000),   # 32M
+        Pattern('0x76', 0x3ff0000)]), # 64M - 64K
+    PatternGroup([
+        # Batch 1: 6 clusters (3 new)
+        Pattern('0x65', 0x0000000),   # Full overwrite
+        Pattern('0x77', 0x00f8000),   # Partial-left (1M-32K)
+        Pattern('0x72', 0x2008000),   # Partial-right (32M+32K)
+        Pattern('0x69', 0x3fe0000)]), # Adjacent-left (64M - 128K)
+    PatternGroup([
+        # Batch 2: 7 clusters (3 new)
+        Pattern('0x74', 0x0010000),   # Adjacent-right
+        Pattern('0x69', 0x00e8000),   # Partial-left  (1M-96K)
+        Pattern('0x6e', 0x2018000),   # Partial-right (32M+96K)
+        Pattern('0x67', 0x3fe0000,
+                2*GRANULARITY)]),     # Overwrite [(64M-128K)-64M)
+    PatternGroup([
+        # Batch 3: 8 clusters (5 new)
+        # Carefully chosen such that nothing re-dirties the one cluster
+        # that copies out successfully before failure in Group #1.
+        Pattern('0xaa', 0x0010000,
+                3*GRANULARITY),       # Overwrite and 2x Adjacent-right
+        Pattern('0xbb', 0x00d8000),   # Partial-left (1M-160K)
+        Pattern('0xcc', 0x2028000),   # Partial-right (32M+160K)
+        Pattern('0xdd', 0x3fc0000)]), # New; leaving a gap to the right
+]
+
+
+class EmulatedBitmap:
+    def __init__(self, granularity=GRANULARITY):
+        self._bits = set()
+        self.granularity = granularity
+
+    def dirty_bits(self, bits):
+        self._bits |= set(bits)
+
+    def dirty_group(self, n):
+        self.dirty_bits(GROUPS[n].bits(self.granularity))
+
+    def clear(self):
+        self._bits = set()
+
+    def clear_bits(self, bits):
+        self._bits -= set(bits)
+
+    def clear_bit(self, bit):
+        self.clear_bits({bit})
+
+    def clear_group(self, n):
+        self.clear_bits(GROUPS[n].bits(self.granularity))
+
+    @property
+    def first_bit(self):
+        return sorted(self.bits)[0]
+
+    @property
+    def bits(self):
+        return self._bits
+
+    @property
+    def count(self):
+        return len(self.bits)
+
+    def compare(self, qmp_bitmap):
+        """
+        Print a nice human-readable message checking that a bitmap as reported
+        by the QMP interface has as many bits set as we expect it to.
+        """
+
+        name = qmp_bitmap.get('name', '(anonymous)')
+        log("= Checking Bitmap {:s} =".format(name))
+
+        want = self.count
+        have = qmp_bitmap['count'] // qmp_bitmap['granularity']
+
+        log("expecting {:d} dirty sectors; have {:d}. {:s}".format(
+            want, have, "OK!" if want == have else "ERROR!"))
+        log('')
-- 
2.27.0

Re: [PATCH v3 4/6] iotests: move bitmap helpers into their own file

[Vladimir Sementsov-Ogievskiy]

19.06.2020 22:56, Eric Blake wrote:
> From: John Snow <jsnow@redhat.com>
> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> Message-Id: <20200514034922.24834-5-jsnow@redhat.com>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> ---
>   tests/qemu-iotests/257        | 110 +---------------------------
>   tests/qemu-iotests/bitmaps.py | 131 ++++++++++++++++++++++++++++++++++
>   2 files changed, 132 insertions(+), 109 deletions(-)
>   create mode 100644 tests/qemu-iotests/bitmaps.py
> 
> diff --git a/tests/qemu-iotests/257 b/tests/qemu-iotests/257
> index 004a433b8be2..2a81f9e30c56 100755
> --- a/tests/qemu-iotests/257
> +++ b/tests/qemu-iotests/257
> @@ -24,120 +24,12 @@ import os
> 
>   import iotests
>   from iotests import log, qemu_img
> +from bitmaps import EmulatedBitmap, GROUPS

Exporting global variable of some unknown to this module structure doesn't seem
to be good module design. One day we may want to refactor this.. For now:

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>


-- 
Best regards,
Vladimir

[PATCH v3 5/6] iotests: add 298 for block-dirty-bitmap-populate

[Eric Blake]

From: John Snow <jsnow@redhat.com>

Give block-dirty-bitmap-populate a workout.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
 tests/qemu-iotests/298     |  232 ++
 tests/qemu-iotests/298.out | 4544 ++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/group   |    1 +
 3 files changed, 4777 insertions(+)
 create mode 100755 tests/qemu-iotests/298
 create mode 100644 tests/qemu-iotests/298.out

diff --git a/tests/qemu-iotests/298 b/tests/qemu-iotests/298
new file mode 100755
index 000000000000..4bfcecd3bc88
--- /dev/null
+++ b/tests/qemu-iotests/298
@@ -0,0 +1,232 @@
+#!/usr/bin/env python3
+#
+# Test block-dirty-bitmap-populate
+#
+# Copyright (c) 2020 John Snow for Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# owner=jsnow@redhat.com
+
+from collections import namedtuple
+import itertools
+import math
+import os
+
+import iotests
+from iotests import log, qemu_img
+from bitmaps import EmulatedBitmap, GROUPS
+
+SIZE = 64 * 1024 * 1024
+GRANULARITY = 64 * 1024
+
+
+class Drive:
+    def __init__(self, path, vm):
+        self.path = path
+        self.vm = vm
+        self.fmt = None
+        self.size = None
+        self.node = None
+
+    def img_create(self, fmt, size):
+        self.fmt = fmt
+        self.size = size
+        iotests.qemu_img_create('-f', self.fmt, self.path, str(self.size))
+
+
+def block_dirty_bitmap_populate(vm, node, bitmap, job_id, pattern, **kwargs):
+    # Strip any arguments explicitly nulled by the caller:
+    kwargs = {key: val for key, val in kwargs.items() if val is not None}
+    result = vm.qmp_log('block-dirty-bitmap-populate',
+                        node=node,
+                        name=bitmap,
+                        job_id=job_id,
+                        pattern=pattern,
+                        **kwargs)
+    return result
+
+
+def populate(drive, bitmap, job_id, pattern='allocation-top', **kwargs):
+    kwargs.setdefault('pattern', pattern)
+    kwargs.setdefault('auto-finalize', False)
+    kwargs.setdefault('auto-dismiss', False)
+    ret = block_dirty_bitmap_populate(drive.vm, drive.node,
+                                      bitmap, job_id, **kwargs)
+    return {
+        'id': job_id,
+        'auto-finalize': kwargs['auto-finalize'],
+        'auto-dismiss': kwargs['auto-dismiss'],
+        'return': ret,
+    }
+
+
+def perform_writes(drive, n, filter_node_name=None):
+    log("-- Write #{:d}:".format(n))
+    node_name = filter_node_name or drive.node
+    for pattern in GROUPS[n].patterns:
+        cmd = "write -P{:s} 0x{:07x} 0x{:x}".format(
+            pattern.byte,
+            pattern.offset,
+            pattern.size)
+        drive.vm.hmp_qemu_io(node_name, cmd, use_log=True)
+    log('')
+
+
+TestConfig = namedtuple('TestConfig', [
+    'base_pattern',
+    'disabled',
+    'pre_writes',
+    'mid_writes',
+    'cancel',
+    'post_writes',
+])
+
+
+def test_bitmap_populate(config):
+    """
+    Test bitmap populate.
+
+    :param base_pattern: Write a base pattern?
+    :param disabled:     Disable the target bitmap?
+    :param pre_writes:   Write a pattern after bitmap creation, but before job?
+    :param mid_writes:   Write a pattern before job finalizes?
+    :param cancel:       Cancel the job instead of finalizing it?
+    :param post_writes:  Write a pattern after the job?
+    """
+    with iotests.FilePaths(['img']) as (img_path,), iotests.VM() as vm:
+        log("\n=== Bitmap Populate {:s} ===\n".format(str(config)))
+
+        log('-- Prepare image & VM:')
+        drive0 = Drive(img_path, vm=vm)
+        drive0.img_create(iotests.imgfmt, SIZE)
+        vm.add_device("{},id=scsi0".format(iotests.get_virtio_scsi_device()))
+        vm.launch()
+
+        file_config = {
+            'driver': 'file',
+            'filename': drive0.path
+        }
+
+        drive0.node = 'drive0'
+        vm.qmp_log('blockdev-add',
+                   filters=[iotests.filter_qmp_testfiles],
+                   node_name=drive0.node,
+                   driver=drive0.fmt,
+                   file=file_config)
+        log('')
+
+
+        # Step 0: Prepare & Base Allocation Pattern
+
+        if config.base_pattern:
+            perform_writes(drive0, 0)
+
+
+        # Step 1: Add test bitmap
+
+        log('-- Add Bitmap:')
+        vm.qmp_log('block-dirty-bitmap-add',
+                   node=drive0.node,
+                   name="target",
+                   granularity=GRANULARITY,
+                   disabled=config.disabled)
+        ebitmap = EmulatedBitmap()
+        log('')
+
+        # Step 2: Pre-Writes
+
+        if config.pre_writes:
+            perform_writes(drive0, 1)
+            if not config.disabled:
+                ebitmap.dirty_group(1)
+            bitmap = vm.get_bitmap(drive0.node, 'target')
+            ebitmap.compare(bitmap)
+
+
+        # Step 3: Launch job & Mid-Writes
+
+        log('-- Test block-dirty-bitmap-populate (bitpop0):')
+        def pre_finalize():
+            # Writes issued prior to job finalization:
+            if config.mid_writes:
+                perform_writes(drive0, 2)
+                if not config.disabled:
+                    ebitmap.dirty_group(2)
+
+        job = populate(drive0, 'target', 'bitpop0')
+        assert job['return'] == {'return': {}}
+        vm.run_job(job['id'], auto_dismiss=job['auto-dismiss'],
+                   auto_finalize=job['auto-finalize'],
+                   pre_finalize=pre_finalize,
+                   cancel=config.cancel)
+        log('')
+
+
+        # Step 4: Post-job verification
+
+        if not config.cancel:
+            # Any writes made prior to the job finishing should now be visible.
+            if config.base_pattern:
+                ebitmap.dirty_group(0)
+            if config.pre_writes:
+                ebitmap.dirty_group(1)
+            if config.mid_writes:
+                ebitmap.dirty_group(2)
+
+        bitmap = vm.get_bitmap(drive0.node, 'target')
+        ebitmap.compare(bitmap)
+
+
+        # Step 5: Post-Writes
+
+        if config.post_writes:
+            perform_writes(drive0, 3)
+            if not config.disabled:
+                ebitmap.dirty_group(3)
+
+
+        # Step 6: Final Verification
+
+        log('-- Verification:')
+        bitmaps = vm.query_bitmaps()
+        log({'bitmaps': bitmaps}, indent=2)
+        log('')
+        bitmap = vm.get_bitmap(drive0.node, 'target', bitmaps=bitmaps)
+        ebitmap.compare(bitmap)
+
+
+        log('-- Cleanup:')
+        vm.qmp_log("block-dirty-bitmap-remove",
+                   node=drive0.node, name="target")
+
+        bitmaps = vm.query_bitmaps()
+        if bitmaps:
+            log("ERROR: bitmaps unaccounted for:")
+            log(bitmaps)
+        else:
+            log('OK: All bitmaps removed')
+        vm.shutdown()
+        log('')
+
+
+def main():
+    for args in itertools.product((True, False), repeat=6):
+        cfg = TestConfig(*args)
+        test_bitmap_populate(cfg)
+
+
+if __name__ == '__main__':
+    iotests.script_main(main, supported_fmts=['qcow2'],
+                        supported_protocols=['file'])
diff --git a/tests/qemu-iotests/298.out b/tests/qemu-iotests/298.out
new file mode 100644
index 000000000000..7c0afc71920c
--- /dev/null
+++ b/tests/qemu-iotests/298.out
@@ -0,0 +1,4544 @@
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=True, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 262144,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=True, pre_writes=False, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 262144,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 917504,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 14 dirty sectors; have 14. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 393216,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=True, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 786432,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 12 dirty sectors; have 12. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 524288,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 8 dirty sectors; have 8. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 786432,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 12 dirty sectors; have 12. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=True, disabled=False, pre_writes=False, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Write #0:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x49 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6c 0x0100000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6f 0x2000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x76 0x3ff0000 0x10000\""}}
+{"return": ""}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 262144,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 4 dirty sectors; have 4. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 393216,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=True, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 393216,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=True, pre_writes=False, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": true, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": false,
+        "status": "disabled"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 983040,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 15 dirty sectors; have 15. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 655360,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 10 dirty sectors; have 10. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 917504,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 14 dirty sectors; have 14. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 393216,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 917504,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 14 dirty sectors; have 14. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=True, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Write #1:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x65 0x0000000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x77 0x00f8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x72 0x2008000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x3fe0000 0x10000\""}}
+{"return": ""}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 393216,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 6 dirty sectors; have 6. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=True, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 786432,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 12 dirty sectors; have 12. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=True, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=True, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 786432,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 12 dirty sectors; have 12. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=True, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+-- Write #2:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x69 0x00e8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x6e 0x2018000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x67 0x3fe0000 0x20000\""}}
+{"return": ""}
+
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 458752,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 7 dirty sectors; have 7. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=False, cancel=True, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 524288,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 8 dirty sectors; have 8. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=False, cancel=True, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+Job failed: Operation canceled
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_CANCELLED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=False, cancel=False, post_writes=True) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Write #3:
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xaa 0x0010000 0x30000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xbb 0x00d8000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xcc 0x2028000 0x10000\""}}
+{"return": ""}
+{"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0xdd 0x3fc0000 0x10000\""}}
+{"return": ""}
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 524288,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 8 dirty sectors; have 8. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
+
+=== Bitmap Populate TestConfig(base_pattern=False, disabled=False, pre_writes=False, mid_writes=False, cancel=False, post_writes=False) ===
+
+-- Prepare image & VM:
+{"execute": "blockdev-add", "arguments": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-img"}, "node-name": "drive0"}}
+{"return": {}}
+
+-- Add Bitmap:
+{"execute": "block-dirty-bitmap-add", "arguments": {"disabled": false, "granularity": 65536, "name": "target", "node": "drive0"}}
+{"return": {}}
+
+-- Test block-dirty-bitmap-populate (bitpop0):
+{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"return": {}}
+{"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+{"data": {"id": "bitpop0", "type": "bitmap-populate"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"data": {"device": "bitpop0", "len": 67108864, "offset": 67108864, "speed": 0, "type": "bitmap-populate"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
+{"execute": "job-dismiss", "arguments": {"id": "bitpop0"}}
+{"return": {}}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Verification:
+{
+  "bitmaps": {
+    "drive0": [
+      {
+        "busy": false,
+        "count": 0,
+        "granularity": 65536,
+        "name": "target",
+        "persistent": false,
+        "recording": true,
+        "status": "active"
+      }
+    ]
+  }
+}
+
+= Checking Bitmap target =
+expecting 0 dirty sectors; have 0. OK!
+
+-- Cleanup:
+{"execute": "block-dirty-bitmap-remove", "arguments": {"name": "target", "node": "drive0"}}
+{"return": {}}
+OK: All bitmaps removed
+
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index d886fa0cb355..9146aae84081 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -302,3 +302,4 @@
 291 rw quick
 292 rw auto quick
 297 meta
+298 rw
-- 
2.27.0

[PATCH v3 6/6] bitmaps: Use x- prefix for block-dirty-bitmap-popluate

[Eric Blake]

Give ourselves an out if we need to tweak the interface, in order to
gain more experience with what works when libvirt experiments with
using it.

Signed-off-by: Eric Blake <eblake@redhat.com>
---
 qapi/block-core.json       |   6 +-
 qapi/transaction.json      |   4 +-
 blockdev.c                 |  14 ++--
 tests/qemu-iotests/298     |   2 +-
 tests/qemu-iotests/298.out | 128 ++++++++++++++++++-------------------
 5 files changed, 77 insertions(+), 77 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 313583b47c16..dcf6b907e45c 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2260,7 +2260,7 @@
             '*auto-dismiss': 'bool' } }

 ##
-# @block-dirty-bitmap-populate:
+# @x-block-dirty-bitmap-populate:
 #
 # Creates a new job that writes a pattern into a dirty bitmap.
 #
@@ -2268,13 +2268,13 @@
 #
 # Example:
 #
-# -> { "execute": "block-dirty-bitmap-populate",
+# -> { "execute": "x-block-dirty-bitmap-populate",
 #      "arguments": { "node": "drive0", "target": "bitmap0",
 #                     "job-id": "job0", "pattern": "allocate-top" } }
 # <- { "return": {} }
 #
 ##
-{ 'command': 'block-dirty-bitmap-populate', 'boxed': true,
+{ 'command': 'x-block-dirty-bitmap-populate', 'boxed': true,
   'data': 'BlockDirtyBitmapPopulate' }

 ##
diff --git a/qapi/transaction.json b/qapi/transaction.json
index 21be59faae56..3277e948f321 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -50,7 +50,7 @@
 # - @block-dirty-bitmap-enable: since 4.0
 # - @block-dirty-bitmap-disable: since 4.0
 # - @block-dirty-bitmap-merge: since 4.0
-# - @block-dirty-bitmap-populate: since 5.1
+# - @x-block-dirty-bitmap-populate: since 5.1
 # - @blockdev-backup: since 2.3
 # - @blockdev-snapshot: since 2.5
 # - @blockdev-snapshot-internal-sync: since 1.7
@@ -68,7 +68,7 @@
        'block-dirty-bitmap-enable': 'BlockDirtyBitmap',
        'block-dirty-bitmap-disable': 'BlockDirtyBitmap',
        'block-dirty-bitmap-merge': 'BlockDirtyBitmapMerge',
-       'block-dirty-bitmap-populate': 'BlockDirtyBitmapPopulate',
+       'x-block-dirty-bitmap-populate': 'BlockDirtyBitmapPopulate',
        'blockdev-backup': 'BlockdevBackup',
        'blockdev-snapshot': 'BlockdevSnapshot',
        'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
diff --git a/blockdev.c b/blockdev.c
index d072519e7b91..b86ef5b7f281 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2188,8 +2188,8 @@ static void block_dirty_bitmap_populate_prepare(BlkActionState *common,
     int job_flags = JOB_DEFAULT;

     assert(common->action->type ==
-           TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE);
-    bitpop = common->action->u.block_dirty_bitmap_populate.data;
+           TRANSACTION_ACTION_KIND_X_BLOCK_DIRTY_BITMAP_POPULATE);
+    bitpop = common->action->u.x_block_dirty_bitmap_populate.data;

     bmap = block_dirty_bitmap_lookup(bitpop->node, bitpop->name, &bs, errp);
     if (!bmap) {
@@ -2317,7 +2317,7 @@ static const BlkActionOps actions[] = {
         .commit = block_dirty_bitmap_remove_commit,
         .abort = block_dirty_bitmap_remove_abort,
     },
-    [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE] = {
+    [TRANSACTION_ACTION_KIND_X_BLOCK_DIRTY_BITMAP_POPULATE] = {
         .instance_size = sizeof(BlockJobActionState),
         .prepare = block_dirty_bitmap_populate_prepare,
         .commit = blockdev_backup_commit,
@@ -2443,12 +2443,12 @@ void qmp_block_passwd(bool has_device, const char *device,
                "Setting block passwords directly is no longer supported");
 }

-void qmp_block_dirty_bitmap_populate(BlockDirtyBitmapPopulate *bitpop,
-                                     Error **errp)
+void qmp_x_block_dirty_bitmap_populate(BlockDirtyBitmapPopulate *bitpop,
+                                       Error **errp)
 {
     TransactionAction action = {
-        .type = TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_POPULATE,
-        .u.block_dirty_bitmap_populate.data = bitpop,
+        .type = TRANSACTION_ACTION_KIND_X_BLOCK_DIRTY_BITMAP_POPULATE,
+        .u.x_block_dirty_bitmap_populate.data = bitpop,
     };
     blockdev_do_action(&action, errp);
 }
diff --git a/tests/qemu-iotests/298 b/tests/qemu-iotests/298
index 4bfcecd3bc88..2a3df2de85db 100755
--- a/tests/qemu-iotests/298
+++ b/tests/qemu-iotests/298
@@ -49,7 +49,7 @@ class Drive:
 def block_dirty_bitmap_populate(vm, node, bitmap, job_id, pattern, **kwargs):
     # Strip any arguments explicitly nulled by the caller:
     kwargs = {key: val for key, val in kwargs.items() if val is not None}
-    result = vm.qmp_log('block-dirty-bitmap-populate',
+    result = vm.qmp_log('x-block-dirty-bitmap-populate',
                         node=node,
                         name=bitmap,
                         job_id=job_id,
diff --git a/tests/qemu-iotests/298.out b/tests/qemu-iotests/298.out
index 7c0afc71920c..8b75f0e516c0 100644
--- a/tests/qemu-iotests/298.out
+++ b/tests/qemu-iotests/298.out
@@ -33,7 +33,7 @@
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -126,7 +126,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -209,7 +209,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -301,7 +301,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -383,7 +383,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -466,7 +466,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -539,7 +539,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -621,7 +621,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -680,7 +680,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -760,7 +760,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -830,7 +830,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -909,7 +909,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -978,7 +978,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1048,7 +1048,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1108,7 +1108,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1177,7 +1177,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1249,7 +1249,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -1342,7 +1342,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -1425,7 +1425,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -1517,7 +1517,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -1599,7 +1599,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1682,7 +1682,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1755,7 +1755,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1837,7 +1837,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -1896,7 +1896,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -1976,7 +1976,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2046,7 +2046,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2125,7 +2125,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2194,7 +2194,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2264,7 +2264,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2324,7 +2324,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2393,7 +2393,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2455,7 +2455,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2538,7 +2538,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2611,7 +2611,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2693,7 +2693,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -2765,7 +2765,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2838,7 +2838,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2901,7 +2901,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -2973,7 +2973,7 @@ OK: All bitmaps removed
 expecting 0 dirty sectors; have 0. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3022,7 +3022,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3092,7 +3092,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3152,7 +3152,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3221,7 +3221,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3280,7 +3280,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3340,7 +3340,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3390,7 +3390,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3449,7 +3449,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3511,7 +3511,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3594,7 +3594,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3667,7 +3667,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3749,7 +3749,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -3821,7 +3821,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3894,7 +3894,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -3957,7 +3957,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -4029,7 +4029,7 @@ OK: All bitmaps removed
 expecting 6 dirty sectors; have 6. OK!

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -4078,7 +4078,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -4148,7 +4148,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -4208,7 +4208,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -4277,7 +4277,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 -- Write #2:
 {"execute": "human-monitor-command", "arguments": {"command-line": "qemu-io drive0 \"write -P0x74 0x0010000 0x10000\""}}
@@ -4336,7 +4336,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -4396,7 +4396,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-cancel", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -4446,7 +4446,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
@@ -4505,7 +4505,7 @@ OK: All bitmaps removed
 {"return": {}}

 -- Test block-dirty-bitmap-populate (bitpop0):
-{"execute": "block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
+{"execute": "x-block-dirty-bitmap-populate", "arguments": {"auto-dismiss": false, "auto-finalize": false, "job-id": "bitpop0", "name": "target", "node": "drive0", "pattern": "allocation-top"}}
 {"return": {}}
 {"execute": "job-finalize", "arguments": {"id": "bitpop0"}}
 {"return": {}}
-- 
2.27.0

Re: [PATCH v3 6/6] bitmaps: Use x- prefix for block-dirty-bitmap-popluate

[Kevin Wolf]

Am 19.06.2020 um 21:56 hat Eric Blake geschrieben:
> Give ourselves an out if we need to tweak the interface, in order to
> gain more experience with what works when libvirt experiments with
> using it.
> 
> Signed-off-by: Eric Blake <eblake@redhat.com>

I thought libvirt wants to consume this as soon as possible? With an x-
prefix, we'll prevent it from using the interface.

Kevin

Re: [PATCH v3 0/6] block: add block-dirty-bitmap-populate job

[Kevin Wolf]

Am 19.06.2020 um 21:56 hat Eric Blake geschrieben:
> [From John's original cover letter:]
> This is a new (very small) block job that writes a pattern into a
> bitmap. The only pattern implemented is the top allocation information.
> 
> This can be used to "recover" an incremental bitmap chain if an external
> snapshot was taken without creating a new bitmap first: any writes made
> to the image will be reflected by the allocation status and can be
> written back into a bitmap.
> 
> This is useful for e.g. libvirt managing backup chains if a user creates
> an external snapshot outside of libvirt.
> 
> v3:
>  - Addressed a bit more feedback
>  - Make it easier to decide if we want an x- prefix if we think there
>  are more tweaks to be made to the interface
>  - Drop dependency on John's JobRunner iotest series
>  - Renumber the new iotest
> 
> I know there was a lot of discussion about whether there are
> optimizations to be made with populating directly into the target
> bitmap rather than into a temporary that then gets merged in at the
> completion of the job, but the QMP aspect seems fairly stable.  Even
> so, we may still want to consider using an x- prefix until we know for
> sure whether libvirt can make decent use of the interface.

Fair enough, as long as everyone agrees that the QMP aspect includes
that merging the bits only at the end of the job is an implementation
detail and not something that client may rely on.

Kevin