* [PATCH 01/10] ARM: dts: r8a7779: Add SYSC PM Domains
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up ARM CPU cores 1-3 to their respective PM Domains.
Note that ARM CPU core 0 cannot be shut off.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c1d48d712a1..e02875a8c040 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/r8a7779-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7779-sysc.h>
/ {
compatible = "renesas,r8a7779";
@@ -34,18 +35,21 @@
compatible = "arm,cortex-a9";
reg = <1>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM3>;
};
};
@@ -586,4 +590,10 @@
"mmc1", "mmc0";
};
};
+
+ sysc: system-controller@ffd85000 {
+ compatible = "renesas,r8a7779-sysc";
+ reg = <0xffd85000 0x0200>;
+ #power-domain-cells = <1>;
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 01/10] ARM: dts: r8a7779: Add SYSC PM Domains
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up ARM CPU cores 1-3 to their respective PM Domains.
Note that ARM CPU core 0 cannot be shut off.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c1d48d712a1..e02875a8c040 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/r8a7779-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7779-sysc.h>
/ {
compatible = "renesas,r8a7779";
@@ -34,18 +35,21 @@
compatible = "arm,cortex-a9";
reg = <1>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM1>;
};
cpu at 2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM2>;
};
cpu at 3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7779_PD_ARM3>;
};
};
@@ -586,4 +590,10 @@
"mmc1", "mmc0";
};
};
+
+ sysc: system-controller at ffd85000 {
+ compatible = "renesas,r8a7779-sysc";
+ reg = <0xffd85000 0x0200>;
+ #power-domain-cells = <1>;
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 02/10] ARM: dts: r8a7790: Add SYSC PM Domains
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A15 and Cortex-A7 CPU cores and L2 caches/SCUs to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 776a2aed81d2..36c91d921771 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/clock/r8a7790-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7790-sysc.h>
/ {
compatible = "renesas,r8a7790";
@@ -52,6 +53,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -68,6 +70,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
@@ -76,6 +79,7 @@
compatible = "arm,cortex-a15";
reg = <2>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
next-level-cache = <&L2_CA15>;
};
@@ -84,6 +88,7 @@
compatible = "arm,cortex-a15";
reg = <3>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
next-level-cache = <&L2_CA15>;
};
@@ -92,6 +97,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -100,6 +106,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
@@ -108,6 +115,7 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
next-level-cache = <&L2_CA7>;
};
@@ -116,6 +124,7 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
};
};
@@ -141,12 +150,14 @@
L2_CA15: cache-controller@0 {
compatible = "cache";
+ power-domains = <&sysc R8A7790_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
L2_CA7: cache-controller@1 {
compatible = "cache";
+ power-domains = <&sysc R8A7790_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1450,6 +1461,12 @@
};
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7790-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 02/10] ARM: dts: r8a7790: Add SYSC PM Domains
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A15 and Cortex-A7 CPU cores and L2 caches/SCUs to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 776a2aed81d2..36c91d921771 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/clock/r8a7790-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7790-sysc.h>
/ {
compatible = "renesas,r8a7790";
@@ -52,6 +53,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -68,6 +70,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
@@ -76,6 +79,7 @@
compatible = "arm,cortex-a15";
reg = <2>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
next-level-cache = <&L2_CA15>;
};
@@ -84,6 +88,7 @@
compatible = "arm,cortex-a15";
reg = <3>;
clock-frequency = <1300000000>;
+ power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
next-level-cache = <&L2_CA15>;
};
@@ -92,6 +97,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -100,6 +106,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
@@ -108,6 +115,7 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
next-level-cache = <&L2_CA7>;
};
@@ -116,6 +124,7 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <780000000>;
+ power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
};
};
@@ -141,12 +150,14 @@
L2_CA15: cache-controller at 0 {
compatible = "cache";
+ power-domains = <&sysc R8A7790_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
L2_CA7: cache-controller at 1 {
compatible = "cache";
+ power-domains = <&sysc R8A7790_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1450,6 +1461,12 @@
};
};
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7790-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 03/10] ARM: dts: r8a7791: Add SYSC PM Domains
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A15 CPU cores and the Cortex-A15 L2 cache/SCU to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6d4a0b6e4df9..e30200c9476a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/clock/r8a7791-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7791-sysc.h>
/ {
compatible = "renesas,r8a7791";
@@ -51,6 +52,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7791_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -67,6 +69,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1500000000>;
+ power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
};
@@ -92,6 +95,7 @@
L2_CA15: cache-controller@0 {
compatible = "cache";
+ power-domains = <&sysc R8A7791_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1466,6 +1470,12 @@
};
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7791-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 03/10] ARM: dts: r8a7791: Add SYSC PM Domains
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A15 CPU cores and the Cortex-A15 L2 cache/SCU to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6d4a0b6e4df9..e30200c9476a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/clock/r8a7791-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7791-sysc.h>
/ {
compatible = "renesas,r8a7791";
@@ -51,6 +52,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7791_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -67,6 +69,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1500000000>;
+ power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
};
@@ -92,6 +95,7 @@
L2_CA15: cache-controller at 0 {
compatible = "cache";
+ power-domains = <&sysc R8A7791_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1466,6 +1470,12 @@
};
};
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7791-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 04/10] ARM: dts: r8a7793: Add SYSC PM Domains
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the first Cortex-A15 CPU core and the Cortex-A15 L2 cache/SCU to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6186179fd66d..53e235e3279d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/r8a7793-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7793-sysc.h>
/ {
compatible = "renesas,r8a7793";
@@ -43,6 +44,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7793_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1500000 1000000>,
@@ -76,6 +78,7 @@
L2_CA15: cache-controller@0 {
compatible = "cache";
+ power-domains = <&sysc R8A7793_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1223,6 +1226,12 @@
};
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7793-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
ipmmu_sy0: mmu@e6280000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 04/10] ARM: dts: r8a7793: Add SYSC PM Domains
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the first Cortex-A15 CPU core and the Cortex-A15 L2 cache/SCU to
their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6186179fd66d..53e235e3279d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/r8a7793-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7793-sysc.h>
/ {
compatible = "renesas,r8a7793";
@@ -43,6 +44,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7793_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1500000 1000000>,
@@ -76,6 +78,7 @@
L2_CA15: cache-controller at 0 {
compatible = "cache";
+ power-domains = <&sysc R8A7793_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1223,6 +1226,12 @@
};
};
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7793-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 05/10] ARM: dts: r8a7794: Add SYSC PM Domains
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A7 CPU cores and the Cortex-A7 L2 cache/SCU to their
respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b0bce43779f1..70eff80a813e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/clock/r8a7794-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7794-sysc.h>
/ {
compatible = "renesas,r8a7794";
@@ -42,6 +43,7 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -50,12 +52,14 @@
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
};
L2_CA7: cache-controller@1 {
compatible = "cache";
+ power-domains = <&sysc R8A7794_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1215,6 +1219,12 @@
};
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7794-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
ipmmu_sy0: mmu@e6280000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 05/10] ARM: dts: r8a7794: Add SYSC PM Domains
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller.
Hook up the Cortex-A7 CPU cores and the Cortex-A7 L2 cache/SCU to their
respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b0bce43779f1..70eff80a813e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/clock/r8a7794-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7794-sysc.h>
/ {
compatible = "renesas,r8a7794";
@@ -42,6 +43,7 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -50,12 +52,14 @@
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
};
L2_CA7: cache-controller at 1 {
compatible = "cache";
+ power-domains = <&sysc R8A7794_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -1215,6 +1219,12 @@
};
};
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7794-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 06/10] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 44 +++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index e02875a8c040..d43e3b2105ae 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -177,7 +177,7 @@
reg = <0xffc70000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -188,7 +188,7 @@
reg = <0xffc71000 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -199,7 +199,7 @@
reg = <0xffc72000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -210,7 +210,7 @@
reg = <0xffc73000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -222,7 +222,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -234,7 +234,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -246,7 +246,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -258,7 +258,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -270,7 +270,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -282,7 +282,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -304,7 +304,7 @@
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -319,7 +319,7 @@
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -334,7 +334,7 @@
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -346,7 +346,7 @@
reg = <0xfc600000 0x2000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
};
sdhi0: sd@ffe4c000 {
@@ -354,7 +354,7 @@
reg = <0xffe4c000 0x100>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -363,7 +363,7 @@
reg = <0xffe4d000 0x100>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -372,7 +372,7 @@
reg = <0xffe4e000 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -381,7 +381,7 @@
reg = <0xffe4f000 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -392,7 +392,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -403,7 +403,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -414,7 +414,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -423,7 +423,7 @@
reg = <0 0xfff80000 0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
ports {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 06/10] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 44 +++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index e02875a8c040..d43e3b2105ae 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -177,7 +177,7 @@
reg = <0xffc70000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -188,7 +188,7 @@
reg = <0xffc71000 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -199,7 +199,7 @@
reg = <0xffc72000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -210,7 +210,7 @@
reg = <0xffc73000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -222,7 +222,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -234,7 +234,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -246,7 +246,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -258,7 +258,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -270,7 +270,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -282,7 +282,7 @@
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
<&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -304,7 +304,7 @@
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -319,7 +319,7 @@
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -334,7 +334,7 @@
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
#renesas,channels = <3>;
@@ -346,7 +346,7 @@
reg = <0xfc600000 0x2000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
};
sdhi0: sd at ffe4c000 {
@@ -354,7 +354,7 @@
reg = <0xffe4c000 0x100>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -363,7 +363,7 @@
reg = <0xffe4d000 0x100>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -372,7 +372,7 @@
reg = <0xffe4e000 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -381,7 +381,7 @@
reg = <0xffe4f000 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -392,7 +392,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -403,7 +403,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -414,7 +414,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -423,7 +423,7 @@
reg = <0 0xfff80000 0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
ports {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: arm
Cc: linux-renesas-soc, Olof Johansson, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm, Simon Horman
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
This pull requests is based on a merge of:
* "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
pulled.
* "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
tagged as renesas-dt-for-v4.7, which you have also already pulled.
The reason for the somewhat tedious base on
renesas-rcar-sysc2-for-v4.7, which provides driver changes,
is a hard run-time dependency.
I also have a similar set of changes for arm64 which I will send separately.
The following changes since commit 03ef285fd75f0a47461048832367ea71ec1bc65b:
Merge tag 'renesas-rcar-sysc2-for-v4.7' into dt-pm-domain-for-v4.7 (2016-04-27 11:35:26 +1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-pm-domain-for-v4.7
for you to fetch changes up to 25611e4ef5bb290805305d499715a840826462f3:
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain (2016-04-27 14:16:18 +1000)
----------------------------------------------------------------
Renesas ARM Based SoC DT PM Domain Updates for v4.7
* Add SYSC PM Domains to DT for R-Car Gen 1 and 2 SoCs
----------------------------------------------------------------
Geert Uytterhoeven (10):
ARM: dts: r8a7779: Add SYSC PM Domains
ARM: dts: r8a7790: Add SYSC PM Domains
ARM: dts: r8a7791: Add SYSC PM Domains
ARM: dts: r8a7793: Add SYSC PM Domains
ARM: dts: r8a7794: Add SYSC PM Domains
ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
arch/arm/boot/dts/r8a7779.dtsi | 54 ++++++++------
arch/arm/boot/dts/r8a7790.dtsi | 155 ++++++++++++++++++++++------------------
arch/arm/boot/dts/r8a7791.dtsi | 156 ++++++++++++++++++++++-------------------
arch/arm/boot/dts/r8a7793.dtsi | 111 +++++++++++++++--------------
arch/arm/boot/dts/r8a7794.dtsi | 116 ++++++++++++++++--------------
5 files changed, 324 insertions(+), 268 deletions(-)
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 07/10] ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 138 ++++++++++++++++++++---------------------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 36c91d921771..dc8497b15586 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -184,7 +184,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -197,7 +197,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -210,7 +210,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -223,7 +223,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -236,7 +236,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -249,7 +249,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
thermal: thermal@e61f0000 {
@@ -259,7 +259,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -278,7 +278,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -298,7 +298,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -315,7 +315,7 @@
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
@@ -344,7 +344,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -375,7 +375,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -404,7 +404,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -433,7 +433,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -445,7 +445,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -457,7 +457,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -469,7 +469,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -481,7 +481,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -493,7 +493,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -505,7 +505,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -519,7 +519,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -532,7 +532,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -545,7 +545,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -558,7 +558,7 @@
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -569,7 +569,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -582,7 +582,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -601,7 +601,7 @@
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
max-frequency = <195000000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -613,7 +613,7 @@
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
max-frequency = <195000000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -625,7 +625,7 @@
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
max-frequency = <97500000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -637,7 +637,7 @@
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
max-frequency = <97500000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -650,7 +650,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -663,7 +663,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -676,7 +676,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -689,7 +689,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -702,7 +702,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -715,7 +715,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -729,7 +729,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -743,7 +743,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -757,7 +757,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -771,7 +771,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -785,7 +785,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -794,7 +794,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -807,7 +807,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -818,7 +818,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -827,7 +827,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -839,7 +839,7 @@
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -853,7 +853,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel@0 {
@@ -871,7 +871,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -880,7 +880,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -889,7 +889,7 @@
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -898,7 +898,7 @@
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -907,7 +907,7 @@
reg = <0 0xfe920000 0 0x8000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-sru;
renesas,#rpf = <5>;
@@ -920,7 +920,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lut;
renesas,has-sru;
@@ -934,7 +934,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -948,7 +948,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -1003,7 +1003,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1014,7 +1014,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1023,7 +1023,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
clocks {
@@ -1474,7 +1474,7 @@
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1488,7 +1488,7 @@
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1501,7 +1501,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1514,7 +1514,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1527,7 +1527,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1538,7 +1538,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1551,7 +1551,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -1586,7 +1586,7 @@
<0 0xee0a0000 0 0x1100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -1604,7 +1604,7 @@
compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1657,7 +1657,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1700,7 +1700,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
This pull requests is based on a merge of:
* "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
pulled.
* "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
tagged as renesas-dt-for-v4.7, which you have also already pulled.
The reason for the somewhat tedious base on
renesas-rcar-sysc2-for-v4.7, which provides driver changes,
is a hard run-time dependency.
I also have a similar set of changes for arm64 which I will send separately.
The following changes since commit 03ef285fd75f0a47461048832367ea71ec1bc65b:
Merge tag 'renesas-rcar-sysc2-for-v4.7' into dt-pm-domain-for-v4.7 (2016-04-27 11:35:26 +1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-pm-domain-for-v4.7
for you to fetch changes up to 25611e4ef5bb290805305d499715a840826462f3:
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain (2016-04-27 14:16:18 +1000)
----------------------------------------------------------------
Renesas ARM Based SoC DT PM Domain Updates for v4.7
* Add SYSC PM Domains to DT for R-Car Gen 1 and 2 SoCs
----------------------------------------------------------------
Geert Uytterhoeven (10):
ARM: dts: r8a7779: Add SYSC PM Domains
ARM: dts: r8a7790: Add SYSC PM Domains
ARM: dts: r8a7791: Add SYSC PM Domains
ARM: dts: r8a7793: Add SYSC PM Domains
ARM: dts: r8a7794: Add SYSC PM Domains
ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
arch/arm/boot/dts/r8a7779.dtsi | 54 ++++++++------
arch/arm/boot/dts/r8a7790.dtsi | 155 ++++++++++++++++++++++------------------
arch/arm/boot/dts/r8a7791.dtsi | 156 ++++++++++++++++++++++-------------------
arch/arm/boot/dts/r8a7793.dtsi | 111 +++++++++++++++--------------
arch/arm/boot/dts/r8a7794.dtsi | 116 ++++++++++++++++--------------
5 files changed, 324 insertions(+), 268 deletions(-)
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 07/10] ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 138 ++++++++++++++++++++---------------------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 36c91d921771..dc8497b15586 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -184,7 +184,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio1: gpio at e6051000 {
@@ -197,7 +197,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio2: gpio at e6052000 {
@@ -210,7 +210,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio3: gpio at e6053000 {
@@ -223,7 +223,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio4: gpio at e6054000 {
@@ -236,7 +236,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio5: gpio at e6055000 {
@@ -249,7 +249,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
thermal: thermal at e61f0000 {
@@ -259,7 +259,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -278,7 +278,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -298,7 +298,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -315,7 +315,7 @@
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
dmac0: dma-controller at e6700000 {
@@ -344,7 +344,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -375,7 +375,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -404,7 +404,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -433,7 +433,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -445,7 +445,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -457,7 +457,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -469,7 +469,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -481,7 +481,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -493,7 +493,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -505,7 +505,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -519,7 +519,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -532,7 +532,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -545,7 +545,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -558,7 +558,7 @@
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -569,7 +569,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -582,7 +582,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -601,7 +601,7 @@
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
max-frequency = <195000000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -613,7 +613,7 @@
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
max-frequency = <195000000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -625,7 +625,7 @@
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
max-frequency = <97500000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -637,7 +637,7 @@
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
max-frequency = <97500000>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -650,7 +650,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -663,7 +663,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -676,7 +676,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -689,7 +689,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -702,7 +702,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -715,7 +715,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -729,7 +729,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -743,7 +743,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -757,7 +757,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -771,7 +771,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -785,7 +785,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -794,7 +794,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -807,7 +807,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -818,7 +818,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -827,7 +827,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -839,7 +839,7 @@
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -853,7 +853,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel at 0 {
@@ -871,7 +871,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -880,7 +880,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -889,7 +889,7 @@
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -898,7 +898,7 @@
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -907,7 +907,7 @@
reg = <0 0xfe920000 0 0x8000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-sru;
renesas,#rpf = <5>;
@@ -920,7 +920,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lut;
renesas,has-sru;
@@ -934,7 +934,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -948,7 +948,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -1003,7 +1003,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1014,7 +1014,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1023,7 +1023,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
clocks {
@@ -1474,7 +1474,7 @@
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1488,7 +1488,7 @@
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1501,7 +1501,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1514,7 +1514,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1527,7 +1527,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1538,7 +1538,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1551,7 +1551,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -1586,7 +1586,7 @@
<0 0xee0a0000 0 0x1100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -1604,7 +1604,7 @@
compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1657,7 +1657,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1700,7 +1700,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 08/10] ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 146 ++++++++++++++++++++---------------------
1 file changed, 73 insertions(+), 73 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e30200c9476a..c40f950dfc19 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -122,7 +122,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -135,7 +135,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -148,7 +148,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -161,7 +161,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -174,7 +174,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -187,7 +187,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
@@ -200,7 +200,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
@@ -213,7 +213,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
thermal: thermal@e61f0000 {
@@ -223,7 +223,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -242,7 +242,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -262,7 +262,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -285,7 +285,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
@@ -314,7 +314,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -345,7 +345,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -374,7 +374,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -403,7 +403,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -415,7 +415,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -427,7 +427,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -440,7 +440,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -452,7 +452,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -464,7 +464,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -476,7 +476,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -488,7 +488,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -501,7 +501,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -516,7 +516,7 @@
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -529,7 +529,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -542,7 +542,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -558,7 +558,7 @@
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -571,7 +571,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -582,7 +582,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -593,7 +593,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -606,7 +606,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -619,7 +619,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -632,7 +632,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -645,7 +645,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -658,7 +658,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -671,7 +671,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -684,7 +684,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -697,7 +697,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -710,7 +710,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -724,7 +724,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -738,7 +738,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -752,7 +752,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -766,7 +766,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -780,7 +780,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -794,7 +794,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -808,7 +808,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -822,7 +822,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -836,7 +836,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -845,7 +845,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -858,7 +858,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -869,7 +869,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -878,7 +878,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -890,7 +890,7 @@
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -904,7 +904,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel@0 {
@@ -922,7 +922,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -931,7 +931,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -940,7 +940,7 @@
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -949,7 +949,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lut;
renesas,has-sru;
@@ -963,7 +963,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -977,7 +977,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -1023,7 +1023,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1034,7 +1034,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1043,7 +1043,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
clocks {
@@ -1483,7 +1483,7 @@
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1497,7 +1497,7 @@
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1510,7 +1510,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1523,7 +1523,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1534,7 +1534,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1547,7 +1547,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -1582,7 +1582,7 @@
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -1632,7 +1632,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1735,7 +1735,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 08/10] ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 146 ++++++++++++++++++++---------------------
1 file changed, 73 insertions(+), 73 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e30200c9476a..c40f950dfc19 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -122,7 +122,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio1: gpio at e6051000 {
@@ -135,7 +135,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio2: gpio at e6052000 {
@@ -148,7 +148,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio3: gpio at e6053000 {
@@ -161,7 +161,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio4: gpio at e6054000 {
@@ -174,7 +174,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio5: gpio at e6055000 {
@@ -187,7 +187,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio6: gpio at e6055400 {
@@ -200,7 +200,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio7: gpio at e6055800 {
@@ -213,7 +213,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
thermal: thermal at e61f0000 {
@@ -223,7 +223,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -242,7 +242,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -262,7 +262,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -285,7 +285,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
dmac0: dma-controller at e6700000 {
@@ -314,7 +314,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -345,7 +345,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -374,7 +374,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -403,7 +403,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -415,7 +415,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -427,7 +427,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -440,7 +440,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -452,7 +452,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -464,7 +464,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -476,7 +476,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -488,7 +488,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -501,7 +501,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -516,7 +516,7 @@
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -529,7 +529,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -542,7 +542,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -558,7 +558,7 @@
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -571,7 +571,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -582,7 +582,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -593,7 +593,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -606,7 +606,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -619,7 +619,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -632,7 +632,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -645,7 +645,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -658,7 +658,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -671,7 +671,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -684,7 +684,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -697,7 +697,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -710,7 +710,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -724,7 +724,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -738,7 +738,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -752,7 +752,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -766,7 +766,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -780,7 +780,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -794,7 +794,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -808,7 +808,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -822,7 +822,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -836,7 +836,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -845,7 +845,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -858,7 +858,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -869,7 +869,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -878,7 +878,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -890,7 +890,7 @@
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -904,7 +904,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel at 0 {
@@ -922,7 +922,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -931,7 +931,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -940,7 +940,7 @@
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -949,7 +949,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lut;
renesas,has-sru;
@@ -963,7 +963,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -977,7 +977,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
@@ -1023,7 +1023,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1034,7 +1034,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1043,7 +1043,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
clocks {
@@ -1483,7 +1483,7 @@
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1497,7 +1497,7 @@
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1510,7 +1510,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1523,7 +1523,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1534,7 +1534,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1547,7 +1547,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -1582,7 +1582,7 @@
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -1632,7 +1632,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1735,7 +1735,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 09/10] ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 102 ++++++++++++++++++++---------------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 53e235e3279d..2abf2e489699 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -105,7 +105,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -118,7 +118,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -131,7 +131,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -144,7 +144,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -157,7 +157,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -170,7 +170,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
@@ -183,7 +183,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
@@ -196,7 +196,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
thermal: thermal@e61f0000 {
@@ -206,7 +206,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -225,7 +225,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -245,7 +245,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -268,7 +268,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
@@ -297,7 +297,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -328,7 +328,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -357,7 +357,7 @@
"ch12";
clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -386,7 +386,7 @@
"ch12";
clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -399,7 +399,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -411,7 +411,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -423,7 +423,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -435,7 +435,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -447,7 +447,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -460,7 +460,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -475,7 +475,7 @@
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -488,7 +488,7 @@
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -501,7 +501,7 @@
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -517,7 +517,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -528,7 +528,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -539,7 +539,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -552,7 +552,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -565,7 +565,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -578,7 +578,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -591,7 +591,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -604,7 +604,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -617,7 +617,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -630,7 +630,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -643,7 +643,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -656,7 +656,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -670,7 +670,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -684,7 +684,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -698,7 +698,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -712,7 +712,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -726,7 +726,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -740,7 +740,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -754,7 +754,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -768,7 +768,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -782,7 +782,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -791,7 +791,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -805,7 +805,7 @@
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -849,7 +849,7 @@
clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
<&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -860,7 +860,7 @@
clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
<&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1327,7 +1327,7 @@
"src.4", "src.3", "src.2", "src.1", "src.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 09/10] ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 102 ++++++++++++++++++++---------------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 53e235e3279d..2abf2e489699 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -105,7 +105,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio1: gpio at e6051000 {
@@ -118,7 +118,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio2: gpio at e6052000 {
@@ -131,7 +131,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio3: gpio at e6053000 {
@@ -144,7 +144,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio4: gpio at e6054000 {
@@ -157,7 +157,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio5: gpio at e6055000 {
@@ -170,7 +170,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio6: gpio at e6055400 {
@@ -183,7 +183,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio7: gpio at e6055800 {
@@ -196,7 +196,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
thermal: thermal at e61f0000 {
@@ -206,7 +206,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
@@ -225,7 +225,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -245,7 +245,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -268,7 +268,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
dmac0: dma-controller at e6700000 {
@@ -297,7 +297,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -328,7 +328,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -357,7 +357,7 @@
"ch12";
clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -386,7 +386,7 @@
"ch12";
clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -399,7 +399,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -411,7 +411,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -423,7 +423,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -435,7 +435,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -447,7 +447,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -460,7 +460,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -475,7 +475,7 @@
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -488,7 +488,7 @@
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -501,7 +501,7 @@
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -517,7 +517,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -528,7 +528,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -539,7 +539,7 @@
clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -552,7 +552,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -565,7 +565,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -578,7 +578,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -591,7 +591,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -604,7 +604,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -617,7 +617,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -630,7 +630,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -643,7 +643,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -656,7 +656,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -670,7 +670,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -684,7 +684,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -698,7 +698,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -712,7 +712,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -726,7 +726,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -740,7 +740,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -754,7 +754,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -768,7 +768,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -782,7 +782,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -791,7 +791,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -805,7 +805,7 @@
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -849,7 +849,7 @@
clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
<&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -860,7 +860,7 @@
clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
<&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1327,7 +1327,7 @@
"src.4", "src.3", "src.2", "src.1", "src.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 10/10] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
2016-04-27 4:20 ` Simon Horman
@ 2016-04-27 4:20 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 106 ++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 70eff80a813e..136911c1dc74 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -86,7 +86,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -99,7 +99,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -112,7 +112,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -125,7 +125,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -138,7 +138,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -151,7 +151,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
@@ -164,7 +164,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
cmt0: timer@ffca0000 {
@@ -174,7 +174,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -194,7 +194,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -225,7 +225,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
pfc: pin-controller@e6060000 {
@@ -259,7 +259,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -290,7 +290,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -304,7 +304,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -317,7 +317,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -330,7 +330,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -343,7 +343,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -356,7 +356,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -369,7 +369,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -382,7 +382,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -395,7 +395,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -408,7 +408,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -422,7 +422,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -436,7 +436,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -450,7 +450,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -464,7 +464,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -478,7 +478,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -492,7 +492,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -506,7 +506,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -520,7 +520,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -534,7 +534,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -543,7 +543,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -556,7 +556,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -568,7 +568,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -580,7 +580,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -592,7 +592,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -604,7 +604,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -616,7 +616,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -628,7 +628,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -642,7 +642,7 @@
clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -655,7 +655,7 @@
clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -668,7 +668,7 @@
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
};
@@ -678,7 +678,7 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -687,7 +687,7 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -696,7 +696,7 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -707,7 +707,7 @@
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -719,7 +719,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -728,7 +728,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -739,7 +739,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -774,7 +774,7 @@
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -807,7 +807,7 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -821,7 +821,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel@0 {
@@ -869,7 +869,7 @@
clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
<&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -880,7 +880,7 @@
clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
<&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 10/10] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
@ 2016-04-27 4:20 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-27 4:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 106 ++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 70eff80a813e..136911c1dc74 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -86,7 +86,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio1: gpio at e6051000 {
@@ -99,7 +99,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio2: gpio at e6052000 {
@@ -112,7 +112,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio3: gpio at e6053000 {
@@ -125,7 +125,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio4: gpio at e6054000 {
@@ -138,7 +138,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio5: gpio at e6055000 {
@@ -151,7 +151,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio6: gpio at e6055400 {
@@ -164,7 +164,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
cmt0: timer at ffca0000 {
@@ -174,7 +174,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
@@ -194,7 +194,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
@@ -225,7 +225,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
pfc: pin-controller at e6060000 {
@@ -259,7 +259,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -290,7 +290,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -304,7 +304,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -317,7 +317,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -330,7 +330,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -343,7 +343,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -356,7 +356,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -369,7 +369,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -382,7 +382,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -395,7 +395,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -408,7 +408,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -422,7 +422,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -436,7 +436,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -450,7 +450,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -464,7 +464,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -478,7 +478,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -492,7 +492,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -506,7 +506,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -520,7 +520,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -534,7 +534,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -543,7 +543,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -556,7 +556,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -568,7 +568,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -580,7 +580,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -592,7 +592,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -604,7 +604,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -616,7 +616,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -628,7 +628,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -642,7 +642,7 @@
clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -655,7 +655,7 @@
clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -668,7 +668,7 @@
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
};
@@ -678,7 +678,7 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -687,7 +687,7 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -696,7 +696,7 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -707,7 +707,7 @@
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -719,7 +719,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -728,7 +728,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -739,7 +739,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
@@ -774,7 +774,7 @@
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
@@ -807,7 +807,7 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -821,7 +821,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
clock-names = "usbhs";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel at 0 {
@@ -869,7 +869,7 @@
clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
<&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -880,7 +880,7 @@
clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
<&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
2016-04-27 4:20 ` Simon Horman
@ 2016-04-28 15:56 ` Arnd Bergmann
-1 siblings, 0 replies; 28+ messages in thread
From: Arnd Bergmann @ 2016-04-28 15:56 UTC (permalink / raw)
To: Simon Horman
Cc: arm, linux-renesas-soc, Olof Johansson, Kevin Hilman,
linux-arm-kernel, Magnus Damm
On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
>
> This pull requests is based on a merge of:
>
> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
> pulled.
> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
> tagged as renesas-dt-for-v4.7, which you have also already pulled.
>
> The reason for the somewhat tedious base on
> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
> is a hard run-time dependency.
>
> I also have a similar set of changes for arm64 which I will send separately.
Ok, I've started a next/late branch for this now, but unless something
else comes up that needs to be sent much later, I expect to submit
this as the last pull request at the same time as all the other ones
for 4.7.
For further clarification, am I right reading the above as meaning that
a 4.7 kernel is expected to still work with the dts files from 4.6,
but not the other way round?
Arnd
^ permalink raw reply [flat|nested] 28+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
@ 2016-04-28 15:56 ` Arnd Bergmann
0 siblings, 0 replies; 28+ messages in thread
From: Arnd Bergmann @ 2016-04-28 15:56 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
>
> This pull requests is based on a merge of:
>
> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
> pulled.
> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
> tagged as renesas-dt-for-v4.7, which you have also already pulled.
>
> The reason for the somewhat tedious base on
> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
> is a hard run-time dependency.
>
> I also have a similar set of changes for arm64 which I will send separately.
Ok, I've started a next/late branch for this now, but unless something
else comes up that needs to be sent much later, I expect to submit
this as the last pull request at the same time as all the other ones
for 4.7.
For further clarification, am I right reading the above as meaning that
a 4.7 kernel is expected to still work with the dts files from 4.6,
but not the other way round?
Arnd
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
2016-04-28 15:56 ` Arnd Bergmann
@ 2016-04-28 16:27 ` Geert Uytterhoeven
-1 siblings, 0 replies; 28+ messages in thread
From: Geert Uytterhoeven @ 2016-04-28 16:27 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Simon Horman, arm, linux-renesas-soc, Olof Johansson,
Kevin Hilman, linux-arm-kernel, Magnus Damm
Hi Arnd,
On Thu, Apr 28, 2016 at 5:56 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
>> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
>>
>> This pull requests is based on a merge of:
>>
>> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
>> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
>> pulled.
>> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
>> tagged as renesas-dt-for-v4.7, which you have also already pulled.
>>
>> The reason for the somewhat tedious base on
>> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
>> is a hard run-time dependency.
>>
>> I also have a similar set of changes for arm64 which I will send separately.
>
> Ok, I've started a next/late branch for this now, but unless something
> else comes up that needs to be sent much later, I expect to submit
> this as the last pull request at the same time as all the other ones
> for 4.7.
Thanks!
> For further clarification, am I right reading the above as meaning that
> a 4.7 kernel is expected to still work with the dts files from 4.6,
> but not the other way round?
That's correct.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 28+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
@ 2016-04-28 16:27 ` Geert Uytterhoeven
0 siblings, 0 replies; 28+ messages in thread
From: Geert Uytterhoeven @ 2016-04-28 16:27 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On Thu, Apr 28, 2016 at 5:56 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
>> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
>>
>> This pull requests is based on a merge of:
>>
>> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
>> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
>> pulled.
>> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
>> tagged as renesas-dt-for-v4.7, which you have also already pulled.
>>
>> The reason for the somewhat tedious base on
>> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
>> is a hard run-time dependency.
>>
>> I also have a similar set of changes for arm64 which I will send separately.
>
> Ok, I've started a next/late branch for this now, but unless something
> else comes up that needs to be sent much later, I expect to submit
> this as the last pull request at the same time as all the other ones
> for 4.7.
Thanks!
> For further clarification, am I right reading the above as meaning that
> a 4.7 kernel is expected to still work with the dts files from 4.6,
> but not the other way round?
That's correct.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
2016-04-28 16:27 ` Geert Uytterhoeven
@ 2016-04-28 23:22 ` Simon Horman
-1 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-28 23:22 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Arnd Bergmann, arm, linux-renesas-soc, Olof Johansson,
Kevin Hilman, linux-arm-kernel, Magnus Damm
Hi Arnd,
On Thu, Apr 28, 2016 at 06:27:25PM +0200, Geert Uytterhoeven wrote:
> Hi Arnd,
>
> On Thu, Apr 28, 2016 at 5:56 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
> >> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
> >>
> >> This pull requests is based on a merge of:
> >>
> >> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
> >> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
> >> pulled.
> >> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
> >> tagged as renesas-dt-for-v4.7, which you have also already pulled.
> >>
> >> The reason for the somewhat tedious base on
> >> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
> >> is a hard run-time dependency.
> >>
> >> I also have a similar set of changes for arm64 which I will send separately.
> >
> > Ok, I've started a next/late branch for this now, but unless something
> > else comes up that needs to be sent much later, I expect to submit
> > this as the last pull request at the same time as all the other ones
> > for 4.7.
>
> Thanks!
Yes, thanks for your understanding.
FWIW, I think "Renesas ARM64 Based SoC DT PM Domain Updates for v4.7" needs
to be handled the in a similar way. Its a similar pair of changes for the
r8a7795 SoC.
Everything else I have queued up for v4.7 has been pulled and I do
not intend to queue up any more non-fix changes for v4.7.
> > For further clarification, am I right reading the above as meaning that
> > a 4.7 kernel is expected to still work with the dts files from 4.6,
> > but not the other way round?
>
> That's correct.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
^ permalink raw reply [flat|nested] 28+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7
@ 2016-04-28 23:22 ` Simon Horman
0 siblings, 0 replies; 28+ messages in thread
From: Simon Horman @ 2016-04-28 23:22 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On Thu, Apr 28, 2016 at 06:27:25PM +0200, Geert Uytterhoeven wrote:
> Hi Arnd,
>
> On Thu, Apr 28, 2016 at 5:56 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Wednesday 27 April 2016 14:20:34 Simon Horman wrote:
> >> Please consider these Renesas ARM based SoC DT pm-domain updates for v4.7.
> >>
> >> This pull requests is based on a merge of:
> >>
> >> * "[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for
> >> v4.7", tagged as renesas-rcar-sysc2-for-v4.7, which you have already
> >> pulled.
> >> * "[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7",
> >> tagged as renesas-dt-for-v4.7, which you have also already pulled.
> >>
> >> The reason for the somewhat tedious base on
> >> renesas-rcar-sysc2-for-v4.7, which provides driver changes,
> >> is a hard run-time dependency.
> >>
> >> I also have a similar set of changes for arm64 which I will send separately.
> >
> > Ok, I've started a next/late branch for this now, but unless something
> > else comes up that needs to be sent much later, I expect to submit
> > this as the last pull request at the same time as all the other ones
> > for 4.7.
>
> Thanks!
Yes, thanks for your understanding.
FWIW, I think "Renesas ARM64 Based SoC DT PM Domain Updates for v4.7" needs
to be handled the in a similar way. Its a similar pair of changes for the
r8a7795 SoC.
Everything else I have queued up for v4.7 has been pulled and I do
not intend to queue up any more non-fix changes for v4.7.
> > For further clarification, am I right reading the above as meaning that
> > a 4.7 kernel is expected to still work with the dts files from 4.6,
> > but not the other way round?
>
> That's correct.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2016-04-28 23:22 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-27 4:20 [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7 Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 01/10] ARM: dts: r8a7779: Add SYSC PM Domains Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 02/10] ARM: dts: r8a7790: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 03/10] ARM: dts: r8a7791: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 04/10] ARM: dts: r8a7793: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 05/10] ARM: dts: r8a7794: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 06/10] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 07/10] ARM: dts: r8a7790: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 08/10] ARM: dts: r8a7791: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 09/10] ARM: dts: r8a7793: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-27 4:20 ` [PATCH 10/10] ARM: dts: r8a7794: " Simon Horman
2016-04-27 4:20 ` Simon Horman
2016-04-28 15:56 ` [GIT PULL] Renesas ARM Based SoC DT PM Domain Updates for v4.7 Arnd Bergmann
2016-04-28 15:56 ` Arnd Bergmann
2016-04-28 16:27 ` Geert Uytterhoeven
2016-04-28 16:27 ` Geert Uytterhoeven
2016-04-28 23:22 ` Simon Horman
2016-04-28 23:22 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.