From: Vignesh R <vigneshr@ti.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Arnd Bergmann <arnd@arndb.de>, <linux-mtd@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<tudor.ambarus@microchip.com>, <nsekhar@ti.com>
Subject: Re: [RFC PATCH 0/5] MTD: Add Initial Hyperbus support
Date: Tue, 19 Feb 2019 12:54:34 +0530 [thread overview]
Message-ID: <a843dbb2-054a-2afd-863f-2d1822b3ca33@ti.com> (raw)
In-Reply-To: <20190219063607.29949-1-vigneshr@ti.com>
On 19/02/19 12:06 PM, Vignesh R wrote:
[...]
>
> Tested on modified TI AM654 EVM with Cypress Hyperflash S26KS512 by
> creating a UBIFS partition and writing and reading files to it.
> Stress tested by writing/reading 16MB flash repeatedly at different
> offsets using dd commmand.
>
Here is the enumeration log from dmesg:
https://pastebin.ubuntu.com/p/Vd5jYQT4FH/
> HyperBus specification can be found at[1]
> HyperFlash datasheet can be found at[2]
> TI's HBMC controller details at[3]
>
> [1] https://www.cypress.com/file/213356/download
> [2] https://www.cypress.com/file/213346/download
> [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf
> Table 12-5741. HyperFlash Access Sequence
>
> Vignesh R (5):
> mtd: cfi_cmdset_0002: Add support for polling status register
> dt-bindings: mtd: Add binding documentation for Hyperbus memory
> devices
> mtd: Add support for Hyperbus memory devices
> dt-bindings: mtd: Add bindings for TI's AM654 Hyperbus memory
> controller
> mtd: hyperbus: Add driver for TI's Hyperbus memory controller
>
> .../bindings/mtd/cypress,hyperbus.txt | 6 +
> .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 27 +++
> MAINTAINERS | 8 +
> drivers/mtd/Kconfig | 2 +
> drivers/mtd/Makefile | 1 +
> drivers/mtd/chips/cfi_cmdset_0002.c | 50 ++++++
> drivers/mtd/hyperbus/Kconfig | 23 +++
> drivers/mtd/hyperbus/Makefile | 4 +
> drivers/mtd/hyperbus/core.c | 167 ++++++++++++++++++
> drivers/mtd/hyperbus/hbmc_am654.c | 105 +++++++++++
> include/linux/mtd/cfi.h | 5 +
> include/linux/mtd/hyperbus.h | 73 ++++++++
> 12 files changed, 471 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> create mode 100644 drivers/mtd/hyperbus/Kconfig
> create mode 100644 drivers/mtd/hyperbus/Makefile
> create mode 100644 drivers/mtd/hyperbus/core.c
> create mode 100644 drivers/mtd/hyperbus/hbmc_am654.c
> create mode 100644 include/linux/mtd/hyperbus.h
>
--
Regards
Vignesh
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Arnd Bergmann <arnd@arndb.de>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
tudor.ambarus@microchip.com, nsekhar@ti.com
Subject: Re: [RFC PATCH 0/5] MTD: Add Initial Hyperbus support
Date: Tue, 19 Feb 2019 12:54:34 +0530 [thread overview]
Message-ID: <a843dbb2-054a-2afd-863f-2d1822b3ca33@ti.com> (raw)
In-Reply-To: <20190219063607.29949-1-vigneshr@ti.com>
On 19/02/19 12:06 PM, Vignesh R wrote:
[...]
>
> Tested on modified TI AM654 EVM with Cypress Hyperflash S26KS512 by
> creating a UBIFS partition and writing and reading files to it.
> Stress tested by writing/reading 16MB flash repeatedly at different
> offsets using dd commmand.
>
Here is the enumeration log from dmesg:
https://pastebin.ubuntu.com/p/Vd5jYQT4FH/
> HyperBus specification can be found at[1]
> HyperFlash datasheet can be found at[2]
> TI's HBMC controller details at[3]
>
> [1] https://www.cypress.com/file/213356/download
> [2] https://www.cypress.com/file/213346/download
> [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf
> Table 12-5741. HyperFlash Access Sequence
>
> Vignesh R (5):
> mtd: cfi_cmdset_0002: Add support for polling status register
> dt-bindings: mtd: Add binding documentation for Hyperbus memory
> devices
> mtd: Add support for Hyperbus memory devices
> dt-bindings: mtd: Add bindings for TI's AM654 Hyperbus memory
> controller
> mtd: hyperbus: Add driver for TI's Hyperbus memory controller
>
> .../bindings/mtd/cypress,hyperbus.txt | 6 +
> .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 27 +++
> MAINTAINERS | 8 +
> drivers/mtd/Kconfig | 2 +
> drivers/mtd/Makefile | 1 +
> drivers/mtd/chips/cfi_cmdset_0002.c | 50 ++++++
> drivers/mtd/hyperbus/Kconfig | 23 +++
> drivers/mtd/hyperbus/Makefile | 4 +
> drivers/mtd/hyperbus/core.c | 167 ++++++++++++++++++
> drivers/mtd/hyperbus/hbmc_am654.c | 105 +++++++++++
> include/linux/mtd/cfi.h | 5 +
> include/linux/mtd/hyperbus.h | 73 ++++++++
> 12 files changed, 471 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> create mode 100644 drivers/mtd/hyperbus/Kconfig
> create mode 100644 drivers/mtd/hyperbus/Makefile
> create mode 100644 drivers/mtd/hyperbus/core.c
> create mode 100644 drivers/mtd/hyperbus/hbmc_am654.c
> create mode 100644 include/linux/mtd/hyperbus.h
>
--
Regards
Vignesh
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
tudor.ambarus@microchip.com,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
nsekhar@ti.com, linux-kernel@vger.kernel.org,
linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 0/5] MTD: Add Initial Hyperbus support
Date: Tue, 19 Feb 2019 12:54:34 +0530 [thread overview]
Message-ID: <a843dbb2-054a-2afd-863f-2d1822b3ca33@ti.com> (raw)
In-Reply-To: <20190219063607.29949-1-vigneshr@ti.com>
On 19/02/19 12:06 PM, Vignesh R wrote:
[...]
>
> Tested on modified TI AM654 EVM with Cypress Hyperflash S26KS512 by
> creating a UBIFS partition and writing and reading files to it.
> Stress tested by writing/reading 16MB flash repeatedly at different
> offsets using dd commmand.
>
Here is the enumeration log from dmesg:
https://pastebin.ubuntu.com/p/Vd5jYQT4FH/
> HyperBus specification can be found at[1]
> HyperFlash datasheet can be found at[2]
> TI's HBMC controller details at[3]
>
> [1] https://www.cypress.com/file/213356/download
> [2] https://www.cypress.com/file/213346/download
> [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf
> Table 12-5741. HyperFlash Access Sequence
>
> Vignesh R (5):
> mtd: cfi_cmdset_0002: Add support for polling status register
> dt-bindings: mtd: Add binding documentation for Hyperbus memory
> devices
> mtd: Add support for Hyperbus memory devices
> dt-bindings: mtd: Add bindings for TI's AM654 Hyperbus memory
> controller
> mtd: hyperbus: Add driver for TI's Hyperbus memory controller
>
> .../bindings/mtd/cypress,hyperbus.txt | 6 +
> .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 27 +++
> MAINTAINERS | 8 +
> drivers/mtd/Kconfig | 2 +
> drivers/mtd/Makefile | 1 +
> drivers/mtd/chips/cfi_cmdset_0002.c | 50 ++++++
> drivers/mtd/hyperbus/Kconfig | 23 +++
> drivers/mtd/hyperbus/Makefile | 4 +
> drivers/mtd/hyperbus/core.c | 167 ++++++++++++++++++
> drivers/mtd/hyperbus/hbmc_am654.c | 105 +++++++++++
> include/linux/mtd/cfi.h | 5 +
> include/linux/mtd/hyperbus.h | 73 ++++++++
> 12 files changed, 471 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> create mode 100644 drivers/mtd/hyperbus/Kconfig
> create mode 100644 drivers/mtd/hyperbus/Makefile
> create mode 100644 drivers/mtd/hyperbus/core.c
> create mode 100644 drivers/mtd/hyperbus/hbmc_am654.c
> create mode 100644 include/linux/mtd/hyperbus.h
>
--
Regards
Vignesh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
tudor.ambarus@microchip.com,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
nsekhar@ti.com, linux-kernel@vger.kernel.org,
linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 0/5] MTD: Add Initial Hyperbus support
Date: Tue, 19 Feb 2019 12:54:34 +0530 [thread overview]
Message-ID: <a843dbb2-054a-2afd-863f-2d1822b3ca33@ti.com> (raw)
In-Reply-To: <20190219063607.29949-1-vigneshr@ti.com>
On 19/02/19 12:06 PM, Vignesh R wrote:
[...]
>
> Tested on modified TI AM654 EVM with Cypress Hyperflash S26KS512 by
> creating a UBIFS partition and writing and reading files to it.
> Stress tested by writing/reading 16MB flash repeatedly at different
> offsets using dd commmand.
>
Here is the enumeration log from dmesg:
https://pastebin.ubuntu.com/p/Vd5jYQT4FH/
> HyperBus specification can be found at[1]
> HyperFlash datasheet can be found at[2]
> TI's HBMC controller details at[3]
>
> [1] https://www.cypress.com/file/213356/download
> [2] https://www.cypress.com/file/213346/download
> [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf
> Table 12-5741. HyperFlash Access Sequence
>
> Vignesh R (5):
> mtd: cfi_cmdset_0002: Add support for polling status register
> dt-bindings: mtd: Add binding documentation for Hyperbus memory
> devices
> mtd: Add support for Hyperbus memory devices
> dt-bindings: mtd: Add bindings for TI's AM654 Hyperbus memory
> controller
> mtd: hyperbus: Add driver for TI's Hyperbus memory controller
>
> .../bindings/mtd/cypress,hyperbus.txt | 6 +
> .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 27 +++
> MAINTAINERS | 8 +
> drivers/mtd/Kconfig | 2 +
> drivers/mtd/Makefile | 1 +
> drivers/mtd/chips/cfi_cmdset_0002.c | 50 ++++++
> drivers/mtd/hyperbus/Kconfig | 23 +++
> drivers/mtd/hyperbus/Makefile | 4 +
> drivers/mtd/hyperbus/core.c | 167 ++++++++++++++++++
> drivers/mtd/hyperbus/hbmc_am654.c | 105 +++++++++++
> include/linux/mtd/cfi.h | 5 +
> include/linux/mtd/hyperbus.h | 73 ++++++++
> 12 files changed, 471 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> create mode 100644 drivers/mtd/hyperbus/Kconfig
> create mode 100644 drivers/mtd/hyperbus/Makefile
> create mode 100644 drivers/mtd/hyperbus/core.c
> create mode 100644 drivers/mtd/hyperbus/hbmc_am654.c
> create mode 100644 include/linux/mtd/hyperbus.h
>
--
Regards
Vignesh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-19 7:23 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 6:36 [RFC PATCH 0/5] MTD: Add Initial Hyperbus support Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` [RFC PATCH 1/5] mtd: cfi_cmdset_0002: Add support for polling status register Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-23 18:41 ` Sergei Shtylyov
2019-02-23 18:41 ` Sergei Shtylyov
2019-02-23 18:41 ` Sergei Shtylyov
2019-02-23 18:41 ` Sergei Shtylyov
2019-02-23 18:44 ` Sergei Shtylyov
2019-02-23 18:44 ` Sergei Shtylyov
2019-02-23 18:44 ` Sergei Shtylyov
2019-02-23 18:44 ` Sergei Shtylyov
2019-02-19 6:36 ` [RFC PATCH 2/5] dt-bindings: mtd: Add binding documentation for Hyperbus memory devices Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` [RFC PATCH 3/5] mtd: Add support " Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-23 20:19 ` Sergei Shtylyov
2019-02-23 20:19 ` Sergei Shtylyov
2019-02-23 20:19 ` Sergei Shtylyov
2019-02-23 20:19 ` Sergei Shtylyov
2019-02-25 18:21 ` Vignesh R
2019-02-25 18:21 ` Vignesh R
2019-02-25 18:21 ` Vignesh R
2019-02-25 18:21 ` Vignesh R
2019-02-25 19:33 ` Sergei Shtylyov
2019-02-25 19:33 ` Sergei Shtylyov
2019-02-25 19:33 ` Sergei Shtylyov
2019-02-25 19:33 ` Sergei Shtylyov
2019-02-26 10:26 ` Vignesh R
2019-02-26 10:26 ` Vignesh R
2019-02-26 10:26 ` Vignesh R
2019-02-26 10:26 ` Vignesh R
2019-02-26 11:08 ` Sergei Shtylyov
2019-02-26 11:08 ` Sergei Shtylyov
2019-02-26 11:08 ` Sergei Shtylyov
2019-02-26 11:08 ` Sergei Shtylyov
2019-02-26 11:00 ` Vignesh R
2019-02-26 11:00 ` Vignesh R
2019-02-26 11:00 ` Vignesh R
2019-02-26 11:00 ` Vignesh R
2019-02-25 18:26 ` Sergei Shtylyov
2019-02-25 18:26 ` Sergei Shtylyov
2019-02-25 18:26 ` Sergei Shtylyov
2019-02-25 18:26 ` Sergei Shtylyov
2019-02-26 18:16 ` Sergei Shtylyov
2019-02-26 18:16 ` Sergei Shtylyov
2019-02-26 18:16 ` Sergei Shtylyov
2019-02-26 18:16 ` Sergei Shtylyov
2019-02-27 9:52 ` Vignesh Raghavendra
2019-02-27 9:52 ` Vignesh Raghavendra
2019-02-27 9:52 ` Vignesh Raghavendra
2019-02-27 9:59 ` Boris Brezillon
2019-02-27 9:59 ` Boris Brezillon
2019-02-27 9:59 ` Boris Brezillon
2019-02-27 9:59 ` Boris Brezillon
2019-02-27 10:12 ` Vignesh Raghavendra
2019-02-27 10:12 ` Vignesh Raghavendra
2019-02-27 10:12 ` Vignesh Raghavendra
2019-02-19 6:36 ` [RFC PATCH 4/5] dt-bindings: mtd: Add bindings for TI's AM654 Hyperbus memory controller Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` [RFC PATCH 5/5] mtd: hyperbus: Add driver for TI's " Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-19 6:36 ` Vignesh R
2019-02-24 14:06 ` Sergei Shtylyov
2019-02-24 14:06 ` Sergei Shtylyov
2019-02-24 14:06 ` Sergei Shtylyov
2019-02-24 14:06 ` Sergei Shtylyov
2019-02-25 16:29 ` Sergei Shtylyov
2019-02-25 16:29 ` Sergei Shtylyov
2019-02-25 16:29 ` Sergei Shtylyov
2019-02-25 16:29 ` Sergei Shtylyov
2019-02-26 10:18 ` Vignesh R
2019-02-26 10:18 ` Vignesh R
2019-02-26 10:18 ` Vignesh R
2019-02-26 10:18 ` Vignesh R
2019-02-26 18:28 ` Sergei Shtylyov
2019-02-26 18:28 ` Sergei Shtylyov
2019-02-26 18:28 ` Sergei Shtylyov
2019-02-26 18:28 ` Sergei Shtylyov
2019-02-19 7:24 ` Vignesh R [this message]
2019-02-19 7:24 ` [RFC PATCH 0/5] MTD: Add Initial Hyperbus support Vignesh R
2019-02-19 7:24 ` Vignesh R
2019-02-19 7:24 ` Vignesh R
2019-02-19 7:52 ` Boris Brezillon
2019-02-19 7:52 ` Boris Brezillon
2019-02-19 7:52 ` Boris Brezillon
2019-02-19 7:52 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a843dbb2-054a-2afd-863f-2d1822b3ca33@ti.com \
--to=vigneshr@ti.com \
--cc=arnd@arndb.de \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=nsekhar@ti.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=tudor.ambarus@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.