[PATCH v3 0/1] iio: jsa1212: Add JSA1212 proximity/ALS sensor

[PATCH v3 0/1] iio: jsa1212: Add JSA1212 proximity/ALS sensor

[Kuppuswamy Sathyanarayanan]

Please let me know your review comments.

PATCH v3 changes:

1. Replaced status flags with bool values.
2. Added regmap suppport to avoid adding custom i2c register update routine.
3. Also addressed some minor comments from Jonathan Cameron

PATCH v2 changes:

1. Combined ALS/PXS enable/disable functions into a single routine.
2. Removed extra debug messages.
3. Also addressed review comments from Peter Meerwald

Kuppuswamy Sathyanarayanan (1):
  iio: jsa1212: Add JSA1212 proximity/ALS sensor

 drivers/iio/light/Kconfig   |   10 +
 drivers/iio/light/Makefile  |    1 +
 drivers/iio/light/jsa1212.c |  487 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 498 insertions(+)
 create mode 100644 drivers/iio/light/jsa1212.c

-- 
1.7.9.5

[PATCH v3 1/1] iio: jsa1212: Add JSA1212 proximity/ALS sensor

[Kuppuswamy Sathyanarayanan]

This patch adds a new driver for solteam opto JSA1212 proximity and
ambient light sensor.

Basic details of the chip can be found here.

http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/iio/light/Kconfig   |   10 +
 drivers/iio/light/Makefile  |    1 +
 drivers/iio/light/jsa1212.c |  487 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 498 insertions(+)
 create mode 100644 drivers/iio/light/jsa1212.c

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index c89740d..07d0a76 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -87,6 +87,16 @@ config HID_SENSOR_PROX
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-sensor-prox.
 
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	help
+	 Say Y here if you want to build a IIO driver for JSA1212
+	 proximity & ALS sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called jsa1212.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 3eb36e5..ce85c86 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CM36651)		+= cm36651.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
+obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
new file mode 100644
index 0000000..71e1793
--- /dev/null
+++ b/drivers/iio/light/jsa1212.c
@@ -0,0 +1,487 @@
+/*
+ * JSA1212 Ambient Light & Proximity Sensor Driver
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+/* JSA1212 reg address */
+#define JSA1212_CONF_REG		0x01
+#define JSA1212_INT_REG			0x02
+#define JSA1212_PXS_LT_REG		0x03
+#define JSA1212_PXS_HT_REG		0x04
+#define JSA1212_ALS_TH1_REG		0x05
+#define JSA1212_ALS_TH2_REG		0x06
+#define JSA1212_ALS_TH3_REG		0x07
+#define JSA1212_PXS_DATA_REG		0x08
+#define JSA1212_ALS_DT1_REG		0x09
+#define JSA1212_ALS_DT2_REG		0x0A
+#define JSA1212_ALS_RNG_REG		0x0B
+#define JSA1212_MAX_REG			0x0C
+
+/* JSA1212 reg defaults */
+#define JSA1212_CONF_REG_DEF		0x58
+#define JSA1212_INT_REG_DEF		0x02
+#define JSA1212_PXS_LT_REG_DEF		0x00
+#define JSA1212_PXS_HT_REG_DEF		0xFF
+#define JSA1212_ALS_TH1_REG_DEF		0x00
+#define JSA1212_ALS_TH2_REG_DEF		0xF0
+#define JSA1212_ALS_TH3_REG_DEF		0xFF
+#define JSA1212_ALS_RNG_REG_DEF		0x00
+
+/* JSA1212 reg masks */
+#define JSA1212_CONF_MASK		0xFF
+#define JSA1212_INT_MASK		0xFF
+#define JSA1212_PXS_LT_MASK		0xFF
+#define JSA1212_PXS_HT_MASK		0xFF
+#define JSA1212_ALS_TH1_MASK		0xFF
+#define JSA1212_ALS_TH2_LT_MASK		0x0F
+#define JSA1212_ALS_TH2_HT_MASK		0xF0
+#define JSA1212_ALS_TH3_MASK		0xFF
+#define JSA1212_PXS_DATA_MASK		0xFF
+#define JSA1212_ALS_DATA_MASK		0xFFF
+#define JSA1212_ALS_DT1_MASK		0xFF
+#define JSA1212_ALS_DT2_MASK		0x0F
+#define JSA1212_ALS_RNG_MASK		0x07
+#define JSA1212_REG_MASK		0xFF
+
+/* JSA1212 CONF REG bits */
+#define JSA1212_CONF_PXS_MASK		0x80
+#define JSA1212_CONF_PXS_ENABLE		0x80
+#define JSA1212_CONF_PXS_DISABLE	0x00
+#define JSA1212_CONF_ALS_MASK		0x04
+#define JSA1212_CONF_ALS_ENABLE		0x04
+#define JSA1212_CONF_ALS_DISABLE	0x00
+
+/* JSA1212 INT REG bits */
+#define JSA1212_INT_CTRL_MASK		0x01
+#define JSA1212_INT_CTRL_EITHER		0x00
+#define JSA1212_INT_CTRL_BOTH		0x01
+#define JSA1212_INT_ALS_PRST_MASK	0x06
+#define JSA1212_INT_ALS_PRST_1CONV	0x00
+#define JSA1212_INT_ALS_PRST_4CONV	0x02
+#define JSA1212_INT_ALS_PRST_8CONV	0x04
+#define JSA1212_INT_ALS_PRST_16CONV	0x06
+#define JSA1212_INT_ALS_FLAG_MASK	0x08
+#define JSA1212_INT_ALS_FLAG_CLR	0x00
+#define JSA1212_INT_PXS_PRST_MASK	0x60
+#define JSA1212_INT_PXS_PRST_1CONV	0x00
+#define JSA1212_INT_PXS_PRST_4CONV	0x20
+#define JSA1212_INT_PXS_PRST_8CONV	0x40
+#define JSA1212_INT_PXS_PRST_16CONV	0x60
+#define JSA1212_INT_PXS_FLAG_MASK	0x80
+#define JSA1212_INT_PXS_FLAG_CLR	0x00
+
+/* JSA1212 ALS RNG REG bits */
+#define JSA1212_ALS_RNG_0_2048		0x00
+#define JSA1212_ALS_RNG_0_1024		0x01
+#define JSA1212_ALS_RNG_0_512		0x02
+#define JSA1212_ALS_RNG_0_256		0x03
+#define JSA1212_ALS_RNG_0_128		0x04
+
+/* JSA1212 INT threshold range */
+#define JSA1212_ALS_TH_MIN	0x0000
+#define JSA1212_ALS_TH_MAX	0x0FFF
+#define JSA1212_PXS_TH_MIN	0x00
+#define JSA1212_PXS_TH_MAX	0xFF
+
+#define JSA1212_ALS_DELAY_MS	0xC8
+#define JSA1212_PXS_DELAY_MS	0x64
+
+#define JSA1212_DRIVER_NAME	"jsa1212"
+#define JSA1212_REGMAP_NAME	"jsa1212_regmap"
+
+enum jsa1212_op_mode {
+	JSA1212_OPMODE_ALS_EN,
+	JSA1212_OPMODE_PXS_EN,
+};
+
+struct jsa1212_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 als_rng_idx;
+	bool als_en; /* ALS enable status */
+	bool pxs_en; /* proximity enable status */
+	struct regmap *regmap;
+};
+
+/* ALS range idx to val mapping */
+static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
+						128, 128, 128};
+
+/* Enables or disables ALS function based on status */
+static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->als_en = status ? true : false;
+
+	return ret;
+}
+
+/* Enables or disables PXS function based on status */
+static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_PXS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->pxs_en = status ? true : false;
+
+	return ret;
+}
+
+static int jsa1212_read_als_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	u8 als_data[2];
+
+	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_ALS_DELAY_MS);
+
+	/* Read 12 bit data */
+	ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, als_data, 2);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "als data read err\n");
+		return ret;
+	}
+
+	*val = als_data[1] << 8 | als_data[0];
+
+	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int jsa1212_read_pxs_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	unsigned int pxs_data;
+
+	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_PXS_DELAY_MS);
+
+	/* Read out all data */
+	ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "pxs data read err\n");
+		return ret;
+	}
+
+	*val = pxs_data & JSA1212_PXS_DATA_MASK;
+
+	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int jsa1212_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	int ret;
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = jsa1212_read_als_data(data, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = jsa1212_read_pxs_data(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		ret = ret < 0 ? ret : IIO_VAL_INT;
+		mutex_unlock(&data->lock);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			*val = jsa1212_als_range_val[data->als_rng_idx];
+			*val2 = BIT(12); /* Max 12 bit value */
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_chan_spec jsa1212_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	}
+};
+
+static const struct iio_info jsa1212_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &jsa1212_read_raw,
+};
+
+static int jsa1212_chip_init(struct jsa1212_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_REG_DEF);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, JSA1212_INT_REG,
+				JSA1212_INT_REG_DEF);
+	if (ret < 0)
+		return ret;
+
+	data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
+
+	return 0;
+}
+
+static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case JSA1212_PXS_DATA_REG:
+	case JSA1212_ALS_DT1_REG:
+	case JSA1212_ALS_DT2_REG:
+	case JSA1212_INT_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config jsa1212_regmap_config = {
+	.name =  JSA1212_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = JSA1212_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = jsa1212_is_volatile_reg,
+};
+
+static int jsa1212_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct jsa1212_data *jsa1212_data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*jsa1212_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	jsa1212_data = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	jsa1212_data->client = client;
+	jsa1212_data->regmap = regmap;
+
+	mutex_init(&jsa1212_data->lock);
+
+	ret = jsa1212_chip_init(jsa1212_data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = jsa1212_channels;
+	indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
+	indio_dev->name = JSA1212_DRIVER_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->info = &jsa1212_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: register device failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+ /* power off the device */
+static int jsa1212_power_off(struct jsa1212_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK |
+				JSA1212_CONF_PXS_MASK,
+				JSA1212_CONF_ALS_DISABLE |
+				JSA1212_CONF_PXS_DISABLE);
+
+	if (ret < 0)
+		dev_err(&data->client->dev, "power off cmd failed\n");
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+
+static int jsa1212_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct jsa1212_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = jsa1212_power_off(data);
+
+	iio_device_unregister(indio_dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int jsa1212_suspend(struct device *dev)
+{
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return jsa1212_power_off(data);
+}
+
+static int jsa1212_resume(struct device *dev)
+{
+	int ret = 0;
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	mutex_lock(&data->lock);
+
+	if (data->als_en) {
+		ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+		if (ret < 0) {
+			dev_err(dev, "als resume failed\n");
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+	}
+
+	if (data->pxs_en) {
+		ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+		if (ret < 0)
+			dev_err(dev, "pxs resume failed\n");
+	}
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
+
+#define JSA1212_PM_OPS (&jsa1212_pm_ops)
+#else
+#define JSA1212_PM_OPS NULL
+#endif
+
+static const struct acpi_device_id jsa1212_acpi_match[] = {
+	{"JSA1212", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
+
+static const struct i2c_device_id jsa1212_id[] = {
+	{ JSA1212_DRIVER_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, jsa1212_id);
+
+static struct i2c_driver jsa1212_driver = {
+	.driver = {
+		.name	= JSA1212_DRIVER_NAME,
+		.pm	= JSA1212_PM_OPS,
+		.owner	= THIS_MODULE,
+		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
+	},
+	.probe		= jsa1212_probe,
+	.remove		= jsa1212_remove,
+	.id_table	= jsa1212_id,
+};
+module_i2c_driver(jsa1212_driver);
+
+MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
+MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

Re: [PATCH v3 1/1] iio: jsa1212: Add JSA1212 proximity/ALS sensor

[Jonathan Cameron]

On 08/08/14 18:46, Kuppuswamy Sathyanarayanan wrote:
> This patch adds a new driver for solteam opto JSA1212 proximity and
> ambient light sensor.
>
> Basic details of the chip can be found here.
>
> http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Mostly looking good.  A few bits and bobs inline.

J
> ---
>  drivers/iio/light/Kconfig   |   10 +
>  drivers/iio/light/Makefile  |    1 +
>  drivers/iio/light/jsa1212.c |  487 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 498 insertions(+)
>  create mode 100644 drivers/iio/light/jsa1212.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index c89740d..07d0a76 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -87,6 +87,16 @@ config HID_SENSOR_PROX
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called hid-sensor-prox.
>
> +config JSA1212
> +	tristate "JSA1212 ALS and proximity sensor driver"
> +	depends on I2C
> +	help
> +	 Say Y here if you want to build a IIO driver for JSA1212
> +	 proximity & ALS sensor device.
> +
> +	 To compile this driver as a module, choose M here:
> +	 the module will be called jsa1212.
> +
>  config SENSORS_LM3533
>  	tristate "LM3533 ambient light sensor"
>  	depends on MFD_LM3533
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 3eb36e5..ce85c86 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_CM36651)		+= cm36651.o
>  obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
>  obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
>  obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
> +obj-$(CONFIG_JSA1212)		+= jsa1212.o
>  obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
>  obj-$(CONFIG_LTR501)		+= ltr501.o
>  obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
> diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
> new file mode 100644
> index 0000000..71e1793
> --- /dev/null
> +++ b/drivers/iio/light/jsa1212.c
> @@ -0,0 +1,487 @@
> +/*
> + * JSA1212 Ambient Light & Proximity Sensor Driver
> + *
> + * Copyright (c) 2014, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/acpi.h>
> +#include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
Why gpio?
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
you don't have any events so don't need htis header...
> +
> +/* JSA1212 reg address */
> +#define JSA1212_CONF_REG		0x01
> +#define JSA1212_INT_REG			0x02
> +#define JSA1212_PXS_LT_REG		0x03
> +#define JSA1212_PXS_HT_REG		0x04
> +#define JSA1212_ALS_TH1_REG		0x05
> +#define JSA1212_ALS_TH2_REG		0x06
> +#define JSA1212_ALS_TH3_REG		0x07
> +#define JSA1212_PXS_DATA_REG		0x08
> +#define JSA1212_ALS_DT1_REG		0x09
> +#define JSA1212_ALS_DT2_REG		0x0A
> +#define JSA1212_ALS_RNG_REG		0x0B
> +#define JSA1212_MAX_REG			0x0C
> +
> +/* JSA1212 reg defaults */
> +#define JSA1212_CONF_REG_DEF		0x58
Interestingly this consists of exclusively bits not list below.
If possible break it up into what it is actually doing...

> +#define JSA1212_INT_REG_DEF		0x02
This one looks like it can be given in terms of what it is doing
using the definitions below.  Please do so.

> +#define JSA1212_PXS_LT_REG_DEF		0x00
> +#define JSA1212_PXS_HT_REG_DEF		0xFF
> +#define JSA1212_ALS_TH1_REG_DEF		0x00
> +#define JSA1212_ALS_TH2_REG_DEF		0xF0
> +#define JSA1212_ALS_TH3_REG_DEF		0xFF
> +#define JSA1212_ALS_RNG_REG_DEF		0x00
There are a fair number of defines here that are unused
and don't add anything it terms of documentation etc...
Perhaps prune them back somewhat?
> +
> +/* JSA1212 reg masks */
> +#define JSA1212_CONF_MASK		0xFF
> +#define JSA1212_INT_MASK		0xFF
> +#define JSA1212_PXS_LT_MASK		0xFF
> +#define JSA1212_PXS_HT_MASK		0xFF
> +#define JSA1212_ALS_TH1_MASK		0xFF
> +#define JSA1212_ALS_TH2_LT_MASK		0x0F
> +#define JSA1212_ALS_TH2_HT_MASK		0xF0
> +#define JSA1212_ALS_TH3_MASK		0xFF
> +#define JSA1212_PXS_DATA_MASK		0xFF
> +#define JSA1212_ALS_DATA_MASK		0xFFF
> +#define JSA1212_ALS_DT1_MASK		0xFF
> +#define JSA1212_ALS_DT2_MASK		0x0F
> +#define JSA1212_ALS_RNG_MASK		0x07
> +#define JSA1212_REG_MASK		0xFF
> +
> +/* JSA1212 CONF REG bits */
> +#define JSA1212_CONF_PXS_MASK		0x80
> +#define JSA1212_CONF_PXS_ENABLE		0x80
> +#define JSA1212_CONF_PXS_DISABLE	0x00
> +#define JSA1212_CONF_ALS_MASK		0x04
> +#define JSA1212_CONF_ALS_ENABLE		0x04
> +#define JSA1212_CONF_ALS_DISABLE	0x00
> +
> +/* JSA1212 INT REG bits */
> +#define JSA1212_INT_CTRL_MASK		0x01
> +#define JSA1212_INT_CTRL_EITHER		0x00
> +#define JSA1212_INT_CTRL_BOTH		0x01
> +#define JSA1212_INT_ALS_PRST_MASK	0x06
> +#define JSA1212_INT_ALS_PRST_1CONV	0x00
> +#define JSA1212_INT_ALS_PRST_4CONV	0x02
> +#define JSA1212_INT_ALS_PRST_8CONV	0x04
> +#define JSA1212_INT_ALS_PRST_16CONV	0x06
> +#define JSA1212_INT_ALS_FLAG_MASK	0x08
> +#define JSA1212_INT_ALS_FLAG_CLR	0x00
> +#define JSA1212_INT_PXS_PRST_MASK	0x60
> +#define JSA1212_INT_PXS_PRST_1CONV	0x00
> +#define JSA1212_INT_PXS_PRST_4CONV	0x20
> +#define JSA1212_INT_PXS_PRST_8CONV	0x40
> +#define JSA1212_INT_PXS_PRST_16CONV	0x60
> +#define JSA1212_INT_PXS_FLAG_MASK	0x80
> +#define JSA1212_INT_PXS_FLAG_CLR	0x00
> +
> +/* JSA1212 ALS RNG REG bits */
> +#define JSA1212_ALS_RNG_0_2048		0x00
> +#define JSA1212_ALS_RNG_0_1024		0x01
> +#define JSA1212_ALS_RNG_0_512		0x02
> +#define JSA1212_ALS_RNG_0_256		0x03
> +#define JSA1212_ALS_RNG_0_128		0x04
> +
> +/* JSA1212 INT threshold range */
> +#define JSA1212_ALS_TH_MIN	0x0000
> +#define JSA1212_ALS_TH_MAX	0x0FFF
> +#define JSA1212_PXS_TH_MIN	0x00
> +#define JSA1212_PXS_TH_MAX	0xFF
> +
> +#define JSA1212_ALS_DELAY_MS	0xC8
> +#define JSA1212_PXS_DELAY_MS	0x64
> +
> +#define JSA1212_DRIVER_NAME	"jsa1212"
> +#define JSA1212_REGMAP_NAME	"jsa1212_regmap"
> +
> +enum jsa1212_op_mode {
> +	JSA1212_OPMODE_ALS_EN,
> +	JSA1212_OPMODE_PXS_EN,
> +};
> +
> +struct jsa1212_data {
> +	struct i2c_client *client;
> +	struct mutex lock;
> +	u8 als_rng_idx;
> +	bool als_en; /* ALS enable status */
> +	bool pxs_en; /* proximity enable status */
> +	struct regmap *regmap;
> +};
> +
> +/* ALS range idx to val mapping */
> +static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
> +						128, 128, 128};
> +
> +/* Enables or disables ALS function based on status */
> +static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
> +{
> +	int ret;
> +
> +	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
> +				JSA1212_CONF_ALS_MASK,
> +				status);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->als_en = status ? true : false;
> +
> +	return ret;
> +}
> +
> +/* Enables or disables PXS function based on status */
> +static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
> +{
> +	int ret;
> +
> +	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
> +				JSA1212_CONF_PXS_MASK,
> +				status);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->pxs_en = status ? true : false;
> +
> +	return ret;
> +}
> +
> +static int jsa1212_read_als_data(struct jsa1212_data *data,
> +				unsigned int *val)
> +{
> +	int ret;
> +	u8 als_data[2];
> +
> +	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Delay for data output */
> +	msleep(JSA1212_ALS_DELAY_MS);
> +
> +	/* Read 12 bit data */
> +	ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, als_data, 2);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "als data read err\n");
> +		return ret;
> +	}
> +
> +	*val = als_data[1] << 8 | als_data[0];
This looks like an endian conversion.  If possible use one of the standard
endian conversion functions.  That way it is free if one isn't needed.
> +
> +	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int jsa1212_read_pxs_data(struct jsa1212_data *data,
> +				unsigned int *val)
> +{
> +	int ret;
> +	unsigned int pxs_data;
> +
> +	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Delay for data output */
> +	msleep(JSA1212_PXS_DELAY_MS);
> +
> +	/* Read out all data */
> +	ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "pxs data read err\n");
> +		return ret;
> +	}
> +
> +	*val = pxs_data & JSA1212_PXS_DATA_MASK;
> +
> +	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int jsa1212_read_raw(struct iio_dev *indio_dev,
> +				struct iio_chan_spec const *chan,
> +				int *val, int *val2, long mask)
> +{
> +	int ret;
> +	struct jsa1212_data *data = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		mutex_lock(&data->lock);
> +		switch (chan->type) {
> +		case IIO_LIGHT:
> +			ret = jsa1212_read_als_data(data, val);
> +			break;
> +		case IIO_PROXIMITY:
> +			ret = jsa1212_read_pxs_data(data, val);
> +			break;
> +		default:
> +			ret = -EINVAL;
> +			break;
> +		}
> +		ret = ret < 0 ? ret : IIO_VAL_INT;
> +		mutex_unlock(&data->lock);
> +		break;
> +	case IIO_CHAN_INFO_SCALE:
> +		switch (chan->type) {
> +		case IIO_LIGHT:
> +			*val = jsa1212_als_range_val[data->als_rng_idx];
> +			*val2 = BIT(12); /* Max 12 bit value */
> +			ret = IIO_VAL_FRACTIONAL;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +			break;
> +		}
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct iio_chan_spec jsa1212_channels[] = {
> +	{
> +		.type = IIO_LIGHT,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +			BIT(IIO_CHAN_INFO_SCALE),
> +	},
> +	{
> +		.type = IIO_PROXIMITY,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +	}
> +};
> +
> +static const struct iio_info jsa1212_info = {
> +	.driver_module		= THIS_MODULE,
> +	.read_raw		= &jsa1212_read_raw,
> +};
> +
> +static int jsa1212_chip_init(struct jsa1212_data *data)
> +{
> +	int ret;
> +
> +	ret = regmap_write(data->regmap, JSA1212_CONF_REG,
> +				JSA1212_CONF_REG_DEF);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_write(data->regmap, JSA1212_INT_REG,
> +				JSA1212_INT_REG_DEF);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
> +
> +	return 0;
> +}
> +
> +static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case JSA1212_PXS_DATA_REG:
> +	case JSA1212_ALS_DT1_REG:
> +	case JSA1212_ALS_DT2_REG:
> +	case JSA1212_INT_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static struct regmap_config jsa1212_regmap_config = {
> +	.name =  JSA1212_REGMAP_NAME,
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = JSA1212_MAX_REG,
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_reg = jsa1212_is_volatile_reg,
> +};
> +
> +static int jsa1212_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	struct jsa1212_data *jsa1212_data;
> +	struct iio_dev *indio_dev;
> +	struct regmap *regmap;
> +	int ret;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> +		return -ENODEV;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*jsa1212_data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "Regmap initialization failed.\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	jsa1212_data = iio_priv(indio_dev);
> +
> +	i2c_set_clientdata(client, indio_dev);
> +	jsa1212_data->client = client;
> +	jsa1212_data->regmap = regmap;
> +
> +	mutex_init(&jsa1212_data->lock);
> +
> +	ret = jsa1212_chip_init(jsa1212_data);
> +	if (ret < 0)
> +		return ret;
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->channels = jsa1212_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
> +	indio_dev->name = JSA1212_DRIVER_NAME;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	indio_dev->info = &jsa1212_info;
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "%s: register device failed\n", __func__);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> + /* power off the device */
> +static int jsa1212_power_off(struct jsa1212_data *data)
> +{
> +	int ret;
> +
> +	mutex_lock(&data->lock);
> +
> +	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
> +				JSA1212_CONF_ALS_MASK |
> +				JSA1212_CONF_PXS_MASK,
> +				JSA1212_CONF_ALS_DISABLE |
> +				JSA1212_CONF_PXS_DISABLE);
> +
> +	if (ret < 0)
> +		dev_err(&data->client->dev, "power off cmd failed\n");
> +
> +	mutex_unlock(&data->lock);
> +
> +	return ret;
> +}
> +
> +
> +static int jsa1212_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct jsa1212_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	ret = jsa1212_power_off(data);
> +
> +	iio_device_unregister(indio_dev);
I'd definitely expect the userspace interfaces to be removed before
the power off! Which is to say the two lines above are in the wrong order.

> +
> +	return ret;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int jsa1212_suspend(struct device *dev)
> +{
> +	struct jsa1212_data *data;
> +
> +	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> +
> +	return jsa1212_power_off(data);
> +}
> +
> +static int jsa1212_resume(struct device *dev)
> +{
> +	int ret = 0;
> +	struct jsa1212_data *data;
> +
> +	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> +
> +	mutex_lock(&data->lock);
> +
> +	if (data->als_en) {
> +		ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
> +		if (ret < 0) {
> +			dev_err(dev, "als resume failed\n");
When there is a mutex to unlock, it's often cleaner to have a single
point of exit and use a goto.
> +			mutex_unlock(&data->lock);
> +			return ret;
> +		}
> +	}
> +
> +	if (data->pxs_en) {
> +		ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
> +		if (ret < 0)
> +			dev_err(dev, "pxs resume failed\n");
> +	}
> +
> +	mutex_unlock(&data->lock);
> +
> +	return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
> +
> +#define JSA1212_PM_OPS (&jsa1212_pm_ops)
> +#else
> +#define JSA1212_PM_OPS NULL
> +#endif
> +
> +static const struct acpi_device_id jsa1212_acpi_match[] = {
> +	{"JSA1212", 0},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
> +
> +static const struct i2c_device_id jsa1212_id[] = {
> +	{ JSA1212_DRIVER_NAME, 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, jsa1212_id);
> +
> +static struct i2c_driver jsa1212_driver = {
> +	.driver = {
> +		.name	= JSA1212_DRIVER_NAME,
> +		.pm	= JSA1212_PM_OPS,
> +		.owner	= THIS_MODULE,
> +		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
> +	},
> +	.probe		= jsa1212_probe,
> +	.remove		= jsa1212_remove,
> +	.id_table	= jsa1212_id,
> +};
> +module_i2c_driver(jsa1212_driver);
> +
> +MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
> +MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
> +MODULE_LICENSE("GPL v2");
>