* [PATCH v1 1/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-10-06 6:35 ` Delphine CC Chiu
0 siblings, 0 replies; 8+ messages in thread
From: Delphine CC Chiu @ 2022-10-06 6:35 UTC (permalink / raw)
To: krzysztof.kozlowski
Cc: patrick, garnermic, Delphine CC Chiu, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, Arnd Bergmann,
Olof Johansson, soc, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel
Document the new compatibles used on Facebook Greatlakes
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 1895ce9de461..f12b94ddb9ec 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -75,6 +75,7 @@ properties:
- facebook,cloudripper-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
+ - facebook,greatlakes-bmc
- ibm,everest-bmc
- ibm,rainier-bmc
- ibm,tacoma-bmc
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v1 1/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-10-06 6:35 ` Delphine CC Chiu
0 siblings, 0 replies; 8+ messages in thread
From: Delphine CC Chiu @ 2022-10-06 6:35 UTC (permalink / raw)
To: krzysztof.kozlowski
Cc: patrick, garnermic, Delphine CC Chiu, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, Arnd Bergmann,
Olof Johansson, soc, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel
Document the new compatibles used on Facebook Greatlakes
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 1895ce9de461..f12b94ddb9ec 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -75,6 +75,7 @@ properties:
- facebook,cloudripper-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
+ - facebook,greatlakes-bmc
- ibm,everest-bmc
- ibm,rainier-bmc
- ibm,tacoma-bmc
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v1 2/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
2022-10-06 6:35 ` Delphine CC Chiu
@ 2022-10-06 6:35 ` Delphine CC Chiu
-1 siblings, 0 replies; 8+ messages in thread
From: Delphine CC Chiu @ 2022-10-06 6:35 UTC (permalink / raw)
To: krzysztof.kozlowski
Cc: patrick, garnermic, Delphine CC Chiu, Arnd Bergmann,
Olof Johansson, soc, Rob Herring, Krzysztof Kozlowski,
Joel Stanley, Andrew Jeffery, linux-kernel, linux-arm-kernel,
devicetree, linux-aspeed
Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.
---
--- v1 - Add documentation of board compatible (bindings)
--- - Add board compatible
--- - Remove the bootargs
--- - Revise the DTS node name
---
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-greatlakes.dts | 243 ++++++++++++++++++
2 files changed, 244 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..d9f417f2d7df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
+ aspeed-bmc-facebook-greatlakes.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..29c46d0e003e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Greatlakes BMC";
+ compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+ <&adc1 5>, <&adc1 6>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ no-hw-checksum;
+ use-ncsi;
+ mlx,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
+ ncsi-package = <1>;
+ ncsi-channel = <1>;
+ ncsi-rexmit = <1>;
+ ncsi-timeout = <2>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc2";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ multi-master;
+ ipmb0@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ multi-master;
+ ipmb1@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ multi-master;
+ ipmb2@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ multi-master;
+ ipmb3@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ // NIC EEPROM
+ eeprom@50 {
+ compatible = "st,24c32";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ multi-master;
+ ipmb9@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ temperature-sensor@4f {
+ compatible = "lm75";
+ reg = <0x4f>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc0 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default
+ &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};
+
+
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v1 2/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-10-06 6:35 ` Delphine CC Chiu
0 siblings, 0 replies; 8+ messages in thread
From: Delphine CC Chiu @ 2022-10-06 6:35 UTC (permalink / raw)
To: krzysztof.kozlowski
Cc: patrick, garnermic, Delphine CC Chiu, Arnd Bergmann,
Olof Johansson, soc, Rob Herring, Krzysztof Kozlowski,
Joel Stanley, Andrew Jeffery, linux-kernel, linux-arm-kernel,
devicetree, linux-aspeed
Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.
---
--- v1 - Add documentation of board compatible (bindings)
--- - Add board compatible
--- - Remove the bootargs
--- - Revise the DTS node name
---
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-greatlakes.dts | 243 ++++++++++++++++++
2 files changed, 244 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..d9f417f2d7df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
+ aspeed-bmc-facebook-greatlakes.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..29c46d0e003e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Greatlakes BMC";
+ compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+ <&adc1 5>, <&adc1 6>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ no-hw-checksum;
+ use-ncsi;
+ mlx,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
+ ncsi-package = <1>;
+ ncsi-channel = <1>;
+ ncsi-rexmit = <1>;
+ ncsi-timeout = <2>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc2";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ multi-master;
+ ipmb0@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ multi-master;
+ ipmb1@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ multi-master;
+ ipmb2@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ multi-master;
+ ipmb3@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ // NIC EEPROM
+ eeprom@50 {
+ compatible = "st,24c32";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ multi-master;
+ ipmb9@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ temperature-sensor@4f {
+ compatible = "lm75";
+ reg = <0x4f>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc0 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default
+ &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};
+
+
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v1 1/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
2022-10-06 6:35 ` Delphine CC Chiu
@ 2022-10-06 7:06 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-06 7:06 UTC (permalink / raw)
To: Delphine CC Chiu, krzysztof.kozlowski
Cc: patrick, garnermic, Rob Herring, Krzysztof Kozlowski,
Joel Stanley, Andrew Jeffery, Arnd Bergmann, Olof Johansson, soc,
devicetree, linux-arm-kernel, linux-aspeed, linux-kernel
On 06/10/2022 08:35, Delphine CC Chiu wrote:
> Document the new compatibles used on Facebook Greatlakes
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
> ---
This is v2, not v1.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 1/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-10-06 7:06 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-06 7:06 UTC (permalink / raw)
To: Delphine CC Chiu, krzysztof.kozlowski
Cc: patrick, garnermic, Rob Herring, Krzysztof Kozlowski,
Joel Stanley, Andrew Jeffery, Arnd Bergmann, Olof Johansson, soc,
devicetree, linux-arm-kernel, linux-aspeed, linux-kernel
On 06/10/2022 08:35, Delphine CC Chiu wrote:
> Document the new compatibles used on Facebook Greatlakes
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
> ---
This is v2, not v1.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
2022-10-06 6:35 ` Delphine CC Chiu
@ 2022-10-06 7:10 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-06 7:10 UTC (permalink / raw)
To: Delphine CC Chiu, krzysztof.kozlowski
Cc: patrick, garnermic, Arnd Bergmann, Olof Johansson, soc,
Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
linux-kernel, linux-arm-kernel, devicetree, linux-aspeed
On 06/10/2022 08:35, Delphine CC Chiu wrote:
> Add linux device tree entry related to
> greatlakes specific devices connected to BMC SoC.
>
> ---
> --- v1 - Add documentation of board compatible (bindings)
> --- - Add board compatible
> --- - Remove the bootargs
> --- - Revise the DTS node name
> ---
This is v3, not v1, because you resent first patch twice Changelog does
not go above SoB. You can see the problem easily - save your patch, git
am xxx.mbox, git show
Subject is wrong. Use subject prefixes matching the subsystem (git log
--oneline -- ...).
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/aspeed-bmc-facebook-greatlakes.dts | 243 ++++++++++++++++++
> 2 files changed, 244 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 05d8aef6e5d2..d9f417f2d7df 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-elbert.dtb \
> aspeed-bmc-facebook-fuji.dtb \
> aspeed-bmc-facebook-galaxy100.dtb \
> + aspeed-bmc-facebook-greatlakes.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> new file mode 100644
> index 000000000000..29c46d0e003e
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2022 Facebook Inc.
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Greatlakes BMC";
> + compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
> + <&adc1 5>, <&adc1 6>;
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&wdt1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> + aspeed,reset-type = "soc";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> + aspeed,ext-pulse-duration = <256>;
> +};
> +
> +&mac3 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii4_default>;
> + no-hw-checksum;
> + use-ncsi;
> + mlx,multi-host;
> + ncsi-ctrl,start-redo-probe;
> + ncsi-ctrl,no-channel-monitor;
> + ncsi-package = <1>;
> + ncsi-channel = <1>;
> + ncsi-rexmit = <1>;
> + ncsi-timeout = <2>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> + flash@1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc2";
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> + multi-master;
> + ipmb0@10 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Therefore: ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + multi-master;
> + ipmb1@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> + multi-master;
> + ipmb2@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> + multi-master;
> + ipmb3@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c8 {
> + status = "okay";
> + temperature-sensor@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> + // NIC EEPROM
> + eeprom@50 {
> + compatible = "st,24c32";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> + multi-master;
> + ipmb9@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> + eeprom@51 {
> + compatible = "atmel,24c128";
> + reg = <0x51>;
> + };
> + eeprom@54 {
> + compatible = "atmel,24c128";
> + reg = <0x54>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> + temperature-sensor@4f {
> + compatible = "lm75";
> + reg = <0x4f>;
> + };
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&adc0 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
> + &pinctrl_adc11_default &pinctrl_adc12_default
> + &pinctrl_adc13_default &pinctrl_adc14_default>;
> +};
> +
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
> +};
> +
> +
No need for two blank lines at the end. Drop both.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-10-06 7:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-06 7:10 UTC (permalink / raw)
To: Delphine CC Chiu, krzysztof.kozlowski
Cc: patrick, garnermic, Arnd Bergmann, Olof Johansson, soc,
Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
linux-kernel, linux-arm-kernel, devicetree, linux-aspeed
On 06/10/2022 08:35, Delphine CC Chiu wrote:
> Add linux device tree entry related to
> greatlakes specific devices connected to BMC SoC.
>
> ---
> --- v1 - Add documentation of board compatible (bindings)
> --- - Add board compatible
> --- - Remove the bootargs
> --- - Revise the DTS node name
> ---
This is v3, not v1, because you resent first patch twice Changelog does
not go above SoB. You can see the problem easily - save your patch, git
am xxx.mbox, git show
Subject is wrong. Use subject prefixes matching the subsystem (git log
--oneline -- ...).
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/aspeed-bmc-facebook-greatlakes.dts | 243 ++++++++++++++++++
> 2 files changed, 244 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 05d8aef6e5d2..d9f417f2d7df 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-elbert.dtb \
> aspeed-bmc-facebook-fuji.dtb \
> aspeed-bmc-facebook-galaxy100.dtb \
> + aspeed-bmc-facebook-greatlakes.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> new file mode 100644
> index 000000000000..29c46d0e003e
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2022 Facebook Inc.
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Greatlakes BMC";
> + compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
> + <&adc1 5>, <&adc1 6>;
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&wdt1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> + aspeed,reset-type = "soc";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> + aspeed,ext-pulse-duration = <256>;
> +};
> +
> +&mac3 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii4_default>;
> + no-hw-checksum;
> + use-ncsi;
> + mlx,multi-host;
> + ncsi-ctrl,start-redo-probe;
> + ncsi-ctrl,no-channel-monitor;
> + ncsi-package = <1>;
> + ncsi-channel = <1>;
> + ncsi-rexmit = <1>;
> + ncsi-timeout = <2>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> + flash@1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc2";
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> + multi-master;
> + ipmb0@10 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Therefore: ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + multi-master;
> + ipmb1@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> + multi-master;
> + ipmb2@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> + multi-master;
> + ipmb3@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c8 {
> + status = "okay";
> + temperature-sensor@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> + // NIC EEPROM
> + eeprom@50 {
> + compatible = "st,24c32";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> + multi-master;
> + ipmb9@10 {
ipmb@10
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> + eeprom@51 {
> + compatible = "atmel,24c128";
> + reg = <0x51>;
> + };
> + eeprom@54 {
> + compatible = "atmel,24c128";
> + reg = <0x54>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> + temperature-sensor@4f {
> + compatible = "lm75";
> + reg = <0x4f>;
> + };
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&adc0 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
> + &pinctrl_adc11_default &pinctrl_adc12_default
> + &pinctrl_adc13_default &pinctrl_adc14_default>;
> +};
> +
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
> +};
> +
> +
No need for two blank lines at the end. Drop both.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-10-06 7:11 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-06 6:35 [PATCH v1 1/2] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC Delphine CC Chiu
2022-10-06 6:35 ` Delphine CC Chiu
2022-10-06 6:35 ` [PATCH v1 2/2] " Delphine CC Chiu
2022-10-06 6:35 ` Delphine CC Chiu
2022-10-06 7:10 ` Krzysztof Kozlowski
2022-10-06 7:10 ` Krzysztof Kozlowski
2022-10-06 7:06 ` [PATCH v1 1/2] " Krzysztof Kozlowski
2022-10-06 7:06 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.