* [BUG]u-boot no boots from SD-card on NXP T2080RDB development board
@ 2021-02-04 22:59 ` Jeff Hering
2021-02-05 6:17 ` Jaehoon Chung
0 siblings, 1 reply; 2+ messages in thread
From: Jeff Hering @ 2021-02-04 22:59 UTC (permalink / raw)
To: u-boot
The 2020.10 tagged build works on the T2080RDB card, however, all tags starting with 2021.01-rc1 no long boot from SD-card on the development system. This might also apply to other QorIQ development boards.
Here is a dump of the crash which occurs very early in the process (the left column is a timestamp):
000000.000: .
000000.409:
000000.410: SD boot...
000000.415: No max bus width provided. Assume 8-bit supported.
000003.972: MMC init failed
000003.975: Initializing....using SPD
000004.323: 2 GiB left unmapped
000004.327: Bad trap at PC: 200000, SR: 21200, vector=800
000004.332: NIP: 00000000 XER: 00000000 LR: 00000000 REGS: 200000 TRAP: 2000
000004.334: 0000 DAR: 00000000
000004.338: MSR: 00021200 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
000004.338:
000004.344: GPR00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000004.351: GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000004.358: GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000004.365: GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000004.368: Call backtrace:
000004.371: Exception in kernel pc 200000 signal 0
000004.375: ### ERROR ### Please RESET the board ###
^ permalink raw reply [flat|nested] 2+ messages in thread
* [BUG]u-boot no boots from SD-card on NXP T2080RDB development board
2021-02-04 22:59 ` [BUG]u-boot no boots from SD-card on NXP T2080RDB development board Jeff Hering
@ 2021-02-05 6:17 ` Jaehoon Chung
0 siblings, 0 replies; 2+ messages in thread
From: Jaehoon Chung @ 2021-02-05 6:17 UTC (permalink / raw)
To: u-boot
On 2/5/21 7:59 AM, Jeff Hering wrote:
> The 2020.10 tagged build works on the T2080RDB card, however, all tags starting with 2021.01-rc1 no long boot from SD-card on the development system. This might also apply to other QorIQ development boards.
>
> Here is a dump of the crash which occurs very early in the process (the left column is a timestamp):
>
> 000000.000: .
> 000000.409:
> 000000.410: SD boot...
> 000000.415: No max bus width provided. Assume 8-bit supported.
I'm not sure but it seems that bus-width is not correct.
> 000003.972: MMC init failed
> 000003.975: Initializing....using SPD
> 000004.323: 2 GiB left unmapped
> 000004.327: Bad trap at PC: 200000, SR: 21200, vector=800
> 000004.332: NIP: 00000000 XER: 00000000 LR: 00000000 REGS: 200000 TRAP: 2000
> 000004.334: 0000 DAR: 00000000
> 000004.338: MSR: 00021200 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
> 000004.338:
> 000004.344: GPR00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 000004.351: GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 000004.358: GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 000004.365: GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 000004.368: Call backtrace:
> 000004.371: Exception in kernel pc 200000 signal 0
> 000004.375: ### ERROR ### Please RESET the board ###
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-05 6:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20210205043221epcas1p10bd184b9143f44ffc64a4e58dfab64c0@epcas1p1.samsung.com>
2021-02-04 22:59 ` [BUG]u-boot no boots from SD-card on NXP T2080RDB development board Jeff Hering
2021-02-05 6:17 ` Jaehoon Chung
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.