[PATCH v2 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence

From: Varadarajan Narayanan <quic_varada@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>,
	<konrad.dybcio@linaro.org>, <vkoul@kernel.org>,
	<kishon@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <gregkh@linuxfoundation.org>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>,
	<quic_wcheng@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
	<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-clk@vger.kernel.org>
Cc: Varadarajan Narayanan <quic_varada@quicinc.com>,
	Praveenkumar I <quic_ipkumar@quicinc.com>
Subject: [PATCH v2 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
Date: Tue, 21 Mar 2023 14:24:24 +0530	[thread overview]
Message-ID: <aaa7a5d3b067e09367d691431fd777a794e4a974.1679388632.git.quic_varada@quicinc.com> (raw)
In-Reply-To: <cover.1679388632.git.quic_varada@quicinc.com>

Updated USB QMP PHY Init sequence based on HPG for IPQ9574.
Reused clock and reset list from existing targets.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

---
 Changes in v2:
	- Removed unused phy register offsets
	- Moved the clock entries to the correct place
	- Maintain sorted order
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 119 ++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index a49711c..51894b9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -94,6 +94,7 @@ enum qphy_reg_layout {
 	QPHY_PCS_STATUS,
 	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
@@ -139,6 +140,97 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const unsigned int usb3phy_regs_layout[] = {
+	[QPHY_SW_RESET]				= 0x00,
+	[QPHY_START_CTRL]			= 0x08,
+	[QPHY_PCS_STATUS]			= 0x17c,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]		= 0x0d4,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]	= 0x0d8,
+	[QPHY_PCS_POWER_DOWN_CONTROL]		= 0x04,
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	/* PLL and Loop filter settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xAB),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xAA),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xA0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xAA),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	/* SSC settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7D),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0A),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1510,6 +1602,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 }
 
 /* list of clocks required by phy */
+static const char * const ipq9574_phy_clk_l[] = {
+	"aux", "cfg_ahb",
+};
+
 static const char * const msm8996_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref",
 };
@@ -1586,6 +1682,26 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.regs			= qmp_v3_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
+	.lanes			= 1,
+
+	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+	.tx_tbl			= ipq9574_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_tx_tbl),
+	.rx_tbl			= ipq9574_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_rx_tbl),
+	.pcs_tbl		= ipq9574_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
+	.clk_list		= ipq9574_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(ipq9574_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -2589,6 +2705,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 		.compatible = "qcom,ipq8074-qmp-usb3-phy",
 		.data = &ipq8074_usb3phy_cfg,
 	}, {
+		.compatible = "qcom,ipq9574-qmp-usb3-phy",
+		.data = &ipq9574_usb3phy_cfg,
+	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
 	}, {
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
