From: Vincent Pelletier <plr.vincent@gmail.com> To: Rob Herring <robh+dt@kernel.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Qiu Wenbo <qiuwenbo@kylinos.com.cn>, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, David Abdurachmanov <david.abdurachmanov@sifive.com> Subject: [PATCH v3 6/6] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Date: Fri, 19 Nov 2021 22:55:42 +0000 [thread overview] Message-ID: <ab42d60d325249d805d99db1c3981dd1fe9422eb.1637362542.git.plr.vincent@gmail.com> (raw) In-Reply-To: <378c64fb868b595430b0068a9af10fdbeceb8e12.1637362542.git.plr.vincent@gmail.com> Fixes the following probe warning: lm90 0-004c: Looking up vcc-supply from device tree lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed lm90 0-004c: supply vcc not found, using dummy regulator Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> --- Changes since v2: - Fix end-of-commit-message separator so change lists do not end up in them. Changes since v1: - Remove trailing "." on subject line. - Added a commit description. --- arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index 1abad0eec02e..1a952dec74bb 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -59,6 +59,7 @@ regulator@1e { temperature-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; + vcc-supply = <&vdd_bpro>; interrupt-parent = <&gpio>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; -- 2.33.1
WARNING: multiple messages have this Message-ID (diff)
From: Vincent Pelletier <plr.vincent@gmail.com> To: Rob Herring <robh+dt@kernel.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Qiu Wenbo <qiuwenbo@kylinos.com.cn>, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, David Abdurachmanov <david.abdurachmanov@sifive.com> Subject: [PATCH v3 6/6] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Date: Fri, 19 Nov 2021 22:55:42 +0000 [thread overview] Message-ID: <ab42d60d325249d805d99db1c3981dd1fe9422eb.1637362542.git.plr.vincent@gmail.com> (raw) In-Reply-To: <378c64fb868b595430b0068a9af10fdbeceb8e12.1637362542.git.plr.vincent@gmail.com> Fixes the following probe warning: lm90 0-004c: Looking up vcc-supply from device tree lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed lm90 0-004c: supply vcc not found, using dummy regulator Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> --- Changes since v2: - Fix end-of-commit-message separator so change lists do not end up in them. Changes since v1: - Remove trailing "." on subject line. - Added a commit description. --- arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index 1abad0eec02e..1a952dec74bb 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -59,6 +59,7 @@ regulator@1e { temperature-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; + vcc-supply = <&vdd_bpro>; interrupt-parent = <&gpio>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; -- 2.33.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2021-11-19 22:56 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-19 22:55 [PATCH v3 1/6] riscv: dts: sifive unmatched: Name gpio lines Vincent Pelletier 2021-11-19 22:55 ` Vincent Pelletier 2021-11-19 22:55 ` [PATCH v3 2/6] riscv: dts: sifive unmatched: Expose the board ID eeprom Vincent Pelletier 2021-11-19 22:55 ` Vincent Pelletier 2021-11-21 17:23 ` Krzysztof Kozlowski 2021-11-21 17:23 ` Krzysztof Kozlowski 2021-11-19 22:55 ` [PATCH v3 3/6] riscv: dts: sifive unmatched: Expose the PMIC sub-functions Vincent Pelletier 2021-11-19 22:55 ` Vincent Pelletier 2021-11-19 22:55 ` [PATCH v3 4/6] riscv: dts: sifive unmatched: Expose the FU740 core supply regulator Vincent Pelletier 2021-11-19 22:55 ` Vincent Pelletier 2021-11-21 17:24 ` Krzysztof Kozlowski 2021-11-21 17:24 ` Krzysztof Kozlowski 2021-12-17 5:35 ` Palmer Dabbelt 2021-12-17 5:35 ` Palmer Dabbelt 2021-12-19 21:56 ` Heiko Stübner 2021-12-19 21:56 ` Heiko Stübner 2021-12-19 22:14 ` Rob Herring 2021-12-19 22:14 ` Rob Herring 2021-11-19 22:55 ` [PATCH v3 5/6] riscv: dts: sifive unmatched: Fix regulator for board rev3 Vincent Pelletier 2021-11-19 22:55 ` Vincent Pelletier 2021-12-02 21:42 ` Palmer Dabbelt 2021-12-02 21:42 ` Palmer Dabbelt 2021-12-03 3:55 ` David Abdurachmanov 2021-12-03 3:55 ` David Abdurachmanov 2021-11-19 22:55 ` Vincent Pelletier [this message] 2021-11-19 22:55 ` [PATCH v3 6/6] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Vincent Pelletier 2021-11-21 17:25 ` Krzysztof Kozlowski 2021-11-21 17:25 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ab42d60d325249d805d99db1c3981dd1fe9422eb.1637362542.git.plr.vincent@gmail.com \ --to=plr.vincent@gmail.com \ --cc=aou@eecs.berkeley.edu \ --cc=david.abdurachmanov@sifive.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=qiuwenbo@kylinos.com.cn \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.