All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drivers: firmware: xilinx: Add support for feature check
@ 2019-11-12  8:35 ` Rajan Vaja
  0 siblings, 0 replies; 4+ messages in thread
From: Rajan Vaja @ 2019-11-12  8:35 UTC (permalink / raw)
  To: michal.simek, jolly.shah, nava.manne, ravi.patel, tejas.patel
  Cc: linux-arm-kernel, linux-kernel, Rajan Vaja

From: Ravi Patel <ravi.patel@xilinx.com>

Query for corresponding feature before calling EEMI API
from the driver.

Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 43 ++++++++++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h |  7 ++++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 74d9f13..ecc339d 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -26,6 +26,9 @@
 
 static const struct zynqmp_eemi_ops *eemi_ops_tbl;
 
+static bool feature_check_enabled;
+static u32 zynqmp_pm_features[PM_API_MAX];
+
 static const struct mfd_cell firmware_devs[] = {
 	{
 		.name = "zynqmp_power_controller",
@@ -44,6 +47,8 @@ static int zynqmp_pm_ret_code(u32 ret_status)
 	case XST_PM_SUCCESS:
 	case XST_PM_DOUBLE_REQ:
 		return 0;
+	case XST_PM_NO_FEATURE:
+		return -ENOTSUPP;
 	case XST_PM_NO_ACCESS:
 		return -EACCES;
 	case XST_PM_ABORT_SUSPEND:
@@ -129,6 +134,39 @@ static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
 }
 
 /**
+ * zynqmp_pm_feature() - Check weather given feature is supported or not
+ * @api_id:		API ID to check
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_feature(u32 api_id)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	u64 smc_arg[2];
+
+	if (!feature_check_enabled)
+		return 0;
+
+	/* Return value if feature is already checked */
+	if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED)
+		return zynqmp_pm_features[api_id];
+
+	smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
+	smc_arg[1] = api_id;
+
+	ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
+	if (ret) {
+		zynqmp_pm_features[api_id] = PM_FEATURE_INVALID;
+		return PM_FEATURE_INVALID;
+	}
+
+	zynqmp_pm_features[api_id] = ret_payload[1];
+
+	return zynqmp_pm_features[api_id];
+}
+
+/**
  * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
  *			   caller function depending on the configuration
  * @pm_api_id:		Requested PM-API call
@@ -162,6 +200,9 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
 	 */
 	u64 smc_arg[4];
 
+	if (zynqmp_pm_feature(pm_api_id) == PM_FEATURE_INVALID)
+		return -ENOTSUPP;
+
 	smc_arg[0] = PM_SIP_SVC | pm_api_id;
 	smc_arg[1] = ((u64)arg1 << 32) | arg0;
 	smc_arg[2] = ((u64)arg3 << 32) | arg2;
@@ -717,6 +758,8 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
 		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
 		if (!np)
 			return 0;
+
+		feature_check_enabled = true;
 	}
 	of_node_put(np);
 
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 74d710d..f0d4558 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -48,6 +48,10 @@
 #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
 #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
 
+/* Feature check status */
+#define PM_FEATURE_INVALID		-1
+#define PM_FEATURE_UNCHECKED		0
+
 /*
  * Firmware FPGA Manager flags
  * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
@@ -78,11 +82,14 @@ enum pm_api_id {
 	PM_CLOCK_GETRATE,
 	PM_CLOCK_SETPARENT,
 	PM_CLOCK_GETPARENT,
+	PM_FEATURE_CHECK = 63,
+	PM_API_MAX,
 };
 
 /* PMU-FW return status codes */
 enum pm_ret_status {
 	XST_PM_SUCCESS = 0,
+	XST_PM_NO_FEATURE = 19,
 	XST_PM_INTERNAL = 2000,
 	XST_PM_CONFLICT,
 	XST_PM_NO_ACCESS,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH] drivers: firmware: xilinx: Add support for feature check
@ 2019-11-12  8:35 ` Rajan Vaja
  0 siblings, 0 replies; 4+ messages in thread
From: Rajan Vaja @ 2019-11-12  8:35 UTC (permalink / raw)
  To: michal.simek, jolly.shah, nava.manne, ravi.patel, tejas.patel
  Cc: Rajan Vaja, linux-kernel, linux-arm-kernel

From: Ravi Patel <ravi.patel@xilinx.com>

Query for corresponding feature before calling EEMI API
from the driver.

Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 43 ++++++++++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h |  7 ++++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 74d9f13..ecc339d 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -26,6 +26,9 @@
 
 static const struct zynqmp_eemi_ops *eemi_ops_tbl;
 
+static bool feature_check_enabled;
+static u32 zynqmp_pm_features[PM_API_MAX];
+
 static const struct mfd_cell firmware_devs[] = {
 	{
 		.name = "zynqmp_power_controller",
@@ -44,6 +47,8 @@ static int zynqmp_pm_ret_code(u32 ret_status)
 	case XST_PM_SUCCESS:
 	case XST_PM_DOUBLE_REQ:
 		return 0;
+	case XST_PM_NO_FEATURE:
+		return -ENOTSUPP;
 	case XST_PM_NO_ACCESS:
 		return -EACCES;
 	case XST_PM_ABORT_SUSPEND:
@@ -129,6 +134,39 @@ static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
 }
 
 /**
+ * zynqmp_pm_feature() - Check weather given feature is supported or not
+ * @api_id:		API ID to check
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_feature(u32 api_id)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	u64 smc_arg[2];
+
+	if (!feature_check_enabled)
+		return 0;
+
+	/* Return value if feature is already checked */
+	if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED)
+		return zynqmp_pm_features[api_id];
+
+	smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
+	smc_arg[1] = api_id;
+
+	ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
+	if (ret) {
+		zynqmp_pm_features[api_id] = PM_FEATURE_INVALID;
+		return PM_FEATURE_INVALID;
+	}
+
+	zynqmp_pm_features[api_id] = ret_payload[1];
+
+	return zynqmp_pm_features[api_id];
+}
+
+/**
  * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
  *			   caller function depending on the configuration
  * @pm_api_id:		Requested PM-API call
@@ -162,6 +200,9 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
 	 */
 	u64 smc_arg[4];
 
+	if (zynqmp_pm_feature(pm_api_id) == PM_FEATURE_INVALID)
+		return -ENOTSUPP;
+
 	smc_arg[0] = PM_SIP_SVC | pm_api_id;
 	smc_arg[1] = ((u64)arg1 << 32) | arg0;
 	smc_arg[2] = ((u64)arg3 << 32) | arg2;
@@ -717,6 +758,8 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
 		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
 		if (!np)
 			return 0;
+
+		feature_check_enabled = true;
 	}
 	of_node_put(np);
 
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 74d710d..f0d4558 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -48,6 +48,10 @@
 #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
 #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
 
+/* Feature check status */
+#define PM_FEATURE_INVALID		-1
+#define PM_FEATURE_UNCHECKED		0
+
 /*
  * Firmware FPGA Manager flags
  * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
@@ -78,11 +82,14 @@ enum pm_api_id {
 	PM_CLOCK_GETRATE,
 	PM_CLOCK_SETPARENT,
 	PM_CLOCK_GETPARENT,
+	PM_FEATURE_CHECK = 63,
+	PM_API_MAX,
 };
 
 /* PMU-FW return status codes */
 enum pm_ret_status {
 	XST_PM_SUCCESS = 0,
+	XST_PM_NO_FEATURE = 19,
 	XST_PM_INTERNAL = 2000,
 	XST_PM_CONFLICT,
 	XST_PM_NO_ACCESS,
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH] drivers: firmware: xilinx: Add support for feature check
  2019-11-12  8:35 ` Rajan Vaja
@ 2019-12-12 14:48   ` Michal Simek
  -1 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2019-12-12 14:48 UTC (permalink / raw)
  To: Rajan Vaja, michal.simek, jolly.shah, nava.manne, ravi.patel,
	tejas.patel
  Cc: linux-arm-kernel, linux-kernel

On 12. 11. 19 9:35, Rajan Vaja wrote:
> From: Ravi Patel <ravi.patel@xilinx.com>
> 
> Query for corresponding feature before calling EEMI API
> from the driver.
> 
> Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 43 ++++++++++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h |  7 ++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 74d9f13..ecc339d 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -26,6 +26,9 @@
>  
>  static const struct zynqmp_eemi_ops *eemi_ops_tbl;
>  
> +static bool feature_check_enabled;
> +static u32 zynqmp_pm_features[PM_API_MAX];
> +
>  static const struct mfd_cell firmware_devs[] = {
>  	{
>  		.name = "zynqmp_power_controller",
> @@ -44,6 +47,8 @@ static int zynqmp_pm_ret_code(u32 ret_status)
>  	case XST_PM_SUCCESS:
>  	case XST_PM_DOUBLE_REQ:
>  		return 0;
> +	case XST_PM_NO_FEATURE:
> +		return -ENOTSUPP;
>  	case XST_PM_NO_ACCESS:
>  		return -EACCES;
>  	case XST_PM_ABORT_SUSPEND:
> @@ -129,6 +134,39 @@ static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
>  }
>  
>  /**
> + * zynqmp_pm_feature() - Check weather given feature is supported or not
> + * @api_id:		API ID to check
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_feature(u32 api_id)
> +{
> +	int ret;
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +	u64 smc_arg[2];
> +
> +	if (!feature_check_enabled)
> +		return 0;
> +
> +	/* Return value if feature is already checked */
> +	if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED)
> +		return zynqmp_pm_features[api_id];
> +
> +	smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
> +	smc_arg[1] = api_id;
> +
> +	ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
> +	if (ret) {
> +		zynqmp_pm_features[api_id] = PM_FEATURE_INVALID;
> +		return PM_FEATURE_INVALID;
> +	}
> +
> +	zynqmp_pm_features[api_id] = ret_payload[1];
> +
> +	return zynqmp_pm_features[api_id];
> +}
> +
> +/**
>   * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
>   *			   caller function depending on the configuration
>   * @pm_api_id:		Requested PM-API call
> @@ -162,6 +200,9 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
>  	 */
>  	u64 smc_arg[4];
>  
> +	if (zynqmp_pm_feature(pm_api_id) == PM_FEATURE_INVALID)
> +		return -ENOTSUPP;
> +
>  	smc_arg[0] = PM_SIP_SVC | pm_api_id;
>  	smc_arg[1] = ((u64)arg1 << 32) | arg0;
>  	smc_arg[2] = ((u64)arg3 << 32) | arg2;
> @@ -717,6 +758,8 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
>  		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
>  		if (!np)
>  			return 0;
> +
> +		feature_check_enabled = true;
>  	}
>  	of_node_put(np);
>  
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 74d710d..f0d4558 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -48,6 +48,10 @@
>  #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
>  #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
>  
> +/* Feature check status */
> +#define PM_FEATURE_INVALID		-1
> +#define PM_FEATURE_UNCHECKED		0
> +
>  /*
>   * Firmware FPGA Manager flags
>   * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
> @@ -78,11 +82,14 @@ enum pm_api_id {
>  	PM_CLOCK_GETRATE,
>  	PM_CLOCK_SETPARENT,
>  	PM_CLOCK_GETPARENT,
> +	PM_FEATURE_CHECK = 63,
> +	PM_API_MAX,
>  };
>  
>  /* PMU-FW return status codes */
>  enum pm_ret_status {
>  	XST_PM_SUCCESS = 0,
> +	XST_PM_NO_FEATURE = 19,
>  	XST_PM_INTERNAL = 2000,
>  	XST_PM_CONFLICT,
>  	XST_PM_NO_ACCESS,
> 

Applied to zynqmp/soc branch and queue to v5.6.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH] drivers: firmware: xilinx: Add support for feature check
@ 2019-12-12 14:48   ` Michal Simek
  0 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2019-12-12 14:48 UTC (permalink / raw)
  To: Rajan Vaja, michal.simek, jolly.shah, nava.manne, ravi.patel,
	tejas.patel
  Cc: linux-kernel, linux-arm-kernel

On 12. 11. 19 9:35, Rajan Vaja wrote:
> From: Ravi Patel <ravi.patel@xilinx.com>
> 
> Query for corresponding feature before calling EEMI API
> from the driver.
> 
> Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 43 ++++++++++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h |  7 ++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 74d9f13..ecc339d 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -26,6 +26,9 @@
>  
>  static const struct zynqmp_eemi_ops *eemi_ops_tbl;
>  
> +static bool feature_check_enabled;
> +static u32 zynqmp_pm_features[PM_API_MAX];
> +
>  static const struct mfd_cell firmware_devs[] = {
>  	{
>  		.name = "zynqmp_power_controller",
> @@ -44,6 +47,8 @@ static int zynqmp_pm_ret_code(u32 ret_status)
>  	case XST_PM_SUCCESS:
>  	case XST_PM_DOUBLE_REQ:
>  		return 0;
> +	case XST_PM_NO_FEATURE:
> +		return -ENOTSUPP;
>  	case XST_PM_NO_ACCESS:
>  		return -EACCES;
>  	case XST_PM_ABORT_SUSPEND:
> @@ -129,6 +134,39 @@ static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
>  }
>  
>  /**
> + * zynqmp_pm_feature() - Check weather given feature is supported or not
> + * @api_id:		API ID to check
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_feature(u32 api_id)
> +{
> +	int ret;
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +	u64 smc_arg[2];
> +
> +	if (!feature_check_enabled)
> +		return 0;
> +
> +	/* Return value if feature is already checked */
> +	if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED)
> +		return zynqmp_pm_features[api_id];
> +
> +	smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
> +	smc_arg[1] = api_id;
> +
> +	ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
> +	if (ret) {
> +		zynqmp_pm_features[api_id] = PM_FEATURE_INVALID;
> +		return PM_FEATURE_INVALID;
> +	}
> +
> +	zynqmp_pm_features[api_id] = ret_payload[1];
> +
> +	return zynqmp_pm_features[api_id];
> +}
> +
> +/**
>   * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
>   *			   caller function depending on the configuration
>   * @pm_api_id:		Requested PM-API call
> @@ -162,6 +200,9 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
>  	 */
>  	u64 smc_arg[4];
>  
> +	if (zynqmp_pm_feature(pm_api_id) == PM_FEATURE_INVALID)
> +		return -ENOTSUPP;
> +
>  	smc_arg[0] = PM_SIP_SVC | pm_api_id;
>  	smc_arg[1] = ((u64)arg1 << 32) | arg0;
>  	smc_arg[2] = ((u64)arg3 << 32) | arg2;
> @@ -717,6 +758,8 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
>  		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
>  		if (!np)
>  			return 0;
> +
> +		feature_check_enabled = true;
>  	}
>  	of_node_put(np);
>  
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 74d710d..f0d4558 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -48,6 +48,10 @@
>  #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
>  #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
>  
> +/* Feature check status */
> +#define PM_FEATURE_INVALID		-1
> +#define PM_FEATURE_UNCHECKED		0
> +
>  /*
>   * Firmware FPGA Manager flags
>   * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
> @@ -78,11 +82,14 @@ enum pm_api_id {
>  	PM_CLOCK_GETRATE,
>  	PM_CLOCK_SETPARENT,
>  	PM_CLOCK_GETPARENT,
> +	PM_FEATURE_CHECK = 63,
> +	PM_API_MAX,
>  };
>  
>  /* PMU-FW return status codes */
>  enum pm_ret_status {
>  	XST_PM_SUCCESS = 0,
> +	XST_PM_NO_FEATURE = 19,
>  	XST_PM_INTERNAL = 2000,
>  	XST_PM_CONFLICT,
>  	XST_PM_NO_ACCESS,
> 

Applied to zynqmp/soc branch and queue to v5.6.

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-12 15:03 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-12  8:35 [PATCH] drivers: firmware: xilinx: Add support for feature check Rajan Vaja
2019-11-12  8:35 ` Rajan Vaja
2019-12-12 14:48 ` Michal Simek
2019-12-12 14:48   ` Michal Simek

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.