* [meta-ti][master/dunfell][PATCH] machine: Add j784s4-evm configuration.
@ 2022-09-26 17:40 Ryan Eatmon
2022-09-26 20:17 ` Andrew Davis
0 siblings, 1 reply; 4+ messages in thread
From: Ryan Eatmon @ 2022-09-26 17:40 UTC (permalink / raw)
To: Praneeth Bajjuri, Denys Dmytriyenko, meta-ti
Adding support for j784s4-evm:
- Add configurations.
- Add firmware.
- Add u-boot.
- Add gpu support.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Randolph Sapp <rs@ti.com>
---
conf/machine/j784s4-evm-k3r5.conf | 11 +++
conf/machine/j784s4-evm.conf | 27 +++++++
recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb | 2 +-
.../ti-img-rogue-driver_1.15.6133109.bb | 6 +-
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 1 +
.../ti-img-rogue-umlibs_1.15.6133109.bb | 5 +-
recipes-kernel/linux/kernel-rdepends.inc | 2 +
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 75 +++++++++++++++++++
8 files changed, 124 insertions(+), 5 deletions(-)
create mode 100644 conf/machine/j784s4-evm-k3r5.conf
create mode 100644 conf/machine/j784s4-evm.conf
diff --git a/conf/machine/j784s4-evm-k3r5.conf b/conf/machine/j784s4-evm-k3r5.conf
new file mode 100644
index 00000000..04feebc6
--- /dev/null
+++ b/conf/machine/j784s4-evm-k3r5.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: J784S4 EVM (R5F)
+#@DESCRIPTION: Machine configuration for the TI J784S4 EVM (R5F core)
+
+require conf/machine/include/k3r5.inc
+
+SYSFW_SOC = "j784s4"
+SYSFW_CONFIG = "evm"
+SYSFW_SUFFIX = "gp"
+
+UBOOT_MACHINE = "j784s4_evm_r5_defconfig"
diff --git a/conf/machine/j784s4-evm.conf b/conf/machine/j784s4-evm.conf
new file mode 100644
index 00000000..957e5766
--- /dev/null
+++ b/conf/machine/j784s4-evm.conf
@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@NAME: J784S4 EVM
+#@DESCRIPTION: Machine configuration for the TI J784S4 EVM
+
+require conf/machine/include/j7.inc
+
+MACHINE_FEATURES += "gpu"
+
+SERIAL_CONSOLES = "115200;ttyS10"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+TFA_K3_USART = "0x8"
+OPTEE_K3_USART = "0x8"
+
+KERNEL_DEVICETREE = " \
+ ti/k3-j784s4-evm.dtb \
+"
+
+UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
+
+# J721S2 supports multi-certificate images, use the same
+IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
+
+do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+
+TFA_BOARD = "j784s4"
+
diff --git a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
index 83619090..cca5704e 100644
--- a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
+++ b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
@@ -13,7 +13,7 @@ PR = "${INC_PR}.1"
CLEANBROKEN = "1"
-COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm"
+COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm|j784s4-evm"
PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
index 3dbc87b6..1127c5d1 100644
--- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
+++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
@@ -11,7 +11,7 @@ MACHINE_KERNEL_PR_append = "b"
PR = "${MACHINE_KERNEL_PR}"
PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
+COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
DEPENDS = "virtual/kernel"
@@ -26,17 +26,19 @@ SRC_URI = " \
S = "${WORKDIR}/git"
-SRCREV = "6d3d62a15ceb85b719c35f34c6c9e35f556b406b"
+SRCREV = "ea2ac3fda4ac442b639bc3a0b73e9c4feac2081a"
TARGET_PRODUCT_j7-evm = "j721e_linux"
TARGET_PRODUCT_j7-hs-evm = "j721e_linux"
TARGET_PRODUCT_j721s2-evm = "j721s2_linux"
TARGET_PRODUCT_j721s2-hs-evm = "j721s2_linux"
+TARGET_PRODUCT_j784s4-evm = "j784s4_linux"
TARGET_PRODUCT_am62xx = "am62_linux"
TARGET_BVNC_j7-evm = "22.104.208.318"
TARGET_BVNC_j7-hs-evm = "22.104.208.318"
TARGET_BVNC_j721s2-evm = "36.53.104.796"
TARGET_BVNC_j721s2-hs-evm = "36.53.104.796"
+TARGET_BVNC_j784s4-evm = "36.53.104.796"
TARGET_BVNC_am62xx = "33.15.11.3"
PVR_BUILD = "release"
PVR_WS = "wayland"
diff --git a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
index 2a59e896..866cd7b2 100644
--- a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
+++ b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
@@ -35,6 +35,7 @@ SYSFW_PREFIX_j7200-evm-k3r5 = "fs"
SYSFW_PREFIX_j7200-hs-evm-k3r5 = "fs"
SYSFW_PREFIX_j721s2-evm-k3r5 = "fs"
SYSFW_PREFIX_j721s2-hs-evm-k3r5 = "fs"
+SYSFW_PREFIX_j784s4-evm-k3r5 = "fs"
SYSFW_PREFIX_am62xx-evm-k3r5 = "fs"
SYSFW_PREFIX_am62xx-lp-evm-k3r5 = "fs"
diff --git a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
index 323978bf..b6bb4324 100644
--- a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
+++ b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
@@ -8,19 +8,20 @@ inherit features_check
REQUIRED_MACHINE_FEATURES = "gpu"
PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
+COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
PR = "r2"
BRANCH = "linuxws/dunfell/k5.10/${PV}_unified_fw_pagesize"
SRC_URI = "git://git.ti.com/git/graphics/ti-img-rogue-umlibs.git;protocol=https;branch=${BRANCH}"
-SRCREV = "fba0c770b712640ab3761dbe8369d43f89f616ed"
+SRCREV = "4207c0ea429ec751b1ff5f831a84ceeb76ad578d"
TARGET_PRODUCT_j7-evm = "j721e_linux"
TARGET_PRODUCT_j7-hs-evm = "j721e_linux"
TARGET_PRODUCT_j721s2-evm = "j721s2_linux"
TARGET_PRODUCT_j721s2-hs-evm = "j721s2_linux"
+TARGET_PRODUCT_j784s4-evm = "j784s4_linux"
TARGET_PRODUCT_am62xx = "am62_linux"
PVR_BUILD ?= "release"
PVR_WS = "wayland"
diff --git a/recipes-kernel/linux/kernel-rdepends.inc b/recipes-kernel/linux/kernel-rdepends.inc
index ae855a88..8225a5af 100644
--- a/recipes-kernel/linux/kernel-rdepends.inc
+++ b/recipes-kernel/linux/kernel-rdepends.inc
@@ -42,6 +42,7 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j7-evm = " cadence-mhdp-fw"
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j7-hs-evm = " cadence-mhdp-fw"
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j721s2-evm = " cadence-mhdp-fw"
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j721s2-hs-evm = " cadence-mhdp-fw"
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j784s4-evm = " cadence-mhdp-fw"
# Add run-time dependency for Video Decoding firmware to the rootfs
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j7 = " vxd-dec-fw"
@@ -49,6 +50,7 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j7 = " vxd-dec-fw"
# Add run-time dependency for Chips&Media Wave521 firmware to the rootfs
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j721s2-evm = " cnm-wave-fw"
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j721s2-hs-evm = " cnm-wave-fw"
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_j784s4-evm = " cnm-wave-fw"
# Add run-time dependency for TIFS Low Power Module stub
RDEPENDS_${KERNEL_PACKAGE_NAME}-base_append_am62xx-evm = " tifs-lpm-stub"
diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index afff8d15..68c93ae7 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,6 +19,7 @@ PLAT_SFX_j7200-evm = "j7200"
PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_j721s2-hs-evm = "j721s2"
+PLAT_SFX_j784s4-evm = "j784s4"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
PLAT_SFX_am62xx = "am62xx"
@@ -247,6 +248,26 @@ do_install_j721s2-hs-evm() {
# install -m 0644 ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f ${LEGACY_ETH_FW_DIR}
}
+do_install_j784s4-evm() {
+ install -d ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_1_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_2_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_3_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_4_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
+ # DM Firmware
+ install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
+ # ETH firmware
+ install -d ${LEGACY_ETH_FW_DIR}
+ install -m 0644 ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f ${LEGACY_ETH_FW_DIR}
+}
+
do_install_am65xx() {
install -d ${LEGACY_IPC_FW_DIR}
install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
@@ -372,6 +393,21 @@ ALTERNATIVE_${PN}_j721s2-hs-evm = "\
j721s2-c71_1-fw-sec \
"
+ALTERNATIVE_${PN}_j784s4-evm = "\
+ j784s4-mcu-r5f0_0-fw \
+ j784s4-mcu-r5f0_1-fw \
+ j784s4-main-r5f0_0-fw \
+ j784s4-main-r5f0_1-fw \
+ j784s4-main-r5f1_0-fw \
+ j784s4-main-r5f1_1-fw \
+ j784s4-main-r5f2_0-fw \
+ j784s4-main-r5f2_1-fw \
+ j784s4-c71_0-fw \
+ j784s4-c71_1-fw \
+ j784s4-c71_2-fw \
+ j784s4-c71_3-fw \
+ "
+
# Set up link names for the firmwares
TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
@@ -442,6 +478,19 @@ TARGET_MAIN_R5FSS1_1_SIGNED_j721s2-hs-evm = "j721s2-main-r5f1_1-fw-sec"
TARGET_C7X_0_SIGNED_j721s2-hs-evm = "j721s2-c71_0-fw-sec"
TARGET_C7X_1_SIGNED_j721s2-hs-evm = "j721s2-c71_1-fw-sec"
+TARGET_MCU_R5FSS0_0_j784s4-evm = "j784s4-mcu-r5f0_0-fw"
+TARGET_MCU_R5FSS0_1_j784s4-evm = "j784s4-mcu-r5f0_1-fw"
+TARGET_MAIN_R5FSS0_0_j784s4-evm = "j784s4-main-r5f0_0-fw"
+TARGET_MAIN_R5FSS0_1_j784s4-evm = "j784s4-main-r5f0_1-fw"
+TARGET_MAIN_R5FSS1_0_j784s4-evm = "j784s4-main-r5f1_0-fw"
+TARGET_MAIN_R5FSS1_1_j784s4-evm = "j784s4-main-r5f1_1-fw"
+TARGET_MAIN_R5FSS2_0_j784s4-evm = "j784s4-main-r5f2_0-fw"
+TARGET_MAIN_R5FSS2_1_j784s4-evm = "j784s4-main-r5f2_1-fw"
+TARGET_C7X_0_j784s4-evm = "j784s4-c71_0-fw"
+TARGET_C7X_1_j784s4-evm = "j784s4-c71_1-fw"
+TARGET_C7X_2_j784s4-evm = "j784s4-c71_2-fw"
+TARGET_C7X_3_j784s4-evm = "j784s4-c71_3-fw"
+
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
@@ -496,6 +545,19 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw-sec] = "${base_libdir}/firmware/${TA
ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw-sec] = "${base_libdir}/firmware/${TARGET_C7X_0_SIGNED}"
ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw-sec] = "${base_libdir}/firmware/${TARGET_C7X_1_SIGNED}"
+ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
+ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_1}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_0-fw] = "${base_libdir}/firmware/${TARGET_C7X_0}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_1-fw] = "${base_libdir}/firmware/${TARGET_C7X_1}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_2-fw] = "${base_libdir}/firmware/${TARGET_C7X_2}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_3-fw] = "${base_libdir}/firmware/${TARGET_C7X_3}"
+
# Create the firmware alternatives
ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
@@ -552,6 +614,19 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw-sec] = "${base_libdir}/firmware/pdk-ipc
ALTERNATIVE_TARGET[j721s2-c71_0-fw-sec] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71.signed"
ALTERNATIVE_TARGET[j721s2-c71_1-fw-sec] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71.signed"
+ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-mcu-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f1_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f2_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f2_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-c71_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_2-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_3_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_3-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_4_release_strip.xe71"
+
ALTERNATIVE_PRIORITY = "10"
# make sure that lib/firmware, and all its contents are part of the package
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [meta-ti][master/dunfell][PATCH] machine: Add j784s4-evm configuration.
2022-09-26 17:40 [meta-ti][master/dunfell][PATCH] machine: Add j784s4-evm configuration Ryan Eatmon
@ 2022-09-26 20:17 ` Andrew Davis
2022-09-26 20:50 ` Ryan Eatmon
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Davis @ 2022-09-26 20:17 UTC (permalink / raw)
To: reatmon, Praneeth Bajjuri, Denys Dmytriyenko, meta-ti
On 9/26/22 12:40 PM, Ryan Eatmon via lists.yoctoproject.org wrote:
> Adding support for j784s4-evm:
> - Add configurations.
> - Add firmware.
> - Add u-boot.
> - Add gpu support.
>
> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> Signed-off-by: Randolph Sapp <rs@ti.com>
> ---
> conf/machine/j784s4-evm-k3r5.conf | 11 +++
> conf/machine/j784s4-evm.conf | 27 +++++++
> recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb | 2 +-
> .../ti-img-rogue-driver_1.15.6133109.bb | 6 +-
> recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 1 +
> .../ti-img-rogue-umlibs_1.15.6133109.bb | 5 +-
> recipes-kernel/linux/kernel-rdepends.inc | 2 +
> recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 75 +++++++++++++++++++
> 8 files changed, 124 insertions(+), 5 deletions(-)
> create mode 100644 conf/machine/j784s4-evm-k3r5.conf
> create mode 100644 conf/machine/j784s4-evm.conf
>
> diff --git a/conf/machine/j784s4-evm-k3r5.conf b/conf/machine/j784s4-evm-k3r5.conf
> new file mode 100644
> index 00000000..04feebc6
> --- /dev/null
> +++ b/conf/machine/j784s4-evm-k3r5.conf
> @@ -0,0 +1,11 @@
> +#@TYPE: Machine
> +#@NAME: J784S4 EVM (R5F)
> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM (R5F core)
> +
> +require conf/machine/include/k3r5.inc
> +
> +SYSFW_SOC = "j784s4"
> +SYSFW_CONFIG = "evm"
> +SYSFW_SUFFIX = "gp"
> +
> +UBOOT_MACHINE = "j784s4_evm_r5_defconfig"
> diff --git a/conf/machine/j784s4-evm.conf b/conf/machine/j784s4-evm.conf
> new file mode 100644
> index 00000000..957e5766
> --- /dev/null
> +++ b/conf/machine/j784s4-evm.conf
> @@ -0,0 +1,27 @@
> +#@TYPE: Machine
> +#@NAME: J784S4 EVM
> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM
> +
> +require conf/machine/include/j7.inc
> +
> +MACHINE_FEATURES += "gpu"
> +
> +SERIAL_CONSOLES = "115200;ttyS10"
> +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
> +TFA_K3_USART = "0x8"
> +OPTEE_K3_USART = "0x8"
> +
> +KERNEL_DEVICETREE = " \
> + ti/k3-j784s4-evm.dtb \
> +"
> +
> +UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
> +
> +# J721S2 supports multi-certificate images, use the same
> +IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
> +
> +do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
> +do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
> +
> +TFA_BOARD = "j784s4"
> +
> diff --git a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> index 83619090..cca5704e 100644
> --- a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> +++ b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> @@ -13,7 +13,7 @@ PR = "${INC_PR}.1"
>
> CLEANBROKEN = "1"
>
> -COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm"
> +COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm|j784s4-evm"
>
> PACKAGE_ARCH = "${MACHINE_ARCH}"
>
> diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> index 3dbc87b6..1127c5d1 100644
> --- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> +++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> @@ -11,7 +11,7 @@ MACHINE_KERNEL_PR_append = "b"
> PR = "${MACHINE_KERNEL_PR}"
>
> PACKAGE_ARCH = "${MACHINE_ARCH}"
> -COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
> +COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
j784s4-evm.conf should include a j784s4.inc family file, then here
you'll only need |j784s4|. Makes it easier when adding machines
based on the j784s4 SoC.
>
> DEPENDS = "virtual/kernel"
>
> @@ -26,17 +26,19 @@ SRC_URI = " \
>
> S = "${WORKDIR}/git"
...
> --- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
> +++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
> @@ -19,6 +19,7 @@ PLAT_SFX_j7200-evm = "j7200"
> PLAT_SFX_j7200-hs-evm = "j7200"
> PLAT_SFX_j721s2-evm = "j721s2"
> PLAT_SFX_j721s2-hs-evm = "j721s2"
> +PLAT_SFX_j784s4-evm = "j784s4"
> PLAT_SFX_am65xx = "am65xx"
> PLAT_SFX_am64xx = "am64xx"
> PLAT_SFX_am62xx = "am62xx"
> @@ -247,6 +248,26 @@ do_install_j721s2-hs-evm() {
> # install -m 0644 ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f ${LEGACY_ETH_FW_DIR}
> }
>
> +do_install_j784s4-evm() {
> + install -d ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_1_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_1_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_2_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_3_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
> + install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_4_release_strip.xe71 ${LEGACY_IPC_FW_DIR}
> + # DM Firmware
> + install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
> + # ETH firmware
> + install -d ${LEGACY_ETH_FW_DIR}
> + install -m 0644 ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f ${LEGACY_ETH_FW_DIR}
> +}
> +
I wonder if there is a way to better add these than just long lists,
this file's size is getting out of hand :/
Andrew
> do_install_am65xx() {
> install -d ${LEGACY_IPC_FW_DIR}
> install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
> @@ -372,6 +393,21 @@ ALTERNATIVE_${PN}_j721s2-hs-evm = "\
> j721s2-c71_1-fw-sec \
> "
>
> +ALTERNATIVE_${PN}_j784s4-evm = "\
> + j784s4-mcu-r5f0_0-fw \
> + j784s4-mcu-r5f0_1-fw \
> + j784s4-main-r5f0_0-fw \
> + j784s4-main-r5f0_1-fw \
> + j784s4-main-r5f1_0-fw \
> + j784s4-main-r5f1_1-fw \
> + j784s4-main-r5f2_0-fw \
> + j784s4-main-r5f2_1-fw \
> + j784s4-c71_0-fw \
> + j784s4-c71_1-fw \
> + j784s4-c71_2-fw \
> + j784s4-c71_3-fw \
> + "
> +
> # Set up link names for the firmwares
>
> TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
> @@ -442,6 +478,19 @@ TARGET_MAIN_R5FSS1_1_SIGNED_j721s2-hs-evm = "j721s2-main-r5f1_1-fw-sec"
> TARGET_C7X_0_SIGNED_j721s2-hs-evm = "j721s2-c71_0-fw-sec"
> TARGET_C7X_1_SIGNED_j721s2-hs-evm = "j721s2-c71_1-fw-sec"
>
> +TARGET_MCU_R5FSS0_0_j784s4-evm = "j784s4-mcu-r5f0_0-fw"
> +TARGET_MCU_R5FSS0_1_j784s4-evm = "j784s4-mcu-r5f0_1-fw"
> +TARGET_MAIN_R5FSS0_0_j784s4-evm = "j784s4-main-r5f0_0-fw"
> +TARGET_MAIN_R5FSS0_1_j784s4-evm = "j784s4-main-r5f0_1-fw"
> +TARGET_MAIN_R5FSS1_0_j784s4-evm = "j784s4-main-r5f1_0-fw"
> +TARGET_MAIN_R5FSS1_1_j784s4-evm = "j784s4-main-r5f1_1-fw"
> +TARGET_MAIN_R5FSS2_0_j784s4-evm = "j784s4-main-r5f2_0-fw"
> +TARGET_MAIN_R5FSS2_1_j784s4-evm = "j784s4-main-r5f2_1-fw"
> +TARGET_C7X_0_j784s4-evm = "j784s4-c71_0-fw"
> +TARGET_C7X_1_j784s4-evm = "j784s4-c71_1-fw"
> +TARGET_C7X_2_j784s4-evm = "j784s4-c71_2-fw"
> +TARGET_C7X_3_j784s4-evm = "j784s4-c71_3-fw"
> +
> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
>
> @@ -496,6 +545,19 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw-sec] = "${base_libdir}/firmware/${TA
> ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw-sec] = "${base_libdir}/firmware/${TARGET_C7X_0_SIGNED}"
> ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw-sec] = "${base_libdir}/firmware/${TARGET_C7X_1_SIGNED}"
>
> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_1}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_0}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_0}"
> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_1}"
> +ALTERNATIVE_LINK_NAME[j784s4-c71_0-fw] = "${base_libdir}/firmware/${TARGET_C7X_0}"
> +ALTERNATIVE_LINK_NAME[j784s4-c71_1-fw] = "${base_libdir}/firmware/${TARGET_C7X_1}"
> +ALTERNATIVE_LINK_NAME[j784s4-c71_2-fw] = "${base_libdir}/firmware/${TARGET_C7X_2}"
> +ALTERNATIVE_LINK_NAME[j784s4-c71_3-fw] = "${base_libdir}/firmware/${TARGET_C7X_3}"
> +
> # Create the firmware alternatives
>
> ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
> @@ -552,6 +614,19 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw-sec] = "${base_libdir}/firmware/pdk-ipc
> ALTERNATIVE_TARGET[j721s2-c71_0-fw-sec] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71.signed"
> ALTERNATIVE_TARGET[j721s2-c71_1-fw-sec] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71.signed"
>
> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_1_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f1_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_0_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_1_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f2_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_0_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-main-r5f2_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_1_release_strip.xer5f"
> +ALTERNATIVE_TARGET[j784s4-c71_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
> +ALTERNATIVE_TARGET[j784s4-c71_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"
> +ALTERNATIVE_TARGET[j784s4-c71_2-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_3_release_strip.xe71"
> +ALTERNATIVE_TARGET[j784s4-c71_3-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_4_release_strip.xe71"
> +
> ALTERNATIVE_PRIORITY = "10"
>
> # make sure that lib/firmware, and all its contents are part of the package
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [meta-ti][master/dunfell][PATCH] machine: Add j784s4-evm configuration.
2022-09-26 20:17 ` Andrew Davis
@ 2022-09-26 20:50 ` Ryan Eatmon
2022-10-07 20:46 ` [master/dunfell][PATCH] " Jonathan Humphreys
0 siblings, 1 reply; 4+ messages in thread
From: Ryan Eatmon @ 2022-09-26 20:50 UTC (permalink / raw)
To: Andrew Davis, Praneeth Bajjuri, Denys Dmytriyenko, meta-ti
On 9/26/2022 15:17, Andrew Davis wrote:
> On 9/26/22 12:40 PM, Ryan Eatmon via lists.yoctoproject.org wrote:
>> Adding support for j784s4-evm:
>> - Add configurations.
>> - Add firmware.
>> - Add u-boot.
>> - Add gpu support.
>>
>> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
>> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
>> Signed-off-by: Randolph Sapp <rs@ti.com>
>> ---
>> conf/machine/j784s4-evm-k3r5.conf | 11 +++
>> conf/machine/j784s4-evm.conf | 27 +++++++
>> recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb | 2 +-
>> .../ti-img-rogue-driver_1.15.6133109.bb | 6 +-
>> recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 1 +
>> .../ti-img-rogue-umlibs_1.15.6133109.bb | 5 +-
>> recipes-kernel/linux/kernel-rdepends.inc | 2 +
>> recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 75 +++++++++++++++++++
>> 8 files changed, 124 insertions(+), 5 deletions(-)
>> create mode 100644 conf/machine/j784s4-evm-k3r5.conf
>> create mode 100644 conf/machine/j784s4-evm.conf
>>
>> diff --git a/conf/machine/j784s4-evm-k3r5.conf
>> b/conf/machine/j784s4-evm-k3r5.conf
>> new file mode 100644
>> index 00000000..04feebc6
>> --- /dev/null
>> +++ b/conf/machine/j784s4-evm-k3r5.conf
>> @@ -0,0 +1,11 @@
>> +#@TYPE: Machine
>> +#@NAME: J784S4 EVM (R5F)
>> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM (R5F core)
>> +
>> +require conf/machine/include/k3r5.inc
>> +
>> +SYSFW_SOC = "j784s4"
>> +SYSFW_CONFIG = "evm"
>> +SYSFW_SUFFIX = "gp"
>> +
>> +UBOOT_MACHINE = "j784s4_evm_r5_defconfig"
>> diff --git a/conf/machine/j784s4-evm.conf b/conf/machine/j784s4-evm.conf
>> new file mode 100644
>> index 00000000..957e5766
>> --- /dev/null
>> +++ b/conf/machine/j784s4-evm.conf
>> @@ -0,0 +1,27 @@
>> +#@TYPE: Machine
>> +#@NAME: J784S4 EVM
>> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM
>> +
>> +require conf/machine/include/j7.inc
>> +
>> +MACHINE_FEATURES += "gpu"
>> +
>> +SERIAL_CONSOLES = "115200;ttyS10"
>> +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
>> +TFA_K3_USART = "0x8"
>> +OPTEE_K3_USART = "0x8"
>> +
>> +KERNEL_DEVICETREE = " \
>> + ti/k3-j784s4-evm.dtb \
>> +"
>> +
>> +UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
>> +
>> +# J721S2 supports multi-certificate images, use the same
>> +IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
>> +
>> +do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
>> +do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
>> +
>> +TFA_BOARD = "j784s4"
>> +
>> diff --git a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
>> b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
>> index 83619090..cca5704e 100644
>> --- a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
>> +++ b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
>> @@ -13,7 +13,7 @@ PR = "${INC_PR}.1"
>> CLEANBROKEN = "1"
>> -COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm"
>> +COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm|j784s4-evm"
>> PACKAGE_ARCH = "${MACHINE_ARCH}"
>> diff --git
>> a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
>> b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
>> index 3dbc87b6..1127c5d1 100644
>> --- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
>> +++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
>> @@ -11,7 +11,7 @@ MACHINE_KERNEL_PR_append = "b"
>> PR = "${MACHINE_KERNEL_PR}"
>> PACKAGE_ARCH = "${MACHINE_ARCH}"
>> -COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
>> +COMPATIBLE_MACHINE =
>> "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
>
>
> j784s4-evm.conf should include a j784s4.inc family file, then here
> you'll only need |j784s4|. Makes it easier when adding machines
> based on the j784s4 SoC.
>
>
>> DEPENDS = "virtual/kernel"
>> @@ -26,17 +26,19 @@ SRC_URI = " \
>> S = "${WORKDIR}/git"
>
> ...
>
>> --- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
>> +++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
>> @@ -19,6 +19,7 @@ PLAT_SFX_j7200-evm = "j7200"
>> PLAT_SFX_j7200-hs-evm = "j7200"
>> PLAT_SFX_j721s2-evm = "j721s2"
>> PLAT_SFX_j721s2-hs-evm = "j721s2"
>> +PLAT_SFX_j784s4-evm = "j784s4"
>> PLAT_SFX_am65xx = "am65xx"
>> PLAT_SFX_am64xx = "am64xx"
>> PLAT_SFX_am62xx = "am62xx"
>> @@ -247,6 +248,26 @@ do_install_j721s2-hs-evm() {
>> # install -m 0644
>> ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
>> ${LEGACY_ETH_FW_DIR}
>> }
>> +do_install_j784s4-evm() {
>> + install -d ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_1_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_0_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_1_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_0_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_1_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_0_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_1_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_1_release_strip.xe71
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_2_release_strip.xe71
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_3_release_strip.xe71
>> ${LEGACY_IPC_FW_DIR}
>> + install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_4_release_strip.xe71
>> ${LEGACY_IPC_FW_DIR}
>> + # DM Firmware
>> + install -m 0644
>> ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f
>> ${LEGACY_DM_FW_DIR}
>> + # ETH firmware
>> + install -d ${LEGACY_ETH_FW_DIR}
>> + install -m 0644
>> ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
>> ${LEGACY_ETH_FW_DIR}
>> +}
>> +
>
>
> I wonder if there is a way to better add these than just long lists,
> this file's size is getting out of hand :/
>
> Andrew
Compeltely agree. I like all of the clean up done so far. We just need
to figure out a better solution for the firmware as well.
>
>> do_install_am65xx() {
>> install -d ${LEGACY_IPC_FW_DIR}
>> install -m 0644
>> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_0_release_strip.xer5f
>> ${LEGACY_IPC_FW_DIR}
>> @@ -372,6 +393,21 @@ ALTERNATIVE_${PN}_j721s2-hs-evm = "\
>> j721s2-c71_1-fw-sec \
>> "
>> +ALTERNATIVE_${PN}_j784s4-evm = "\
>> + j784s4-mcu-r5f0_0-fw \
>> + j784s4-mcu-r5f0_1-fw \
>> + j784s4-main-r5f0_0-fw \
>> + j784s4-main-r5f0_1-fw \
>> + j784s4-main-r5f1_0-fw \
>> + j784s4-main-r5f1_1-fw \
>> + j784s4-main-r5f2_0-fw \
>> + j784s4-main-r5f2_1-fw \
>> + j784s4-c71_0-fw \
>> + j784s4-c71_1-fw \
>> + j784s4-c71_2-fw \
>> + j784s4-c71_3-fw \
>> + "
>> +
>> # Set up link names for the firmwares
>> TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
>> @@ -442,6 +478,19 @@ TARGET_MAIN_R5FSS1_1_SIGNED_j721s2-hs-evm =
>> "j721s2-main-r5f1_1-fw-sec"
>> TARGET_C7X_0_SIGNED_j721s2-hs-evm = "j721s2-c71_0-fw-sec"
>> TARGET_C7X_1_SIGNED_j721s2-hs-evm = "j721s2-c71_1-fw-sec"
>> +TARGET_MCU_R5FSS0_0_j784s4-evm = "j784s4-mcu-r5f0_0-fw"
>> +TARGET_MCU_R5FSS0_1_j784s4-evm = "j784s4-mcu-r5f0_1-fw"
>> +TARGET_MAIN_R5FSS0_0_j784s4-evm = "j784s4-main-r5f0_0-fw"
>> +TARGET_MAIN_R5FSS0_1_j784s4-evm = "j784s4-main-r5f0_1-fw"
>> +TARGET_MAIN_R5FSS1_0_j784s4-evm = "j784s4-main-r5f1_0-fw"
>> +TARGET_MAIN_R5FSS1_1_j784s4-evm = "j784s4-main-r5f1_1-fw"
>> +TARGET_MAIN_R5FSS2_0_j784s4-evm = "j784s4-main-r5f2_0-fw"
>> +TARGET_MAIN_R5FSS2_1_j784s4-evm = "j784s4-main-r5f2_1-fw"
>> +TARGET_C7X_0_j784s4-evm = "j784s4-c71_0-fw"
>> +TARGET_C7X_1_j784s4-evm = "j784s4-c71_1-fw"
>> +TARGET_C7X_2_j784s4-evm = "j784s4-c71_2-fw"
>> +TARGET_C7X_3_j784s4-evm = "j784s4-c71_3-fw"
>> +
>> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] =
>> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
>> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] =
>> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
>> @@ -496,6 +545,19 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw-sec]
>> = "${base_libdir}/firmware/${TA
>> ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw-sec] =
>> "${base_libdir}/firmware/${TARGET_C7X_0_SIGNED}"
>> ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw-sec] =
>> "${base_libdir}/firmware/${TARGET_C7X_1_SIGNED}"
>> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] =
>> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
>> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_1-fw] =
>> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_0-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_1-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_1}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_0-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_0}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_1-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_0-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_0}"
>> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_1-fw] =
>> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_1}"
>> +ALTERNATIVE_LINK_NAME[j784s4-c71_0-fw] =
>> "${base_libdir}/firmware/${TARGET_C7X_0}"
>> +ALTERNATIVE_LINK_NAME[j784s4-c71_1-fw] =
>> "${base_libdir}/firmware/${TARGET_C7X_1}"
>> +ALTERNATIVE_LINK_NAME[j784s4-c71_2-fw] =
>> "${base_libdir}/firmware/${TARGET_C7X_2}"
>> +ALTERNATIVE_LINK_NAME[j784s4-c71_3-fw] =
>> "${base_libdir}/firmware/${TARGET_C7X_3}"
>> +
>> # Create the firmware alternatives
>> ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
>>
>> @@ -552,6 +614,19 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw-sec] =
>> "${base_libdir}/firmware/pdk-ipc
>> ALTERNATIVE_TARGET[j721s2-c71_0-fw-sec] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71.signed"
>>
>> ALTERNATIVE_TARGET[j721s2-c71_1-fw-sec] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71.signed"
>>
>> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_1-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f0_1-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_1_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f1_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_0_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f1_1-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_1_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f2_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_0_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-main-r5f2_1-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_1_release_strip.xer5f"
>>
>> +ALTERNATIVE_TARGET[j784s4-c71_0-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
>> +ALTERNATIVE_TARGET[j784s4-c71_1-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"
>> +ALTERNATIVE_TARGET[j784s4-c71_2-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_3_release_strip.xe71"
>> +ALTERNATIVE_TARGET[j784s4-c71_3-fw] =
>> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_4_release_strip.xe71"
>> +
>> ALTERNATIVE_PRIORITY = "10"
>> # make sure that lib/firmware, and all its contents are part of the
>> package
>>
>>
--
Ryan Eatmon reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc. - LCPD - MGTS
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [master/dunfell][PATCH] machine: Add j784s4-evm configuration.
2022-09-26 20:50 ` Ryan Eatmon
@ 2022-10-07 20:46 ` Jonathan Humphreys
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Humphreys @ 2022-10-07 20:46 UTC (permalink / raw)
To: meta-ti
On Mon, Sep 26, 2022 at 01:50 PM, Ryan Eatmon wrote:
>
>
>
> On 9/26/2022 15:17, Andrew Davis wrote:
> > On 9/26/22 12:40 PM, Ryan Eatmon via lists.yoctoproject.org wrote:
> >> Adding support for j784s4-evm:
> >> - Add configurations.
> >> - Add firmware.
> >> - Add u-boot.
> >> - Add gpu support.
> >>
> >> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
> >> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> >> Signed-off-by: Randolph Sapp <rs@ti.com>
> >> ---
> >> conf/machine/j784s4-evm-k3r5.conf | 11 +++
> >> conf/machine/j784s4-evm.conf | 27
> +++++++
> >> recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb | 2 +-
> >> .../ti-img-rogue-driver_1.15.6133109.bb | 6 +-
> >> recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 1 +
> >> .../ti-img-rogue-umlibs_1.15.6133109.bb | 5 +-
> >> recipes-kernel/linux/kernel-rdepends.inc | 2 +
> >> recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 75
> +++++++++++++++++++
> >> 8 files changed, 124 insertions(+), 5 deletions(-)
> >> create mode 100644 conf/machine/j784s4-evm-k3r5.conf
> >> create mode 100644 conf/machine/j784s4-evm.conf
> >>
> >> diff --git a/conf/machine/j784s4-evm-k3r5.conf
> >> b/conf/machine/j784s4-evm-k3r5.conf
> >> new file mode 100644
> >> index 00000000..04feebc6
> >> --- /dev/null
> >> +++ b/conf/machine/j784s4-evm-k3r5.conf
> >> @@ -0,0 +1,11 @@
> >> +#@TYPE: Machine
> >> +#@NAME: J784S4 EVM (R5F)
> >> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM (R5F core)
> >> +
> >> +require conf/machine/include/k3r5.inc
> >> +
> >> +SYSFW_SOC = "j784s4"
> >> +SYSFW_CONFIG = "evm"
> >> +SYSFW_SUFFIX = "gp"
> >> +
> >> +UBOOT_MACHINE = "j784s4_evm_r5_defconfig"
> >> diff --git a/conf/machine/j784s4-evm.conf b/conf/machine/j784s4-evm.conf
> >> new file mode 100644
> >> index 00000000..957e5766
> >> --- /dev/null
> >> +++ b/conf/machine/j784s4-evm.conf
> >> @@ -0,0 +1,27 @@
> >> +#@TYPE: Machine
> >> +#@NAME: J784S4 EVM
> >> +#@DESCRIPTION: Machine configuration for the TI J784S4 EVM
> >> +
> >> +require conf/machine/include/j7.inc
> >> +
> >> +MACHINE_FEATURES += "gpu"
> >> +
> >> +SERIAL_CONSOLES = "115200;ttyS10"
Please change to ttyS2.
This is a bug fix similar to what I posted for J721S2 at https://lists.yoctoproject.org/g/meta-ti/message/15116.
> >> +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
> >> +TFA_K3_USART = "0x8"
> >> +OPTEE_K3_USART = "0x8"
> >> +
> >> +KERNEL_DEVICETREE = " \
> >> + ti/k3-j784s4-evm.dtb \
> >> +"
> >> +
> >> +UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
> >> +
> >> +# J721S2 supports multi-certificate images, use the same
> >> +IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
> >> +
> >> +do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
> >> +do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
> >> +
> >> +TFA_BOARD = "j784s4"
> >> +
> >> diff --git a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> >> b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> >> index 83619090..cca5704e 100644
> >> --- a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> >> +++ b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
> >> @@ -13,7 +13,7 @@ PR = "${INC_PR}.1"
> >> CLEANBROKEN = "1"
> >> -COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm"
> >> +COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm|j784s4-evm"
> >> PACKAGE_ARCH = "${MACHINE_ARCH}"
> >> diff --git
> >> a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> >> b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> >> index 3dbc87b6..1127c5d1 100644
> >> --- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> >> +++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
> >> @@ -11,7 +11,7 @@ MACHINE_KERNEL_PR_append = "b"
> >> PR = "${MACHINE_KERNEL_PR}"
> >> PACKAGE_ARCH = "${MACHINE_ARCH}"
> >> -COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
> >> +COMPATIBLE_MACHINE =
> >> "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
> >
> >
> > j784s4-evm.conf should include a j784s4.inc family file, then here
> > you'll only need |j784s4|. Makes it easier when adding machines
> > based on the j784s4 SoC.
> >
> >
> >> DEPENDS = "virtual/kernel"
> >> @@ -26,17 +26,19 @@ SRC_URI = " \
> >> S = "${WORKDIR}/git"
> >
> > ...
> >
> >> --- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
> >> +++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
> >> @@ -19,6 +19,7 @@ PLAT_SFX_j7200-evm = "j7200"
> >> PLAT_SFX_j7200-hs-evm = "j7200"
> >> PLAT_SFX_j721s2-evm = "j721s2"
> >> PLAT_SFX_j721s2-hs-evm = "j721s2"
> >> +PLAT_SFX_j784s4-evm = "j784s4"
> >> PLAT_SFX_am65xx = "am65xx"
> >> PLAT_SFX_am64xx = "am64xx"
> >> PLAT_SFX_am62xx = "am62xx"
> >> @@ -247,6 +248,26 @@ do_install_j721s2-hs-evm() {
> >> # install -m 0644
> >> ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
> >> ${LEGACY_ETH_FW_DIR}
> >> }
> >> +do_install_j784s4-evm() {
> >> + install -d ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_1_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_0_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_1_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_0_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_1_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_0_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_1_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_1_release_strip.xe71
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_2_release_strip.xe71
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_3_release_strip.xe71
> >> ${LEGACY_IPC_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_4_release_strip.xe71
> >> ${LEGACY_IPC_FW_DIR}
> >> + # DM Firmware
> >> + install -m 0644
> >> ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f
> >> ${LEGACY_DM_FW_DIR}
> >> + # ETH firmware
> >> + install -d ${LEGACY_ETH_FW_DIR}
> >> + install -m 0644
> >> ${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
> >> ${LEGACY_ETH_FW_DIR}
> >> +}
> >> +
> >
> >
> > I wonder if there is a way to better add these than just long lists,
> > this file's size is getting out of hand :/
> >
> > Andrew
>
> Compeltely agree. I like all of the clean up done so far. We just need
> to figure out a better solution for the firmware as well.
>
>
> >
> >> do_install_am65xx() {
> >> install -d ${LEGACY_IPC_FW_DIR}
> >> install -m 0644
> >> ${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_0_release_strip.xer5f
> >> ${LEGACY_IPC_FW_DIR}
> >> @@ -372,6 +393,21 @@ ALTERNATIVE_${PN}_j721s2-hs-evm = "\
> >> j721s2-c71_1-fw-sec \
> >> "
> >> +ALTERNATIVE_${PN}_j784s4-evm = "\
> >> + j784s4-mcu-r5f0_0-fw \
> >> + j784s4-mcu-r5f0_1-fw \
> >> + j784s4-main-r5f0_0-fw \
> >> + j784s4-main-r5f0_1-fw \
> >> + j784s4-main-r5f1_0-fw \
> >> + j784s4-main-r5f1_1-fw \
> >> + j784s4-main-r5f2_0-fw \
> >> + j784s4-main-r5f2_1-fw \
> >> + j784s4-c71_0-fw \
> >> + j784s4-c71_1-fw \
> >> + j784s4-c71_2-fw \
> >> + j784s4-c71_3-fw \
> >> + "
> >> +
> >> # Set up link names for the firmwares
> >> TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
> >> @@ -442,6 +478,19 @@ TARGET_MAIN_R5FSS1_1_SIGNED_j721s2-hs-evm =
> >> "j721s2-main-r5f1_1-fw-sec"
> >> TARGET_C7X_0_SIGNED_j721s2-hs-evm = "j721s2-c71_0-fw-sec"
> >> TARGET_C7X_1_SIGNED_j721s2-hs-evm = "j721s2-c71_1-fw-sec"
> >> +TARGET_MCU_R5FSS0_0_j784s4-evm = "j784s4-mcu-r5f0_0-fw"
> >> +TARGET_MCU_R5FSS0_1_j784s4-evm = "j784s4-mcu-r5f0_1-fw"
> >> +TARGET_MAIN_R5FSS0_0_j784s4-evm = "j784s4-main-r5f0_0-fw"
> >> +TARGET_MAIN_R5FSS0_1_j784s4-evm = "j784s4-main-r5f0_1-fw"
> >> +TARGET_MAIN_R5FSS1_0_j784s4-evm = "j784s4-main-r5f1_0-fw"
> >> +TARGET_MAIN_R5FSS1_1_j784s4-evm = "j784s4-main-r5f1_1-fw"
> >> +TARGET_MAIN_R5FSS2_0_j784s4-evm = "j784s4-main-r5f2_0-fw"
> >> +TARGET_MAIN_R5FSS2_1_j784s4-evm = "j784s4-main-r5f2_1-fw"
> >> +TARGET_C7X_0_j784s4-evm = "j784s4-c71_0-fw"
> >> +TARGET_C7X_1_j784s4-evm = "j784s4-c71_1-fw"
> >> +TARGET_C7X_2_j784s4-evm = "j784s4-c71_2-fw"
> >> +TARGET_C7X_3_j784s4-evm = "j784s4-c71_3-fw"
> >> +
> >> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
> >> ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
> >> @@ -496,6 +545,19 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw-sec]
> >> = "${base_libdir}/firmware/${TA
> >> ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw-sec] =
> >> "${base_libdir}/firmware/${TARGET_C7X_0_SIGNED}"
> >> ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw-sec] =
> >> "${base_libdir}/firmware/${TARGET_C7X_1_SIGNED}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_1}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_0}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_0}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_1}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-c71_0-fw] =
> >> "${base_libdir}/firmware/${TARGET_C7X_0}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-c71_1-fw] =
> >> "${base_libdir}/firmware/${TARGET_C7X_1}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-c71_2-fw] =
> >> "${base_libdir}/firmware/${TARGET_C7X_2}"
> >> +ALTERNATIVE_LINK_NAME[j784s4-c71_3-fw] =
> >> "${base_libdir}/firmware/${TARGET_C7X_3}"
> >> +
> >> # Create the firmware alternatives
> >> ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
> >>
> >> @@ -552,6 +614,19 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw-sec] =
> >> "${base_libdir}/firmware/pdk-ipc
> >> ALTERNATIVE_TARGET[j721s2-c71_0-fw-sec] =
> >>
> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71.signed"
>
> >>
> >> ALTERNATIVE_TARGET[j721s2-c71_1-fw-sec] =
> >>
> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71.signed"
>
> >>
> >> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
>
> >>
> >> +ALTERNATIVE_TARGET[j784s4-mcu-r5f0_1-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f0_1-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_1_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f1_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_0_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f1_1-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_1_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f2_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_0_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-main-r5f2_1-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_1_release_strip.xer5f"
> >>
> >> +ALTERNATIVE_TARGET[j784s4-c71_0-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
> >> +ALTERNATIVE_TARGET[j784s4-c71_1-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"
> >> +ALTERNATIVE_TARGET[j784s4-c71_2-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_3_release_strip.xe71"
> >> +ALTERNATIVE_TARGET[j784s4-c71_3-fw] =
> >> "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_4_release_strip.xe71"
> >> +
> >> ALTERNATIVE_PRIORITY = "10"
> >> # make sure that lib/firmware, and all its contents are part of the
> >> package
> >>
> >>
>
> --
> Ryan Eatmon reatmon@ti.com
> -----------------------------------------
> Texas Instruments, Inc. - LCPD - MGTS
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-10-07 20:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-26 17:40 [meta-ti][master/dunfell][PATCH] machine: Add j784s4-evm configuration Ryan Eatmon
2022-09-26 20:17 ` Andrew Davis
2022-09-26 20:50 ` Ryan Eatmon
2022-10-07 20:46 ` [master/dunfell][PATCH] " Jonathan Humphreys
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.