Re: bitbake error ?

[Riko <antonius.riko@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 3791 bytes --]

This one ?

bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget 
https://www.example.com/
--2017-08-09 16:33:05--  https://www.example.com/
Resolving www.example.com (www.example.com)... failed: Name or service 
not known.
wget: unable to resolve host address 'www.example.com’


On 09/08/17 16:31, Burton, Ross wrote:
> For some reason, bitbake can't do "wget https://www.example.com/".   
> Try running that command outside of bitbake and seeing if it returns 
> any errors.
>
> Ross
>
> On 9 August 2017 at 09:29, Riko <antonius.riko@gmail.com 
> <mailto:antonius.riko@gmail.com>> wrote:
>
>     Dear Yocto Member,
>
>
>     I have downloaded fresh install of yocto but got error, here's the
>     trace :
>
>     bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro
>     git://git.yoctoproject.org/poky.git
>     <http://git.yoctoproject.org/poky.git>
>     Cloning into 'poky'...
>     remote: Counting objects: 373183, done.
>     remote: Compressing objects: 100% (89366/89366), done.
>     remote: Total 373183 (delta 277418), reused 373031 (delta 277266)
>     Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s,
>     done.
>     Resolving deltas: 100% (277418/277418), done.
>     Checking connectivity... done.
>
>
>     bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source
>     oe-init-build-env
>     You had no conf/local.conf file. This configuration file has
>     therefore been
>     created for you with some default values. You may wish to edit it
>     to, for
>     example, select a different MACHINE (target hardware). See
>     conf/local.conf
>     for more information as common configuration options are commented.
>
>     You had no conf/bblayers.conf file. This configuration file has
>     therefore been
>     created for you with some default values. To add additional
>     metadata layers
>     into your configuration please add entries to conf/bblayers.conf.
>
>     The Yocto Project has extensive documentation about OE including a
>     reference
>     manual which can be found at:
>     http://yoctoproject.org/documentation
>     <http://yoctoproject.org/documentation>
>
>     For more information about OpenEmbedded see their website:
>     http://www.openembedded.org/
>
>
>     ### Shell environment set up for builds. ###
>
>     You can now run 'bitbake <target>'
>
>     Common targets are:
>         core-image-minimal
>         core-image-sato
>         meta-toolchain
>         meta-ide-support
>
>     You can also run generated qemu images with a command like
>     'runqemu qemux86'
>     bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake
>     core-image-minimal
>     ERROR:  OE-core's config sanity checker detected a potential
>     misconfiguration.
>         Either fix the cause of this error or at your own risk disable
>     the checker (see sanity.conf).
>         Following is the list of potential problems / advisories:
>
>         Fetcher failure for URL: 'https://www.example.com/'. URL
>     https://www.example.com/ doesn't work.
>         Please ensure your host's network is configured correctly,
>         or set BB_NO_NETWORK = "1" to disable network access if
>         all required sources are on local disk.
>
>
>     Summary: There was 1 ERROR message shown, returning a non-zero
>     exit code.
>
>
>     Any suggestions ?
>
>     I'm using ubuntu 16.04,
>
>     Thanks
>
>     -- 
>     _______________________________________________
>     yocto mailing list
>     yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
>     https://lists.yoctoproject.org/listinfo/yocto
>     <https://lists.yoctoproject.org/listinfo/yocto>
>
>


[-- Attachment #2: Type: text/html, Size: 6940 bytes --]