* [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes
@ 2017-02-01 10:56 Petri Latvala
2017-02-01 13:24 ` Robert Foss
2017-02-01 18:12 ` Lyude Paul
0 siblings, 2 replies; 3+ messages in thread
From: Petri Latvala @ 2017-02-01 10:56 UTC (permalink / raw)
To: intel-gfx; +Cc: Lyude
CC: Robert Foss <robert.foss@collabora.com>
CC: Lyude <lyude@redhat.com>
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
---
tests/chamelium.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tests/chamelium.c b/tests/chamelium.c
index d914d5b..e03acc4 100644
--- a/tests/chamelium.c
+++ b/tests/chamelium.c
@@ -310,7 +310,7 @@ enable_output(data_t *data,
struct igt_fb *fb)
{
igt_display_t *display = output->display;
- igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_t *primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
drmModeConnector *connector = chamelium_port_get_connector(
data->chamelium, port, false);
@@ -341,7 +341,7 @@ disable_output(data_t *data,
igt_output_t *output)
{
igt_display_t *display = output->display;
- igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_t *primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
/* Disable the display */
@@ -364,7 +364,7 @@ test_display_crc_single(data_t *data, struct chamelium_port *port)
output = prepare_output(data, &display, port);
connector = chamelium_port_get_connector(data->chamelium, port, false);
- primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
for (i = 0; i < connector->count_modes; i++) {
@@ -418,7 +418,7 @@ test_display_crc_multiple(data_t *data, struct chamelium_port *port)
output = prepare_output(data, &display, port);
connector = chamelium_port_get_connector(data->chamelium, port, false);
- primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
for (i = 0; i < connector->count_modes; i++) {
@@ -477,7 +477,7 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
output = prepare_output(data, &display, port);
connector = chamelium_port_get_connector(data->chamelium, port, false);
- primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
for (i = 0; i < connector->count_modes; i++) {
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes
2017-02-01 10:56 [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes Petri Latvala
@ 2017-02-01 13:24 ` Robert Foss
2017-02-01 18:12 ` Lyude Paul
1 sibling, 0 replies; 3+ messages in thread
From: Robert Foss @ 2017-02-01 13:24 UTC (permalink / raw)
To: Petri Latvala, intel-gfx; +Cc: Lyude
This looks good to me, feel free to add my r-b.
Rob.
On 2017-02-01 05:56 AM, Petri Latvala wrote:
> CC: Robert Foss <robert.foss@collabora.com>
> CC: Lyude <lyude@redhat.com>
> Signed-off-by: Petri Latvala <petri.latvala@intel.com>
> ---
> tests/chamelium.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index d914d5b..e03acc4 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -310,7 +310,7 @@ enable_output(data_t *data,
> struct igt_fb *fb)
> {
> igt_display_t *display = output->display;
> - igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + igt_plane_t *primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> drmModeConnector *connector = chamelium_port_get_connector(
> data->chamelium, port, false);
>
> @@ -341,7 +341,7 @@ disable_output(data_t *data,
> igt_output_t *output)
> {
> igt_display_t *display = output->display;
> - igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + igt_plane_t *primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> /* Disable the display */
> @@ -364,7 +364,7 @@ test_display_crc_single(data_t *data, struct chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium, port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
> @@ -418,7 +418,7 @@ test_display_crc_multiple(data_t *data, struct chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium, port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
> @@ -477,7 +477,7 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium, port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes
2017-02-01 10:56 [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes Petri Latvala
2017-02-01 13:24 ` Robert Foss
@ 2017-02-01 18:12 ` Lyude Paul
1 sibling, 0 replies; 3+ messages in thread
From: Lyude Paul @ 2017-02-01 18:12 UTC (permalink / raw)
To: Petri Latvala, intel-gfx
Reviewed-by: Lyude <lyude@redhat.com>
If you need someone to push this let me know
On Wed, 2017-02-01 at 12:56 +0200, Petri Latvala wrote:
> CC: Robert Foss <robert.foss@collabora.com>
> CC: Lyude <lyude@redhat.com>
> Signed-off-by: Petri Latvala <petri.latvala@intel.com>
> ---
> tests/chamelium.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index d914d5b..e03acc4 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -310,7 +310,7 @@ enable_output(data_t *data,
> struct igt_fb *fb)
> {
> igt_display_t *display = output->display;
> - igt_plane_t *primary = igt_output_get_plane(output,
> IGT_PLANE_PRIMARY);
> + igt_plane_t *primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> drmModeConnector *connector = chamelium_port_get_connector(
> data->chamelium, port, false);
>
> @@ -341,7 +341,7 @@ disable_output(data_t *data,
> igt_output_t *output)
> {
> igt_display_t *display = output->display;
> - igt_plane_t *primary = igt_output_get_plane(output,
> IGT_PLANE_PRIMARY);
> + igt_plane_t *primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> /* Disable the display */
> @@ -364,7 +364,7 @@ test_display_crc_single(data_t *data, struct
> chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium,
> port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
> @@ -418,7 +418,7 @@ test_display_crc_multiple(data_t *data, struct
> chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium,
> port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
> @@ -477,7 +477,7 @@ test_display_frame_dump(data_t *data, struct
> chamelium_port *port)
>
> output = prepare_output(data, &display, port);
> connector = chamelium_port_get_connector(data->chamelium,
> port, false);
> - primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> for (i = 0; i < connector->count_modes; i++) {
--
Cheers,
Lyude
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-02-01 18:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-01 10:56 [PATCH i-g-t] tests/chamelium: Adapt to dynamic number of planes changes Petri Latvala
2017-02-01 13:24 ` Robert Foss
2017-02-01 18:12 ` Lyude Paul
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.