[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Sinan Kaya]

It is up to a driver to implement shutdown() callback. If shutdown()
callback is not implemented, PCI device can have pending interrupt and
even do DMA transactions while the system is going down.

If kexec is in use, this can damage the newly booting kexec kernel
or even prevent it from booting altogether. Fallback to calling the
remove() callback if shutdown() isn't implemented for a given driver.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/pci/pci-driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index cbda0e6..75a00fe 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -477,8 +477,17 @@ static void pci_device_shutdown(struct device *dev)
 
 	pm_runtime_resume(dev);
 
+	/*
+	 * Try shutdown callback if it exists, otherwise fallback to remove
+	 * callback. PCI drivers can do DMA and have pending interrupts.
+	 * Leaving the DMA and interrupts pending could damage the newly
+	 * booting kexec kernel as well as prevent it from booting altogether
+	 * if the pending interrupt is level.
+	 */
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
+	else if (drv && drv->remove)
+		drv->remove(pci_dev);
 
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the
-- 
2.7.4

[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Sinan Kaya]

It is up to a driver to implement shutdown() callback. If shutdown()
callback is not implemented, PCI device can have pending interrupt and
even do DMA transactions while the system is going down.

If kexec is in use, this can damage the newly booting kexec kernel
or even prevent it from booting altogether. Fallback to calling the
remove() callback if shutdown() isn't implemented for a given driver.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable at vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/pci/pci-driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index cbda0e6..75a00fe 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -477,8 +477,17 @@ static void pci_device_shutdown(struct device *dev)
 
 	pm_runtime_resume(dev);
 
+	/*
+	 * Try shutdown callback if it exists, otherwise fallback to remove
+	 * callback. PCI drivers can do DMA and have pending interrupts.
+	 * Leaving the DMA and interrupts pending could damage the newly
+	 * booting kexec kernel as well as prevent it from booting altogether
+	 * if the pending interrupt is level.
+	 */
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
+	else if (drv && drv->remove)
+		drv->remove(pci_dev);
 
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the
-- 
2.7.4

[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Sinan Kaya]

It is up to a driver to implement shutdown() callback. If shutdown()
callback is not implemented, PCI device can have pending interrupt and
even do DMA transactions while the system is going down.

If kexec is in use, this can damage the newly booting kexec kernel
or even prevent it from booting altogether. Fallback to calling the
remove() callback if shutdown() isn't implemented for a given driver.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/pci/pci-driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index cbda0e6..75a00fe 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -477,8 +477,17 @@ static void pci_device_shutdown(struct device *dev)
 
 	pm_runtime_resume(dev);
 
+	/*
+	 * Try shutdown callback if it exists, otherwise fallback to remove
+	 * callback. PCI drivers can do DMA and have pending interrupts.
+	 * Leaving the DMA and interrupts pending could damage the newly
+	 * booting kexec kernel as well as prevent it from booting altogether
+	 * if the pending interrupt is level.
+	 */
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
+	else if (drv && drv->remove)
+		drv->remove(pci_dev);
 
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Sinan Kaya]

It is up to a driver to implement shutdown() callback. If shutdown()
callback is not implemented, PCI device can have pending interrupt and
even do DMA transactions while the system is going down.

If kexec is in use, this can damage the newly booting kexec kernel
or even prevent it from booting altogether. Fallback to calling the
remove() callback if shutdown() isn't implemented for a given driver.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/pci/pci-driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index cbda0e6..75a00fe 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -477,8 +477,17 @@ static void pci_device_shutdown(struct device *dev)
 
 	pm_runtime_resume(dev);
 
+	/*
+	 * Try shutdown callback if it exists, otherwise fallback to remove
+	 * callback. PCI drivers can do DMA and have pending interrupts.
+	 * Leaving the DMA and interrupts pending could damage the newly
+	 * booting kexec kernel as well as prevent it from booting altogether
+	 * if the pending interrupt is level.
+	 */
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
+	else if (drv && drv->remove)
+		drv->remove(pci_dev);
 
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the
-- 
2.7.4

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Drop the shutdown API and do an orderly clean up by using the remove.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/scsi/hpsa.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..3dbef28 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8970,7 +8970,6 @@ static struct pci_driver hpsa_pci_driver = {
 	.probe = hpsa_init_one,
 	.remove = hpsa_remove_one,
 	.id_table = hpsa_pci_device_id,	/* id_table */
-	.shutdown = hpsa_shutdown,
 	.suspend = hpsa_suspend,
 	.resume = hpsa_resume,
 };
-- 
2.7.4

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Drop the shutdown API and do an orderly clean up by using the remove.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable at vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/scsi/hpsa.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..3dbef28 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8970,7 +8970,6 @@ static struct pci_driver hpsa_pci_driver = {
 	.probe = hpsa_init_one,
 	.remove = hpsa_remove_one,
 	.id_table = hpsa_pci_device_id,	/* id_table */
-	.shutdown = hpsa_shutdown,
 	.suspend = hpsa_suspend,
 	.resume = hpsa_resume,
 };
-- 
2.7.4

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Drop the shutdown API and do an orderly clean up by using the remove.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/scsi/hpsa.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..3dbef28 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8970,7 +8970,6 @@ static struct pci_driver hpsa_pci_driver = {
 	.probe = hpsa_init_one,
 	.remove = hpsa_remove_one,
 	.id_table = hpsa_pci_device_id,	/* id_table */
-	.shutdown = hpsa_shutdown,
 	.suspend = hpsa_suspend,
 	.resume = hpsa_resume,
 };
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Drop the shutdown API and do an orderly clean up by using the remove.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
---
 drivers/scsi/hpsa.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..3dbef28 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8970,7 +8970,6 @@ static struct pci_driver hpsa_pci_driver = {
 	.probe = hpsa_init_one,
 	.remove = hpsa_remove_one,
 	.id_table = hpsa_pci_device_id,	/* id_table */
-	.shutdown = hpsa_shutdown,
 	.suspend = hpsa_suspend,
 	.resume = hpsa_resume,
 };
-- 
2.7.4

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> shutdown")' has been added to kernel to shutdown pending PCIe port
> service interrupts during reboot so that a newly started kexec kernel
> wouldn't observe pending interrupts.
> 
> pcie_port_device_remove() is disabling the root port and switches by
> calling pci_disable_device() after all PCIe service drivers are shutdown.
> 
> This has been found to cause crashes on HP DL360 Gen9 machines during
> reboot due to hpsa driver not clearing the bus master bit during the
> shutdown procedure by calling pci_disable_device().
> 
> Drop the shutdown API and do an orderly clean up by using the remove.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable@vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> shutdown")' has been added to kernel to shutdown pending PCIe port
> service interrupts during reboot so that a newly started kexec kernel
> wouldn't observe pending interrupts.
> 
> pcie_port_device_remove() is disabling the root port and switches by
> calling pci_disable_device() after all PCIe service drivers are shutdown.
> 
> This has been found to cause crashes on HP DL360 Gen9 machines during
> reboot due to hpsa driver not clearing the bus master bit during the
> shutdown procedure by calling pci_disable_device().
> 
> Drop the shutdown API and do an orderly clean up by using the remove.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable at vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> shutdown")' has been added to kernel to shutdown pending PCIe port
> service interrupts during reboot so that a newly started kexec kernel
> wouldn't observe pending interrupts.
> 
> pcie_port_device_remove() is disabling the root port and switches by
> calling pci_disable_device() after all PCIe service drivers are shutdown.
> 
> This has been found to cause crashes on HP DL360 Gen9 machines during
> reboot due to hpsa driver not clearing the bus master bit during the
> shutdown procedure by calling pci_disable_device().
> 
> Drop the shutdown API and do an orderly clean up by using the remove.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable@vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Don Brace]

> -----Original Message-----
> From: Ryan Finnie [mailto:ryan@finnie.org]
> Sent: Tuesday, May 29, 2018 8:50 PM
> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci@vger.kernel.org;
> timur@codeaurora.org
> Cc: linux-arm-msm@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> stable@vger.kernel.org; Don Brace <don.brace@microsemi.com>; James E.J.
> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
> <martin.petersen@oracle.com>; esc.storagedev
> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
> kernel@vger.kernel.org>
> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
> 
> EXTERNAL EMAIL
> 
> 
> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> > shutdown")' has been added to kernel to shutdown pending PCIe port
> > service interrupts during reboot so that a newly started kexec kernel
> > wouldn't observe pending interrupts.
> >
> > pcie_port_device_remove() is disabling the root port and switches by
> > calling pci_disable_device() after all PCIe service drivers are shutdown.
> >
> > This has been found to cause crashes on HP DL360 Gen9 machines during
> > reboot due to hpsa driver not clearing the bus master bit during the
> > shutdown procedure by calling pci_disable_device().
> >
> > Drop the shutdown API and do an orderly clean up by using the remove.
> >
> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> > Cc: stable@vger.kernel.org
> > Reported-by: Ryan Finnie <ryan@finnie.org>
> 
> Tested successfully on DL360 Gen9 and DL380 Gen9.
> 
> Tested-by: Ryan Finnie <ryan@finnie.org>

The shutdown path issues a cache flush to the controller.
Without this flush, you will see "Dirty Cache" messages at POST.
It is best to keep the shutdown path.

Thanks,
Don Brace
ESC - Smart Storage
Microsemi Corporation

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Don Brace]

> -----Original Message-----
> From: Ryan Finnie [mailto:ryan at finnie.org]
> Sent: Tuesday, May 29, 2018 8:50 PM
> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci at vger.kernel.org;
> timur at codeaurora.org
> Cc: linux-arm-msm at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> stable at vger.kernel.org; Don Brace <don.brace@microsemi.com>; James E.J.
> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
> <martin.petersen@oracle.com>; esc.storagedev
> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
> kernel at vger.kernel.org>
> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
> 
> EXTERNAL EMAIL
> 
> 
> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> > shutdown")' has been added to kernel to shutdown pending PCIe port
> > service interrupts during reboot so that a newly started kexec kernel
> > wouldn't observe pending interrupts.
> >
> > pcie_port_device_remove() is disabling the root port and switches by
> > calling pci_disable_device() after all PCIe service drivers are shutdown.
> >
> > This has been found to cause crashes on HP DL360 Gen9 machines during
> > reboot due to hpsa driver not clearing the bus master bit during the
> > shutdown procedure by calling pci_disable_device().
> >
> > Drop the shutdown API and do an orderly clean up by using the remove.
> >
> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> > Cc: stable at vger.kernel.org
> > Reported-by: Ryan Finnie <ryan@finnie.org>
> 
> Tested successfully on DL360 Gen9 and DL380 Gen9.
> 
> Tested-by: Ryan Finnie <ryan@finnie.org>

The shutdown path issues a cache flush to the controller.
Without this flush, you will see "Dirty Cache" messages at POST.
It is best to keep the shutdown path.

Thanks,
Don Brace
ESC - Smart Storage
Microsemi Corporation

RE: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Don Brace]

> -----Original Message-----
> From: Ryan Finnie [mailto:ryan@finnie.org]
> Sent: Tuesday, May 29, 2018 8:50 PM
> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci@vger.kernel.org;
> timur@codeaurora.org
> Cc: linux-arm-msm@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> stable@vger.kernel.org; Don Brace <don.brace@microsemi.com>; James E.J.
> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
> <martin.petersen@oracle.com>; esc.storagedev
> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
> kernel@vger.kernel.org>
> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
> 
> EXTERNAL EMAIL
> 
> 
> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
> > shutdown")' has been added to kernel to shutdown pending PCIe port
> > service interrupts during reboot so that a newly started kexec kernel
> > wouldn't observe pending interrupts.
> >
> > pcie_port_device_remove() is disabling the root port and switches by
> > calling pci_disable_device() after all PCIe service drivers are shutdown.
> >
> > This has been found to cause crashes on HP DL360 Gen9 machines during
> > reboot due to hpsa driver not clearing the bus master bit during the
> > shutdown procedure by calling pci_disable_device().
> >
> > Drop the shutdown API and do an orderly clean up by using the remove.
> >
> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> > Cc: stable@vger.kernel.org
> > Reported-by: Ryan Finnie <ryan@finnie.org>
> 
> Tested successfully on DL360 Gen9 and DL380 Gen9.
> 
> Tested-by: Ryan Finnie <ryan@finnie.org>

The shutdown path issues a cache flush to the controller.
Without this flush, you will see "Dirty Cache" messages at POST.
It is best to keep the shutdown path.

Thanks,
Don Brace
ESC - Smart Storage
Microsemi Corporation



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[okaya]

On 2018-05-30 15:25, Don Brace wrote:
>> -----Original Message-----
>> From: Ryan Finnie [mailto:ryan@finnie.org]
>> Sent: Tuesday, May 29, 2018 8:50 PM
>> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci@vger.kernel.org;
>> timur@codeaurora.org
>> Cc: linux-arm-msm@vger.kernel.org; 
>> linux-arm-kernel@lists.infradead.org;
>> stable@vger.kernel.org; Don Brace <don.brace@microsemi.com>; James 
>> E.J.
>> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
>> <martin.petersen@oracle.com>; esc.storagedev
>> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
>> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
>> kernel@vger.kernel.org>
>> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
>> 
>> EXTERNAL EMAIL
>> 
>> 
>> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
>> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
>> > shutdown")' has been added to kernel to shutdown pending PCIe port
>> > service interrupts during reboot so that a newly started kexec kernel
>> > wouldn't observe pending interrupts.
>> >
>> > pcie_port_device_remove() is disabling the root port and switches by
>> > calling pci_disable_device() after all PCIe service drivers are shutdown.
>> >
>> > This has been found to cause crashes on HP DL360 Gen9 machines during
>> > reboot due to hpsa driver not clearing the bus master bit during the
>> > shutdown procedure by calling pci_disable_device().
>> >
>> > Drop the shutdown API and do an orderly clean up by using the remove.
>> >
>> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
>> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
>> > Cc: stable@vger.kernel.org
>> > Reported-by: Ryan Finnie <ryan@finnie.org>
>> 
>> Tested successfully on DL360 Gen9 and DL380 Gen9.
>> 
>> Tested-by: Ryan Finnie <ryan@finnie.org>
> 
> The shutdown path issues a cache flush to the controller.
> Without this flush, you will see "Dirty Cache" messages at POST.
> It is best to keep the shutdown path.
> 

I have seen that shutdown() is also called from remove().

remove() is supposed to do a safe cleanup too. If it is leaving the hw 
in inconsistent state even though it is c lling shutdown , it is yet 
another bug.

> Thanks,
> Don Brace
> ESC - Smart Storage
> Microsemi Corporation

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[okaya at codeaurora.org]

On 2018-05-30 15:25, Don Brace wrote:
>> -----Original Message-----
>> From: Ryan Finnie [mailto:ryan at finnie.org]
>> Sent: Tuesday, May 29, 2018 8:50 PM
>> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci at vger.kernel.org;
>> timur at codeaurora.org
>> Cc: linux-arm-msm at vger.kernel.org; 
>> linux-arm-kernel at lists.infradead.org;
>> stable at vger.kernel.org; Don Brace <don.brace@microsemi.com>; James 
>> E.J.
>> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
>> <martin.petersen@oracle.com>; esc.storagedev
>> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
>> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
>> kernel at vger.kernel.org>
>> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
>> 
>> EXTERNAL EMAIL
>> 
>> 
>> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
>> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
>> > shutdown")' has been added to kernel to shutdown pending PCIe port
>> > service interrupts during reboot so that a newly started kexec kernel
>> > wouldn't observe pending interrupts.
>> >
>> > pcie_port_device_remove() is disabling the root port and switches by
>> > calling pci_disable_device() after all PCIe service drivers are shutdown.
>> >
>> > This has been found to cause crashes on HP DL360 Gen9 machines during
>> > reboot due to hpsa driver not clearing the bus master bit during the
>> > shutdown procedure by calling pci_disable_device().
>> >
>> > Drop the shutdown API and do an orderly clean up by using the remove.
>> >
>> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
>> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
>> > Cc: stable at vger.kernel.org
>> > Reported-by: Ryan Finnie <ryan@finnie.org>
>> 
>> Tested successfully on DL360 Gen9 and DL380 Gen9.
>> 
>> Tested-by: Ryan Finnie <ryan@finnie.org>
> 
> The shutdown path issues a cache flush to the controller.
> Without this flush, you will see "Dirty Cache" messages at POST.
> It is best to keep the shutdown path.
> 

I have seen that shutdown() is also called from remove().

remove() is supposed to do a safe cleanup too. If it is leaving the hw 
in inconsistent state even though it is c lling shutdown , it is yet 
another bug.

> Thanks,
> Don Brace
> ESC - Smart Storage
> Microsemi Corporation

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[okaya]

On 2018-05-30 15:25, Don Brace wrote:
>> -----Original Message-----
>> From: Ryan Finnie [mailto:ryan@finnie.org]
>> Sent: Tuesday, May 29, 2018 8:50 PM
>> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci@vger.kernel.org;
>> timur@codeaurora.org
>> Cc: linux-arm-msm@vger.kernel.org; 
>> linux-arm-kernel@lists.infradead.org;
>> stable@vger.kernel.org; Don Brace <don.brace@microsemi.com>; James 
>> E.J.
>> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen
>> <martin.petersen@oracle.com>; esc.storagedev
>> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY
>> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux-
>> kernel@vger.kernel.org>
>> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
>> 
>> EXTERNAL EMAIL
>> 
>> 
>> On 05/28/2018 02:21 PM, Sinan Kaya wrote:
>> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
>> > shutdown")' has been added to kernel to shutdown pending PCIe port
>> > service interrupts during reboot so that a newly started kexec kernel
>> > wouldn't observe pending interrupts.
>> >
>> > pcie_port_device_remove() is disabling the root port and switches by
>> > calling pci_disable_device() after all PCIe service drivers are shutdown.
>> >
>> > This has been found to cause crashes on HP DL360 Gen9 machines during
>> > reboot due to hpsa driver not clearing the bus master bit during the
>> > shutdown procedure by calling pci_disable_device().
>> >
>> > Drop the shutdown API and do an orderly clean up by using the remove.
>> >
>> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
>> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
>> > Cc: stable@vger.kernel.org
>> > Reported-by: Ryan Finnie <ryan@finnie.org>
>> 
>> Tested successfully on DL360 Gen9 and DL380 Gen9.
>> 
>> Tested-by: Ryan Finnie <ryan@finnie.org>
> 
> The shutdown path issues a cache flush to the controller.
> Without this flush, you will see "Dirty Cache" messages at POST.
> It is best to keep the shutdown path.
> 

I have seen that shutdown() is also called from remove().

remove() is supposed to do a safe cleanup too. If it is leaving the hw 
in inconsistent state even though it is c lling shutdown , it is yet 
another bug.

> Thanks,
> Don Brace
> ESC - Smart Storage
> Microsemi Corporation

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

On 5/30/2018 9:08 PM, okaya@codeaurora.org wrote:
> I have seen that shutdown() is also called from remove().
> 
> remove() is supposed to do a safe cleanup too. If it is leaving the hw in inconsistent state even though it is c lling shutdown , it is yet another bug.

Let's try to be constructive. I'll post a patch with the pci_disable added to shutdown
only as in my original proposal.

Somebody can deal with remove another day.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

On 5/30/2018 9:08 PM, okaya at codeaurora.org wrote:
> I have seen that shutdown() is also called from remove().
> 
> remove() is supposed to do a safe cleanup too. If it is leaving the hw in inconsistent state even though it is c lling shutdown , it is yet another bug.

Let's try to be constructive. I'll post a patch with the pci_disable added to shutdown
only as in my original proposal.

Somebody can deal with remove another day.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback

[Sinan Kaya]

On 5/30/2018 9:08 PM, okaya@codeaurora.org wrote:
> I have seen that shutdown() is also called from remove().
> 
> remove() is supposed to do a safe cleanup too. If it is leaving the hw in inconsistent state even though it is c lling shutdown , it is yet another bug.

Let's try to be constructive. I'll post a patch with the pci_disable added to shutdown
only as in my original proposal.

Somebody can deal with remove another day.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> It is up to a driver to implement shutdown() callback. If shutdown()
> callback is not implemented, PCI device can have pending interrupt and
> even do DMA transactions while the system is going down.
> 
> If kexec is in use, this can damage the newly booting kexec kernel
> or even prevent it from booting altogether. Fallback to calling the
> remove() callback if shutdown() isn't implemented for a given driver.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable@vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>

[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> It is up to a driver to implement shutdown() callback. If shutdown()
> callback is not implemented, PCI device can have pending interrupt and
> even do DMA transactions while the system is going down.
> 
> If kexec is in use, this can damage the newly booting kexec kernel
> or even prevent it from booting altogether. Fallback to calling the
> remove() callback if shutdown() isn't implemented for a given driver.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable at vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>

Re: [PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist

[Ryan Finnie]

On 05/28/2018 02:21 PM, Sinan Kaya wrote:
> It is up to a driver to implement shutdown() callback. If shutdown()
> callback is not implemented, PCI device can have pending interrupt and
> even do DMA transactions while the system is going down.
> 
> If kexec is in use, this can damage the newly booting kexec kernel
> or even prevent it from booting altogether. Fallback to calling the
> remove() callback if shutdown() isn't implemented for a given driver.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
> Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
> Cc: stable@vger.kernel.org
> Reported-by: Ryan Finnie <ryan@finnie.org>

Tested successfully on DL360 Gen9 and DL380 Gen9.

Tested-by: Ryan Finnie <ryan@finnie.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel