* [PATCH] configure: warn if not using a separate build directory @ 2020-03-31 10:37 Daniel P. Berrangé 2020-03-31 11:11 ` Philippe Mathieu-Daudé ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Daniel P. Berrangé @ 2020-03-31 10:37 UTC (permalink / raw) To: qemu-devel Cc: Kevin Wolf, Peter Maydell, Daniel P. Berrangé, Liviu Ionescu, Markus Armbruster, Stefan Hajnoczi, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic Running configure directly from the source directory is a build configuration that will go away in future. It is also not currently covered by any automated testing. Display a deprecation warning if the user attempts to use an in-srcdir build setup, so that they are aware that they're building QEMU in an undesirable manner. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> --- configure | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/configure b/configure index e225a1e3ff..1ab7492ab5 100755 --- a/configure +++ b/configure @@ -3,6 +3,19 @@ # qemu configure script (c) 2003 Fabrice Bellard # +BUILDDIR=$(pwd) +SRCDIR=$(dirname "$0") + +ABS_BUILDDIR=$(realpath $BUILDDIR) +ABS_SRCDIR=$(realpath $SRCDIR) + +in_srcdir=no +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] +then + in_srcdir=yes +fi + + # Unset some variables known to interfere with behavior of common tools, # just as autoconf does. CLICOLOR_FORCE= GREP_OPTIONS= @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then echo "us upstream at qemu-devel@nongnu.org." fi +if test "$in_srcdir" = "yes"; then + echo + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" + echo + echo "Support for running the 'configure' script directly from the" + echo "source directory is deprecated and will go away in a future" + echo "release. In source dir builds are not covered by automated" + echo "testing and are liable to break without warning. Users are" + echo "strongly recommended to switch to a separate build directory:" + echo + echo " $ mkdir build" + echo " $ cd build" + echo " $ ../configure" + echo " $ make" + echo +fi + config_host_mak="config-host.mak" echo "# Automatically generated by configure - do not modify" >config-all-disas.mak -- 2.24.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 10:37 [PATCH] configure: warn if not using a separate build directory Daniel P. Berrangé @ 2020-03-31 11:11 ` Philippe Mathieu-Daudé 2020-03-31 11:41 ` Daniel P. Berrangé 2020-03-31 14:44 ` Eric Blake 2020-04-01 3:03 ` Carlo Arenas 2 siblings, 1 reply; 9+ messages in thread From: Philippe Mathieu-Daudé @ 2020-03-31 11:11 UTC (permalink / raw) To: Daniel P. Berrangé, qemu-devel Cc: Kevin Wolf, Peter Maydell, Stefan Hajnoczi, Markus Armbruster, Liviu Ionescu, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic On 3/31/20 12:37 PM, Daniel P. Berrangé wrote: > Running configure directly from the source directory is a build > configuration that will go away in future. It is also not currently > covered by any automated testing. Display a deprecation warning if > the user attempts to use an in-srcdir build setup, so that they are > aware that they're building QEMU in an undesirable manner. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > configure | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/configure b/configure > index e225a1e3ff..1ab7492ab5 100755 > --- a/configure > +++ b/configure > @@ -3,6 +3,19 @@ > # qemu configure script (c) 2003 Fabrice Bellard > # > > +BUILDDIR=$(pwd) > +SRCDIR=$(dirname "$0") This duplicates $source_path. Maybe you can rename it $source_path and remove the $source_path assignment later. > + > +ABS_BUILDDIR=$(realpath $BUILDDIR) > +ABS_SRCDIR=$(realpath $SRCDIR) > + > +in_srcdir=no > +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] > +then > + in_srcdir=yes > +fi > + > + > # Unset some variables known to interfere with behavior of common tools, > # just as autoconf does. > CLICOLOR_FORCE= GREP_OPTIONS= > @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then > echo "us upstream at qemu-devel@nongnu.org." > fi > > +if test "$in_srcdir" = "yes"; then > + echo > + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" > + echo > + echo "Support for running the 'configure' script directly from the" > + echo "source directory is deprecated and will go away in a future" > + echo "release. In source dir builds are not covered by automated" > + echo "testing and are liable to break without warning. Users are" > + echo "strongly recommended to switch to a separate build directory:" > + echo > + echo " $ mkdir build" > + echo " $ cd build" > + echo " $ ../configure" > + echo " $ make" > + echo > +fi I'd move it at the very end of the file, to be the last thing displayed. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> > + > config_host_mak="config-host.mak" > > echo "# Automatically generated by configure - do not modify" >config-all-disas.mak > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 11:11 ` Philippe Mathieu-Daudé @ 2020-03-31 11:41 ` Daniel P. Berrangé 2020-03-31 12:56 ` Philippe Mathieu-Daudé 0 siblings, 1 reply; 9+ messages in thread From: Daniel P. Berrangé @ 2020-03-31 11:41 UTC (permalink / raw) To: Philippe Mathieu-Daudé Cc: Kevin Wolf, Peter Maydell, Stefan Hajnoczi, qemu-devel, Markus Armbruster, Liviu Ionescu, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic On Tue, Mar 31, 2020 at 01:11:45PM +0200, Philippe Mathieu-Daudé wrote: > On 3/31/20 12:37 PM, Daniel P. Berrangé wrote: > > Running configure directly from the source directory is a build > > configuration that will go away in future. It is also not currently > > covered by any automated testing. Display a deprecation warning if > > the user attempts to use an in-srcdir build setup, so that they are > > aware that they're building QEMU in an undesirable manner. > > > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > > --- > > configure | 30 ++++++++++++++++++++++++++++++ > > 1 file changed, 30 insertions(+) > > > > diff --git a/configure b/configure > > index e225a1e3ff..1ab7492ab5 100755 > > --- a/configure > > +++ b/configure > > @@ -3,6 +3,19 @@ > > # qemu configure script (c) 2003 Fabrice Bellard > > # > > +BUILDDIR=$(pwd) > > +SRCDIR=$(dirname "$0") > > This duplicates $source_path. > Maybe you can rename it $source_path and remove the $source_path assignment > later. Sure, could do that.. > > > + > > +ABS_BUILDDIR=$(realpath $BUILDDIR) > > +ABS_SRCDIR=$(realpath $SRCDIR) > > + > > +in_srcdir=no > > +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] > > +then > > + in_srcdir=yes > > +fi > > + > > + > > # Unset some variables known to interfere with behavior of common tools, > > # just as autoconf does. > > CLICOLOR_FORCE= GREP_OPTIONS= > > @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then > > echo "us upstream at qemu-devel@nongnu.org." > > fi > > +if test "$in_srcdir" = "yes"; then > > + echo > > + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" > > + echo > > + echo "Support for running the 'configure' script directly from the" > > + echo "source directory is deprecated and will go away in a future" > > + echo "release. In source dir builds are not covered by automated" > > + echo "testing and are liable to break without warning. Users are" > > + echo "strongly recommended to switch to a separate build directory:" > > + echo > > + echo " $ mkdir build" > > + echo " $ cd build" > > + echo " $ ../configure" > > + echo " $ make" > > + echo > > +fi > > I'd move it at the very end of the file, to be the last thing displayed. You can't see it from the diff, but immediately before here are a bunch of other big warnings for users, so I figured it was a good idea to keep them all together. > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> > > > + > > config_host_mak="config-host.mak" > > echo "# Automatically generated by configure - do not modify" >config-all-disas.mak > > > Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 11:41 ` Daniel P. Berrangé @ 2020-03-31 12:56 ` Philippe Mathieu-Daudé 0 siblings, 0 replies; 9+ messages in thread From: Philippe Mathieu-Daudé @ 2020-03-31 12:56 UTC (permalink / raw) To: Daniel P. Berrangé Cc: Kevin Wolf, Peter Maydell, Stefan Hajnoczi, qemu-devel, Markus Armbruster, Liviu Ionescu, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic On 3/31/20 1:41 PM, Daniel P. Berrangé wrote: > On Tue, Mar 31, 2020 at 01:11:45PM +0200, Philippe Mathieu-Daudé wrote: >> On 3/31/20 12:37 PM, Daniel P. Berrangé wrote: >>> Running configure directly from the source directory is a build >>> configuration that will go away in future. It is also not currently >>> covered by any automated testing. Display a deprecation warning if >>> the user attempts to use an in-srcdir build setup, so that they are >>> aware that they're building QEMU in an undesirable manner. >>> >>> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> >>> --- >>> configure | 30 ++++++++++++++++++++++++++++++ >>> 1 file changed, 30 insertions(+) >>> >>> diff --git a/configure b/configure >>> index e225a1e3ff..1ab7492ab5 100755 >>> --- a/configure >>> +++ b/configure >>> @@ -3,6 +3,19 @@ >>> # qemu configure script (c) 2003 Fabrice Bellard >>> # >>> +BUILDDIR=$(pwd) >>> +SRCDIR=$(dirname "$0") >> >> This duplicates $source_path. >> Maybe you can rename it $source_path and remove the $source_path assignment >> later. > > Sure, could do that.. > >> >>> + >>> +ABS_BUILDDIR=$(realpath $BUILDDIR) >>> +ABS_SRCDIR=$(realpath $SRCDIR) >>> + >>> +in_srcdir=no >>> +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] >>> +then >>> + in_srcdir=yes >>> +fi >>> + >>> + >>> # Unset some variables known to interfere with behavior of common tools, >>> # just as autoconf does. >>> CLICOLOR_FORCE= GREP_OPTIONS= >>> @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then >>> echo "us upstream at qemu-devel@nongnu.org." >>> fi >>> +if test "$in_srcdir" = "yes"; then >>> + echo >>> + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" >>> + echo >>> + echo "Support for running the 'configure' script directly from the" >>> + echo "source directory is deprecated and will go away in a future" >>> + echo "release. In source dir builds are not covered by automated" >>> + echo "testing and are liable to break without warning. Users are" >>> + echo "strongly recommended to switch to a separate build directory:" >>> + echo >>> + echo " $ mkdir build" >>> + echo " $ cd build" >>> + echo " $ ../configure" >>> + echo " $ make" >>> + echo >>> +fi >> >> I'd move it at the very end of the file, to be the last thing displayed. > > You can't see it from the diff, but immediately before here are a bunch > of other big warnings for users, so I figured it was a good idea to keep > them all together. IMO we should move them to the end too. I'm getting this output: $ ./configure [...] plugin support no fuzzing support no gdb /usr/bin/gdb WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED Support for running the 'configure' script directly from the source directory is deprecated and will go away in a future release. In source dir builds are not covered by automated testing and are liable to break without warning. Users are strongly recommended to switch to a separate build directory: $ mkdir build $ cd build $ ../configure $ make cross containers docker NOTE: guest cross-compilers enabled: cc cc $ We might also move the cross-x messages earlier. Anyway all my comments can be postponed to 5.1, so if other agree with your patch, let's KISS for 5.1-rc1. > >> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> >> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> >> >>> + >>> config_host_mak="config-host.mak" >>> echo "# Automatically generated by configure - do not modify" >config-all-disas.mak >>> >> > > Regards, > Daniel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 10:37 [PATCH] configure: warn if not using a separate build directory Daniel P. Berrangé 2020-03-31 11:11 ` Philippe Mathieu-Daudé @ 2020-03-31 14:44 ` Eric Blake 2020-03-31 14:56 ` Daniel P. Berrangé 2020-03-31 15:10 ` BALATON Zoltan 2020-04-01 3:03 ` Carlo Arenas 2 siblings, 2 replies; 9+ messages in thread From: Eric Blake @ 2020-03-31 14:44 UTC (permalink / raw) To: Daniel P. Berrangé, qemu-devel Cc: Kevin Wolf, Peter Maydell, Liviu Ionescu, Markus Armbruster, Stefan Hajnoczi, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic On 3/31/20 5:37 AM, Daniel P. Berrangé wrote: > Running configure directly from the source directory is a build > configuration that will go away in future. It is also not currently > covered by any automated testing. Display a deprecation warning if > the user attempts to use an in-srcdir build setup, so that they are > aware that they're building QEMU in an undesirable manner. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > configure | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > It sounds like you already have a v2 coming up to address Phillipe's comments, but I'd be happy to see this concept make it into v5.0. > diff --git a/configure b/configure > index e225a1e3ff..1ab7492ab5 100755 > --- a/configure > +++ b/configure > @@ -3,6 +3,19 @@ > # qemu configure script (c) 2003 Fabrice Bellard > # > > +BUILDDIR=$(pwd) Why fork out to 'pwd', when we can rely on $PWD for the same answer? Note that both $(pwd) and $PWD $BUILDDIR always give an absolute (but no necessarily canonical) path, which means... > +SRCDIR=$(dirname "$0") > + > +ABS_BUILDDIR=$(realpath $BUILDDIR) ...calling this ABS_BUILDDIR is a misnomer (it was already absolute). What it is really doing is chasing through symlinks to result in a canonical name, particularly since unless you have absolute names, using only string comparison to see if two filenames are equivalent will have false negatives (/tmp vs. /tmp/., for example). > +ABS_SRCDIR=$(realpath $SRCDIR) Not robust if there are spaces in the directory names. Safer would be ABS_BUILDDIR=$(realpath -- "$BUILDDIR") and similarly for ABS_SRCDIR. > + > +in_srcdir=no > +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] Bashism. You MUST spell this '=', not '==', since configure is run under /bin/sh which might be dash which does not understand ==. > +then > + in_srcdir=yes > +fi > + > + > # Unset some variables known to interfere with behavior of common tools, > # just as autoconf does. > CLICOLOR_FORCE= GREP_OPTIONS= > @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then > echo "us upstream at qemu-devel@nongnu.org." > fi > > +if test "$in_srcdir" = "yes"; then > + echo > + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" > + echo > + echo "Support for running the 'configure' script directly from the" > + echo "source directory is deprecated and will go away in a future" > + echo "release. In source dir builds are not covered by automated" > + echo "testing and are liable to break without warning. Users are" > + echo "strongly recommended to switch to a separate build directory:" > + echo > + echo " $ mkdir build" > + echo " $ cd build" > + echo " $ ../configure" > + echo " $ make" > + echo > +fi You know, it WOULD be possible to further enhance this to actually create 'build' as well as a shim GNUmakefile that would auto-forward on to building directly in build, so that you maintain the illusion of an in-place build (other than all the build artifacts now living in a different location), and muscle memory for in-tree 'make' still works; I've posted elsewhere and will repeat here the contents of my GNUmakefile: # Hack for redirecting while reminding myself to use distinct builddir ifeq ($(MAKECMDGOALS),) recurse: all endif %: force @echo 'changing directory to build...' @sleep 2 @$(MAKE) -C build -f Makefile $(MAKECMDGOALS) force: ; .PHONY: force GNUmakefile: ; But we could do that as a patch on top of yours. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 14:44 ` Eric Blake @ 2020-03-31 14:56 ` Daniel P. Berrangé 2020-03-31 15:51 ` Kevin Wolf 2020-03-31 15:10 ` BALATON Zoltan 1 sibling, 1 reply; 9+ messages in thread From: Daniel P. Berrangé @ 2020-03-31 14:56 UTC (permalink / raw) To: Eric Blake Cc: Kevin Wolf, Peter Maydell, Liviu Ionescu, qemu-devel, Markus Armbruster, Stefan Hajnoczi, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic On Tue, Mar 31, 2020 at 09:44:37AM -0500, Eric Blake wrote: > On 3/31/20 5:37 AM, Daniel P. Berrangé wrote: > > Running configure directly from the source directory is a build > > configuration that will go away in future. It is also not currently > > covered by any automated testing. Display a deprecation warning if > > the user attempts to use an in-srcdir build setup, so that they are > > aware that they're building QEMU in an undesirable manner. > > > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > > --- > > configure | 30 ++++++++++++++++++++++++++++++ > > 1 file changed, 30 insertions(+) > > > > It sounds like you already have a v2 coming up to address Phillipe's > comments, but I'd be happy to see this concept make it into v5.0. > > > diff --git a/configure b/configure > > index e225a1e3ff..1ab7492ab5 100755 > > --- a/configure > > +++ b/configure > > @@ -3,6 +3,19 @@ > > # qemu configure script (c) 2003 Fabrice Bellard > > # > > +BUILDDIR=$(pwd) > > Why fork out to 'pwd', when we can rely on $PWD for the same answer? Note > that both $(pwd) and $PWD $BUILDDIR always give an absolute (but no > necessarily canonical) path, which means... > > > +SRCDIR=$(dirname "$0") > > + > > +ABS_BUILDDIR=$(realpath $BUILDDIR) > > ...calling this ABS_BUILDDIR is a misnomer (it was already absolute). What > it is really doing is chasing through symlinks to result in a canonical > name, particularly since unless you have absolute names, using only string > comparison to see if two filenames are equivalent will have false negatives > (/tmp vs. /tmp/., for example). > > > +ABS_SRCDIR=$(realpath $SRCDIR) > > Not robust if there are spaces in the directory names. Safer would be > ABS_BUILDDIR=$(realpath -- "$BUILDDIR") > and similarly for ABS_SRCDIR. > > > + > > +in_srcdir=no > > +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] > > Bashism. You MUST spell this '=', not '==', since configure is run under > /bin/sh which might be dash which does not understand ==. Ok, will address all of the above. > > @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then > > echo "us upstream at qemu-devel@nongnu.org." > > fi > > +if test "$in_srcdir" = "yes"; then > > + echo > > + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" > > + echo > > + echo "Support for running the 'configure' script directly from the" > > + echo "source directory is deprecated and will go away in a future" > > + echo "release. In source dir builds are not covered by automated" > > + echo "testing and are liable to break without warning. Users are" > > + echo "strongly recommended to switch to a separate build directory:" > > + echo > > + echo " $ mkdir build" > > + echo " $ cd build" > > + echo " $ ../configure" > > + echo " $ make" > > + echo > > +fi > > You know, it WOULD be possible to further enhance this to actually create > 'build' as well as a shim GNUmakefile that would auto-forward on to building > directly in build, so that you maintain the illusion of an in-place build > (other than all the build artifacts now living in a different location), and > muscle memory for in-tree 'make' still works; I've posted elsewhere and will > repeat here the contents of my GNUmakefile: I wanted to focus strictly on the part that we have agreement on, namely the deprecation. Any functional changes should be completely separate to avoid holding up the merge of the warning message patch. Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 14:56 ` Daniel P. Berrangé @ 2020-03-31 15:51 ` Kevin Wolf 0 siblings, 0 replies; 9+ messages in thread From: Kevin Wolf @ 2020-03-31 15:51 UTC (permalink / raw) To: Daniel P. Berrangé Cc: Peter Maydell, Stefan Hajnoczi, qemu-devel, Markus Armbruster, Liviu Ionescu, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic Am 31.03.2020 um 16:56 hat Daniel P. Berrangé geschrieben: > On Tue, Mar 31, 2020 at 09:44:37AM -0500, Eric Blake wrote: > > On 3/31/20 5:37 AM, Daniel P. Berrangé wrote: > > > Running configure directly from the source directory is a build > > > configuration that will go away in future. It is also not currently > > > covered by any automated testing. Display a deprecation warning if > > > the user attempts to use an in-srcdir build setup, so that they are > > > aware that they're building QEMU in an undesirable manner. > > > > > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > > > @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then > > > echo "us upstream at qemu-devel@nongnu.org." > > > fi > > > +if test "$in_srcdir" = "yes"; then > > > + echo > > > + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" > > > + echo > > > + echo "Support for running the 'configure' script directly from the" > > > + echo "source directory is deprecated and will go away in a future" > > > + echo "release. In source dir builds are not covered by automated" > > > + echo "testing and are liable to break without warning. Users are" > > > + echo "strongly recommended to switch to a separate build directory:" > > > + echo > > > + echo " $ mkdir build" > > > + echo " $ cd build" > > > + echo " $ ../configure" > > > + echo " $ make" > > > + echo > > > +fi > > > > You know, it WOULD be possible to further enhance this to actually create > > 'build' as well as a shim GNUmakefile that would auto-forward on to building > > directly in build, so that you maintain the illusion of an in-place build > > (other than all the build artifacts now living in a different location), and > > muscle memory for in-tree 'make' still works; I've posted elsewhere and will > > repeat here the contents of my GNUmakefile: > > I wanted to focus strictly on the part that we have agreement on, namely > the deprecation. Any functional changes should be completely separate > to avoid holding up the merge of the warning message patch. We don't have agreement on the type of deprecation suggested by your message, that is, that ./configure from the source directory will stop working. If we can agree on using Eric's approach, then the message should rather tell users that the resulting binaries will move to a different place in future versions. Kevin ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 14:44 ` Eric Blake 2020-03-31 14:56 ` Daniel P. Berrangé @ 2020-03-31 15:10 ` BALATON Zoltan 1 sibling, 0 replies; 9+ messages in thread From: BALATON Zoltan @ 2020-03-31 15:10 UTC (permalink / raw) To: Eric Blake Cc: Kevin Wolf, Peter Maydell, Daniel P. Berrangé, Liviu Ionescu, qemu-devel, Markus Armbruster, Stefan Hajnoczi, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic [-- Attachment #1: Type: text/plain, Size: 4117 bytes --] On Tue, 31 Mar 2020, Eric Blake wrote: > On 3/31/20 5:37 AM, Daniel P. Berrangé wrote: >> Running configure directly from the source directory is a build >> configuration that will go away in future. It is also not currently >> covered by any automated testing. Display a deprecation warning if >> the user attempts to use an in-srcdir build setup, so that they are >> aware that they're building QEMU in an undesirable manner. >> >> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> >> --- >> configure | 30 ++++++++++++++++++++++++++++++ >> 1 file changed, 30 insertions(+) >> > > It sounds like you already have a v2 coming up to address Phillipe's > comments, but I'd be happy to see this concept make it into v5.0. > >> diff --git a/configure b/configure >> index e225a1e3ff..1ab7492ab5 100755 >> --- a/configure >> +++ b/configure >> @@ -3,6 +3,19 @@ >> # qemu configure script (c) 2003 Fabrice Bellard >> # >> +BUILDDIR=$(pwd) > > Why fork out to 'pwd', when we can rely on $PWD for the same answer? Note > that both $(pwd) and $PWD $BUILDDIR always give an absolute (but no > necessarily canonical) path, which means... > >> +SRCDIR=$(dirname "$0") >> + >> +ABS_BUILDDIR=$(realpath $BUILDDIR) > > ...calling this ABS_BUILDDIR is a misnomer (it was already absolute). What it > is really doing is chasing through symlinks to result in a canonical name, > particularly since unless you have absolute names, using only string > comparison to see if two filenames are equivalent will have false negatives > (/tmp vs. /tmp/., for example). > >> +ABS_SRCDIR=$(realpath $SRCDIR) > > Not robust if there are spaces in the directory names. Safer would be > ABS_BUILDDIR=$(realpath -- "$BUILDDIR") > and similarly for ABS_SRCDIR. > >> + >> +in_srcdir=no >> +if [ "$ABS_SRCDIR" == "$ABS_BUILDDIR" ] > > Bashism. You MUST spell this '=', not '==', since configure is run under > /bin/sh which might be dash which does not understand ==. > >> +then >> + in_srcdir=yes >> +fi >> + >> + >> # Unset some variables known to interfere with behavior of common tools, >> # just as autoconf does. >> CLICOLOR_FORCE= GREP_OPTIONS= >> @@ -6799,6 +6812,23 @@ if test "$supported_os" = "no"; then >> echo "us upstream at qemu-devel@nongnu.org." >> fi >> +if test "$in_srcdir" = "yes"; then >> + echo >> + echo "WARNING: SUPPORT FOR IN SOURCE DIR BUILDS IS DEPRECATED" >> + echo >> + echo "Support for running the 'configure' script directly from the" >> + echo "source directory is deprecated and will go away in a future" >> + echo "release. In source dir builds are not covered by automated" >> + echo "testing and are liable to break without warning. Users are" >> + echo "strongly recommended to switch to a separate build directory:" >> + echo >> + echo " $ mkdir build" >> + echo " $ cd build" >> + echo " $ ../configure" >> + echo " $ make" >> + echo >> +fi > > You know, it WOULD be possible to further enhance this to actually create > 'build' as well as a shim GNUmakefile that would auto-forward on to building > directly in build, so that you maintain the illusion of an in-place build > (other than all the build artifacts now living in a different location), and > muscle memory for in-tree 'make' still works; I've posted elsewhere and will > repeat here the contents of my GNUmakefile: > > # Hack for redirecting while reminding myself to use distinct builddir > ifeq ($(MAKECMDGOALS),) > recurse: all > endif > %: force > @echo 'changing directory to build...' > @sleep 2 Right, just drop all the 14 line warning above, this one line here should be enough to remind people (maybe reworded to say that build results are found there and move it after the $(MAKE) so it's printed last and drop the sleep 2 and this should work. Regards, BALATON Zoltan > @$(MAKE) -C build -f Makefile $(MAKECMDGOALS) > force: ; > .PHONY: force > GNUmakefile: ; > > > But we could do that as a patch on top of yours. > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] configure: warn if not using a separate build directory 2020-03-31 10:37 [PATCH] configure: warn if not using a separate build directory Daniel P. Berrangé 2020-03-31 11:11 ` Philippe Mathieu-Daudé 2020-03-31 14:44 ` Eric Blake @ 2020-04-01 3:03 ` Carlo Arenas 2 siblings, 0 replies; 9+ messages in thread From: Carlo Arenas @ 2020-04-01 3:03 UTC (permalink / raw) To: Daniel P. Berrangé Cc: Kevin Wolf, Peter Maydell, Stefan Hajnoczi, qemu-devel, Markus Armbruster, Liviu Ionescu, Paolo Bonzini, Michal Suchánek, Aleksandar Markovic [-- Attachment #1: Type: text/plain, Size: 266 bytes --] On Tue, Mar 31, 2020 at 3:38 AM Daniel P. Berrangé <berrange@redhat.com> wrote: > Running configure directly from the source directory is a build > configuration that will go away in future. It is also not currently > s/in future/in the future/g Carlo [-- Attachment #2: Type: text/html, Size: 562 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-04-01 3:05 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-03-31 10:37 [PATCH] configure: warn if not using a separate build directory Daniel P. Berrangé 2020-03-31 11:11 ` Philippe Mathieu-Daudé 2020-03-31 11:41 ` Daniel P. Berrangé 2020-03-31 12:56 ` Philippe Mathieu-Daudé 2020-03-31 14:44 ` Eric Blake 2020-03-31 14:56 ` Daniel P. Berrangé 2020-03-31 15:51 ` Kevin Wolf 2020-03-31 15:10 ` BALATON Zoltan 2020-04-01 3:03 ` Carlo Arenas
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.