* SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-13 0:29 Alex Chiang
2010-01-13 14:59 ` Christoph Lameter
` (2 more replies)
0 siblings, 3 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-13 0:29 UTC (permalink / raw)
To: cl, penberg; +Cc: linux-ia64, linux-mm
[-- Attachment #1: Type: text/plain, Size: 53437 bytes --]
Hello Christoph,
My HP rx8640 (ia64, 16 CPUs) is experiencing a bad paging request
during boot.
I've bisected it down to this commit:
756dee75872a2a764b478e18076360b8a4ec9045 is the first bad commit
commit 756dee75872a2a764b478e18076360b8a4ec9045
Author: Christoph Lameter <cl@linux-foundation.org>
Date: Fri Dec 18 16:26:21 2009 -0600
SLUB: Get rid of dynamic DMA kmalloc cache allocation
Dynamic DMA kmalloc cache allocation is troublesome since the
new percpu allocator does not support allocations in atomic contexts.
Reserve some statically allocated kmalloc_cpu structures instead.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Below is the crash log. Will attach my .config.
Thanks,
/ac
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc1-00002-g756dee7 (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #12 SMP Tue Jan 12 16:35:35 MST 2010
EFI v2.00 by HP: SALsystab=0x707fd39c088 ACPI 2.0=0x707fd7d0000 HCDP=0x707fd7f6998 SMBIOS=0x1ffec000
booting generic kernel on platform hpzx1
PCDP: v3 at 0x707fd7f6998
Early serial console at MMIO 0xffc30064000 (options '9600n8')
bootconsole [uart8250] enabled
ACPI: RSDP 00000707fd7d0000 00024 (v02 HP)
ACPI: XSDT 00000707fd7f6a80 0007C (v01 HP rx8640 00000000 HP 00000000)
ACPI: FACP 00000707fd7f65b0 000F4 (v03 HP rx8640 00000000 HP 00000000)
ACPI Warning: 32/64X length mismatch in Pm1aEventBlock: 32/16 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: Invalid length for Pm1aEventBlock: 16, using default 32 (20091214/tbfadt-607)
ACPI: DSDT 00000707fd7d03d0 2618B (v02 HP CELL000 00000000 HP 00000000)
ACPI: FACS 00000707fd7d0028 00040
ACPI: SPCR 00000707fd7d0068 00050 (v01 HP rx8640 00000000 HP 00000000)
ACPI: DBGP 00000707fd7d00b8 00034 (v01 HP rx8640 00000000 HP 00000000)
ACPI: APIC 00000707fd7d01a0 0022C (v01 HP rx8640 00000000 HP 00000000)
ACPI: SLIT 00000707fd7f66a8 00045 (v01 HP rx8640 00000000 HP 00000000)
ACPI: CPEP 00000707fd7f66f0 000AC (v01 HP rx8640 00000000 HP 00000000)
ACPI: SRAT 00000707fd7f67a0 001F8 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SPMI 00000707fd7f6560 00050 (v04 HP rx8640 00000000 HP 00000000)
ACPI: OEMD 00000707fd7d0128 00074 (v01 HP rx8640 00000000 HP 00000000)
ACPI: HPET 00000707fd7d00f0 00038 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SSDT 00000707fd7f6b78 25088 (v02 HP CELL001 00000000 HP 00000000)
ACPI: Local APIC address c0000000fee00000
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c7000 (6055123 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc1-00002-g756dee7 root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66832128k/66893888k available (7953k code, 127936k reserved, 10820k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
Console: colour dummy device 80x25
Calibrating delay loop... 3194.88 BogoMIPS (lpj=6389760)
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Mount-cache hash table entries: 4096
ACPI: Core revision 20091214
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 141 cycles)
CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 146 cycles)
CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 3: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 146 cycles)
CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 4: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 336 cycles)
CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 5: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 337 cycles)
CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 8: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 648 cycles)
CPU 8: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 9: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 649 cycles)
CPU 9: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 10: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 656 cycles)
CPU 10: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 652 cycles)
CPU 11: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 12: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 655 cycles)
CPU 12: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 13: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 655 cycles)
CPU 13: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 14: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 657 cycles)
CPU 14: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 657 cycles)
CPU 15: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
Brought up 16 CPUs
Total of 16 processors activated (51118.08 BogoMIPS).
DMI 2.5 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOSAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [L000] (0000:00)
pci_root HWP0002:00: host bridge window [io 0x0000-0x0fff]
pci_root HWP0002:00: host bridge window [mem 0xf0000000000-0xf007edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0000:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0000:00:01.0: PME# supported from D3hot
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0000:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0000:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0000:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0000:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0000:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0000:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0000:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0000:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0000:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0000:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0000:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0000:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0000:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0000:1c)
pci_root HWP0002:01: host bridge window [io 0x1000-0x1fff]
pci_root HWP0002:01: host bridge window [mem 0xf0080000000-0xf00fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:1c:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:1c:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:1c:01.0: reg 20: [io 0x1000-0x103f]
pci 0000:1c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:1c:01.0: PME# supported from D0 D3hot
pci 0000:1c:01.0: PME# disabled
pci 0000:1c:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:1c:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:1c:01.1: reg 20: [io 0x1040-0x107f]
pci 0000:1c:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0000:1c:01.1: PME# supported from D0 D3hot
pci 0000:1c:01.1: PME# disabled
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0000:38)
pci_root HWP0002:02: host bridge window [io 0x2000-0x3fff]
pci_root HWP0002:02: host bridge window [mem 0xf1000000000-0xf107edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:38:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:38:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:38:01.0: reg 20: [io 0x2000-0x203f]
pci 0000:38:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:38:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:38:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:38:01.1: reg 20: [io 0x2040-0x207f]
pci 0000:38:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0000:54)
pci_root HWP0002:03: host bridge window [io 0x4000-0x5fff]
pci_root HWP0002:03: host bridge window [mem 0xf2000000000-0xf207edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0000:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0000:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0000:70)
pci_root HWP0002:04: host bridge window [io 0x6000-0x7fff]
pci_root HWP0002:04: host bridge window [mem 0xf3000000000-0xf307edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0000:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0000:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0000:8c)
pci_root HWP0002:05: host bridge window [io 0x8000-0x9fff]
pci_root HWP0002:05: host bridge window [mem 0xf4000000000-0xf407edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:8d:01.0: reg 14: [mem 0x84132000-0x84132fff 64bit]
pci 0000:8d:01.0: reg 20: [mem 0x84133000-0x84133fff 64bit]
pci 0000:8d:01.1: reg 14: [mem 0x84134000-0x84134fff 64bit]
pci 0000:8d:01.1: reg 1c: [mem 0x84000000-0x840fffff 64bit pref]
pci 0000:8d:02.0: reg 10: [mem 0x84130000-0x84130fff]
pci 0000:8d:02.0: supports D1 D2
pci 0000:8d:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.0: PME# disabled
pci 0000:8d:02.1: reg 10: [mem 0x84131000-0x84131fff]
pci 0000:8d:02.1: supports D1 D2
pci 0000:8d:02.1: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.1: PME# disabled
pci 0000:8d:02.2: reg 10: [mem 0x84135000-0x841350ff]
pci 0000:8d:02.2: supports D1 D2
pci 0000:8d:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.2: PME# disabled
pci 0000:8d:03.0: reg 10: [mem 0x80000000-0x83ffffff pref]
pci 0000:8d:03.0: reg 14: [io 0x8000-0x80ff]
pci 0000:8d:03.0: reg 18: [mem 0x84120000-0x8412ffff]
pci 0000:8d:03.0: reg 30: [mem 0x84100000-0x8411ffff pref]
pci 0000:8d:03.0: supports D1 D2
pci 0000:8c:01.0: PCI bridge to [bus 8d-8d]
pci 0000:8c:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:8c:01.0: bridge window [mem 0x80000000-0x841fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0000:a9)
pci_root HWP0002:06: host bridge window [io 0xa000-0xbfff]
pci_root HWP0002:06: host bridge window [mem 0xf5000000000-0xf507edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0000:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0000:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0000:c6)
pci_root HWP0002:07: host bridge window [io 0xc000-0xdfff]
pci_root HWP0002:07: host bridge window [mem 0xf6000000000-0xf607edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0000:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0000:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0000:e3)
pci_root HWP0002:08: host bridge window [io 0xe000-0xffff]
pci_root HWP0002:08: host bridge window [mem 0xf7000000000-0xf707edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0000:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0000:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L014._PRT]
ACPI: PCI Root Bridge [L000] (0001:00)
pci_root HWP0002:09: host bridge window [io 0x1000000-0x1000fff] (PCI address [0x0-0xfff])
pci_root HWP0002:09: host bridge window [mem 0xf0100000000-0xf017edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0001:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0001:00:01.0: PME# supported from D3hot
pci 0001:00:01.0: PME# disabled
pci 0001:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0001:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0001:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0001:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0001:00:02.0: supports D1 D2
pci 0001:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0001:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0001:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0001:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0001:00:02.1: supports D1 D2
pci 0001:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0001:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0001:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0001:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0001:00:03.0: supports D1 D2
pci 0001:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0001:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0001:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0001:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0001:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0001:1c)
pci_root HWP0002:0a: host bridge window [io 0x1001000-0x1001fff] (PCI address [0x1000-0x1fff])
pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:1d:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:1d:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:1d:04.0: reg 20: [io 0x1000-0x103f]
pci 0001:1d:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:1d:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:1d:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:1d:04.1: reg 20: [io 0x1040-0x107f]
pci 0001:1d:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:1d:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:1d:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:1d:06.0: reg 20: [io 0x1080-0x10bf]
pci 0001:1d:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:1d:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:1d:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:1d:06.1: reg 20: [io 0x10c0-0x10ff]
pci 0001:1d:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:1c:01.0: PCI bridge to [bus 1d-1d]
pci 0001:1c:01.0: bridge window [io 0x1000-0x1fff]
pci 0001:1c:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0001:38)
pci_root HWP0002:0b: host bridge window [io 0x1002000-0x1003fff] (PCI address [0x2000-0x3fff])
pci_root HWP0002:0b: host bridge window [mem 0xf1100000000-0xf117edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:39:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:39:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:39:04.0: reg 20: [io 0x2000-0x203f]
pci 0001:39:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:39:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:39:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:39:04.1: reg 20: [io 0x2040-0x207f]
pci 0001:39:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:39:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:39:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:39:06.0: reg 20: [io 0x2080-0x20bf]
pci 0001:39:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:39:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:39:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:39:06.1: reg 20: [io 0x20c0-0x20ff]
pci 0001:39:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:38:01.0: PCI bridge to [bus 39-39]
pci 0001:38:01.0: bridge window [io 0x2000-0x2fff]
pci 0001:38:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0001:54)
pci_root HWP0002:0c: host bridge window [io 0x1004000-0x1005fff] (PCI address [0x4000-0x5fff])
pci_root HWP0002:0c: host bridge window [mem 0xf2100000000-0xf217edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0001:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0001:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0001:70)
pci_root HWP0002:0d: host bridge window [io 0x1006000-0x1007fff] (PCI address [0x6000-0x7fff])
pci_root HWP0002:0d: host bridge window [mem 0xf3100000000-0xf317edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0001:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0001:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0001:8c)
pci_root HWP0002:0e: host bridge window [io 0x1008000-0x1009fff] (PCI address [0x8000-0x9fff])
pci_root HWP0002:0e: host bridge window [mem 0xf4100000000-0xf417edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:8c:01.0: reg 10: [mem 0x80080000-0x8009ffff 64bit]
pci 0001:8c:01.0: reg 18: [mem 0x80040000-0x8007ffff 64bit]
pci 0001:8c:01.0: reg 20: [io 0x8000-0x803f]
pci 0001:8c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:8c:01.1: reg 10: [mem 0x800a0000-0x800bffff 64bit]
pci 0001:8c:01.1: reg 20: [io 0x8040-0x807f]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0001:a9)
pci_root HWP0002:0f: host bridge window [io 0x100a000-0x100bfff] (PCI address [0xa000-0xbfff])
pci_root HWP0002:0f: host bridge window [mem 0xf5100000000-0xf517edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0001:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0001:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0001:c6)
pci_root HWP0002:10: host bridge window [io 0x100c000-0x100dfff] (PCI address [0xc000-0xdfff])
pci_root HWP0002:10: host bridge window [mem 0xf6100000000-0xf617edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0001:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0001:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0001:e3)
pci_root HWP0002:11: host bridge window [io 0x100e000-0x100ffff] (PCI address [0xe000-0xffff])
pci_root HWP0002:11: host bridge window [mem 0xf7100000000-0xf717edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0001:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0001:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L014._PRT]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
Switching to clocksource itc
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Please use IA-32 EL for executing IA-32 binaries
HugeTLB registered 256 MB page size, pre-allocated 0 pages
msgmni has been set to 32768
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 36 (level, low) -> CPU 2 (0x0400) vector 58
e1000 0000:1c:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 58
e1000: 0000:1c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:76
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 37 (level, low) -> CPU 3 (0x0500) vector 59
e1000 0000:1c:01.1: PCI INT B -> GSI 37 (level, low) -> IRQ 59
e1000: 0000:1c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:77
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 47 (level, low) -> CPU 4 (0x0800) vector 60
e1000 0000:38:01.0: PCI INT A -> GSI 47 (level, low) -> IRQ 60
e1000: 0000:38:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:28
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 48 (level, low) -> CPU 5 (0x0900) vector 61
e1000 0000:38:01.1: PCI INT B -> GSI 48 (level, low) -> IRQ 61
e1000: 0000:38:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:29
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 58 (level, low) -> CPU 6 (0x0c00) vector 62
e1000 0000:54:01.0: PCI INT A -> GSI 58 (level, low) -> IRQ 62
e1000: 0000:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:44
e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 59 (level, low) -> CPU 7 (0x0d00) vector 63
e1000 0000:54:01.1: PCI INT B -> GSI 59 (level, low) -> IRQ 63
e1000: 0000:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:45
e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 69 (level, low) -> CPU 0 (0x0000) vector 64
e1000 0000:70:01.0: PCI INT A -> GSI 69 (level, low) -> IRQ 64
e1000: 0000:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1a
e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 70 (level, low) -> CPU 1 (0x0100) vector 65
e1000 0000:70:01.1: PCI INT B -> GSI 70 (level, low) -> IRQ 65
e1000: 0000:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1b
e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 91 (level, low) -> CPU 2 (0x0400) vector 66
e1000 0000:a9:01.0: PCI INT A -> GSI 91 (level, low) -> IRQ 66
e1000: 0000:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d6
e1000: eth8: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 92 (level, low) -> CPU 3 (0x0500) vector 67
e1000 0000:a9:01.1: PCI INT B -> GSI 92 (level, low) -> IRQ 67
e1000: 0000:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d7
e1000: eth9: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 102 (level, low) -> CPU 4 (0x0800) vector 68
e1000 0000:c6:01.0: PCI INT A -> GSI 102 (level, low) -> IRQ 68
e1000: 0000:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c2
e1000: eth10: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 103 (level, low) -> CPU 5 (0x0900) vector 69
e1000 0000:c6:01.1: PCI INT B -> GSI 103 (level, low) -> IRQ 69
e1000: 0000:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c3
e1000: eth11: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 113 (level, low) -> CPU 6 (0x0c00) vector 70
e1000 0000:e3:01.0: PCI INT A -> GSI 113 (level, low) -> IRQ 70
e1000: 0000:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c6
e1000: eth12: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 114 (level, low) -> CPU 7 (0x0d00) vector 71
e1000 0000:e3:01.1: PCI INT B -> GSI 114 (level, low) -> IRQ 71
e1000: 0000:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c7
e1000: eth13: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 144 (level, low) -> CPU 8 (0x0001) vector 72
e1000 0001:1d:04.0: PCI INT A -> GSI 144 (level, low) -> IRQ 72
e1000: 0001:1d:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:90
e1000: eth14: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 145 (level, low) -> CPU 9 (0x0101) vector 73
e1000 0001:1d:04.1: PCI INT B -> GSI 145 (level, low) -> IRQ 73
e1000: 0001:1d:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:91
e1000: eth15: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 146 (level, low) -> CPU 10 (0x0401) vector 74
e1000 0001:1d:06.0: PCI INT A -> GSI 146 (level, low) -> IRQ 74
e1000: 0001:1d:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:92
e1000: eth16: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 147 (level, low) -> CPU 11 (0x0501) vector 75
e1000 0001:1d:06.1: PCI INT B -> GSI 147 (level, low) -> IRQ 75
e1000: 0001:1d:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:93
e1000: eth17: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 155 (level, low) -> CPU 12 (0x0801) vector 76
e1000 0001:39:04.0: PCI INT A -> GSI 155 (level, low) -> IRQ 76
e1000: 0001:39:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:00
e1000: eth18: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 156 (level, low) -> CPU 13 (0x0901) vector 77
e1000 0001:39:04.1: PCI INT B -> GSI 156 (level, low) -> IRQ 77
e1000: 0001:39:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:01
e1000: eth19: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 157 (level, low) -> CPU 14 (0x0c01) vector 78
e1000 0001:39:06.0: PCI INT A -> GSI 157 (level, low) -> IRQ 78
e1000: 0001:39:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:02
e1000: eth20: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 158 (level, low) -> CPU 15 (0x0d01) vector 79
e1000 0001:39:06.1: PCI INT B -> GSI 158 (level, low) -> IRQ 79
e1000: 0001:39:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:03
e1000: eth21: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 166 (level, low) -> CPU 8 (0x0001) vector 80
e1000 0001:54:01.0: PCI INT A -> GSI 166 (level, low) -> IRQ 80
e1000: 0001:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:30
e1000: eth22: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 167 (level, low) -> CPU 9 (0x0101) vector 81
e1000 0001:54:01.1: PCI INT B -> GSI 167 (level, low) -> IRQ 81
e1000: 0001:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:31
e1000: eth23: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 177 (level, low) -> CPU 10 (0x0401) vector 82
e1000 0001:70:01.0: PCI INT A -> GSI 177 (level, low) -> IRQ 82
e1000: 0001:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2c
e1000: eth24: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 178 (level, low) -> CPU 11 (0x0501) vector 83
e1000 0001:70:01.1: PCI INT B -> GSI 178 (level, low) -> IRQ 83
e1000: 0001:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2d
e1000: eth25: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 188 (level, low) -> CPU 12 (0x0801) vector 84
e1000 0001:8c:01.0: PCI INT A -> GSI 188 (level, low) -> IRQ 84
e1000: 0001:8c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7e
e1000: eth26: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 189 (level, low) -> CPU 13 (0x0901) vector 85
e1000 0001:8c:01.1: PCI INT B -> GSI 189 (level, low) -> IRQ 85
e1000: 0001:8c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7f
e1000: eth27: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 199 (level, low) -> CPU 14 (0x0c01) vector 86
e1000 0001:a9:01.0: PCI INT A -> GSI 199 (level, low) -> IRQ 86
e1000: 0001:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:58
e1000: eth28: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 200 (level, low) -> CPU 15 (0x0d01) vector 87
e1000 0001:a9:01.1: PCI INT B -> GSI 200 (level, low) -> IRQ 87
e1000: 0001:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:59
e1000: eth29: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 210 (level, low) -> CPU 8 (0x0001) vector 88
e1000 0001:c6:01.0: PCI INT A -> GSI 210 (level, low) -> IRQ 88
e1000: 0001:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:78
e1000: eth30: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 211 (level, low) -> CPU 9 (0x0101) vector 89
e1000 0001:c6:01.1: PCI INT B -> GSI 211 (level, low) -> IRQ 89
e1000: 0001:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:79
e1000: eth31: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 221 (level, low) -> CPU 10 (0x0401) vector 90
e1000 0001:e3:01.0: PCI INT A -> GSI 221 (level, low) -> IRQ 90
e1000: 0001:e3:01.0: e1000_check_options: Warning: no configuration for board #32
e1000: 0001:e3:01.0: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:00
e1000: eth32: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 222 (level, low) -> CPU 11 (0x0501) vector 91
e1000 0001:e3:01.1: PCI INT B -> GSI 222 (level, low) -> IRQ 91
e1000: 0001:e3:01.1: e1000_check_options: Warning: no configuration for board #33
e1000: 0001:e3:01.1: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:01
e1000: eth33: e1000_probe: Intel(R) PRO/1000 Network Connection
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
tg3.c:v3.105 (December 2, 2009)
GSI 29 (level, low) -> CPU 4 (0x0800) vector 92
tg3 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 92
eth34: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:b6:7b
eth34: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth34: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth34: dma_rwctrl[769c0000] dma_mask[64-bit]
GSI 137 (level, low) -> CPU 13 (0x0901) vector 93
tg3 0001:00:01.0: PCI INT A -> GSI 137 (level, low) -> IRQ 93
eth35: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:36:5f
eth35: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth35: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth35: dma_rwctrl[769c0000] dma_mask[64-bit]
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=94
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=95
sda: sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
mptspi 0000:00:03.0: PCI INT A -> GSI 27 (level, low) -> IRQ 96
mptbase: ioc2: Initiating bringup
ioc2: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi2 : ioc2: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=96
scsi 2:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target2:0:6: Beginning Domain Validation
target2:0:6: Ending Domain Validation
target2:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 2:0:6:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 2:0:6:0: [sdb] Write Protect is off
sd 2:0:6:0: [sdb] Mode Sense: d3 00 10 08
sd 2:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
GSI 28 (level, low) -> CPU 1 (0x0100) vector 97
mptspi 0000:00:03.1: PCI INT B -> GSI 28 (level, low) -> IRQ 97
mptbase: ioc3: Initiating bringup
ioc3: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi3 : ioc3: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=97
sdb: sdb1 sdb2
sd 2:0:6:0: [sdb] Attached SCSI disk
GSI 133 (level, low) -> CPU 10 (0x0401) vector 98
mptspi 0001:00:02.0: PCI INT A -> GSI 133 (level, low) -> IRQ 98
mptbase: ioc4: Initiating bringup
ioc4: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi4 : ioc4: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=98
scsi 4:0:6:0: Direct-Access HP 73.4G ST373454LC HPC2 PQ: 0 ANSI: 3
target4:0:6: Beginning Domain Validation
target4:0:6: Ending Domain Validation
target4:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 4:0:6:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:6:0: [sdc] Write Protect is off
sd 4:0:6:0: [sdc] Mode Sense: d3 00 10 08
sd 4:0:6:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
GSI 134 (level, low) -> CPU 11 (0x0501) vector 99
mptspi 0001:00:02.1: PCI INT B -> GSI 134 (level, low) -> IRQ 99
sdc:
mptbase: ioc5: Initiating bringup
ioc5: LSI53C1030 C0: Capabilities={Initiator,Target}
sdc1 sdc2
scsi5 : ioc5: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=99
sd 4:0:6:0: [sdc] Attached SCSI disk
scsi 5:0:2:0: CD-ROM _NEC DVD+RW ND-2100AD 1.28 PQ: 0 ANSI: 2
target5:0:2: Beginning Domain Validation
target5:0:2: Domain Validation skipping write tests
target5:0:2: Ending Domain Validation
target5:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 135 (level, low) -> CPU 12 (0x0801) vector 100
mptspi 0001:00:03.0: PCI INT A -> GSI 135 (level, low) -> IRQ 100
mptbase: ioc6: Initiating bringup
ioc6: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi6 : ioc6: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=100
scsi 6:0:6:0: Direct-Access HP 73.4G ST373454LC HPC3 PQ: 0 ANSI: 3
target6:0:6: Beginning Domain Validation
target6:0:6: Ending Domain Validation
target6:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 6:0:6:0: [sdd] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 6:0:6:0: [sdd] Write Protect is off
sd 6:0:6:0: [sdd] Mode Sense: d3 00 10 08
sd 6:0:6:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
GSI 136 (level, low) -> CPU 13 (0x0901) vector 101
mptspi 0001:00:03.1: PCI INT B -> GSI 136 (level, low) -> IRQ 101
sdd:
mptbase: ioc7: Initiating bringup
ioc7: LSI53C1030 C0: Capabilities={Initiator,Target}
sdd1 sdd2
scsi7 : ioc7: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=101
sd 6:0:6:0: [sdd] Attached SCSI disk
Fusion MPT SAS Host driver 3.04.13
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
udev: renamed network interface eth18 to eth20
udev: renamed network interface eth19 to eth21
udev: renamed network interface eth12 to eth13
udev: renamed network interface eth17 to eth19
udev: renamed network interface eth11 to eth12
udev: renamed network interface eth16 to eth18
udev: renamed network interface eth14 to eth16
udev: renamed network interface eth25 to eth27
udev: renamed network interface eth22 to eth24
udev: renamed network interface eth34 to eth0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
GSI 80 (level, low) -> CPU 6 (0x0c00) vector 102
ehci_hcd 0000:8d:02.2: PCI INT C -> GSI 80 (level, low) -> IRQ 102
ehci_hcd 0000:8d:02.2: EHCI Host Controller
ehci_hcd 0000:8d:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:8d:02.2: irq 102, io mem 0xf4004135000
udev: renamed network interface eth6 to eth7
ehci_hcd 0000:8d:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
GSI 82 (level, low) -> CPU 7 (0x0d00) vector 103
ohci_hcd 0000:8d:02.0: PCI INT A -> GSI 82 (level, low) -> IRQ 103
ohci_hcd 0000:8d:02.0: OHCI Host Controller
ohci_hcd 0000:8d:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:8d:02.0: irq 103, io mem 0xf4004130000
udev: renamed network interface eth35 to eth15
udev: renamed network interface eth28 to eth30
udev: renamed network interface eth32 to eth34
udev: renamed network interface eth5 to eth6
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 83 (level, low) -> CPU 0 (0x0000) vector 104
ohci_hcd 0000:8d:02.1: PCI INT B -> GSI 83 (level, low) -> IRQ 104
ohci_hcd 0000:8d:02.1: OHCI Host Controller
ohci_hcd 0000:8d:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:8d:02.1: irq 104, io mem 0xf4004131000
udev: renamed network interface eth9 to eth10
udev: renamed network interface eth1_rename to eth2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
udev: renamed network interface eth23_rename to eth25
udev: renamed network interface eth10_rename to eth11
udev: renamed network interface eth13_rename to eth14
udev: renamed network interface eth20_rename to eth22
udev: renamed network interface eth0_rename to eth1
udev: renamed network interface eth21_rename to eth23
udev: renamed network interface eth15_rename to eth17
udev: renamed network interface eth27_rename to eth29
udev: renamed network interface eth8_rename to eth9
udev: renamed network interface eth24_rename to eth26
udev: renamed network interface eth30_rename to eth32
udev: renamed network interface eth4_rename to eth5
udev: renamed network interface eth26_rename to eth28
udev: renamed network interface eth33_rename to eth35
udev: renamed network interface eth7_rename to eth8
udev: renamed network interface eth3_rename to eth4
udev: renamed network interface eth2_rename to eth3
udev: renamed network interface eth29_rename to eth31
udev: renamed network interface eth31_rename to eth33
usb 2-1: new full speed USB device using ohci_hcd and address 2
preping 05-blogd.sh
running 05-blogd.sh
Boot logging started on /dev/ttyS0(/dev/console) at Tue Jan 12 23:45:20 2010
preping 11-block.sh
running 11-block.sh
preping 11-usb.sh
running 11-usb.sh
preping 21-devinit_done.sh
running 21-devinit_done.sh
preping 81-mount.sh
running 81-mount.sh
Waiting for device /dev/disk/by-id/scsi-35001d38000048bd8-part2 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/scsi-35001d38000048bd8-part2
input: HP Virtual Management Device as /class/input/input0
generic-usb 0003:03F0:1126.0001: input: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:8d:02.0-1/input0
input: HP Virtual Management Device as /class/input/input1
generic-usb 0003:03F0:1126.0002: input: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:8d:02.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
/dev/disk/by-id/scsi-35001d38000048bd8-part2: clean, 206457/4448256 files, 3090212/17789968 blocks
kjournald starting. Commit interval 5 seconds
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Unable to handle kernel paging request at virtual address a07ffffe5a783870
modprobe[6776]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg button container usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6776, CPU 5, comm: modprobe
psr : 0000101008026018 ifs : 8000000000000b1d ip : [<a0000001001a7c60>] Not tainted (2.6.33-rc1-00002-g756dee7)
ip is at kmem_cache_open+0x420/0xca0
unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
rnat: a000000101255d28 bsps: a000000207dd6768 pr : aa99aaa6aa566659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001a7980 b6 : a0000001003571c0 b7 : a000000100088f60
f6 : 0fff5fffffffff0000000 f7 : 0ffeb8000000000000000
f8 : 1000f8000000000000000 f9 : 100088000000000000000
f10 : 10005fffffffff0000000 f11 : 1003e0000000000000080
r1 : a0000001014385f0 r2 : 0000000000010007 r3 : 0000000000080800
r8 : 0000000000000001 r9 : a0000001010275f8 r10 : 0000000000000000
r11 : a000000101256178 r12 : e00007860955fdf0 r13 : e000078609550000
r14 : 0000000000000009 r15 : a000000101027668 r16 : 0000000040004000
r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
r20 : a000000101027658 r21 : 00000000000003ff r22 : 0000000000003fff
r23 : 0000000000003fff r24 : 00000000000017ff r25 : 0000000000002fff
r26 : a000000101027604 r27 : a000000101027600 r28 : a0000001010296e8
r29 : a000000101027610 r30 : 0000000000000080 r31 : 0000000000000080
Call Trace:
[<a000000100016970>] show_stack+0x50/0xa0
sp=e00007860955f9c0 bsp=e0000786095514b8
[<a0000001000171e0>] show_regs+0x820/0x860
sp=e00007860955fb90 bsp=e000078609551460
[<a00000010003bc60>] die+0x1a0/0x300
sp=e00007860955fb90 bsp=e000078609551420
[<a000000100068b40>] ia64_do_page_fault+0x8c0/0x9e0
sp=e00007860955fb90 bsp=e0000786095513c8
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e00007860955fc20 bsp=e0000786095513c8
[<a0000001001a7c60>] kmem_cache_open+0x420/0xca0
sp=e00007860955fdf0 bsp=e0000786095512e0
[<a0000001001a8cf0>] dma_kmalloc_cache+0x2d0/0x440
sp=e00007860955fdf0 bsp=e000078609551290
[<a0000001001a8f70>] get_slab+0x110/0x1a0
sp=e00007860955fdf0 bsp=e000078609551268
[<a0000001001a96e0>] __kmalloc+0xa0/0x240
sp=e00007860955fdf0 bsp=e000078609551230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp=e00007860955fdf0 bsp=e0000786095511c8
[<a000000100479240>] driver_probe_device+0x180/0x300
sp=e00007860955fe20 bsp=e000078609551190
[<a0000001004794a0>] __driver_attach+0xe0/0x140
sp=e00007860955fe20 bsp=e000078609551160
[<a000000100477ea0>] bus_for_each_dev+0xa0/0x140
sp=e00007860955fe20 bsp=e000078609551128
[<a000000100478e60>] driver_attach+0x40/0x60
sp=e00007860955fe30 bsp=e000078609551108
[<a000000100476cc0>] bus_add_driver+0x180/0x520
sp=e00007860955fe30 bsp=e0000786095510c0
[<a000000100479c60>] driver_register+0x260/0x400
sp=e00007860955fe30 bsp=e000078609551078
[<a0000001004cdd00>] scsi_register_driver+0x40/0x60
sp=e00007860955fe30 bsp=e000078609551058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e00007860955fe30 bsp=e000078609551038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e00007860955fe30 bsp=e000078609550ff0
[<a000000100104080>] sys_init_module+0x1e0/0x4c0
sp=e00007860955fe30 bsp=e000078609550f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e00007860955fe30 bsp=e000078609550f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e000078609560000 bsp=e000078609550f78
Disabling lock debugging due to kernel taint
udevd-event[6618]: '/sbin/modprobe' abnormal exit
[-- Attachment #2: config-ia64 --]
[-- Type: text/plain, Size: 47113 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc1
# Tue Jan 12 15:47:09 2010
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_API=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-13 0:29 SLUB ia64 linux-next crash bisected to 756dee75 Alex Chiang
@ 2010-01-13 14:59 ` Christoph Lameter
2010-01-14 15:18 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-13 14:59 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1321 bytes --]
On Tue, 12 Jan 2010, Alex Chiang wrote:
> My HP rx8640 (ia64, 16 CPUs) is experiencing a bad paging request
> during boot.
Hmmm... Thats with 64k page size?
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
Huh? What wrong with node 2?
> [<a0000001001a7c60>] kmem_cache_open+0x420/0xca0
> sp=e00007860955fdf0 bsp=e0000786095512e0
> [<a0000001001a8cf0>] dma_kmalloc_cache+0x2d0/0x440
> sp=e00007860955fdf0 bsp=e000078609551290
Maybe we miscalculated the number of DMA caches needed.
Does this patch fix it?
---
include/linux/slub_def.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6/include/linux/slub_def.h
===================================================================
--- linux-2.6.orig/include/linux/slub_def.h 2010-01-13 08:50:43.000000000 -0600
+++ linux-2.6/include/linux/slub_def.h 2010-01-13 08:50:50.000000000 -0600
@@ -134,7 +134,7 @@ struct kmem_cache {
#ifdef CONFIG_ZONE_DMA
#define SLUB_DMA __GFP_DMA
/* Reserve extra caches for potential DMA use */
-#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT - 6)
+#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT)
#else
/* Disable DMA functionality */
#define SLUB_DMA (__force gfp_t)0
[-- Attachment #2: Type: TEXT/PLAIN, Size: 49000 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc1
# Tue Jan 12 15:47:09 2010
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_API=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-13 14:59 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-13 14:59 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1321 bytes --]
On Tue, 12 Jan 2010, Alex Chiang wrote:
> My HP rx8640 (ia64, 16 CPUs) is experiencing a bad paging request
> during boot.
Hmmm... Thats with 64k page size?
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
Huh? What wrong with node 2?
> [<a0000001001a7c60>] kmem_cache_open+0x420/0xca0
> sp=e00007860955fdf0 bsp=e0000786095512e0
> [<a0000001001a8cf0>] dma_kmalloc_cache+0x2d0/0x440
> sp=e00007860955fdf0 bsp=e000078609551290
Maybe we miscalculated the number of DMA caches needed.
Does this patch fix it?
---
include/linux/slub_def.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6/include/linux/slub_def.h
===================================================================
--- linux-2.6.orig/include/linux/slub_def.h 2010-01-13 08:50:43.000000000 -0600
+++ linux-2.6/include/linux/slub_def.h 2010-01-13 08:50:50.000000000 -0600
@@ -134,7 +134,7 @@ struct kmem_cache {
#ifdef CONFIG_ZONE_DMA
#define SLUB_DMA __GFP_DMA
/* Reserve extra caches for potential DMA use */
-#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT - 6)
+#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT)
#else
/* Disable DMA functionality */
#define SLUB_DMA (__force gfp_t)0
[-- Attachment #2: Type: TEXT/PLAIN, Size: 49000 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc1
# Tue Jan 12 15:47:09 2010
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_API=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-13 14:59 ` Christoph Lameter
@ 2010-01-14 0:53 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 0:53 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Tue, 12 Jan 2010, Alex Chiang wrote:
>
> > My HP rx8640 (ia64, 16 CPUs) is experiencing a bad paging request
> > during boot.
>
> Hmmm... Thats with 64k page size?
Yes.
CONFIG_IA64_PAGE_SIZE_64KB=y
> > SLUB: Unable to allocate memory from node 2
> > SLUB: Allocating a useless per node structure in order to be able to continue
>
> Huh? What wrong with node 2?
I've seen that message for quite some time now.
Here's some info from the EFI shell.
Shell> dimmconfig
MEMORY INFORMATION
Cab/ Total Active Failed SW Deconf HW Deconf
Cell Slot Mem Mem DIMMs DIMMs DIMMs Unknown
---- ----- --------- --------- ------ --------- --------- -------
0 0/0 32768 MB 32768 MB 0 0 0 0
1 0/1 32768 MB 32768 MB 0 0 0 0
Active Memory : 65536 MB
Interleaved Memory : 512 MB
NonInterleaved Memory : 65024 MB
Installed Memory : 65536 MB
Firmware puts each cell into a NUMA node, so we should really
only have 2 nodes, but for some reason, that 3rd node gets
created too. I haven't inspected the SRAT/SLIT on this machine
recently, but can do so if you want me to.
> > [<a0000001001a7c60>] kmem_cache_open+0x420/0xca0
> > sp=e00007860955fdf0 bsp=e0000786095512e0
> > [<a0000001001a8cf0>] dma_kmalloc_cache+0x2d0/0x440
> > sp=e00007860955fdf0 bsp=e000078609551290
>
> Maybe we miscalculated the number of DMA caches needed.
>
> Does this patch fix it?
Nope, same oops.
Hm... from the boot log
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
...
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
So the kernel doesn't like the SLIT; does it go off and create
its own NUMA nodes then?
/ac
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 0:53 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 0:53 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Tue, 12 Jan 2010, Alex Chiang wrote:
>
> > My HP rx8640 (ia64, 16 CPUs) is experiencing a bad paging request
> > during boot.
>
> Hmmm... Thats with 64k page size?
Yes.
CONFIG_IA64_PAGE_SIZE_64KB=y
> > SLUB: Unable to allocate memory from node 2
> > SLUB: Allocating a useless per node structure in order to be able to continue
>
> Huh? What wrong with node 2?
I've seen that message for quite some time now.
Here's some info from the EFI shell.
Shell> dimmconfig
MEMORY INFORMATION
Cab/ Total Active Failed SW Deconf HW Deconf
Cell Slot Mem Mem DIMMs DIMMs DIMMs Unknown
---- ----- --------- --------- ------ --------- --------- -------
0 0/0 32768 MB 32768 MB 0 0 0 0
1 0/1 32768 MB 32768 MB 0 0 0 0
Active Memory : 65536 MB
Interleaved Memory : 512 MB
NonInterleaved Memory : 65024 MB
Installed Memory : 65536 MB
Firmware puts each cell into a NUMA node, so we should really
only have 2 nodes, but for some reason, that 3rd node gets
created too. I haven't inspected the SRAT/SLIT on this machine
recently, but can do so if you want me to.
> > [<a0000001001a7c60>] kmem_cache_open+0x420/0xca0
> > spà0007860955fdf0 bspà000786095512e0
> > [<a0000001001a8cf0>] dma_kmalloc_cache+0x2d0/0x440
> > spà0007860955fdf0 bspà00078609551290
>
> Maybe we miscalculated the number of DMA caches needed.
>
> Does this patch fix it?
Nope, same oops.
Hm... from the boot log
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
...
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
So the kernel doesn't like the SLIT; does it go off and create
its own NUMA nodes then?
/ac
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 0:53 ` Alex Chiang
@ 2010-01-14 15:01 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 15:01 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
On Wed, 13 Jan 2010, Alex Chiang wrote:
> Firmware puts each cell into a NUMA node, so we should really
> only have 2 nodes, but for some reason, that 3rd node gets
> created too. I haven't inspected the SRAT/SLIT on this machine
> recently, but can do so if you want me to.
May not have anything to do with the problem we are looking at but memory
setup is screwed up. Funky effects may follow.
> > Maybe we miscalculated the number of DMA caches needed.
> > Does this patch fix it?
>
> Nope, same oops.
Duh. Have to look at this in more detail.
> ACPI: SLIT table looks invalid. Not used.
> Number of logical nodes in system = 3
> Number of memory chunks in system = 5
SLIT table just contain the distances if I remember correctly. The memory
maps are separate.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 15:01 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 15:01 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
On Wed, 13 Jan 2010, Alex Chiang wrote:
> Firmware puts each cell into a NUMA node, so we should really
> only have 2 nodes, but for some reason, that 3rd node gets
> created too. I haven't inspected the SRAT/SLIT on this machine
> recently, but can do so if you want me to.
May not have anything to do with the problem we are looking at but memory
setup is screwed up. Funky effects may follow.
> > Maybe we miscalculated the number of DMA caches needed.
> > Does this patch fix it?
>
> Nope, same oops.
Duh. Have to look at this in more detail.
> ACPI: SLIT table looks invalid. Not used.
> Number of logical nodes in system = 3
> Number of memory chunks in system = 5
SLIT table just contain the distances if I remember correctly. The memory
maps are separate.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-13 0:29 SLUB ia64 linux-next crash bisected to 756dee75 Alex Chiang
@ 2010-01-14 15:18 ` Christoph Lameter
2010-01-14 15:18 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 15:18 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
Try this
Subject: [SLUB] Size kmalloc_percpu correctly
We need kmalloc_percpu for all kmalloc caches not just for each shift
value.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-14 09:16:12.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-14 09:16:27.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 15:18 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 15:18 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
Try this
Subject: [SLUB] Size kmalloc_percpu correctly
We need kmalloc_percpu for all kmalloc caches not just for each shift
value.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
=================================--- linux-2.6.orig/mm/slub.c 2010-01-14 09:16:12.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-14 09:16:27.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 15:01 ` Christoph Lameter
@ 2010-01-14 18:01 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 18:01 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Wed, 13 Jan 2010, Alex Chiang wrote:
>
> > Firmware puts each cell into a NUMA node, so we should really
> > only have 2 nodes, but for some reason, that 3rd node gets
> > created too. I haven't inspected the SRAT/SLIT on this machine
> > recently, but can do so if you want me to.
>
> May not have anything to do with the problem we are looking at but memory
> setup is screwed up. Funky effects may follow.
Actually, I was reminded off-list by my HP colleagues that the
memory setup I showed you is common on mid-range and high-end HP
ia64 platforms.
Lee tells me:
The third node is the "interleaved memory" pseudo-node.
The firmware always interleaves 512MB of phys address
space across the nodes. On these platforms, only
interleaved memory is at phys addr 0--needed by firmware,
... All the real NUMA nodes' memory starts at some high
phys addr. So, even in "numa mode" [a.k.a. 100% cell
local memory], the firmware must create a region of
interleaved memory at phys 0. So, we get N+1 nodes.
Because node 2 is at phys 0 and contains only 512MB, it
is all ZONE_DMA memory. DMA zone is 1st 4G on ia64.
Our platforms have been shipping like this for years, so it's not
like anything recent has changed.
Thanks,
/ac
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 18:01 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 18:01 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Wed, 13 Jan 2010, Alex Chiang wrote:
>
> > Firmware puts each cell into a NUMA node, so we should really
> > only have 2 nodes, but for some reason, that 3rd node gets
> > created too. I haven't inspected the SRAT/SLIT on this machine
> > recently, but can do so if you want me to.
>
> May not have anything to do with the problem we are looking at but memory
> setup is screwed up. Funky effects may follow.
Actually, I was reminded off-list by my HP colleagues that the
memory setup I showed you is common on mid-range and high-end HP
ia64 platforms.
Lee tells me:
The third node is the "interleaved memory" pseudo-node.
The firmware always interleaves 512MB of phys address
space across the nodes. On these platforms, only
interleaved memory is at phys addr 0--needed by firmware,
... All the real NUMA nodes' memory starts at some high
phys addr. So, even in "numa mode" [a.k.a. 100% cell
local memory], the firmware must create a region of
interleaved memory at phys 0. So, we get N+1 nodes.
Because node 2 is at phys 0 and contains only 512MB, it
is all ZONE_DMA memory. DMA zone is 1st 4G on ia64.
Our platforms have been shipping like this for years, so it's not
like anything recent has changed.
Thanks,
/ac
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 15:18 ` Christoph Lameter
@ 2010-01-14 18:22 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 18:22 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
>
Sorry, still crashes.
/ac
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6234]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6234, CPU 14, comm: modprobe
psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb20
unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa566659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001a99c0 b6 : a00000010035db20 b7 : a000000100087640
f6 : 0fff5fffffffff0000000 f7 : 0ffeb8000000000000000
f8 : 1000f8000000000000000 f9 : 100088000000000000000
f10 : 10005fffffffff0000000 f11 : 1003e0000000000000080
r1 : a000000101447ff0 r2 : 0000000000010007 r3 : 0000000000080800
r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
r11 : a000000101265d58 r12 : e000078627dffdf0 r13 : e000078627df0000
r14 : 0000000000000009 r15 : a000000101037668 r16 : 0000000040004000
r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
r23 : 0000000000003fff r24 : 00000000000017ff r25 : 0000000000002fff
r26 : a000000101037604 r27 : a000000101037600 r28 : a0000001010396e8
r29 : a000000101037610 r30 : 0000000000000080 r31 : 0000000000000080
Call Trace:
[<a000000100016970>] show_stack+0x50/0xa0
sp=e000078627dff9c0 bsp=e000078627df14b8
[<a0000001000171e0>] show_regs+0x820/0x860
sp=e000078627dffb90 bsp=e000078627df1460
[<a00000010003bc60>] die+0x1a0/0x300
sp=e000078627dffb90 bsp=e000078627df1420
[<a0000001000688c0>] ia64_do_page_fault+0x8c0/0x9e0
sp=e000078627dffb90 bsp=e000078627df13c8
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e000078627dffc20 bsp=e000078627df13c8
[<a0000001001a9ca0>] kmem_cache_open+0x420/0xb20
sp=e000078627dffdf0 bsp=e000078627df12e0
[<a0000001001aabb0>] dma_kmalloc_cache+0x2d0/0x440
sp=e000078627dffdf0 bsp=e000078627df1290
[<a0000001001aae30>] get_slab+0x110/0x1a0
sp=e000078627dffdf0 bsp=e000078627df1268
[<a0000001001ab600>] __kmalloc+0xa0/0x260
sp=e000078627dffdf0 bsp=e000078627df1230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp=e000078627dffdf0 bsp=e000078627df11c8
[<a000000100481720>] driver_probe_device+0x180/0x300
sp=e000078627dffe20 bsp=e000078627df1190
[<a000000100481980>] __driver_attach+0xe0/0x140
sp=e000078627dffe20 bsp=e000078627df1160
[<a000000100480380>] bus_for_each_dev+0xa0/0x140
sp=e000078627dffe20 bsp=e000078627df1128
[<a000000100481340>] driver_attach+0x40/0x60
sp=e000078627dffe30 bsp=e000078627df1108
[<a00000010047f1a0>] bus_add_driver+0x180/0x520
sp=e000078627dffe30 bsp=e000078627df10c0
[<a000000100482140>] driver_register+0x260/0x400
sp=e000078627dffe30 bsp=e000078627df1078
[<a0000001004d5f40>] scsi_register_driver+0x40/0x60
sp=e000078627dffe30 bsp=e000078627df1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e000078627dffe30 bsp=e000078627df1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e000078627dffe30 bsp=e000078627df0ff0
[<a000000100105ec0>] sys_init_module+0x1e0/0x4c0
sp=e000078627dffe30 bsp=e000078627df0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e000078627dffe30 bsp=e000078627df0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e000078627e00000 bsp=e000078627df0f78
Disabling lock debugging due to kernel taint
udevd-event[6232]: '/sbin/modprobe' abnormal exit
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 18:22 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 18:22 UTC (permalink / raw)
To: Christoph Lameter; +Cc: penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
>
Sorry, still crashes.
/ac
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6234]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6234, CPU 14, comm: modprobe
psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb20
unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa566659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001a99c0 b6 : a00000010035db20 b7 : a000000100087640
f6 : 0fff5fffffffff0000000 f7 : 0ffeb8000000000000000
f8 : 1000f8000000000000000 f9 : 100088000000000000000
f10 : 10005fffffffff0000000 f11 : 1003e0000000000000080
r1 : a000000101447ff0 r2 : 0000000000010007 r3 : 0000000000080800
r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
r11 : a000000101265d58 r12 : e000078627dffdf0 r13 : e000078627df0000
r14 : 0000000000000009 r15 : a000000101037668 r16 : 0000000040004000
r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
r23 : 0000000000003fff r24 : 00000000000017ff r25 : 0000000000002fff
r26 : a000000101037604 r27 : a000000101037600 r28 : a0000001010396e8
r29 : a000000101037610 r30 : 0000000000000080 r31 : 0000000000000080
Call Trace:
[<a000000100016970>] show_stack+0x50/0xa0
spà00078627dff9c0 bspà00078627df14b8
[<a0000001000171e0>] show_regs+0x820/0x860
spà00078627dffb90 bspà00078627df1460
[<a00000010003bc60>] die+0x1a0/0x300
spà00078627dffb90 bspà00078627df1420
[<a0000001000688c0>] ia64_do_page_fault+0x8c0/0x9e0
spà00078627dffb90 bspà00078627df13c8
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
spà00078627dffc20 bspà00078627df13c8
[<a0000001001a9ca0>] kmem_cache_open+0x420/0xb20
spà00078627dffdf0 bspà00078627df12e0
[<a0000001001aabb0>] dma_kmalloc_cache+0x2d0/0x440
spà00078627dffdf0 bspà00078627df1290
[<a0000001001aae30>] get_slab+0x110/0x1a0
spà00078627dffdf0 bspà00078627df1268
[<a0000001001ab600>] __kmalloc+0xa0/0x260
spà00078627dffdf0 bspà00078627df1230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
spà00078627dffdf0 bspà00078627df11c8
[<a000000100481720>] driver_probe_device+0x180/0x300
spà00078627dffe20 bspà00078627df1190
[<a000000100481980>] __driver_attach+0xe0/0x140
spà00078627dffe20 bspà00078627df1160
[<a000000100480380>] bus_for_each_dev+0xa0/0x140
spà00078627dffe20 bspà00078627df1128
[<a000000100481340>] driver_attach+0x40/0x60
spà00078627dffe30 bspà00078627df1108
[<a00000010047f1a0>] bus_add_driver+0x180/0x520
spà00078627dffe30 bspà00078627df10c0
[<a000000100482140>] driver_register+0x260/0x400
spà00078627dffe30 bspà00078627df1078
[<a0000001004d5f40>] scsi_register_driver+0x40/0x60
spà00078627dffe30 bspà00078627df1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
spà00078627dffe30 bspà00078627df1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
spà00078627dffe30 bspà00078627df0ff0
[<a000000100105ec0>] sys_init_module+0x1e0/0x4c0
spà00078627dffe30 bspà00078627df0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
spà00078627dffe30 bspà00078627df0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
spà00078627e00000 bspà00078627df0f78
Disabling lock debugging due to kernel taint
udevd-event[6232]: '/sbin/modprobe' abnormal exit
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 18:22 ` Alex Chiang
@ 2010-01-14 19:17 ` Pekka Enberg
-1 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-14 19:17 UTC (permalink / raw)
To: Alex Chiang; +Cc: Christoph Lameter, linux-ia64, linux-mm
Hi Alex,
On Thu, Jan 14, 2010 at 8:22 PM, Alex Chiang <achiang@hp.com> wrote:
> * Christoph Lameter <cl@linux-foundation.org>:
>> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
>> #endif
>> }
>>
>> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
>> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>>
>> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
>> {
>>
>
> Sorry, still crashes.
>
> /ac
>
> INIT: version 2.86 booting
> System Boot Control: Running /etc/init.d/boot
> Mounting procfs at /proc done
> Mounting sysfs at /sys done
> Remounting tmpfs at /dev done
> Initializing /dev done
> Mounting devpts at /dev/pts done
> Starting udevd: udevd version 128 started
> done
> Loading drivers, configuring devices: input: Power Button as /class/input/input2
> ACPI: Power Button [PWRB]
> input: Sleep Button as /class/input/input3
> ACPI: Sleep Button [SLPF]
> sd 0:0:6:0: Attached scsi generic sg0 type 0
> scsi 1:0:2:0: Attached scsi generic sg1 type 5
> sd 2:0:6:0: Attached scsi generic sg2 type 0
> sd 4:0:6:0: Attached scsi generic sg3 type 0
> scsi 5:0:2:0: Attached scsi generic sg4 type 5
> sd 6:0:6:0: Attached scsi generic sg5 type 0
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
> modprobe[6234]: Oops 8813272891392 [1]
> Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
>
> Pid: 6234, CPU 14, comm: modprobe
> psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> ip is at kmem_cache_open+0x420/0xb20
I don't speak ia-64 so I'm having difficulties figuring out where
exactly it's crashing. Can you use addr2line or similar tool to show
us the exact location of the oops?
> unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
> rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa566659
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> csd : 0000000000000000 ssd : 0000000000000000
> b0 : a0000001001a99c0 b6 : a00000010035db20 b7 : a000000100087640
> f6 : 0fff5fffffffff0000000 f7 : 0ffeb8000000000000000
> f8 : 1000f8000000000000000 f9 : 100088000000000000000
> f10 : 10005fffffffff0000000 f11 : 1003e0000000000000080
> r1 : a000000101447ff0 r2 : 0000000000010007 r3 : 0000000000080800
> r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
> r11 : a000000101265d58 r12 : e000078627dffdf0 r13 : e000078627df0000
> r14 : 0000000000000009 r15 : a000000101037668 r16 : 0000000040004000
> r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
> r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
> r23 : 0000000000003fff r24 : 00000000000017ff r25 : 0000000000002fff
> r26 : a000000101037604 r27 : a000000101037600 r28 : a0000001010396e8
> r29 : a000000101037610 r30 : 0000000000000080 r31 : 0000000000000080
>
> Call Trace:
> [<a000000100016970>] show_stack+0x50/0xa0
> sp=e000078627dff9c0 bsp=e000078627df14b8
> [<a0000001000171e0>] show_regs+0x820/0x860
> sp=e000078627dffb90 bsp=e000078627df1460
> [<a00000010003bc60>] die+0x1a0/0x300
> sp=e000078627dffb90 bsp=e000078627df1420
> [<a0000001000688c0>] ia64_do_page_fault+0x8c0/0x9e0
> sp=e000078627dffb90 bsp=e000078627df13c8
> [<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
> sp=e000078627dffc20 bsp=e000078627df13c8
> [<a0000001001a9ca0>] kmem_cache_open+0x420/0xb20
> sp=e000078627dffdf0 bsp=e000078627df12e0
> [<a0000001001aabb0>] dma_kmalloc_cache+0x2d0/0x440
> sp=e000078627dffdf0 bsp=e000078627df1290
> [<a0000001001aae30>] get_slab+0x110/0x1a0
> sp=e000078627dffdf0 bsp=e000078627df1268
> [<a0000001001ab600>] __kmalloc+0xa0/0x260
> sp=e000078627dffdf0 bsp=e000078627df1230
> [<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
> sp=e000078627dffdf0 bsp=e000078627df11c8
> [<a000000100481720>] driver_probe_device+0x180/0x300
> sp=e000078627dffe20 bsp=e000078627df1190
> [<a000000100481980>] __driver_attach+0xe0/0x140
> sp=e000078627dffe20 bsp=e000078627df1160
> [<a000000100480380>] bus_for_each_dev+0xa0/0x140
> sp=e000078627dffe20 bsp=e000078627df1128
> [<a000000100481340>] driver_attach+0x40/0x60
> sp=e000078627dffe30 bsp=e000078627df1108
> [<a00000010047f1a0>] bus_add_driver+0x180/0x520
> sp=e000078627dffe30 bsp=e000078627df10c0
> [<a000000100482140>] driver_register+0x260/0x400
> sp=e000078627dffe30 bsp=e000078627df1078
> [<a0000001004d5f40>] scsi_register_driver+0x40/0x60
> sp=e000078627dffe30 bsp=e000078627df1058
> [<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
> sp=e000078627dffe30 bsp=e000078627df1038
> [<a00000010000a960>] do_one_initcall+0xe0/0x360
> sp=e000078627dffe30 bsp=e000078627df0ff0
> [<a000000100105ec0>] sys_init_module+0x1e0/0x4c0
> sp=e000078627dffe30 bsp=e000078627df0f78
> [<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
> sp=e000078627dffe30 bsp=e000078627df0f78
> [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
> sp=e000078627e00000 bsp=e000078627df0f78
> Disabling lock debugging due to kernel taint
> udevd-event[6232]: '/sbin/modprobe' abnormal exit
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 19:17 ` Pekka Enberg
0 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-14 19:17 UTC (permalink / raw)
To: Alex Chiang; +Cc: Christoph Lameter, linux-ia64, linux-mm
Hi Alex,
On Thu, Jan 14, 2010 at 8:22 PM, Alex Chiang <achiang@hp.com> wrote:
> * Christoph Lameter <cl@linux-foundation.org>:
>> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
>> #endif
>> }
>>
>> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
>> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>>
>> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
>> {
>>
>
> Sorry, still crashes.
>
> /ac
>
> INIT: version 2.86 booting
> System Boot Control: Running /etc/init.d/boot
> Mounting procfs at /proc done
> Mounting sysfs at /sys done
> Remounting tmpfs at /dev done
> Initializing /dev done
> Mounting devpts at /dev/pts done
> Starting udevd: udevd version 128 started
> done
> Loading drivers, configuring devices: input: Power Button as /class/input/input2
> ACPI: Power Button [PWRB]
> input: Sleep Button as /class/input/input3
> ACPI: Sleep Button [SLPF]
> sd 0:0:6:0: Attached scsi generic sg0 type 0
> scsi 1:0:2:0: Attached scsi generic sg1 type 5
> sd 2:0:6:0: Attached scsi generic sg2 type 0
> sd 4:0:6:0: Attached scsi generic sg3 type 0
> scsi 5:0:2:0: Attached scsi generic sg4 type 5
> sd 6:0:6:0: Attached scsi generic sg5 type 0
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
> modprobe[6234]: Oops 8813272891392 [1]
> Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
>
> Pid: 6234, CPU 14, comm: modprobe
> psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> ip is at kmem_cache_open+0x420/0xb20
I don't speak ia-64 so I'm having difficulties figuring out where
exactly it's crashing. Can you use addr2line or similar tool to show
us the exact location of the oops?
> unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
> rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa566659
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> csd : 0000000000000000 ssd : 0000000000000000
> b0 : a0000001001a99c0 b6 : a00000010035db20 b7 : a000000100087640
> f6 : 0fff5fffffffff0000000 f7 : 0ffeb8000000000000000
> f8 : 1000f8000000000000000 f9 : 100088000000000000000
> f10 : 10005fffffffff0000000 f11 : 1003e0000000000000080
> r1 : a000000101447ff0 r2 : 0000000000010007 r3 : 0000000000080800
> r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
> r11 : a000000101265d58 r12 : e000078627dffdf0 r13 : e000078627df0000
> r14 : 0000000000000009 r15 : a000000101037668 r16 : 0000000040004000
> r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
> r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
> r23 : 0000000000003fff r24 : 00000000000017ff r25 : 0000000000002fff
> r26 : a000000101037604 r27 : a000000101037600 r28 : a0000001010396e8
> r29 : a000000101037610 r30 : 0000000000000080 r31 : 0000000000000080
>
> Call Trace:
> [<a000000100016970>] show_stack+0x50/0xa0
> spà00078627dff9c0 bspà00078627df14b8
> [<a0000001000171e0>] show_regs+0x820/0x860
> spà00078627dffb90 bspà00078627df1460
> [<a00000010003bc60>] die+0x1a0/0x300
> spà00078627dffb90 bspà00078627df1420
> [<a0000001000688c0>] ia64_do_page_fault+0x8c0/0x9e0
> spà00078627dffb90 bspà00078627df13c8
> [<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
> spà00078627dffc20 bspà00078627df13c8
> [<a0000001001a9ca0>] kmem_cache_open+0x420/0xb20
> spà00078627dffdf0 bspà00078627df12e0
> [<a0000001001aabb0>] dma_kmalloc_cache+0x2d0/0x440
> spà00078627dffdf0 bspà00078627df1290
> [<a0000001001aae30>] get_slab+0x110/0x1a0
> spà00078627dffdf0 bspà00078627df1268
> [<a0000001001ab600>] __kmalloc+0xa0/0x260
> spà00078627dffdf0 bspà00078627df1230
> [<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
> spà00078627dffdf0 bspà00078627df11c8
> [<a000000100481720>] driver_probe_device+0x180/0x300
> spà00078627dffe20 bspà00078627df1190
> [<a000000100481980>] __driver_attach+0xe0/0x140
> spà00078627dffe20 bspà00078627df1160
> [<a000000100480380>] bus_for_each_dev+0xa0/0x140
> spà00078627dffe20 bspà00078627df1128
> [<a000000100481340>] driver_attach+0x40/0x60
> spà00078627dffe30 bspà00078627df1108
> [<a00000010047f1a0>] bus_add_driver+0x180/0x520
> spà00078627dffe30 bspà00078627df10c0
> [<a000000100482140>] driver_register+0x260/0x400
> spà00078627dffe30 bspà00078627df1078
> [<a0000001004d5f40>] scsi_register_driver+0x40/0x60
> spà00078627dffe30 bspà00078627df1058
> [<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
> spà00078627dffe30 bspà00078627df1038
> [<a00000010000a960>] do_one_initcall+0xe0/0x360
> spà00078627dffe30 bspà00078627df0ff0
> [<a000000100105ec0>] sys_init_module+0x1e0/0x4c0
> spà00078627dffe30 bspà00078627df0f78
> [<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
> spà00078627dffe30 bspà00078627df0f78
> [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
> spà00078627e00000 bspà00078627df0f78
> Disabling lock debugging due to kernel taint
> udevd-event[6232]: '/sbin/modprobe' abnormal exit
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 19:17 ` Pekka Enberg
@ 2010-01-14 20:32 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 20:32 UTC (permalink / raw)
To: Pekka Enberg; +Cc: Christoph Lameter, linux-ia64, linux-mm
* Pekka Enberg <penberg@cs.helsinki.fi>:
> >
> > Pid: 6234, CPU 14, comm: modprobe
> > psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> > ip is at kmem_cache_open+0x420/0xb20
>
> I don't speak ia-64 so I'm having difficulties figuring out where
> exactly it's crashing. Can you use addr2line or similar tool to show
> us the exact location of the oops?
In the meantime, I rebuilt the kernel with vm and slub debugging
turned on, but actually nothing really informative came out
during dmesg.
Anyhow, it still oopsed, but obviously the IP was different.
Here's the new oops, with addr2line output below.
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6151]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6151, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb20
unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
rnat: a0000001009cfb98 bsps: a00000010123b5d0 pr : aa99aaa6aa566659
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ada80 b6 : a000000100362280 b7 : a000000100685b20
f6 : 0fff5e070381c00000000 f7 : 0ffeb8000000000000000
f8 : 1000f8000000000000000 f9 : 100089200000000000000
f10 : 10005e070381c00000000 f11 : 1003e0000000000000070
r1 : a0000001014480f0 r2 : 0000000000010008 r3 : 0000000000080800
r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
r11 : a0000001012661b8 r12 : e00007061a02fdf0 r13 : e00007061a020000
r14 : 0000000000000009 r15 : a000000101037668 r16 : 00000000c0014d00
r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
r23 : 0000000000003fff r24 : 0000000000001b5f r25 : 00000000000036bf
r26 : a000000101037604 r27 : a000000101037600 r28 : a000000101037604
r29 : a000000101037610 r30 : 0000000000000070 r31 : 0000000000000070
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp=e00007061a02f9c0 bsp=e00007061a0214b8
[<a0000001000171c0>] show_regs+0x820/0x860
sp=e00007061a02fb90 bsp=e00007061a021460
[<a00000010003bc40>] die+0x1a0/0x300
sp=e00007061a02fb90 bsp=e00007061a021420
[<a000000100068940>] ia64_do_page_fault+0x8c0/0x9e0
sp=e00007061a02fb90 bsp=e00007061a0213c8
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e00007061a02fc20 bsp=e00007061a0213c8
[<a0000001001add60>] kmem_cache_open+0x420/0xb20
sp=e00007061a02fdf0 bsp=e00007061a0212e0
[<a0000001001aec70>] dma_kmalloc_cache+0x2d0/0x440
sp=e00007061a02fdf0 bsp=e00007061a021290
[<a0000001001aeef0>] get_slab+0x110/0x1a0
sp=e00007061a02fdf0 bsp=e00007061a021268
[<a0000001001af6c0>] __kmalloc+0xa0/0x260
sp=e00007061a02fdf0 bsp=e00007061a021230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp=e00007061a02fdf0 bsp=e00007061a0211c8
[<a00000010048ab20>] driver_probe_device+0x180/0x300
sp=e00007061a02fe20 bsp=e00007061a021190
[<a00000010048ad80>] __driver_attach+0xe0/0x140
sp=e00007061a02fe20 bsp=e00007061a021160
[<a000000100489780>] bus_for_each_dev+0xa0/0x140
sp=e00007061a02fe20 bsp=e00007061a021128
[<a00000010048a740>] driver_attach+0x40/0x60
sp=e00007061a02fe30 bsp=e00007061a021108
[<a0000001004885a0>] bus_add_driver+0x180/0x520
sp=e00007061a02fe30 bsp=e00007061a0210c0
[<a00000010048b540>] driver_register+0x260/0x400
sp=e00007061a02fe30 bsp=e00007061a021078
[<a0000001004df520>] scsi_register_driver+0x40/0x60
sp=e00007061a02fe30 bsp=e00007061a021058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e00007061a02fe30 bsp=e00007061a021038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e00007061a02fe30 bsp=e00007061a020ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp=e00007061a02fe30 bsp=e00007061a020f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e00007061a02fe30 bsp=e00007061a020f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e00007061a030000 bsp=e00007061a020f78
Disabling lock debugging due to kernel taint
udevd-event[6150]: '/sbin/modprobe' abnormal exit
coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
/usr/src/linux-2.6/include/linux/mm.h:543
538 #ifdef NODE_NOT_IN_PAGE_FLAGS
539 extern int page_to_nid(struct page *page);
540 #else
541 static inline int page_to_nid(struct page *page)
542 {
543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
544 }
545 #endif
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 20:32 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 20:32 UTC (permalink / raw)
To: Pekka Enberg; +Cc: Christoph Lameter, linux-ia64, linux-mm
* Pekka Enberg <penberg@cs.helsinki.fi>:
> >
> > Pid: 6234, CPU 14, comm: modprobe
> > psr : 0000101008526030 ifs : 8000000000000b1d ip : [<a0000001001a9ca0>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> > ip is at kmem_cache_open+0x420/0xb20
>
> I don't speak ia-64 so I'm having difficulties figuring out where
> exactly it's crashing. Can you use addr2line or similar tool to show
> us the exact location of the oops?
In the meantime, I rebuilt the kernel with vm and slub debugging
turned on, but actually nothing really informative came out
during dmesg.
Anyhow, it still oopsed, but obviously the IP was different.
Here's the new oops, with addr2line output below.
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6151]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6151, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb20
unat: 0000000000000000 pfs : 0000000000000b1d rsc : 0000000000000003
rnat: a0000001009cfb98 bsps: a00000010123b5d0 pr : aa99aaa6aa566659
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ada80 b6 : a000000100362280 b7 : a000000100685b20
f6 : 0fff5e070381c00000000 f7 : 0ffeb8000000000000000
f8 : 1000f8000000000000000 f9 : 100089200000000000000
f10 : 10005e070381c00000000 f11 : 1003e0000000000000070
r1 : a0000001014480f0 r2 : 0000000000010008 r3 : 0000000000080800
r8 : 0000000000000001 r9 : a0000001010375f8 r10 : 0000000000000000
r11 : a0000001012661b8 r12 : e00007061a02fdf0 r13 : e00007061a020000
r14 : 0000000000000009 r15 : a000000101037668 r16 : 00000000c0014d00
r17 : 0000000000000009 r18 : 0000000000000fff r19 : 0000000000000000
r20 : a000000101037658 r21 : 00000000000003ff r22 : 0000000000003fff
r23 : 0000000000003fff r24 : 0000000000001b5f r25 : 00000000000036bf
r26 : a000000101037604 r27 : a000000101037600 r28 : a000000101037604
r29 : a000000101037610 r30 : 0000000000000070 r31 : 0000000000000070
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
spà0007061a02f9c0 bspà0007061a0214b8
[<a0000001000171c0>] show_regs+0x820/0x860
spà0007061a02fb90 bspà0007061a021460
[<a00000010003bc40>] die+0x1a0/0x300
spà0007061a02fb90 bspà0007061a021420
[<a000000100068940>] ia64_do_page_fault+0x8c0/0x9e0
spà0007061a02fb90 bspà0007061a0213c8
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
spà0007061a02fc20 bspà0007061a0213c8
[<a0000001001add60>] kmem_cache_open+0x420/0xb20
spà0007061a02fdf0 bspà0007061a0212e0
[<a0000001001aec70>] dma_kmalloc_cache+0x2d0/0x440
spà0007061a02fdf0 bspà0007061a021290
[<a0000001001aeef0>] get_slab+0x110/0x1a0
spà0007061a02fdf0 bspà0007061a021268
[<a0000001001af6c0>] __kmalloc+0xa0/0x260
spà0007061a02fdf0 bspà0007061a021230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
spà0007061a02fdf0 bspà0007061a0211c8
[<a00000010048ab20>] driver_probe_device+0x180/0x300
spà0007061a02fe20 bspà0007061a021190
[<a00000010048ad80>] __driver_attach+0xe0/0x140
spà0007061a02fe20 bspà0007061a021160
[<a000000100489780>] bus_for_each_dev+0xa0/0x140
spà0007061a02fe20 bspà0007061a021128
[<a00000010048a740>] driver_attach+0x40/0x60
spà0007061a02fe30 bspà0007061a021108
[<a0000001004885a0>] bus_add_driver+0x180/0x520
spà0007061a02fe30 bspà0007061a0210c0
[<a00000010048b540>] driver_register+0x260/0x400
spà0007061a02fe30 bspà0007061a021078
[<a0000001004df520>] scsi_register_driver+0x40/0x60
spà0007061a02fe30 bspà0007061a021058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
spà0007061a02fe30 bspà0007061a021038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
spà0007061a02fe30 bspà0007061a020ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
spà0007061a02fe30 bspà0007061a020f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
spà0007061a02fe30 bspà0007061a020f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
spà0007061a030000 bspà0007061a020f78
Disabling lock debugging due to kernel taint
udevd-event[6150]: '/sbin/modprobe' abnormal exit
coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
/usr/src/linux-2.6/include/linux/mm.h:543
538 #ifdef NODE_NOT_IN_PAGE_FLAGS
539 extern int page_to_nid(struct page *page);
540 #else
541 static inline int page_to_nid(struct page *page)
542 {
543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
544 }
545 #endif
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 20:32 ` Alex Chiang
@ 2010-01-14 20:58 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 20:58 UTC (permalink / raw)
To: Alex Chiang; +Cc: Pekka Enberg, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Alex Chiang wrote:
> coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
> /usr/src/linux-2.6/include/linux/mm.h:543
>
> 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
> 539 extern int page_to_nid(struct page *page);
> 540 #else
> 541 static inline int page_to_nid(struct page *page)
> 542 {
> 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
> 544 }
> 545 #endif
That may mean that early_kmem_node_alloc gets a screwy page number from
the page allocator? ????
Can you print the address of page returned from new_slab() in
early_kmem_cache_node_alloc()?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 20:58 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 20:58 UTC (permalink / raw)
To: Alex Chiang; +Cc: Pekka Enberg, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Alex Chiang wrote:
> coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
> /usr/src/linux-2.6/include/linux/mm.h:543
>
> 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
> 539 extern int page_to_nid(struct page *page);
> 540 #else
> 541 static inline int page_to_nid(struct page *page)
> 542 {
> 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
> 544 }
> 545 #endif
That may mean that early_kmem_node_alloc gets a screwy page number from
the page allocator? ????
Can you print the address of page returned from new_slab() in
early_kmem_cache_node_alloc()?
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 20:58 ` Christoph Lameter
@ 2010-01-14 21:29 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 21:29 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Pekka Enberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 14 Jan 2010, Alex Chiang wrote:
>
> > coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
> > /usr/src/linux-2.6/include/linux/mm.h:543
> >
> > 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
> > 539 extern int page_to_nid(struct page *page);
> > 540 #else
> > 541 static inline int page_to_nid(struct page *page)
> > 542 {
> > 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
> > 544 }
> > 545 #endif
>
> That may mean that early_kmem_node_alloc gets a screwy page number from
> the page allocator? ????
>
> Can you print the address of page returned from new_slab() in
> early_kmem_cache_node_alloc()?
diff --git a/mm/slub.c b/mm/slub.c
index 9e86e6b..2909cc4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2062,7 +2062,7 @@ init_kmem_cache_node(struct kmem_cache_node *n, struct kme
m_cache *s)
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
t node)
BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
page = new_slab(kmalloc_caches, gfpflags, node);
+ printk("page from new_slab() %#llx\n", page);
BUG_ON(!page);
if (page_to_nid(page) != node) {
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
page from new_slab() 0xa07fffffff900000
page from new_slab() 0xa07fffffe39000e0
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
[...]
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6043]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg container(+) button usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6043, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb40
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 21:29 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-14 21:29 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Pekka Enberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 14 Jan 2010, Alex Chiang wrote:
>
> > coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
> > /usr/src/linux-2.6/include/linux/mm.h:543
> >
> > 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
> > 539 extern int page_to_nid(struct page *page);
> > 540 #else
> > 541 static inline int page_to_nid(struct page *page)
> > 542 {
> > 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
> > 544 }
> > 545 #endif
>
> That may mean that early_kmem_node_alloc gets a screwy page number from
> the page allocator? ????
>
> Can you print the address of page returned from new_slab() in
> early_kmem_cache_node_alloc()?
diff --git a/mm/slub.c b/mm/slub.c
index 9e86e6b..2909cc4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2062,7 +2062,7 @@ init_kmem_cache_node(struct kmem_cache_node *n, struct kme
m_cache *s)
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
t node)
BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
page = new_slab(kmalloc_caches, gfpflags, node);
+ printk("page from new_slab() %#llx\n", page);
BUG_ON(!page);
if (page_to_nid(page) != node) {
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
page from new_slab() 0xa07fffffff900000
page from new_slab() 0xa07fffffe39000e0
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
[...]
Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
modprobe[6043]: Oops 8813272891392 [1]
Modules linked in: sr_mod(+) sg container(+) button usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6043, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kmem_cache_open+0x420/0xb40
^ permalink raw reply related [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 21:29 ` Alex Chiang
@ 2010-01-14 21:31 ` Pekka Enberg
-1 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-14 21:31 UTC (permalink / raw)
To: Alex Chiang; +Cc: Christoph Lameter, linux-ia64, linux-mm
Alex Chiang wrote:
> * Christoph Lameter <cl@linux-foundation.org>:
>> On Thu, 14 Jan 2010, Alex Chiang wrote:
>>
>>> coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
>>> /usr/src/linux-2.6/include/linux/mm.h:543
>>>
>>> 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
>>> 539 extern int page_to_nid(struct page *page);
>>> 540 #else
>>> 541 static inline int page_to_nid(struct page *page)
>>> 542 {
>>> 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
>>> 544 }
>>> 545 #endif
>> That may mean that early_kmem_node_alloc gets a screwy page number from
>> the page allocator? ????
>>
>> Can you print the address of page returned from new_slab() in
>> early_kmem_cache_node_alloc()?
>
> diff --git a/mm/slub.c b/mm/slub.c
> index 9e86e6b..2909cc4 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -2062,7 +2062,7 @@ init_kmem_cache_node(struct kmem_cache_node *n, struct kme
> m_cache *s)
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
> t node)
> BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
>
> page = new_slab(kmalloc_caches, gfpflags, node);
> + printk("page from new_slab() %#llx\n", page);
>
> BUG_ON(!page);
> if (page_to_nid(page) != node) {
>
> Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
> page from new_slab() 0xa07fffffff900000
> page from new_slab() 0xa07fffffe39000e0
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
> SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
>
> [...]
>
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
> modprobe[6043]: Oops 8813272891392 [1]
> Modules linked in: sr_mod(+) sg container(+) button usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
>
> Pid: 6043, CPU 9, comm: modprobe
> psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> ip is at kmem_cache_open+0x420/0xb40
>
Christoph, we've seen similar issue on s390:
http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commitdiff;h=ff64d6c42abaffdb8686c77930eafb4da5b676f5
Maybe your changes are trigger a latent bug with DEFINE_PER_CPU handling
in SLUB?
Pekka
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 21:31 ` Pekka Enberg
0 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-14 21:31 UTC (permalink / raw)
To: Alex Chiang; +Cc: Christoph Lameter, linux-ia64, linux-mm
Alex Chiang wrote:
> * Christoph Lameter <cl@linux-foundation.org>:
>> On Thu, 14 Jan 2010, Alex Chiang wrote:
>>
>>> coffee0:/usr/src/linux-2.6 # addr2line 0xa0000001001add60 -e vmlinux
>>> /usr/src/linux-2.6/include/linux/mm.h:543
>>>
>>> 538 #ifdef NODE_NOT_IN_PAGE_FLAGS
>>> 539 extern int page_to_nid(struct page *page);
>>> 540 #else
>>> 541 static inline int page_to_nid(struct page *page)
>>> 542 {
>>> 543 return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
>>> 544 }
>>> 545 #endif
>> That may mean that early_kmem_node_alloc gets a screwy page number from
>> the page allocator? ????
>>
>> Can you print the address of page returned from new_slab() in
>> early_kmem_cache_node_alloc()?
>
> diff --git a/mm/slub.c b/mm/slub.c
> index 9e86e6b..2909cc4 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -2062,7 +2062,7 @@ init_kmem_cache_node(struct kmem_cache_node *n, struct kme
> m_cache *s)
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
> t node)
> BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
>
> page = new_slab(kmalloc_caches, gfpflags, node);
> + printk("page from new_slab() %#llx\n", page);
>
> BUG_ON(!page);
> if (page_to_nid(page) != node) {
>
> Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
> page from new_slab() 0xa07fffffff900000
> page from new_slab() 0xa07fffffe39000e0
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
> SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
>
> [...]
>
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
> modprobe[6043]: Oops 8813272891392 [1]
> Modules linked in: sr_mod(+) sg container(+) button usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
>
> Pid: 6043, CPU 9, comm: modprobe
> psr : 0000101008526010 ifs : 8000000000000b1d ip : [<a0000001001add60>] Not tainted (2.6.33-rc3-next-20100111-dirty)
> ip is at kmem_cache_open+0x420/0xb40
>
Christoph, we've seen similar issue on s390:
http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commitdiff;hÿ64d6c42abaffdb8686c77930eafb4da5b676f5
Maybe your changes are trigger a latent bug with DEFINE_PER_CPU handling
in SLUB?
Pekka
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 21:31 ` Pekka Enberg
@ 2010-01-14 21:59 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 21:59 UTC (permalink / raw)
To: Pekka Enberg; +Cc: Alex Chiang, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Pekka Enberg wrote:
> http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commitdiff;h=ff64d6c42abaffdb8686c77930eafb4da5b676f5
> Maybe your changes are trigger a latent bug with DEFINE_PER_CPU handling in
> SLUB?
There is no node -> cpu mapping like that in SLUB.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 21:59 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 21:59 UTC (permalink / raw)
To: Pekka Enberg; +Cc: Alex Chiang, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Pekka Enberg wrote:
> http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commitdiff;hÿ64d6c42abaffdb8686c77930eafb4da5b676f5
> Maybe your changes are trigger a latent bug with DEFINE_PER_CPU handling in
> SLUB?
There is no node -> cpu mapping like that in SLUB.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-14 21:29 ` Alex Chiang
@ 2010-01-14 22:01 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 22:01 UTC (permalink / raw)
To: Alex Chiang; +Cc: Pekka Enberg, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Alex Chiang wrote:
> @@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
> t node)
> BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
>
> page = new_slab(kmalloc_caches, gfpflags, node);
> + printk("page from new_slab() %#llx\n", page);
>
> BUG_ON(!page);
> if (page_to_nid(page) != node) {
>
> Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
> page from new_slab() 0xa07fffffff900000
> page from new_slab() 0xa07fffffe39000e0
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
> SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
>
> [...]
>
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
Garg. We did not hit the point before the crash.
Must be an insipient page_to_nid somewhere.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-14 22:01 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-14 22:01 UTC (permalink / raw)
To: Alex Chiang; +Cc: Pekka Enberg, linux-ia64, linux-mm
On Thu, 14 Jan 2010, Alex Chiang wrote:
> @@ -2100,6 +2100,7 @@ static void early_kmem_cache_node_alloc(gfp_t gfpflags, in
> t node)
> BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
>
> page = new_slab(kmalloc_caches, gfpflags, node);
> + printk("page from new_slab() %#llx\n", page);
>
> BUG_ON(!page);
> if (page_to_nid(page) != node) {
>
> Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
> page from new_slab() 0xa07fffffff900000
> page from new_slab() 0xa07fffffe39000e0
> SLUB: Unable to allocate memory from node 2
> SLUB: Allocating a useless per node structure in order to be able to continue
> SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
>
> [...]
>
> Unable to handle kernel paging request at virtual address a07ffffe5a7838a8
Garg. We did not hit the point before the crash.
Must be an insipient page_to_nid somewhere.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-13 0:29 SLUB ia64 linux-next crash bisected to 756dee75 Alex Chiang
@ 2010-01-15 20:07 ` Christoph Lameter
2010-01-14 15:18 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-15 20:07 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1375 bytes --]
Another stab at the problem:
We have the following code in init_kmem_cache_nodes()
if (slab_state >= UP)
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
If the slab bootstrap is complete (UP) (which is the case here) then
the structure pointing to by s was allocated using kmalloc itself. So
virt_to_page() works for the typical.
The changeset results in the use of a statically allocated structure
after boot is complete. Now page_to_nid(virt_to_page(s)) runs on a
global data address.
Could this be problematic for some reasons on IA64?
The following patch makes init_kmem_cache_nodes assume 0
for statically allocated kmem_cache structures even after
boot is complete.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && s < kmalloc_caches &&
+ s > kmalloc_caches + KMALLOC_CACHES)
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
[-- Attachment #2: Type: TEXT/PLAIN, Size: 49000 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc1
# Tue Jan 12 15:47:09 2010
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_API=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-15 20:07 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-15 20:07 UTC (permalink / raw)
To: Alex Chiang; +Cc: penberg, linux-ia64, linux-mm
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1375 bytes --]
Another stab at the problem:
We have the following code in init_kmem_cache_nodes()
if (slab_state >= UP)
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
If the slab bootstrap is complete (UP) (which is the case here) then
the structure pointing to by s was allocated using kmalloc itself. So
virt_to_page() works for the typical.
The changeset results in the use of a statically allocated structure
after boot is complete. Now page_to_nid(virt_to_page(s)) runs on a
global data address.
Could this be problematic for some reasons on IA64?
The following patch makes init_kmem_cache_nodes assume 0
for statically allocated kmem_cache structures even after
boot is complete.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && s < kmalloc_caches &&
+ s > kmalloc_caches + KMALLOC_CACHES)
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
[-- Attachment #2: Type: TEXT/PLAIN, Size: 49000 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc1
# Tue Jan 12 15:47:09 2010
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_API=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-15 20:07 ` Christoph Lameter
@ 2010-01-15 20:35 ` Lee Schermerhorn
-1 siblings, 0 replies; 59+ messages in thread
From: Lee Schermerhorn @ 2010-01-15 20:35 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 2010-01-15 at 14:07 -0600, Christoph Lameter wrote:
> Another stab at the problem:
>
> We have the following code in init_kmem_cache_nodes()
>
> if (slab_state >= UP)
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
>
> If the slab bootstrap is complete (UP) (which is the case here) then
> the structure pointing to by s was allocated using kmalloc itself. So
> virt_to_page() works for the typical.
>
> The changeset results in the use of a statically allocated structure
> after boot is complete. Now page_to_nid(virt_to_page(s)) runs on a
> global data address.
>
> Could this be problematic for some reasons on IA64?
Dunno. Alex or I will check and get back to you.
>
> The following patch makes init_kmem_cache_nodes assume 0
> for statically allocated kmem_cache structures even after
> boot is complete.
I believe that on Alex's platform, the kernel will get loaded into "node
2", the hardware interleaved pseudo-node, because it's located at phys
0..., and has sufficient space. So, this might not work here.
>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
>
> ---
> mm/slub.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/mm/slub.c
> ===================================================================
> --- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP &&
> s < kmalloc_caches &&
> + s > kmalloc_caches + KMALLOC_CACHES)
??? can this ever be so? for positive KMALLOC_CACHES, I mean...
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
>
>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-15 20:35 ` Lee Schermerhorn
0 siblings, 0 replies; 59+ messages in thread
From: Lee Schermerhorn @ 2010-01-15 20:35 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 2010-01-15 at 14:07 -0600, Christoph Lameter wrote:
> Another stab at the problem:
>
> We have the following code in init_kmem_cache_nodes()
>
> if (slab_state >= UP)
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
>
> If the slab bootstrap is complete (UP) (which is the case here) then
> the structure pointing to by s was allocated using kmalloc itself. So
> virt_to_page() works for the typical.
>
> The changeset results in the use of a statically allocated structure
> after boot is complete. Now page_to_nid(virt_to_page(s)) runs on a
> global data address.
>
> Could this be problematic for some reasons on IA64?
Dunno. Alex or I will check and get back to you.
>
> The following patch makes init_kmem_cache_nodes assume 0
> for statically allocated kmem_cache structures even after
> boot is complete.
I believe that on Alex's platform, the kernel will get loaded into "node
2", the hardware interleaved pseudo-node, because it's located at phys
0..., and has sufficient space. So, this might not work here.
>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
>
> ---
> mm/slub.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/mm/slub.c
> =================================> --- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP &&
> s < kmalloc_caches &&
> + s > kmalloc_caches + KMALLOC_CACHES)
??? can this ever be so? for positive KMALLOC_CACHES, I mean...
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
>
>
>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-15 20:35 ` Lee Schermerhorn
@ 2010-01-15 23:32 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-15 23:32 UTC (permalink / raw)
To: Lee Schermerhorn; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 15 Jan 2010, Lee Schermerhorn wrote:
> > The following patch makes init_kmem_cache_nodes assume 0
> > for statically allocated kmem_cache structures even after
> > boot is complete.
>
> I believe that on Alex's platform, the kernel will get loaded into "node
> 2", the hardware interleaved pseudo-node, because it's located at phys
> 0..., and has sufficient space. So, this might not work here.
Hmm. thats gets us into some strange issues.
> > Index: linux-2.6/mm/slub.c
> > ===================================================================
> > --- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
> > +++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
> > @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> > int node;
> > int local_node;
> >
> > - if (slab_state >= UP)
> > + if (slab_state >= UP &&
>
>
> > s < kmalloc_caches &&
> > + s > kmalloc_caches + KMALLOC_CACHES)
>
> ??? can this ever be so? for positive KMALLOC_CACHES, I mean...
An allocated kmem_cache structure is definitely not in the range of the
kmalloc_caches array. This is basically checking if s is pointing to the
static kmalloc array.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-15 23:32 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-15 23:32 UTC (permalink / raw)
To: Lee Schermerhorn; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 15 Jan 2010, Lee Schermerhorn wrote:
> > The following patch makes init_kmem_cache_nodes assume 0
> > for statically allocated kmem_cache structures even after
> > boot is complete.
>
> I believe that on Alex's platform, the kernel will get loaded into "node
> 2", the hardware interleaved pseudo-node, because it's located at phys
> 0..., and has sufficient space. So, this might not work here.
Hmm. thats gets us into some strange issues.
> > Index: linux-2.6/mm/slub.c
> > =================================> > --- linux-2.6.orig/mm/slub.c 2010-01-15 14:02:54.000000000 -0600
> > +++ linux-2.6/mm/slub.c 2010-01-15 14:04:47.000000000 -0600
> > @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> > int node;
> > int local_node;
> >
> > - if (slab_state >= UP)
> > + if (slab_state >= UP &&
>
>
> > s < kmalloc_caches &&
> > + s > kmalloc_caches + KMALLOC_CACHES)
>
> ??? can this ever be so? for positive KMALLOC_CACHES, I mean...
An allocated kmem_cache structure is definitely not in the range of the
kmalloc_caches array. This is basically checking if s is pointing to the
static kmalloc array.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-15 23:32 ` Christoph Lameter
@ 2010-01-19 18:53 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 18:53 UTC (permalink / raw)
To: Lee Schermerhorn; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 15 Jan 2010, Christoph Lameter wrote:
> An allocated kmem_cache structure is definitely not in the range of the
> kmalloc_caches array. This is basically checking if s is pointing to the
> static kmalloc array.
Check was wrong.. Sigh...
---
mm/slub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-19 12:50:20.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-19 12:51:30.000000000 -0600
@@ -2148,7 +2148,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-19 18:53 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 18:53 UTC (permalink / raw)
To: Lee Schermerhorn; +Cc: Alex Chiang, penberg, linux-ia64, linux-mm
On Fri, 15 Jan 2010, Christoph Lameter wrote:
> An allocated kmem_cache structure is definitely not in the range of the
> kmalloc_caches array. This is basically checking if s is pointing to the
> static kmalloc array.
Check was wrong.. Sigh...
---
mm/slub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/mm/slub.c
=================================--- linux-2.6.orig/mm/slub.c 2010-01-19 12:50:20.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-19 12:51:30.000000000 -0600
@@ -2148,7 +2148,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 18:53 ` Christoph Lameter
@ 2010-01-19 20:02 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-19 20:02 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Fri, 15 Jan 2010, Christoph Lameter wrote:
>
> > An allocated kmem_cache structure is definitely not in the range of the
> > kmalloc_caches array. This is basically checking if s is pointing to the
> > static kmalloc array.
>
> Check was wrong.. Sigh...
>
> ---
> mm/slub.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/mm/slub.c
> ===================================================================
> --- linux-2.6.orig/mm/slub.c 2010-01-19 12:50:20.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-19 12:51:30.000000000 -0600
> @@ -2148,7 +2148,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
Well, making progress (maybe?).
Now we're hitting a BUG_ON().
Interestingly, the machine now boots all the way to a login
prompt, whereas previously, it would simply hang.
/ac
kernel BUG at mm/slub.c:2839!
modprobe[6015]: bugcheck! 0 [1]
Modules linked in: sr_mod(+) button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6015, CPU 0, comm: modprobe
psr : 00001010085a6010 ifs : 8000000000000289 ip : [<a0000001001ae800>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kfree+0xe0/0x260
unat: 0000000000000000 pfs : 0000000000000289 rsc : 0000000000000003
rnat: e0000786165b1720 bsps: aa99aaa6aa595999 pr : aa99aaa6aa565959
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ae800 b6 : a0000001005e4360 b7 : a00000010046de40
f6 : 1003e0000000cb95d6936 f7 : 1003e0000000000000190
f8 : 1003e0000000cb95d67a6 f9 : 1003e0000000000000001
f10 : 100079cfffffffc583503 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 00000000000017ec r3 : 000000000000fffe
r8 : 0000000000000021 r9 : 000000000000ffff r10 : ffffffffffff41ef
r11 : 0000000000000000 r12 : e0000786165bfdf0 r13 : e0000786165b0000
r14 : 00000000000017ec r15 : 0000000000004000 r16 : a00000010119c62c
r17 : a000000101265d70 r18 : 0000000000000000 r19 : a0000001005e4360
r20 : a0000001018edb38 r21 : 000000000000bdf3 r22 : 00000000000fffff
r23 : 0000000000100000 r24 : a000000102a3ddc8 r25 : a000000100a0dca8
r26 : a00000010046de40 r27 : a000000102a3ddc8 r28 : a000000102a3dec0
r29 : a000000100a0dc98 r30 : a00000010046dd80 r31 : a000000102a3ddc0
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp=e0000786165bf9c0 bsp=e0000786165b1368
[<a0000001000171c0>] show_regs+0x820/0x860
sp=e0000786165bfb90 bsp=e0000786165b1310
[<a00000010003bc40>] die+0x1a0/0x300
sp=e0000786165bfb90 bsp=e0000786165b12d0
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
sp=e0000786165bfb90 bsp=e0000786165b12a0
[<a00000010003d460>] ia64_bad_break+0x220/0x440
sp=e0000786165bfb90 bsp=e0000786165b1278
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e0000786165bfc20 bsp=e0000786165b1278
[<a0000001001ae800>] kfree+0xe0/0x260
sp=e0000786165bfdf0 bsp=e0000786165b1230
[<a000000207ce1df0>] sr_probe+0xad0/0xf20 [sr_mod]
sp=e0000786165bfdf0 bsp=e0000786165b11c8
[<a00000010048ab40>] driver_probe_device+0x180/0x300
sp=e0000786165bfe20 bsp=e0000786165b1190
[<a00000010048ada0>] __driver_attach+0xe0/0x140
sp=e0000786165bfe20 bsp=e0000786165b1160
[<a0000001004897a0>] bus_for_each_dev+0xa0/0x140
sp=e0000786165bfe20 bsp=e0000786165b1128
[<a00000010048a760>] driver_attach+0x40/0x60
sp=e0000786165bfe30 bsp=e0000786165b1108
[<a0000001004885c0>] bus_add_driver+0x180/0x520
sp=e0000786165bfe30 bsp=e0000786165b10c0
[<a00000010048b560>] driver_register+0x260/0x400
sp=e0000786165bfe30 bsp=e0000786165b1078
[<a0000001004df540>] scsi_register_driver+0x40/0x60
sp=e0000786165bfe30 bsp=e0000786165b1058
[<a000000207d10070>] init_sr+0x70/0x140 [sr_mod]
sp=e0000786165bfe30 bsp=e0000786165b1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e0000786165bfe30 bsp=e0000786165b0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp=e0000786165bfe30 bsp=e0000786165b0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e0000786165bfe30 bsp=e0000786165b0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e0000786165c0000 bsp=e0000786165b0f78
Disabling lock debugging due to kernel taint
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-19 20:02 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-19 20:02 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Fri, 15 Jan 2010, Christoph Lameter wrote:
>
> > An allocated kmem_cache structure is definitely not in the range of the
> > kmalloc_caches array. This is basically checking if s is pointing to the
> > static kmalloc array.
>
> Check was wrong.. Sigh...
>
> ---
> mm/slub.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/mm/slub.c
> =================================> --- linux-2.6.orig/mm/slub.c 2010-01-19 12:50:20.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-19 12:51:30.000000000 -0600
> @@ -2148,7 +2148,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
Well, making progress (maybe?).
Now we're hitting a BUG_ON().
Interestingly, the machine now boots all the way to a login
prompt, whereas previously, it would simply hang.
/ac
kernel BUG at mm/slub.c:2839!
modprobe[6015]: bugcheck! 0 [1]
Modules linked in: sr_mod(+) button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6015, CPU 0, comm: modprobe
psr : 00001010085a6010 ifs : 8000000000000289 ip : [<a0000001001ae800>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kfree+0xe0/0x260
unat: 0000000000000000 pfs : 0000000000000289 rsc : 0000000000000003
rnat: e0000786165b1720 bsps: aa99aaa6aa595999 pr : aa99aaa6aa565959
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ae800 b6 : a0000001005e4360 b7 : a00000010046de40
f6 : 1003e0000000cb95d6936 f7 : 1003e0000000000000190
f8 : 1003e0000000cb95d67a6 f9 : 1003e0000000000000001
f10 : 100079cfffffffc583503 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 00000000000017ec r3 : 000000000000fffe
r8 : 0000000000000021 r9 : 000000000000ffff r10 : ffffffffffff41ef
r11 : 0000000000000000 r12 : e0000786165bfdf0 r13 : e0000786165b0000
r14 : 00000000000017ec r15 : 0000000000004000 r16 : a00000010119c62c
r17 : a000000101265d70 r18 : 0000000000000000 r19 : a0000001005e4360
r20 : a0000001018edb38 r21 : 000000000000bdf3 r22 : 00000000000fffff
r23 : 0000000000100000 r24 : a000000102a3ddc8 r25 : a000000100a0dca8
r26 : a00000010046de40 r27 : a000000102a3ddc8 r28 : a000000102a3dec0
r29 : a000000100a0dc98 r30 : a00000010046dd80 r31 : a000000102a3ddc0
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
spà000786165bf9c0 bspà000786165b1368
[<a0000001000171c0>] show_regs+0x820/0x860
spà000786165bfb90 bspà000786165b1310
[<a00000010003bc40>] die+0x1a0/0x300
spà000786165bfb90 bspà000786165b12d0
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
spà000786165bfb90 bspà000786165b12a0
[<a00000010003d460>] ia64_bad_break+0x220/0x440
spà000786165bfb90 bspà000786165b1278
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
spà000786165bfc20 bspà000786165b1278
[<a0000001001ae800>] kfree+0xe0/0x260
spà000786165bfdf0 bspà000786165b1230
[<a000000207ce1df0>] sr_probe+0xad0/0xf20 [sr_mod]
spà000786165bfdf0 bspà000786165b11c8
[<a00000010048ab40>] driver_probe_device+0x180/0x300
spà000786165bfe20 bspà000786165b1190
[<a00000010048ada0>] __driver_attach+0xe0/0x140
spà000786165bfe20 bspà000786165b1160
[<a0000001004897a0>] bus_for_each_dev+0xa0/0x140
spà000786165bfe20 bspà000786165b1128
[<a00000010048a760>] driver_attach+0x40/0x60
spà000786165bfe30 bspà000786165b1108
[<a0000001004885c0>] bus_add_driver+0x180/0x520
spà000786165bfe30 bspà000786165b10c0
[<a00000010048b560>] driver_register+0x260/0x400
spà000786165bfe30 bspà000786165b1078
[<a0000001004df540>] scsi_register_driver+0x40/0x60
spà000786165bfe30 bspà000786165b1058
[<a000000207d10070>] init_sr+0x70/0x140 [sr_mod]
spà000786165bfe30 bspà000786165b1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
spà000786165bfe30 bspà000786165b0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
spà000786165bfe30 bspà000786165b0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
spà000786165bfe30 bspà000786165b0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
spà000786165c0000 bspà000786165b0f78
Disabling lock debugging due to kernel taint
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 20:02 ` Alex Chiang
@ 2010-01-19 20:29 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 20:29 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Tue, 19 Jan 2010, Alex Chiang wrote:
> Well, making progress (maybe?).
Yes I think this is the fix.
> Now we're hitting a BUG_ON().
Thats a kfree of an object not allocated with a slab allocator.
Recovery is easy in such a case: Dont free the object.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-19 20:29 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 20:29 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Tue, 19 Jan 2010, Alex Chiang wrote:
> Well, making progress (maybe?).
Yes I think this is the fix.
> Now we're hitting a BUG_ON().
Thats a kfree of an object not allocated with a slab allocator.
Recovery is easy in such a case: Dont free the object.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 20:29 ` Christoph Lameter
@ 2010-01-19 21:29 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-19 21:29 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Tue, 19 Jan 2010, Alex Chiang wrote:
>
> > Well, making progress (maybe?).
>
> Yes I think this is the fix.
>
> > Now we're hitting a BUG_ON().
>
> Thats a kfree of an object not allocated with a slab allocator.
> Recovery is easy in such a case: Dont free the object.
I don't get it.
static int sr_probe(struct device *dev)
{
/* ... */
cd = kzalloc(sizeof(*cd), GFP_KERNEL);
if (!cd)
goto fail;
/* ... */
fail_put:
put_disk(disk);
fail_free:
kfree(cd);
}
The kfree() is balanced with kzalloc(). Unless the stack trace is
lying to us?
/ac
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-19 21:29 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-19 21:29 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Tue, 19 Jan 2010, Alex Chiang wrote:
>
> > Well, making progress (maybe?).
>
> Yes I think this is the fix.
>
> > Now we're hitting a BUG_ON().
>
> Thats a kfree of an object not allocated with a slab allocator.
> Recovery is easy in such a case: Dont free the object.
I don't get it.
static int sr_probe(struct device *dev)
{
/* ... */
cd = kzalloc(sizeof(*cd), GFP_KERNEL);
if (!cd)
goto fail;
/* ... */
fail_put:
put_disk(disk);
fail_free:
kfree(cd);
}
The kfree() is balanced with kzalloc(). Unless the stack trace is
lying to us?
/ac
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 21:29 ` Alex Chiang
@ 2010-01-19 21:50 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 21:50 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Tue, 19 Jan 2010, Alex Chiang wrote:
> > Thats a kfree of an object not allocated with a slab allocator.
> > Recovery is easy in such a case: Dont free the object.
>
> I don't get it.
>
> static int sr_probe(struct device *dev)
> {
> /* ... */
>
> cd = kzalloc(sizeof(*cd), GFP_KERNEL);
> if (!cd)
> goto fail;
>
> /* ... */
>
> fail_put:
> put_disk(disk);
> fail_free:
> kfree(cd);
> }
>
> The kfree() is balanced with kzalloc(). Unless the stack trace is
> lying to us?
cd is pointing for some reason to an object not allocated. This would mean
that kzalloc returns such an object(?). Theoretically one could free a
statically allocated object using kmem_cache_free() and it would be put on
thefreelist. Then it could be returned from kzalloc (all only if debuging
is off)... so
Could you boot with full debugging?
Either switch on
CONFIG_SLUB_DEBUG_ON
or pass
slub_debug
on the kernel command line.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-19 21:50 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-19 21:50 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Tue, 19 Jan 2010, Alex Chiang wrote:
> > Thats a kfree of an object not allocated with a slab allocator.
> > Recovery is easy in such a case: Dont free the object.
>
> I don't get it.
>
> static int sr_probe(struct device *dev)
> {
> /* ... */
>
> cd = kzalloc(sizeof(*cd), GFP_KERNEL);
> if (!cd)
> goto fail;
>
> /* ... */
>
> fail_put:
> put_disk(disk);
> fail_free:
> kfree(cd);
> }
>
> The kfree() is balanced with kzalloc(). Unless the stack trace is
> lying to us?
cd is pointing for some reason to an object not allocated. This would mean
that kzalloc returns such an object(?). Theoretically one could free a
statically allocated object using kmem_cache_free() and it would be put on
thefreelist. Then it could be returned from kzalloc (all only if debuging
is off)... so
Could you boot with full debugging?
Either switch on
CONFIG_SLUB_DEBUG_ON
or pass
slub_debug
on the kernel command line.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 21:50 ` Christoph Lameter
@ 2010-01-20 22:46 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-20 22:46 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
>
> Could you boot with full debugging?
>
> Either switch on
>
> CONFIG_SLUB_DEBUG_ON
>
> or pass
>
> slub_debug
>
> on the kernel command line.
>
coffee0:/usr/src/linux-2.6 # grep SLUB .config
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
boot log below.
ELILO boot: achiang slub_debug
Uncompressing Linux... done
Loading file initrd-2.6.33-rc3-next-20100111-dirty...done
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc3-next-20100111-dirty (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #20 SMP Tue Jan 19 12:34:56 MST 2010
EFI v2.00 by HP: SALsystab=0x707fd39c088 ACPI 2.0=0x707fd7d0000 HCDP=0x707fd7f6998 SMBIOS=0x1ffec000
booting generic kernel on platform hpzx1
PCDP: v3 at 0x707fd7f6998
Early serial console at MMIO 0xffc30064000 (options '9600n8')
bootconsole [uart8250] enabled
ACPI: RSDP 00000707fd7d0000 00024 (v02 HP)
ACPI: XSDT 00000707fd7f6a80 0007C (v01 HP rx8640 00000000 HP 00000000)
ACPI: FACP 00000707fd7f65b0 000F4 (v03 HP rx8640 00000000 HP 00000000)
ACPI Warning: 32/64X length mismatch in Pm1aEventBlock: 32/16 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: Invalid length for Pm1aEventBlock: 16, using default 32 (20091214/tbfadt-607)
ACPI: DSDT 00000707fd7d03d0 2618B (v02 HP CELL000 00000000 HP 00000000)
ACPI: FACS 00000707fd7d0028 00040
ACPI: SPCR 00000707fd7d0068 00050 (v01 HP rx8640 00000000 HP 00000000)
ACPI: DBGP 00000707fd7d00b8 00034 (v01 HP rx8640 00000000 HP 00000000)
ACPI: APIC 00000707fd7d01a0 0022C (v01 HP rx8640 00000000 HP 00000000)
ACPI: SLIT 00000707fd7f66a8 00045 (v01 HP rx8640 00000000 HP 00000000)
ACPI: CPEP 00000707fd7f66f0 000AC (v01 HP rx8640 00000000 HP 00000000)
ACPI: SRAT 00000707fd7f67a0 001F8 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SPMI 00000707fd7f6560 00050 (v04 HP rx8640 00000000 HP 00000000)
ACPI: OEMD 00000707fd7d0128 00074 (v01 HP rx8640 00000000 HP 00000000)
ACPI: HPET 00000707fd7d00f0 00038 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SSDT 00000707fd7f6b78 25088 (v02 HP CELL001 00000000 HP 00000000)
ACPI: Local APIC address c0000000fee00000
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c7000 (6057711 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc3-next-20100111-dirty root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug slub_debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
Console: colour dummy device 80x25
Calibrating delay loop... 3194.88 BogoMIPS (lpj=6389760)
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Mount-cache hash table entries: 4096
ACPI: Core revision 20091214
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 141 cycles)
CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 146 cycles)
CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 146 cycles)
CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 5: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 6: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 337 cycles)
CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 7: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 337 cycles)
CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 8: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 652 cycles)
CPU 8: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 9: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 652 cycles)
CPU 9: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 10: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 652 cycles)
CPU 10: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 656 cycles)
CPU 11: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 12: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 656 cycles)
CPU 12: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 13: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 652 cycles)
CPU 13: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 14: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 655 cycles)
CPU 14: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 654 cycles)
CPU 15: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
Brought up 16 CPUs
Total of 16 processors activated (51118.08 BogoMIPS).
DMI 2.5 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOSAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [L000] (0000:00)
pci_root HWP0002:00: host bridge window [io 0x0000-0x0fff]
pci_root HWP0002:00: host bridge window [mem 0xf0000000000-0xf007edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0000:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0000:00:01.0: PME# supported from D3hot
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0000:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0000:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0000:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0000:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0000:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0000:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0000:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0000:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0000:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0000:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0000:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0000:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0000:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0000:1c)
pci_root HWP0002:01: host bridge window [io 0x1000-0x1fff]
pci_root HWP0002:01: host bridge window [mem 0xf0080000000-0xf00fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:1c:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:1c:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:1c:01.0: reg 20: [io 0x1000-0x103f]
pci 0000:1c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:1c:01.0: PME# supported from D0 D3hot
pci 0000:1c:01.0: PME# disabled
pci 0000:1c:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:1c:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:1c:01.1: reg 20: [io 0x1040-0x107f]
pci 0000:1c:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0000:1c:01.1: PME# supported from D0 D3hot
pci 0000:1c:01.1: PME# disabled
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0000:38)
pci_root HWP0002:02: host bridge window [io 0x2000-0x3fff]
pci_root HWP0002:02: host bridge window [mem 0xf1000000000-0xf107edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:38:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:38:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:38:01.0: reg 20: [io 0x2000-0x203f]
pci 0000:38:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:38:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:38:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:38:01.1: reg 20: [io 0x2040-0x207f]
pci 0000:38:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0000:54)
pci_root HWP0002:03: host bridge window [io 0x4000-0x5fff]
pci_root HWP0002:03: host bridge window [mem 0xf2000000000-0xf207edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0000:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0000:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0000:70)
pci_root HWP0002:04: host bridge window [io 0x6000-0x7fff]
pci_root HWP0002:04: host bridge window [mem 0xf3000000000-0xf307edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0000:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0000:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0000:8c)
pci_root HWP0002:05: host bridge window [io 0x8000-0x9fff]
pci_root HWP0002:05: host bridge window [mem 0xf4000000000-0xf407edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:8d:01.0: reg 14: [mem 0x84132000-0x84132fff 64bit]
pci 0000:8d:01.0: reg 20: [mem 0x84133000-0x84133fff 64bit]
pci 0000:8d:01.1: reg 14: [mem 0x84134000-0x84134fff 64bit]
pci 0000:8d:01.1: reg 1c: [mem 0x84000000-0x840fffff 64bit pref]
pci 0000:8d:02.0: reg 10: [mem 0x84130000-0x84130fff]
pci 0000:8d:02.0: supports D1 D2
pci 0000:8d:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.0: PME# disabled
pci 0000:8d:02.1: reg 10: [mem 0x84131000-0x84131fff]
pci 0000:8d:02.1: supports D1 D2
pci 0000:8d:02.1: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.1: PME# disabled
pci 0000:8d:02.2: reg 10: [mem 0x84135000-0x841350ff]
pci 0000:8d:02.2: supports D1 D2
pci 0000:8d:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.2: PME# disabled
pci 0000:8d:03.0: reg 10: [mem 0x80000000-0x83ffffff pref]
pci 0000:8d:03.0: reg 14: [io 0x8000-0x80ff]
pci 0000:8d:03.0: reg 18: [mem 0x84120000-0x8412ffff]
pci 0000:8d:03.0: reg 30: [mem 0x84100000-0x8411ffff pref]
pci 0000:8d:03.0: supports D1 D2
pci 0000:8c:01.0: PCI bridge to [bus 8d-8d]
pci 0000:8c:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:8c:01.0: bridge window [mem 0x80000000-0x841fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0000:a9)
pci_root HWP0002:06: host bridge window [io 0xa000-0xbfff]
pci_root HWP0002:06: host bridge window [mem 0xf5000000000-0xf507edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0000:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0000:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0000:c6)
pci_root HWP0002:07: host bridge window [io 0xc000-0xdfff]
pci_root HWP0002:07: host bridge window [mem 0xf6000000000-0xf607edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0000:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0000:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0000:e3)
pci_root HWP0002:08: host bridge window [io 0xe000-0xffff]
pci_root HWP0002:08: host bridge window [mem 0xf7000000000-0xf707edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0000:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0000:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L014._PRT]
ACPI: PCI Root Bridge [L000] (0001:00)
pci_root HWP0002:09: host bridge window [io 0x1000000-0x1000fff] (PCI address [0x0-0xfff])
pci_root HWP0002:09: host bridge window [mem 0xf0100000000-0xf017edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0001:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0001:00:01.0: PME# supported from D3hot
pci 0001:00:01.0: PME# disabled
pci 0001:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0001:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0001:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0001:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0001:00:02.0: supports D1 D2
pci 0001:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0001:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0001:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0001:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0001:00:02.1: supports D1 D2
pci 0001:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0001:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0001:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0001:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0001:00:03.0: supports D1 D2
pci 0001:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0001:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0001:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0001:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0001:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0001:1c)
pci_root HWP0002:0a: host bridge window [io 0x1001000-0x1001fff] (PCI address [0x1000-0x1fff])
pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:1d:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:1d:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:1d:04.0: reg 20: [io 0x1000-0x103f]
pci 0001:1d:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:1d:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:1d:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:1d:04.1: reg 20: [io 0x1040-0x107f]
pci 0001:1d:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:1d:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:1d:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:1d:06.0: reg 20: [io 0x1080-0x10bf]
pci 0001:1d:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:1d:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:1d:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:1d:06.1: reg 20: [io 0x10c0-0x10ff]
pci 0001:1d:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:1c:01.0: PCI bridge to [bus 1d-1d]
pci 0001:1c:01.0: bridge window [io 0x1000-0x1fff]
pci 0001:1c:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0001:38)
pci_root HWP0002:0b: host bridge window [io 0x1002000-0x1003fff] (PCI address [0x2000-0x3fff])
pci_root HWP0002:0b: host bridge window [mem 0xf1100000000-0xf117edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:39:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:39:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:39:04.0: reg 20: [io 0x2000-0x203f]
pci 0001:39:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:39:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:39:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:39:04.1: reg 20: [io 0x2040-0x207f]
pci 0001:39:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:39:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:39:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:39:06.0: reg 20: [io 0x2080-0x20bf]
pci 0001:39:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:39:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:39:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:39:06.1: reg 20: [io 0x20c0-0x20ff]
pci 0001:39:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:38:01.0: PCI bridge to [bus 39-39]
pci 0001:38:01.0: bridge window [io 0x2000-0x2fff]
pci 0001:38:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0001:54)
pci_root HWP0002:0c: host bridge window [io 0x1004000-0x1005fff] (PCI address [0x4000-0x5fff])
pci_root HWP0002:0c: host bridge window [mem 0xf2100000000-0xf217edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0001:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0001:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0001:70)
pci_root HWP0002:0d: host bridge window [io 0x1006000-0x1007fff] (PCI address [0x6000-0x7fff])
pci_root HWP0002:0d: host bridge window [mem 0xf3100000000-0xf317edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0001:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0001:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0001:8c)
pci_root HWP0002:0e: host bridge window [io 0x1008000-0x1009fff] (PCI address [0x8000-0x9fff])
pci_root HWP0002:0e: host bridge window [mem 0xf4100000000-0xf417edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:8c:01.0: reg 10: [mem 0x80080000-0x8009ffff 64bit]
pci 0001:8c:01.0: reg 18: [mem 0x80040000-0x8007ffff 64bit]
pci 0001:8c:01.0: reg 20: [io 0x8000-0x803f]
pci 0001:8c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:8c:01.1: reg 10: [mem 0x800a0000-0x800bffff 64bit]
pci 0001:8c:01.1: reg 20: [io 0x8040-0x807f]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0001:a9)
pci_root HWP0002:0f: host bridge window [io 0x100a000-0x100bfff] (PCI address [0xa000-0xbfff])
pci_root HWP0002:0f: host bridge window [mem 0xf5100000000-0xf517edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0001:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0001:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0001:c6)
pci_root HWP0002:10: host bridge window [io 0x100c000-0x100dfff] (PCI address [0xc000-0xdfff])
pci_root HWP0002:10: host bridge window [mem 0xf6100000000-0xf617edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0001:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0001:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0001:e3)
pci_root HWP0002:11: host bridge window [io 0x100e000-0x100ffff] (PCI address [0xe000-0xffff])
pci_root HWP0002:11: host bridge window [mem 0xf7100000000-0xf717edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0001:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0001:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L014._PRT]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
Switching to clocksource itc
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Please use IA-32 EL for executing IA-32 binaries
HugeTLB registered 256 MB page size, pre-allocated 0 pages
msgmni has been set to 32768
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 36 (level, low) -> CPU 2 (0x0400) vector 58
e1000 0000:1c:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 58
e1000: 0000:1c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:76
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 37 (level, low) -> CPU 3 (0x0500) vector 59
e1000 0000:1c:01.1: PCI INT B -> GSI 37 (level, low) -> IRQ 59
e1000: 0000:1c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:77
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 47 (level, low) -> CPU 4 (0x0800) vector 60
e1000 0000:38:01.0: PCI INT A -> GSI 47 (level, low) -> IRQ 60
e1000: 0000:38:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:28
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 48 (level, low) -> CPU 5 (0x0900) vector 61
e1000 0000:38:01.1: PCI INT B -> GSI 48 (level, low) -> IRQ 61
e1000: 0000:38:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:29
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 58 (level, low) -> CPU 6 (0x0c00) vector 62
e1000 0000:54:01.0: PCI INT A -> GSI 58 (level, low) -> IRQ 62
e1000: 0000:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:44
e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 59 (level, low) -> CPU 7 (0x0d00) vector 63
e1000 0000:54:01.1: PCI INT B -> GSI 59 (level, low) -> IRQ 63
e1000: 0000:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:45
e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 69 (level, low) -> CPU 0 (0x0000) vector 64
e1000 0000:70:01.0: PCI INT A -> GSI 69 (level, low) -> IRQ 64
e1000: 0000:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1a
e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 70 (level, low) -> CPU 1 (0x0100) vector 65
e1000 0000:70:01.1: PCI INT B -> GSI 70 (level, low) -> IRQ 65
e1000: 0000:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1b
e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 91 (level, low) -> CPU 2 (0x0400) vector 66
e1000 0000:a9:01.0: PCI INT A -> GSI 91 (level, low) -> IRQ 66
e1000: 0000:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d6
e1000: eth8: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 92 (level, low) -> CPU 3 (0x0500) vector 67
e1000 0000:a9:01.1: PCI INT B -> GSI 92 (level, low) -> IRQ 67
e1000: 0000:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d7
e1000: eth9: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 102 (level, low) -> CPU 4 (0x0800) vector 68
e1000 0000:c6:01.0: PCI INT A -> GSI 102 (level, low) -> IRQ 68
e1000: 0000:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c2
e1000: eth10: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 103 (level, low) -> CPU 5 (0x0900) vector 69
e1000 0000:c6:01.1: PCI INT B -> GSI 103 (level, low) -> IRQ 69
e1000: 0000:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c3
e1000: eth11: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 113 (level, low) -> CPU 6 (0x0c00) vector 70
e1000 0000:e3:01.0: PCI INT A -> GSI 113 (level, low) -> IRQ 70
e1000: 0000:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c6
e1000: eth12: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 114 (level, low) -> CPU 7 (0x0d00) vector 71
e1000 0000:e3:01.1: PCI INT B -> GSI 114 (level, low) -> IRQ 71
e1000: 0000:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c7
e1000: eth13: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 144 (level, low) -> CPU 8 (0x0001) vector 72
e1000 0001:1d:04.0: PCI INT A -> GSI 144 (level, low) -> IRQ 72
e1000: 0001:1d:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:90
e1000: eth14: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 145 (level, low) -> CPU 9 (0x0101) vector 73
e1000 0001:1d:04.1: PCI INT B -> GSI 145 (level, low) -> IRQ 73
e1000: 0001:1d:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:91
e1000: eth15: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 146 (level, low) -> CPU 10 (0x0401) vector 74
e1000 0001:1d:06.0: PCI INT A -> GSI 146 (level, low) -> IRQ 74
e1000: 0001:1d:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:92
e1000: eth16: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 147 (level, low) -> CPU 11 (0x0501) vector 75
e1000 0001:1d:06.1: PCI INT B -> GSI 147 (level, low) -> IRQ 75
e1000: 0001:1d:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:93
e1000: eth17: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 155 (level, low) -> CPU 12 (0x0801) vector 76
e1000 0001:39:04.0: PCI INT A -> GSI 155 (level, low) -> IRQ 76
e1000: 0001:39:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:00
e1000: eth18: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 156 (level, low) -> CPU 13 (0x0901) vector 77
e1000 0001:39:04.1: PCI INT B -> GSI 156 (level, low) -> IRQ 77
e1000: 0001:39:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:01
e1000: eth19: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 157 (level, low) -> CPU 14 (0x0c01) vector 78
e1000 0001:39:06.0: PCI INT A -> GSI 157 (level, low) -> IRQ 78
e1000: 0001:39:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:02
e1000: eth20: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 158 (level, low) -> CPU 15 (0x0d01) vector 79
e1000 0001:39:06.1: PCI INT B -> GSI 158 (level, low) -> IRQ 79
e1000: 0001:39:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:03
e1000: eth21: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 166 (level, low) -> CPU 8 (0x0001) vector 80
e1000 0001:54:01.0: PCI INT A -> GSI 166 (level, low) -> IRQ 80
e1000: 0001:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:30
e1000: eth22: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 167 (level, low) -> CPU 9 (0x0101) vector 81
e1000 0001:54:01.1: PCI INT B -> GSI 167 (level, low) -> IRQ 81
e1000: 0001:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:31
e1000: eth23: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 177 (level, low) -> CPU 10 (0x0401) vector 82
e1000 0001:70:01.0: PCI INT A -> GSI 177 (level, low) -> IRQ 82
e1000: 0001:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2c
e1000: eth24: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 178 (level, low) -> CPU 11 (0x0501) vector 83
e1000 0001:70:01.1: PCI INT B -> GSI 178 (level, low) -> IRQ 83
e1000: 0001:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2d
e1000: eth25: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 188 (level, low) -> CPU 12 (0x0801) vector 84
e1000 0001:8c:01.0: PCI INT A -> GSI 188 (level, low) -> IRQ 84
e1000: 0001:8c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7e
e1000: eth26: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 189 (level, low) -> CPU 13 (0x0901) vector 85
e1000 0001:8c:01.1: PCI INT B -> GSI 189 (level, low) -> IRQ 85
e1000: 0001:8c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7f
e1000: eth27: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 199 (level, low) -> CPU 14 (0x0c01) vector 86
e1000 0001:a9:01.0: PCI INT A -> GSI 199 (level, low) -> IRQ 86
e1000: 0001:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:58
e1000: eth28: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 200 (level, low) -> CPU 15 (0x0d01) vector 87
e1000 0001:a9:01.1: PCI INT B -> GSI 200 (level, low) -> IRQ 87
e1000: 0001:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:59
e1000: eth29: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 210 (level, low) -> CPU 8 (0x0001) vector 88
e1000 0001:c6:01.0: PCI INT A -> GSI 210 (level, low) -> IRQ 88
e1000: 0001:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:78
e1000: eth30: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 211 (level, low) -> CPU 9 (0x0101) vector 89
e1000 0001:c6:01.1: PCI INT B -> GSI 211 (level, low) -> IRQ 89
e1000: 0001:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:79
e1000: eth31: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 221 (level, low) -> CPU 10 (0x0401) vector 90
e1000 0001:e3:01.0: PCI INT A -> GSI 221 (level, low) -> IRQ 90
e1000: 0001:e3:01.0: e1000_check_options: Warning: no configuration for board #32
e1000: 0001:e3:01.0: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:00
e1000: eth32: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 222 (level, low) -> CPU 11 (0x0501) vector 91
e1000 0001:e3:01.1: PCI INT B -> GSI 222 (level, low) -> IRQ 91
e1000: 0001:e3:01.1: e1000_check_options: Warning: no configuration for board #33
e1000: 0001:e3:01.1: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:01
e1000: eth33: e1000_probe: Intel(R) PRO/1000 Network Connection
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
tg3.c:v3.105 (December 2, 2009)
GSI 29 (level, low) -> CPU 4 (0x0800) vector 92
tg3 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 92
eth34: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:b6:7b
eth34: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth34: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth34: dma_rwctrl[769c0000] dma_mask[64-bit]
GSI 137 (level, low) -> CPU 13 (0x0901) vector 93
tg3 0001:00:01.0: PCI INT A -> GSI 137 (level, low) -> IRQ 93
eth35: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:36:5f
eth35: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth35: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth35: dma_rwctrl[769c0000] dma_mask[64-bit]
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=94
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=95
sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
mptspi 0000:00:03.0: PCI INT A -> GSI 27 (level, low) -> IRQ 96
mptbase: ioc2: Initiating bringup
ioc2: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi2 : ioc2: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=96
scsi 2:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target2:0:6: Beginning Domain Validation
target2:0:6: Ending Domain Validation
target2:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 2:0:6:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 2:0:6:0: [sdb] Write Protect is off
sd 2:0:6:0: [sdb] Mode Sense: d3 00 10 08
sd 2:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdb:
GSI 28 (level, low) -> CPU 1 (0x0100) vector 97
mptspi 0000:00:03.1: PCI INT B -> GSI 28 (level, low) -> IRQ 97
mptbase: ioc3: Initiating bringup
ioc3: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi3 : ioc3: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=97
sdb1 sdb2
sd 2:0:6:0: [sdb] Attached SCSI disk
GSI 133 (level, low) -> CPU 10 (0x0401) vector 98
mptspi 0001:00:02.0: PCI INT A -> GSI 133 (level, low) -> IRQ 98
mptbase: ioc4: Initiating bringup
ioc4: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi4 : ioc4: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=98
scsi 4:0:6:0: Direct-Access HP 73.4G ST373454LC HPC2 PQ: 0 ANSI: 3
target4:0:6: Beginning Domain Validation
target4:0:6: Ending Domain Validation
target4:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 4:0:6:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:6:0: [sdc] Write Protect is off
sd 4:0:6:0: [sdc] Mode Sense: d3 00 10 08
sd 4:0:6:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdc:
GSI 134 (level, low) -> CPU 11 (0x0501) vector 99
mptspi 0001:00:02.1: PCI INT B -> GSI 134 (level, low) -> IRQ 99
mptbase: ioc5: Initiating bringup
ioc5: LSI53C1030 C0: Capabilities={Initiator,Target}
sdc1 sdc2
scsi5 : ioc5: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=99
sd 4:0:6:0: [sdc] Attached SCSI disk
scsi 5:0:2:0: CD-ROM _NEC DVD+RW ND-2100AD 1.28 PQ: 0 ANSI: 2
target5:0:2: Beginning Domain Validation
target5:0:2: Domain Validation skipping write tests
target5:0:2: Ending Domain Validation
target5:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 135 (level, low) -> CPU 12 (0x0801) vector 100
mptspi 0001:00:03.0: PCI INT A -> GSI 135 (level, low) -> IRQ 100
mptbase: ioc6: Initiating bringup
ioc6: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi6 : ioc6: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=100
scsi 6:0:6:0: Direct-Access HP 73.4G ST373454LC HPC3 PQ: 0 ANSI: 3
target6:0:6: Beginning Domain Validation
target6:0:6: Ending Domain Validation
target6:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 6:0:6:0: [sdd] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 6:0:6:0: [sdd] Write Protect is off
sd 6:0:6:0: [sdd] Mode Sense: d3 00 10 08
sd 6:0:6:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdd:
GSI 136 (level, low) -> CPU 13 (0x0901) vector 101
mptspi 0001:00:03.1: PCI INT B -> GSI 136 (level, low) -> IRQ 101
mptbase: ioc7: Initiating bringup
ioc7: LSI53C1030 C0: Capabilities={Initiator,Target}
sdd1 sdd2
scsi7 : ioc7: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=101
sd 6:0:6:0: [sdd] Attached SCSI disk
Fusion MPT SAS Host driver 3.04.13
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
udev: renamed network interface eth10 to eth11
udev: renamed network interface eth20 to eth22
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
GSI 80 (level, low) -> CPU 6 (0x0c00) vector 102
ehci_hcd 0000:8d:02.2: PCI INT C -> GSI 80 (level, low) -> IRQ 102
ehci_hcd 0000:8d:02.2: EHCI Host Controller
ehci_hcd 0000:8d:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:8d:02.2: irq 102, io mem 0xf4004135000
ehci_hcd 0000:8d:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
GSI 82 (level, low) -> CPU 7 (0x0d00) vector 103
ohci_hcd 0000:8d:02.0: PCI INT A -> GSI 82 (level, low) -> IRQ 103
ohci_hcd 0000:8d:02.0: OHCI Host Controller
ohci_hcd 0000:8d:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:8d:02.0: irq 103, io mem 0xf4004130000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 83 (level, low) -> CPU 0 (0x0000) vector 104
ohci_hcd 0000:8d:02.1: PCI INT B -> GSI 83 (level, low) -> IRQ 104
ohci_hcd 0000:8d:02.1: OHCI Host Controller
ohci_hcd 0000:8d:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:8d:02.1: irq 104, io mem 0xf4004131000
udev: renamed network interface eth30 to eth32
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
udev: renamed network interface eth34 to eth0
udev: renamed network interface eth31 to eth33
udev: renamed network interface eth35 to eth15
udev: renamed network interface eth4 to eth5
udev: renamed network interface eth9 to eth10
udev: renamed network interface eth1_rename to eth2
udev: renamed network interface eth0_rename to eth1
udev: renamed network interface eth11_rename to eth12
udev: renamed network interface eth12_rename to eth13
udev: renamed network interface eth13_rename to eth14
udev: renamed network interface eth14_rename to eth16
udev: renamed network interface eth17_rename to eth19
udev: renamed network interface eth18_rename to eth20
udev: renamed network interface eth15_rename to eth17
udev: renamed network interface eth16_rename to eth18
udev: renamed network interface eth19_rename to eth21
usb 2-1: new full speed USB device using ohci_hcd and address 2
udev: renamed network interface eth2_rename to eth3
udev: renamed network interface eth21_rename to eth23
udev: renamed network interface eth22_rename to eth24
udev: renamed network interface eth23_rename to eth25
udev: renamed network interface eth24_rename to eth26
udev: renamed network interface eth28_rename to eth30
udev: renamed network interface eth25_rename to eth27
udev: renamed network interface eth26_rename to eth28
udev: renamed network interface eth27_rename to eth29
udev: renamed network interface eth29_rename to eth31
udev: renamed network interface eth3_rename to eth4
input: HP Virtual Management Device as /class/input/input0
generic-usb 0003:03F0:1126.0001: input: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:8d:02.0-1/input0
input: HP Virtual Management Device as /class/input/input1
generic-usb 0003:03F0:1126.0002: input: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:8d:02.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
udev: renamed network interface eth32_rename to eth34
udev: renamed network interface eth33_rename to eth35
udev: renamed network interface eth8_rename to eth9
udev: renamed network interface eth5_rename to eth6
udev: renamed network interface eth6_rename to eth7
udev: renamed network interface eth7_rename to eth8
preping 05-blogd.sh
running 05-blogd.sh
Boot logging started on /dev/ttyS0(/dev/console) at Tue Jan 19 22:22:27 2010
preping 11-block.sh
running 11-block.sh
preping 11-usb.sh
running 11-usb.sh
preping 21-devinit_done.sh
running 21-devinit_done.sh
preping 81-mount.sh
running 81-mount.sh
Waiting for device /dev/disk/by-id/scsi-35001d38000048bd8-part2 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/scsi-35001d38000048bd8-part2
/dev/disk/by-id/scsi-35001d38000048bd8-part2: clean, 208025/4448256 files, 3299103/17789968 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
kernel BUG at mm/slub.c:2839!
modprobe[6155]: bugcheck! 0 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6155, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000289 ip : [<a0000001001ae800>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kfree+0xe0/0x260
unat: 0000000000000000 pfs : 0000000000000289 rsc : 0000000000000003
rnat: e000070607721720 bsps: aa99aaa6aa595999 pr : aa99aaa6aa565959
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ae800 b6 : a0000001005e4360 b7 : a00000010046de40
f6 : 1003e0000000cb700a034 f7 : 1003e0000000000000190
f8 : 1003e0000000cb7009ea4 f9 : 1003e0000000000000001
f10 : 0fffefffffffffa0a1f00 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 0000000000001816 r3 : 000000000000fffe
r8 : 0000000000000021 r9 : 000000000000ffff r10 : ffffffffffff40a1
r11 : 0000000000000000 r12 : e00007060772fdf0 r13 : e000070607720000
r14 : 0000000000001816 r15 : 0000000000004000 r16 : a00000010119c62c
r17 : a000000101265d70 r18 : 0000000000000009 r19 : a0000001005e4360
r20 : a0000001018edb38 r21 : 000000000000bf41 r22 : 00000000000fffff
r23 : 0000000000100000 r24 : a000000102a3ddc8 r25 : a000000100a0dca8
r26 : a00000010046de40 r27 : a000000102a3ddc8 r28 : a000000102a3dec0
r29 : a000000100a0dc98 r30 : a00000010046dd80 r31 : a000000102a3ddc0
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp=e00007060772f9c0 bsp=e000070607721368
[<a0000001000171c0>] show_regs+0x820/0x860
sp=e00007060772fb90 bsp=e000070607721310
[<a00000010003bc40>] die+0x1a0/0x300
sp=e00007060772fb90 bsp=e0000706077212d0
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
sp=e00007060772fb90 bsp=e0000706077212a0
[<a00000010003d460>] ia64_bad_break+0x220/0x440
sp=e00007060772fb90 bsp=e000070607721278
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e00007060772fc20 bsp=e000070607721278
[<a0000001001ae800>] kfree+0xe0/0x260
sp=e00007060772fdf0 bsp=e000070607721230
[<a000000207dd1df0>] sr_probe+0xad0/0xf20 [sr_mod]
sp=e00007060772fdf0 bsp=e0000706077211c8
[<a00000010048ab40>] driver_probe_device+0x180/0x300
sp=e00007060772fe20 bsp=e000070607721190
[<a00000010048ada0>] __driver_attach+0xe0/0x140
sp=e00007060772fe20 bsp=e000070607721160
[<a0000001004897a0>] bus_for_each_dev+0xa0/0x140
sp=e00007060772fe20 bsp=e000070607721128
[<a00000010048a760>] driver_attach+0x40/0x60
sp=e00007060772fe30 bsp=e000070607721108
[<a0000001004885c0>] bus_add_driver+0x180/0x520
sp=e00007060772fe30 bsp=e0000706077210c0
[<a00000010048b560>] driver_register+0x260/0x400
sp=e00007060772fe30 bsp=e000070607721078
[<a0000001004df540>] scsi_register_driver+0x40/0x60
sp=e00007060772fe30 bsp=e000070607721058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e00007060772fe30 bsp=e000070607721038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e00007060772fe30 bsp=e000070607720ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp=e00007060772fe30 bsp=e000070607720f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e00007060772fe30 bsp=e000070607720f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e000070607730000 bsp=e000070607720f78
Disabling lock debugging due to kernel taint
udevd-event[6154]: '/sbin/modprobe' abnormal exit
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 2104384k swap on /dev/sda2. Priority:-1 extents:1 across:2104done
Setting up the hardware clock done
Activating device mapper...
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
udev on /dev type tmpfs (rw)
loop: module loaded
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sdb1 on /boot/efi type vfat (rw) done
Activating remaining swap-devices in /etc/fstab... done
Loading fuse module done
Retry device configuration: done
Setting current sysctl status from /etc/sysctl.conf done
Starting ia32el done
Enabling syn flood protection done
Disabling IP forwarding done
done
Turning quota on
quotaoff: Warning: No quota format detected in the kernel.
Checking quotas. This may take some time.
quotaon: Warning: No quota format detected in the kernel.
done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Setting up hostname 'linux-4zax' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
Loading kdump
Invalid kernel image: /boot/vmlinuz-2.6.33-rc3-next-20100111-dirty
skipped
System Boot Control: The system has been set up
Skipped features: boot.cycle boot.kdump
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 3
Boot logging started on /dev/ttyS0(/dev/console) at Tue Jan 19 15:25:36 2010
Master Resource Control: previous runlevel: N, switching to runlevel:3
acpid: starting up
Initializing random number generator done
acpid: 2 rules loaded
Starting acpid done
Starting salinfo daemon done
Starting D-Bus daemon done
Starting syslog services done
tg3 0000:00:01.0: firmware: using built-in firmware tigon/tg3_tso.bin
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemon done
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 10)
eth0 Starting DHCP4 client. . .
eth0 IP address: 10.206.5.23/16 done
eth1 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth1 unused
eth10 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth10 unused
eth11 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth11 unused
eth12 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth12 unused
eth13 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth13 unused
eth14 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth14 unused
eth15 device: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 10)
No configuration found for eth15 unused
eth16 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth16 unused
eth17 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth17 unused
eth18 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth18 unused
eth19 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth19 unused
eth2 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth2 unused
eth20 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth20 unused
eth21 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth21 unused
eth22 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth22 unused
eth23 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth23 unused
eth24 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth24 unused
eth25 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth25 unused
eth26 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth26 unused
eth27 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth27 unused
eth28 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth28 unused
eth29 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth29 unused
eth3 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth3 unused
eth30 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth30 unused
eth31 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth31 unused
eth32 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth32 unused
eth33 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth33 unused
eth34 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth34 unused
eth35 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth35 unused
eth4 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth4 unused
eth5 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth5 unused
eth6 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth6 unused
eth7 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth7 unused
eth8 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth8 unused
eth9 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth9 unused
Setting up service (localfs) network . . . . . . . . . . done
Starting rpcbind done
Not starting NFS client services - no NFS found in /etc/fstab: unused
Mount CIFS File Systems unused
Loading console font lat9w-16.psfu -m trivial G0:loadable done
Loading keymap assuming iso-8859-15 euro
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-20 22:46 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-20 22:46 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
>
> Could you boot with full debugging?
>
> Either switch on
>
> CONFIG_SLUB_DEBUG_ON
>
> or pass
>
> slub_debug
>
> on the kernel command line.
>
coffee0:/usr/src/linux-2.6 # grep SLUB .config
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
boot log below.
ELILO boot: achiang slub_debug
Uncompressing Linux... done
Loading file initrd-2.6.33-rc3-next-20100111-dirty...done
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc3-next-20100111-dirty (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #20 SMP Tue Jan 19 12:34:56 MST 2010
EFI v2.00 by HP: SALsystab=0x707fd39c088 ACPI 2.0=0x707fd7d0000 HCDP=0x707fd7f6998 SMBIOS=0x1ffec000
booting generic kernel on platform hpzx1
PCDP: v3 at 0x707fd7f6998
Early serial console at MMIO 0xffc30064000 (options '9600n8')
bootconsole [uart8250] enabled
ACPI: RSDP 00000707fd7d0000 00024 (v02 HP)
ACPI: XSDT 00000707fd7f6a80 0007C (v01 HP rx8640 00000000 HP 00000000)
ACPI: FACP 00000707fd7f65b0 000F4 (v03 HP rx8640 00000000 HP 00000000)
ACPI Warning: 32/64X length mismatch in Pm1aEventBlock: 32/16 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 256/0 (20091214/tbfadt-526)
ACPI Warning: Invalid length for Pm1aEventBlock: 16, using default 32 (20091214/tbfadt-607)
ACPI: DSDT 00000707fd7d03d0 2618B (v02 HP CELL000 00000000 HP 00000000)
ACPI: FACS 00000707fd7d0028 00040
ACPI: SPCR 00000707fd7d0068 00050 (v01 HP rx8640 00000000 HP 00000000)
ACPI: DBGP 00000707fd7d00b8 00034 (v01 HP rx8640 00000000 HP 00000000)
ACPI: APIC 00000707fd7d01a0 0022C (v01 HP rx8640 00000000 HP 00000000)
ACPI: SLIT 00000707fd7f66a8 00045 (v01 HP rx8640 00000000 HP 00000000)
ACPI: CPEP 00000707fd7f66f0 000AC (v01 HP rx8640 00000000 HP 00000000)
ACPI: SRAT 00000707fd7f67a0 001F8 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SPMI 00000707fd7f6560 00050 (v04 HP rx8640 00000000 HP 00000000)
ACPI: OEMD 00000707fd7d0128 00074 (v01 HP rx8640 00000000 HP 00000000)
ACPI: HPET 00000707fd7d00f0 00038 (v01 HP rx8640 00000000 HP 00000000)
ACPI: SSDT 00000707fd7f6b78 25088 (v02 HP CELL001 00000000 HP 00000000)
ACPI: Local APIC address c0000000fee00000
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c7000 (6057711 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc3-next-20100111-dirty root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug slub_debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10805k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
Console: colour dummy device 80x25
Calibrating delay loop... 3194.88 BogoMIPS (lpjc89760)
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Mount-cache hash table entries: 4096
ACPI: Core revision 20091214
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 141 cycles)
CPU 1: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 146 cycles)
CPU 2: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 146 cycles)
CPU 3: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 4: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 5: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 337 cycles)
CPU 5: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 6: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 337 cycles)
CPU 6: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 7: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 337 cycles)
CPU 7: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 8: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 652 cycles)
CPU 8: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 9: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 652 cycles)
CPU 9: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 10: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 652 cycles)
CPU 10: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 656 cycles)
CPU 11: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 12: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 656 cycles)
CPU 12: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 13: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 652 cycles)
CPU 13: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 14: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 655 cycles)
CPU 14: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 654 cycles)
CPU 15: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
Brought up 16 CPUs
Total of 16 processors activated (51118.08 BogoMIPS).
DMI 2.5 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOSAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [L000] (0000:00)
pci_root HWP0002:00: host bridge window [io 0x0000-0x0fff]
pci_root HWP0002:00: host bridge window [mem 0xf0000000000-0xf007edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0000:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0000:00:01.0: PME# supported from D3hot
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0000:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0000:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0000:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0000:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0000:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0000:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0000:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0000:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0000:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0000:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0000:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0000:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0000:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0000:1c)
pci_root HWP0002:01: host bridge window [io 0x1000-0x1fff]
pci_root HWP0002:01: host bridge window [mem 0xf0080000000-0xf00fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:1c:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:1c:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:1c:01.0: reg 20: [io 0x1000-0x103f]
pci 0000:1c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:1c:01.0: PME# supported from D0 D3hot
pci 0000:1c:01.0: PME# disabled
pci 0000:1c:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:1c:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:1c:01.1: reg 20: [io 0x1040-0x107f]
pci 0000:1c:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0000:1c:01.1: PME# supported from D0 D3hot
pci 0000:1c:01.1: PME# disabled
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0000:38)
pci_root HWP0002:02: host bridge window [io 0x2000-0x3fff]
pci_root HWP0002:02: host bridge window [mem 0xf1000000000-0xf107edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:38:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:38:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:38:01.0: reg 20: [io 0x2000-0x203f]
pci 0000:38:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:38:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:38:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:38:01.1: reg 20: [io 0x2040-0x207f]
pci 0000:38:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0000:54)
pci_root HWP0002:03: host bridge window [io 0x4000-0x5fff]
pci_root HWP0002:03: host bridge window [mem 0xf2000000000-0xf207edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0000:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0000:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0000:70)
pci_root HWP0002:04: host bridge window [io 0x6000-0x7fff]
pci_root HWP0002:04: host bridge window [mem 0xf3000000000-0xf307edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0000:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0000:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0000:8c)
pci_root HWP0002:05: host bridge window [io 0x8000-0x9fff]
pci_root HWP0002:05: host bridge window [mem 0xf4000000000-0xf407edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:8d:01.0: reg 14: [mem 0x84132000-0x84132fff 64bit]
pci 0000:8d:01.0: reg 20: [mem 0x84133000-0x84133fff 64bit]
pci 0000:8d:01.1: reg 14: [mem 0x84134000-0x84134fff 64bit]
pci 0000:8d:01.1: reg 1c: [mem 0x84000000-0x840fffff 64bit pref]
pci 0000:8d:02.0: reg 10: [mem 0x84130000-0x84130fff]
pci 0000:8d:02.0: supports D1 D2
pci 0000:8d:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.0: PME# disabled
pci 0000:8d:02.1: reg 10: [mem 0x84131000-0x84131fff]
pci 0000:8d:02.1: supports D1 D2
pci 0000:8d:02.1: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.1: PME# disabled
pci 0000:8d:02.2: reg 10: [mem 0x84135000-0x841350ff]
pci 0000:8d:02.2: supports D1 D2
pci 0000:8d:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:8d:02.2: PME# disabled
pci 0000:8d:03.0: reg 10: [mem 0x80000000-0x83ffffff pref]
pci 0000:8d:03.0: reg 14: [io 0x8000-0x80ff]
pci 0000:8d:03.0: reg 18: [mem 0x84120000-0x8412ffff]
pci 0000:8d:03.0: reg 30: [mem 0x84100000-0x8411ffff pref]
pci 0000:8d:03.0: supports D1 D2
pci 0000:8c:01.0: PCI bridge to [bus 8d-8d]
pci 0000:8c:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:8c:01.0: bridge window [mem 0x80000000-0x841fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0000:a9)
pci_root HWP0002:06: host bridge window [io 0xa000-0xbfff]
pci_root HWP0002:06: host bridge window [mem 0xf5000000000-0xf507edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0000:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0000:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0000:c6)
pci_root HWP0002:07: host bridge window [io 0xc000-0xdfff]
pci_root HWP0002:07: host bridge window [mem 0xf6000000000-0xf607edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0000:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0000:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0000:e3)
pci_root HWP0002:08: host bridge window [io 0xe000-0xffff]
pci_root HWP0002:08: host bridge window [mem 0xf7000000000-0xf707edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0000:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0000:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0000:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0000:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0000:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0000:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0000:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0000:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N000.S000.IOC1.L014._PRT]
ACPI: PCI Root Bridge [L000] (0001:00)
pci_root HWP0002:09: host bridge window [io 0x1000000-0x1000fff] (PCI address [0x0-0xfff])
pci_root HWP0002:09: host bridge window [mem 0xf0100000000-0xf017edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:00:01.0: reg 10: [mem 0x80520000-0x8052ffff 64bit]
pci 0001:00:01.0: reg 30: [mem 0x80400000-0x8041ffff pref]
pci 0001:00:01.0: PME# supported from D3hot
pci 0001:00:01.0: PME# disabled
pci 0001:00:02.0: reg 10: [io 0x0800-0x08ff]
pci 0001:00:02.0: reg 14: [mem 0x80420000-0x8043ffff 64bit]
pci 0001:00:02.0: reg 1c: [mem 0x80440000-0x8045ffff 64bit]
pci 0001:00:02.0: reg 30: [mem 0x80000000-0x800fffff pref]
pci 0001:00:02.0: supports D1 D2
pci 0001:00:02.1: reg 10: [io 0x0900-0x09ff]
pci 0001:00:02.1: reg 14: [mem 0x80460000-0x8047ffff 64bit]
pci 0001:00:02.1: reg 1c: [mem 0x80480000-0x8049ffff 64bit]
pci 0001:00:02.1: reg 30: [mem 0x80100000-0x801fffff pref]
pci 0001:00:02.1: supports D1 D2
pci 0001:00:03.0: reg 10: [io 0x0a00-0x0aff]
pci 0001:00:03.0: reg 14: [mem 0x804a0000-0x804bffff 64bit]
pci 0001:00:03.0: reg 1c: [mem 0x804c0000-0x804dffff 64bit]
pci 0001:00:03.0: reg 30: [mem 0x80200000-0x802fffff pref]
pci 0001:00:03.0: supports D1 D2
pci 0001:00:03.1: reg 10: [io 0x0b00-0x0bff]
pci 0001:00:03.1: reg 14: [mem 0x804e0000-0x804fffff 64bit]
pci 0001:00:03.1: reg 1c: [mem 0x80500000-0x8051ffff 64bit]
pci 0001:00:03.1: reg 30: [mem 0x80300000-0x803fffff pref]
pci 0001:00:03.1: supports D1 D2
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L000._PRT]
ACPI: PCI Root Bridge [L001] (0001:1c)
pci_root HWP0002:0a: host bridge window [io 0x1001000-0x1001fff] (PCI address [0x1000-0x1fff])
pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:1d:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:1d:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:1d:04.0: reg 20: [io 0x1000-0x103f]
pci 0001:1d:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:1d:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:1d:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:1d:04.1: reg 20: [io 0x1040-0x107f]
pci 0001:1d:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:1d:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:1d:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:1d:06.0: reg 20: [io 0x1080-0x10bf]
pci 0001:1d:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:1d:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:1d:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:1d:06.1: reg 20: [io 0x10c0-0x10ff]
pci 0001:1d:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:1c:01.0: PCI bridge to [bus 1d-1d]
pci 0001:1c:01.0: bridge window [io 0x1000-0x1fff]
pci 0001:1c:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L001._PRT]
ACPI: PCI Root Bridge [L002] (0001:38)
pci_root HWP0002:0b: host bridge window [io 0x1002000-0x1003fff] (PCI address [0x2000-0x3fff])
pci_root HWP0002:0b: host bridge window [mem 0xf1100000000-0xf117edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:39:04.0: reg 10: [mem 0x80200000-0x8021ffff 64bit]
pci 0001:39:04.0: reg 18: [mem 0x80100000-0x8013ffff 64bit]
pci 0001:39:04.0: reg 20: [io 0x2000-0x203f]
pci 0001:39:04.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:39:04.1: reg 10: [mem 0x80220000-0x8023ffff 64bit]
pci 0001:39:04.1: reg 18: [mem 0x80140000-0x8017ffff 64bit]
pci 0001:39:04.1: reg 20: [io 0x2040-0x207f]
pci 0001:39:04.1: reg 30: [mem 0x80040000-0x8007ffff pref]
pci 0001:39:06.0: reg 10: [mem 0x80240000-0x8025ffff 64bit]
pci 0001:39:06.0: reg 18: [mem 0x80180000-0x801bffff 64bit]
pci 0001:39:06.0: reg 20: [io 0x2080-0x20bf]
pci 0001:39:06.0: reg 30: [mem 0x80080000-0x800bffff pref]
pci 0001:39:06.1: reg 10: [mem 0x80260000-0x8027ffff 64bit]
pci 0001:39:06.1: reg 18: [mem 0x801c0000-0x801fffff 64bit]
pci 0001:39:06.1: reg 20: [io 0x20c0-0x20ff]
pci 0001:39:06.1: reg 30: [mem 0x800c0000-0x800fffff pref]
pci 0001:38:01.0: PCI bridge to [bus 39-39]
pci 0001:38:01.0: bridge window [io 0x2000-0x2fff]
pci 0001:38:01.0: bridge window [mem 0x80000000-0x802fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L002._PRT]
ACPI: PCI Root Bridge [L004] (0001:54)
pci_root HWP0002:0c: host bridge window [io 0x1004000-0x1005fff] (PCI address [0x4000-0x5fff])
pci_root HWP0002:0c: host bridge window [mem 0xf2100000000-0xf217edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:54:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:54:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:54:01.0: reg 20: [io 0x4000-0x403f]
pci 0001:54:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:54:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:54:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:54:01.1: reg 20: [io 0x4040-0x407f]
pci 0001:54:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L004._PRT]
ACPI: PCI Root Bridge [L006] (0001:70)
pci_root HWP0002:0d: host bridge window [io 0x1006000-0x1007fff] (PCI address [0x6000-0x7fff])
pci_root HWP0002:0d: host bridge window [mem 0xf3100000000-0xf317edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:70:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:70:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:70:01.0: reg 20: [io 0x6000-0x603f]
pci 0001:70:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:70:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:70:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:70:01.1: reg 20: [io 0x6040-0x607f]
pci 0001:70:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC0.L006._PRT]
ACPI: PCI Root Bridge [L008] (0001:8c)
pci_root HWP0002:0e: host bridge window [io 0x1008000-0x1009fff] (PCI address [0x8000-0x9fff])
pci_root HWP0002:0e: host bridge window [mem 0xf4100000000-0xf417edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:8c:01.0: reg 10: [mem 0x80080000-0x8009ffff 64bit]
pci 0001:8c:01.0: reg 18: [mem 0x80040000-0x8007ffff 64bit]
pci 0001:8c:01.0: reg 20: [io 0x8000-0x803f]
pci 0001:8c:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:8c:01.1: reg 10: [mem 0x800a0000-0x800bffff 64bit]
pci 0001:8c:01.1: reg 20: [io 0x8040-0x807f]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L008._PRT]
ACPI: PCI Root Bridge [L010] (0001:a9)
pci_root HWP0002:0f: host bridge window [io 0x100a000-0x100bfff] (PCI address [0xa000-0xbfff])
pci_root HWP0002:0f: host bridge window [mem 0xf5100000000-0xf517edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:a9:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:a9:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:a9:01.0: reg 20: [io 0xa000-0xa03f]
pci 0001:a9:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:a9:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:a9:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:a9:01.1: reg 20: [io 0xa040-0xa07f]
pci 0001:a9:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L010._PRT]
ACPI: PCI Root Bridge [L012] (0001:c6)
pci_root HWP0002:10: host bridge window [io 0x100c000-0x100dfff] (PCI address [0xc000-0xdfff])
pci_root HWP0002:10: host bridge window [mem 0xf6100000000-0xf617edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:c6:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:c6:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:c6:01.0: reg 20: [io 0xc000-0xc03f]
pci 0001:c6:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:c6:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:c6:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:c6:01.1: reg 20: [io 0xc040-0xc07f]
pci 0001:c6:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L012._PRT]
ACPI: PCI Root Bridge [L014] (0001:e3)
pci_root HWP0002:11: host bridge window [io 0x100e000-0x100ffff] (PCI address [0xe000-0xffff])
pci_root HWP0002:11: host bridge window [mem 0xf7100000000-0xf717edfffff] (PCI address [0x80000000-0xfedfffff])
pci 0001:e3:01.0: reg 10: [mem 0x80100000-0x8011ffff 64bit]
pci 0001:e3:01.0: reg 18: [mem 0x80080000-0x800bffff 64bit]
pci 0001:e3:01.0: reg 20: [io 0xe000-0xe03f]
pci 0001:e3:01.0: reg 30: [mem 0x80000000-0x8003ffff pref]
pci 0001:e3:01.1: reg 10: [mem 0x80120000-0x8013ffff 64bit]
pci 0001:e3:01.1: reg 18: [mem 0x800c0000-0x800fffff 64bit]
pci 0001:e3:01.1: reg 20: [io 0xe040-0xe07f]
pci 0001:e3:01.1: reg 30: [mem 0x80040000-0x8007ffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.N001.S016.IOC1.L014._PRT]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
Switching to clocksource itc
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Please use IA-32 EL for executing IA-32 binaries
HugeTLB registered 256 MB page size, pre-allocated 0 pages
msgmni has been set to 32768
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 36 (level, low) -> CPU 2 (0x0400) vector 58
e1000 0000:1c:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 58
e1000: 0000:1c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:76
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 37 (level, low) -> CPU 3 (0x0500) vector 59
e1000 0000:1c:01.1: PCI INT B -> GSI 37 (level, low) -> IRQ 59
e1000: 0000:1c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:15:60:04:12:77
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 47 (level, low) -> CPU 4 (0x0800) vector 60
e1000 0000:38:01.0: PCI INT A -> GSI 47 (level, low) -> IRQ 60
e1000: 0000:38:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:28
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 48 (level, low) -> CPU 5 (0x0900) vector 61
e1000 0000:38:01.1: PCI INT B -> GSI 48 (level, low) -> IRQ 61
e1000: 0000:38:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:29
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 58 (level, low) -> CPU 6 (0x0c00) vector 62
e1000 0000:54:01.0: PCI INT A -> GSI 58 (level, low) -> IRQ 62
e1000: 0000:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:44
e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 59 (level, low) -> CPU 7 (0x0d00) vector 63
e1000 0000:54:01.1: PCI INT B -> GSI 59 (level, low) -> IRQ 63
e1000: 0000:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:45
e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 69 (level, low) -> CPU 0 (0x0000) vector 64
e1000 0000:70:01.0: PCI INT A -> GSI 69 (level, low) -> IRQ 64
e1000: 0000:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1a
e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 70 (level, low) -> CPU 1 (0x0100) vector 65
e1000 0000:70:01.1: PCI INT B -> GSI 70 (level, low) -> IRQ 65
e1000: 0000:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2f:1b
e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 91 (level, low) -> CPU 2 (0x0400) vector 66
e1000 0000:a9:01.0: PCI INT A -> GSI 91 (level, low) -> IRQ 66
e1000: 0000:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d6
e1000: eth8: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 92 (level, low) -> CPU 3 (0x0500) vector 67
e1000 0000:a9:01.1: PCI INT B -> GSI 92 (level, low) -> IRQ 67
e1000: 0000:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:2b:d7
e1000: eth9: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 102 (level, low) -> CPU 4 (0x0800) vector 68
e1000 0000:c6:01.0: PCI INT A -> GSI 102 (level, low) -> IRQ 68
e1000: 0000:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c2
e1000: eth10: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 103 (level, low) -> CPU 5 (0x0900) vector 69
e1000 0000:c6:01.1: PCI INT B -> GSI 103 (level, low) -> IRQ 69
e1000: 0000:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c3
e1000: eth11: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 113 (level, low) -> CPU 6 (0x0c00) vector 70
e1000 0000:e3:01.0: PCI INT A -> GSI 113 (level, low) -> IRQ 70
e1000: 0000:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c6
e1000: eth12: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 114 (level, low) -> CPU 7 (0x0d00) vector 71
e1000 0000:e3:01.1: PCI INT B -> GSI 114 (level, low) -> IRQ 71
e1000: 0000:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:30:c7
e1000: eth13: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 144 (level, low) -> CPU 8 (0x0001) vector 72
e1000 0001:1d:04.0: PCI INT A -> GSI 144 (level, low) -> IRQ 72
e1000: 0001:1d:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:90
e1000: eth14: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 145 (level, low) -> CPU 9 (0x0101) vector 73
e1000 0001:1d:04.1: PCI INT B -> GSI 145 (level, low) -> IRQ 73
e1000: 0001:1d:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:91
e1000: eth15: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 146 (level, low) -> CPU 10 (0x0401) vector 74
e1000 0001:1d:06.0: PCI INT A -> GSI 146 (level, low) -> IRQ 74
e1000: 0001:1d:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:92
e1000: eth16: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 147 (level, low) -> CPU 11 (0x0501) vector 75
e1000 0001:1d:06.1: PCI INT B -> GSI 147 (level, low) -> IRQ 75
e1000: 0001:1d:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:42:fe:93
e1000: eth17: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 155 (level, low) -> CPU 12 (0x0801) vector 76
e1000 0001:39:04.0: PCI INT A -> GSI 155 (level, low) -> IRQ 76
e1000: 0001:39:04.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:00
e1000: eth18: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 156 (level, low) -> CPU 13 (0x0901) vector 77
e1000 0001:39:04.1: PCI INT B -> GSI 156 (level, low) -> IRQ 77
e1000: 0001:39:04.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:01
e1000: eth19: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 157 (level, low) -> CPU 14 (0x0c01) vector 78
e1000 0001:39:06.0: PCI INT A -> GSI 157 (level, low) -> IRQ 78
e1000: 0001:39:06.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:02
e1000: eth20: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 158 (level, low) -> CPU 15 (0x0d01) vector 79
e1000 0001:39:06.1: PCI INT B -> GSI 158 (level, low) -> IRQ 79
e1000: 0001:39:06.1: e1000_probe: (PCI-X:66MHz:64-bit) 00:12:79:43:ab:03
e1000: eth21: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 166 (level, low) -> CPU 8 (0x0001) vector 80
e1000 0001:54:01.0: PCI INT A -> GSI 166 (level, low) -> IRQ 80
e1000: 0001:54:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:30
e1000: eth22: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 167 (level, low) -> CPU 9 (0x0101) vector 81
e1000 0001:54:01.1: PCI INT B -> GSI 167 (level, low) -> IRQ 81
e1000: 0001:54:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:5d:32:31
e1000: eth23: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 177 (level, low) -> CPU 10 (0x0401) vector 82
e1000 0001:70:01.0: PCI INT A -> GSI 177 (level, low) -> IRQ 82
e1000: 0001:70:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2c
e1000: eth24: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 178 (level, low) -> CPU 11 (0x0501) vector 83
e1000 0001:70:01.1: PCI INT B -> GSI 178 (level, low) -> IRQ 83
e1000: 0001:70:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:59:2d
e1000: eth25: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 188 (level, low) -> CPU 12 (0x0801) vector 84
e1000 0001:8c:01.0: PCI INT A -> GSI 188 (level, low) -> IRQ 84
e1000: 0001:8c:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7e
e1000: eth26: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 189 (level, low) -> CPU 13 (0x0901) vector 85
e1000 0001:8c:01.1: PCI INT B -> GSI 189 (level, low) -> IRQ 85
e1000: 0001:8c:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:6e:10:01:7f
e1000: eth27: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 199 (level, low) -> CPU 14 (0x0c01) vector 86
e1000 0001:a9:01.0: PCI INT A -> GSI 199 (level, low) -> IRQ 86
e1000: 0001:a9:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:58
e1000: eth28: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 200 (level, low) -> CPU 15 (0x0d01) vector 87
e1000 0001:a9:01.1: PCI INT B -> GSI 200 (level, low) -> IRQ 87
e1000: 0001:a9:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:69:59
e1000: eth29: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 210 (level, low) -> CPU 8 (0x0001) vector 88
e1000 0001:c6:01.0: PCI INT A -> GSI 210 (level, low) -> IRQ 88
e1000: 0001:c6:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:78
e1000: eth30: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 211 (level, low) -> CPU 9 (0x0101) vector 89
e1000 0001:c6:01.1: PCI INT B -> GSI 211 (level, low) -> IRQ 89
e1000: 0001:c6:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:56:79
e1000: eth31: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 221 (level, low) -> CPU 10 (0x0401) vector 90
e1000 0001:e3:01.0: PCI INT A -> GSI 221 (level, low) -> IRQ 90
e1000: 0001:e3:01.0: e1000_check_options: Warning: no configuration for board #32
e1000: 0001:e3:01.0: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:00
e1000: eth32: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 222 (level, low) -> CPU 11 (0x0501) vector 91
e1000 0001:e3:01.1: PCI INT B -> GSI 222 (level, low) -> IRQ 91
e1000: 0001:e3:01.1: e1000_check_options: Warning: no configuration for board #33
e1000: 0001:e3:01.1: e1000_check_options: Using defaults for all values
e1000: 0001:e3:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:12:79:9e:b8:01
e1000: eth33: e1000_probe: Intel(R) PRO/1000 Network Connection
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
tg3.c:v3.105 (December 2, 2009)
GSI 29 (level, low) -> CPU 4 (0x0800) vector 92
tg3 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 92
eth34: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:b6:7b
eth34: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth34: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth34: dma_rwctrl[769c0000] dma_mask[64-bit]
GSI 137 (level, low) -> CPU 13 (0x0901) vector 93
tg3 0001:00:01.0: PCI INT A -> GSI 137 (level, low) -> IRQ 93
eth35: Tigon3 [partno(BCM95700A6) rev 1100] (PCIX:66MHz:64-bit) MAC address 00:1b:78:d2:36:5f
eth35: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth35: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth35: dma_rwctrl[769c0000] dma_mask[64-bit]
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ”
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ•
sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
mptspi 0000:00:03.0: PCI INT A -> GSI 27 (level, low) -> IRQ 96
mptbase: ioc2: Initiating bringup
ioc2: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi2 : ioc2: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ–
scsi 2:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target2:0:6: Beginning Domain Validation
target2:0:6: Ending Domain Validation
target2:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 2:0:6:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 2:0:6:0: [sdb] Write Protect is off
sd 2:0:6:0: [sdb] Mode Sense: d3 00 10 08
sd 2:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdb:
GSI 28 (level, low) -> CPU 1 (0x0100) vector 97
mptspi 0000:00:03.1: PCI INT B -> GSI 28 (level, low) -> IRQ 97
mptbase: ioc3: Initiating bringup
ioc3: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi3 : ioc3: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ—
sdb1 sdb2
sd 2:0:6:0: [sdb] Attached SCSI disk
GSI 133 (level, low) -> CPU 10 (0x0401) vector 98
mptspi 0001:00:02.0: PCI INT A -> GSI 133 (level, low) -> IRQ 98
mptbase: ioc4: Initiating bringup
ioc4: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi4 : ioc4: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ˜
scsi 4:0:6:0: Direct-Access HP 73.4G ST373454LC HPC2 PQ: 0 ANSI: 3
target4:0:6: Beginning Domain Validation
target4:0:6: Ending Domain Validation
target4:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 4:0:6:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:6:0: [sdc] Write Protect is off
sd 4:0:6:0: [sdc] Mode Sense: d3 00 10 08
sd 4:0:6:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdc:
GSI 134 (level, low) -> CPU 11 (0x0501) vector 99
mptspi 0001:00:02.1: PCI INT B -> GSI 134 (level, low) -> IRQ 99
mptbase: ioc5: Initiating bringup
ioc5: LSI53C1030 C0: Capabilities={Initiator,Target}
sdc1 sdc2
scsi5 : ioc5: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ™
sd 4:0:6:0: [sdc] Attached SCSI disk
scsi 5:0:2:0: CD-ROM _NEC DVD+RW ND-2100AD 1.28 PQ: 0 ANSI: 2
target5:0:2: Beginning Domain Validation
target5:0:2: Domain Validation skipping write tests
target5:0:2: Ending Domain Validation
target5:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 135 (level, low) -> CPU 12 (0x0801) vector 100
mptspi 0001:00:03.0: PCI INT A -> GSI 135 (level, low) -> IRQ 100
mptbase: ioc6: Initiating bringup
ioc6: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi6 : ioc6: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ\x100
scsi 6:0:6:0: Direct-Access HP 73.4G ST373454LC HPC3 PQ: 0 ANSI: 3
target6:0:6: Beginning Domain Validation
target6:0:6: Ending Domain Validation
target6:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 6:0:6:0: [sdd] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 6:0:6:0: [sdd] Write Protect is off
sd 6:0:6:0: [sdd] Mode Sense: d3 00 10 08
sd 6:0:6:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdd:
GSI 136 (level, low) -> CPU 13 (0x0901) vector 101
mptspi 0001:00:03.1: PCI INT B -> GSI 136 (level, low) -> IRQ 101
mptbase: ioc7: Initiating bringup
ioc7: LSI53C1030 C0: Capabilities={Initiator,Target}
sdd1 sdd2
scsi7 : ioc7: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQ\x101
sd 6:0:6:0: [sdd] Attached SCSI disk
Fusion MPT SAS Host driver 3.04.13
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
udev: renamed network interface eth10 to eth11
udev: renamed network interface eth20 to eth22
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
GSI 80 (level, low) -> CPU 6 (0x0c00) vector 102
ehci_hcd 0000:8d:02.2: PCI INT C -> GSI 80 (level, low) -> IRQ 102
ehci_hcd 0000:8d:02.2: EHCI Host Controller
ehci_hcd 0000:8d:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:8d:02.2: irq 102, io mem 0xf4004135000
ehci_hcd 0000:8d:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
GSI 82 (level, low) -> CPU 7 (0x0d00) vector 103
ohci_hcd 0000:8d:02.0: PCI INT A -> GSI 82 (level, low) -> IRQ 103
ohci_hcd 0000:8d:02.0: OHCI Host Controller
ohci_hcd 0000:8d:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:8d:02.0: irq 103, io mem 0xf4004130000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 83 (level, low) -> CPU 0 (0x0000) vector 104
ohci_hcd 0000:8d:02.1: PCI INT B -> GSI 83 (level, low) -> IRQ 104
ohci_hcd 0000:8d:02.1: OHCI Host Controller
ohci_hcd 0000:8d:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:8d:02.1: irq 104, io mem 0xf4004131000
udev: renamed network interface eth30 to eth32
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
udev: renamed network interface eth34 to eth0
udev: renamed network interface eth31 to eth33
udev: renamed network interface eth35 to eth15
udev: renamed network interface eth4 to eth5
udev: renamed network interface eth9 to eth10
udev: renamed network interface eth1_rename to eth2
udev: renamed network interface eth0_rename to eth1
udev: renamed network interface eth11_rename to eth12
udev: renamed network interface eth12_rename to eth13
udev: renamed network interface eth13_rename to eth14
udev: renamed network interface eth14_rename to eth16
udev: renamed network interface eth17_rename to eth19
udev: renamed network interface eth18_rename to eth20
udev: renamed network interface eth15_rename to eth17
udev: renamed network interface eth16_rename to eth18
udev: renamed network interface eth19_rename to eth21
usb 2-1: new full speed USB device using ohci_hcd and address 2
udev: renamed network interface eth2_rename to eth3
udev: renamed network interface eth21_rename to eth23
udev: renamed network interface eth22_rename to eth24
udev: renamed network interface eth23_rename to eth25
udev: renamed network interface eth24_rename to eth26
udev: renamed network interface eth28_rename to eth30
udev: renamed network interface eth25_rename to eth27
udev: renamed network interface eth26_rename to eth28
udev: renamed network interface eth27_rename to eth29
udev: renamed network interface eth29_rename to eth31
udev: renamed network interface eth3_rename to eth4
input: HP Virtual Management Device as /class/input/input0
generic-usb 0003:03F0:1126.0001: input: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:8d:02.0-1/input0
input: HP Virtual Management Device as /class/input/input1
generic-usb 0003:03F0:1126.0002: input: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:8d:02.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
udev: renamed network interface eth32_rename to eth34
udev: renamed network interface eth33_rename to eth35
udev: renamed network interface eth8_rename to eth9
udev: renamed network interface eth5_rename to eth6
udev: renamed network interface eth6_rename to eth7
udev: renamed network interface eth7_rename to eth8
preping 05-blogd.sh
running 05-blogd.sh
Boot logging started on /dev/ttyS0(/dev/console) at Tue Jan 19 22:22:27 2010
preping 11-block.sh
running 11-block.sh
preping 11-usb.sh
running 11-usb.sh
preping 21-devinit_done.sh
running 21-devinit_done.sh
preping 81-mount.sh
running 81-mount.sh
Waiting for device /dev/disk/by-id/scsi-35001d38000048bd8-part2 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/scsi-35001d38000048bd8-part2
/dev/disk/by-id/scsi-35001d38000048bd8-part2: clean, 208025/4448256 files, 3299103/17789968 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
kernel BUG at mm/slub.c:2839!
modprobe[6155]: bugcheck! 0 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6155, CPU 9, comm: modprobe
psr : 0000101008526010 ifs : 8000000000000289 ip : [<a0000001001ae800>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at kfree+0xe0/0x260
unat: 0000000000000000 pfs : 0000000000000289 rsc : 0000000000000003
rnat: e000070607721720 bsps: aa99aaa6aa595999 pr : aa99aaa6aa565959
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001ae800 b6 : a0000001005e4360 b7 : a00000010046de40
f6 : 1003e0000000cb700a034 f7 : 1003e0000000000000190
f8 : 1003e0000000cb7009ea4 f9 : 1003e0000000000000001
f10 : 0fffefffffffffa0a1f00 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 0000000000001816 r3 : 000000000000fffe
r8 : 0000000000000021 r9 : 000000000000ffff r10 : ffffffffffff40a1
r11 : 0000000000000000 r12 : e00007060772fdf0 r13 : e000070607720000
r14 : 0000000000001816 r15 : 0000000000004000 r16 : a00000010119c62c
r17 : a000000101265d70 r18 : 0000000000000009 r19 : a0000001005e4360
r20 : a0000001018edb38 r21 : 000000000000bf41 r22 : 00000000000fffff
r23 : 0000000000100000 r24 : a000000102a3ddc8 r25 : a000000100a0dca8
r26 : a00000010046de40 r27 : a000000102a3ddc8 r28 : a000000102a3dec0
r29 : a000000100a0dc98 r30 : a00000010046dd80 r31 : a000000102a3ddc0
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
spà0007060772f9c0 bspà00070607721368
[<a0000001000171c0>] show_regs+0x820/0x860
spà0007060772fb90 bspà00070607721310
[<a00000010003bc40>] die+0x1a0/0x300
spà0007060772fb90 bspà000706077212d0
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
spà0007060772fb90 bspà000706077212a0
[<a00000010003d460>] ia64_bad_break+0x220/0x440
spà0007060772fb90 bspà00070607721278
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
spà0007060772fc20 bspà00070607721278
[<a0000001001ae800>] kfree+0xe0/0x260
spà0007060772fdf0 bspà00070607721230
[<a000000207dd1df0>] sr_probe+0xad0/0xf20 [sr_mod]
spà0007060772fdf0 bspà000706077211c8
[<a00000010048ab40>] driver_probe_device+0x180/0x300
spà0007060772fe20 bspà00070607721190
[<a00000010048ada0>] __driver_attach+0xe0/0x140
spà0007060772fe20 bspà00070607721160
[<a0000001004897a0>] bus_for_each_dev+0xa0/0x140
spà0007060772fe20 bspà00070607721128
[<a00000010048a760>] driver_attach+0x40/0x60
spà0007060772fe30 bspà00070607721108
[<a0000001004885c0>] bus_add_driver+0x180/0x520
spà0007060772fe30 bspà000706077210c0
[<a00000010048b560>] driver_register+0x260/0x400
spà0007060772fe30 bspà00070607721078
[<a0000001004df540>] scsi_register_driver+0x40/0x60
spà0007060772fe30 bspà00070607721058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
spà0007060772fe30 bspà00070607721038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
spà0007060772fe30 bspà00070607720ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
spà0007060772fe30 bspà00070607720f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
spà0007060772fe30 bspà00070607720f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
spà00070607730000 bspà00070607720f78
Disabling lock debugging due to kernel taint
udevd-event[6154]: '/sbin/modprobe' abnormal exit
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 2104384k swap on /dev/sda2. Priority:-1 extents:1 across:2104done
Setting up the hardware clock done
Activating device mapper...
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
udev on /dev type tmpfs (rw)
loop: module loaded
devpts on /dev/pts type devpts (rw,mode\x0620,gid=5)
/dev/sdb1 on /boot/efi type vfat (rw) done
Activating remaining swap-devices in /etc/fstab... done
Loading fuse module done
Retry device configuration: done
Setting current sysctl status from /etc/sysctl.conf done
Starting ia32el done
Enabling syn flood protection done
Disabling IP forwarding done
done
Turning quota on
quotaoff: Warning: No quota format detected in the kernel.
Checking quotas. This may take some time.
quotaon: Warning: No quota format detected in the kernel.
done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Setting up hostname 'linux-4zax' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
Loading kdump
Invalid kernel image: /boot/vmlinuz-2.6.33-rc3-next-20100111-dirty
skipped
System Boot Control: The system has been set up
Skipped features: boot.cycle boot.kdump
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 3
Boot logging started on /dev/ttyS0(/dev/console) at Tue Jan 19 15:25:36 2010
Master Resource Control: previous runlevel: N, switching to runlevel:3
acpid: starting up
Initializing random number generator done
acpid: 2 rules loaded
Starting acpid done
Starting salinfo daemon done
Starting D-Bus daemon done
Starting syslog services done
tg3 0000:00:01.0: firmware: using built-in firmware tigon/tg3_tso.bin
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemon done
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 10)
eth0 Starting DHCP4 client. . .
eth0 IP address: 10.206.5.23/16 done
eth1 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth1 unused
eth10 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth10 unused
eth11 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth11 unused
eth12 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth12 unused
eth13 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth13 unused
eth14 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth14 unused
eth15 device: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 10)
No configuration found for eth15 unused
eth16 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth16 unused
eth17 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth17 unused
eth18 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth18 unused
eth19 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth19 unused
eth2 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth2 unused
eth20 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth20 unused
eth21 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth21 unused
eth22 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth22 unused
eth23 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth23 unused
eth24 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth24 unused
eth25 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth25 unused
eth26 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth26 unused
eth27 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth27 unused
eth28 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth28 unused
eth29 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth29 unused
eth3 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth3 unused
eth30 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth30 unused
eth31 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth31 unused
eth32 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth32 unused
eth33 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth33 unused
eth34 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth34 unused
eth35 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth35 unused
eth4 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth4 unused
eth5 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth5 unused
eth6 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth6 unused
eth7 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth7 unused
eth8 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth8 unused
eth9 device: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
No configuration found for eth9 unused
Setting up service (localfs) network . . . . . . . . . . done
Starting rpcbind done
Not starting NFS client services - no NFS found in /etc/fstab: unused
Mount CIFS File Systems unused
Loading console font lat9w-16.psfu -m trivial G0:loadable done
Loading keymap assuming iso-8859-15 euro
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-19 21:50 ` Christoph Lameter
@ 2010-01-21 21:47 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-21 21:47 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
Christoph sent me another debug patch off-list.
Here is another dump of dmesg. I tried to trim it a little bit
where it made sense.
ELILO boot: achiang slub_debug
Uncompressing Linux... done
Loading file initrd-2.6.33-rc3-next-20100111-dirty...done
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc3-next-20100111-dirty (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #21 SMP Thu Jan 21 13:44:31 MST 2010
[...]
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c6000 (6058234 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc3-next-20100111-dirty root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug slub_debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10804k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
Creating slab kmem_cache_node size=64 realsize=136 order=0 offset=72 flags=0
Creating slab kmalloc-96 size=96 realsize=168 order=0 offset=104 flags=0
Creating slab kmalloc-192 size=192 realsize=264 order=0 offset=200 flags=0
Creating slab kmalloc size=8 realsize=80 order=0 offset=16 flags=0
Creating slab kmalloc size=16 realsize=88 order=0 offset=24 flags=0
Creating slab kmalloc size=32 realsize=104 order=0 offset=40 flags=0
Creating slab kmalloc size=64 realsize=136 order=0 offset=72 flags=0
Creating slab kmalloc size=128 realsize=200 order=0 offset=136 flags=0
Creating slab kmalloc size=256 realsize=328 order=0 offset=264 flags=0
Creating slab kmalloc size=512 realsize=584 order=0 offset=520 flags=0
Creating slab kmalloc size=1024 realsize=1096 order=0 offset=1032 flags=0
Creating slab kmalloc size=2048 realsize=2120 order=0 offset=2056 flags=0
Creating slab kmalloc size=4096 realsize=4168 order=1 offset=4104 flags=0
Creating slab kmalloc size=8192 realsize=8264 order=2 offset=8200 flags=0
Creating slab kmalloc size=16384 realsize=16456 order=3 offset=16392 flags=0
Creating slab kmalloc size=32768 realsize=32840 order=3 offset=32776 flags=0
Creating slab kmalloc size=65536 realsize=65608 order=3 offset=65544 flags=0
Creating slab kmalloc size=131072 realsize=131144 order=3 offset=131080 flags=0
SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=400.000MHz+/-75ppm
Console: colour dummy device 80x25
Creating slab idr_layer_cache size=544 realsize=616 order=0 offset=552 flags=40000
Creating slab numa_policy size=264 realsize=336 order=0 offset=272 flags=40000
Creating slab shared_policy_node size=48 realsize=120 order=0 offset=56 flags=40000
Calibrating delay loop... 3194.88 BogoMIPS (lpj=6389760)
Creating slab pid size=80 realsize=256 order=0 offset=88 flags=42000
Creating slab anon_vma size=24 realsize=96 order=0 offset=32 flags=c0000
Creating slab cred_jar size=104 realsize=256 order=0 offset=112 flags=42000
Creating slab sighand_cache size=1576 realsize=1664 order=0 offset=1584 flags=c2000
Creating slab signal_cache size=808 realsize=896 order=0 offset=816 flags=42000
Creating slab files_cache size=768 realsize=896 order=0 offset=776 flags=42000
Creating slab fs_cache size=48 realsize=128 order=0 offset=56 flags=42000
Creating slab mm_struct size=1280 realsize=1408 order=0 offset=1288 flags=42000
Creating slab vm_area_struct size=176 realsize=248 order=0 offset=184 flags=40000
Creating slab buffer_head size=104 realsize=176 order=0 offset=112 flags=160000
Creating slab names_cache size=4096 realsize=4224 order=1 offset=4104 flags=42000
Creating slab dentry size=192 realsize=264 order=0 offset=200 flags=160000
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Creating slab inode_cache size=536 realsize=608 order=0 offset=544 flags=160000
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Creating slab filp size=184 realsize=256 order=0 offset=192 flags=42000
Creating slab mnt_cache size=232 realsize=384 order=0 offset=240 flags=42000
Mount-cache hash table entries: 4096
Creating slab sysfs_dir_cache size=80 realsize=152 order=0 offset=88 flags=0
Creating slab bdev_cache size=784 realsize=896 order=0 offset=792 flags=162000
Creating slab radix_tree_node size=552 realsize=624 order=0 offset=560 flags=60000
Creating slab sigqueue size=160 realsize=232 order=0 offset=168 flags=40000
Creating slab proc_inode_cache size=584 realsize=656 order=0 offset=592 flags=160000
ACPI: Core revision 20091214
Creating slab Acpi-Namespace size=32 realsize=104 order=0 offset=40 flags=0
Creating slab Acpi-State size=80 realsize=152 order=0 offset=88 flags=0
Creating slab Acpi-Parse size=48 realsize=120 order=0 offset=56 flags=0
Creating slab Acpi-ParseExt size=72 realsize=144 order=0 offset=80 flags=0
Creating slab Acpi-Operand size=72 realsize=144 order=0 offset=80 flags=0
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
[...]
Total of 16 processors activated (51118.08 BogoMIPS).
Creating slab shmem_inode_cache size=744 realsize=816 order=0 offset=752 flags=40000
DMI 2.5 present.
Creating slab file_lock_cache size=176 realsize=248 order=0 offset=184 flags=40000
Creating slab skbuff_head_cache size=200 realsize=384 order=0 offset=208 flags=42000
Creating slab skbuff_fclone_cache size=404 realsize=512 order=0 offset=408 flags=42000
Creating slab sock_inode_cache size=608 realsize=768 order=0 offset=616 flags=122000
NET: Registered protocol family 16
ACPI: bus type pci registered
Creating slab biovec-16 size=256 realsize=384 order=0 offset=264 flags=42000
Creating slab biovec-64 size=1024 realsize=1152 order=0 offset=1032 flags=42000
Creating slab biovec-128 size=2048 realsize=2176 order=0 offset=2056 flags=42000
Creating slab biovec-256 size=4096 realsize=4224 order=1 offset=4104 flags=42000
Creating slab bio-0 size=168 realsize=256 order=0 offset=176 flags=2000
bio: create slab <bio-0> at 0
Creating slab fsnotify_event size=112 realsize=184 order=0 offset=120 flags=40000
Creating slab fsnotify_event_holder size=24 realsize=96 order=0 offset=32 flags=40000
Creating slab blkdev_ioc size=80 realsize=152 order=0 offset=88 flags=40000
Creating slab blkdev_requests size=336 realsize=408 order=0 offset=344 flags=40000
Creating slab blkdev_queue size=2184 realsize=2256 order=0 offset=2192 flags=40000
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
[... PCI info]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
Creating slab scsi_data_buffer size=24 realsize=96 order=0 offset=32 flags=0
Creating slab sgpool-8 size=256 realsize=384 order=0 offset=264 flags=2000
Creating slab sgpool-16 size=512 realsize=640 order=0 offset=520 flags=2000
Creating slab sgpool-32 size=1024 realsize=1152 order=0 offset=1032 flags=2000
Creating slab sgpool-64 size=2048 realsize=2176 order=0 offset=2056 flags=2000
Creating slab sgpool-128 size=4096 realsize=4224 order=1 offset=4104 flags=2000
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
Switching to clocksource itc
Creating slab eventpoll_epi size=128 realsize=256 order=0 offset=136 flags=42000
Creating slab eventpoll_pwq size=72 realsize=144 order=0 offset=80 flags=40000
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
Creating slab TCP size=1440 realsize=1536 order=0 offset=1448 flags=82000
Creating slab request_sock_TCP size=96 realsize=256 order=0 offset=104 flags=2000
Creating slab tw_sock_TCP size=152 realsize=256 order=0 offset=160 flags=82000
Creating slab UDP size=712 realsize=896 order=0 offset=720 flags=82000
Creating slab RAW size=688 realsize=768 order=0 offset=696 flags=2000
NET: Registered protocol family 2
Creating slab arp_cache size=212 realsize=384 order=0 offset=216 flags=42000
Creating slab ip_dst_cache size=328 realsize=512 order=0 offset=336 flags=42000
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
Creating slab ip_fib_hash size=72 realsize=144 order=0 offset=80 flags=40000
Creating slab ip_fib_alias size=32 realsize=104 order=0 offset=40 flags=40000
Creating slab xfrm_dst_cache size=360 realsize=512 order=0 offset=368 flags=42000
Creating slab secpath_cache size=56 realsize=128 order=0 offset=64 flags=42000
Creating slab inet_peer_cache size=64 realsize=192 order=0 offset=72 flags=42000
Creating slab tcp_bind_bucket size=32 realsize=128 order=0 offset=40 flags=42000
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
Creating slab UDP-Lite size=712 realsize=896 order=0 offset=720 flags=82000
Creating slab UNIX size=672 realsize=768 order=0 offset=680 flags=2000
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Creating slab ia64_partial_page_cache size=48 realsize=120 order=0 offset=56 flags=40000
Please use IA-32 EL for executing IA-32 binaries
Creating slab uid_cache size=80 realsize=256 order=0 offset=88 flags=42000
Creating slab posix_timers_cache size=144 realsize=216 order=0 offset=152 flags=40000
Creating slab nsproxy size=48 realsize=120 order=0 offset=56 flags=40000
HugeTLB registered 256 MB page size, pre-allocated 0 pages
Creating slab fasync_cache size=24 realsize=96 order=0 offset=32 flags=40000
Creating slab dnotify_struct size=32 realsize=104 order=0 offset=40 flags=40000
Creating slab dnotify_mark size=128 realsize=200 order=0 offset=136 flags=40000
Creating slab inotify_inode_mark size=128 realsize=200 order=0 offset=136 flags=40000
Creating slab inotify_event_private_data size=32 realsize=104 order=0 offset=40 flags=40000
Creating slab fsnotify_mark size=120 realsize=192 order=0 offset=128 flags=40000
Creating slab fanotify_response_event size=32 realsize=104 order=0 offset=40 flags=40000
Creating slab kiocb size=200 realsize=384 order=0 offset=208 flags=42000
Creating slab kioctx size=320 realsize=512 order=0 offset=328 flags=42000
Creating slab ext3_xattr size=88 realsize=160 order=0 offset=96 flags=120000
Creating slab ext3_inode_cache size=768 realsize=840 order=0 offset=776 flags=120000
Creating slab ext2_xattr size=88 realsize=160 order=0 offset=96 flags=120000
Creating slab ext2_inode_cache size=744 realsize=816 order=0 offset=752 flags=120000
Creating slab revoke_record size=24 realsize=96 order=0 offset=32 flags=22000
Creating slab revoke_table size=16 realsize=88 order=0 offset=24 flags=20000
Creating slab journal_head size=112 realsize=184 order=0 offset=120 flags=20000
Creating slab journal_handle size=24 realsize=96 order=0 offset=32 flags=20000
Creating slab hugetlbfs_inode_cache size=552 realsize=624 order=0 offset=560 flags=0
Creating slab fat_cache size=32 realsize=104 order=0 offset=40 flags=120000
Creating slab fat_inode_cache size=616 realsize=688 order=0 offset=624 flags=120000
msgmni has been set to 32768
Creating slab mqueue_inode_cache size=824 realsize=896 order=0 offset=832 flags=2000
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
Creating slab cfq_queue size=272 realsize=344 order=0 offset=280 flags=0
Creating slab cfq_io_context size=136 realsize=208 order=0 offset=144 flags=0
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Creating slab sd_ext_cdb size=32 realsize=104 order=0 offset=40 flags=0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[...]
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=94
Creating slab scsi_cmd_cache size=232 realsize=384 order=0 offset=240 flags=2000
Creating slab scsi_sense_cache size=96 realsize=256 order=0 offset=104 flags=2000
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=95
sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
[...]
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
Creating slab flow_cache size=96 realsize=168 order=0 offset=104 flags=40000
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
[...]
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Creating slab kmalloc_dma-512 size=512 realsize=584 order=0 offset=520 flags=40004000
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Bad address on kfree a=e00007861f1b0000 page=a07fffffff96cde8
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp=e0000706296ffc20 bsp=e0000706296f1278
[<a0000001007d00a0>] dump_stack+0x30/0x50
sp=e0000706296ffdf0 bsp=e0000706296f1260
[<a0000001001ae8e0>] kfree+0xe0/0x260
sp=e0000706296ffdf0 bsp=e0000706296f1230
[<a000000207dd1df0>] sr_probe+0xad0/0xf20 [sr_mod]
sp=e0000706296ffdf0 bsp=e0000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp=e0000706296ffe20 bsp=e0000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp=e0000706296ffe20 bsp=e0000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp=e0000706296ffe20 bsp=e0000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp=e0000706296ffe30 bsp=e0000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp=e0000706296ffe30 bsp=e0000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp=e0000706296ffe30 bsp=e0000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp=e0000706296ffe30 bsp=e0000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e0000706296ffe30 bsp=e0000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e0000706296ffe30 bsp=e0000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp=e0000706296ffe30 bsp=e0000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e0000706296ffe30 bsp=e0000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e000070629700000 bsp=e0000706296f0f78
Uniform CD-ROM driver Revision: 3.20
sr 1:0:2:0: Attached scsi CD-ROM sr0
modprobe[6067]: NaT consumption 17179869216 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6067, CPU 9, comm: modprobe
psr : 0000101008522010 ifs : 8000000000000814 ip : [<a0000001001ac900>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at __slab_alloc+0x80/0xca0
unat: 0000000000000000 pfs : 000000000000038c rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa565699
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001af8e0 b6 : a0000001003623a0 b7 : a00000010046df40
f6 : 1003e0000000000000000 f7 : 1003e0a7c5ac471b47843
f8 : 1003e0000000000000000 f9 : 1003effffffffffffff98
f10 : 10003b7ffffffff158148 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 0000000000000009 r3 : a00000010125f6c0
r8 : a0000001010375f0 r9 : 0000000000000001 r10 : ffffffffffff6690
r11 : 00000000003fffff r12 : e0000706296ffde0 r13 : e0000706296f0000
r14 : e000078000026698 r15 : e000078000030000 r16 : a0000001011553a8
r17 : 0000000000000f3d r18 : 0000000000000800 r19 : e000078603e3d6a0
r20 : 0000000000000000 r21 : 0000000000000031 r22 : a000000101037608
r23 : 0000000afffffffb r24 : 0000000000000005 r25 : 0000000000000000
r26 : 0000000000000000 r27 : 0000000000000000 r28 : 0000000000000001
r29 : 0000000000000000 r30 : 0000000000000000 r31 : 0000000000000000
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp=e0000706296ff830 bsp=e0000706296f1430
[<a0000001000171c0>] show_regs+0x820/0x860
sp=e0000706296ffa00 bsp=e0000706296f13d0
[<a00000010003bc40>] die+0x1a0/0x300
sp=e0000706296ffa00 bsp=e0000706296f1390
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
sp=e0000706296ffa00 bsp=e0000706296f1360
[<a00000010003cfe0>] ia64_fault+0x11c0/0x1280
sp=e0000706296ffa00 bsp=e0000706296f1308
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp=e0000706296ffc10 bsp=e0000706296f1308
[<a0000001001ac900>] __slab_alloc+0x80/0xca0
sp=e0000706296ffde0 bsp=e0000706296f1268
[<a0000001001af8e0>] __kmalloc+0x1c0/0x280
sp=e0000706296ffdf0 bsp=e0000706296f1230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp=e0000706296ffdf0 bsp=e0000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp=e0000706296ffe20 bsp=e0000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp=e0000706296ffe20 bsp=e0000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp=e0000706296ffe20 bsp=e0000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp=e0000706296ffe30 bsp=e0000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp=e0000706296ffe30 bsp=e0000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp=e0000706296ffe30 bsp=e0000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp=e0000706296ffe30 bsp=e0000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp=e0000706296ffe30 bsp=e0000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp=e0000706296ffe30 bsp=e0000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp=e0000706296ffe30 bsp=e0000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp=e0000706296ffe30 bsp=e0000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp=e000070629700000 bsp=e0000706296f0f78
Disabling lock debugging due to kernel taint
udevd-event[6066]: '/sbin/modprobe' abnormal exit
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 2104384k swap on /dev/sda2. Priority:-1 extents:1 across:2104done
Setting up the hardware clock done
Activating device mapper...
Creating slab dm_io size=40 realsize=112 order=0 offset=48 flags=0
Creating slab dm_target_io size=24 realsize=96 order=0 offset=32 flags=0
Creating slab dm_rq_target_io size=376 realsize=448 order=0 offset=384 flags=0
Creating slab dm_rq_clone_bio_info size=16 realsize=88 order=0 offset=24 flags=0
Creating slab io size=64 realsize=192 order=0 offset=72 flags=0
Creating slab kcopyd_job size=384 realsize=456 order=0 offset=392 flags=0
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
[...]
Welcome to SUSE Linux Enterprise Server 11 (ia64) - Kernel 2.6.33-rc3-next-20100111-dirty (console).
coffee0 login:
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-21 21:47 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-21 21:47 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
Christoph sent me another debug patch off-list.
Here is another dump of dmesg. I tried to trim it a little bit
where it made sense.
ELILO boot: achiang slub_debug
Uncompressing Linux... done
Loading file initrd-2.6.33-rc3-next-20100111-dirty...done
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc3-next-20100111-dirty (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #21 SMP Thu Jan 21 13:44:31 MST 2010
[...]
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c6000 (6058234 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc3-next-20100111-dirty root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug slub_debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10804k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
Creating slab kmem_cache_node sized realsize\x136 order=0 offsetr flags=0
Creating slab kmalloc-96 sizeñ realsize\x168 order=0 offset\x104 flags=0
Creating slab kmalloc-192 size\x192 realsize&4 order=0 offset 0 flags=0
Creating slab kmalloc size=8 realsizeÄ order=0 offset\x16 flags=0
Creating slab kmalloc size\x16 realsizeà order=0 offset$ flags=0
Creating slab kmalloc size2 realsize\x104 order=0 offset@ flags=0
Creating slab kmalloc sized realsize\x136 order=0 offsetr flags=0
Creating slab kmalloc size\x128 realsize 0 order=0 offset\x136 flags=0
Creating slab kmalloc size%6 realsize28 order=0 offset&4 flags=0
Creating slab kmalloc sizeQ2 realsizeX4 order=0 offsetR0 flags=0
Creating slab kmalloc size\x1024 realsize\x1096 order=0 offset\x1032 flags=0
Creating slab kmalloc size 48 realsize!20 order=0 offset 56 flags=0
Creating slab kmalloc size@96 realsizeA68 order=1 offsetA04 flags=0
Creating slab kmalloc sizeÅ92 realsizeÇ64 order=2 offsetÇ00 flags=0
Creating slab kmalloc size\x16384 realsize\x16456 order=3 offset\x16392 flags=0
Creating slab kmalloc size2768 realsize2840 order=3 offset2776 flags=0
Creating slab kmalloc sizee536 realsizee608 order=3 offsete544 flags=0
Creating slab kmalloc size\x131072 realsize\x131144 order=3 offset\x131080 flags=0
SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
Console: colour dummy device 80x25
Creating slab idr_layer_cache sizeT4 realsizea6 order=0 offsetU2 flags@000
Creating slab numa_policy size&4 realsize36 order=0 offset'2 flags@000
Creating slab shared_policy_node sizeH realsize\x120 order=0 offsetV flags@000
Calibrating delay loop... 3194.88 BogoMIPS (lpjc89760)
Creating slab pid sizeÄ realsize%6 order=0 offsetà flagsB000
Creating slab anon_vma size$ realsizeñ order=0 offset2 flags¿000
Creating slab cred_jar size\x104 realsize%6 order=0 offset\x112 flagsB000
Creating slab sighand_cache size\x1576 realsize\x1664 order=0 offset\x1584 flags¬000
Creating slab signal_cache sizeÄ8 realsizeâ6 order=0 offsetÅ6 flagsB000
Creating slab files_cache sizev8 realsizeâ6 order=0 offsetw6 flagsB000
Creating slab fs_cache sizeH realsize\x128 order=0 offsetV flagsB000
Creating slab mm_struct size\x1280 realsize\x1408 order=0 offset\x1288 flagsB000
Creating slab vm_area_struct size\x176 realsize$8 order=0 offset\x184 flags@000
Creating slab buffer_head size\x104 realsize\x176 order=0 offset\x112 flags\x160000
Creating slab names_cache size@96 realsizeB24 order=1 offsetA04 flagsB000
Creating slab dentry size\x192 realsize&4 order=0 offset 0 flags\x160000
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Creating slab inode_cache sizeS6 realsize`8 order=0 offsetT4 flags\x160000
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Creating slab filp size\x184 realsize%6 order=0 offset\x192 flagsB000
Creating slab mnt_cache size#2 realsize84 order=0 offset$0 flagsB000
Mount-cache hash table entries: 4096
Creating slab sysfs_dir_cache sizeÄ realsize\x152 order=0 offsetà flags=0
Creating slab bdev_cache sizex4 realsizeâ6 order=0 offsety2 flags\x162000
Creating slab radix_tree_node sizeU2 realsizeb4 order=0 offsetV0 flags`000
Creating slab sigqueue size\x160 realsize#2 order=0 offset\x168 flags@000
Creating slab proc_inode_cache sizeX4 realsizee6 order=0 offsetY2 flags\x160000
ACPI: Core revision 20091214
Creating slab Acpi-Namespace size2 realsize\x104 order=0 offset@ flags=0
Creating slab Acpi-State sizeÄ realsize\x152 order=0 offsetà flags=0
Creating slab Acpi-Parse sizeH realsize\x120 order=0 offsetV flags=0
Creating slab Acpi-ParseExt sizer realsize\x144 order=0 offsetÄ flags=0
Creating slab Acpi-Operand sizer realsize\x144 order=0 offsetÄ flags=0
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
[...]
Total of 16 processors activated (51118.08 BogoMIPS).
Creating slab shmem_inode_cache sizet4 realsizeÅ6 order=0 offsetu2 flags@000
DMI 2.5 present.
Creating slab file_lock_cache size\x176 realsize$8 order=0 offset\x184 flags@000
Creating slab skbuff_head_cache size 0 realsize84 order=0 offset 8 flagsB000
Creating slab skbuff_fclone_cache size@4 realsizeQ2 order=0 offset@8 flagsB000
Creating slab sock_inode_cache size`8 realsizev8 order=0 offseta6 flags\x122000
NET: Registered protocol family 16
ACPI: bus type pci registered
Creating slab biovec-16 size%6 realsize84 order=0 offset&4 flagsB000
Creating slab biovec-64 size\x1024 realsize\x1152 order=0 offset\x1032 flagsB000
Creating slab biovec-128 size 48 realsize!76 order=0 offset 56 flagsB000
Creating slab biovec-256 size@96 realsizeB24 order=1 offsetA04 flagsB000
Creating slab bio-0 size\x168 realsize%6 order=0 offset\x176 flags 00
bio: create slab <bio-0> at 0
Creating slab fsnotify_event size\x112 realsize\x184 order=0 offset\x120 flags@000
Creating slab fsnotify_event_holder size$ realsizeñ order=0 offset2 flags@000
Creating slab blkdev_ioc sizeÄ realsize\x152 order=0 offsetà flags@000
Creating slab blkdev_requests size36 realsize@8 order=0 offset44 flags@000
Creating slab blkdev_queue size!84 realsize"56 order=0 offset!92 flags@000
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
[... PCI info]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
Creating slab scsi_data_buffer size$ realsizeñ order=0 offset2 flags=0
Creating slab sgpool-8 size%6 realsize84 order=0 offset&4 flags 00
Creating slab sgpool-16 sizeQ2 realsized0 order=0 offsetR0 flags 00
Creating slab sgpool-32 size\x1024 realsize\x1152 order=0 offset\x1032 flags 00
Creating slab sgpool-64 size 48 realsize!76 order=0 offset 56 flags 00
Creating slab sgpool-128 size@96 realsizeB24 order=1 offsetA04 flags 00
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
Switching to clocksource itc
Creating slab eventpoll_epi size\x128 realsize%6 order=0 offset\x136 flagsB000
Creating slab eventpoll_pwq sizer realsize\x144 order=0 offsetÄ flags@000
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
Creating slab TCP size\x1440 realsize\x1536 order=0 offset\x1448 flagsÇ000
Creating slab request_sock_TCP sizeñ realsize%6 order=0 offset\x104 flags 00
Creating slab tw_sock_TCP size\x152 realsize%6 order=0 offset\x160 flagsÇ000
Creating slab UDP sizeq2 realsizeâ6 order=0 offsetr0 flagsÇ000
Creating slab RAW sizeh8 realsizev8 order=0 offseti6 flags 00
NET: Registered protocol family 2
Creating slab arp_cache size!2 realsize84 order=0 offset!6 flagsB000
Creating slab ip_dst_cache size28 realsizeQ2 order=0 offset36 flagsB000
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
Creating slab ip_fib_hash sizer realsize\x144 order=0 offsetÄ flags@000
Creating slab ip_fib_alias size2 realsize\x104 order=0 offset@ flags@000
Creating slab xfrm_dst_cache size60 realsizeQ2 order=0 offset68 flagsB000
Creating slab secpath_cache sizeV realsize\x128 order=0 offsetd flagsB000
Creating slab inet_peer_cache sized realsize\x192 order=0 offsetr flagsB000
Creating slab tcp_bind_bucket size2 realsize\x128 order=0 offset@ flagsB000
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
Creating slab UDP-Lite sizeq2 realsizeâ6 order=0 offsetr0 flagsÇ000
Creating slab UNIX sizeg2 realsizev8 order=0 offseth0 flags 00
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Creating slab ia64_partial_page_cache sizeH realsize\x120 order=0 offsetV flags@000
Please use IA-32 EL for executing IA-32 binaries
Creating slab uid_cache sizeÄ realsize%6 order=0 offsetà flagsB000
Creating slab posix_timers_cache size\x144 realsize!6 order=0 offset\x152 flags@000
Creating slab nsproxy sizeH realsize\x120 order=0 offsetV flags@000
HugeTLB registered 256 MB page size, pre-allocated 0 pages
Creating slab fasync_cache size$ realsizeñ order=0 offset2 flags@000
Creating slab dnotify_struct size2 realsize\x104 order=0 offset@ flags@000
Creating slab dnotify_mark size\x128 realsize 0 order=0 offset\x136 flags@000
Creating slab inotify_inode_mark size\x128 realsize 0 order=0 offset\x136 flags@000
Creating slab inotify_event_private_data size2 realsize\x104 order=0 offset@ flags@000
Creating slab fsnotify_mark size\x120 realsize\x192 order=0 offset\x128 flags@000
Creating slab fanotify_response_event size2 realsize\x104 order=0 offset@ flags@000
Creating slab kiocb size 0 realsize84 order=0 offset 8 flagsB000
Creating slab kioctx size20 realsizeQ2 order=0 offset28 flagsB000
Creating slab ext3_xattr sizeà realsize\x160 order=0 offsetñ flags\x120000
Creating slab ext3_inode_cache sizev8 realsizeÑ0 order=0 offsetw6 flags\x120000
Creating slab ext2_xattr sizeà realsize\x160 order=0 offsetñ flags\x120000
Creating slab ext2_inode_cache sizet4 realsizeÅ6 order=0 offsetu2 flags\x120000
Creating slab revoke_record size$ realsizeñ order=0 offset2 flags"000
Creating slab revoke_table size\x16 realsizeà order=0 offset$ flags 000
Creating slab journal_head size\x112 realsize\x184 order=0 offset\x120 flags 000
Creating slab journal_handle size$ realsizeñ order=0 offset2 flags 000
Creating slab hugetlbfs_inode_cache sizeU2 realsizeb4 order=0 offsetV0 flags=0
Creating slab fat_cache size2 realsize\x104 order=0 offset@ flags\x120000
Creating slab fat_inode_cache sizea6 realsizeh8 order=0 offsetb4 flags\x120000
msgmni has been set to 32768
Creating slab mqueue_inode_cache sizeÇ4 realsizeâ6 order=0 offsetÉ2 flags 00
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
Creating slab cfq_queue size'2 realsize44 order=0 offset(0 flags=0
Creating slab cfq_io_context size\x136 realsize 8 order=0 offset\x144 flags=0
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Creating slab sd_ext_cdb size2 realsize\x104 order=0 offset@ flags=0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[...]
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQî
Creating slab scsi_cmd_cache size#2 realsize84 order=0 offset$0 flags 00
Creating slab scsi_sense_cache sizeñ realsize%6 order=0 offset\x104 flags 00
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQï
sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
[...]
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
Creating slab flow_cache sizeñ realsize\x168 order=0 offset\x104 flags@000
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
[...]
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Creating slab kmalloc_dma-512 sizeQ2 realsizeX4 order=0 offsetR0 flags@004000
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Bad address on kfree a‡0007861f1b0000 page†7fffffff96cde8
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp‡000706296ffc20 bsp‡000706296f1278
[<a0000001007d00a0>] dump_stack+0x30/0x50
sp‡000706296ffdf0 bsp‡000706296f1260
[<a0000001001ae8e0>] kfree+0xe0/0x260
sp‡000706296ffdf0 bsp‡000706296f1230
[<a000000207dd1df0>] sr_probe+0xad0/0xf20 [sr_mod]
sp‡000706296ffdf0 bsp‡000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp‡000706296ffe20 bsp‡000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp‡000706296ffe20 bsp‡000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp‡000706296ffe20 bsp‡000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp‡000706296ffe30 bsp‡000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp‡000706296ffe30 bsp‡000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp‡000706296ffe30 bsp‡000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp‡000706296ffe30 bsp‡000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp‡000706296ffe30 bsp‡000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp‡000706296ffe30 bsp‡000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp‡00070629700000 bsp‡000706296f0f78
Uniform CD-ROM driver Revision: 3.20
sr 1:0:2:0: Attached scsi CD-ROM sr0
modprobe[6067]: NaT consumption 17179869216 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6067, CPU 9, comm: modprobe
psr : 0000101008522010 ifs : 8000000000000814 ip : [<a0000001001ac900>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at __slab_alloc+0x80/0xca0
unat: 0000000000000000 pfs : 000000000000038c rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa565699
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001af8e0 b6 : a0000001003623a0 b7 : a00000010046df40
f6 : 1003e0000000000000000 f7 : 1003e0a7c5ac471b47843
f8 : 1003e0000000000000000 f9 : 1003effffffffffffff98
f10 : 10003b7ffffffff158148 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 0000000000000009 r3 : a00000010125f6c0
r8 : a0000001010375f0 r9 : 0000000000000001 r10 : ffffffffffff6690
r11 : 00000000003fffff r12 : e0000706296ffde0 r13 : e0000706296f0000
r14 : e000078000026698 r15 : e000078000030000 r16 : a0000001011553a8
r17 : 0000000000000f3d r18 : 0000000000000800 r19 : e000078603e3d6a0
r20 : 0000000000000000 r21 : 0000000000000031 r22 : a000000101037608
r23 : 0000000afffffffb r24 : 0000000000000005 r25 : 0000000000000000
r26 : 0000000000000000 r27 : 0000000000000000 r28 : 0000000000000001
r29 : 0000000000000000 r30 : 0000000000000000 r31 : 0000000000000000
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp‡000706296ff830 bsp‡000706296f1430
[<a0000001000171c0>] show_regs+0x820/0x860
sp‡000706296ffa00 bsp‡000706296f13d0
[<a00000010003bc40>] die+0x1a0/0x300
sp‡000706296ffa00 bsp‡000706296f1390
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
sp‡000706296ffa00 bsp‡000706296f1360
[<a00000010003cfe0>] ia64_fault+0x11c0/0x1280
sp‡000706296ffa00 bsp‡000706296f1308
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp‡000706296ffc10 bsp‡000706296f1308
[<a0000001001ac900>] __slab_alloc+0x80/0xca0
sp‡000706296ffde0 bsp‡000706296f1268
[<a0000001001af8e0>] __kmalloc+0x1c0/0x280
sp‡000706296ffdf0 bsp‡000706296f1230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp‡000706296ffdf0 bsp‡000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp‡000706296ffe20 bsp‡000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp‡000706296ffe20 bsp‡000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp‡000706296ffe20 bsp‡000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp‡000706296ffe30 bsp‡000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp‡000706296ffe30 bsp‡000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp‡000706296ffe30 bsp‡000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp‡000706296ffe30 bsp‡000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp‡000706296ffe30 bsp‡000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp‡000706296ffe30 bsp‡000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp‡00070629700000 bsp‡000706296f0f78
Disabling lock debugging due to kernel taint
udevd-event[6066]: '/sbin/modprobe' abnormal exit
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 2104384k swap on /dev/sda2. Priority:-1 extents:1 across:2104done
Setting up the hardware clock done
Activating device mapper...
Creating slab dm_io size@ realsize\x112 order=0 offsetH flags=0
Creating slab dm_target_io size$ realsizeñ order=0 offset2 flags=0
Creating slab dm_rq_target_io size76 realsizeD8 order=0 offset84 flags=0
Creating slab dm_rq_clone_bio_info size\x16 realsizeà order=0 offset$ flags=0
Creating slab io sized realsize\x192 order=0 offsetr flags=0
Creating slab kcopyd_job size84 realsizeE6 order=0 offset92 flags=0
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
[...]
Welcome to SUSE Linux Enterprise Server 11 (ia64) - Kernel 2.6.33-rc3-next-20100111-dirty (console).
coffee0 login:
--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-21 21:47 ` Alex Chiang
@ 2010-01-21 22:45 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-21 22:45 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> Here is another dump of dmesg. I tried to trim it a little bit
> where it made sense.
Looks like percpu data is corrupted. One of my earlier fixes dimensioned
the kmem_cache_cpu array correctly. That is missing here.
Combined fix:
---
mm/slub.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-21 22:45 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-21 22:45 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> Here is another dump of dmesg. I tried to trim it a little bit
> where it made sense.
Looks like percpu data is corrupted. One of my earlier fixes dimensioned
the kmem_cache_cpu array correctly. That is missing here.
Combined fix:
---
mm/slub.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6/mm/slub.c
=================================--- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-21 22:45 ` Christoph Lameter
@ 2010-01-21 23:05 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-21 23:05 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
> > Here is another dump of dmesg. I tried to trim it a little bit
> > where it made sense.
>
> Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> the kmem_cache_cpu array correctly. That is missing here.
Ah, that was pilot error on my part. I didn't realize that the
second patch you sent was to be in combination with the first.
Sorry about that.
> Combined fix:
>
> ---
> mm/slub.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> Index: linux-2.6/mm/slub.c
> ===================================================================
> --- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
Yup, the two together finally got it.
Reported-and-tested-by: Alex Chiang <achiang@hp.com>
Thanks!
/ac
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-21 23:05 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-21 23:05 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
> > Here is another dump of dmesg. I tried to trim it a little bit
> > where it made sense.
>
> Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> the kmem_cache_cpu array correctly. That is missing here.
Ah, that was pilot error on my part. I didn't realize that the
second patch you sent was to be in combination with the first.
Sorry about that.
> Combined fix:
>
> ---
> mm/slub.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> Index: linux-2.6/mm/slub.c
> =================================> --- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
>
Yup, the two together finally got it.
Reported-and-tested-by: Alex Chiang <achiang@hp.com>
Thanks!
/ac
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-21 23:05 ` Alex Chiang
@ 2010-01-21 23:43 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-21 23:43 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> > Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> > the kmem_cache_cpu array correctly. That is missing here.
>
> Ah, that was pilot error on my part. I didn't realize that the
> second patch you sent was to be in combination with the first.
> Sorry about that.
Difficult since I also did not track how this belonged together. Sorry.
From: Christoph Lameter <cl@linux-foundation.org>
Subject: [SLUB] dma kmalloc handling fixes
1. We need kmalloc_percpu for all of the now extended kmalloc caches
array not just for each shift value.
2. init_kmem_cache_nodes() must assume node 0 locality for statically
allocated dma kmem_cache structures even after boot is complete.
Reported-and-tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6/mm/slub.c
===================================================================
--- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-21 23:43 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-21 23:43 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> > Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> > the kmem_cache_cpu array correctly. That is missing here.
>
> Ah, that was pilot error on my part. I didn't realize that the
> second patch you sent was to be in combination with the first.
> Sorry about that.
Difficult since I also did not track how this belonged together. Sorry.
From: Christoph Lameter <cl@linux-foundation.org>
Subject: [SLUB] dma kmalloc handling fixes
1. We need kmalloc_percpu for all of the now extended kmalloc caches
array not just for each shift value.
2. init_kmem_cache_nodes() must assume node 0 locality for statically
allocated dma kmem_cache structures even after boot is complete.
Reported-and-tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
---
mm/slub.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6/mm/slub.c
=================================--- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
+++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
@@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
#endif
}
-static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
+static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
{
@@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
int node;
int local_node;
- if (slab_state >= UP)
+ if (slab_state >= UP && (s < kmalloc_caches ||
+ s > kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-21 23:43 ` Christoph Lameter
@ 2010-01-22 0:15 ` Alex Chiang
-1 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-22 0:15 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm, akpm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
> > > Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> > > the kmem_cache_cpu array correctly. That is missing here.
> >
> > Ah, that was pilot error on my part. I didn't realize that the
> > second patch you sent was to be in combination with the first.
> > Sorry about that.
>
> Difficult since I also did not track how this belonged together. Sorry.
No prob.
Replying and cc'ing so akpm sees this as our final answer. :)
/ac
>
>
> From: Christoph Lameter <cl@linux-foundation.org>
> Subject: [SLUB] dma kmalloc handling fixes
>
> 1. We need kmalloc_percpu for all of the now extended kmalloc caches
> array not just for each shift value.
>
> 2. init_kmem_cache_nodes() must assume node 0 locality for statically
> allocated dma kmem_cache structures even after boot is complete.
>
> Reported-and-tested-by: Alex Chiang <achiang@hp.com>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
>
> ---
> mm/slub.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> Index: linux-2.6/mm/slub.c
> ===================================================================
> --- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-22 0:15 ` Alex Chiang
0 siblings, 0 replies; 59+ messages in thread
From: Alex Chiang @ 2010-01-22 0:15 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm, akpm
* Christoph Lameter <cl@linux-foundation.org>:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
> > > Looks like percpu data is corrupted. One of my earlier fixes dimensioned
> > > the kmem_cache_cpu array correctly. That is missing here.
> >
> > Ah, that was pilot error on my part. I didn't realize that the
> > second patch you sent was to be in combination with the first.
> > Sorry about that.
>
> Difficult since I also did not track how this belonged together. Sorry.
No prob.
Replying and cc'ing so akpm sees this as our final answer. :)
/ac
>
>
> From: Christoph Lameter <cl@linux-foundation.org>
> Subject: [SLUB] dma kmalloc handling fixes
>
> 1. We need kmalloc_percpu for all of the now extended kmalloc caches
> array not just for each shift value.
>
> 2. init_kmem_cache_nodes() must assume node 0 locality for statically
> allocated dma kmem_cache structures even after boot is complete.
>
> Reported-and-tested-by: Alex Chiang <achiang@hp.com>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
>
> ---
> mm/slub.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> Index: linux-2.6/mm/slub.c
> =================================> --- linux-2.6.orig/mm/slub.c 2010-01-21 16:39:26.000000000 -0600
> +++ linux-2.6/mm/slub.c 2010-01-21 16:40:35.000000000 -0600
> @@ -2086,7 +2086,7 @@ init_kmem_cache_node(struct kmem_cache_n
> #endif
> }
>
> -static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[SLUB_PAGE_SHIFT]);
> +static DEFINE_PER_CPU(struct kmem_cache_cpu, kmalloc_percpu[KMALLOC_CACHES]);
>
> static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags)
> {
> @@ -2176,7 +2176,8 @@ static int init_kmem_cache_nodes(struct
> int node;
> int local_node;
>
> - if (slab_state >= UP)
> + if (slab_state >= UP && (s < kmalloc_caches ||
> + s > kmalloc_caches + KMALLOC_CACHES))
> local_node = page_to_nid(virt_to_page(s));
> else
> local_node = 0;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-22 0:15 ` Alex Chiang
@ 2010-01-22 14:43 ` Christoph Lameter
-1 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-22 14:43 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm, akpm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> > Difficult since I also did not track how this belonged together. Sorry.
>
> Replying and cc'ing so akpm sees this as our final answer. :)
Well I think this is going through the git tree for slab allocators via
Pekka.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-22 14:43 ` Christoph Lameter
0 siblings, 0 replies; 59+ messages in thread
From: Christoph Lameter @ 2010-01-22 14:43 UTC (permalink / raw)
To: Alex Chiang; +Cc: Lee Schermerhorn, penberg, linux-ia64, linux-mm, akpm
On Thu, 21 Jan 2010, Alex Chiang wrote:
> > Difficult since I also did not track how this belonged together. Sorry.
>
> Replying and cc'ing so akpm sees this as our final answer. :)
Well I think this is going through the git tree for slab allocators via
Pekka.
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
2010-01-22 14:43 ` Christoph Lameter
@ 2010-01-22 16:37 ` Pekka Enberg
-1 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-22 16:37 UTC (permalink / raw)
To: Christoph Lameter
Cc: Alex Chiang, Lee Schermerhorn, linux-ia64, linux-mm, akpm
Christoph Lameter wrote:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
>>> Difficult since I also did not track how this belonged together. Sorry.
>> Replying and cc'ing so akpm sees this as our final answer. :)
>
> Well I think this is going through the git tree for slab allocators via
> Pekka.
Applied, thanks!
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: SLUB ia64 linux-next crash bisected to 756dee75
@ 2010-01-22 16:37 ` Pekka Enberg
0 siblings, 0 replies; 59+ messages in thread
From: Pekka Enberg @ 2010-01-22 16:37 UTC (permalink / raw)
To: Christoph Lameter
Cc: Alex Chiang, Lee Schermerhorn, linux-ia64, linux-mm, akpm
Christoph Lameter wrote:
> On Thu, 21 Jan 2010, Alex Chiang wrote:
>
>>> Difficult since I also did not track how this belonged together. Sorry.
>> Replying and cc'ing so akpm sees this as our final answer. :)
>
> Well I think this is going through the git tree for slab allocators via
> Pekka.
Applied, thanks!
^ permalink raw reply [flat|nested] 59+ messages in thread
end of thread, other threads:[~2010-01-22 16:37 UTC | newest]
Thread overview: 59+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-01-13 0:29 SLUB ia64 linux-next crash bisected to 756dee75 Alex Chiang
2010-01-13 14:59 ` Christoph Lameter
2010-01-13 14:59 ` Christoph Lameter
2010-01-14 0:53 ` Alex Chiang
2010-01-14 0:53 ` Alex Chiang
2010-01-14 15:01 ` Christoph Lameter
2010-01-14 15:01 ` Christoph Lameter
2010-01-14 18:01 ` Alex Chiang
2010-01-14 18:01 ` Alex Chiang
2010-01-14 15:18 ` Christoph Lameter
2010-01-14 15:18 ` Christoph Lameter
2010-01-14 18:22 ` Alex Chiang
2010-01-14 18:22 ` Alex Chiang
2010-01-14 19:17 ` Pekka Enberg
2010-01-14 19:17 ` Pekka Enberg
2010-01-14 20:32 ` Alex Chiang
2010-01-14 20:32 ` Alex Chiang
2010-01-14 20:58 ` Christoph Lameter
2010-01-14 20:58 ` Christoph Lameter
2010-01-14 21:29 ` Alex Chiang
2010-01-14 21:29 ` Alex Chiang
2010-01-14 21:31 ` Pekka Enberg
2010-01-14 21:31 ` Pekka Enberg
2010-01-14 21:59 ` Christoph Lameter
2010-01-14 21:59 ` Christoph Lameter
2010-01-14 22:01 ` Christoph Lameter
2010-01-14 22:01 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2010-01-15 20:35 ` Lee Schermerhorn
2010-01-15 20:35 ` Lee Schermerhorn
2010-01-15 23:32 ` Christoph Lameter
2010-01-15 23:32 ` Christoph Lameter
2010-01-19 18:53 ` Christoph Lameter
2010-01-19 18:53 ` Christoph Lameter
2010-01-19 20:02 ` Alex Chiang
2010-01-19 20:02 ` Alex Chiang
2010-01-19 20:29 ` Christoph Lameter
2010-01-19 20:29 ` Christoph Lameter
2010-01-19 21:29 ` Alex Chiang
2010-01-19 21:29 ` Alex Chiang
2010-01-19 21:50 ` Christoph Lameter
2010-01-19 21:50 ` Christoph Lameter
2010-01-20 22:46 ` Alex Chiang
2010-01-20 22:46 ` Alex Chiang
2010-01-21 21:47 ` Alex Chiang
2010-01-21 21:47 ` Alex Chiang
2010-01-21 22:45 ` Christoph Lameter
2010-01-21 22:45 ` Christoph Lameter
2010-01-21 23:05 ` Alex Chiang
2010-01-21 23:05 ` Alex Chiang
2010-01-21 23:43 ` Christoph Lameter
2010-01-21 23:43 ` Christoph Lameter
2010-01-22 0:15 ` Alex Chiang
2010-01-22 0:15 ` Alex Chiang
2010-01-22 14:43 ` Christoph Lameter
2010-01-22 14:43 ` Christoph Lameter
2010-01-22 16:37 ` Pekka Enberg
2010-01-22 16:37 ` Pekka Enberg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.