From: Paul Walmsley <paul@pwsan.com> To: tony@atomide.com Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL] OMAP: SoC data/core: cleanups for 3.1 Date: Sat, 9 Jul 2011 20:37:23 -0600 (MDT) [thread overview] Message-ID: <alpine.DEB.2.00.1107092031400.15984@utopia.booyaka.com> (raw) Hello Tony, The following changes since commit ecba3287b4121dcf3ca7607fe71c205913edec06: Merge branch 'cleanup-part-2' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap/cleanup (2011-07-08 15:01:45 +0000) are available in the git repository at: git://git.pwsan.com/linux-2.6 prcm-cleanup-3.1 Benoit Cousson (21): OMAP2+: hwmod: Fix smart-standby + wakeup support OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flag OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not set OMAP2+: hwmod: Remove _populate_mpu_rt_base warning OMAP2+: hwmod: Fix the HW reset management OMAP: hwmod: Add warnings if enable failed OMAP: hwmod: Move pr_debug to improve the readability OMAP4: hwmod data: Fix L3 interconnect data order and alignement OMAP4: hwmod data: Remove un-needed parens OMAP4: hwmod data: Fix bad alignement OMAP4: hwmod data: Align interconnect format with regular modules OMAP4: clock data: Add sddiv to USB DPLL OMAP4: clock data: Remove usb_host_fs clkdev with NULL dev OMAP4: clock data: Re-order some clock nodes and structure fields OMAP4: clock data: Fix max mult and div for USB DPLL OMAP4: prcm: Fix errors in few defines name OMAP4: prm: Remove wrong clockdomain offsets OMAP4: powerdomain data: Fix indentation OMAP4: cm: Remove RESTORE macros to avoid access from SW OMAP4: prcm_mpu: Fix indent in few macros OMAP4: clockdomain data: Fix data order and wrong name Jean Pihet (1): OMAP PM: remove OMAP_PM_NONE config option Jon Hunter (2): OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocks OMAP4: clock data: Remove UNIPRO clock nodes Kevin Hilman (1): OMAP: omap_device: replace _find_by_pdev() with to_omap_device() Miguel Vadillo (1): OMAP2+: hwmod: Enable module in shutdown to access sysconfig Paul Walmsley (9): OMAP: dmtimer: add missing include omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays omap_hwmod: share identical omap_hwmod_addr_space arrays omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays omap_hwmod: share identical omap_hwmod_mpu_irqs arrays omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays omap_hwmod: share identical omap_hwmod_dma_info arrays omap_hwmod: share identical omap_hwmod_class, omap_hwmod_class_sysconfig arrays Merge branches 'dmtimer_precleanup_3.1', 'hwmod_core_cleanup_a_3.1', 'combine_common_hwmod_3.1', 'omap4_hwmod_data_cleanup_a_3.1', 'clock_cleanup_a_3.1', 'prcm_cleanup_a_3.1', 'omap_pm_cleanup_3.1' and 'omap_device_cleanup_3.1' into prcm-cleanup-3.1 arch/arm/mach-omap2/Makefile | 16 +- arch/arm/mach-omap2/clock44xx.h | 7 - arch/arm/mach-omap2/clock44xx_data.c | 237 ++---- arch/arm/mach-omap2/clockdomains44xx_data.c | 124 ++-- arch/arm/mach-omap2/cm-regbits-44xx.h | 623 ++++++-------- arch/arm/mach-omap2/cm1_44xx.h | 64 +-- arch/arm/mach-omap2/cm2_44xx.h | 73 +-- arch/arm/mach-omap2/omap_hwmod.c | 223 ++++-- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 832 +++---------------- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 910 +++----------------- .../omap_hwmod_2xxx_3xxx_interconnect_data.c | 173 ++++ .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 322 +++++++ .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 130 +++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 150 ++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 654 +++----------- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 472 +++++----- arch/arm/mach-omap2/omap_hwmod_common_data.c | 20 - arch/arm/mach-omap2/omap_hwmod_common_data.h | 93 ++- arch/arm/mach-omap2/powerdomains44xx_data.c | 18 +- arch/arm/mach-omap2/prcm_mpu44xx.h | 69 +- arch/arm/mach-omap2/prm44xx.h | 34 +- arch/arm/plat-omap/Kconfig | 3 - arch/arm/plat-omap/include/plat/clock.h | 2 +- arch/arm/plat-omap/include/plat/dmtimer.h | 1 + arch/arm/plat-omap/include/plat/omap-pm.h | 8 - arch/arm/plat-omap/include/plat/omap_hwmod.h | 20 +- arch/arm/plat-omap/omap_device.c | 15 +- 27 files changed, 2117 insertions(+), 3176 deletions(-) create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c omap2plus_defconfig text data bss dec hex filename 6353285 528944 5591048 12473277 be53bd vmlinux.orig 6351345 529296 5591048 12471689 be4d89 vmlinux.patched
WARNING: multiple messages have this Message-ID (diff)
From: paul@pwsan.com (Paul Walmsley) To: linux-arm-kernel@lists.infradead.org Subject: [GIT PULL] OMAP: SoC data/core: cleanups for 3.1 Date: Sat, 9 Jul 2011 20:37:23 -0600 (MDT) [thread overview] Message-ID: <alpine.DEB.2.00.1107092031400.15984@utopia.booyaka.com> (raw) Hello Tony, The following changes since commit ecba3287b4121dcf3ca7607fe71c205913edec06: Merge branch 'cleanup-part-2' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap/cleanup (2011-07-08 15:01:45 +0000) are available in the git repository at: git://git.pwsan.com/linux-2.6 prcm-cleanup-3.1 Benoit Cousson (21): OMAP2+: hwmod: Fix smart-standby + wakeup support OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flag OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not set OMAP2+: hwmod: Remove _populate_mpu_rt_base warning OMAP2+: hwmod: Fix the HW reset management OMAP: hwmod: Add warnings if enable failed OMAP: hwmod: Move pr_debug to improve the readability OMAP4: hwmod data: Fix L3 interconnect data order and alignement OMAP4: hwmod data: Remove un-needed parens OMAP4: hwmod data: Fix bad alignement OMAP4: hwmod data: Align interconnect format with regular modules OMAP4: clock data: Add sddiv to USB DPLL OMAP4: clock data: Remove usb_host_fs clkdev with NULL dev OMAP4: clock data: Re-order some clock nodes and structure fields OMAP4: clock data: Fix max mult and div for USB DPLL OMAP4: prcm: Fix errors in few defines name OMAP4: prm: Remove wrong clockdomain offsets OMAP4: powerdomain data: Fix indentation OMAP4: cm: Remove RESTORE macros to avoid access from SW OMAP4: prcm_mpu: Fix indent in few macros OMAP4: clockdomain data: Fix data order and wrong name Jean Pihet (1): OMAP PM: remove OMAP_PM_NONE config option Jon Hunter (2): OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocks OMAP4: clock data: Remove UNIPRO clock nodes Kevin Hilman (1): OMAP: omap_device: replace _find_by_pdev() with to_omap_device() Miguel Vadillo (1): OMAP2+: hwmod: Enable module in shutdown to access sysconfig Paul Walmsley (9): OMAP: dmtimer: add missing include omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays omap_hwmod: share identical omap_hwmod_addr_space arrays omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays omap_hwmod: share identical omap_hwmod_mpu_irqs arrays omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays omap_hwmod: share identical omap_hwmod_dma_info arrays omap_hwmod: share identical omap_hwmod_class, omap_hwmod_class_sysconfig arrays Merge branches 'dmtimer_precleanup_3.1', 'hwmod_core_cleanup_a_3.1', 'combine_common_hwmod_3.1', 'omap4_hwmod_data_cleanup_a_3.1', 'clock_cleanup_a_3.1', 'prcm_cleanup_a_3.1', 'omap_pm_cleanup_3.1' and 'omap_device_cleanup_3.1' into prcm-cleanup-3.1 arch/arm/mach-omap2/Makefile | 16 +- arch/arm/mach-omap2/clock44xx.h | 7 - arch/arm/mach-omap2/clock44xx_data.c | 237 ++---- arch/arm/mach-omap2/clockdomains44xx_data.c | 124 ++-- arch/arm/mach-omap2/cm-regbits-44xx.h | 623 ++++++-------- arch/arm/mach-omap2/cm1_44xx.h | 64 +-- arch/arm/mach-omap2/cm2_44xx.h | 73 +-- arch/arm/mach-omap2/omap_hwmod.c | 223 ++++-- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 832 +++---------------- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 910 +++----------------- .../omap_hwmod_2xxx_3xxx_interconnect_data.c | 173 ++++ .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 322 +++++++ .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 130 +++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 150 ++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 654 +++----------- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 472 +++++----- arch/arm/mach-omap2/omap_hwmod_common_data.c | 20 - arch/arm/mach-omap2/omap_hwmod_common_data.h | 93 ++- arch/arm/mach-omap2/powerdomains44xx_data.c | 18 +- arch/arm/mach-omap2/prcm_mpu44xx.h | 69 +- arch/arm/mach-omap2/prm44xx.h | 34 +- arch/arm/plat-omap/Kconfig | 3 - arch/arm/plat-omap/include/plat/clock.h | 2 +- arch/arm/plat-omap/include/plat/dmtimer.h | 1 + arch/arm/plat-omap/include/plat/omap-pm.h | 8 - arch/arm/plat-omap/include/plat/omap_hwmod.h | 20 +- arch/arm/plat-omap/omap_device.c | 15 +- 27 files changed, 2117 insertions(+), 3176 deletions(-) create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c omap2plus_defconfig text data bss dec hex filename 6353285 528944 5591048 12473277 be53bd vmlinux.orig 6351345 529296 5591048 12471689 be4d89 vmlinux.patched
next reply other threads:[~2011-07-10 2:37 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-07-10 2:37 Paul Walmsley [this message] 2011-07-10 2:37 ` [GIT PULL] OMAP: SoC data/core: cleanups for 3.1 Paul Walmsley 2011-07-11 8:32 ` Tony Lindgren 2011-07-11 8:32 ` Tony Lindgren 2011-07-13 6:38 ` Paul Walmsley 2011-07-13 6:38 ` Paul Walmsley 2011-07-13 6:49 ` Tony Lindgren 2011-07-13 6:49 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=alpine.DEB.2.00.1107092031400.15984@utopia.booyaka.com \ --to=paul@pwsan.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.