All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: Anthony PERARD <anthony.perard@citrix.com>
Cc: Alex Williamson <alex.williamson@redhat.com>,
	Xen Devel <xen-devel@lists.xensource.com>,
	QEMU-devel <qemu-devel@nongnu.org>,
	Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Subject: Re: [Qemu-devel] [PATCH RFC V1 01/11] Introduce HostPCIDevice to access a pci device on the host.
Date: Tue, 4 Oct 2011 19:36:18 +0100	[thread overview]
Message-ID: <alpine.DEB.2.00.1110041921470.3519@kaball-desktop> (raw)
In-Reply-To: <1317739882-4809-2-git-send-email-anthony.perard@citrix.com>

On Tue, 4 Oct 2011, Anthony PERARD wrote:
> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
> ---
>  hw/host-pci-device.c |  192 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/host-pci-device.h |   36 +++++++++
>  2 files changed, 228 insertions(+), 0 deletions(-)
>  create mode 100644 hw/host-pci-device.c
>  create mode 100644 hw/host-pci-device.h
> 
> diff --git a/hw/host-pci-device.c b/hw/host-pci-device.c
> new file mode 100644
> index 0000000..b3f2899
> --- /dev/null
> +++ b/hw/host-pci-device.c
> @@ -0,0 +1,192 @@
> +#include "qemu-common.h"
> +#include "host-pci-device.h"
> +
> +static int path_to(const HostPCIDevice *d,
> +                   const char *name, char *buf, ssize_t size)
> +{
> +    return snprintf(buf, size, "/sys/bus/pci/devices/%04x:%02x:%02x.%x/%s",
> +                    d->domain, d->bus, d->dev, d->func, name);
> +}

This is all very Linux specific so at the very least it should only be
compiled if CONFIG_LINUX.


> +static int get_resource(HostPCIDevice *d)
> +{
> +    int i;
> +    FILE *f;
> +    char path[PATH_MAX];
> +    unsigned long long start, end, flags, size;
> +
> +    path_to(d, "resource", path, sizeof (path));
> +    f = fopen(path, "r");
> +    if (!f) {
> +        fprintf(stderr, "Error: Can't open %s: %s\n", path, strerror(errno));
> +        return -1;
> +    }
> +
> +    for (i = 0; i < PCI_NUM_REGIONS; i++) {
> +        if (fscanf(f, "%llx %llx %llx", &start, &end, &flags) != 3) {
> +            fprintf(stderr, "Error: Syntax error in %s\n", path);
> +            break;
> +        }

you should return error in this case


> +        if (start) {
> +            size = end - start + 1;
> +        } else {
> +            size = 0;
> +        }
> +
> +        flags &= 0xf;

please #define what mask is this 0xf


> +        if (i < PCI_ROM_SLOT) {
> +            d->base_addr[i] = start | flags;
> +            d->size[i] = size;
> +        } else {
> +            d->rom_base_addr = start | flags;
> +            d->rom_size = size;
> +        }
> +    }
> +
> +    fclose(f);
> +    return 0;
> +}
> +
> +static unsigned long get_value(HostPCIDevice *d, const char *name)
> +{
> +    char path[PATH_MAX];
> +    FILE *f;
> +    unsigned long value;
> +
> +    path_to(d, name, path, sizeof (path));
> +    f = fopen(path, "r");
> +    if (!f) {
> +        fprintf(stderr, "Error: Can't open %s: %s\n", path, strerror(errno));
> +        return -1;
> +    }
> +    if (fscanf(f, "%lx\n", &value) != 1) {
> +        fprintf(stderr, "Error: Syntax error in %s\n", path);
> +        value = -1;
> +    }
> +    fclose(f);
> +    return value;
> +}
> +
> +static int pci_dev_is_virtfn(HostPCIDevice *d)
> +{
> +    int rc;
> +    char path[PATH_MAX];
> +    struct stat buf;
> +
> +    path_to(d, "physfn", path, sizeof (path));
> +    rc = !stat(path, &buf);
> +
> +    return rc;
> +}
> +
> +static int host_pci_config_fd(HostPCIDevice *d)
> +{
> +    char path[PATH_MAX];
> +
> +    if (d->config_fd < 0) {
> +        path_to(d, "config", path, sizeof (path));
> +        d->config_fd = open(path, O_RDWR);
> +        if (d->config_fd < 0) {
> +            fprintf(stderr, "HostPCIDevice: Can not open '%s': %s\n",
> +                    path, strerror(errno));
> +        }
> +    }
> +    return d->config_fd;
> +}
> +static int host_pci_config_read(HostPCIDevice *d, int pos, void *buf, int len)
> +{
> +    int fd = host_pci_config_fd(d);
> +    int res = 0;
> +
> +    res = pread(fd, buf, len, pos);
> +    if (res < 0) {
> +        fprintf(stderr, "host_pci_config: read failed: %s (fd: %i)\n",
> +                strerror(errno), fd);
> +        return -1;
> +    }
> +    return res;
> +}
> +static int host_pci_config_write(HostPCIDevice *d,
> +                                 int pos, const void *buf, int len)
> +{
> +    int fd = host_pci_config_fd(d);
> +    int res = 0;
> +
> +    res = pwrite(fd, buf, len, pos);
> +    if (res < 0) {
> +        fprintf(stderr, "host_pci_config: write failed: %s\n",
> +                strerror(errno));
> +        return -1;
> +    }
> +    return res;
> +}
> +
> +uint8_t host_pci_read_byte(HostPCIDevice *d, int pos)
> +{
> +  uint8_t buf;
> +  host_pci_config_read(d, pos, &buf, 1);
> +  return buf;
> +}
> +uint16_t host_pci_read_word(HostPCIDevice *d, int pos)
> +{
> +  uint16_t buf;
> +  host_pci_config_read(d, pos, &buf, 2);
> +  return le16_to_cpu(buf);
> +}
> +uint32_t host_pci_read_long(HostPCIDevice *d, int pos)
> +{
> +  uint32_t buf;
> +  host_pci_config_read(d, pos, &buf, 4);
> +  return le32_to_cpu(buf);
> +}
> +int host_pci_read_block(HostPCIDevice *d, int pos, uint8_t *buf, int len)
> +{
> +  return host_pci_config_read(d, pos, buf, len);
> +}
> +
> +int host_pci_write_byte(HostPCIDevice *d, int pos, uint8_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 1);
> +}
> +int host_pci_write_word(HostPCIDevice *d, int pos, uint16_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 2);
> +}
> +int host_pci_write_long(HostPCIDevice *d, int pos, uint32_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 4);
> +}
> +int host_pci_write_block(HostPCIDevice *d, int pos, uint8_t *buf, int len)
> +{
> +  return host_pci_config_write(d, pos, buf, len);
> +}
> +
> +HostPCIDevice *host_pci_device_get(uint8_t bus, uint8_t dev, uint8_t func)
> +{
> +    HostPCIDevice *d = NULL;
> +
> +    d = g_new0(HostPCIDevice, 1);
> +
> +    d->config_fd = -1;
> +    d->domain = 0;
> +    d->bus = bus;
> +    d->dev = dev;
> +    d->func = func;
> +
> +    if (host_pci_config_fd(d) == -1)
> +        goto error;
> +    if (get_resource(d) == -1)
> +        goto error;
> +
> +    d->vendor_id = get_value(d, "vendor");
> +    d->device_id = get_value(d, "device");
> +    d->is_virtfn = pci_dev_is_virtfn(d);
> +
> +    return d;
> +error:
> +    if (d->config_fd >= 0)
> +        close(d->config_fd);
> +    g_free(d);
> +    return NULL;
> +}
> diff --git a/hw/host-pci-device.h b/hw/host-pci-device.h
> new file mode 100644
> index 0000000..0137507
> --- /dev/null
> +++ b/hw/host-pci-device.h
> @@ -0,0 +1,36 @@
> +#ifndef HW_HOST_PCI_DEVICE
> +#  define HW_HOST_PCI_DEVICE
> +
> +#include "pci.h"
> +
> +typedef struct HostPCIDevice {
> +    uint16_t domain;
> +    uint8_t bus;
> +    uint8_t dev;
> +    uint8_t func;
> +
> +    uint16_t vendor_id;
> +    uint16_t device_id;
> +
> +    pcibus_t base_addr[PCI_NUM_REGIONS - 1];
> +    pcibus_t size[PCI_NUM_REGIONS - 1];
> +    pcibus_t rom_base_addr;
> +    pcibus_t rom_size;
> +
> +    bool is_virtfn;
> +
> +    int config_fd;
> +} HostPCIDevice;
> +
> +HostPCIDevice *host_pci_device_get(uint8_t bus, uint8_t dev, uint8_t func);
> +
> +uint8_t host_pci_read_byte(HostPCIDevice *d, int pos);
> +uint16_t host_pci_read_word(HostPCIDevice *d, int pos);
> +uint32_t host_pci_read_long(HostPCIDevice *d, int pos);
> +int host_pci_read_block(HostPCIDevice *d, int pos, uint8_t *buf, int len);
> +int host_pci_write_byte(HostPCIDevice *d, int pos, uint8_t data);
> +int host_pci_write_word(HostPCIDevice *d, int pos, uint16_t data);
> +int host_pci_write_long(HostPCIDevice *d, int pos, uint32_t data);
> +int host_pci_write_block(HostPCIDevice *d, int pos, uint8_t *buf, int len);
> +
> +#endif /* !HW_HOST_PCI_DEVICE */

WARNING: multiple messages have this Message-ID (diff)
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: Anthony PERARD <anthony.perard@citrix.com>
Cc: Alex Williamson <alex.williamson@redhat.com>,
	Xen Devel <xen-devel@lists.xensource.com>,
	QEMU-devel <qemu-devel@nongnu.org>,
	Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Subject: Re: [PATCH RFC V1 01/11] Introduce HostPCIDevice to access a pci device on the host.
Date: Tue, 4 Oct 2011 19:36:18 +0100	[thread overview]
Message-ID: <alpine.DEB.2.00.1110041921470.3519@kaball-desktop> (raw)
In-Reply-To: <1317739882-4809-2-git-send-email-anthony.perard@citrix.com>

On Tue, 4 Oct 2011, Anthony PERARD wrote:
> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
> ---
>  hw/host-pci-device.c |  192 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/host-pci-device.h |   36 +++++++++
>  2 files changed, 228 insertions(+), 0 deletions(-)
>  create mode 100644 hw/host-pci-device.c
>  create mode 100644 hw/host-pci-device.h
> 
> diff --git a/hw/host-pci-device.c b/hw/host-pci-device.c
> new file mode 100644
> index 0000000..b3f2899
> --- /dev/null
> +++ b/hw/host-pci-device.c
> @@ -0,0 +1,192 @@
> +#include "qemu-common.h"
> +#include "host-pci-device.h"
> +
> +static int path_to(const HostPCIDevice *d,
> +                   const char *name, char *buf, ssize_t size)
> +{
> +    return snprintf(buf, size, "/sys/bus/pci/devices/%04x:%02x:%02x.%x/%s",
> +                    d->domain, d->bus, d->dev, d->func, name);
> +}

This is all very Linux specific so at the very least it should only be
compiled if CONFIG_LINUX.


> +static int get_resource(HostPCIDevice *d)
> +{
> +    int i;
> +    FILE *f;
> +    char path[PATH_MAX];
> +    unsigned long long start, end, flags, size;
> +
> +    path_to(d, "resource", path, sizeof (path));
> +    f = fopen(path, "r");
> +    if (!f) {
> +        fprintf(stderr, "Error: Can't open %s: %s\n", path, strerror(errno));
> +        return -1;
> +    }
> +
> +    for (i = 0; i < PCI_NUM_REGIONS; i++) {
> +        if (fscanf(f, "%llx %llx %llx", &start, &end, &flags) != 3) {
> +            fprintf(stderr, "Error: Syntax error in %s\n", path);
> +            break;
> +        }

you should return error in this case


> +        if (start) {
> +            size = end - start + 1;
> +        } else {
> +            size = 0;
> +        }
> +
> +        flags &= 0xf;

please #define what mask is this 0xf


> +        if (i < PCI_ROM_SLOT) {
> +            d->base_addr[i] = start | flags;
> +            d->size[i] = size;
> +        } else {
> +            d->rom_base_addr = start | flags;
> +            d->rom_size = size;
> +        }
> +    }
> +
> +    fclose(f);
> +    return 0;
> +}
> +
> +static unsigned long get_value(HostPCIDevice *d, const char *name)
> +{
> +    char path[PATH_MAX];
> +    FILE *f;
> +    unsigned long value;
> +
> +    path_to(d, name, path, sizeof (path));
> +    f = fopen(path, "r");
> +    if (!f) {
> +        fprintf(stderr, "Error: Can't open %s: %s\n", path, strerror(errno));
> +        return -1;
> +    }
> +    if (fscanf(f, "%lx\n", &value) != 1) {
> +        fprintf(stderr, "Error: Syntax error in %s\n", path);
> +        value = -1;
> +    }
> +    fclose(f);
> +    return value;
> +}
> +
> +static int pci_dev_is_virtfn(HostPCIDevice *d)
> +{
> +    int rc;
> +    char path[PATH_MAX];
> +    struct stat buf;
> +
> +    path_to(d, "physfn", path, sizeof (path));
> +    rc = !stat(path, &buf);
> +
> +    return rc;
> +}
> +
> +static int host_pci_config_fd(HostPCIDevice *d)
> +{
> +    char path[PATH_MAX];
> +
> +    if (d->config_fd < 0) {
> +        path_to(d, "config", path, sizeof (path));
> +        d->config_fd = open(path, O_RDWR);
> +        if (d->config_fd < 0) {
> +            fprintf(stderr, "HostPCIDevice: Can not open '%s': %s\n",
> +                    path, strerror(errno));
> +        }
> +    }
> +    return d->config_fd;
> +}
> +static int host_pci_config_read(HostPCIDevice *d, int pos, void *buf, int len)
> +{
> +    int fd = host_pci_config_fd(d);
> +    int res = 0;
> +
> +    res = pread(fd, buf, len, pos);
> +    if (res < 0) {
> +        fprintf(stderr, "host_pci_config: read failed: %s (fd: %i)\n",
> +                strerror(errno), fd);
> +        return -1;
> +    }
> +    return res;
> +}
> +static int host_pci_config_write(HostPCIDevice *d,
> +                                 int pos, const void *buf, int len)
> +{
> +    int fd = host_pci_config_fd(d);
> +    int res = 0;
> +
> +    res = pwrite(fd, buf, len, pos);
> +    if (res < 0) {
> +        fprintf(stderr, "host_pci_config: write failed: %s\n",
> +                strerror(errno));
> +        return -1;
> +    }
> +    return res;
> +}
> +
> +uint8_t host_pci_read_byte(HostPCIDevice *d, int pos)
> +{
> +  uint8_t buf;
> +  host_pci_config_read(d, pos, &buf, 1);
> +  return buf;
> +}
> +uint16_t host_pci_read_word(HostPCIDevice *d, int pos)
> +{
> +  uint16_t buf;
> +  host_pci_config_read(d, pos, &buf, 2);
> +  return le16_to_cpu(buf);
> +}
> +uint32_t host_pci_read_long(HostPCIDevice *d, int pos)
> +{
> +  uint32_t buf;
> +  host_pci_config_read(d, pos, &buf, 4);
> +  return le32_to_cpu(buf);
> +}
> +int host_pci_read_block(HostPCIDevice *d, int pos, uint8_t *buf, int len)
> +{
> +  return host_pci_config_read(d, pos, buf, len);
> +}
> +
> +int host_pci_write_byte(HostPCIDevice *d, int pos, uint8_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 1);
> +}
> +int host_pci_write_word(HostPCIDevice *d, int pos, uint16_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 2);
> +}
> +int host_pci_write_long(HostPCIDevice *d, int pos, uint32_t data)
> +{
> +  return host_pci_config_write(d, pos, &data, 4);
> +}
> +int host_pci_write_block(HostPCIDevice *d, int pos, uint8_t *buf, int len)
> +{
> +  return host_pci_config_write(d, pos, buf, len);
> +}
> +
> +HostPCIDevice *host_pci_device_get(uint8_t bus, uint8_t dev, uint8_t func)
> +{
> +    HostPCIDevice *d = NULL;
> +
> +    d = g_new0(HostPCIDevice, 1);
> +
> +    d->config_fd = -1;
> +    d->domain = 0;
> +    d->bus = bus;
> +    d->dev = dev;
> +    d->func = func;
> +
> +    if (host_pci_config_fd(d) == -1)
> +        goto error;
> +    if (get_resource(d) == -1)
> +        goto error;
> +
> +    d->vendor_id = get_value(d, "vendor");
> +    d->device_id = get_value(d, "device");
> +    d->is_virtfn = pci_dev_is_virtfn(d);
> +
> +    return d;
> +error:
> +    if (d->config_fd >= 0)
> +        close(d->config_fd);
> +    g_free(d);
> +    return NULL;
> +}
> diff --git a/hw/host-pci-device.h b/hw/host-pci-device.h
> new file mode 100644
> index 0000000..0137507
> --- /dev/null
> +++ b/hw/host-pci-device.h
> @@ -0,0 +1,36 @@
> +#ifndef HW_HOST_PCI_DEVICE
> +#  define HW_HOST_PCI_DEVICE
> +
> +#include "pci.h"
> +
> +typedef struct HostPCIDevice {
> +    uint16_t domain;
> +    uint8_t bus;
> +    uint8_t dev;
> +    uint8_t func;
> +
> +    uint16_t vendor_id;
> +    uint16_t device_id;
> +
> +    pcibus_t base_addr[PCI_NUM_REGIONS - 1];
> +    pcibus_t size[PCI_NUM_REGIONS - 1];
> +    pcibus_t rom_base_addr;
> +    pcibus_t rom_size;
> +
> +    bool is_virtfn;
> +
> +    int config_fd;
> +} HostPCIDevice;
> +
> +HostPCIDevice *host_pci_device_get(uint8_t bus, uint8_t dev, uint8_t func);
> +
> +uint8_t host_pci_read_byte(HostPCIDevice *d, int pos);
> +uint16_t host_pci_read_word(HostPCIDevice *d, int pos);
> +uint32_t host_pci_read_long(HostPCIDevice *d, int pos);
> +int host_pci_read_block(HostPCIDevice *d, int pos, uint8_t *buf, int len);
> +int host_pci_write_byte(HostPCIDevice *d, int pos, uint8_t data);
> +int host_pci_write_word(HostPCIDevice *d, int pos, uint16_t data);
> +int host_pci_write_long(HostPCIDevice *d, int pos, uint32_t data);
> +int host_pci_write_block(HostPCIDevice *d, int pos, uint8_t *buf, int len);
> +
> +#endif /* !HW_HOST_PCI_DEVICE */

  parent reply	other threads:[~2011-10-04 18:36 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-04 14:51 [Qemu-devel] [PATCH RFC V1 00/11] Xen PCI Passthrough Anthony PERARD
2011-10-04 14:51 ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 01/11] Introduce HostPCIDevice to access a pci device on the host Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 18:21   ` [Qemu-devel] " Jan Kiszka
2011-10-04 18:21     ` Jan Kiszka
2011-10-12 16:56     ` [Qemu-devel] " Anthony PERARD
2011-10-12 16:56       ` Anthony PERARD
2011-10-04 18:36   ` Stefano Stabellini [this message]
2011-10-04 18:36     ` Stefano Stabellini
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 02/11] qemu-timer: Introduce qemu_run_one_timer Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 17:27   ` [Qemu-devel] " Jan Kiszka
2011-10-04 17:27     ` Jan Kiszka
2011-10-04 17:52     ` [Qemu-devel] " Stefano Stabellini
2011-10-04 17:52       ` Stefano Stabellini
2011-10-04 18:20     ` [Qemu-devel] " Anthony Liguori
2011-10-04 18:20       ` Anthony Liguori
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 03/11] pci_ids: Add INTEL_82599_VF id Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 04/11] pci_regs: Fix value of PCI_EXP_TYPE_RC_EC Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 05/11] pci_regs: Add PCI_EXP_TYPE_PCIE_BRIDGE Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 06/11] pci.c: Add pci_check_bar_overlap Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 07/11] host-pci-device: Add host_pci_find_ext_cap_offset Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-05 11:07   ` [Qemu-devel] " Stefano Stabellini
2011-10-05 11:07     ` Stefano Stabellini
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 08/11] Introduce Xen PCI Passthrough, qdevice (1/3) Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-05 11:51   ` [Qemu-devel] " Stefano Stabellini
2011-10-05 11:51     ` Stefano Stabellini
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 09/11] Introduce Xen PCI Passthrough, PCI config space helpers (2/3) Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 10/11] Introduce Xen PCI Passthrough, MSI (3/3) Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-05 11:51   ` [Qemu-devel] " Stefano Stabellini
2011-10-05 11:51     ` Stefano Stabellini
2011-10-04 14:51 ` [Qemu-devel] [PATCH RFC V1 11/11] config/make: Introduce --enable-xen-pci-passthrough, built it Anthony PERARD
2011-10-04 14:51   ` Anthony PERARD
2011-10-05 11:55   ` [Qemu-devel] " Stefano Stabellini
2011-10-05 11:55     ` Stefano Stabellini
2011-10-04 14:58 ` [Qemu-devel] [Xen-devel] [PATCH RFC V1 00/11] Xen PCI Passthrough Avi Kivity
2011-10-04 14:58   ` Avi Kivity
2011-10-04 15:01   ` [Qemu-devel] " Anthony Liguori
2011-10-04 15:01     ` Anthony Liguori
2011-10-04 15:05     ` [Qemu-devel] " Stefano Stabellini
2011-10-04 15:05       ` Stefano Stabellini
2011-10-04 16:33       ` [Qemu-devel] " Alex Williamson
2011-10-04 16:33         ` Alex Williamson
2011-10-04 16:56         ` [Qemu-devel] " Stefano Stabellini
2011-10-04 16:56           ` Stefano Stabellini
2011-10-04 17:01         ` [Qemu-devel] " Avi Kivity
2011-10-04 17:01           ` Avi Kivity
2011-10-04 17:41           ` [Qemu-devel] " Jan Kiszka
2011-10-04 17:41             ` Jan Kiszka
2011-10-04 17:03     ` [Qemu-devel] " Avi Kivity
2011-10-04 17:03       ` Avi Kivity
2011-10-04 18:19       ` [Qemu-devel] " Stefano Stabellini
2011-10-04 18:19         ` Stefano Stabellini
2011-10-04 18:24         ` [Qemu-devel] " Avi Kivity
2011-10-04 18:24           ` Avi Kivity
2011-10-04 17:21     ` [Qemu-devel] " Jan Kiszka
2011-10-04 17:21       ` Jan Kiszka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.00.1110041921470.3519@kaball-desktop \
    --to=stefano.stabellini@eu.citrix.com \
    --cc=alex.williamson@redhat.com \
    --cc=anthony.perard@citrix.com \
    --cc=qemu-devel@nongnu.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.