[PATCH] Grammatical cleanup of <linux/kfifo.h>, comments only

* [PATCH] Grammatical cleanup of <linux/kfifo.h>, comments only
@ 2012-06-21  9:55 Robert P. J. Day
  2012-06-21 19:44 ` Stefani Seibold
  0 siblings, 1 reply; 2+ messages in thread
From: Robert P. J. Day @ 2012-06-21  9:55 UTC (permalink / raw)
  To: Linux Kernel Mailing List; +Cc: Stefani Seibold


Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---

  since i was perusing kfifo.h, i figured i might as well tidy it up
while i was there.  yes, there are probably other possible tweaks, but
this should catch most of it.

  again, there are all *comment* changes and should make no functional
difference.

diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 10308c6..9fa0050 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -23,30 +23,30 @@
 #define _LINUX_KFIFO_H

 /*
- * How to porting drivers to the new generic FIFO API:
+ * How to port drivers to the new generic FIFO API:
  *
- * - Modify the declaration of the "struct kfifo *" object into a
+ * - Modify the declaration of the "struct kfifo *" object into an
  *   in-place "struct kfifo" object
  * - Init the in-place object with kfifo_alloc() or kfifo_init()
  *   Note: The address of the in-place "struct kfifo" object must be
- *   passed as the first argument to this functions
- * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get
- *   into kfifo_out
- * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get
- *   into kfifo_out_spinlocked
+ *   passed as the first argument to these functions
+ * - Replace the use of __kfifo_put with kfifo_in and __kfifo_get
+ *   with kfifo_out
+ * - Replace the use of kfifo_put with kfifo_in_spinlocked and kfifo_get
+ *   with kfifo_out_spinlocked
  *   Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc
- *   must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked
+ *   must be passed now to kfifo_in_spinlocked and kfifo_out_spinlocked
  *   as the last parameter
- * - The formerly __kfifo_* functions are renamed into kfifo_*
+ * - The formerly __kfifo_* functions are renamed as kfifo_*
  */

 /*
- * Note about locking : There is no locking required until only * one reader
- * and one writer is using the fifo and no kfifo_reset() will be * called
- *  kfifo_reset_out() can be safely used, until it will be only called
+ * Note about locking : There is no locking required until only one reader
+ * and one writer is using the fifo and no kfifo_reset() will be called
+ * kfifo_reset_out() can be safely used, until it will be only called
  * in the reader thread.
- *  For multiple writer and one reader there is only a need to lock the writer.
- * And vice versa for only one writer and multiple reader there is only a need
+ * For multiple writer and one reader there is only a need to lock the writer.
+ * And vice versa for only one writer and multiple readers there is only a need
  * to lock the reader.
  */

@@ -91,7 +91,7 @@ struct __kfifo {
 	struct __STRUCT_KFIFO_PTR(type, 0, type)

 /*
- * define compatibility "struct kfifo" for dynamic allocated fifos
+ * define compatibility "struct kfifo" for dynamically allocated fifos
  */
 struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void);

@@ -108,7 +108,7 @@ struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void);
 struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);

 /*
- * helper macro to distinguish between real in place fifo where the fifo
+ * helper macro to distinguish between real in-place fifo where the fifo
  * array is a part of the structure and the fifo type where the array is
  * outside of the fifo structure.
  */
@@ -215,7 +215,7 @@ __kfifo_int_must_check_helper(int val)
  * @fifo: address of the fifo to be used
  *
  * Note: usage of kfifo_reset() is dangerous. It should be only called when the
- * fifo is exclusived locked or when it is secured that no other thread is
+ * fifo is exclusively locked or when it is secured that no other thread is
  * accessing the fifo.
  */
 #define kfifo_reset(fifo) \
@@ -325,7 +325,7 @@ __kfifo_uint_must_check_helper( \
  * This macro dynamically allocates a new fifo buffer.
  *
  * The numer of elements will be rounded-up to a power of 2.
- * The fifo will be release with kfifo_free().
+ * The fifo will be released with kfifo_free().
  * Return 0 if no error, otherwise an error code.
  */
 #define kfifo_alloc(fifo, size, gfp_mask) \
@@ -355,11 +355,11 @@ __kfifo_int_must_check_helper( \
  * kfifo_init - initialize a fifo using a preallocated buffer
  * @fifo: the fifo to assign the buffer
  * @buffer: the preallocated buffer to be used
- * @size: the size of the internal buffer, this have to be a power of 2
+ * @size: the size of the internal buffer, this must be a power of 2
  *
- * This macro initialize a fifo using a preallocated buffer.
+ * This macro initializes a fifo using a preallocated buffer.
  *
- * The numer of elements will be rounded-up to a power of 2.
+ * The number of elements will be rounded-up to a power of 2.
  * Return 0 if no error, otherwise an error code.
  */
 #define kfifo_init(fifo, buffer, size) \
@@ -378,10 +378,10 @@ __kfifo_int_must_check_helper( \
  *
  * This macro copies the given value into the fifo.
  * It returns 0 if the fifo was full. Otherwise it returns the number
- * processed elements.
+ * of processed elements.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_put(fifo, val) \
 ({ \
@@ -419,10 +419,10 @@ __kfifo_int_must_check_helper( \
  *
  * This macro reads the data from the fifo.
  * It returns 0 if the fifo was empty. Otherwise it returns the number
- * processed elements.
+ * of processed elements.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_get(fifo, val) \
 __kfifo_uint_must_check_helper( \
@@ -460,10 +460,10 @@ __kfifo_uint_must_check_helper( \
  *
  * This reads the data from the fifo without removing it from the fifo.
  * It returns 0 if the fifo was empty. Otherwise it returns the number
- * processed elements.
+ * of processed elements.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_peek(fifo, val) \
 __kfifo_uint_must_check_helper( \
@@ -503,7 +503,7 @@ __kfifo_uint_must_check_helper( \
  * number of copied elements.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_in(fifo, buf, n) \
 ({ \
@@ -551,11 +551,11 @@ __kfifo_uint_must_check_helper( \
  * @buf: pointer to the storage buffer
  * @n: max. number of elements to get
  *
- * This macro get some data from the fifo and return the numbers of elements
+ * This macro gets some data from the fifo and returns the numbers of elements
  * copied.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_out(fifo, buf, n) \
 __kfifo_uint_must_check_helper( \
@@ -582,7 +582,7 @@ __kfifo_uint_must_check_helper( \
  * @n: max. number of elements to get
  * @lock: pointer to the spinlock to use for locking
  *
- * This macro get the data from the fifo and return the numbers of elements
+ * This macro gets the data from the fifo and returns the numbers of elements
  * copied.
  */
 #define	kfifo_out_spinlocked(fifo, buf, n, lock) \
@@ -612,7 +612,7 @@ __kfifo_uint_must_check_helper( \
  * fifo, depending of the available space and returns -EFAULT/0.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_from_user(fifo, from, len, copied) \
 __kfifo_uint_must_check_helper( \
@@ -640,7 +640,7 @@ __kfifo_uint_must_check_helper( \
  * @to buffer and returns -EFAULT/0.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_to_user(fifo, to, len, copied) \
 __kfifo_uint_must_check_helper( \
@@ -668,7 +668,7 @@ __kfifo_uint_must_check_helper( \
  * It returns the number entries in the scatterlist array.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_dma_in_prepare(fifo, sgl, nents, len) \
 ({ \
@@ -688,11 +688,11 @@ __kfifo_uint_must_check_helper( \
  * @fifo: address of the fifo to be used
  * @len: number of bytes to received
  *
- * This macro finish a DMA IN operation. The in counter will be updated by
+ * This macro finishes a DMA IN operation. The in counter will be updated by
  * the len parameter. No error checking will be done.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
+ * writer, you don't need extra locking to use this macro.
  */
 #define kfifo_dma_in_finish(fifo, len) \
 (void)({ \
@@ -713,13 +713,13 @@ __kfifo_uint_must_check_helper( \
  * @nents: number of entries in the scatterlist array
  * @len: number of elements to transfer
  *
- * This macro fills a scatterlist for DMA output which at most @len bytes
+ * This macro fills a scatterlist for DMA output with at most @len bytes
  * to transfer.
- * It returns the number entries in the scatterlist array.
+ * It returns the number of entries in the scatterlist array.
  * A zero means there is no space available and the scatterlist is not filled.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_dma_out_prepare(fifo, sgl, nents, len) \
 ({ \
@@ -739,11 +739,11 @@ __kfifo_uint_must_check_helper( \
  * @fifo: address of the fifo to be used
  * @len: number of bytes transferd
  *
- * This macro finish a DMA OUT operation. The out counter will be updated by
+ * This macro finishes a DMA OUT operation. The out counter will be updated by
  * the len parameter. No error checking will be done.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
+ * writer, you don't need extra locking to use this macro.
  */
 #define kfifo_dma_out_finish(fifo, len) \
 (void)({ \
@@ -763,11 +763,11 @@ __kfifo_uint_must_check_helper( \
  * @buf: pointer to the storage buffer
  * @n: max. number of elements to get
  *
- * This macro get the data from the fifo and return the numbers of elements
+ * This macro gets the data from the fifo and returns the numbers of elements
  * copied. The data is not removed from the fifo.
  *
  * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
+ * writer, you don't need extra locking to use this macro.
  */
 #define	kfifo_out_peek(fifo, buf, n) \
 __kfifo_uint_must_check_helper( \

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

^ permalink raw reply related	[flat|nested] 2+ messages in thread