* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
@ 2014-08-20 18:04 Jonathan Ben-Avraham
2014-08-21 10:14 ` Yann E. MORIN
2014-08-21 13:30 ` Thomas Petazzoni
0 siblings, 2 replies; 6+ messages in thread
From: Jonathan Ben-Avraham @ 2014-08-20 18:04 UTC (permalink / raw)
To: buildroot
Improve the help text for usb_modeswitch package for the benefit of the clueless.
Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
---
package/usb_modeswitch/Config.in | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/package/usb_modeswitch/Config.in b/package/usb_modeswitch/Config.in
index 5d8a6d2..2f4c2e8 100644
--- a/package/usb_modeswitch/Config.in
+++ b/package/usb_modeswitch/Config.in
@@ -3,8 +3,17 @@ config BR2_PACKAGE_USB_MODESWITCH
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
- USB mode switcher.
- Used to switch mode on multiple-function devices
+ Some USB devices such as modems and Wifi adapters power-up in mass
+ storage mode to provide access to drivers for the device's
+ application mode. USB_ModeSwitch changes the mode of such devices
+ from the initial mode to the application mode. Specific configuration
+ data for each device model is required.
+
+ usb_modeswitch can be used with package usb_modeswitch_data and udev
+ for automatic mode switching when devices are connected.
+
+ For more information Internet search for "Virtual CD-ROM switching
+ utility".
http://www.draisberghof.de/usb_modeswitch/
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
2014-08-20 18:04 [Buildroot] [PATCH] More descriptive help text for usb_modeswitch Jonathan Ben-Avraham
@ 2014-08-21 10:14 ` Yann E. MORIN
2014-08-21 12:38 ` Jonathan Ben Avraham
2014-08-21 13:30 ` Thomas Petazzoni
1 sibling, 1 reply; 6+ messages in thread
From: Yann E. MORIN @ 2014-08-21 10:14 UTC (permalink / raw)
To: buildroot
Jonathan, All,
On 2014-08-20 21:04 +0300, Jonathan Ben-Avraham spake thusly:
> Improve the help text for usb_modeswitch package for the benefit of the clueless.
>
> Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
> ---
> package/usb_modeswitch/Config.in | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/package/usb_modeswitch/Config.in b/package/usb_modeswitch/Config.in
> index 5d8a6d2..2f4c2e8 100644
> --- a/package/usb_modeswitch/Config.in
> +++ b/package/usb_modeswitch/Config.in
> @@ -3,8 +3,17 @@ config BR2_PACKAGE_USB_MODESWITCH
> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
> select BR2_PACKAGE_LIBUSB
> help
> - USB mode switcher.
> - Used to switch mode on multiple-function devices
> + Some USB devices such as modems and Wifi adapters power-up in mass
> + storage mode to provide access to drivers for the device's
I would be even more explixit why those drivers are not needed on a
Linux system:
[...] to provide access to (Windows-only) drivers for the device's
application mode. [...]
Otherwise, looks good to me:
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> + application mode. USB_ModeSwitch changes the mode of such devices
> + from the initial mode to the application mode. Specific configuration
> + data for each device model is required.
> +
> + usb_modeswitch can be used with package usb_modeswitch_data and udev
> + for automatic mode switching when devices are connected.
> +
> + For more information Internet search for "Virtual CD-ROM switching
> + utility".
>
> http://www.draisberghof.de/usb_modeswitch/
>
> --
> 1.7.10.4
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
2014-08-21 10:14 ` Yann E. MORIN
@ 2014-08-21 12:38 ` Jonathan Ben Avraham
0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Ben Avraham @ 2014-08-21 12:38 UTC (permalink / raw)
To: buildroot
Hi Yann,
I agree with your comment.
I will add the explanation about why the drivers are not required on Linux
and re-submit.
Thanks,
- yba
On Thu, 21 Aug 2014, Yann E. MORIN wrote:
> Date: Thu, 21 Aug 2014 12:14:36 +0200
> From: Yann E. MORIN <yann.morin.1998@free.fr>
> To: Jonathan Ben-Avraham <yba@tkos.co.il>
> Cc: buildroot at busybox.net
> Subject: Re: [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
>
> Jonathan, All,
>
> On 2014-08-20 21:04 +0300, Jonathan Ben-Avraham spake thusly:
>> Improve the help text for usb_modeswitch package for the benefit of the clueless.
>>
>> Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
>> ---
>> package/usb_modeswitch/Config.in | 13 +++++++++++--
>> 1 file changed, 11 insertions(+), 2 deletions(-)
>>
>> diff --git a/package/usb_modeswitch/Config.in b/package/usb_modeswitch/Config.in
>> index 5d8a6d2..2f4c2e8 100644
>> --- a/package/usb_modeswitch/Config.in
>> +++ b/package/usb_modeswitch/Config.in
>> @@ -3,8 +3,17 @@ config BR2_PACKAGE_USB_MODESWITCH
>> depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
>> select BR2_PACKAGE_LIBUSB
>> help
>> - USB mode switcher.
>> - Used to switch mode on multiple-function devices
>> + Some USB devices such as modems and Wifi adapters power-up in mass
>> + storage mode to provide access to drivers for the device's
>
> I would be even more explixit why those drivers are not needed on a
> Linux system:
>
> [...] to provide access to (Windows-only) drivers for the device's
> application mode. [...]
>
> Otherwise, looks good to me:
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>
> Regards,
> Yann E. MORIN.
>
>> + application mode. USB_ModeSwitch changes the mode of such devices
>> + from the initial mode to the application mode. Specific configuration
>> + data for each device model is required.
>> +
>> + usb_modeswitch can be used with package usb_modeswitch_data and udev
>> + for automatic mode switching when devices are connected.
>> +
>> + For more information Internet search for "Virtual CD-ROM switching
>> + utility".
>>
>> http://www.draisberghof.de/usb_modeswitch/
>>
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>
>
--
9590 8E58 D30D 1660 C349 673D B205 4FC4 B8F5 B7F9 ~. .~ Tk Open Systems
=}-------- Jonathan Ben-Avraham ("yba") ----------ooO--U--Ooo------------{=
mailto:yba at tkos.co.il tel:+972.52.486.3386 http://tkos.co.il skype:benavrhm
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
2014-08-20 18:04 [Buildroot] [PATCH] More descriptive help text for usb_modeswitch Jonathan Ben-Avraham
2014-08-21 10:14 ` Yann E. MORIN
@ 2014-08-21 13:30 ` Thomas Petazzoni
2014-08-21 13:39 ` Jonathan Ben Avraham
1 sibling, 1 reply; 6+ messages in thread
From: Thomas Petazzoni @ 2014-08-21 13:30 UTC (permalink / raw)
To: buildroot
Dear Jonathan Ben-Avraham,
On Wed, 20 Aug 2014 21:04:53 +0300, Jonathan Ben-Avraham wrote:
> Improve the help text for usb_modeswitch package for the benefit of the clueless.
>
> Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
> ---
> package/usb_modeswitch/Config.in | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
I've applied your patch, after tweaking the commit title (it should
always be "<package>: <something>"), rewrapping the help text to a
shorter line length, and slightly adjusting the wording.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
2014-08-21 13:30 ` Thomas Petazzoni
@ 2014-08-21 13:39 ` Jonathan Ben Avraham
0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Ben Avraham @ 2014-08-21 13:39 UTC (permalink / raw)
To: buildroot
Hi Thomas,
Thanks.
I'm working on a better text as per Yann's comments.
Please remind me what the line-length requirement for the help text is
(not 80 chars?).
- yba
On Thu, 21 Aug 2014, Thomas Petazzoni wrote:
> Date: Thu, 21 Aug 2014 15:30:11 +0200
> From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> To: Jonathan Ben-Avraham <yba@tkos.co.il>
> Cc: buildroot at busybox.net
> Subject: Re: [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
>
> Dear Jonathan Ben-Avraham,
>
> On Wed, 20 Aug 2014 21:04:53 +0300, Jonathan Ben-Avraham wrote:
>> Improve the help text for usb_modeswitch package for the benefit of the clueless.
>>
>> Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
>> ---
>> package/usb_modeswitch/Config.in | 13 +++++++++++--
>> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> I've applied your patch, after tweaking the commit title (it should
> always be "<package>: <something>"), rewrapping the help text to a
> shorter line length, and slightly adjusting the wording.
>
> Thanks!
>
> Thomas
>
--
9590 8E58 D30D 1660 C349 673D B205 4FC4 B8F5 B7F9 ~. .~ Tk Open Systems
=}-------- Jonathan Ben-Avraham ("yba") ----------ooO--U--Ooo------------{=
mailto:yba at tkos.co.il tel:+972.52.486.3386 http://tkos.co.il skype:benavrhm
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] More descriptive help text for usb_modeswitch
@ 2014-08-21 11:42 Jonathan Ben-Avraham
0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Ben-Avraham @ 2014-08-21 11:42 UTC (permalink / raw)
To: buildroot
Provides a fuller description of the USB_ModeSwitch functionality for the
benefit of the otherwise clueless.
Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
---
package/usb_modeswitch/Config.in | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/package/usb_modeswitch/Config.in b/package/usb_modeswitch/Config.in
index 5d8a6d2..8f7e7c9 100644
--- a/package/usb_modeswitch/Config.in
+++ b/package/usb_modeswitch/Config.in
@@ -3,8 +3,17 @@ config BR2_PACKAGE_USB_MODESWITCH
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
select BR2_PACKAGE_LIBUSB
help
- USB mode switcher.
- Used to switch mode on multiple-function devices
+ Some models of some USB devices such as modems and Wifi adapters
+ power-up in mass storage mode to provide access to drivers for the
+ device's application mode. USB_ModeSwitch changes the mode of such
+ devices from the initial power-up mode to the application mode.
+ Specific configuration data for each device model is required.
+
+ usb_modeswitch can be used with package usb_modeswitch_data and udev
+ for automatic mode switching when devices are connected.
+
+ For more information Internet search for "Virtual CD-ROM switching
+ utility".
http://www.draisberghof.de/usb_modeswitch/
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-08-21 13:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-08-20 18:04 [Buildroot] [PATCH] More descriptive help text for usb_modeswitch Jonathan Ben-Avraham
2014-08-21 10:14 ` Yann E. MORIN
2014-08-21 12:38 ` Jonathan Ben Avraham
2014-08-21 13:30 ` Thomas Petazzoni
2014-08-21 13:39 ` Jonathan Ben Avraham
2014-08-21 11:42 Jonathan Ben-Avraham
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.