* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 18:28 ` kernel test robot
0 siblings, 0 replies; 100+ messages in thread
From: kernel test robot @ 2017-02-24 18:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: LKP, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
linux-media-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 12042 bytes --]
Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit ff58d005cd10fcd372787cceac547e11cf706ff6
Merge: 5ab3566 9eeb0ed
Author: Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
AuthorDate: Tue Feb 21 16:58:32 2017 -0800
Commit: Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
CommitDate: Tue Feb 21 16:58:32 2017 -0800
Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
5ab356626f Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
9eeb0ed0f3 [media] mtk-vcodec: fix build warnings without DEBUG
ff58d005cd Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
+-------------------------------------------------------+------------+------------+------------+
| | 5ab356626f | 9eeb0ed0f3 | ff58d005cd |
+-------------------------------------------------------+------------+------------+------------+
| boot_successes | 261 | 237 | 0 |
| boot_failures | 5 | 0 | 26 |
| invoked_oom-killer:gfp_mask=0x | 1 | | |
| Mem-Info | 1 | | |
| Out_of_memory:Kill_process | 1 | | |
| IP-Config:Auto-configuration_of_network_failed | 4 | | |
| BUG:unable_to_handle_kernel | 0 | 0 | 26 |
| Oops | 0 | 0 | 26 |
| EIP:serial_ir_irq_handler | 0 | 0 | 26 |
| EIP:hardware_init_port | 0 | 0 | 26 |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 0 | 0 | 26 |
+-------------------------------------------------------+------------+------------+------------+
[ 4.660180] input: rc-core loopback device as /devices/virtual/rc/rc0/input5
[ 4.661186] evbug: Connected device: input5 (rc-core loopback device at rc-core/virtual)
[ 4.662435] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input6
[ 4.663793] evbug: Connected device: input6 (MCE IR Keyboard/Mouse (rc-loopback) at /input0)
[ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
[ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
[ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] *pde = 00000000
[ 4.666675]
[ 4.666675] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4.666675] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-02434-gff58d00 #1
[ 4.666675] task: c0068040 task.stack: c0064000
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] EFLAGS: 00210046 CPU: 0
[ 4.666675] EAX: 00000000 EBX: 00000000 ECX: 000000b0 EDX: 00000000
[ 4.666675] ESI: 000003f8 EDI: 00000101 EBP: c008df88 ESP: c008df44
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] CR0: 80050033 CR2: 0000039c CR3: 07ce1000 CR4: 001406d0
[ 4.666675] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 4.666675] DR6: fffe0ff0 DR7: 00000400
[ 4.666675] Call Trace:
[ 4.666675] <IRQ>
[ 4.666675] __handle_irq_event_percpu+0x57/0x100
[ 4.666675] ? handle_edge_irq+0x12/0x120
[ 4.666675] handle_irq_event_percpu+0x1d/0x50
[ 4.666675] handle_irq_event+0x32/0x60
[ 4.666675] handle_edge_irq+0xa5/0x120
[ 4.666675] ? handle_fasteoi_irq+0x150/0x150
[ 4.666675] handle_irq+0x9d/0xd0
[ 4.666675] </IRQ>
[ 4.666675] do_IRQ+0x5f/0x130
[ 4.666675] ? __this_cpu_preempt_check+0xf/0x20
[ 4.666675] common_interrupt+0x33/0x38
[ 4.666675] EIP: hardware_init_port+0x3f/0x190
[ 4.666675] EFLAGS: 00200246 CPU: 0
[ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
[ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] ? serial_ir_suspend+0x6f/0x90
[ 4.666675] ? parport_pc_pci_probe+0x1ab/0x250
[ 4.666675] serial_ir_probe+0xbb/0x300
[ 4.666675] platform_drv_probe+0x48/0xb0
[ 4.666675] driver_probe_device+0x161/0x500
[ 4.666675] ? acpi_driver_match_device+0x36/0x50
[ 4.666675] __device_attach_driver+0x77/0x110
[ 4.666675] ? klist_next+0x82/0xf0
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] bus_for_each_drv+0x47/0x80
[ 4.666675] __device_attach+0xb5/0x130
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] device_initial_probe+0xd/0x10
[ 4.666675] bus_probe_device+0x77/0x80
[ 4.666675] device_add+0x37e/0x5f0
[ 4.666675] ? kobject_set_name_vargs+0x6b/0x90
[ 4.666675] platform_device_add+0xfc/0x270
[ 4.666675] serial_ir_init_module+0xa6/0x269
[ 4.666675] ? gpio_ir_recv_driver_init+0x11/0x11
[ 4.666675] do_one_initcall+0x7e/0x121
[ 4.666675] ? kernel_init_freeable+0xec/0x188
[ 4.666675] kernel_init_freeable+0x10f/0x188
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] kernel_init+0xb/0x100
[ 4.666675] ? schedule_tail+0x20/0x80
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] ret_from_fork+0x21/0x2c
[ 4.666675] Code: 89 15 e4 0b 89 c8 84 db ba 02 00 00 00 74 08 8b 0d 2c 0c 89 c8 d3 e2 01 f2 ec 24 01 84 c0 0f 84 ce fe ff ff a1 e8 0b 89 c8 31 d2 <8b> 80 9c 03 00 00 e8 bc 80 73 ff 8b 15 c0 a8 ae c7 01 c2 b8 f0
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410 SS:ESP: 0068:c008df44
[ 4.666675] CR2: 000000000000039c
[ 4.666675] ---[ end trace a0c5674b0bbcdbb2 ]---
[ 4.666675] Kernel panic - not syncing: Fatal exception in interrupt
git bisect start 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 c470abd4fde40ea6a0846a2beab642a578c0b8cd --
git bisect bad b37df1eb72f0689451c40e1909e45dc10c699bd2 # 01:48 0- 4 Merge 'aaron/every-1G' into devel-catchup-201702240019
git bisect bad 875de500cd5b158290f677f7d97bcf4077aa1ae6 # 04:35 0- 9 Merge 'open-channel-ssd/pblk.latest' into devel-catchup-201702240019
git bisect good 73112164c8ee37d3b00cfe81ca31ba7834cec9a8 # 04:53 22+ 0 0day base guard for 'devel-catchup-201702240019'
git bisect bad 08eaa36283eaac37e5bfb9029bda8d5a2bf7eb9a # 11:32 0- 41 Merge 'linux-review/Matthias-Schiffer/vxlan-correctly-validate-VXLAN-ID-against-VXLAN_VID_MASK/20170223-233547' into devel-catchup-201702240019
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 11:47 0- 12 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 2bfe01eff4307409b95859e860261d0907149b61 # 13:00 22+ 2 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
git bisect good c9341ee0af4df0af8b727873ef851227345defed # 13:08 22+ 4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 17:56 22+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good c62d29c81736c6f3a6a9cc6ba2f5aad1cfa6afbc # 18:07 20+ 40 [media] si2168: implement ucb statistics
git bisect good 59e34ba82aebf75ea70508a114ada1ed3ca0df7c # 18:22 22+ 24 [media] tc358743: Do not read number of CSI lanes in use from chip
git bisect good 2b2d1d403343838401af029bd29b441a414beef3 # 18:37 22+ 24 [media] exynos4-is: Add missing 'of_node_put'
git bisect good 017c324242c2e9724938ef193ac6cb4ec5131778 # 19:23 22+ 91 [media] st-delta: EOS (End Of Stream) support
git bisect good bed6838f0113ba72c35f14f9027f1db713ab4188 # 20:04 22+ 26 [media] et8ek8: Fix compiler / Coccinelle warnings
git bisect good 3f190e3aec212fc8c61e202c51400afa7384d4bc # 20:20 20+ 22 [media] cxusb: Use a dma capable buffer also for reading
git bisect good 9165ba166cac5e8c9abda2012ea37cc3430c0b14 # 20:37 22+ 25 [media] usbtv: add sharpness control
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 20:48 22+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# first bad commit: [ff58d005cd10fcd372787cceac547e11cf706ff6] Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 21:01 62+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 21:25 63+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# extra tests with CONFIG_DEBUG_INFO_REDUCED
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 00:01 0- 45 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
# extra tests on HEAD of linux-devel/devel-catchup-201702240019
git bisect bad 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 # 00:01 0- 13 0day head guard for 'devel-catchup-201702240019'
# extra tests on tree/branch linus/master
git bisect bad f1ef09fde17f9b77ca1435a5b53a28b203afb81c # 00:14 0- 49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
# extra tests on tree/branch linux-next/master
git bisect bad 3e7350242c6f3d41d28e03418bd781cc1b7bad5f # 01:30 0- 14 Add linux-next specific files for 20170224
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/lkp Intel Corporation
[-- Attachment #2: dmesg-yocto-lkp-hsw01-72:20170224114241:i386-randconfig-h0-02232242:4.10.0-02434-gff58d00:1.gz --]
[-- Type: application/gzip, Size: 15116 bytes --]
[-- Attachment #3: dmesg-quantal-intel12-47:20170224131826:i386-randconfig-h0-02232242:4.10.0-02202-g5ab3566:3.gz --]
[-- Type: application/gzip, Size: 20965 bytes --]
[-- Attachment #4: reproduce-yocto-lkp-hsw01-72:20170224114241:i386-randconfig-h0-02232242:4.10.0-02434-gff58d00:1 --]
[-- Type: text/plain, Size: 899 bytes --]
#!/bin/bash
kernel=$1
initrd=yocto-trinity-i386.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd $initrd
-m 256
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw
drbd.minor_count=8
)
"${kvm[@]}" -append "${append[*]}"
[-- Attachment #5: config-4.10.0-02434-gff58d00 --]
[-- Type: text/plain, Size: 106394 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.10.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_MEMBARRIER is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=y
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
# CONFIG_CRC_PMIC_OPREGION is not set
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
# CONFIG_SFI is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
CONFIG_OLPC_XO15_SCI=y
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_X86_DMA_REMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_GRCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=y
# CONFIG_CAN_CC770_ISA is not set
# CONFIG_CAN_CC770_PLATFORM is not set
CONFIG_CAN_IFI_CANFD=y
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set
#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=y
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
# CONFIG_DST_CACHE is not set
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_PCI=y
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_HISI504=y
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_I40E is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA_BM is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_NET_SB1000=y
# CONFIG_PHYLIB is not set
CONFIG_MICREL_KS8995MA=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
CONFIG_PRISM54=y
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
CONFIG_FUJITSU_ES=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
# CONFIG_RMI4_F03 is not set
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_PCH_UART_CONSOLE is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
# CONFIG_PINCTRL_GEMINILAKE is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_STA2X11=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_UCB1400 is not set
# CONFIG_GPIO_WHISKEY_COVE is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_AXP20X_POWER=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_STA2X11=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RN5T618=y
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
CONFIG_IR_HIX5HD2=y
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_SPI is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=y
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
#
# Supported MMC/SDIO adapters
#
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7533=y
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SST_MFLD_PLATFORM=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_ACPI=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SST_ACPI=y
CONFIG_SND_SOC_INTEL_SST_MATCH=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS42L42=y
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES8328=y
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM179X=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5670=y
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8825=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID support
#
# CONFIG_HID is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_SMO8800=y
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_TC1100_WMI=y
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_ASUS_WIRELESS=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
CONFIG_INTEL_VBTN=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
CONFIG_XO1_RFKILL=y
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=y
CONFIG_INTEL_BXTWC_PMIC_TMU=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
# CONFIG_COMMON_CLK_MT2701_IMGSYS is not set
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_ARIZONA=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=y
CONFIG_AD7298=y
# CONFIG_AD7476 is not set
CONFIG_AD7766=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD799X=y
CONFIG_AXP288_ADC=y
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=y
CONFIG_LTC2485=y
CONFIG_MAX1027=y
CONFIG_MAX1363=y
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS8688=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=y
CONFIG_VZ89X=y
#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Counters
#
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
# CONFIG_AD5380 is not set
CONFIG_AD5421=y
CONFIG_AD5446=y
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
# CONFIG_AD5686 is not set
CONFIG_AD5755=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
# CONFIG_MAX30100 is not set
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_ISL29125=y
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
CONFIG_LTR501=y
CONFIG_MAX44000=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VEML6070=y
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
#
# Inclinometer sensors
#
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MAX5487=y
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
#
# Digital potentiostats
#
CONFIG_LMP91000=y
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
#
# Lightning sensors
#
CONFIG_AS3935=y
#
# Proximity sensors
#
CONFIG_LIDAR_LITE_V2=y
CONFIG_SX9500=y
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=y
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
# CONFIG_PWM_CRC is not set
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
CONFIG_UEFI_CPER=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_JFFS2_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_REFCOUNT is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_STACKDEPOT=y
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 18:28 ` kernel test robot
0 siblings, 0 replies; 100+ messages in thread
From: kernel test robot @ 2017-02-24 18:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: LKP, linux-input, linux-omap, kernel, linux-media,
linux-mediatek, linux-amlogic, linux-arm-kernel, devicetree,
linux-leds, linux-kernel, LKML, wfg
[-- Attachment #1: Type: text/plain, Size: 11984 bytes --]
Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit ff58d005cd10fcd372787cceac547e11cf706ff6
Merge: 5ab3566 9eeb0ed
Author: Linus Torvalds <torvalds@linux-foundation.org>
AuthorDate: Tue Feb 21 16:58:32 2017 -0800
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Tue Feb 21 16:58:32 2017 -0800
Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
5ab356626f Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
9eeb0ed0f3 [media] mtk-vcodec: fix build warnings without DEBUG
ff58d005cd Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
+-------------------------------------------------------+------------+------------+------------+
| | 5ab356626f | 9eeb0ed0f3 | ff58d005cd |
+-------------------------------------------------------+------------+------------+------------+
| boot_successes | 261 | 237 | 0 |
| boot_failures | 5 | 0 | 26 |
| invoked_oom-killer:gfp_mask=0x | 1 | | |
| Mem-Info | 1 | | |
| Out_of_memory:Kill_process | 1 | | |
| IP-Config:Auto-configuration_of_network_failed | 4 | | |
| BUG:unable_to_handle_kernel | 0 | 0 | 26 |
| Oops | 0 | 0 | 26 |
| EIP:serial_ir_irq_handler | 0 | 0 | 26 |
| EIP:hardware_init_port | 0 | 0 | 26 |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 0 | 0 | 26 |
+-------------------------------------------------------+------------+------------+------------+
[ 4.660180] input: rc-core loopback device as /devices/virtual/rc/rc0/input5
[ 4.661186] evbug: Connected device: input5 (rc-core loopback device at rc-core/virtual)
[ 4.662435] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input6
[ 4.663793] evbug: Connected device: input6 (MCE IR Keyboard/Mouse (rc-loopback) at /input0)
[ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
[ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
[ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] *pde = 00000000
[ 4.666675]
[ 4.666675] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4.666675] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-02434-gff58d00 #1
[ 4.666675] task: c0068040 task.stack: c0064000
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] EFLAGS: 00210046 CPU: 0
[ 4.666675] EAX: 00000000 EBX: 00000000 ECX: 000000b0 EDX: 00000000
[ 4.666675] ESI: 000003f8 EDI: 00000101 EBP: c008df88 ESP: c008df44
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] CR0: 80050033 CR2: 0000039c CR3: 07ce1000 CR4: 001406d0
[ 4.666675] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 4.666675] DR6: fffe0ff0 DR7: 00000400
[ 4.666675] Call Trace:
[ 4.666675] <IRQ>
[ 4.666675] __handle_irq_event_percpu+0x57/0x100
[ 4.666675] ? handle_edge_irq+0x12/0x120
[ 4.666675] handle_irq_event_percpu+0x1d/0x50
[ 4.666675] handle_irq_event+0x32/0x60
[ 4.666675] handle_edge_irq+0xa5/0x120
[ 4.666675] ? handle_fasteoi_irq+0x150/0x150
[ 4.666675] handle_irq+0x9d/0xd0
[ 4.666675] </IRQ>
[ 4.666675] do_IRQ+0x5f/0x130
[ 4.666675] ? __this_cpu_preempt_check+0xf/0x20
[ 4.666675] common_interrupt+0x33/0x38
[ 4.666675] EIP: hardware_init_port+0x3f/0x190
[ 4.666675] EFLAGS: 00200246 CPU: 0
[ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
[ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] ? serial_ir_suspend+0x6f/0x90
[ 4.666675] ? parport_pc_pci_probe+0x1ab/0x250
[ 4.666675] serial_ir_probe+0xbb/0x300
[ 4.666675] platform_drv_probe+0x48/0xb0
[ 4.666675] driver_probe_device+0x161/0x500
[ 4.666675] ? acpi_driver_match_device+0x36/0x50
[ 4.666675] __device_attach_driver+0x77/0x110
[ 4.666675] ? klist_next+0x82/0xf0
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] bus_for_each_drv+0x47/0x80
[ 4.666675] __device_attach+0xb5/0x130
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] device_initial_probe+0xd/0x10
[ 4.666675] bus_probe_device+0x77/0x80
[ 4.666675] device_add+0x37e/0x5f0
[ 4.666675] ? kobject_set_name_vargs+0x6b/0x90
[ 4.666675] platform_device_add+0xfc/0x270
[ 4.666675] serial_ir_init_module+0xa6/0x269
[ 4.666675] ? gpio_ir_recv_driver_init+0x11/0x11
[ 4.666675] do_one_initcall+0x7e/0x121
[ 4.666675] ? kernel_init_freeable+0xec/0x188
[ 4.666675] kernel_init_freeable+0x10f/0x188
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] kernel_init+0xb/0x100
[ 4.666675] ? schedule_tail+0x20/0x80
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] ret_from_fork+0x21/0x2c
[ 4.666675] Code: 89 15 e4 0b 89 c8 84 db ba 02 00 00 00 74 08 8b 0d 2c 0c 89 c8 d3 e2 01 f2 ec 24 01 84 c0 0f 84 ce fe ff ff a1 e8 0b 89 c8 31 d2 <8b> 80 9c 03 00 00 e8 bc 80 73 ff 8b 15 c0 a8 ae c7 01 c2 b8 f0
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410 SS:ESP: 0068:c008df44
[ 4.666675] CR2: 000000000000039c
[ 4.666675] ---[ end trace a0c5674b0bbcdbb2 ]---
[ 4.666675] Kernel panic - not syncing: Fatal exception in interrupt
git bisect start 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 c470abd4fde40ea6a0846a2beab642a578c0b8cd --
git bisect bad b37df1eb72f0689451c40e1909e45dc10c699bd2 # 01:48 0- 4 Merge 'aaron/every-1G' into devel-catchup-201702240019
git bisect bad 875de500cd5b158290f677f7d97bcf4077aa1ae6 # 04:35 0- 9 Merge 'open-channel-ssd/pblk.latest' into devel-catchup-201702240019
git bisect good 73112164c8ee37d3b00cfe81ca31ba7834cec9a8 # 04:53 22+ 0 0day base guard for 'devel-catchup-201702240019'
git bisect bad 08eaa36283eaac37e5bfb9029bda8d5a2bf7eb9a # 11:32 0- 41 Merge 'linux-review/Matthias-Schiffer/vxlan-correctly-validate-VXLAN-ID-against-VXLAN_VID_MASK/20170223-233547' into devel-catchup-201702240019
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 11:47 0- 12 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 2bfe01eff4307409b95859e860261d0907149b61 # 13:00 22+ 2 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
git bisect good c9341ee0af4df0af8b727873ef851227345defed # 13:08 22+ 4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 17:56 22+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good c62d29c81736c6f3a6a9cc6ba2f5aad1cfa6afbc # 18:07 20+ 40 [media] si2168: implement ucb statistics
git bisect good 59e34ba82aebf75ea70508a114ada1ed3ca0df7c # 18:22 22+ 24 [media] tc358743: Do not read number of CSI lanes in use from chip
git bisect good 2b2d1d403343838401af029bd29b441a414beef3 # 18:37 22+ 24 [media] exynos4-is: Add missing 'of_node_put'
git bisect good 017c324242c2e9724938ef193ac6cb4ec5131778 # 19:23 22+ 91 [media] st-delta: EOS (End Of Stream) support
git bisect good bed6838f0113ba72c35f14f9027f1db713ab4188 # 20:04 22+ 26 [media] et8ek8: Fix compiler / Coccinelle warnings
git bisect good 3f190e3aec212fc8c61e202c51400afa7384d4bc # 20:20 20+ 22 [media] cxusb: Use a dma capable buffer also for reading
git bisect good 9165ba166cac5e8c9abda2012ea37cc3430c0b14 # 20:37 22+ 25 [media] usbtv: add sharpness control
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 20:48 22+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# first bad commit: [ff58d005cd10fcd372787cceac547e11cf706ff6] Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 21:01 62+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 21:25 63+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# extra tests with CONFIG_DEBUG_INFO_REDUCED
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 00:01 0- 45 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
# extra tests on HEAD of linux-devel/devel-catchup-201702240019
git bisect bad 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 # 00:01 0- 13 0day head guard for 'devel-catchup-201702240019'
# extra tests on tree/branch linus/master
git bisect bad f1ef09fde17f9b77ca1435a5b53a28b203afb81c # 00:14 0- 49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
# extra tests on tree/branch linux-next/master
git bisect bad 3e7350242c6f3d41d28e03418bd781cc1b7bad5f # 01:30 0- 14 Add linux-next specific files for 20170224
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/lkp Intel Corporation
[-- Attachment #2: dmesg-yocto-lkp-hsw01-72:20170224114241:i386-randconfig-h0-02232242:4.10.0-02434-gff58d00:1.gz --]
[-- Type: application/gzip, Size: 15116 bytes --]
[-- Attachment #3: dmesg-quantal-intel12-47:20170224131826:i386-randconfig-h0-02232242:4.10.0-02202-g5ab3566:3.gz --]
[-- Type: application/gzip, Size: 20965 bytes --]
[-- Attachment #4: reproduce-yocto-lkp-hsw01-72:20170224114241:i386-randconfig-h0-02232242:4.10.0-02434-gff58d00:1 --]
[-- Type: text/plain, Size: 899 bytes --]
#!/bin/bash
kernel=$1
initrd=yocto-trinity-i386.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd $initrd
-m 256
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw
drbd.minor_count=8
)
"${kvm[@]}" -append "${append[*]}"
[-- Attachment #5: config-4.10.0-02434-gff58d00 --]
[-- Type: text/plain, Size: 106394 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.10.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_MEMBARRIER is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=y
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
# CONFIG_CRC_PMIC_OPREGION is not set
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
# CONFIG_SFI is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
CONFIG_OLPC_XO15_SCI=y
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_X86_DMA_REMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_GRCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=y
# CONFIG_CAN_CC770_ISA is not set
# CONFIG_CAN_CC770_PLATFORM is not set
CONFIG_CAN_IFI_CANFD=y
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set
#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=y
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
# CONFIG_DST_CACHE is not set
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_PCI=y
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_HISI504=y
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_I40E is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA_BM is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_NET_SB1000=y
# CONFIG_PHYLIB is not set
CONFIG_MICREL_KS8995MA=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
CONFIG_PRISM54=y
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
CONFIG_FUJITSU_ES=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
# CONFIG_RMI4_F03 is not set
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_PCH_UART_CONSOLE is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
# CONFIG_PINCTRL_GEMINILAKE is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_STA2X11=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_UCB1400 is not set
# CONFIG_GPIO_WHISKEY_COVE is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_AXP20X_POWER=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_STA2X11=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RN5T618=y
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
CONFIG_IR_HIX5HD2=y
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_SPI is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=y
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
#
# Supported MMC/SDIO adapters
#
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7533=y
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SST_MFLD_PLATFORM=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_ACPI=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SST_ACPI=y
CONFIG_SND_SOC_INTEL_SST_MATCH=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS42L42=y
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES8328=y
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM179X=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5670=y
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8825=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID support
#
# CONFIG_HID is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_SMO8800=y
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_TC1100_WMI=y
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_ASUS_WIRELESS=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
CONFIG_INTEL_VBTN=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
CONFIG_XO1_RFKILL=y
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=y
CONFIG_INTEL_BXTWC_PMIC_TMU=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
# CONFIG_COMMON_CLK_MT2701_IMGSYS is not set
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_ARIZONA=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=y
CONFIG_AD7298=y
# CONFIG_AD7476 is not set
CONFIG_AD7766=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD799X=y
CONFIG_AXP288_ADC=y
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=y
CONFIG_LTC2485=y
CONFIG_MAX1027=y
CONFIG_MAX1363=y
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS8688=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=y
CONFIG_VZ89X=y
#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Counters
#
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
# CONFIG_AD5380 is not set
CONFIG_AD5421=y
CONFIG_AD5446=y
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
# CONFIG_AD5686 is not set
CONFIG_AD5755=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
# CONFIG_MAX30100 is not set
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_ISL29125=y
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
CONFIG_LTR501=y
CONFIG_MAX44000=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VEML6070=y
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
#
# Inclinometer sensors
#
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MAX5487=y
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
#
# Digital potentiostats
#
CONFIG_LMP91000=y
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
#
# Lightning sensors
#
CONFIG_AS3935=y
#
# Proximity sensors
#
CONFIG_LIDAR_LITE_V2=y
CONFIG_SX9500=y
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=y
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
# CONFIG_PWM_CRC is not set
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
CONFIG_UEFI_CPER=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_JFFS2_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_REFCOUNT is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_STACKDEPOT=y
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 18:28 ` kernel test robot
0 siblings, 0 replies; 100+ messages in thread
From: kernel test robot @ 2017-02-24 18:28 UTC (permalink / raw)
To: linus-amlogic
Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit ff58d005cd10fcd372787cceac547e11cf706ff6
Merge: 5ab3566 9eeb0ed
Author: Linus Torvalds <torvalds@linux-foundation.org>
AuthorDate: Tue Feb 21 16:58:32 2017 -0800
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Tue Feb 21 16:58:32 2017 -0800
Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
5ab356626f Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
9eeb0ed0f3 [media] mtk-vcodec: fix build warnings without DEBUG
ff58d005cd Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
+-------------------------------------------------------+------------+------------+------------+
| | 5ab356626f | 9eeb0ed0f3 | ff58d005cd |
+-------------------------------------------------------+------------+------------+------------+
| boot_successes | 261 | 237 | 0 |
| boot_failures | 5 | 0 | 26 |
| invoked_oom-killer:gfp_mask=0x | 1 | | |
| Mem-Info | 1 | | |
| Out_of_memory:Kill_process | 1 | | |
| IP-Config:Auto-configuration_of_network_failed | 4 | | |
| BUG:unable_to_handle_kernel | 0 | 0 | 26 |
| Oops | 0 | 0 | 26 |
| EIP:serial_ir_irq_handler | 0 | 0 | 26 |
| EIP:hardware_init_port | 0 | 0 | 26 |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 0 | 0 | 26 |
+-------------------------------------------------------+------------+------------+------------+
[ 4.660180] input: rc-core loopback device as /devices/virtual/rc/rc0/input5
[ 4.661186] evbug: Connected device: input5 (rc-core loopback device at rc-core/virtual)
[ 4.662435] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input6
[ 4.663793] evbug: Connected device: input6 (MCE IR Keyboard/Mouse (rc-loopback) at /input0)
[ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
[ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
[ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] *pde = 00000000
[ 4.666675]
[ 4.666675] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4.666675] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-02434-gff58d00 #1
[ 4.666675] task: c0068040 task.stack: c0064000
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] EFLAGS: 00210046 CPU: 0
[ 4.666675] EAX: 00000000 EBX: 00000000 ECX: 000000b0 EDX: 00000000
[ 4.666675] ESI: 000003f8 EDI: 00000101 EBP: c008df88 ESP: c008df44
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] CR0: 80050033 CR2: 0000039c CR3: 07ce1000 CR4: 001406d0
[ 4.666675] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 4.666675] DR6: fffe0ff0 DR7: 00000400
[ 4.666675] Call Trace:
[ 4.666675] <IRQ>
[ 4.666675] __handle_irq_event_percpu+0x57/0x100
[ 4.666675] ? handle_edge_irq+0x12/0x120
[ 4.666675] handle_irq_event_percpu+0x1d/0x50
[ 4.666675] handle_irq_event+0x32/0x60
[ 4.666675] handle_edge_irq+0xa5/0x120
[ 4.666675] ? handle_fasteoi_irq+0x150/0x150
[ 4.666675] handle_irq+0x9d/0xd0
[ 4.666675] </IRQ>
[ 4.666675] do_IRQ+0x5f/0x130
[ 4.666675] ? __this_cpu_preempt_check+0xf/0x20
[ 4.666675] common_interrupt+0x33/0x38
[ 4.666675] EIP: hardware_init_port+0x3f/0x190
[ 4.666675] EFLAGS: 00200246 CPU: 0
[ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
[ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] ? serial_ir_suspend+0x6f/0x90
[ 4.666675] ? parport_pc_pci_probe+0x1ab/0x250
[ 4.666675] serial_ir_probe+0xbb/0x300
[ 4.666675] platform_drv_probe+0x48/0xb0
[ 4.666675] driver_probe_device+0x161/0x500
[ 4.666675] ? acpi_driver_match_device+0x36/0x50
[ 4.666675] __device_attach_driver+0x77/0x110
[ 4.666675] ? klist_next+0x82/0xf0
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] bus_for_each_drv+0x47/0x80
[ 4.666675] __device_attach+0xb5/0x130
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] device_initial_probe+0xd/0x10
[ 4.666675] bus_probe_device+0x77/0x80
[ 4.666675] device_add+0x37e/0x5f0
[ 4.666675] ? kobject_set_name_vargs+0x6b/0x90
[ 4.666675] platform_device_add+0xfc/0x270
[ 4.666675] serial_ir_init_module+0xa6/0x269
[ 4.666675] ? gpio_ir_recv_driver_init+0x11/0x11
[ 4.666675] do_one_initcall+0x7e/0x121
[ 4.666675] ? kernel_init_freeable+0xec/0x188
[ 4.666675] kernel_init_freeable+0x10f/0x188
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] kernel_init+0xb/0x100
[ 4.666675] ? schedule_tail+0x20/0x80
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] ret_from_fork+0x21/0x2c
[ 4.666675] Code: 89 15 e4 0b 89 c8 84 db ba 02 00 00 00 74 08 8b 0d 2c 0c 89 c8 d3 e2 01 f2 ec 24 01 84 c0 0f 84 ce fe ff ff a1 e8 0b 89 c8 31 d2 <8b> 80 9c 03 00 00 e8 bc 80 73 ff 8b 15 c0 a8 ae c7 01 c2 b8 f0
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410 SS:ESP: 0068:c008df44
[ 4.666675] CR2: 000000000000039c
[ 4.666675] ---[ end trace a0c5674b0bbcdbb2 ]---
[ 4.666675] Kernel panic - not syncing: Fatal exception in interrupt
git bisect start 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 c470abd4fde40ea6a0846a2beab642a578c0b8cd --
git bisect bad b37df1eb72f0689451c40e1909e45dc10c699bd2 # 01:48 0- 4 Merge 'aaron/every-1G' into devel-catchup-201702240019
git bisect bad 875de500cd5b158290f677f7d97bcf4077aa1ae6 # 04:35 0- 9 Merge 'open-channel-ssd/pblk.latest' into devel-catchup-201702240019
git bisect good 73112164c8ee37d3b00cfe81ca31ba7834cec9a8 # 04:53 22+ 0 0day base guard for 'devel-catchup-201702240019'
git bisect bad 08eaa36283eaac37e5bfb9029bda8d5a2bf7eb9a # 11:32 0- 41 Merge 'linux-review/Matthias-Schiffer/vxlan-correctly-validate-VXLAN-ID-against-VXLAN_VID_MASK/20170223-233547' into devel-catchup-201702240019
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 11:47 0- 12 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 2bfe01eff4307409b95859e860261d0907149b61 # 13:00 22+ 2 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
git bisect good c9341ee0af4df0af8b727873ef851227345defed # 13:08 22+ 4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 17:56 22+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good c62d29c81736c6f3a6a9cc6ba2f5aad1cfa6afbc # 18:07 20+ 40 [media] si2168: implement ucb statistics
git bisect good 59e34ba82aebf75ea70508a114ada1ed3ca0df7c # 18:22 22+ 24 [media] tc358743: Do not read number of CSI lanes in use from chip
git bisect good 2b2d1d403343838401af029bd29b441a414beef3 # 18:37 22+ 24 [media] exynos4-is: Add missing 'of_node_put'
git bisect good 017c324242c2e9724938ef193ac6cb4ec5131778 # 19:23 22+ 91 [media] st-delta: EOS (End Of Stream) support
git bisect good bed6838f0113ba72c35f14f9027f1db713ab4188 # 20:04 22+ 26 [media] et8ek8: Fix compiler / Coccinelle warnings
git bisect good 3f190e3aec212fc8c61e202c51400afa7384d4bc # 20:20 20+ 22 [media] cxusb: Use a dma capable buffer also for reading
git bisect good 9165ba166cac5e8c9abda2012ea37cc3430c0b14 # 20:37 22+ 25 [media] usbtv: add sharpness control
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 20:48 22+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# first bad commit: [ff58d005cd10fcd372787cceac547e11cf706ff6] Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 21:01 62+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 21:25 63+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# extra tests with CONFIG_DEBUG_INFO_REDUCED
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 00:01 0- 45 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
# extra tests on HEAD of linux-devel/devel-catchup-201702240019
git bisect bad 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 # 00:01 0- 13 0day head guard for 'devel-catchup-201702240019'
# extra tests on tree/branch linus/master
git bisect bad f1ef09fde17f9b77ca1435a5b53a28b203afb81c # 00:14 0- 49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
# extra tests on tree/branch linux-next/master
git bisect bad 3e7350242c6f3d41d28e03418bd781cc1b7bad5f # 01:30 0- 14 Add linux-next specific files for 20170224
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/lkp Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg-yocto-lkp-hsw01-72:20170224114241:i386-randconfig-h0-02232242:4.10.0-02434-gff58d00:1.gz
Type: application/gzip
Size: 15116 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20170225/5cfd5c2f/attachment.gz>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg-quantal-intel12-47:20170224131826:i386-randconfig-h0-02232242:4.10.0-02202-g5ab3566:3.gz
Type: application/gzip
Size: 20965 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20170225/5cfd5c2f/attachment-0001.gz>
-------------- next part --------------
#!/bin/bash
kernel=$1
initrd=yocto-trinity-i386.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd $initrd
-m 256
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw
drbd.minor_count=8
)
"${kvm[@]}" -append "${append[*]}"
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.10.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_MEMBARRIER is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=y
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
# CONFIG_CRC_PMIC_OPREGION is not set
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
# CONFIG_SFI is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
CONFIG_OLPC_XO15_SCI=y
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_X86_DMA_REMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_GRCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=y
# CONFIG_CAN_CC770_ISA is not set
# CONFIG_CAN_CC770_PLATFORM is not set
CONFIG_CAN_IFI_CANFD=y
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set
#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=y
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
# CONFIG_DST_CACHE is not set
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_PCI=y
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_HISI504=y
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_I40E is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA_BM is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_NET_SB1000=y
# CONFIG_PHYLIB is not set
CONFIG_MICREL_KS8995MA=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
CONFIG_PRISM54=y
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
CONFIG_FUJITSU_ES=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
# CONFIG_RMI4_F03 is not set
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_PCH_UART_CONSOLE is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
# CONFIG_PINCTRL_GEMINILAKE is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_STA2X11=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_UCB1400 is not set
# CONFIG_GPIO_WHISKEY_COVE is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_AXP20X_POWER=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_STA2X11=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RN5T618=y
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
CONFIG_IR_HIX5HD2=y
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_SPI is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=y
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
#
# Supported MMC/SDIO adapters
#
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7533=y
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SST_MFLD_PLATFORM=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_ACPI=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SST_ACPI=y
CONFIG_SND_SOC_INTEL_SST_MATCH=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS42L42=y
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES8328=y
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM179X=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5670=y
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8825=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID support
#
# CONFIG_HID is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_SMO8800=y
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_TC1100_WMI=y
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_ASUS_WIRELESS=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
CONFIG_INTEL_VBTN=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
CONFIG_XO1_RFKILL=y
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=y
CONFIG_INTEL_BXTWC_PMIC_TMU=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
# CONFIG_COMMON_CLK_MT2701_IMGSYS is not set
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_ARIZONA=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=y
CONFIG_AD7298=y
# CONFIG_AD7476 is not set
CONFIG_AD7766=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD799X=y
CONFIG_AXP288_ADC=y
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=y
CONFIG_LTC2485=y
CONFIG_MAX1027=y
CONFIG_MAX1363=y
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS8688=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=y
CONFIG_VZ89X=y
#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Counters
#
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
# CONFIG_AD5380 is not set
CONFIG_AD5421=y
CONFIG_AD5446=y
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
# CONFIG_AD5686 is not set
CONFIG_AD5755=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
# CONFIG_MAX30100 is not set
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_ISL29125=y
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
CONFIG_LTR501=y
CONFIG_MAX44000=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VEML6070=y
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
#
# Inclinometer sensors
#
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MAX5487=y
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
#
# Digital potentiostats
#
CONFIG_LMP91000=y
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
#
# Lightning sensors
#
CONFIG_AS3935=y
#
# Proximity sensors
#
CONFIG_LIDAR_LITE_V2=y
CONFIG_SX9500=y
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=y
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
# CONFIG_PWM_CRC is not set
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
CONFIG_UEFI_CPER=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_JFFS2_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_REFCOUNT is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_STACKDEPOT=y
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 18:28 ` kernel test robot
0 siblings, 0 replies; 100+ messages in thread
From: kernel test robot @ 2017-02-24 18:28 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 12166 bytes --]
Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit ff58d005cd10fcd372787cceac547e11cf706ff6
Merge: 5ab3566 9eeb0ed
Author: Linus Torvalds <torvalds@linux-foundation.org>
AuthorDate: Tue Feb 21 16:58:32 2017 -0800
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Tue Feb 21 16:58:32 2017 -0800
Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
5ab356626f Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
9eeb0ed0f3 [media] mtk-vcodec: fix build warnings without DEBUG
ff58d005cd Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
+-------------------------------------------------------+------------+------------+------------+
| | 5ab356626f | 9eeb0ed0f3 | ff58d005cd |
+-------------------------------------------------------+------------+------------+------------+
| boot_successes | 261 | 237 | 0 |
| boot_failures | 5 | 0 | 26 |
| invoked_oom-killer:gfp_mask=0x | 1 | | |
| Mem-Info | 1 | | |
| Out_of_memory:Kill_process | 1 | | |
| IP-Config:Auto-configuration_of_network_failed | 4 | | |
| BUG:unable_to_handle_kernel | 0 | 0 | 26 |
| Oops | 0 | 0 | 26 |
| EIP:serial_ir_irq_handler | 0 | 0 | 26 |
| EIP:hardware_init_port | 0 | 0 | 26 |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 0 | 0 | 26 |
+-------------------------------------------------------+------------+------------+------------+
[ 4.660180] input: rc-core loopback device as /devices/virtual/rc/rc0/input5
[ 4.661186] evbug: Connected device: input5 (rc-core loopback device at rc-core/virtual)
[ 4.662435] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input6
[ 4.663793] evbug: Connected device: input6 (MCE IR Keyboard/Mouse (rc-loopback) at /input0)
[ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
[ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
[ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] *pde = 00000000
[ 4.666675]
[ 4.666675] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4.666675] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-02434-gff58d00 #1
[ 4.666675] task: c0068040 task.stack: c0064000
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
[ 4.666675] EFLAGS: 00210046 CPU: 0
[ 4.666675] EAX: 00000000 EBX: 00000000 ECX: 000000b0 EDX: 00000000
[ 4.666675] ESI: 000003f8 EDI: 00000101 EBP: c008df88 ESP: c008df44
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] CR0: 80050033 CR2: 0000039c CR3: 07ce1000 CR4: 001406d0
[ 4.666675] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 4.666675] DR6: fffe0ff0 DR7: 00000400
[ 4.666675] Call Trace:
[ 4.666675] <IRQ>
[ 4.666675] __handle_irq_event_percpu+0x57/0x100
[ 4.666675] ? handle_edge_irq+0x12/0x120
[ 4.666675] handle_irq_event_percpu+0x1d/0x50
[ 4.666675] handle_irq_event+0x32/0x60
[ 4.666675] handle_edge_irq+0xa5/0x120
[ 4.666675] ? handle_fasteoi_irq+0x150/0x150
[ 4.666675] handle_irq+0x9d/0xd0
[ 4.666675] </IRQ>
[ 4.666675] do_IRQ+0x5f/0x130
[ 4.666675] ? __this_cpu_preempt_check+0xf/0x20
[ 4.666675] common_interrupt+0x33/0x38
[ 4.666675] EIP: hardware_init_port+0x3f/0x190
[ 4.666675] EFLAGS: 00200246 CPU: 0
[ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
[ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
[ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 4.666675] ? serial_ir_suspend+0x6f/0x90
[ 4.666675] ? parport_pc_pci_probe+0x1ab/0x250
[ 4.666675] serial_ir_probe+0xbb/0x300
[ 4.666675] platform_drv_probe+0x48/0xb0
[ 4.666675] driver_probe_device+0x161/0x500
[ 4.666675] ? acpi_driver_match_device+0x36/0x50
[ 4.666675] __device_attach_driver+0x77/0x110
[ 4.666675] ? klist_next+0x82/0xf0
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] bus_for_each_drv+0x47/0x80
[ 4.666675] __device_attach+0xb5/0x130
[ 4.666675] ? __driver_attach+0xf0/0xf0
[ 4.666675] device_initial_probe+0xd/0x10
[ 4.666675] bus_probe_device+0x77/0x80
[ 4.666675] device_add+0x37e/0x5f0
[ 4.666675] ? kobject_set_name_vargs+0x6b/0x90
[ 4.666675] platform_device_add+0xfc/0x270
[ 4.666675] serial_ir_init_module+0xa6/0x269
[ 4.666675] ? gpio_ir_recv_driver_init+0x11/0x11
[ 4.666675] do_one_initcall+0x7e/0x121
[ 4.666675] ? kernel_init_freeable+0xec/0x188
[ 4.666675] kernel_init_freeable+0x10f/0x188
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] kernel_init+0xb/0x100
[ 4.666675] ? schedule_tail+0x20/0x80
[ 4.666675] ? rest_init+0x110/0x110
[ 4.666675] ret_from_fork+0x21/0x2c
[ 4.666675] Code: 89 15 e4 0b 89 c8 84 db ba 02 00 00 00 74 08 8b 0d 2c 0c 89 c8 d3 e2 01 f2 ec 24 01 84 c0 0f 84 ce fe ff ff a1 e8 0b 89 c8 31 d2 <8b> 80 9c 03 00 00 e8 bc 80 73 ff 8b 15 c0 a8 ae c7 01 c2 b8 f0
[ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410 SS:ESP: 0068:c008df44
[ 4.666675] CR2: 000000000000039c
[ 4.666675] ---[ end trace a0c5674b0bbcdbb2 ]---
[ 4.666675] Kernel panic - not syncing: Fatal exception in interrupt
git bisect start 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 c470abd4fde40ea6a0846a2beab642a578c0b8cd --
git bisect bad b37df1eb72f0689451c40e1909e45dc10c699bd2 # 01:48 0- 4 Merge 'aaron/every-1G' into devel-catchup-201702240019
git bisect bad 875de500cd5b158290f677f7d97bcf4077aa1ae6 # 04:35 0- 9 Merge 'open-channel-ssd/pblk.latest' into devel-catchup-201702240019
git bisect good 73112164c8ee37d3b00cfe81ca31ba7834cec9a8 # 04:53 22+ 0 0day base guard for 'devel-catchup-201702240019'
git bisect bad 08eaa36283eaac37e5bfb9029bda8d5a2bf7eb9a # 11:32 0- 41 Merge 'linux-review/Matthias-Schiffer/vxlan-correctly-validate-VXLAN-ID-against-VXLAN_VID_MASK/20170223-233547' into devel-catchup-201702240019
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 11:47 0- 12 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 2bfe01eff4307409b95859e860261d0907149b61 # 13:00 22+ 2 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
git bisect good c9341ee0af4df0af8b727873ef851227345defed # 13:08 22+ 4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 17:56 22+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good c62d29c81736c6f3a6a9cc6ba2f5aad1cfa6afbc # 18:07 20+ 40 [media] si2168: implement ucb statistics
git bisect good 59e34ba82aebf75ea70508a114ada1ed3ca0df7c # 18:22 22+ 24 [media] tc358743: Do not read number of CSI lanes in use from chip
git bisect good 2b2d1d403343838401af029bd29b441a414beef3 # 18:37 22+ 24 [media] exynos4-is: Add missing 'of_node_put'
git bisect good 017c324242c2e9724938ef193ac6cb4ec5131778 # 19:23 22+ 91 [media] st-delta: EOS (End Of Stream) support
git bisect good bed6838f0113ba72c35f14f9027f1db713ab4188 # 20:04 22+ 26 [media] et8ek8: Fix compiler / Coccinelle warnings
git bisect good 3f190e3aec212fc8c61e202c51400afa7384d4bc # 20:20 20+ 22 [media] cxusb: Use a dma capable buffer also for reading
git bisect good 9165ba166cac5e8c9abda2012ea37cc3430c0b14 # 20:37 22+ 25 [media] usbtv: add sharpness control
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 20:48 22+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# first bad commit: [ff58d005cd10fcd372787cceac547e11cf706ff6] Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
git bisect good 5ab356626f3cf97f00280f17a52e4b5b4a13e038 # 21:01 62+ 5 Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
git bisect good 9eeb0ed0f30938f31a3d9135a88b9502192c18dd # 21:25 63+ 0 [media] mtk-vcodec: fix build warnings without DEBUG
# extra tests with CONFIG_DEBUG_INFO_REDUCED
git bisect bad ff58d005cd10fcd372787cceac547e11cf706ff6 # 00:01 0- 45 Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
# extra tests on HEAD of linux-devel/devel-catchup-201702240019
git bisect bad 4d6e6d452fb216ac03fbd5bd2cd2ecbecaef6160 # 00:01 0- 13 0day head guard for 'devel-catchup-201702240019'
# extra tests on tree/branch linus/master
git bisect bad f1ef09fde17f9b77ca1435a5b53a28b203afb81c # 00:14 0- 49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
# extra tests on tree/branch linux-next/master
git bisect bad 3e7350242c6f3d41d28e03418bd781cc1b7bad5f # 01:30 0- 14 Add linux-next specific files for 20170224
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/lkp Intel Corporation
[-- Attachment #2: 1.gz --]
[-- Type: application/gzip, Size: 15116 bytes --]
[-- Attachment #3: 3.gz --]
[-- Type: application/gzip, Size: 20965 bytes --]
[-- Attachment #4: 4.10.0-02434-gff58d001 --]
[-- Type: text/plain, Size: 899 bytes --]
#!/bin/bash
kernel=$1
initrd=yocto-trinity-i386.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd $initrd
-m 256
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw
drbd.minor_count=8
)
"${kvm[@]}" -append "${append[*]}"
[-- Attachment #5: config-4.10.0-02434-gff58d00 --]
[-- Type: text/plain, Size: 106394 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.10.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_MEMBARRIER is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=y
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
# CONFIG_CRC_PMIC_OPREGION is not set
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
# CONFIG_SFI is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
CONFIG_OLPC_XO15_SCI=y
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_X86_DMA_REMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_GRCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=y
# CONFIG_CAN_CC770_ISA is not set
# CONFIG_CAN_CC770_PLATFORM is not set
CONFIG_CAN_IFI_CANFD=y
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set
#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=y
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
# CONFIG_DST_CACHE is not set
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_PCI=y
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_HISI504=y
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_I40E is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA_BM is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_NET_SB1000=y
# CONFIG_PHYLIB is not set
CONFIG_MICREL_KS8995MA=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
CONFIG_PRISM54=y
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
CONFIG_FUJITSU_ES=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
# CONFIG_RMI4_F03 is not set
# CONFIG_RMI4_F11 is not set
# CONFIG_RMI4_F12 is not set
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_PCH_UART_CONSOLE is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
# CONFIG_PINCTRL_GEMINILAKE is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_STA2X11=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_UCB1400 is not set
# CONFIG_GPIO_WHISKEY_COVE is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_AXP20X_POWER=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_STA2X11=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RN5T618=y
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
CONFIG_IR_HIX5HD2=y
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_SPI is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=y
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
#
# Supported MMC/SDIO adapters
#
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7533=y
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SST_MFLD_PLATFORM=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_ACPI=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SST_ACPI=y
CONFIG_SND_SOC_INTEL_SST_MATCH=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS42L42=y
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES8328=y
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM179X=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5670=y
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8825=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID support
#
# CONFIG_HID is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_NET48XX=y
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_SMO8800=y
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_TC1100_WMI=y
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_ASUS_WIRELESS=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
CONFIG_INTEL_VBTN=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
CONFIG_XO1_RFKILL=y
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=y
CONFIG_INTEL_BXTWC_PMIC_TMU=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_MLX_CPLD_PLATFORM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
# CONFIG_COMMON_CLK_MT2701_IMGSYS is not set
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_ARIZONA=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=y
CONFIG_AD7298=y
# CONFIG_AD7476 is not set
CONFIG_AD7766=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD799X=y
CONFIG_AXP288_ADC=y
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=y
CONFIG_LTC2485=y
CONFIG_MAX1027=y
CONFIG_MAX1363=y
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS8688=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=y
CONFIG_VZ89X=y
#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Counters
#
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
# CONFIG_AD5380 is not set
CONFIG_AD5421=y
CONFIG_AD5446=y
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
# CONFIG_AD5686 is not set
CONFIG_AD5755=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
# CONFIG_MAX30100 is not set
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_ISL29125=y
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
CONFIG_LTR501=y
CONFIG_MAX44000=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VEML6070=y
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
#
# Inclinometer sensors
#
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Digital potentiometers
#
CONFIG_DS1803=y
CONFIG_MAX5487=y
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
#
# Digital potentiostats
#
CONFIG_LMP91000=y
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
#
# Lightning sensors
#
CONFIG_AS3935=y
#
# Proximity sensors
#
CONFIG_LIDAR_LITE_V2=y
CONFIG_SX9500=y
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=y
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
# CONFIG_PWM_CRC is not set
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
CONFIG_UEFI_CPER=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_JFFS2_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_REFCOUNT is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
CONFIG_MEMTEST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_STACKDEPOT=y
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-24 18:28 ` kernel test robot
` (2 preceding siblings ...)
(?)
@ 2017-02-24 19:15 ` Linus Torvalds
-1 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-24 19:15 UTC (permalink / raw)
To: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Sean Young, Ruslan Ruslichenko
Cc: LKP, linux-input, linux-omap, kernel, Linux Media Mailing List,
linux-mediatek, linux-amlogic, linux-arm-kernel, devicetree,
Linux LED Subsystem, LKML, wfg
Added more relevant people. I've debugged the immediate problem below,
but I think there's another problem that actually triggered this.
On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
<fengguang.wu@intel.com> wrote:
>
> 0day kernel testing robot got the below dmesg and the first bad commit is
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>
> commit ff58d005cd10fcd372787cceac547e11cf706ff6
> Merge: 5ab3566 9eeb0ed
>
> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
[...]
> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
This merge being fingered ends up being a subtle interaction with other changes.
Those "other changes" are (again) the interrupt retrigger code that
was reverted for 4.10, and then we tried to merge them again this
merge window.
Because the immediate cause is:
> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> [ 4.666675] Call Trace:
> [ 4.666675] <IRQ>
> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> [ 4.666675] handle_irq_event+0x32/0x60
> [ 4.666675] handle_edge_irq+0xa5/0x120
> [ 4.666675] handle_irq+0x9d/0xd0
> [ 4.666675] </IRQ>
> [ 4.666675] do_IRQ+0x5f/0x130
> [ 4.666675] common_interrupt+0x33/0x38
> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> [ 4.666675] EFLAGS: 00200246 CPU: 0
> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 4.666675] serial_ir_probe+0xbb/0x300
> [ 4.666675] platform_drv_probe+0x48/0xb0
...
ie an interrupt came in immediately after the request_irq(), before
all the data was properly set up, which then causes the interrupt
handler to take a fault because it tries to access some field that
hasn't even been set up yet.
The code line is helpful, the faulting instruction is
mov 0x39c(%rax),%eax <--- fault
call ..
mov someglobalvar,%edx
which together with the supplied config file makes me able to match it
up with the assembly generation around it:
inb %dx, %al # tmp254, value
andb $1, %al #, tmp255
testb %al, %al # tmp255
je .L233 #,
.L215:
movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
xorl %edx, %edx # _66->timeout
movl 924(%eax), %eax # _66->timeout, _66->timeout
call nsecs_to_jiffies #
movl jiffies, %edx # jiffies, jiffies.33_70
addl %eax, %edx # _69, tmp259
movl $serial_ir+16, %eax #,
call mod_timer #
movl serial_ir+8, %eax # serial_ir.rcdev,
call ir_raw_event_handle #
movl $1, %eax #, <retval>
so it's that "serial_ir.rcdev->timeout" access that faults. So this is
the faulting source code:
drivers/media/rc/serial_ir.c: 402
mod_timer(&serial_ir.timeout_timer,
jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
ir_raw_event_handle(serial_ir.rcdev);
return IRQ_HANDLED;
and serial_ir.rcdev is NULL when ti tries to look up the timeout.
That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
generate timeout") and *that* is the actual new bug.
Looking at the code, that serial_ir.rcdev thing is initialized fairly
late in serial_ir_init_module(), while the interrupt is allocated
early in serial_ir_probe(), which is done _early_ in
serial_ir_init_module():
serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
serial_ir_probe -> devm_request_irq
Mauro, Sean, please fix.
Anyway, this is clearly a bug in the serial_ir code, but it is *also*
once again clearly now being *triggered* due to the irq handling
changes.
I'm pretty sure that the thing that triggered this is once more commit
a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
callback") which seems to retrigger stale irqs that simply should not
be retriggered.
They aren't actually active any more, if they ever were.
So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
good for testing, but not good for actual users.
I the local APIC retrigger just unconditionally resends that irq. But
it's the core interrupt code that decides to retrigger it incorrectly
for some reason.
Why is IRQS_PENDING set for that thing? Something must have almost
certainly set it, despite the irq not actually having ever been
pending. Thomas?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 19:15 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-24 19:15 UTC (permalink / raw)
To: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Sean Young, Ruslan Ruslichenko
Cc: LKP, linux-input, linux-omap, kernel, Linux Media Mailing List,
linux-mediatek, linux-amlogic, linux-arm-kernel, devicetree,
Linux LED Subsystem, LKML, wfg
Added more relevant people. I've debugged the immediate problem below,
but I think there's another problem that actually triggered this.
On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
<fengguang.wu@intel.com> wrote:
>
> 0day kernel testing robot got the below dmesg and the first bad commit is
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>
> commit ff58d005cd10fcd372787cceac547e11cf706ff6
> Merge: 5ab3566 9eeb0ed
>
> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
[...]
> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
This merge being fingered ends up being a subtle interaction with other changes.
Those "other changes" are (again) the interrupt retrigger code that
was reverted for 4.10, and then we tried to merge them again this
merge window.
Because the immediate cause is:
> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> [ 4.666675] Call Trace:
> [ 4.666675] <IRQ>
> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> [ 4.666675] handle_irq_event+0x32/0x60
> [ 4.666675] handle_edge_irq+0xa5/0x120
> [ 4.666675] handle_irq+0x9d/0xd0
> [ 4.666675] </IRQ>
> [ 4.666675] do_IRQ+0x5f/0x130
> [ 4.666675] common_interrupt+0x33/0x38
> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> [ 4.666675] EFLAGS: 00200246 CPU: 0
> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 4.666675] serial_ir_probe+0xbb/0x300
> [ 4.666675] platform_drv_probe+0x48/0xb0
...
ie an interrupt came in immediately after the request_irq(), before
all the data was properly set up, which then causes the interrupt
handler to take a fault because it tries to access some field that
hasn't even been set up yet.
The code line is helpful, the faulting instruction is
mov 0x39c(%rax),%eax <--- fault
call ..
mov someglobalvar,%edx
which together with the supplied config file makes me able to match it
up with the assembly generation around it:
inb %dx, %al # tmp254, value
andb $1, %al #, tmp255
testb %al, %al # tmp255
je .L233 #,
.L215:
movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
xorl %edx, %edx # _66->timeout
movl 924(%eax), %eax # _66->timeout, _66->timeout
call nsecs_to_jiffies #
movl jiffies, %edx # jiffies, jiffies.33_70
addl %eax, %edx # _69, tmp259
movl $serial_ir+16, %eax #,
call mod_timer #
movl serial_ir+8, %eax # serial_ir.rcdev,
call ir_raw_event_handle #
movl $1, %eax #, <retval>
so it's that "serial_ir.rcdev->timeout" access that faults. So this is
the faulting source code:
drivers/media/rc/serial_ir.c: 402
mod_timer(&serial_ir.timeout_timer,
jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
ir_raw_event_handle(serial_ir.rcdev);
return IRQ_HANDLED;
and serial_ir.rcdev is NULL when ti tries to look up the timeout.
That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
generate timeout") and *that* is the actual new bug.
Looking at the code, that serial_ir.rcdev thing is initialized fairly
late in serial_ir_init_module(), while the interrupt is allocated
early in serial_ir_probe(), which is done _early_ in
serial_ir_init_module():
serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
serial_ir_probe -> devm_request_irq
Mauro, Sean, please fix.
Anyway, this is clearly a bug in the serial_ir code, but it is *also*
once again clearly now being *triggered* due to the irq handling
changes.
I'm pretty sure that the thing that triggered this is once more commit
a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
callback") which seems to retrigger stale irqs that simply should not
be retriggered.
They aren't actually active any more, if they ever were.
So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
good for testing, but not good for actual users.
I the local APIC retrigger just unconditionally resends that irq. But
it's the core interrupt code that decides to retrigger it incorrectly
for some reason.
Why is IRQS_PENDING set for that thing? Something must have almost
certainly set it, despite the irq not actually having ever been
pending. Thomas?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 19:15 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-24 19:15 UTC (permalink / raw)
To: linux-arm-kernel
Added more relevant people. I've debugged the immediate problem below,
but I think there's another problem that actually triggered this.
On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
<fengguang.wu@intel.com> wrote:
>
> 0day kernel testing robot got the below dmesg and the first bad commit is
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>
> commit ff58d005cd10fcd372787cceac547e11cf706ff6
> Merge: 5ab3566 9eeb0ed
>
> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
[...]
> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
This merge being fingered ends up being a subtle interaction with other changes.
Those "other changes" are (again) the interrupt retrigger code that
was reverted for 4.10, and then we tried to merge them again this
merge window.
Because the immediate cause is:
> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> [ 4.666675] Call Trace:
> [ 4.666675] <IRQ>
> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> [ 4.666675] handle_irq_event+0x32/0x60
> [ 4.666675] handle_edge_irq+0xa5/0x120
> [ 4.666675] handle_irq+0x9d/0xd0
> [ 4.666675] </IRQ>
> [ 4.666675] do_IRQ+0x5f/0x130
> [ 4.666675] common_interrupt+0x33/0x38
> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> [ 4.666675] EFLAGS: 00200246 CPU: 0
> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 4.666675] serial_ir_probe+0xbb/0x300
> [ 4.666675] platform_drv_probe+0x48/0xb0
...
ie an interrupt came in immediately after the request_irq(), before
all the data was properly set up, which then causes the interrupt
handler to take a fault because it tries to access some field that
hasn't even been set up yet.
The code line is helpful, the faulting instruction is
mov 0x39c(%rax),%eax <--- fault
call ..
mov someglobalvar,%edx
which together with the supplied config file makes me able to match it
up with the assembly generation around it:
inb %dx, %al # tmp254, value
andb $1, %al #, tmp255
testb %al, %al # tmp255
je .L233 #,
.L215:
movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
xorl %edx, %edx # _66->timeout
movl 924(%eax), %eax # _66->timeout, _66->timeout
call nsecs_to_jiffies #
movl jiffies, %edx # jiffies, jiffies.33_70
addl %eax, %edx # _69, tmp259
movl $serial_ir+16, %eax #,
call mod_timer #
movl serial_ir+8, %eax # serial_ir.rcdev,
call ir_raw_event_handle #
movl $1, %eax #, <retval>
so it's that "serial_ir.rcdev->timeout" access that faults. So this is
the faulting source code:
drivers/media/rc/serial_ir.c: 402
mod_timer(&serial_ir.timeout_timer,
jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
ir_raw_event_handle(serial_ir.rcdev);
return IRQ_HANDLED;
and serial_ir.rcdev is NULL when ti tries to look up the timeout.
That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
generate timeout") and *that* is the actual new bug.
Looking at the code, that serial_ir.rcdev thing is initialized fairly
late in serial_ir_init_module(), while the interrupt is allocated
early in serial_ir_probe(), which is done _early_ in
serial_ir_init_module():
serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
serial_ir_probe -> devm_request_irq
Mauro, Sean, please fix.
Anyway, this is clearly a bug in the serial_ir code, but it is *also*
once again clearly now being *triggered* due to the irq handling
changes.
I'm pretty sure that the thing that triggered this is once more commit
a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
callback") which seems to retrigger stale irqs that simply should not
be retriggered.
They aren't actually active any more, if they ever were.
So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
good for testing, but not good for actual users.
I the local APIC retrigger just unconditionally resends that irq. But
it's the core interrupt code that decides to retrigger it incorrectly
for some reason.
Why is IRQS_PENDING set for that thing? Something must have almost
certainly set it, despite the irq not actually having ever been
pending. Thomas?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 19:15 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-24 19:15 UTC (permalink / raw)
To: linus-amlogic
Added more relevant people. I've debugged the immediate problem below,
but I think there's another problem that actually triggered this.
On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
<fengguang.wu@intel.com> wrote:
>
> 0day kernel testing robot got the below dmesg and the first bad commit is
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>
> commit ff58d005cd10fcd372787cceac547e11cf706ff6
> Merge: 5ab3566 9eeb0ed
>
> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
[...]
> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
This merge being fingered ends up being a subtle interaction with other changes.
Those "other changes" are (again) the interrupt retrigger code that
was reverted for 4.10, and then we tried to merge them again this
merge window.
Because the immediate cause is:
> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> [ 4.666675] Call Trace:
> [ 4.666675] <IRQ>
> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> [ 4.666675] handle_irq_event+0x32/0x60
> [ 4.666675] handle_edge_irq+0xa5/0x120
> [ 4.666675] handle_irq+0x9d/0xd0
> [ 4.666675] </IRQ>
> [ 4.666675] do_IRQ+0x5f/0x130
> [ 4.666675] common_interrupt+0x33/0x38
> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> [ 4.666675] EFLAGS: 00200246 CPU: 0
> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 4.666675] serial_ir_probe+0xbb/0x300
> [ 4.666675] platform_drv_probe+0x48/0xb0
...
ie an interrupt came in immediately after the request_irq(), before
all the data was properly set up, which then causes the interrupt
handler to take a fault because it tries to access some field that
hasn't even been set up yet.
The code line is helpful, the faulting instruction is
mov 0x39c(%rax),%eax <--- fault
call ..
mov someglobalvar,%edx
which together with the supplied config file makes me able to match it
up with the assembly generation around it:
inb %dx, %al # tmp254, value
andb $1, %al #, tmp255
testb %al, %al # tmp255
je .L233 #,
.L215:
movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
xorl %edx, %edx # _66->timeout
movl 924(%eax), %eax # _66->timeout, _66->timeout
call nsecs_to_jiffies #
movl jiffies, %edx # jiffies, jiffies.33_70
addl %eax, %edx # _69, tmp259
movl $serial_ir+16, %eax #,
call mod_timer #
movl serial_ir+8, %eax # serial_ir.rcdev,
call ir_raw_event_handle #
movl $1, %eax #, <retval>
so it's that "serial_ir.rcdev->timeout" access that faults. So this is
the faulting source code:
drivers/media/rc/serial_ir.c: 402
mod_timer(&serial_ir.timeout_timer,
jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
ir_raw_event_handle(serial_ir.rcdev);
return IRQ_HANDLED;
and serial_ir.rcdev is NULL when ti tries to look up the timeout.
That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
generate timeout") and *that* is the actual new bug.
Looking at the code, that serial_ir.rcdev thing is initialized fairly
late in serial_ir_init_module(), while the interrupt is allocated
early in serial_ir_probe(), which is done _early_ in
serial_ir_init_module():
serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
serial_ir_probe -> devm_request_irq
Mauro, Sean, please fix.
Anyway, this is clearly a bug in the serial_ir code, but it is *also*
once again clearly now being *triggered* due to the irq handling
changes.
I'm pretty sure that the thing that triggered this is once more commit
a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
callback") which seems to retrigger stale irqs that simply should not
be retriggered.
They aren't actually active any more, if they ever were.
So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
good for testing, but not good for actual users.
I the local APIC retrigger just unconditionally resends that irq. But
it's the core interrupt code that decides to retrigger it incorrectly
for some reason.
Why is IRQS_PENDING set for that thing? Something must have almost
certainly set it, despite the irq not actually having ever been
pending. Thomas?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-24 19:15 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-24 19:15 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 4971 bytes --]
Added more relevant people. I've debugged the immediate problem below,
but I think there's another problem that actually triggered this.
On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
<fengguang.wu@intel.com> wrote:
>
> 0day kernel testing robot got the below dmesg and the first bad commit is
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>
> commit ff58d005cd10fcd372787cceac547e11cf706ff6
> Merge: 5ab3566 9eeb0ed
>
> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
[...]
> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
This merge being fingered ends up being a subtle interaction with other changes.
Those "other changes" are (again) the interrupt retrigger code that
was reverted for 4.10, and then we tried to merge them again this
merge window.
Because the immediate cause is:
> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> [ 4.666675] Call Trace:
> [ 4.666675] <IRQ>
> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> [ 4.666675] handle_irq_event+0x32/0x60
> [ 4.666675] handle_edge_irq+0xa5/0x120
> [ 4.666675] handle_irq+0x9d/0xd0
> [ 4.666675] </IRQ>
> [ 4.666675] do_IRQ+0x5f/0x130
> [ 4.666675] common_interrupt+0x33/0x38
> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> [ 4.666675] EFLAGS: 00200246 CPU: 0
> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 4.666675] serial_ir_probe+0xbb/0x300
> [ 4.666675] platform_drv_probe+0x48/0xb0
...
ie an interrupt came in immediately after the request_irq(), before
all the data was properly set up, which then causes the interrupt
handler to take a fault because it tries to access some field that
hasn't even been set up yet.
The code line is helpful, the faulting instruction is
mov 0x39c(%rax),%eax <--- fault
call ..
mov someglobalvar,%edx
which together with the supplied config file makes me able to match it
up with the assembly generation around it:
inb %dx, %al # tmp254, value
andb $1, %al #, tmp255
testb %al, %al # tmp255
je .L233 #,
.L215:
movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
xorl %edx, %edx # _66->timeout
movl 924(%eax), %eax # _66->timeout, _66->timeout
call nsecs_to_jiffies #
movl jiffies, %edx # jiffies, jiffies.33_70
addl %eax, %edx # _69, tmp259
movl $serial_ir+16, %eax #,
call mod_timer #
movl serial_ir+8, %eax # serial_ir.rcdev,
call ir_raw_event_handle #
movl $1, %eax #, <retval>
so it's that "serial_ir.rcdev->timeout" access that faults. So this is
the faulting source code:
drivers/media/rc/serial_ir.c: 402
mod_timer(&serial_ir.timeout_timer,
jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
ir_raw_event_handle(serial_ir.rcdev);
return IRQ_HANDLED;
and serial_ir.rcdev is NULL when ti tries to look up the timeout.
That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
generate timeout") and *that* is the actual new bug.
Looking at the code, that serial_ir.rcdev thing is initialized fairly
late in serial_ir_init_module(), while the interrupt is allocated
early in serial_ir_probe(), which is done _early_ in
serial_ir_init_module():
serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
serial_ir_probe -> devm_request_irq
Mauro, Sean, please fix.
Anyway, this is clearly a bug in the serial_ir code, but it is *also*
once again clearly now being *triggered* due to the irq handling
changes.
I'm pretty sure that the thing that triggered this is once more commit
a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
callback") which seems to retrigger stale irqs that simply should not
be retriggered.
They aren't actually active any more, if they ever were.
So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
good for testing, but not good for actual users.
I the local APIC retrigger just unconditionally resends that irq. But
it's the core interrupt code that decides to retrigger it incorrectly
for some reason.
Why is IRQS_PENDING set for that thing? Something must have almost
certainly set it, despite the irq not actually having ever been
pending. Thomas?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-24 19:15 ` Linus Torvalds
` (2 preceding siblings ...)
(?)
@ 2017-02-25 9:07 ` Ingo Molnar
-1 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-25 9:07 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
Yeah, so some distros like Fedora already have CONFIG_DEBUG_SHIRQ=y enabled, but
part of the problem is that CONFIG_DEBUG_SHIRQ=y has this:
#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
* to happen immediately, so let's make sure....
* We disable the irq to make sure that a 'real' IRQ doesn't
* run in parallel with our fake.
*/
unsigned long flags;
disable_irq(irq);
local_irq_save(flags);
handler(irq, dev_id);
local_irq_restore(flags);
enable_irq(irq);
}
#endif
Note that the '_FIXME' postfix effectively turns off this particular debug check
...
Thomas and me realized this risk a week ago ago, and tried to resurrect full
CONFIG_DEBUG_SHIRQ=y functionality to more reliably trigger these problems:
https://lkml.org/lkml/2017/2/15/341
... but were forced to revert that fix because it's not working on x86 yet (it's
crashing). We also thought we fixed the problems exposed in drivers, as the
retrigger changes have been in -tip and -next for some time, but were clearly too
optimistic about that.
So, should we revert the hw-retrigger change:
a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
upstream straight away:
Acked-by: Ingo Molnar <mingo@kernel.org>
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 9:07 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-25 9:07 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
Yeah, so some distros like Fedora already have CONFIG_DEBUG_SHIRQ=y enabled, but
part of the problem is that CONFIG_DEBUG_SHIRQ=y has this:
#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
* to happen immediately, so let's make sure....
* We disable the irq to make sure that a 'real' IRQ doesn't
* run in parallel with our fake.
*/
unsigned long flags;
disable_irq(irq);
local_irq_save(flags);
handler(irq, dev_id);
local_irq_restore(flags);
enable_irq(irq);
}
#endif
Note that the '_FIXME' postfix effectively turns off this particular debug check
...
Thomas and me realized this risk a week ago ago, and tried to resurrect full
CONFIG_DEBUG_SHIRQ=y functionality to more reliably trigger these problems:
https://lkml.org/lkml/2017/2/15/341
... but were forced to revert that fix because it's not working on x86 yet (it's
crashing). We also thought we fixed the problems exposed in drivers, as the
retrigger changes have been in -tip and -next for some time, but were clearly too
optimistic about that.
So, should we revert the hw-retrigger change:
a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
upstream straight away:
Acked-by: Ingo Molnar <mingo@kernel.org>
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 9:07 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-25 9:07 UTC (permalink / raw)
To: linux-arm-kernel
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
Yeah, so some distros like Fedora already have CONFIG_DEBUG_SHIRQ=y enabled, but
part of the problem is that CONFIG_DEBUG_SHIRQ=y has this:
#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
* to happen immediately, so let's make sure....
* We disable the irq to make sure that a 'real' IRQ doesn't
* run in parallel with our fake.
*/
unsigned long flags;
disable_irq(irq);
local_irq_save(flags);
handler(irq, dev_id);
local_irq_restore(flags);
enable_irq(irq);
}
#endif
Note that the '_FIXME' postfix effectively turns off this particular debug check
...
Thomas and me realized this risk a week ago ago, and tried to resurrect full
CONFIG_DEBUG_SHIRQ=y functionality to more reliably trigger these problems:
https://lkml.org/lkml/2017/2/15/341
... but were forced to revert that fix because it's not working on x86 yet (it's
crashing). We also thought we fixed the problems exposed in drivers, as the
retrigger changes have been in -tip and -next for some time, but were clearly too
optimistic about that.
So, should we revert the hw-retrigger change:
a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
upstream straight away:
Acked-by: Ingo Molnar <mingo@kernel.org>
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 9:07 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-25 9:07 UTC (permalink / raw)
To: linus-amlogic
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
Yeah, so some distros like Fedora already have CONFIG_DEBUG_SHIRQ=y enabled, but
part of the problem is that CONFIG_DEBUG_SHIRQ=y has this:
#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
* to happen immediately, so let's make sure....
* We disable the irq to make sure that a 'real' IRQ doesn't
* run in parallel with our fake.
*/
unsigned long flags;
disable_irq(irq);
local_irq_save(flags);
handler(irq, dev_id);
local_irq_restore(flags);
enable_irq(irq);
}
#endif
Note that the '_FIXME' postfix effectively turns off this particular debug check
...
Thomas and me realized this risk a week ago ago, and tried to resurrect full
CONFIG_DEBUG_SHIRQ=y functionality to more reliably trigger these problems:
https://lkml.org/lkml/2017/2/15/341
... but were forced to revert that fix because it's not working on x86 yet (it's
crashing). We also thought we fixed the problems exposed in drivers, as the
retrigger changes have been in -tip and -next for some time, but were clearly too
optimistic about that.
So, should we revert the hw-retrigger change:
a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
upstream straight away:
Acked-by: Ingo Molnar <mingo@kernel.org>
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 9:07 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-25 9:07 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2137 bytes --]
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
Yeah, so some distros like Fedora already have CONFIG_DEBUG_SHIRQ=y enabled, but
part of the problem is that CONFIG_DEBUG_SHIRQ=y has this:
#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
* to happen immediately, so let's make sure....
* We disable the irq to make sure that a 'real' IRQ doesn't
* run in parallel with our fake.
*/
unsigned long flags;
disable_irq(irq);
local_irq_save(flags);
handler(irq, dev_id);
local_irq_restore(flags);
enable_irq(irq);
}
#endif
Note that the '_FIXME' postfix effectively turns off this particular debug check
...
Thomas and me realized this risk a week ago ago, and tried to resurrect full
CONFIG_DEBUG_SHIRQ=y functionality to more reliably trigger these problems:
https://lkml.org/lkml/2017/2/15/341
... but were forced to revert that fix because it's not working on x86 yet (it's
crashing). We also thought we fixed the problems exposed in drivers, as the
retrigger changes have been in -tip and -next for some time, but were clearly too
optimistic about that.
So, should we revert the hw-retrigger change:
a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
upstream straight away:
Acked-by: Ingo Molnar <mingo@kernel.org>
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-24 19:15 ` Linus Torvalds
` (2 preceding siblings ...)
(?)
@ 2017-02-25 11:14 ` Sean Young
-1 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:14 UTC (permalink / raw)
To: Linus Torvalds
Cc: devicetree, Ruslan Ruslichenko, linux-omap, kernel, wfg, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, Thomas Gleixner, kernel test robot,
LKP, Ingo Molnar, linux-arm-kernel, Linux Media Mailing List
On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@intel.com> wrote:
> >
> > 0day kernel testing robot got the below dmesg and the first bad commit is
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> >
> > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > Merge: 5ab3566 9eeb0ed
> >
> > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
> > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
> > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > [ 4.666675] Call Trace:
> > [ 4.666675] <IRQ>
> > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > [ 4.666675] handle_irq_event+0x32/0x60
> > [ 4.666675] handle_edge_irq+0xa5/0x120
> > [ 4.666675] handle_irq+0x9d/0xd0
> > [ 4.666675] </IRQ>
> > [ 4.666675] do_IRQ+0x5f/0x130
> > [ 4.666675] common_interrupt+0x33/0x38
> > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > [ 4.666675] serial_ir_probe+0xbb/0x300
> > [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
Oh dear. I've pointed out others making the same mistake when doing code
reviews, clearly I need review my own code better.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
ir_raw_event_handle() call will also go bang if passed a null pointer, so
this problem existed before (since v4.10).
Thanks for debugging this, I'll send a patch as a reply to this email.
Sean
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 11:14 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:14 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Ruslan Ruslichenko, LKP, linux-input,
linux-omap, kernel, Linux Media Mailing List, linux-mediatek,
linux-amlogic, linux-arm-kernel, devicetree, Linux LED Subsystem,
LKML, wfg
On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@intel.com> wrote:
> >
> > 0day kernel testing robot got the below dmesg and the first bad commit is
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> >
> > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > Merge: 5ab3566 9eeb0ed
> >
> > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
> > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
> > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > [ 4.666675] Call Trace:
> > [ 4.666675] <IRQ>
> > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > [ 4.666675] handle_irq_event+0x32/0x60
> > [ 4.666675] handle_edge_irq+0xa5/0x120
> > [ 4.666675] handle_irq+0x9d/0xd0
> > [ 4.666675] </IRQ>
> > [ 4.666675] do_IRQ+0x5f/0x130
> > [ 4.666675] common_interrupt+0x33/0x38
> > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > [ 4.666675] serial_ir_probe+0xbb/0x300
> > [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
Oh dear. I've pointed out others making the same mistake when doing code
reviews, clearly I need review my own code better.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
ir_raw_event_handle() call will also go bang if passed a null pointer, so
this problem existed before (since v4.10).
Thanks for debugging this, I'll send a patch as a reply to this email.
Sean
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 11:14 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:14 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Ruslan Ruslichenko, LKP, linux-input,
linux-omap, kernel, Linux Media Mailing List, linux-mediatek,
linux-amlogic, linux-arm-kernel, devicetree, Linux LED Subsystem,
LKML, wfg
On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@intel.com> wrote:
> >
> > 0day kernel testing robot got the below dmesg and the first bad commit is
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> >
> > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > Merge: 5ab3566 9eeb0ed
> >
> > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
> > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
> > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > [ 4.666675] Call Trace:
> > [ 4.666675] <IRQ>
> > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > [ 4.666675] handle_irq_event+0x32/0x60
> > [ 4.666675] handle_edge_irq+0xa5/0x120
> > [ 4.666675] handle_irq+0x9d/0xd0
> > [ 4.666675] </IRQ>
> > [ 4.666675] do_IRQ+0x5f/0x130
> > [ 4.666675] common_interrupt+0x33/0x38
> > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > [ 4.666675] serial_ir_probe+0xbb/0x300
> > [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
Oh dear. I've pointed out others making the same mistake when doing code
reviews, clearly I need review my own code better.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
ir_raw_event_handle() call will also go bang if passed a null pointer, so
this problem existed before (since v4.10).
Thanks for debugging this, I'll send a patch as a reply to this email.
Sean
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 11:14 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:14 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@intel.com> wrote:
> >
> > 0day kernel testing robot got the below dmesg and the first bad commit is
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> >
> > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > Merge: 5ab3566 9eeb0ed
> >
> > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
> > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
> > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > [ 4.666675] Call Trace:
> > [ 4.666675] <IRQ>
> > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > [ 4.666675] handle_irq_event+0x32/0x60
> > [ 4.666675] handle_edge_irq+0xa5/0x120
> > [ 4.666675] handle_irq+0x9d/0xd0
> > [ 4.666675] </IRQ>
> > [ 4.666675] do_IRQ+0x5f/0x130
> > [ 4.666675] common_interrupt+0x33/0x38
> > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > [ 4.666675] serial_ir_probe+0xbb/0x300
> > [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
Oh dear. I've pointed out others making the same mistake when doing code
reviews, clearly I need review my own code better.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
ir_raw_event_handle() call will also go bang if passed a null pointer, so
this problem existed before (since v4.10).
Thanks for debugging this, I'll send a patch as a reply to this email.
Sean
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 11:14 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:14 UTC (permalink / raw)
To: linus-amlogic
On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@intel.com> wrote:
> >
> > 0day kernel testing robot got the below dmesg and the first bad commit is
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> >
> > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > Merge: 5ab3566 9eeb0ed
> >
> > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
> > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
> > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > [ 4.666675] Call Trace:
> > [ 4.666675] <IRQ>
> > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > [ 4.666675] handle_irq_event+0x32/0x60
> > [ 4.666675] handle_edge_irq+0xa5/0x120
> > [ 4.666675] handle_irq+0x9d/0xd0
> > [ 4.666675] </IRQ>
> > [ 4.666675] do_IRQ+0x5f/0x130
> > [ 4.666675] common_interrupt+0x33/0x38
> > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > [ 4.666675] serial_ir_probe+0xbb/0x300
> > [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
Oh dear. I've pointed out others making the same mistake when doing code
reviews, clearly I need review my own code better.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
ir_raw_event_handle() call will also go bang if passed a null pointer, so
this problem existed before (since v4.10).
Thanks for debugging this, I'll send a patch as a reply to this email.
Sean
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
2017-02-25 11:14 ` Sean Young
(?)
(?)
@ 2017-02-25 11:28 ` Sean Young
-1 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Ruslan Ruslichenko, LKP, linux-input,
linux-omap, kernel, Linux Media Mailing List, linux-mediatek,
linux-amlogic, linux-arm-kernel, devicetree, Linux LED Subsystem,
LKML, wfg
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
1 file changed, 118 insertions(+), 125 deletions(-)
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb22..22144b4 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
ir_raw_event_handle(serial_ir.rcdev);
}
-static int serial_ir_probe(struct platform_device *dev)
-{
- int i, nlow, nhigh, result;
-
- result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
- share_irq ? IRQF_SHARED : 0,
- KBUILD_MODNAME, &hardware);
- if (result < 0) {
- if (result == -EBUSY)
- dev_err(&dev->dev, "IRQ %d busy\n", irq);
- else if (result == -EINVAL)
- dev_err(&dev->dev, "Bad irq number or handler\n");
- return result;
- }
-
- /* Reserve io region. */
- if ((iommap &&
- (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
- KBUILD_MODNAME) == NULL)) ||
- (!iommap && (devm_request_region(&dev->dev, io, 8,
- KBUILD_MODNAME) == NULL))) {
- dev_err(&dev->dev, "port %04x already in use\n", io);
- dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
- dev_warn(&dev->dev,
- "or compile the serial port driver as module and\n");
- dev_warn(&dev->dev, "make sure this module is loaded first\n");
- return -EBUSY;
- }
-
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- /* Initialize pulse/space widths */
- init_timing_params(50, 38000);
-
- /* If pin is high, then this must be an active low receiver. */
- if (sense == -1) {
- /* wait 1/2 sec for the power supply */
- msleep(500);
-
- /*
- * probe 9 times every 0.04s, collect "votes" for
- * active high/low
- */
- nlow = 0;
- nhigh = 0;
- for (i = 0; i < 9; i++) {
- if (sinp(UART_MSR) & hardware[type].signal_pin)
- nlow++;
- else
- nhigh++;
- msleep(40);
- }
- sense = nlow >= nhigh ? 1 : 0;
- dev_info(&dev->dev, "auto-detected active %s receiver\n",
- sense ? "low" : "high");
- } else
- dev_info(&dev->dev, "Manually using active %s receiver\n",
- sense ? "low" : "high");
-
- dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
-}
-
static int serial_ir_open(struct rc_dev *rcdev)
{
unsigned long flags;
@@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
return 0;
}
+static int serial_ir_probe(struct platform_device *dev)
+{
+ struct rc_dev *rcdev;
+ int i, nlow, nhigh, result;
+
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
+ result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+ share_irq ? IRQF_SHARED : 0,
+ KBUILD_MODNAME, &hardware);
+ if (result < 0) {
+ if (result == -EBUSY)
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
+ else if (result == -EINVAL)
+ dev_err(&dev->dev, "Bad irq number or handler\n");
+ return result;
+ }
+
+ /* Reserve io region. */
+ if ((iommap &&
+ (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+ KBUILD_MODNAME) == NULL)) ||
+ (!iommap && (devm_request_region(&dev->dev, io, 8,
+ KBUILD_MODNAME) == NULL))) {
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(50, 38000);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = nlow >= nhigh ? 1 : 0;
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
+ } else
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
+
+ dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+
+ return devm_rc_register_device(&dev->dev, rcdev);
+}
+
static struct platform_driver serial_ir_driver = {
.probe = serial_ir_probe,
.suspend = serial_ir_suspend,
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
--
2.9.3
On Sat, Feb 25, 2017 at 11:14:25AM +0000, Sean Young wrote:
> On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> > Added more relevant people. I've debugged the immediate problem below,
> > but I think there's another problem that actually triggered this.
> >
> > On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> > <fengguang.wu@intel.com> wrote:
> > >
> > > 0day kernel testing robot got the below dmesg and the first bad commit is
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > >
> > > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > > Merge: 5ab3566 9eeb0ed
> > >
> > > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> > [...]
> > > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
> >
> > This merge being fingered ends up being a subtle interaction with other changes.
> >
> > Those "other changes" are (again) the interrupt retrigger code that
> > was reverted for 4.10, and then we tried to merge them again this
> > merge window.
> >
> > Because the immediate cause is:
> >
> > > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > > [ 4.666675] Call Trace:
> > > [ 4.666675] <IRQ>
> > > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > > [ 4.666675] handle_irq_event+0x32/0x60
> > > [ 4.666675] handle_edge_irq+0xa5/0x120
> > > [ 4.666675] handle_irq+0x9d/0xd0
> > > [ 4.666675] </IRQ>
> > > [ 4.666675] do_IRQ+0x5f/0x130
> > > [ 4.666675] common_interrupt+0x33/0x38
> > > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > [ 4.666675] serial_ir_probe+0xbb/0x300
> > > [ 4.666675] platform_drv_probe+0x48/0xb0
> > ...
> >
> > ie an interrupt came in immediately after the request_irq(), before
> > all the data was properly set up, which then causes the interrupt
> > handler to take a fault because it tries to access some field that
> > hasn't even been set up yet.
>
> Oh dear. I've pointed out others making the same mistake when doing code
> reviews, clearly I need review my own code better.
>
> >
> > The code line is helpful, the faulting instruction is
> >
> > mov 0x39c(%rax),%eax <--- fault
> > call ..
> > mov someglobalvar,%edx
> >
> > which together with the supplied config file makes me able to match it
> > up with the assembly generation around it:
> >
> > inb %dx, %al # tmp254, value
> > andb $1, %al #, tmp255
> > testb %al, %al # tmp255
> > je .L233 #,
> > .L215:
> > movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> > xorl %edx, %edx # _66->timeout
> > movl 924(%eax), %eax # _66->timeout, _66->timeout
> > call nsecs_to_jiffies #
> > movl jiffies, %edx # jiffies, jiffies.33_70
> > addl %eax, %edx # _69, tmp259
> > movl $serial_ir+16, %eax #,
> > call mod_timer #
> > movl serial_ir+8, %eax # serial_ir.rcdev,
> > call ir_raw_event_handle #
> > movl $1, %eax #, <retval>
> >
> > so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> > the faulting source code:
> >
> > drivers/media/rc/serial_ir.c: 402
> >
> > mod_timer(&serial_ir.timeout_timer,
> > jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
> >
> > ir_raw_event_handle(serial_ir.rcdev);
> >
> > return IRQ_HANDLED;
> >
> > and serial_ir.rcdev is NULL when ti tries to look up the timeout.
>
> ir_raw_event_handle() call will also go bang if passed a null pointer, so
> this problem existed before (since v4.10).
>
> Thanks for debugging this, I'll send a patch as a reply to this email.
>
>
> Sean
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 11:28 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:28 UTC (permalink / raw)
To: Linus Torvalds
Cc: kernel test robot, Thomas Gleixner, Ingo Molnar,
Mauro Carvalho Chehab, Ruslan Ruslichenko, LKP, linux-input,
linux-omap, kernel, Linux Media Mailing List, linux-mediatek,
linux-amlogic, linux-arm-kernel, devicetree, Linux LED Subsystem,
LKML, wfg
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
1 file changed, 118 insertions(+), 125 deletions(-)
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb22..22144b4 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
ir_raw_event_handle(serial_ir.rcdev);
}
-static int serial_ir_probe(struct platform_device *dev)
-{
- int i, nlow, nhigh, result;
-
- result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
- share_irq ? IRQF_SHARED : 0,
- KBUILD_MODNAME, &hardware);
- if (result < 0) {
- if (result == -EBUSY)
- dev_err(&dev->dev, "IRQ %d busy\n", irq);
- else if (result == -EINVAL)
- dev_err(&dev->dev, "Bad irq number or handler\n");
- return result;
- }
-
- /* Reserve io region. */
- if ((iommap &&
- (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
- KBUILD_MODNAME) == NULL)) ||
- (!iommap && (devm_request_region(&dev->dev, io, 8,
- KBUILD_MODNAME) == NULL))) {
- dev_err(&dev->dev, "port %04x already in use\n", io);
- dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
- dev_warn(&dev->dev,
- "or compile the serial port driver as module and\n");
- dev_warn(&dev->dev, "make sure this module is loaded first\n");
- return -EBUSY;
- }
-
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- /* Initialize pulse/space widths */
- init_timing_params(50, 38000);
-
- /* If pin is high, then this must be an active low receiver. */
- if (sense == -1) {
- /* wait 1/2 sec for the power supply */
- msleep(500);
-
- /*
- * probe 9 times every 0.04s, collect "votes" for
- * active high/low
- */
- nlow = 0;
- nhigh = 0;
- for (i = 0; i < 9; i++) {
- if (sinp(UART_MSR) & hardware[type].signal_pin)
- nlow++;
- else
- nhigh++;
- msleep(40);
- }
- sense = nlow >= nhigh ? 1 : 0;
- dev_info(&dev->dev, "auto-detected active %s receiver\n",
- sense ? "low" : "high");
- } else
- dev_info(&dev->dev, "Manually using active %s receiver\n",
- sense ? "low" : "high");
-
- dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
-}
-
static int serial_ir_open(struct rc_dev *rcdev)
{
unsigned long flags;
@@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
return 0;
}
+static int serial_ir_probe(struct platform_device *dev)
+{
+ struct rc_dev *rcdev;
+ int i, nlow, nhigh, result;
+
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
+ result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+ share_irq ? IRQF_SHARED : 0,
+ KBUILD_MODNAME, &hardware);
+ if (result < 0) {
+ if (result == -EBUSY)
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
+ else if (result == -EINVAL)
+ dev_err(&dev->dev, "Bad irq number or handler\n");
+ return result;
+ }
+
+ /* Reserve io region. */
+ if ((iommap &&
+ (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+ KBUILD_MODNAME) == NULL)) ||
+ (!iommap && (devm_request_region(&dev->dev, io, 8,
+ KBUILD_MODNAME) == NULL))) {
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(50, 38000);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = nlow >= nhigh ? 1 : 0;
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
+ } else
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
+
+ dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+
+ return devm_rc_register_device(&dev->dev, rcdev);
+}
+
static struct platform_driver serial_ir_driver = {
.probe = serial_ir_probe,
.suspend = serial_ir_suspend,
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
--
2.9.3
On Sat, Feb 25, 2017 at 11:14:25AM +0000, Sean Young wrote:
> On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> > Added more relevant people. I've debugged the immediate problem below,
> > but I think there's another problem that actually triggered this.
> >
> > On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> > <fengguang.wu@intel.com> wrote:
> > >
> > > 0day kernel testing robot got the below dmesg and the first bad commit is
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > >
> > > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > > Merge: 5ab3566 9eeb0ed
> > >
> > > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> > [...]
> > > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
> >
> > This merge being fingered ends up being a subtle interaction with other changes.
> >
> > Those "other changes" are (again) the interrupt retrigger code that
> > was reverted for 4.10, and then we tried to merge them again this
> > merge window.
> >
> > Because the immediate cause is:
> >
> > > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > > [ 4.666675] Call Trace:
> > > [ 4.666675] <IRQ>
> > > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > > [ 4.666675] handle_irq_event+0x32/0x60
> > > [ 4.666675] handle_edge_irq+0xa5/0x120
> > > [ 4.666675] handle_irq+0x9d/0xd0
> > > [ 4.666675] </IRQ>
> > > [ 4.666675] do_IRQ+0x5f/0x130
> > > [ 4.666675] common_interrupt+0x33/0x38
> > > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > [ 4.666675] serial_ir_probe+0xbb/0x300
> > > [ 4.666675] platform_drv_probe+0x48/0xb0
> > ...
> >
> > ie an interrupt came in immediately after the request_irq(), before
> > all the data was properly set up, which then causes the interrupt
> > handler to take a fault because it tries to access some field that
> > hasn't even been set up yet.
>
> Oh dear. I've pointed out others making the same mistake when doing code
> reviews, clearly I need review my own code better.
>
> >
> > The code line is helpful, the faulting instruction is
> >
> > mov 0x39c(%rax),%eax <--- fault
> > call ..
> > mov someglobalvar,%edx
> >
> > which together with the supplied config file makes me able to match it
> > up with the assembly generation around it:
> >
> > inb %dx, %al # tmp254, value
> > andb $1, %al #, tmp255
> > testb %al, %al # tmp255
> > je .L233 #,
> > .L215:
> > movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> > xorl %edx, %edx # _66->timeout
> > movl 924(%eax), %eax # _66->timeout, _66->timeout
> > call nsecs_to_jiffies #
> > movl jiffies, %edx # jiffies, jiffies.33_70
> > addl %eax, %edx # _69, tmp259
> > movl $serial_ir+16, %eax #,
> > call mod_timer #
> > movl serial_ir+8, %eax # serial_ir.rcdev,
> > call ir_raw_event_handle #
> > movl $1, %eax #, <retval>
> >
> > so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> > the faulting source code:
> >
> > drivers/media/rc/serial_ir.c: 402
> >
> > mod_timer(&serial_ir.timeout_timer,
> > jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
> >
> > ir_raw_event_handle(serial_ir.rcdev);
> >
> > return IRQ_HANDLED;
> >
> > and serial_ir.rcdev is NULL when ti tries to look up the timeout.
>
> ir_raw_event_handle() call will also go bang if passed a null pointer, so
> this problem existed before (since v4.10).
>
> Thanks for debugging this, I'll send a patch as a reply to this email.
>
>
> Sean
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 11:28 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:28 UTC (permalink / raw)
To: linux-arm-kernel
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
1 file changed, 118 insertions(+), 125 deletions(-)
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb22..22144b4 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
ir_raw_event_handle(serial_ir.rcdev);
}
-static int serial_ir_probe(struct platform_device *dev)
-{
- int i, nlow, nhigh, result;
-
- result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
- share_irq ? IRQF_SHARED : 0,
- KBUILD_MODNAME, &hardware);
- if (result < 0) {
- if (result == -EBUSY)
- dev_err(&dev->dev, "IRQ %d busy\n", irq);
- else if (result == -EINVAL)
- dev_err(&dev->dev, "Bad irq number or handler\n");
- return result;
- }
-
- /* Reserve io region. */
- if ((iommap &&
- (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
- KBUILD_MODNAME) == NULL)) ||
- (!iommap && (devm_request_region(&dev->dev, io, 8,
- KBUILD_MODNAME) == NULL))) {
- dev_err(&dev->dev, "port %04x already in use\n", io);
- dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
- dev_warn(&dev->dev,
- "or compile the serial port driver as module and\n");
- dev_warn(&dev->dev, "make sure this module is loaded first\n");
- return -EBUSY;
- }
-
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- /* Initialize pulse/space widths */
- init_timing_params(50, 38000);
-
- /* If pin is high, then this must be an active low receiver. */
- if (sense == -1) {
- /* wait 1/2 sec for the power supply */
- msleep(500);
-
- /*
- * probe 9 times every 0.04s, collect "votes" for
- * active high/low
- */
- nlow = 0;
- nhigh = 0;
- for (i = 0; i < 9; i++) {
- if (sinp(UART_MSR) & hardware[type].signal_pin)
- nlow++;
- else
- nhigh++;
- msleep(40);
- }
- sense = nlow >= nhigh ? 1 : 0;
- dev_info(&dev->dev, "auto-detected active %s receiver\n",
- sense ? "low" : "high");
- } else
- dev_info(&dev->dev, "Manually using active %s receiver\n",
- sense ? "low" : "high");
-
- dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
-}
-
static int serial_ir_open(struct rc_dev *rcdev)
{
unsigned long flags;
@@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
return 0;
}
+static int serial_ir_probe(struct platform_device *dev)
+{
+ struct rc_dev *rcdev;
+ int i, nlow, nhigh, result;
+
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
+ result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+ share_irq ? IRQF_SHARED : 0,
+ KBUILD_MODNAME, &hardware);
+ if (result < 0) {
+ if (result == -EBUSY)
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
+ else if (result == -EINVAL)
+ dev_err(&dev->dev, "Bad irq number or handler\n");
+ return result;
+ }
+
+ /* Reserve io region. */
+ if ((iommap &&
+ (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+ KBUILD_MODNAME) == NULL)) ||
+ (!iommap && (devm_request_region(&dev->dev, io, 8,
+ KBUILD_MODNAME) == NULL))) {
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(50, 38000);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = nlow >= nhigh ? 1 : 0;
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
+ } else
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
+
+ dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+
+ return devm_rc_register_device(&dev->dev, rcdev);
+}
+
static struct platform_driver serial_ir_driver = {
.probe = serial_ir_probe,
.suspend = serial_ir_suspend,
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
--
2.9.3
On Sat, Feb 25, 2017 at 11:14:25AM +0000, Sean Young wrote:
> On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> > Added more relevant people. I've debugged the immediate problem below,
> > but I think there's another problem that actually triggered this.
> >
> > On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> > <fengguang.wu@intel.com> wrote:
> > >
> > > 0day kernel testing robot got the below dmesg and the first bad commit is
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > >
> > > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > > Merge: 5ab3566 9eeb0ed
> > >
> > > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> > [...]
> > > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
> >
> > This merge being fingered ends up being a subtle interaction with other changes.
> >
> > Those "other changes" are (again) the interrupt retrigger code that
> > was reverted for 4.10, and then we tried to merge them again this
> > merge window.
> >
> > Because the immediate cause is:
> >
> > > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > > [ 4.666675] Call Trace:
> > > [ 4.666675] <IRQ>
> > > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > > [ 4.666675] handle_irq_event+0x32/0x60
> > > [ 4.666675] handle_edge_irq+0xa5/0x120
> > > [ 4.666675] handle_irq+0x9d/0xd0
> > > [ 4.666675] </IRQ>
> > > [ 4.666675] do_IRQ+0x5f/0x130
> > > [ 4.666675] common_interrupt+0x33/0x38
> > > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > [ 4.666675] serial_ir_probe+0xbb/0x300
> > > [ 4.666675] platform_drv_probe+0x48/0xb0
> > ...
> >
> > ie an interrupt came in immediately after the request_irq(), before
> > all the data was properly set up, which then causes the interrupt
> > handler to take a fault because it tries to access some field that
> > hasn't even been set up yet.
>
> Oh dear. I've pointed out others making the same mistake when doing code
> reviews, clearly I need review my own code better.
>
> >
> > The code line is helpful, the faulting instruction is
> >
> > mov 0x39c(%rax),%eax <--- fault
> > call ..
> > mov someglobalvar,%edx
> >
> > which together with the supplied config file makes me able to match it
> > up with the assembly generation around it:
> >
> > inb %dx, %al # tmp254, value
> > andb $1, %al #, tmp255
> > testb %al, %al # tmp255
> > je .L233 #,
> > .L215:
> > movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> > xorl %edx, %edx # _66->timeout
> > movl 924(%eax), %eax # _66->timeout, _66->timeout
> > call nsecs_to_jiffies #
> > movl jiffies, %edx # jiffies, jiffies.33_70
> > addl %eax, %edx # _69, tmp259
> > movl $serial_ir+16, %eax #,
> > call mod_timer #
> > movl serial_ir+8, %eax # serial_ir.rcdev,
> > call ir_raw_event_handle #
> > movl $1, %eax #, <retval>
> >
> > so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> > the faulting source code:
> >
> > drivers/media/rc/serial_ir.c: 402
> >
> > mod_timer(&serial_ir.timeout_timer,
> > jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
> >
> > ir_raw_event_handle(serial_ir.rcdev);
> >
> > return IRQ_HANDLED;
> >
> > and serial_ir.rcdev is NULL when ti tries to look up the timeout.
>
> ir_raw_event_handle() call will also go bang if passed a null pointer, so
> this problem existed before (since v4.10).
>
> Thanks for debugging this, I'll send a patch as a reply to this email.
>
>
> Sean
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 11:28 ` Sean Young
0 siblings, 0 replies; 100+ messages in thread
From: Sean Young @ 2017-02-25 11:28 UTC (permalink / raw)
To: linus-amlogic
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
1 file changed, 118 insertions(+), 125 deletions(-)
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb22..22144b4 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
ir_raw_event_handle(serial_ir.rcdev);
}
-static int serial_ir_probe(struct platform_device *dev)
-{
- int i, nlow, nhigh, result;
-
- result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
- share_irq ? IRQF_SHARED : 0,
- KBUILD_MODNAME, &hardware);
- if (result < 0) {
- if (result == -EBUSY)
- dev_err(&dev->dev, "IRQ %d busy\n", irq);
- else if (result == -EINVAL)
- dev_err(&dev->dev, "Bad irq number or handler\n");
- return result;
- }
-
- /* Reserve io region. */
- if ((iommap &&
- (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
- KBUILD_MODNAME) == NULL)) ||
- (!iommap && (devm_request_region(&dev->dev, io, 8,
- KBUILD_MODNAME) == NULL))) {
- dev_err(&dev->dev, "port %04x already in use\n", io);
- dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
- dev_warn(&dev->dev,
- "or compile the serial port driver as module and\n");
- dev_warn(&dev->dev, "make sure this module is loaded first\n");
- return -EBUSY;
- }
-
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
- result = hardware_init_port();
- if (result < 0)
- return result;
-
- /* Initialize pulse/space widths */
- init_timing_params(50, 38000);
-
- /* If pin is high, then this must be an active low receiver. */
- if (sense == -1) {
- /* wait 1/2 sec for the power supply */
- msleep(500);
-
- /*
- * probe 9 times every 0.04s, collect "votes" for
- * active high/low
- */
- nlow = 0;
- nhigh = 0;
- for (i = 0; i < 9; i++) {
- if (sinp(UART_MSR) & hardware[type].signal_pin)
- nlow++;
- else
- nhigh++;
- msleep(40);
- }
- sense = nlow >= nhigh ? 1 : 0;
- dev_info(&dev->dev, "auto-detected active %s receiver\n",
- sense ? "low" : "high");
- } else
- dev_info(&dev->dev, "Manually using active %s receiver\n",
- sense ? "low" : "high");
-
- dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
-}
-
static int serial_ir_open(struct rc_dev *rcdev)
{
unsigned long flags;
@@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
return 0;
}
+static int serial_ir_probe(struct platform_device *dev)
+{
+ struct rc_dev *rcdev;
+ int i, nlow, nhigh, result;
+
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
+ result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+ share_irq ? IRQF_SHARED : 0,
+ KBUILD_MODNAME, &hardware);
+ if (result < 0) {
+ if (result == -EBUSY)
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
+ else if (result == -EINVAL)
+ dev_err(&dev->dev, "Bad irq number or handler\n");
+ return result;
+ }
+
+ /* Reserve io region. */
+ if ((iommap &&
+ (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+ KBUILD_MODNAME) == NULL)) ||
+ (!iommap && (devm_request_region(&dev->dev, io, 8,
+ KBUILD_MODNAME) == NULL))) {
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
+ return -EBUSY;
+ }
+
+ result = hardware_init_port();
+ if (result < 0)
+ return result;
+
+ /* Initialize pulse/space widths */
+ init_timing_params(50, 38000);
+
+ /* If pin is high, then this must be an active low receiver. */
+ if (sense == -1) {
+ /* wait 1/2 sec for the power supply */
+ msleep(500);
+
+ /*
+ * probe 9 times every 0.04s, collect "votes" for
+ * active high/low
+ */
+ nlow = 0;
+ nhigh = 0;
+ for (i = 0; i < 9; i++) {
+ if (sinp(UART_MSR) & hardware[type].signal_pin)
+ nlow++;
+ else
+ nhigh++;
+ msleep(40);
+ }
+ sense = nlow >= nhigh ? 1 : 0;
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
+ } else
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
+
+ dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+
+ return devm_rc_register_device(&dev->dev, rcdev);
+}
+
static struct platform_driver serial_ir_driver = {
.probe = serial_ir_probe,
.suspend = serial_ir_suspend,
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
--
2.9.3
On Sat, Feb 25, 2017 at 11:14:25AM +0000, Sean Young wrote:
> On Fri, Feb 24, 2017 at 11:15:51AM -0800, Linus Torvalds wrote:
> > Added more relevant people. I've debugged the immediate problem below,
> > but I think there's another problem that actually triggered this.
> >
> > On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> > <fengguang.wu@intel.com> wrote:
> > >
> > > 0day kernel testing robot got the below dmesg and the first bad commit is
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > >
> > > commit ff58d005cd10fcd372787cceac547e11cf706ff6
> > > Merge: 5ab3566 9eeb0ed
> > >
> > > Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> > [...]
> > > [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
> > > [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
> > > [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
> >
> > This merge being fingered ends up being a subtle interaction with other changes.
> >
> > Those "other changes" are (again) the interrupt retrigger code that
> > was reverted for 4.10, and then we tried to merge them again this
> > merge window.
> >
> > Because the immediate cause is:
> >
> > > [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
> > > [ 4.666675] Call Trace:
> > > [ 4.666675] <IRQ>
> > > [ 4.666675] __handle_irq_event_percpu+0x57/0x100
> > > [ 4.666675] handle_irq_event_percpu+0x1d/0x50
> > > [ 4.666675] handle_irq_event+0x32/0x60
> > > [ 4.666675] handle_edge_irq+0xa5/0x120
> > > [ 4.666675] handle_irq+0x9d/0xd0
> > > [ 4.666675] </IRQ>
> > > [ 4.666675] do_IRQ+0x5f/0x130
> > > [ 4.666675] common_interrupt+0x33/0x38
> > > [ 4.666675] EIP: hardware_init_port+0x3f/0x190
> > > [ 4.666675] EFLAGS: 00200246 CPU: 0
> > > [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
> > > [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
> > > [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > [ 4.666675] serial_ir_probe+0xbb/0x300
> > > [ 4.666675] platform_drv_probe+0x48/0xb0
> > ...
> >
> > ie an interrupt came in immediately after the request_irq(), before
> > all the data was properly set up, which then causes the interrupt
> > handler to take a fault because it tries to access some field that
> > hasn't even been set up yet.
>
> Oh dear. I've pointed out others making the same mistake when doing code
> reviews, clearly I need review my own code better.
>
> >
> > The code line is helpful, the faulting instruction is
> >
> > mov 0x39c(%rax),%eax <--- fault
> > call ..
> > mov someglobalvar,%edx
> >
> > which together with the supplied config file makes me able to match it
> > up with the assembly generation around it:
> >
> > inb %dx, %al # tmp254, value
> > andb $1, %al #, tmp255
> > testb %al, %al # tmp255
> > je .L233 #,
> > .L215:
> > movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> > xorl %edx, %edx # _66->timeout
> > movl 924(%eax), %eax # _66->timeout, _66->timeout
> > call nsecs_to_jiffies #
> > movl jiffies, %edx # jiffies, jiffies.33_70
> > addl %eax, %edx # _69, tmp259
> > movl $serial_ir+16, %eax #,
> > call mod_timer #
> > movl serial_ir+8, %eax # serial_ir.rcdev,
> > call ir_raw_event_handle #
> > movl $1, %eax #, <retval>
> >
> > so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> > the faulting source code:
> >
> > drivers/media/rc/serial_ir.c: 402
> >
> > mod_timer(&serial_ir.timeout_timer,
> > jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
> >
> > ir_raw_event_handle(serial_ir.rcdev);
> >
> > return IRQ_HANDLED;
> >
> > and serial_ir.rcdev is NULL when ti tries to look up the timeout.
>
> ir_raw_event_handle() call will also go bang if passed a null pointer, so
> this problem existed before (since v4.10).
>
> Thanks for debugging this, I'll send a patch as a reply to this email.
>
>
> Sean
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
2017-02-25 11:28 ` Sean Young
` (3 preceding siblings ...)
(?)
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: Sean Young
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
wfg-VuQAYsv1563Yd54FQh9/CA, Linus Torvalds, LKML,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Thomas Gleixner,
kernel test robot, LKP, Ingo Molnar,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean-hENCXIMQXOg@public.gmane.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
>
> Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> # 4.10
> Signed-off-by: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: Sean Young
Cc: Linus Torvalds, kernel test robot, Thomas Gleixner, Ingo Molnar,
Ruslan Ruslichenko, LKP, linux-input, linux-omap, kernel,
Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean@mess.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
>
> Cc: <stable@vger.kernel.org> # 4.10
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: Sean Young
Cc: Linus Torvalds, kernel test robot, Thomas Gleixner, Ingo Molnar,
Ruslan Ruslichenko, LKP, linux-input, linux-omap, kernel,
Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean@mess.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
>
> Cc: <stable@vger.kernel.org> # 4.10
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: linux-arm-kernel
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean@mess.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
>
> Cc: <stable@vger.kernel.org> # 4.10
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: linus-amlogic
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean@mess.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
>
> Cc: <stable@vger.kernel.org> # 4.10
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:34 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 9672 bytes --]
Em Sat, 25 Feb 2017 11:28:16 +0000
Sean Young <sean@mess.org> escreveu:
> When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> is still null so will cause null deference if the irq handler is called
> early on.
>
> Also ensure that timeout_timer is setup.
>
> Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ(a)mail.gmail.com
>
> Cc: <stable@vger.kernel.org> # 4.10
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> 1 file changed, 118 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> index 923fb22..22144b4 100644
> --- a/drivers/media/rc/serial_ir.c
> +++ b/drivers/media/rc/serial_ir.c
> @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> ir_raw_event_handle(serial_ir.rcdev);
> }
>
> -static int serial_ir_probe(struct platform_device *dev)
> -{
> - int i, nlow, nhigh, result;
Hmm... why did you move this function to be after serial_ir_open()?
That messes with the diff without no good reason, making harder to
identify what you changed here.
> -
> - result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> - share_irq ? IRQF_SHARED : 0,
> - KBUILD_MODNAME, &hardware);
> - if (result < 0) {
> - if (result == -EBUSY)
> - dev_err(&dev->dev, "IRQ %d busy\n", irq);
> - else if (result == -EINVAL)
> - dev_err(&dev->dev, "Bad irq number or handler\n");
> - return result;
> - }
> -
> - /* Reserve io region. */
> - if ((iommap &&
> - (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> - KBUILD_MODNAME) == NULL)) ||
> - (!iommap && (devm_request_region(&dev->dev, io, 8,
> - KBUILD_MODNAME) == NULL))) {
> - dev_err(&dev->dev, "port %04x already in use\n", io);
> - dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> - dev_warn(&dev->dev,
> - "or compile the serial port driver as module and\n");
> - dev_warn(&dev->dev, "make sure this module is loaded first\n");
> - return -EBUSY;
> - }
> -
> - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> - (unsigned long)&serial_ir);
> -
> - result = hardware_init_port();
> - if (result < 0)
> - return result;
> -
> - /* Initialize pulse/space widths */
> - init_timing_params(50, 38000);
> -
> - /* If pin is high, then this must be an active low receiver. */
> - if (sense == -1) {
> - /* wait 1/2 sec for the power supply */
> - msleep(500);
> -
> - /*
> - * probe 9 times every 0.04s, collect "votes" for
> - * active high/low
> - */
> - nlow = 0;
> - nhigh = 0;
> - for (i = 0; i < 9; i++) {
> - if (sinp(UART_MSR) & hardware[type].signal_pin)
> - nlow++;
> - else
> - nhigh++;
> - msleep(40);
> - }
> - sense = nlow >= nhigh ? 1 : 0;
> - dev_info(&dev->dev, "auto-detected active %s receiver\n",
> - sense ? "low" : "high");
> - } else
> - dev_info(&dev->dev, "Manually using active %s receiver\n",
> - sense ? "low" : "high");
> -
> - dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> - return 0;
> -}
> -
> static int serial_ir_open(struct rc_dev *rcdev)
> {
> unsigned long flags;
> @@ -679,6 +611,123 @@ static int serial_ir_resume(struct platform_device *dev)
> return 0;
> }
>
> +static int serial_ir_probe(struct platform_device *dev)
> +{
> + struct rc_dev *rcdev;
> + int i, nlow, nhigh, result;
> +
> + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + if (hardware[type].send_pulse && hardware[type].send_space)
> + rcdev->tx_ir = serial_ir_tx;
> + if (hardware[type].set_send_carrier)
> + rcdev->s_tx_carrier = serial_ir_tx_carrier;
> + if (hardware[type].set_duty_cycle)
> + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> +
> + switch (type) {
> + case IR_HOMEBREW:
> + rcdev->input_name = "Serial IR type home-brew";
> + break;
> + case IR_IRDEO:
> + rcdev->input_name = "Serial IR type IRdeo";
> + break;
> + case IR_IRDEO_REMOTE:
> + rcdev->input_name = "Serial IR type IRdeo remote";
> + break;
> + case IR_ANIMAX:
> + rcdev->input_name = "Serial IR type AnimaX";
> + break;
> + case IR_IGOR:
> + rcdev->input_name = "Serial IR type IgorPlug";
> + break;
> + }
> +
> + rcdev->input_phys = KBUILD_MODNAME "/input0";
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->input_id.vendor = 0x0001;
> + rcdev->input_id.product = 0x0001;
> + rcdev->input_id.version = 0x0100;
> + rcdev->open = serial_ir_open;
> + rcdev->close = serial_ir_close;
> + rcdev->dev.parent = &serial_ir.pdev->dev;
> + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> + rcdev->driver_name = KBUILD_MODNAME;
> + rcdev->map_name = RC_MAP_RC6_MCE;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> + rcdev->rx_resolution = 250000;
> +
> + serial_ir.rcdev = rcdev;
> +
> + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
> + (unsigned long)&serial_ir);
> +
> + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
> + share_irq ? IRQF_SHARED : 0,
> + KBUILD_MODNAME, &hardware);
> + if (result < 0) {
> + if (result == -EBUSY)
> + dev_err(&dev->dev, "IRQ %d busy\n", irq);
> + else if (result == -EINVAL)
> + dev_err(&dev->dev, "Bad irq number or handler\n");
> + return result;
> + }
> +
> + /* Reserve io region. */
> + if ((iommap &&
> + (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
> + KBUILD_MODNAME) == NULL)) ||
> + (!iommap && (devm_request_region(&dev->dev, io, 8,
> + KBUILD_MODNAME) == NULL))) {
> + dev_err(&dev->dev, "port %04x already in use\n", io);
> + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
> + dev_warn(&dev->dev,
> + "or compile the serial port driver as module and\n");
> + dev_warn(&dev->dev, "make sure this module is loaded first\n");
> + return -EBUSY;
> + }
> +
> + result = hardware_init_port();
> + if (result < 0)
> + return result;
> +
> + /* Initialize pulse/space widths */
> + init_timing_params(50, 38000);
> +
> + /* If pin is high, then this must be an active low receiver. */
> + if (sense == -1) {
> + /* wait 1/2 sec for the power supply */
> + msleep(500);
> +
> + /*
> + * probe 9 times every 0.04s, collect "votes" for
> + * active high/low
> + */
> + nlow = 0;
> + nhigh = 0;
> + for (i = 0; i < 9; i++) {
> + if (sinp(UART_MSR) & hardware[type].signal_pin)
> + nlow++;
> + else
> + nhigh++;
> + msleep(40);
> + }
> + sense = nlow >= nhigh ? 1 : 0;
> + dev_info(&dev->dev, "auto-detected active %s receiver\n",
> + sense ? "low" : "high");
> + } else
> + dev_info(&dev->dev, "Manually using active %s receiver\n",
> + sense ? "low" : "high");
> +
> + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
> +
> + return devm_rc_register_device(&dev->dev, rcdev);
> +}
> +
> static struct platform_driver serial_ir_driver = {
> .probe = serial_ir_probe,
> .suspend = serial_ir_suspend,
> @@ -723,7 +772,6 @@ static void serial_ir_exit(void)
>
> static int __init serial_ir_init_module(void)
> {
> - struct rc_dev *rcdev;
> int result;
>
> switch (type) {
> @@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
> sense = !!sense;
>
> result = serial_ir_init();
> - if (result)
> - return result;
> -
> - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
> - if (!rcdev) {
> - result = -ENOMEM;
> - goto serial_cleanup;
> - }
> -
> - if (hardware[type].send_pulse && hardware[type].send_space)
> - rcdev->tx_ir = serial_ir_tx;
> - if (hardware[type].set_send_carrier)
> - rcdev->s_tx_carrier = serial_ir_tx_carrier;
> - if (hardware[type].set_duty_cycle)
> - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
> -
> - switch (type) {
> - case IR_HOMEBREW:
> - rcdev->input_name = "Serial IR type home-brew";
> - break;
> - case IR_IRDEO:
> - rcdev->input_name = "Serial IR type IRdeo";
> - break;
> - case IR_IRDEO_REMOTE:
> - rcdev->input_name = "Serial IR type IRdeo remote";
> - break;
> - case IR_ANIMAX:
> - rcdev->input_name = "Serial IR type AnimaX";
> - break;
> - case IR_IGOR:
> - rcdev->input_name = "Serial IR type IgorPlug";
> - break;
> - }
> -
> - rcdev->input_phys = KBUILD_MODNAME "/input0";
> - rcdev->input_id.bustype = BUS_HOST;
> - rcdev->input_id.vendor = 0x0001;
> - rcdev->input_id.product = 0x0001;
> - rcdev->input_id.version = 0x0100;
> - rcdev->open = serial_ir_open;
> - rcdev->close = serial_ir_close;
> - rcdev->dev.parent = &serial_ir.pdev->dev;
> - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
> - rcdev->driver_name = KBUILD_MODNAME;
> - rcdev->map_name = RC_MAP_RC6_MCE;
> - rcdev->min_timeout = 1;
> - rcdev->timeout = IR_DEFAULT_TIMEOUT;
> - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> - rcdev->rx_resolution = 250000;
> -
> - serial_ir.rcdev = rcdev;
> -
> - result = rc_register_device(rcdev);
> -
> if (!result)
> return 0;
> -serial_cleanup:
> +
> serial_ir_exit();
> return result;
> }
> @@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
> static void __exit serial_ir_exit_module(void)
> {
> del_timer_sync(&serial_ir.timeout_timer);
> - rc_unregister_device(serial_ir.rcdev);
> serial_ir_exit();
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
2017-02-25 13:34 ` Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: Sean Young
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
wfg-VuQAYsv1563Yd54FQh9/CA, Linus Torvalds, LKML,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Thomas Gleixner,
kernel test robot, LKP, Ingo Molnar,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean-hENCXIMQXOg@public.gmane.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
> >
> > Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> # 4.10
> > Signed-off-by: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
[mchehab-JsYNTwtnfakRB7SZvlqPiA@public.gmane.org: moved serial_ir_probe() back to its original place]
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> # 4.10
Signed-off-by: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab-JsYNTwtnfakRB7SZvlqPiA@public.gmane.org>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: Sean Young
Cc: Linus Torvalds, kernel test robot, Thomas Gleixner, Ingo Molnar,
Ruslan Ruslichenko, LKP, linux-input, linux-omap, kernel,
Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab@infradead.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean@mess.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
> >
> > Cc: <stable@vger.kernel.org> # 4.10
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean@mess.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
[mchehab@s-opensource.com: moved serial_ir_probe() back to its original place]
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: Sean Young
Cc: Linus Torvalds, kernel test robot, Thomas Gleixner, Ingo Molnar,
Ruslan Ruslichenko, LKP, linux-input, linux-omap, kernel,
Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab@infradead.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean@mess.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
> >
> > Cc: <stable@vger.kernel.org> # 4.10
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean@mess.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
[mchehab@s-opensource.com: moved serial_ir_probe() back to its original place]
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: linux-arm-kernel
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab@infradead.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean@mess.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
> >
> > Cc: <stable@vger.kernel.org> # 4.10
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean@mess.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
[mchehab at s-opensource.com: moved serial_ir_probe() back to its original place]
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: linus-amlogic
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab@infradead.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean@mess.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
> >
> > Cc: <stable@vger.kernel.org> # 4.10
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean@mess.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ at mail.gmail.com
[mchehab at s-opensource.com: moved serial_ir_probe() back to its original place]
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
@ 2017-02-25 13:54 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 100+ messages in thread
From: Mauro Carvalho Chehab @ 2017-02-25 13:54 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 6930 bytes --]
Em Sat, 25 Feb 2017 10:34:37 -0300
Mauro Carvalho Chehab <mchehab@infradead.org> escreveu:
> Em Sat, 25 Feb 2017 11:28:16 +0000
> Sean Young <sean@mess.org> escreveu:
>
> > When the interrupt requested with devm_request_irq(), serial_ir.rcdev
> > is still null so will cause null deference if the irq handler is called
> > early on.
> >
> > Also ensure that timeout_timer is setup.
> >
> > Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ(a)mail.gmail.com
> >
> > Cc: <stable@vger.kernel.org> # 4.10
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/serial_ir.c | 243 +++++++++++++++++++++----------------------
> > 1 file changed, 118 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
> > index 923fb22..22144b4 100644
> > --- a/drivers/media/rc/serial_ir.c
> > +++ b/drivers/media/rc/serial_ir.c
> > @@ -487,74 +487,6 @@ static void serial_ir_timeout(unsigned long arg)
> > ir_raw_event_handle(serial_ir.rcdev);
> > }
> >
> > -static int serial_ir_probe(struct platform_device *dev)
> > -{
> > - int i, nlow, nhigh, result;
>
> Hmm... why did you move this function to be after serial_ir_open()?
>
> That messes with the diff without no good reason, making harder to
> identify what you changed here.
Ok, just reordered it. The diff now looks sane. Patch looks ok on
my eyes.
[PATCH v2] serial_ir: ensure we're ready to receive interrupts
From: Sean Young <sean@mess.org>
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ(a)mail.gmail.com
[mchehab(a)s-opensource.com: moved serial_ir_probe() back to its original place]
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..4687c34c655a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -489,8 +489,59 @@ static void serial_ir_timeout(unsigned long arg)
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -516,9 +567,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
@@ -552,7 +600,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +772,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -754,63 +802,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
@@ -818,7 +812,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
^ permalink raw reply related [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-25 9:07 ` Ingo Molnar
` (2 preceding siblings ...)
(?)
@ 2017-02-25 18:02 ` Linus Torvalds
-1 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-25 18:02 UTC (permalink / raw)
To: Ingo Molnar
Cc: kernel test robot, Thomas Gleixner, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> So, should we revert the hw-retrigger change:
>
> a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
>
> ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> upstream straight away:
>
> Acked-by: Ingo Molnar <mingo@kernel.org>
So I'm in no huge hurry to revert that commit as long as we're still
in the merge window or early -rc's.
>From a debug standpoint, the spurious early interrupts are fine, and
hopefully will help us find more broken drivers.
It's just that I'd like to revert it before the actual 4.11 release,
unless we can find a better solution.
Because it really seems like the interrupt re-trigger is entirely
bogus. It's not an _actual_ "re-trigger the interrupt that may have
gotten lost", it's some code that ends up triggering it for no good
reason.
So I'd actually hope that we could figure out why IRQS_PENDING got
set, and perhaps fix the underlying cause?
There are several things that set IRQS_PENDING, ranging from "try to
test mis-routed interrupts while irqd was working", to "prepare for
suspend losing the irq for us", to "irq auto-probing uses it on
unassigned probable irqs".
The *actual* reason to re-send, namely getting a nested irq that we
had to drop because we got a second one while still handling the first
(or because it was disabled), is just one case.
Personally, I'd suspect some left-over state from auto-probing earlier
in the boot, but I don't know. Could we fix that underlying issue?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 18:02 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-25 18:02 UTC (permalink / raw)
To: Ingo Molnar
Cc: kernel test robot, Thomas Gleixner, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> So, should we revert the hw-retrigger change:
>
> a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
>
> ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> upstream straight away:
>
> Acked-by: Ingo Molnar <mingo@kernel.org>
So I'm in no huge hurry to revert that commit as long as we're still
in the merge window or early -rc's.
>From a debug standpoint, the spurious early interrupts are fine, and
hopefully will help us find more broken drivers.
It's just that I'd like to revert it before the actual 4.11 release,
unless we can find a better solution.
Because it really seems like the interrupt re-trigger is entirely
bogus. It's not an _actual_ "re-trigger the interrupt that may have
gotten lost", it's some code that ends up triggering it for no good
reason.
So I'd actually hope that we could figure out why IRQS_PENDING got
set, and perhaps fix the underlying cause?
There are several things that set IRQS_PENDING, ranging from "try to
test mis-routed interrupts while irqd was working", to "prepare for
suspend losing the irq for us", to "irq auto-probing uses it on
unassigned probable irqs".
The *actual* reason to re-send, namely getting a nested irq that we
had to drop because we got a second one while still handling the first
(or because it was disabled), is just one case.
Personally, I'd suspect some left-over state from auto-probing earlier
in the boot, but I don't know. Could we fix that underlying issue?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 18:02 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-25 18:02 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> So, should we revert the hw-retrigger change:
>
> a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
>
> ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> upstream straight away:
>
> Acked-by: Ingo Molnar <mingo@kernel.org>
So I'm in no huge hurry to revert that commit as long as we're still
in the merge window or early -rc's.
>From a debug standpoint, the spurious early interrupts are fine, and
hopefully will help us find more broken drivers.
It's just that I'd like to revert it before the actual 4.11 release,
unless we can find a better solution.
Because it really seems like the interrupt re-trigger is entirely
bogus. It's not an _actual_ "re-trigger the interrupt that may have
gotten lost", it's some code that ends up triggering it for no good
reason.
So I'd actually hope that we could figure out why IRQS_PENDING got
set, and perhaps fix the underlying cause?
There are several things that set IRQS_PENDING, ranging from "try to
test mis-routed interrupts while irqd was working", to "prepare for
suspend losing the irq for us", to "irq auto-probing uses it on
unassigned probable irqs".
The *actual* reason to re-send, namely getting a nested irq that we
had to drop because we got a second one while still handling the first
(or because it was disabled), is just one case.
Personally, I'd suspect some left-over state from auto-probing earlier
in the boot, but I don't know. Could we fix that underlying issue?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 18:02 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-25 18:02 UTC (permalink / raw)
To: linus-amlogic
On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> So, should we revert the hw-retrigger change:
>
> a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
>
> ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> upstream straight away:
>
> Acked-by: Ingo Molnar <mingo@kernel.org>
So I'm in no huge hurry to revert that commit as long as we're still
in the merge window or early -rc's.
>From a debug standpoint, the spurious early interrupts are fine, and
hopefully will help us find more broken drivers.
It's just that I'd like to revert it before the actual 4.11 release,
unless we can find a better solution.
Because it really seems like the interrupt re-trigger is entirely
bogus. It's not an _actual_ "re-trigger the interrupt that may have
gotten lost", it's some code that ends up triggering it for no good
reason.
So I'd actually hope that we could figure out why IRQS_PENDING got
set, and perhaps fix the underlying cause?
There are several things that set IRQS_PENDING, ranging from "try to
test mis-routed interrupts while irqd was working", to "prepare for
suspend losing the irq for us", to "irq auto-probing uses it on
unassigned probable irqs".
The *actual* reason to re-send, namely getting a nested irq that we
had to drop because we got a second one while still handling the first
(or because it was disabled), is just one case.
Personally, I'd suspect some left-over state from auto-probing earlier
in the boot, but I don't know. Could we fix that underlying issue?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-25 18:02 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-25 18:02 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1625 bytes --]
On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> So, should we revert the hw-retrigger change:
>
> a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
>
> ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> upstream straight away:
>
> Acked-by: Ingo Molnar <mingo@kernel.org>
So I'm in no huge hurry to revert that commit as long as we're still
in the merge window or early -rc's.
>From a debug standpoint, the spurious early interrupts are fine, and
hopefully will help us find more broken drivers.
It's just that I'd like to revert it before the actual 4.11 release,
unless we can find a better solution.
Because it really seems like the interrupt re-trigger is entirely
bogus. It's not an _actual_ "re-trigger the interrupt that may have
gotten lost", it's some code that ends up triggering it for no good
reason.
So I'd actually hope that we could figure out why IRQS_PENDING got
set, and perhaps fix the underlying cause?
There are several things that set IRQS_PENDING, ranging from "try to
test mis-routed interrupts while irqd was working", to "prepare for
suspend losing the irq for us", to "irq auto-probing uses it on
unassigned probable irqs".
The *actual* reason to re-send, namely getting a nested irq that we
had to drop because we got a second one while still handling the first
(or because it was disabled), is just one case.
Personally, I'd suspect some left-over state from auto-probing earlier
in the boot, but I don't know. Could we fix that underlying issue?
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-25 18:02 ` Linus Torvalds
` (3 preceding siblings ...)
(?)
@ 2017-02-27 10:09 ` Thomas Gleixner
-1 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: Linus Torvalds
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, LKML,
Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel test robot, LKP, Ingo Molnar,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 10:09 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo@kernel.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 10:09 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo@kernel.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 10:09 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo@kernel.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 10:09 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: linus-amlogic
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo@kernel.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 10:09 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 10:09 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1753 bytes --]
On Sat, 25 Feb 2017, Linus Torvalds wrote:
> On Sat, Feb 25, 2017 at 1:07 AM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > So, should we revert the hw-retrigger change:
> >
> > a9b4f08770b4 x86/ioapic: Restore IO-APIC irq_chip retrigger callback
> >
> > ... until we managed to fix CONFIG_DEBUG_SHIRQ=y? If you'd like to revert it
> > upstream straight away:
> >
> > Acked-by: Ingo Molnar <mingo@kernel.org>
>
> So I'm in no huge hurry to revert that commit as long as we're still
> in the merge window or early -rc's.
>
> From a debug standpoint, the spurious early interrupts are fine, and
> hopefully will help us find more broken drivers.
>
> It's just that I'd like to revert it before the actual 4.11 release,
> unless we can find a better solution.
>
> Because it really seems like the interrupt re-trigger is entirely
> bogus. It's not an _actual_ "re-trigger the interrupt that may have
> gotten lost", it's some code that ends up triggering it for no good
> reason.
>
> So I'd actually hope that we could figure out why IRQS_PENDING got
> set, and perhaps fix the underlying cause?
>
> There are several things that set IRQS_PENDING, ranging from "try to
> test mis-routed interrupts while irqd was working", to "prepare for
> suspend losing the irq for us", to "irq auto-probing uses it on
> unassigned probable irqs".
>
> The *actual* reason to re-send, namely getting a nested irq that we
> had to drop because we got a second one while still handling the first
> (or because it was disabled), is just one case.
>
> Personally, I'd suspect some left-over state from auto-probing earlier
> in the boot, but I don't know. Could we fix that underlying issue?
I'm on it.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 10:09 ` Thomas Gleixner
` (3 preceding siblings ...)
(?)
@ 2017-02-27 12:32 ` Thomas Gleixner
-1 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: Linus Torvalds
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra, LKML,
Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel test robot, LKP, Ingo Molnar,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared at that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 12:32 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared at that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 12:32 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared at that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 12:32 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared@that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 12:32 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: linus-amlogic
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared@that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 12:32 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 12:32 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 4756 bytes --]
On Mon, 27 Feb 2017, Thomas Gleixner wrote:
> On Sat, 25 Feb 2017, Linus Torvalds wrote:
> > There are several things that set IRQS_PENDING, ranging from "try to
> > test mis-routed interrupts while irqd was working", to "prepare for
> > suspend losing the irq for us", to "irq auto-probing uses it on
> > unassigned probable irqs".
> >
> > The *actual* reason to re-send, namely getting a nested irq that we
> > had to drop because we got a second one while still handling the first
> > (or because it was disabled), is just one case.
> >
> > Personally, I'd suspect some left-over state from auto-probing earlier
> > in the boot, but I don't know. Could we fix that underlying issue?
>
> I'm on it.
Adding a few trace points to the irq code gives me a pretty consistent
picture across a bunch of different machines.
The pending interrupt issue happens, at least on my test boxen, mostly on
the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
happen occasionally.
- Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
one of the affected machines this stops when the interrupt system is
switched to interrupt remapping !?!?!?
- Spurious interrupts on various interrupt lines, which are triggered by
IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
triggered when the IOAPIC >=16 interrupt fires.
- Spurious interrupt caused by driver probing itself. I.e. the driver
probing code causes an interrupt issued from the device
inadvertently. That happens even on IRQ >= 16.
This problem might be handled by the device driver code itself, but
that's going to be ugly. See below.
None of that was caused by misrouted irq or autoprobing. Autoprobing is not
used on any modern maschine at all and the misrouted mechanism cannot
set the pending flag on a interrupt which has no action installed.
Sure, we might not set the pending flag on spurious interrupts, when an
interrupt has no action assigned. We had it that way quite some years
ago. But that caused issues on a couple of (non x86) systems because the
peripheral which sent the spurious interrupt was waiting for
acknowledgement forever and therefor not sending new interrupts. There was
no way to handle that other than resending the interrupt after the action
was installed. The reason for this is the following race:
Device driver init()
ack_bogus_pending_irq_in_device();
<---- Device sends spurious interrupt
request_irq();
We cannot call ack_bogus_pending_irq_in_device() after the handler has been
installed because it might clear a real interrupt before the handler is
invoked. In fact we can, but that requires pretty ugly code. See below.
Yes, it's broken hardware, but in that area there is more broken than sane
hardware.
The other point here is, that the "IOAPIC triggers spurious interrupt on
legacy lines" issue can actually cause the same problem as the immediate
resend/retrigger:
request_irq();
<---- Other device sends IOAPIC interrupt which
triggers the legacy line.
If the handler is not prepared@that point, then it explodes as
well. Same for this odd IRQ0 -> IRQ7 trigger, which I can observe on two
machines.
The whole resend/retrigger business is only relevant for edge type
interrupts to deal with the following problem:
disable_irq();
<---- Device sends interrupt
enable_irq();
===> Previously sent interrupt has not been acked in the device so no
further interrupts happen. We lost an edge and are toast.
We never do the resend/retrigger for level type interrupts, because they
are resent by hardware if the interrupt is still pending, which is the case
when you don't acknowlegde it at the device level.
So now you might argue that a driver could handle this by doing:
disable_irq();
<---- Device sends interrupt
enable_irq();
lock_device();
do_some_magic_checks_and_handle_pending_irq();
unlock_device();
Requiring this would add tons of even more broken code to the device
drivers and I really doubt that we want to go there. Same for the
request_irq() case.
I rather prefer that drivers are able to deal with spurious interrupts even
on non shared interrupt lines and let the resend/retrigger mechanism expose
them early when they do not.
We can try to sample more data from the machines of affected users, but I
doubt that it will give us more information than confirming that we really
have to deal with all that hardware wreckage out there in some way or the
other.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 12:32 ` Thomas Gleixner
` (3 preceding siblings ...)
(?)
@ 2017-02-27 15:41 ` Ingo Molnar
-1 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: Thomas Gleixner
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra,
Linus Torvalds, LKML, Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel test robot, LKP,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
* Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 15:41 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Linus Torvalds, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
* Thomas Gleixner <tglx@linutronix.de> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 15:41 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Linus Torvalds, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
* Thomas Gleixner <tglx@linutronix.de> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 15:41 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: linux-arm-kernel
* Thomas Gleixner <tglx@linutronix.de> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 15:41 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: linus-amlogic
* Thomas Gleixner <tglx@linutronix.de> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 15:41 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-27 15:41 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2058 bytes --]
* Thomas Gleixner <tglx@linutronix.de> wrote:
> The pending interrupt issue happens, at least on my test boxen, mostly on
> the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> happen occasionally.
>
>
> - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> one of the affected machines this stops when the interrupt system is
> switched to interrupt remapping !?!?!?
>
> - Spurious interrupts on various interrupt lines, which are triggered by
> IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> triggered when the IOAPIC >=16 interrupt fires.
>
> - Spurious interrupt caused by driver probing itself. I.e. the driver
> probing code causes an interrupt issued from the device
> inadvertently. That happens even on IRQ >= 16.
>
> This problem might be handled by the device driver code itself, but
> that's going to be ugly. See below.
That's pretty colorful behavior...
> We can try to sample more data from the machines of affected users, but I doubt
> that it will give us more information than confirming that we really have to
> deal with all that hardware wreckage out there in some way or the other.
BTW., instead of trying to avoid the scenario, wow about moving in the other
direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
invocation of IRQ handlers at pretty much any moment. (We could also extend it a
bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
Because it's not the requirement that hurts primarily, but the resulting
non-determinism and the sporadic crashes. Which can be solved by making the race
deterministic via the debug facility.
If the IRQ handler crashed the moment it was first written by the driver author
we'd never see these problems.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 15:41 ` Ingo Molnar
` (3 preceding siblings ...)
(?)
@ 2017-02-27 16:07 ` Tony Lindgren
-1 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, devicetree, Ruslan Ruslichenko, linux-omap,
kernel, Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:07 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, devicetree, Ruslan Ruslichenko, linux-omap,
kernel, Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:07 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, devicetree, Ruslan Ruslichenko, linux-omap,
kernel, Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:07 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: linux-arm-kernel
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:07 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: linus-amlogic
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:07 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:07 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2736 bytes --]
* Ingo Molnar <mingo@kernel.org> [170227 07:44]:
>
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
This sounds a lot like what we saw few weeks ago with dwc3. See commit
12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in
probe"). It was caused by runtime PM and -EPROBE_DEFER, see the description
Grygorii wrote up in that commit.
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Just in case this is PM related.. Maybe the spurious interrupt is pending
from earlier? This could be caused by glitches on the lines with runtime PM,
or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
might provide more clues if the problem goes away.
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 15:41 ` Ingo Molnar
` (3 preceding siblings ...)
(?)
@ 2017-02-27 16:12 ` Thomas Gleixner
-1 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: Ingo Molnar
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra,
Linus Torvalds, LKML, Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel test robot, LKP,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:12 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:12 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: Ingo Molnar
Cc: Linus Torvalds, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:12 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:12 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: linus-amlogic
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:12 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:12 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 3442 bytes --]
On Mon, 27 Feb 2017, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > The pending interrupt issue happens, at least on my test boxen, mostly on
> > the 'legacy' interrupts (0 - 15). But even the IOAPIC interrupts >=16
> > happen occasionally.
> >
> >
> > - Spurious interrupts on IRQ7, which are triggered by IRQ 0 (PIT/HPET). On
> > one of the affected machines this stops when the interrupt system is
> > switched to interrupt remapping !?!?!?
> >
> > - Spurious interrupts on various interrupt lines, which are triggered by
> > IOAPIC interrupts >= IRQ16. That's a known issue on quite some chipsets
> > that the legacy PCI interrupt (which is used when IOAPIC is disabled) is
> > triggered when the IOAPIC >=16 interrupt fires.
> >
> > - Spurious interrupt caused by driver probing itself. I.e. the driver
> > probing code causes an interrupt issued from the device
> > inadvertently. That happens even on IRQ >= 16.
> >
> > This problem might be handled by the device driver code itself, but
> > that's going to be ugly. See below.
>
> That's pretty colorful behavior...
>
> > We can try to sample more data from the machines of affected users, but I doubt
> > that it will give us more information than confirming that we really have to
> > deal with all that hardware wreckage out there in some way or the other.
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so, i.e. requiring device driver IRQ handlers to handle the
> invocation of IRQ handlers at pretty much any moment. (We could also extend it a
> bit, such as invoking IRQ handlers early after suspend/resume wakeup.)
>
> Because it's not the requirement that hurts primarily, but the resulting
> non-determinism and the sporadic crashes. Which can be solved by making the race
> deterministic via the debug facility.
>
> If the IRQ handler crashed the moment it was first written by the driver author
> we'd never see these problems.
Yes, I'd love to do that. That's just a nightmare as well.
See commit 6d83f94db95cf, which added the _FIXME suffix to that code.
So recently I tried to invoke the primary handler, which causes another
issue:
Some of the low level code (e.g. IOAPIC interrupt migration, but also
some PPC irq chip machinery) depends on being called in hard interrupt
context. They invoke get_irq_regs(), which obviously does not work from
thread context.
So I removed that one from -next as well and postponed it another time. And
I should have known before I tried it that it does not work. Simply because
of that stuff x86 cannot use the software based resend mechanism.
Still trying to wrap my head around a proper solution for the problem. On
x86 we might just check whether we are really in hard irq context and
otherwise skip the part which depends on get_irq_regs(). That would be a
sane thing to do. Have not yet looked at the PPC side of affairs, whether
that's easy to solve as well. But even if it is, then there might be still
other magic code in some irq chip drivers which relies on things which are
only available/correct when actually invoked by a hardware interrupt.
Not only the hardware has colorful behaviour ....
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 16:07 ` Tony Lindgren
` (3 preceding siblings ...)
(?)
@ 2017-02-27 16:18 ` Thomas Gleixner
-1 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: Tony Lindgren
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
kernel test robot, kernel-F5mvAk5X5gdBDgjK7y7TUQ, Sean Young,
Peter Zijlstra, LKP, LKML, Mauro Carvalho Chehab,
wfg-VuQAYsv1563Yd54FQh9/CA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA, Linus Torvalds, Ingo Molnar,
Linux LED Subsystem, Linux Media Mailing List
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:18 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: Tony Lindgren
Cc: Ingo Molnar, devicetree, Ruslan Ruslichenko, linux-omap, kernel,
Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:18 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: Tony Lindgren
Cc: Ingo Molnar, devicetree, Ruslan Ruslichenko, linux-omap, kernel,
Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:18 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:18 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: linus-amlogic
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:18 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-27 16:18 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1328 bytes --]
On Mon, 27 Feb 2017, Tony Lindgren wrote:
> * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > Because it's not the requirement that hurts primarily, but the resulting
> > non-determinism and the sporadic crashes. Which can be solved by making the race
> > deterministic via the debug facility.
> >
> > If the IRQ handler crashed the moment it was first written by the driver author
> > we'd never see these problems.
>
> Just in case this is PM related.. Maybe the spurious interrupt is pending
> from earlier? This could be caused by glitches on the lines with runtime PM,
> or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> might provide more clues if the problem goes away.
It's not PM related. That's just silly hardware. At the moment when you
enable some magic bit in the control register, which is required to probe
the version, the fricking thing spits out a spurious interrupt despite the
interrupt enable bit in the same control register being still disabled. Of
course we cannot install an interrupt handler before having probed the
version and setup other stuff, except we add magic 'if (!initialized)'
crappola into the handler and lose the ability to install version dependent
handlers afterwards.
Wonderful crap that, isn't it?
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 16:18 ` Thomas Gleixner
` (3 preceding siblings ...)
(?)
@ 2017-02-27 16:26 ` Tony Lindgren
-1 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Ingo Molnar, devicetree, Ruslan Ruslichenko, linux-omap, kernel,
Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:26 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Ingo Molnar, devicetree, Ruslan Ruslichenko, linux-omap, kernel,
Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:26 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Ingo Molnar, devicetree, Ruslan Ruslichenko, linux-omap, kernel,
Sean Young, wfg, Peter Zijlstra, Linus Torvalds, LKML,
Mauro Carvalho Chehab, linux-mediatek, Linux LED Subsystem,
linux-input, linux-amlogic, kernel test robot, LKP,
linux-arm-kernel, Linux Media Mailing List
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:26 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: linux-arm-kernel
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:26 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: linus-amlogic
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 16:26 ` Tony Lindgren
0 siblings, 0 replies; 100+ messages in thread
From: Tony Lindgren @ 2017-02-27 16:26 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]
* Thomas Gleixner <tglx@linutronix.de> [170227 08:20]:
> On Mon, 27 Feb 2017, Tony Lindgren wrote:
> > * Ingo Molnar <mingo@kernel.org> [170227 07:44]:
> > > Because it's not the requirement that hurts primarily, but the resulting
> > > non-determinism and the sporadic crashes. Which can be solved by making the race
> > > deterministic via the debug facility.
> > >
> > > If the IRQ handler crashed the moment it was first written by the driver author
> > > we'd never see these problems.
> >
> > Just in case this is PM related.. Maybe the spurious interrupt is pending
> > from earlier? This could be caused by glitches on the lines with runtime PM,
> > or a pending interrupt during suspend/resume. In that case IRQ_DISABLE_UNLAZY
> > might provide more clues if the problem goes away.
>
> It's not PM related. That's just silly hardware. At the moment when you
> enable some magic bit in the control register, which is required to probe
> the version, the fricking thing spits out a spurious interrupt despite the
> interrupt enable bit in the same control register being still disabled. Of
> course we cannot install an interrupt handler before having probed the
> version and setup other stuff, except we add magic 'if (!initialized)'
> crappola into the handler and lose the ability to install version dependent
> handlers afterwards.
OK and presumably no -EPROBE_DEFER happening either.
> Wonderful crap that, isn't it?
Sounds broken..
Regards,
Tony
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 15:41 ` Ingo Molnar
` (3 preceding siblings ...)
(?)
@ 2017-02-27 19:23 ` Linus Torvalds
-1 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: Ingo Molnar
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra, LKML,
Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Thomas Gleixner,
kernel test robot, LKP,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 19:23 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 19:23 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 19:23 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 19:23 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: linus-amlogic
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-27 19:23 ` Linus Torvalds
0 siblings, 0 replies; 100+ messages in thread
From: Linus Torvalds @ 2017-02-27 19:23 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2046 bytes --]
On Mon, Feb 27, 2017 at 7:41 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> BTW., instead of trying to avoid the scenario, wow about moving in the other
> direction: making CONFIG_DEBUG_SHIRQ=y unconditional property in the IRQ core code
> starting from v4.12 or so
The problem is that it's generally almost undebuggable ahead of time
by developers, and most users won't be able to do good reports either,
because the symptom is geberally a boot-time crash, often with no
logs.
So this option is *not* good for actual users. It's been tried before.
It's a wonderful thing for developers to run with to make sure the
drivers they are working on are resilient to this problem, but we have
too many legacy drivers and lots of random users, and it's unrealistic
to expect them to handle it.
In other words: what will happen is that distros start getting bootup
problem reports six months or a year after we've done it, and *if*
they figure out it's the irq enabling, they'll disable it, because
they have no way to solve it either.
And core developers will just maybe see the occasional "4.12 doesn't
boot for me" reports, but by then developers will ahve moved on to
4.16 or something.
So I don't disagree that in a perfect world all drivers should just
handle it. It's just that it's not realistic.
The fact that we have now *twice* gotten an oops report or a "this
machine doesn't boot" report etc within a week or so of merging the
problematic patch does *not* indicate that it's easy to fix or rare.
Quite the reverse.
It indicates that it's just rare enough that core developers don't see
it, but it's common enough to have triggered issues in random places.
And it will just get *much* worse when you then get the random
end-users that usually have older machines than the developers who
actually test daily development -git trees.
Then we'll just hit *other* random places, and without having testers
that are competent and willing or able to bisect or debug.
Linus
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 19:23 ` Linus Torvalds
` (3 preceding siblings ...)
(?)
@ 2017-02-28 7:25 ` Ingo Molnar
-1 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: Linus Torvalds
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra, LKML,
Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Thomas Gleixner,
kernel test robot, LKP,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
* Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 7:25 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: Linus Torvalds
Cc: Thomas Gleixner, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 7:25 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: Linus Torvalds
Cc: Thomas Gleixner, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 7:25 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: linux-arm-kernel
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 7:25 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: linus-amlogic
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 7:25 ` Ingo Molnar
0 siblings, 0 replies; 100+ messages in thread
From: Ingo Molnar @ 2017-02-28 7:25 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2071 bytes --]
* Linus Torvalds <torvalds@linux-foundation.org> wrote:
> In other words: what will happen is that distros start getting bootup problem
> reports six months or a year after we've done it, and *if* they figure out it's
> the irq enabling, they'll disable it, because they have no way to solve it
> either.
>
> And core developers will just maybe see the occasional "4.12 doesn't boot for
> me" reports, but by then developers will ahve moved on to 4.16 or something.
Yeah, you are right, there's over 2,100 request_irq() calls in the kernel and
perhaps only 1% of them gets tested on real hardware by the time a change gets
upstream :-/
So in theory we could require all *new* drivers handle this properly, as new
drivers tend to come through developers who can fix such bugs - which would at
least guarantee that with time the problem would obsolete itself.
But I cannot see an easy non-intrusive way to do that - we'd have to rename all
existing request_irq() calls:
- We could rename request_irq() to request_irq_legacy() - which does not do the
tests.
- The 'new' request_irq() function would do the tests unconditionally.
... and that's just too much churn - unless you think it's worth it, or if anyone
can think of a better method to phase in the new behavior without affecting old
users.
Another, less intrusive method would be to introduce a new request_irq_shared()
API call, mark request_irq() obsolete (without putting warnings into the build
though), and put a check into checkpatch that warns about request_irq() use.
The flip side would be that:
- request_irq() is such a nice and well-known name to waste
- plus request_irq_shared() is a misnomer, as this has nothing to do with sharing
IRQs, it's about getting IRQs in unexpected moments.
I'd rather do the renaming that is easy to automate and the pain is one time only.
Or revert the retrigger change and muddle through, although as per Thomas's
observations spurious interrupts are very common.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
2017-02-27 19:23 ` Linus Torvalds
` (3 preceding siblings ...)
(?)
@ 2017-02-28 10:51 ` Thomas Gleixner
-1 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: Linus Torvalds
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Ruslan Ruslichenko,
linux-omap-u79uwXL29TY76Z2rM5mHXA, kernel-F5mvAk5X5gdBDgjK7y7TUQ,
Sean Young, wfg-VuQAYsv1563Yd54FQh9/CA, Peter Zijlstra, LKML,
Mauro Carvalho Chehab,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux LED Subsystem, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel test robot, LKP, Ingo Molnar,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 10:51 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 10:51 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, kernel test robot, Mauro Carvalho Chehab,
Sean Young, Ruslan Ruslichenko, LKP, linux-input, linux-omap,
kernel, Linux Media Mailing List, linux-mediatek, linux-amlogic,
linux-arm-kernel, devicetree, Linux LED Subsystem, LKML, wfg,
Peter Zijlstra
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 10:51 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 10:51 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: linus-amlogic
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
* Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
@ 2017-02-28 10:51 ` Thomas Gleixner
0 siblings, 0 replies; 100+ messages in thread
From: Thomas Gleixner @ 2017-02-28 10:51 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2708 bytes --]
On Mon, 27 Feb 2017, Linus Torvalds wrote:
> So I don't disagree that in a perfect world all drivers should just
> handle it. It's just that it's not realistic.
>
> The fact that we have now *twice* gotten an oops report or a "this
> machine doesn't boot" report etc within a week or so of merging the
> problematic patch does *not* indicate that it's easy to fix or rare.
>
> Quite the reverse.
>
> It indicates that it's just rare enough that core developers don't see
> it, but it's common enough to have triggered issues in random places.
>
> And it will just get *much* worse when you then get the random
> end-users that usually have older machines than the developers who
> actually test daily development -git trees.
I tend to disagree.
The retrigger mechanism has been there forever, at least the history git
tree which goes back to 2.5.0 has it and as it was in the initial commit is
it was there in 2.4 already.
We broke that in 4.2 when the x86 interrupt mechanism was reworked
completely. That went pretty much unnoticed until somebody moved from 4.1
to 4.9 and discovered that edge interrupts got lost. It's not surprising
that it went unnoticed because lots of stuff moved towards MSI (which has
the retrigger still enabled) and the devices which are prone to the 'lost
edge' issue are limited.
So we had that retrigger exposing crappy older drivers to the spurious
interrupt until 2 years ago. The two drivers which have been exposed by
bringing the retrigger back are post 4.2 or have been wreckaged post 4.2.
Due to the fact that the old drivers have been exposed over many years to
the spurious retrigger (that "feature" exists on old hardware as well) I
don't think it's much of a problem.
We also had the DEBUG_SHIRQ active until we had to disable it in
6d83f94db95cf (2.6.38) but not because it exposed crappy interrupt
handlers. We had to disable due to a functional problem described in the
commit message. I know for sure that distros had enabled DEBUG_SHIRQ (and
some still have the reduced functionality of it enabled).
What I find more problematic is:
- to keep this 'lost edge' regression around, which really can render
hardware useless.
- to ignore the fact that these buggy interrupt handlers can be exposed by
spurious interrupt events (as I showed in the other mail) "naturaly",
but with a way smaller probability. If a user runs into such a spurious
problem he has absolutely NO chance to debug it at all. Exposing it by
the retrigger mechanism makes the detection more "reliable" and allows
debugging it. The backtraces are pretty telling and clear.
Thanks,
tglx
^ permalink raw reply [flat|nested] 100+ messages in thread
end of thread, other threads:[~2017-02-28 13:52 UTC | newest]
Thread overview: 100+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-24 18:28 [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c kernel test robot
2017-02-24 18:28 ` kernel test robot
2017-02-24 18:28 ` kernel test robot
2017-02-24 18:28 ` kernel test robot
2017-02-24 19:15 ` Linus Torvalds
2017-02-24 19:15 ` Linus Torvalds
2017-02-24 19:15 ` Linus Torvalds
2017-02-24 19:15 ` Linus Torvalds
2017-02-24 19:15 ` Linus Torvalds
2017-02-25 9:07 ` Ingo Molnar
2017-02-25 9:07 ` Ingo Molnar
2017-02-25 9:07 ` Ingo Molnar
2017-02-25 9:07 ` Ingo Molnar
2017-02-25 9:07 ` Ingo Molnar
2017-02-25 18:02 ` Linus Torvalds
2017-02-25 18:02 ` Linus Torvalds
2017-02-25 18:02 ` Linus Torvalds
2017-02-25 18:02 ` Linus Torvalds
2017-02-25 18:02 ` Linus Torvalds
[not found] ` <CA+55aFy+ER8cYV02eZsKAOLnZBWY96zNWqUFWSWT1+3sZD4XnQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 10:09 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 12:32 ` Thomas Gleixner
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 15:41 ` Ingo Molnar
2017-02-27 16:07 ` Tony Lindgren
2017-02-27 16:07 ` Tony Lindgren
2017-02-27 16:07 ` Tony Lindgren
2017-02-27 16:07 ` Tony Lindgren
2017-02-27 16:07 ` Tony Lindgren
2017-02-27 16:07 ` Tony Lindgren
[not found] ` <20170227160750.GM21809-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:18 ` Thomas Gleixner
2017-02-27 16:26 ` Tony Lindgren
2017-02-27 16:26 ` Tony Lindgren
2017-02-27 16:26 ` Tony Lindgren
2017-02-27 16:26 ` Tony Lindgren
2017-02-27 16:26 ` Tony Lindgren
2017-02-27 16:26 ` Tony Lindgren
[not found] ` <20170227154124.GA20569-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 16:12 ` Thomas Gleixner
2017-02-27 19:23 ` Linus Torvalds
2017-02-27 19:23 ` Linus Torvalds
2017-02-27 19:23 ` Linus Torvalds
2017-02-27 19:23 ` Linus Torvalds
2017-02-27 19:23 ` Linus Torvalds
2017-02-27 19:23 ` Linus Torvalds
[not found] ` <CA+55aFxwtkOs95R-v7z8yjguvp91oDTxRKs-x3uN_=sM_33Gvg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 7:25 ` Ingo Molnar
2017-02-28 10:51 ` Thomas Gleixner
2017-02-28 10:51 ` Thomas Gleixner
2017-02-28 10:51 ` Thomas Gleixner
2017-02-28 10:51 ` Thomas Gleixner
2017-02-28 10:51 ` Thomas Gleixner
2017-02-28 10:51 ` Thomas Gleixner
2017-02-25 11:14 ` Sean Young
2017-02-25 11:14 ` Sean Young
2017-02-25 11:14 ` Sean Young
2017-02-25 11:14 ` Sean Young
2017-02-25 11:14 ` Sean Young
2017-02-25 11:28 ` [PATCH] [media] serial_ir: ensure we're ready to receive interrupts Sean Young
2017-02-25 11:28 ` Sean Young
2017-02-25 11:28 ` Sean Young
2017-02-25 11:28 ` Sean Young
[not found] ` <20170225112816.GA7981-3XSxi2G4b3iXFJAUJl40Xg@public.gmane.org>
2017-02-25 13:34 ` Mauro Carvalho Chehab
2017-02-25 13:34 ` Mauro Carvalho Chehab
2017-02-25 13:34 ` Mauro Carvalho Chehab
2017-02-25 13:34 ` Mauro Carvalho Chehab
2017-02-25 13:34 ` Mauro Carvalho Chehab
2017-02-25 13:34 ` Mauro Carvalho Chehab
[not found] ` <20170225103437.58c5a199-ch4gOOMV7nf/PtFMR13I2A@public.gmane.org>
2017-02-25 13:54 ` Mauro Carvalho Chehab
2017-02-25 13:54 ` Mauro Carvalho Chehab
2017-02-25 13:54 ` Mauro Carvalho Chehab
2017-02-25 13:54 ` Mauro Carvalho Chehab
2017-02-25 13:54 ` Mauro Carvalho Chehab
2017-02-25 13:54 ` Mauro Carvalho Chehab
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.